/* Target-dependent header for the MIPS architecture, for GDB, the GNU Debugger.
- Copyright (C) 2002, 2003, 2007, 2008 Free Software Foundation, Inc.
+ Copyright (C) 2002-2020 Free Software Foundation, Inc.
This file is part of GDB.
#ifndef MIPS_TDEP_H
#define MIPS_TDEP_H
+#include "objfiles.h"
+
struct gdbarch;
-/* All the possible MIPS ABIs. */
+/* All the possible MIPS ABIs. */
enum mips_abi
{
MIPS_ABI_UNKNOWN = 0,
/* Return the MIPS ABI associated with GDBARCH. */
enum mips_abi mips_abi (struct gdbarch *gdbarch);
+/* Base and compressed MIPS ISA variations. */
+enum mips_isa
+ {
+ ISA_MIPS = -1, /* mips_compression_string depends on it. */
+ ISA_MIPS16,
+ ISA_MICROMIPS
+ };
+
+/* Corresponding MSYMBOL_TARGET_FLAG aliases. */
+#define MSYMBOL_TARGET_FLAG_MIPS16 MSYMBOL_TARGET_FLAG_1
+#define MSYMBOL_TARGET_FLAG_MICROMIPS MSYMBOL_TARGET_FLAG_2
+
/* Return the MIPS ISA's register size. Just a short cut to the BFD
architecture's word size. */
extern int mips_isa_regsize (struct gdbarch *gdbarch);
int cause; /* Describes last exception. */
int hi; /* Multiply/divide temp. */
int lo; /* ... */
+ int dspacc; /* SmartMIPS/DSP accumulators. */
+ int dspctl; /* DSP control. */
};
extern const struct mips_regnum *mips_regnum (struct gdbarch *gdbarch);
+/* Some MIPS boards don't support floating point while others only
+ support single-precision floating-point operations. */
+
+enum mips_fpu_type
+{
+ MIPS_FPU_DOUBLE, /* Full double precision floating point. */
+ MIPS_FPU_SINGLE, /* Single precision floating point (R4650). */
+ MIPS_FPU_NONE /* No floating point. */
+};
+
+/* MIPS specific per-architecture information. */
+struct gdbarch_tdep
+{
+ /* from the elf header */
+ int elf_flags;
+
+ /* mips options */
+ enum mips_abi mips_abi;
+ enum mips_abi found_abi;
+ enum mips_isa mips_isa;
+ enum mips_fpu_type mips_fpu_type;
+ int mips_last_arg_regnum;
+ int mips_last_fp_arg_regnum;
+ int default_mask_address_p;
+ /* Is the target using 64-bit raw integer registers but only
+ storing a left-aligned 32-bit value in each? */
+ int mips64_transfers_32bit_regs_p;
+ /* Indexes for various registers. IRIX and embedded have
+ different values. This contains the "public" fields. Don't
+ add any that do not need to be public. */
+ const struct mips_regnum *regnum;
+ /* Register names table for the current register set. */
+ const char **mips_processor_reg_names;
+
+ /* The size of register data available from the target, if known.
+ This doesn't quite obsolete the manual
+ mips64_transfers_32bit_regs_p, since that is documented to force
+ left alignment even for big endian (very strange). */
+ int register_size_valid_p;
+ int register_size;
+
+ /* Return the expected next PC if FRAME is stopped at a syscall
+ instruction. */
+ CORE_ADDR (*syscall_next_pc) (struct frame_info *frame);
+};
+
/* Register numbers of various important registers. */
enum
MIPS_ZERO_REGNUM = 0, /* Read-only register, always 0. */
MIPS_AT_REGNUM = 1,
MIPS_V0_REGNUM = 2, /* Function integer return value. */
- MIPS_A0_REGNUM = 4, /* Loc of first arg during a subr call */
+ MIPS_A0_REGNUM = 4, /* Loc of first arg during a subr call. */
+ MIPS_S2_REGNUM = 18, /* Contains return address in MIPS16 thunks. */
MIPS_T9_REGNUM = 25, /* Contains address of callee in PIC. */
+ MIPS_GP_REGNUM = 28,
MIPS_SP_REGNUM = 29,
MIPS_RA_REGNUM = 31,
MIPS_PS_REGNUM = 32, /* Contains processor status. */
MIPS_EMBED_CAUSE_REGNUM = 36,
MIPS_EMBED_PC_REGNUM = 37,
MIPS_EMBED_FP0_REGNUM = 38,
- MIPS_UNUSED_REGNUM = 73, /* Never used, FIXME */
+ MIPS_UNUSED_REGNUM = 73, /* Never used, FIXME. */
MIPS_FIRST_EMBED_REGNUM = 74, /* First CP0 register for embedded use. */
MIPS_PRID_REGNUM = 89, /* Processor ID. */
MIPS_LAST_EMBED_REGNUM = 89 /* Last one. */
};
-/* Defined in mips-tdep.c and used in remote-mips.c */
-extern void deprecated_mips_set_processor_regs_hack (void);
-
/* Instruction sizes and other useful constants. */
enum
{
};
/* Single step based on where the current instruction will take us. */
-extern int mips_software_single_step (struct frame_info *frame);
+extern std::vector<CORE_ADDR> mips_software_single_step
+ (struct regcache *regcache);
+
+/* Strip the ISA (compression) bit off from ADDR. */
+extern CORE_ADDR mips_unmake_compact_addr (CORE_ADDR addr);
+
+/* Tell if the program counter value in MEMADDR is in a standard
+ MIPS function. */
+extern int mips_pc_is_mips (bfd_vma memaddr);
/* Tell if the program counter value in MEMADDR is in a MIPS16
function. */
-extern int mips_pc_is_mips16 (bfd_vma memaddr);
+extern int mips_pc_is_mips16 (struct gdbarch *gdbarch, bfd_vma memaddr);
+
+/* Tell if the program counter value in MEMADDR is in a microMIPS
+ function. */
+extern int mips_pc_is_micromips (struct gdbarch *gdbarch, bfd_vma memaddr);
-/* Return the currently configured (or set) saved register size. */
+/* Return the currently configured (or set) saved register size. */
extern unsigned int mips_abi_regsize (struct gdbarch *gdbarch);
+/* Make PC the address of the next instruction to execute. */
+extern void mips_write_pc (struct regcache *regcache, CORE_ADDR pc);
+
/* Target descriptions which only indicate the size of general
registers. */
extern struct target_desc *mips_tdesc_gp32;
extern struct target_desc *mips_tdesc_gp64;
+/* Return non-zero if PC is in a MIPS SVR4 lazy binding stub section. */
+
+static inline int
+in_mips_stubs_section (CORE_ADDR pc)
+{
+ return pc_in_section (pc, ".MIPS.stubs");
+}
+
#endif /* MIPS_TDEP_H */