-/* Target-dependent code for the Matsushita MN10300 for GDB, the GNU debugger.\r
-\r
- Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free\r
- Software Foundation, Inc.\r
-\r
- This file is part of GDB.\r
-\r
- This program is free software; you can redistribute it and/or modify\r
- it under the terms of the GNU General Public License as published by\r
- the Free Software Foundation; either version 2 of the License, or\r
- (at your option) any later version.\r
-\r
- This program is distributed in the hope that it will be useful,\r
- but WITHOUT ANY WARRANTY; without even the implied warranty of\r
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\r
- GNU General Public License for more details.\r
-\r
- You should have received a copy of the GNU General Public License\r
- along with this program; if not, write to the Free Software\r
- Foundation, Inc., 59 Temple Place - Suite 330,\r
- Boston, MA 02111-1307, USA. */\r
-\r
-/* MVS Notes:\r
-\r
- To get from 1.1 to 1.2, add:\r
- use_struct_convention\r
- store_return_value\r
- extract_return_value\r
- extract_struct_value_address\r
- \r
- Make sure to use regcache. */\r
-\r
-/* MVS Notes:\r
-\r
- Apparently cannot run without a stub placeholder for unwind_dummy_id. \r
-*/\r
-\r
-/* MVS Notes:\r
-\r
- To get from 1.2 to 1.3, add:\r
- read_pc, write_pc\r
- frame_unwind_init\r
- struct mn10300_unwind_cache\r
- unwind_pc\r
- unwind_dummy_id\r
- frame_this_id\r
- frame_prev_register\r
- frame_sniffer (struct mn10300_frame_unwind)\r
-*/\r
-\r
-#include "defs.h"\r
-#include "arch-utils.h"\r
-#include "dis-asm.h"\r
-#include "gdbtypes.h"\r
-#include "regcache.h"\r
-#include "gdb_string.h"\r
-#include "gdb_assert.h"\r
-#include "frame.h"\r
-#include "frame-unwind.h"\r
-#include "frame-base.h"\r
-#include "trad-frame.h"\r
-#include "symtab.h"\r
-#include "dwarf2-frame.h"\r
-#include "regcache.h"\r
-\r
-#include "mn10300-tdep.h"\r
-\r
-enum {\r
- E_D0_REGNUM = 0,\r
- E_D1_REGNUM = 1,\r
- E_D2_REGNUM = 2,\r
- E_D3_REGNUM = 3,\r
- E_A0_REGNUM = 4,\r
- E_A1_REGNUM = 5,\r
- E_A2_REGNUM = 6,\r
- E_A3_REGNUM = 7,\r
- E_SP_REGNUM = 8,\r
- E_PC_REGNUM = 9,\r
- E_MDR_REGNUM = 10,\r
- E_PSW_REGNUM = 11,\r
- E_LIR_REGNUM = 12,\r
- E_LAR_REGNUM = 13,\r
- E_MDRQ_REGNUM = 14,\r
- E_E0_REGNUM = 15,\r
- E_MCRH_REGNUM = 26,\r
- E_MCRL_REGNUM = 27,\r
- E_MCVF_REGNUM = 28,\r
- E_NUM_REGS = 32\r
-};\r
-\r
-\r
-/* Compute the alignment required by a type. */\r
-\r
-static int\r
-mn10300_type_align (struct type *type)\r
-{\r
- int i, align = 1;\r
-\r
- switch (TYPE_CODE (type))\r
- {\r
- case TYPE_CODE_INT:\r
- case TYPE_CODE_ENUM:\r
- case TYPE_CODE_SET:\r
- case TYPE_CODE_RANGE:\r
- case TYPE_CODE_CHAR:\r
- case TYPE_CODE_BOOL:\r
- case TYPE_CODE_FLT:\r
- case TYPE_CODE_PTR:\r
- case TYPE_CODE_REF:\r
- return TYPE_LENGTH (type);\r
-\r
- case TYPE_CODE_COMPLEX:\r
- return TYPE_LENGTH (type) / 2;\r
-\r
- case TYPE_CODE_STRUCT:\r
- case TYPE_CODE_UNION:\r
- for (i = 0; i < TYPE_NFIELDS (type); i++)\r
- {\r
- int falign = mn10300_type_align (TYPE_FIELD_TYPE (type, i));\r
- while (align < falign)\r
- align <<= 1;\r
- }\r
- return align;\r
-\r
- case TYPE_CODE_ARRAY:\r
- /* HACK! Structures containing arrays, even small ones, are not\r
- elligible for returning in registers. */\r
- return 256;\r
-\r
- case TYPE_CODE_TYPEDEF:\r
- return mn10300_type_align (check_typedef (type));\r
-\r
- default:\r
- internal_error (__FILE__, __LINE__, "bad switch");\r
- }\r
-}\r
-\r
-/* MVS note this is deprecated. */\r
-/* Should call_function allocate stack space for a struct return? */\r
-/* gcc_p unused */\r
-static int\r
-mn10300_use_struct_convention (int gcc_p, struct type *type)\r
-{\r
- /* Structures bigger than a pair of words can't be returned in\r
- registers. */\r
- if (TYPE_LENGTH (type) > 8)\r
- return 1;\r
-\r
- switch (TYPE_CODE (type))\r
- {\r
- case TYPE_CODE_STRUCT:\r
- case TYPE_CODE_UNION:\r
- /* Structures with a single field are handled as the field\r
- itself. */\r
- if (TYPE_NFIELDS (type) == 1)\r
- return mn10300_use_struct_convention (gcc_p, \r
- TYPE_FIELD_TYPE (type, 0));\r
-\r
- /* Structures with word or double-word size are passed in memory, as\r
- long as they require at least word alignment. */\r
- if (mn10300_type_align (type) >= 4)\r
- return 0;\r
-\r
- return 1;\r
-\r
- /* Arrays are addressable, so they're never returned in\r
- registers. This condition can only hold when the array is\r
- the only field of a struct or union. */\r
- case TYPE_CODE_ARRAY:\r
- return 1;\r
-\r
- case TYPE_CODE_TYPEDEF:\r
- return mn10300_use_struct_convention (gcc_p, check_typedef (type));\r
-\r
- default:\r
- return 0;\r
- }\r
-}\r
-\r
-/* MVS note this is deprecated. */\r
-static void\r
-mn10300_store_return_value (struct type *type,\r
- struct regcache *regcache, const void *valbuf)\r
-{\r
- struct gdbarch *gdbarch = get_regcache_arch (regcache);\r
- int len = TYPE_LENGTH (type);\r
- int reg, regsz;\r
- \r
- if (TYPE_CODE (type) == TYPE_CODE_PTR)\r
- reg = 4;\r
- else\r
- reg = 0;\r
-\r
- regsz = register_size (gdbarch, reg);\r
-\r
- if (len <= regsz)\r
- regcache_raw_write_part (regcache, reg, 0, len, valbuf);\r
- else if (len <= 2 * regsz)\r
- {\r
- regcache_raw_write (regcache, reg, valbuf);\r
- gdb_assert (regsz == register_size (gdbarch, reg + 1));\r
- regcache_raw_write_part (regcache, reg+1, 0,\r
- len - regsz, (char *) valbuf + regsz);\r
- }\r
- else\r
- internal_error (__FILE__, __LINE__,\r
- "Cannot store return value %d bytes long.", len);\r
-}\r
-\r
-/* MVS note deprecated. */\r
-static void\r
-mn10300_extract_return_value (struct type *type,\r
- struct regcache *regcache, void *valbuf)\r
-{\r
- struct gdbarch *gdbarch = get_regcache_arch (regcache);\r
- char buf[MAX_REGISTER_SIZE];\r
- int len = TYPE_LENGTH (type);\r
- int reg, regsz;\r
-\r
- if (TYPE_CODE (type) == TYPE_CODE_PTR)\r
- reg = 4;\r
- else\r
- reg = 0;\r
-\r
- regsz = register_size (gdbarch, reg);\r
- if (len <= regsz)\r
- {\r
- regcache_raw_read (regcache, reg, buf);\r
- memcpy (valbuf, buf, len);\r
- }\r
- else if (len <= 2 * regsz)\r
- {\r
- regcache_raw_read (regcache, reg, buf);\r
- memcpy (valbuf, buf, regsz);\r
- gdb_assert (regsz == register_size (gdbarch, reg + 1));\r
- regcache_raw_read (regcache, reg + 1, buf);\r
- memcpy ((char *) valbuf + regsz, buf, len - regsz);\r
- }\r
- else\r
- internal_error (__FILE__, __LINE__,\r
- "Cannot extract return value %d bytes long.", len);\r
-}\r
-\r
-static char *\r
-register_name (int reg, char **regs, long sizeof_regs)\r
-{\r
- if (reg < 0 || reg >= sizeof_regs / sizeof (regs[0]))\r
- return NULL;\r
- else\r
- return regs[reg];\r
-}\r
-\r
-static const char *\r
-mn10300_generic_register_name (int reg)\r
-{\r
- static char *regs[] =\r
- { "d0", "d1", "d2", "d3", "a0", "a1", "a2", "a3",\r
- "sp", "pc", "mdr", "psw", "lir", "lar", "", "",\r
- "", "", "", "", "", "", "", "",\r
- "", "", "", "", "", "", "", "fp"\r
- };\r
- return register_name (reg, regs, sizeof regs);\r
-}\r
-\r
-\r
-static const char *\r
-am33_register_name (int reg)\r
-{\r
- static char *regs[] =\r
- { "d0", "d1", "d2", "d3", "a0", "a1", "a2", "a3",\r
- "sp", "pc", "mdr", "psw", "lir", "lar", "",\r
- "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",\r
- "ssp", "msp", "usp", "mcrh", "mcrl", "mcvf", "", "", ""\r
- };\r
- return register_name (reg, regs, sizeof regs);\r
-}\r
-\r
-\r
-static struct type *\r
-mn10300_register_type (struct gdbarch *gdbarch, int reg)\r
-{\r
- return builtin_type_int;\r
-}\r
-\r
-static CORE_ADDR\r
-mn10300_read_pc (ptid_t ptid)\r
-{\r
- return read_register_pid (E_PC_REGNUM, ptid);\r
-}\r
-\r
-static void\r
-mn10300_write_pc (CORE_ADDR val, ptid_t ptid)\r
-{\r
- return write_register_pid (E_PC_REGNUM, val, ptid);\r
-}\r
-\r
-/* The breakpoint instruction must be the same size as the smallest\r
- instruction in the instruction set.\r
-\r
- The Matsushita mn10x00 processors have single byte instructions\r
- so we need a single byte breakpoint. Matsushita hasn't defined\r
- one, so we defined it ourselves. */\r
-\r
-const static unsigned char *\r
-mn10300_breakpoint_from_pc (CORE_ADDR *bp_addr, int *bp_size)\r
-{\r
- static char breakpoint[] = {0xff};\r
- *bp_size = 1;\r
- return breakpoint;\r
-}\r
-\r
-/* Function: skip_prologue\r
- Return the address of the first inst past the prologue of the function. */\r
-\r
-static CORE_ADDR\r
-mn10300_skip_prologue (CORE_ADDR pc)\r
-{\r
- /* FIXME: not implemented. */\r
- /* First approximation, try simply using skip_prologue_using_sal. */\r
- return skip_prologue_using_sal (pc);\r
-}\r
-\r
-/* Simple frame_unwind_cache. \r
- This finds the "extra info" for the frame. */\r
-struct trad_frame_cache *\r
-mn10300_frame_unwind_cache (struct frame_info *next_frame,\r
- void **this_prologue_cache)\r
-{\r
- struct trad_frame_cache *cache;\r
-\r
- if (*this_prologue_cache)\r
- return (*this_prologue_cache);\r
-\r
- cache = trad_frame_cache_zalloc (next_frame);\r
- trad_frame_set_id (cache, \r
- frame_id_build (gdbarch_unwind_sp (current_gdbarch,\r
- next_frame),\r
- gdbarch_unwind_pc (current_gdbarch,\r
- next_frame)));\r
-\r
- /* FIXME: The SP isn't the frame base, so this is 0th approximation. */\r
- /* FIXME: The A3 reg isn't always the frame register either, so this\r
- is 1st approximation. */\r
- trad_frame_set_this_base (cache, \r
- frame_unwind_register_signed (next_frame, \r
- E_A3_REGNUM));\r
- (*this_prologue_cache) = cache;\r
- return cache;\r
-}\r
-\r
-/* Here is a dummy implementation. */\r
-static struct frame_id\r
-mn10300_dummy_unwind_dummy_id (struct gdbarch *gdbarch,\r
- struct frame_info *next_frame)\r
-{\r
- return frame_id_build (0, 0);\r
-}\r
-\r
-/* Trad frame implementation. */\r
-static void\r
-mn10300_frame_this_id (struct frame_info *next_frame,\r
- void **this_prologue_cache,\r
- struct frame_id *this_id)\r
-{\r
- struct trad_frame_cache *cache = \r
- mn10300_frame_unwind_cache (next_frame, this_prologue_cache);\r
-\r
- trad_frame_get_id (cache, this_id);\r
-}\r
-\r
-static void\r
-mn10300_frame_prev_register (struct frame_info *next_frame,\r
- void **this_prologue_cache,\r
- int regnum, int *optimizedp,\r
- enum lval_type *lvalp, CORE_ADDR *addrp,\r
- int *realnump, void *bufferp)\r
-{\r
- struct trad_frame_cache *cache =\r
- mn10300_frame_unwind_cache (next_frame, this_prologue_cache);\r
-\r
- trad_frame_get_register (cache, next_frame, regnum, optimizedp, \r
- lvalp, addrp, realnump, bufferp);\r
- /* Or...\r
- trad_frame_get_prev_register (next_frame, cache->prev_regs, regnum, \r
- optimizedp, lvalp, addrp, realnump, bufferp);\r
- */\r
-}\r
-\r
-static const struct frame_unwind mn10300_frame_unwind = {\r
- NORMAL_FRAME,\r
- mn10300_frame_this_id, \r
- mn10300_frame_prev_register\r
-};\r
-\r
-static CORE_ADDR\r
-mn10300_frame_base_address (struct frame_info *next_frame,\r
- void **this_prologue_cache)\r
-{\r
- struct trad_frame_cache *cache = \r
- mn10300_frame_unwind_cache (next_frame, this_prologue_cache);\r
-\r
- return trad_frame_get_this_base (cache);\r
-}\r
-\r
-static const struct frame_unwind *\r
-mn10300_frame_sniffer (struct frame_info *next_frame)\r
-{\r
- return &mn10300_frame_unwind;\r
-}\r
-\r
-static const struct frame_base mn10300_frame_base = {\r
- &mn10300_frame_unwind, \r
- mn10300_frame_base_address, \r
- mn10300_frame_base_address,\r
- mn10300_frame_base_address\r
-};\r
-\r
-static CORE_ADDR\r
-mn10300_unwind_pc (struct gdbarch *gdbarch, struct frame_info *next_frame)\r
-{\r
- ULONGEST pc;\r
-\r
- frame_unwind_unsigned_register (next_frame, E_PC_REGNUM, &pc);\r
- return pc;\r
-}\r
-\r
-static CORE_ADDR\r
-mn10300_unwind_sp (struct gdbarch *gdbarch, struct frame_info *next_frame)\r
-{\r
- ULONGEST sp;\r
-\r
- frame_unwind_unsigned_register (next_frame, E_SP_REGNUM, &sp);\r
- return sp;\r
-}\r
-\r
-static void\r
-mn10300_frame_unwind_init (struct gdbarch *gdbarch)\r
-{\r
- frame_unwind_append_sniffer (gdbarch, dwarf2_frame_sniffer);\r
- frame_unwind_append_sniffer (gdbarch, mn10300_frame_sniffer);\r
- frame_base_set_default (gdbarch, &mn10300_frame_base);\r
- set_gdbarch_unwind_dummy_id (gdbarch, mn10300_dummy_unwind_dummy_id);\r
- set_gdbarch_unwind_pc (gdbarch, mn10300_unwind_pc);\r
- set_gdbarch_unwind_sp (gdbarch, mn10300_unwind_sp);\r
-}\r
-\r
-/* Dump out the mn10300 specific architecture information. */\r
-\r
-static void\r
-mn10300_dump_tdep (struct gdbarch *current_gdbarch, struct ui_file *file)\r
-{\r
- struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);\r
- fprintf_unfiltered (file, "mn10300_dump_tdep: am33_mode = %d\n",\r
- tdep->am33_mode);\r
-}\r
-\r
-static struct gdbarch *\r
-mn10300_gdbarch_init (struct gdbarch_info info,\r
- struct gdbarch_list *arches)\r
-{\r
- struct gdbarch *gdbarch;\r
- struct gdbarch_tdep *tdep;\r
-\r
- arches = gdbarch_list_lookup_by_info (arches, &info);\r
- if (arches != NULL)\r
- return arches->gdbarch;\r
-\r
- tdep = xmalloc (sizeof (struct gdbarch_tdep));\r
- gdbarch = gdbarch_alloc (&info, tdep);\r
-\r
- switch (info.bfd_arch_info->mach)\r
- {\r
- case 0:\r
- case bfd_mach_mn10300:\r
- set_gdbarch_register_name (gdbarch, mn10300_generic_register_name);\r
- tdep->am33_mode = 0;\r
- break;\r
- case bfd_mach_am33:\r
- set_gdbarch_register_name (gdbarch, am33_register_name);\r
- tdep->am33_mode = 1;\r
- break;\r
- default:\r
- internal_error (__FILE__, __LINE__,\r
- "mn10300_gdbarch_init: Unknown mn10300 variant");\r
- break;\r
- }\r
-\r
- /* Registers. */\r
- set_gdbarch_num_regs (gdbarch, E_NUM_REGS);\r
- set_gdbarch_register_type (gdbarch, mn10300_register_type);\r
- set_gdbarch_skip_prologue (gdbarch, mn10300_skip_prologue);\r
- set_gdbarch_read_pc (gdbarch, mn10300_read_pc);\r
- set_gdbarch_write_pc (gdbarch, mn10300_write_pc);\r
- set_gdbarch_pc_regnum (gdbarch, E_PC_REGNUM);\r
- set_gdbarch_sp_regnum (gdbarch, E_SP_REGNUM);\r
-\r
- /* Stack unwinding. */\r
- set_gdbarch_inner_than (gdbarch, core_addr_lessthan);\r
- /* Breakpoints. */\r
- set_gdbarch_breakpoint_from_pc (gdbarch, mn10300_breakpoint_from_pc);\r
- /* decr_pc_after_break? */\r
- /* Disassembly. */\r
- set_gdbarch_print_insn (gdbarch, print_insn_mn10300);\r
-\r
- /* Stage 2 */\r
- /* MVS Note: at least the first one is deprecated! */\r
- set_gdbarch_deprecated_use_struct_convention (gdbarch, \r
- mn10300_use_struct_convention);\r
- set_gdbarch_store_return_value (gdbarch, mn10300_store_return_value);\r
- set_gdbarch_extract_return_value (gdbarch, mn10300_extract_return_value);\r
-\r
- mn10300_frame_unwind_init (gdbarch);\r
-\r
- return gdbarch;\r
-}\r
- \r
-void\r
-_initialize_mn10300_tdep (void)\r
-{\r
- gdbarch_register (bfd_arch_mn10300, mn10300_gdbarch_init, mn10300_dump_tdep);\r
-}\r
-\r
+/* Target-dependent code for the Matsushita MN10300 for GDB, the GNU debugger.
+
+ Copyright (C) 1996-2019 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#include "defs.h"
+#include "arch-utils.h"
+#include "dis-asm.h"
+#include "gdbtypes.h"
+#include "regcache.h"
+#include "gdbcore.h" /* For write_memory_unsigned_integer. */
+#include "value.h"
+#include "frame.h"
+#include "frame-unwind.h"
+#include "frame-base.h"
+#include "symtab.h"
+#include "dwarf2-frame.h"
+#include "osabi.h"
+#include "infcall.h"
+#include "prologue-value.h"
+#include "target.h"
+
+#include "mn10300-tdep.h"
+
+
+/* The am33-2 has 64 registers. */
+#define MN10300_MAX_NUM_REGS 64
+
+/* Big enough to hold the size of the largest register in bytes. */
+#define MN10300_MAX_REGISTER_SIZE 64
+
+/* This structure holds the results of a prologue analysis. */
+struct mn10300_prologue
+{
+ /* The architecture for which we generated this prologue info. */
+ struct gdbarch *gdbarch;
+
+ /* The offset from the frame base to the stack pointer --- always
+ zero or negative.
+
+ Calling this a "size" is a bit misleading, but given that the
+ stack grows downwards, using offsets for everything keeps one
+ from going completely sign-crazy: you never change anything's
+ sign for an ADD instruction; always change the second operand's
+ sign for a SUB instruction; and everything takes care of
+ itself. */
+ int frame_size;
+
+ /* Non-zero if this function has initialized the frame pointer from
+ the stack pointer, zero otherwise. */
+ int has_frame_ptr;
+
+ /* If has_frame_ptr is non-zero, this is the offset from the frame
+ base to where the frame pointer points. This is always zero or
+ negative. */
+ int frame_ptr_offset;
+
+ /* The address of the first instruction at which the frame has been
+ set up and the arguments are where the debug info says they are
+ --- as best as we can tell. */
+ CORE_ADDR prologue_end;
+
+ /* reg_offset[R] is the offset from the CFA at which register R is
+ saved, or 1 if register R has not been saved. (Real values are
+ always zero or negative.) */
+ int reg_offset[MN10300_MAX_NUM_REGS];
+};
+
+
+/* Compute the alignment required by a type. */
+
+static int
+mn10300_type_align (struct type *type)
+{
+ int i, align = 1;
+
+ switch (TYPE_CODE (type))
+ {
+ case TYPE_CODE_INT:
+ case TYPE_CODE_ENUM:
+ case TYPE_CODE_SET:
+ case TYPE_CODE_RANGE:
+ case TYPE_CODE_CHAR:
+ case TYPE_CODE_BOOL:
+ case TYPE_CODE_FLT:
+ case TYPE_CODE_PTR:
+ case TYPE_CODE_REF:
+ case TYPE_CODE_RVALUE_REF:
+ return TYPE_LENGTH (type);
+
+ case TYPE_CODE_COMPLEX:
+ return TYPE_LENGTH (type) / 2;
+
+ case TYPE_CODE_STRUCT:
+ case TYPE_CODE_UNION:
+ for (i = 0; i < TYPE_NFIELDS (type); i++)
+ {
+ int falign = mn10300_type_align (TYPE_FIELD_TYPE (type, i));
+ while (align < falign)
+ align <<= 1;
+ }
+ return align;
+
+ case TYPE_CODE_ARRAY:
+ /* HACK! Structures containing arrays, even small ones, are not
+ eligible for returning in registers. */
+ return 256;
+
+ case TYPE_CODE_TYPEDEF:
+ return mn10300_type_align (check_typedef (type));
+
+ default:
+ internal_error (__FILE__, __LINE__, _("bad switch"));
+ }
+}
+
+/* Should call_function allocate stack space for a struct return? */
+static int
+mn10300_use_struct_convention (struct type *type)
+{
+ /* Structures bigger than a pair of words can't be returned in
+ registers. */
+ if (TYPE_LENGTH (type) > 8)
+ return 1;
+
+ switch (TYPE_CODE (type))
+ {
+ case TYPE_CODE_STRUCT:
+ case TYPE_CODE_UNION:
+ /* Structures with a single field are handled as the field
+ itself. */
+ if (TYPE_NFIELDS (type) == 1)
+ return mn10300_use_struct_convention (TYPE_FIELD_TYPE (type, 0));
+
+ /* Structures with word or double-word size are passed in memory, as
+ long as they require at least word alignment. */
+ if (mn10300_type_align (type) >= 4)
+ return 0;
+
+ return 1;
+
+ /* Arrays are addressable, so they're never returned in
+ registers. This condition can only hold when the array is
+ the only field of a struct or union. */
+ case TYPE_CODE_ARRAY:
+ return 1;
+
+ case TYPE_CODE_TYPEDEF:
+ return mn10300_use_struct_convention (check_typedef (type));
+
+ default:
+ return 0;
+ }
+}
+
+static void
+mn10300_store_return_value (struct gdbarch *gdbarch, struct type *type,
+ struct regcache *regcache, const gdb_byte *valbuf)
+{
+ int len = TYPE_LENGTH (type);
+ int reg, regsz;
+
+ if (TYPE_CODE (type) == TYPE_CODE_PTR)
+ reg = 4;
+ else
+ reg = 0;
+
+ regsz = register_size (gdbarch, reg);
+
+ if (len <= regsz)
+ regcache->raw_write_part (reg, 0, len, valbuf);
+ else if (len <= 2 * regsz)
+ {
+ regcache->raw_write (reg, valbuf);
+ gdb_assert (regsz == register_size (gdbarch, reg + 1));
+ regcache->raw_write_part (reg + 1, 0, len - regsz, valbuf + regsz);
+ }
+ else
+ internal_error (__FILE__, __LINE__,
+ _("Cannot store return value %d bytes long."), len);
+}
+
+static void
+mn10300_extract_return_value (struct gdbarch *gdbarch, struct type *type,
+ struct regcache *regcache, void *valbuf)
+{
+ gdb_byte buf[MN10300_MAX_REGISTER_SIZE];
+ int len = TYPE_LENGTH (type);
+ int reg, regsz;
+
+ if (TYPE_CODE (type) == TYPE_CODE_PTR)
+ reg = 4;
+ else
+ reg = 0;
+
+ regsz = register_size (gdbarch, reg);
+ gdb_assert (regsz <= MN10300_MAX_REGISTER_SIZE);
+ if (len <= regsz)
+ {
+ regcache->raw_read (reg, buf);
+ memcpy (valbuf, buf, len);
+ }
+ else if (len <= 2 * regsz)
+ {
+ regcache->raw_read (reg, buf);
+ memcpy (valbuf, buf, regsz);
+ gdb_assert (regsz == register_size (gdbarch, reg + 1));
+ regcache->raw_read (reg + 1, buf);
+ memcpy ((char *) valbuf + regsz, buf, len - regsz);
+ }
+ else
+ internal_error (__FILE__, __LINE__,
+ _("Cannot extract return value %d bytes long."), len);
+}
+
+/* Determine, for architecture GDBARCH, how a return value of TYPE
+ should be returned. If it is supposed to be returned in registers,
+ and READBUF is non-zero, read the appropriate value from REGCACHE,
+ and copy it into READBUF. If WRITEBUF is non-zero, write the value
+ from WRITEBUF into REGCACHE. */
+
+static enum return_value_convention
+mn10300_return_value (struct gdbarch *gdbarch, struct value *function,
+ struct type *type, struct regcache *regcache,
+ gdb_byte *readbuf, const gdb_byte *writebuf)
+{
+ if (mn10300_use_struct_convention (type))
+ return RETURN_VALUE_STRUCT_CONVENTION;
+
+ if (readbuf)
+ mn10300_extract_return_value (gdbarch, type, regcache, readbuf);
+ if (writebuf)
+ mn10300_store_return_value (gdbarch, type, regcache, writebuf);
+
+ return RETURN_VALUE_REGISTER_CONVENTION;
+}
+
+static const char *
+register_name (int reg, const char **regs, long sizeof_regs)
+{
+ if (reg < 0 || reg >= sizeof_regs / sizeof (regs[0]))
+ return NULL;
+ else
+ return regs[reg];
+}
+
+static const char *
+mn10300_generic_register_name (struct gdbarch *gdbarch, int reg)
+{
+ static const char *regs[] =
+ { "d0", "d1", "d2", "d3", "a0", "a1", "a2", "a3",
+ "sp", "pc", "mdr", "psw", "lir", "lar", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "fp"
+ };
+ return register_name (reg, regs, sizeof regs);
+}
+
+
+static const char *
+am33_register_name (struct gdbarch *gdbarch, int reg)
+{
+ static const char *regs[] =
+ { "d0", "d1", "d2", "d3", "a0", "a1", "a2", "a3",
+ "sp", "pc", "mdr", "psw", "lir", "lar", "",
+ "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
+ "ssp", "msp", "usp", "mcrh", "mcrl", "mcvf", "", "", ""
+ };
+ return register_name (reg, regs, sizeof regs);
+}
+
+static const char *
+am33_2_register_name (struct gdbarch *gdbarch, int reg)
+{
+ static const char *regs[] =
+ {
+ "d0", "d1", "d2", "d3", "a0", "a1", "a2", "a3",
+ "sp", "pc", "mdr", "psw", "lir", "lar", "mdrq", "r0",
+ "r1", "r2", "r3", "r4", "r5", "r6", "r7", "ssp",
+ "msp", "usp", "mcrh", "mcrl", "mcvf", "fpcr", "", "",
+ "fs0", "fs1", "fs2", "fs3", "fs4", "fs5", "fs6", "fs7",
+ "fs8", "fs9", "fs10", "fs11", "fs12", "fs13", "fs14", "fs15",
+ "fs16", "fs17", "fs18", "fs19", "fs20", "fs21", "fs22", "fs23",
+ "fs24", "fs25", "fs26", "fs27", "fs28", "fs29", "fs30", "fs31"
+ };
+ return register_name (reg, regs, sizeof regs);
+}
+
+static struct type *
+mn10300_register_type (struct gdbarch *gdbarch, int reg)
+{
+ return builtin_type (gdbarch)->builtin_int;
+}
+
+/* The breakpoint instruction must be the same size as the smallest
+ instruction in the instruction set.
+
+ The Matsushita mn10x00 processors have single byte instructions
+ so we need a single byte breakpoint. Matsushita hasn't defined
+ one, so we defined it ourselves. */
+constexpr gdb_byte mn10300_break_insn[] = {0xff};
+
+typedef BP_MANIPULATION (mn10300_break_insn) mn10300_breakpoint;
+
+/* Model the semantics of pushing a register onto the stack. This
+ is a helper function for mn10300_analyze_prologue, below. */
+static void
+push_reg (pv_t *regs, struct pv_area *stack, int regnum)
+{
+ regs[E_SP_REGNUM] = pv_add_constant (regs[E_SP_REGNUM], -4);
+ stack->store (regs[E_SP_REGNUM], 4, regs[regnum]);
+}
+
+/* Translate an "r" register number extracted from an instruction encoding
+ into a GDB register number. Adapted from a simulator function
+ of the same name; see am33.igen. */
+static int
+translate_rreg (int rreg)
+{
+ /* The higher register numbers actually correspond to the
+ basic machine's address and data registers. */
+ if (rreg > 7 && rreg < 12)
+ return E_A0_REGNUM + rreg - 8;
+ else if (rreg > 11 && rreg < 16)
+ return E_D0_REGNUM + rreg - 12;
+ else
+ return E_E0_REGNUM + rreg;
+}
+
+/* Find saved registers in a 'struct pv_area'; we pass this to pv_area::scan.
+
+ If VALUE is a saved register, ADDR says it was saved at a constant
+ offset from the frame base, and SIZE indicates that the whole
+ register was saved, record its offset in RESULT_UNTYPED. */
+static void
+check_for_saved (void *result_untyped, pv_t addr, CORE_ADDR size, pv_t value)
+{
+ struct mn10300_prologue *result = (struct mn10300_prologue *) result_untyped;
+
+ if (value.kind == pvk_register
+ && value.k == 0
+ && pv_is_register (addr, E_SP_REGNUM)
+ && size == register_size (result->gdbarch, value.reg))
+ result->reg_offset[value.reg] = addr.k;
+}
+
+/* Analyze the prologue to determine where registers are saved,
+ the end of the prologue, etc. The result of this analysis is
+ returned in RESULT. See struct mn10300_prologue above for more
+ information. */
+static void
+mn10300_analyze_prologue (struct gdbarch *gdbarch,
+ CORE_ADDR start_pc, CORE_ADDR limit_pc,
+ struct mn10300_prologue *result)
+{
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+ CORE_ADDR pc;
+ int rn;
+ pv_t regs[MN10300_MAX_NUM_REGS];
+ CORE_ADDR after_last_frame_setup_insn = start_pc;
+ int am33_mode = AM33_MODE (gdbarch);
+
+ memset (result, 0, sizeof (*result));
+ result->gdbarch = gdbarch;
+
+ for (rn = 0; rn < MN10300_MAX_NUM_REGS; rn++)
+ {
+ regs[rn] = pv_register (rn, 0);
+ result->reg_offset[rn] = 1;
+ }
+ pv_area stack (E_SP_REGNUM, gdbarch_addr_bit (gdbarch));
+
+ /* The typical call instruction will have saved the return address on the
+ stack. Space for the return address has already been preallocated in
+ the caller's frame. It's possible, such as when using -mrelax with gcc
+ that other registers were saved as well. If this happens, we really
+ have no chance of deciphering the frame. DWARF info can save the day
+ when this happens. */
+ stack.store (regs[E_SP_REGNUM], 4, regs[E_PC_REGNUM]);
+
+ pc = start_pc;
+ while (pc < limit_pc)
+ {
+ int status;
+ gdb_byte instr[2];
+
+ /* Instructions can be as small as one byte; however, we usually
+ need at least two bytes to do the decoding, so fetch that many
+ to begin with. */
+ status = target_read_memory (pc, instr, 2);
+ if (status != 0)
+ break;
+
+ /* movm [regs], sp */
+ if (instr[0] == 0xcf)
+ {
+ gdb_byte save_mask;
+
+ save_mask = instr[1];
+
+ if ((save_mask & movm_exreg0_bit) && am33_mode)
+ {
+ push_reg (regs, &stack, E_E2_REGNUM);
+ push_reg (regs, &stack, E_E3_REGNUM);
+ }
+ if ((save_mask & movm_exreg1_bit) && am33_mode)
+ {
+ push_reg (regs, &stack, E_E4_REGNUM);
+ push_reg (regs, &stack, E_E5_REGNUM);
+ push_reg (regs, &stack, E_E6_REGNUM);
+ push_reg (regs, &stack, E_E7_REGNUM);
+ }
+ if ((save_mask & movm_exother_bit) && am33_mode)
+ {
+ push_reg (regs, &stack, E_E0_REGNUM);
+ push_reg (regs, &stack, E_E1_REGNUM);
+ push_reg (regs, &stack, E_MDRQ_REGNUM);
+ push_reg (regs, &stack, E_MCRH_REGNUM);
+ push_reg (regs, &stack, E_MCRL_REGNUM);
+ push_reg (regs, &stack, E_MCVF_REGNUM);
+ }
+ if (save_mask & movm_d2_bit)
+ push_reg (regs, &stack, E_D2_REGNUM);
+ if (save_mask & movm_d3_bit)
+ push_reg (regs, &stack, E_D3_REGNUM);
+ if (save_mask & movm_a2_bit)
+ push_reg (regs, &stack, E_A2_REGNUM);
+ if (save_mask & movm_a3_bit)
+ push_reg (regs, &stack, E_A3_REGNUM);
+ if (save_mask & movm_other_bit)
+ {
+ push_reg (regs, &stack, E_D0_REGNUM);
+ push_reg (regs, &stack, E_D1_REGNUM);
+ push_reg (regs, &stack, E_A0_REGNUM);
+ push_reg (regs, &stack, E_A1_REGNUM);
+ push_reg (regs, &stack, E_MDR_REGNUM);
+ push_reg (regs, &stack, E_LIR_REGNUM);
+ push_reg (regs, &stack, E_LAR_REGNUM);
+ /* The `other' bit leaves a blank area of four bytes at
+ the beginning of its block of saved registers, making
+ it 32 bytes long in total. */
+ regs[E_SP_REGNUM] = pv_add_constant (regs[E_SP_REGNUM], -4);
+ }
+
+ pc += 2;
+ after_last_frame_setup_insn = pc;
+ }
+ /* mov sp, aN */
+ else if ((instr[0] & 0xfc) == 0x3c)
+ {
+ int aN = instr[0] & 0x03;
+
+ regs[E_A0_REGNUM + aN] = regs[E_SP_REGNUM];
+
+ pc += 1;
+ if (aN == 3)
+ after_last_frame_setup_insn = pc;
+ }
+ /* mov aM, aN */
+ else if ((instr[0] & 0xf0) == 0x90
+ && (instr[0] & 0x03) != ((instr[0] & 0x0c) >> 2))
+ {
+ int aN = instr[0] & 0x03;
+ int aM = (instr[0] & 0x0c) >> 2;
+
+ regs[E_A0_REGNUM + aN] = regs[E_A0_REGNUM + aM];
+
+ pc += 1;
+ }
+ /* mov dM, dN */
+ else if ((instr[0] & 0xf0) == 0x80
+ && (instr[0] & 0x03) != ((instr[0] & 0x0c) >> 2))
+ {
+ int dN = instr[0] & 0x03;
+ int dM = (instr[0] & 0x0c) >> 2;
+
+ regs[E_D0_REGNUM + dN] = regs[E_D0_REGNUM + dM];
+
+ pc += 1;
+ }
+ /* mov aM, dN */
+ else if (instr[0] == 0xf1 && (instr[1] & 0xf0) == 0xd0)
+ {
+ int dN = instr[1] & 0x03;
+ int aM = (instr[1] & 0x0c) >> 2;
+
+ regs[E_D0_REGNUM + dN] = regs[E_A0_REGNUM + aM];
+
+ pc += 2;
+ }
+ /* mov dM, aN */
+ else if (instr[0] == 0xf1 && (instr[1] & 0xf0) == 0xe0)
+ {
+ int aN = instr[1] & 0x03;
+ int dM = (instr[1] & 0x0c) >> 2;
+
+ regs[E_A0_REGNUM + aN] = regs[E_D0_REGNUM + dM];
+
+ pc += 2;
+ }
+ /* add imm8, SP */
+ else if (instr[0] == 0xf8 && instr[1] == 0xfe)
+ {
+ gdb_byte buf[1];
+ LONGEST imm8;
+
+
+ status = target_read_memory (pc + 2, buf, 1);
+ if (status != 0)
+ break;
+
+ imm8 = extract_signed_integer (buf, 1, byte_order);
+ regs[E_SP_REGNUM] = pv_add_constant (regs[E_SP_REGNUM], imm8);
+
+ pc += 3;
+ /* Stack pointer adjustments are frame related. */
+ after_last_frame_setup_insn = pc;
+ }
+ /* add imm16, SP */
+ else if (instr[0] == 0xfa && instr[1] == 0xfe)
+ {
+ gdb_byte buf[2];
+ LONGEST imm16;
+
+ status = target_read_memory (pc + 2, buf, 2);
+ if (status != 0)
+ break;
+
+ imm16 = extract_signed_integer (buf, 2, byte_order);
+ regs[E_SP_REGNUM] = pv_add_constant (regs[E_SP_REGNUM], imm16);
+
+ pc += 4;
+ /* Stack pointer adjustments are frame related. */
+ after_last_frame_setup_insn = pc;
+ }
+ /* add imm32, SP */
+ else if (instr[0] == 0xfc && instr[1] == 0xfe)
+ {
+ gdb_byte buf[4];
+ LONGEST imm32;
+
+ status = target_read_memory (pc + 2, buf, 4);
+ if (status != 0)
+ break;
+
+
+ imm32 = extract_signed_integer (buf, 4, byte_order);
+ regs[E_SP_REGNUM] = pv_add_constant (regs[E_SP_REGNUM], imm32);
+
+ pc += 6;
+ /* Stack pointer adjustments are frame related. */
+ after_last_frame_setup_insn = pc;
+ }
+ /* add imm8, aN */
+ else if ((instr[0] & 0xfc) == 0x20)
+ {
+ int aN;
+ LONGEST imm8;
+
+ aN = instr[0] & 0x03;
+ imm8 = extract_signed_integer (&instr[1], 1, byte_order);
+
+ regs[E_A0_REGNUM + aN] = pv_add_constant (regs[E_A0_REGNUM + aN],
+ imm8);
+
+ pc += 2;
+ }
+ /* add imm16, aN */
+ else if (instr[0] == 0xfa && (instr[1] & 0xfc) == 0xd0)
+ {
+ int aN;
+ LONGEST imm16;
+ gdb_byte buf[2];
+
+ aN = instr[1] & 0x03;
+
+ status = target_read_memory (pc + 2, buf, 2);
+ if (status != 0)
+ break;
+
+
+ imm16 = extract_signed_integer (buf, 2, byte_order);
+
+ regs[E_A0_REGNUM + aN] = pv_add_constant (regs[E_A0_REGNUM + aN],
+ imm16);
+
+ pc += 4;
+ }
+ /* add imm32, aN */
+ else if (instr[0] == 0xfc && (instr[1] & 0xfc) == 0xd0)
+ {
+ int aN;
+ LONGEST imm32;
+ gdb_byte buf[4];
+
+ aN = instr[1] & 0x03;
+
+ status = target_read_memory (pc + 2, buf, 4);
+ if (status != 0)
+ break;
+
+ imm32 = extract_signed_integer (buf, 2, byte_order);
+
+ regs[E_A0_REGNUM + aN] = pv_add_constant (regs[E_A0_REGNUM + aN],
+ imm32);
+ pc += 6;
+ }
+ /* fmov fsM, (rN) */
+ else if (instr[0] == 0xf9 && (instr[1] & 0xfd) == 0x30)
+ {
+ int fsM, sM, Y, rN;
+ gdb_byte buf[1];
+
+ Y = (instr[1] & 0x02) >> 1;
+
+ status = target_read_memory (pc + 2, buf, 1);
+ if (status != 0)
+ break;
+
+ sM = (buf[0] & 0xf0) >> 4;
+ rN = buf[0] & 0x0f;
+ fsM = (Y << 4) | sM;
+
+ stack.store (regs[translate_rreg (rN)], 4,
+ regs[E_FS0_REGNUM + fsM]);
+
+ pc += 3;
+ }
+ /* fmov fsM, (sp) */
+ else if (instr[0] == 0xf9 && (instr[1] & 0xfd) == 0x34)
+ {
+ int fsM, sM, Y;
+ gdb_byte buf[1];
+
+ Y = (instr[1] & 0x02) >> 1;
+
+ status = target_read_memory (pc + 2, buf, 1);
+ if (status != 0)
+ break;
+
+ sM = (buf[0] & 0xf0) >> 4;
+ fsM = (Y << 4) | sM;
+
+ stack.store (regs[E_SP_REGNUM], 4,
+ regs[E_FS0_REGNUM + fsM]);
+
+ pc += 3;
+ }
+ /* fmov fsM, (rN, rI) */
+ else if (instr[0] == 0xfb && instr[1] == 0x37)
+ {
+ int fsM, sM, Z, rN, rI;
+ gdb_byte buf[2];
+
+
+ status = target_read_memory (pc + 2, buf, 2);
+ if (status != 0)
+ break;
+
+ rI = (buf[0] & 0xf0) >> 4;
+ rN = buf[0] & 0x0f;
+ sM = (buf[1] & 0xf0) >> 4;
+ Z = (buf[1] & 0x02) >> 1;
+ fsM = (Z << 4) | sM;
+
+ stack.store (pv_add (regs[translate_rreg (rN)],
+ regs[translate_rreg (rI)]),
+ 4, regs[E_FS0_REGNUM + fsM]);
+
+ pc += 4;
+ }
+ /* fmov fsM, (d8, rN) */
+ else if (instr[0] == 0xfb && (instr[1] & 0xfd) == 0x30)
+ {
+ int fsM, sM, Y, rN;
+ LONGEST d8;
+ gdb_byte buf[2];
+
+ Y = (instr[1] & 0x02) >> 1;
+
+ status = target_read_memory (pc + 2, buf, 2);
+ if (status != 0)
+ break;
+
+ sM = (buf[0] & 0xf0) >> 4;
+ rN = buf[0] & 0x0f;
+ fsM = (Y << 4) | sM;
+ d8 = extract_signed_integer (&buf[1], 1, byte_order);
+
+ stack.store (pv_add_constant (regs[translate_rreg (rN)], d8),
+ 4, regs[E_FS0_REGNUM + fsM]);
+
+ pc += 4;
+ }
+ /* fmov fsM, (d24, rN) */
+ else if (instr[0] == 0xfd && (instr[1] & 0xfd) == 0x30)
+ {
+ int fsM, sM, Y, rN;
+ LONGEST d24;
+ gdb_byte buf[4];
+
+ Y = (instr[1] & 0x02) >> 1;
+
+ status = target_read_memory (pc + 2, buf, 4);
+ if (status != 0)
+ break;
+
+ sM = (buf[0] & 0xf0) >> 4;
+ rN = buf[0] & 0x0f;
+ fsM = (Y << 4) | sM;
+ d24 = extract_signed_integer (&buf[1], 3, byte_order);
+
+ stack.store (pv_add_constant (regs[translate_rreg (rN)], d24),
+ 4, regs[E_FS0_REGNUM + fsM]);
+
+ pc += 6;
+ }
+ /* fmov fsM, (d32, rN) */
+ else if (instr[0] == 0xfe && (instr[1] & 0xfd) == 0x30)
+ {
+ int fsM, sM, Y, rN;
+ LONGEST d32;
+ gdb_byte buf[5];
+
+ Y = (instr[1] & 0x02) >> 1;
+
+ status = target_read_memory (pc + 2, buf, 5);
+ if (status != 0)
+ break;
+
+ sM = (buf[0] & 0xf0) >> 4;
+ rN = buf[0] & 0x0f;
+ fsM = (Y << 4) | sM;
+ d32 = extract_signed_integer (&buf[1], 4, byte_order);
+
+ stack.store (pv_add_constant (regs[translate_rreg (rN)], d32),
+ 4, regs[E_FS0_REGNUM + fsM]);
+
+ pc += 7;
+ }
+ /* fmov fsM, (d8, SP) */
+ else if (instr[0] == 0xfb && (instr[1] & 0xfd) == 0x34)
+ {
+ int fsM, sM, Y;
+ LONGEST d8;
+ gdb_byte buf[2];
+
+ Y = (instr[1] & 0x02) >> 1;
+
+ status = target_read_memory (pc + 2, buf, 2);
+ if (status != 0)
+ break;
+
+ sM = (buf[0] & 0xf0) >> 4;
+ fsM = (Y << 4) | sM;
+ d8 = extract_signed_integer (&buf[1], 1, byte_order);
+
+ stack.store (pv_add_constant (regs[E_SP_REGNUM], d8),
+ 4, regs[E_FS0_REGNUM + fsM]);
+
+ pc += 4;
+ }
+ /* fmov fsM, (d24, SP) */
+ else if (instr[0] == 0xfd && (instr[1] & 0xfd) == 0x34)
+ {
+ int fsM, sM, Y;
+ LONGEST d24;
+ gdb_byte buf[4];
+
+ Y = (instr[1] & 0x02) >> 1;
+
+ status = target_read_memory (pc + 2, buf, 4);
+ if (status != 0)
+ break;
+
+ sM = (buf[0] & 0xf0) >> 4;
+ fsM = (Y << 4) | sM;
+ d24 = extract_signed_integer (&buf[1], 3, byte_order);
+
+ stack.store (pv_add_constant (regs[E_SP_REGNUM], d24),
+ 4, regs[E_FS0_REGNUM + fsM]);
+
+ pc += 6;
+ }
+ /* fmov fsM, (d32, SP) */
+ else if (instr[0] == 0xfe && (instr[1] & 0xfd) == 0x34)
+ {
+ int fsM, sM, Y;
+ LONGEST d32;
+ gdb_byte buf[5];
+
+ Y = (instr[1] & 0x02) >> 1;
+
+ status = target_read_memory (pc + 2, buf, 5);
+ if (status != 0)
+ break;
+
+ sM = (buf[0] & 0xf0) >> 4;
+ fsM = (Y << 4) | sM;
+ d32 = extract_signed_integer (&buf[1], 4, byte_order);
+
+ stack.store (pv_add_constant (regs[E_SP_REGNUM], d32),
+ 4, regs[E_FS0_REGNUM + fsM]);
+
+ pc += 7;
+ }
+ /* fmov fsM, (rN+) */
+ else if (instr[0] == 0xf9 && (instr[1] & 0xfd) == 0x31)
+ {
+ int fsM, sM, Y, rN, rN_regnum;
+ gdb_byte buf[1];
+
+ Y = (instr[1] & 0x02) >> 1;
+
+ status = target_read_memory (pc + 2, buf, 1);
+ if (status != 0)
+ break;
+
+ sM = (buf[0] & 0xf0) >> 4;
+ rN = buf[0] & 0x0f;
+ fsM = (Y << 4) | sM;
+
+ rN_regnum = translate_rreg (rN);
+
+ stack.store (regs[rN_regnum], 4,
+ regs[E_FS0_REGNUM + fsM]);
+ regs[rN_regnum] = pv_add_constant (regs[rN_regnum], 4);
+
+ pc += 3;
+ }
+ /* fmov fsM, (rN+, imm8) */
+ else if (instr[0] == 0xfb && (instr[1] & 0xfd) == 0x31)
+ {
+ int fsM, sM, Y, rN, rN_regnum;
+ LONGEST imm8;
+ gdb_byte buf[2];
+
+ Y = (instr[1] & 0x02) >> 1;
+
+ status = target_read_memory (pc + 2, buf, 2);
+ if (status != 0)
+ break;
+
+ sM = (buf[0] & 0xf0) >> 4;
+ rN = buf[0] & 0x0f;
+ fsM = (Y << 4) | sM;
+ imm8 = extract_signed_integer (&buf[1], 1, byte_order);
+
+ rN_regnum = translate_rreg (rN);
+
+ stack.store (regs[rN_regnum], 4, regs[E_FS0_REGNUM + fsM]);
+ regs[rN_regnum] = pv_add_constant (regs[rN_regnum], imm8);
+
+ pc += 4;
+ }
+ /* fmov fsM, (rN+, imm24) */
+ else if (instr[0] == 0xfd && (instr[1] & 0xfd) == 0x31)
+ {
+ int fsM, sM, Y, rN, rN_regnum;
+ LONGEST imm24;
+ gdb_byte buf[4];
+
+ Y = (instr[1] & 0x02) >> 1;
+
+ status = target_read_memory (pc + 2, buf, 4);
+ if (status != 0)
+ break;
+
+ sM = (buf[0] & 0xf0) >> 4;
+ rN = buf[0] & 0x0f;
+ fsM = (Y << 4) | sM;
+ imm24 = extract_signed_integer (&buf[1], 3, byte_order);
+
+ rN_regnum = translate_rreg (rN);
+
+ stack.store (regs[rN_regnum], 4, regs[E_FS0_REGNUM + fsM]);
+ regs[rN_regnum] = pv_add_constant (regs[rN_regnum], imm24);
+
+ pc += 6;
+ }
+ /* fmov fsM, (rN+, imm32) */
+ else if (instr[0] == 0xfe && (instr[1] & 0xfd) == 0x31)
+ {
+ int fsM, sM, Y, rN, rN_regnum;
+ LONGEST imm32;
+ gdb_byte buf[5];
+
+ Y = (instr[1] & 0x02) >> 1;
+
+ status = target_read_memory (pc + 2, buf, 5);
+ if (status != 0)
+ break;
+
+ sM = (buf[0] & 0xf0) >> 4;
+ rN = buf[0] & 0x0f;
+ fsM = (Y << 4) | sM;
+ imm32 = extract_signed_integer (&buf[1], 4, byte_order);
+
+ rN_regnum = translate_rreg (rN);
+
+ stack.store (regs[rN_regnum], 4, regs[E_FS0_REGNUM + fsM]);
+ regs[rN_regnum] = pv_add_constant (regs[rN_regnum], imm32);
+
+ pc += 7;
+ }
+ /* mov imm8, aN */
+ else if ((instr[0] & 0xf0) == 0x90)
+ {
+ int aN = instr[0] & 0x03;
+ LONGEST imm8;
+
+ imm8 = extract_signed_integer (&instr[1], 1, byte_order);
+
+ regs[E_A0_REGNUM + aN] = pv_constant (imm8);
+ pc += 2;
+ }
+ /* mov imm16, aN */
+ else if ((instr[0] & 0xfc) == 0x24)
+ {
+ int aN = instr[0] & 0x03;
+ gdb_byte buf[2];
+ LONGEST imm16;
+
+ status = target_read_memory (pc + 1, buf, 2);
+ if (status != 0)
+ break;
+
+ imm16 = extract_signed_integer (buf, 2, byte_order);
+ regs[E_A0_REGNUM + aN] = pv_constant (imm16);
+ pc += 3;
+ }
+ /* mov imm32, aN */
+ else if (instr[0] == 0xfc && ((instr[1] & 0xfc) == 0xdc))
+ {
+ int aN = instr[1] & 0x03;
+ gdb_byte buf[4];
+ LONGEST imm32;
+
+ status = target_read_memory (pc + 2, buf, 4);
+ if (status != 0)
+ break;
+
+ imm32 = extract_signed_integer (buf, 4, byte_order);
+ regs[E_A0_REGNUM + aN] = pv_constant (imm32);
+ pc += 6;
+ }
+ /* mov imm8, dN */
+ else if ((instr[0] & 0xf0) == 0x80)
+ {
+ int dN = instr[0] & 0x03;
+ LONGEST imm8;
+
+ imm8 = extract_signed_integer (&instr[1], 1, byte_order);
+
+ regs[E_D0_REGNUM + dN] = pv_constant (imm8);
+ pc += 2;
+ }
+ /* mov imm16, dN */
+ else if ((instr[0] & 0xfc) == 0x2c)
+ {
+ int dN = instr[0] & 0x03;
+ gdb_byte buf[2];
+ LONGEST imm16;
+
+ status = target_read_memory (pc + 1, buf, 2);
+ if (status != 0)
+ break;
+
+ imm16 = extract_signed_integer (buf, 2, byte_order);
+ regs[E_D0_REGNUM + dN] = pv_constant (imm16);
+ pc += 3;
+ }
+ /* mov imm32, dN */
+ else if (instr[0] == 0xfc && ((instr[1] & 0xfc) == 0xcc))
+ {
+ int dN = instr[1] & 0x03;
+ gdb_byte buf[4];
+ LONGEST imm32;
+
+ status = target_read_memory (pc + 2, buf, 4);
+ if (status != 0)
+ break;
+
+ imm32 = extract_signed_integer (buf, 4, byte_order);
+ regs[E_D0_REGNUM + dN] = pv_constant (imm32);
+ pc += 6;
+ }
+ else
+ {
+ /* We've hit some instruction that we don't recognize. Hopefully,
+ we have enough to do prologue analysis. */
+ break;
+ }
+ }
+
+ /* Is the frame size (offset, really) a known constant? */
+ if (pv_is_register (regs[E_SP_REGNUM], E_SP_REGNUM))
+ result->frame_size = regs[E_SP_REGNUM].k;
+
+ /* Was the frame pointer initialized? */
+ if (pv_is_register (regs[E_A3_REGNUM], E_SP_REGNUM))
+ {
+ result->has_frame_ptr = 1;
+ result->frame_ptr_offset = regs[E_A3_REGNUM].k;
+ }
+
+ /* Record where all the registers were saved. */
+ stack.scan (check_for_saved, (void *) result);
+
+ result->prologue_end = after_last_frame_setup_insn;
+}
+
+/* Function: skip_prologue
+ Return the address of the first inst past the prologue of the function. */
+
+static CORE_ADDR
+mn10300_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR pc)
+{
+ const char *name;
+ CORE_ADDR func_addr, func_end;
+ struct mn10300_prologue p;
+
+ /* Try to find the extent of the function that contains PC. */
+ if (!find_pc_partial_function (pc, &name, &func_addr, &func_end))
+ return pc;
+
+ mn10300_analyze_prologue (gdbarch, pc, func_end, &p);
+ return p.prologue_end;
+}
+
+/* Wrapper for mn10300_analyze_prologue: find the function start;
+ use the current frame PC as the limit, then
+ invoke mn10300_analyze_prologue and return its result. */
+static struct mn10300_prologue *
+mn10300_analyze_frame_prologue (struct frame_info *this_frame,
+ void **this_prologue_cache)
+{
+ if (!*this_prologue_cache)
+ {
+ CORE_ADDR func_start, stop_addr;
+
+ *this_prologue_cache = FRAME_OBSTACK_ZALLOC (struct mn10300_prologue);
+
+ func_start = get_frame_func (this_frame);
+ stop_addr = get_frame_pc (this_frame);
+
+ /* If we couldn't find any function containing the PC, then
+ just initialize the prologue cache, but don't do anything. */
+ if (!func_start)
+ stop_addr = func_start;
+
+ mn10300_analyze_prologue (get_frame_arch (this_frame),
+ func_start, stop_addr,
+ ((struct mn10300_prologue *)
+ *this_prologue_cache));
+ }
+
+ return (struct mn10300_prologue *) *this_prologue_cache;
+}
+
+/* Given the next frame and a prologue cache, return this frame's
+ base. */
+static CORE_ADDR
+mn10300_frame_base (struct frame_info *this_frame, void **this_prologue_cache)
+{
+ struct mn10300_prologue *p
+ = mn10300_analyze_frame_prologue (this_frame, this_prologue_cache);
+
+ /* In functions that use alloca, the distance between the stack
+ pointer and the frame base varies dynamically, so we can't use
+ the SP plus static information like prologue analysis to find the
+ frame base. However, such functions must have a frame pointer,
+ to be able to restore the SP on exit. So whenever we do have a
+ frame pointer, use that to find the base. */
+ if (p->has_frame_ptr)
+ {
+ CORE_ADDR fp = get_frame_register_unsigned (this_frame, E_A3_REGNUM);
+ return fp - p->frame_ptr_offset;
+ }
+ else
+ {
+ CORE_ADDR sp = get_frame_register_unsigned (this_frame, E_SP_REGNUM);
+ return sp - p->frame_size;
+ }
+}
+
+static void
+mn10300_frame_this_id (struct frame_info *this_frame,
+ void **this_prologue_cache,
+ struct frame_id *this_id)
+{
+ *this_id = frame_id_build (mn10300_frame_base (this_frame,
+ this_prologue_cache),
+ get_frame_func (this_frame));
+
+}
+
+static struct value *
+mn10300_frame_prev_register (struct frame_info *this_frame,
+ void **this_prologue_cache, int regnum)
+{
+ struct mn10300_prologue *p
+ = mn10300_analyze_frame_prologue (this_frame, this_prologue_cache);
+ CORE_ADDR frame_base = mn10300_frame_base (this_frame, this_prologue_cache);
+
+ if (regnum == E_SP_REGNUM)
+ return frame_unwind_got_constant (this_frame, regnum, frame_base);
+
+ /* If prologue analysis says we saved this register somewhere,
+ return a description of the stack slot holding it. */
+ if (p->reg_offset[regnum] != 1)
+ return frame_unwind_got_memory (this_frame, regnum,
+ frame_base + p->reg_offset[regnum]);
+
+ /* Otherwise, presume we haven't changed the value of this
+ register, and get it from the next frame. */
+ return frame_unwind_got_register (this_frame, regnum, regnum);
+}
+
+static const struct frame_unwind mn10300_frame_unwind = {
+ NORMAL_FRAME,
+ default_frame_unwind_stop_reason,
+ mn10300_frame_this_id,
+ mn10300_frame_prev_register,
+ NULL,
+ default_frame_sniffer
+};
+
+static void
+mn10300_frame_unwind_init (struct gdbarch *gdbarch)
+{
+ dwarf2_append_unwinders (gdbarch);
+ frame_unwind_append_unwinder (gdbarch, &mn10300_frame_unwind);
+}
+
+/* Function: push_dummy_call
+ *
+ * Set up machine state for a target call, including
+ * function arguments, stack, return address, etc.
+ *
+ */
+
+static CORE_ADDR
+mn10300_push_dummy_call (struct gdbarch *gdbarch,
+ struct value *target_func,
+ struct regcache *regcache,
+ CORE_ADDR bp_addr,
+ int nargs, struct value **args,
+ CORE_ADDR sp,
+ function_call_return_method return_method,
+ CORE_ADDR struct_addr)
+{
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+ const int push_size = register_size (gdbarch, E_PC_REGNUM);
+ int regs_used;
+ int len, arg_len;
+ int stack_offset = 0;
+ int argnum;
+ const gdb_byte *val;
+ gdb_byte valbuf[MN10300_MAX_REGISTER_SIZE];
+
+ /* This should be a nop, but align the stack just in case something
+ went wrong. Stacks are four byte aligned on the mn10300. */
+ sp &= ~3;
+
+ /* Now make space on the stack for the args.
+
+ XXX This doesn't appear to handle pass-by-invisible reference
+ arguments. */
+ regs_used = (return_method == return_method_struct) ? 1 : 0;
+ for (len = 0, argnum = 0; argnum < nargs; argnum++)
+ {
+ arg_len = (TYPE_LENGTH (value_type (args[argnum])) + 3) & ~3;
+ while (regs_used < 2 && arg_len > 0)
+ {
+ regs_used++;
+ arg_len -= push_size;
+ }
+ len += arg_len;
+ }
+
+ /* Allocate stack space. */
+ sp -= len;
+
+ if (return_method == return_method_struct)
+ {
+ regs_used = 1;
+ regcache_cooked_write_unsigned (regcache, E_D0_REGNUM, struct_addr);
+ }
+ else
+ regs_used = 0;
+
+ /* Push all arguments onto the stack. */
+ for (argnum = 0; argnum < nargs; argnum++)
+ {
+ /* FIXME what about structs? Unions? */
+ if (TYPE_CODE (value_type (*args)) == TYPE_CODE_STRUCT
+ && TYPE_LENGTH (value_type (*args)) > 8)
+ {
+ /* Change to pointer-to-type. */
+ arg_len = push_size;
+ gdb_assert (push_size <= MN10300_MAX_REGISTER_SIZE);
+ store_unsigned_integer (valbuf, push_size, byte_order,
+ value_address (*args));
+ val = &valbuf[0];
+ }
+ else
+ {
+ arg_len = TYPE_LENGTH (value_type (*args));
+ val = value_contents (*args);
+ }
+
+ while (regs_used < 2 && arg_len > 0)
+ {
+ regcache_cooked_write_unsigned (regcache, regs_used,
+ extract_unsigned_integer (val, push_size, byte_order));
+ val += push_size;
+ arg_len -= push_size;
+ regs_used++;
+ }
+
+ while (arg_len > 0)
+ {
+ write_memory (sp + stack_offset, val, push_size);
+ arg_len -= push_size;
+ val += push_size;
+ stack_offset += push_size;
+ }
+
+ args++;
+ }
+
+ /* Make space for the flushback area. */
+ sp -= 8;
+
+ /* Push the return address that contains the magic breakpoint. */
+ sp -= 4;
+ write_memory_unsigned_integer (sp, push_size, byte_order, bp_addr);
+
+ /* The CPU also writes the return address always into the
+ MDR register on "call". */
+ regcache_cooked_write_unsigned (regcache, E_MDR_REGNUM, bp_addr);
+
+ /* Update $sp. */
+ regcache_cooked_write_unsigned (regcache, E_SP_REGNUM, sp);
+
+ /* On the mn10300, it's possible to move some of the stack adjustment
+ and saving of the caller-save registers out of the prologue and
+ into the call sites. (When using gcc, this optimization can
+ occur when using the -mrelax switch.) If this occurs, the dwarf2
+ info will reflect this fact. We can test to see if this is the
+ case by creating a new frame using the current stack pointer and
+ the address of the function that we're about to call. We then
+ unwind SP and see if it's different than the SP of our newly
+ created frame. If the SP values are the same, the caller is not
+ expected to allocate any additional stack. On the other hand, if
+ the SP values are different, the difference determines the
+ additional stack that must be allocated.
+
+ Note that we don't update the return value though because that's
+ the value of the stack just after pushing the arguments, but prior
+ to performing the call. This value is needed in order to
+ construct the frame ID of the dummy call. */
+ {
+ CORE_ADDR func_addr = find_function_addr (target_func, NULL);
+ CORE_ADDR unwound_sp
+ = gdbarch_unwind_sp (gdbarch, create_new_frame (sp, func_addr));
+ if (sp != unwound_sp)
+ regcache_cooked_write_unsigned (regcache, E_SP_REGNUM,
+ sp - (unwound_sp - sp));
+ }
+
+ return sp;
+}
+
+/* If DWARF2 is a register number appearing in Dwarf2 debug info, then
+ mn10300_dwarf2_reg_to_regnum (DWARF2) is the corresponding GDB
+ register number. Why don't Dwarf2 and GDB use the same numbering?
+ Who knows? But since people have object files lying around with
+ the existing Dwarf2 numbering, and other people have written stubs
+ to work with the existing GDB, neither of them can change. So we
+ just have to cope. */
+static int
+mn10300_dwarf2_reg_to_regnum (struct gdbarch *gdbarch, int dwarf2)
+{
+ /* This table is supposed to be shaped like the gdbarch_register_name
+ initializer in gcc/config/mn10300/mn10300.h. Registers which
+ appear in GCC's numbering, but have no counterpart in GDB's
+ world, are marked with a -1. */
+ static int dwarf2_to_gdb[] = {
+ E_D0_REGNUM, E_D1_REGNUM, E_D2_REGNUM, E_D3_REGNUM,
+ E_A0_REGNUM, E_A1_REGNUM, E_A2_REGNUM, E_A3_REGNUM,
+ -1, E_SP_REGNUM,
+
+ E_E0_REGNUM, E_E1_REGNUM, E_E2_REGNUM, E_E3_REGNUM,
+ E_E4_REGNUM, E_E5_REGNUM, E_E6_REGNUM, E_E7_REGNUM,
+
+ E_FS0_REGNUM + 0, E_FS0_REGNUM + 1, E_FS0_REGNUM + 2, E_FS0_REGNUM + 3,
+ E_FS0_REGNUM + 4, E_FS0_REGNUM + 5, E_FS0_REGNUM + 6, E_FS0_REGNUM + 7,
+
+ E_FS0_REGNUM + 8, E_FS0_REGNUM + 9, E_FS0_REGNUM + 10, E_FS0_REGNUM + 11,
+ E_FS0_REGNUM + 12, E_FS0_REGNUM + 13, E_FS0_REGNUM + 14, E_FS0_REGNUM + 15,
+
+ E_FS0_REGNUM + 16, E_FS0_REGNUM + 17, E_FS0_REGNUM + 18, E_FS0_REGNUM + 19,
+ E_FS0_REGNUM + 20, E_FS0_REGNUM + 21, E_FS0_REGNUM + 22, E_FS0_REGNUM + 23,
+
+ E_FS0_REGNUM + 24, E_FS0_REGNUM + 25, E_FS0_REGNUM + 26, E_FS0_REGNUM + 27,
+ E_FS0_REGNUM + 28, E_FS0_REGNUM + 29, E_FS0_REGNUM + 30, E_FS0_REGNUM + 31,
+
+ E_MDR_REGNUM, E_PSW_REGNUM, E_PC_REGNUM
+ };
+
+ if (dwarf2 < 0
+ || dwarf2 >= ARRAY_SIZE (dwarf2_to_gdb))
+ return -1;
+
+ return dwarf2_to_gdb[dwarf2];
+}
+
+static struct gdbarch *
+mn10300_gdbarch_init (struct gdbarch_info info,
+ struct gdbarch_list *arches)
+{
+ struct gdbarch *gdbarch;
+ struct gdbarch_tdep *tdep;
+ int num_regs;
+
+ arches = gdbarch_list_lookup_by_info (arches, &info);
+ if (arches != NULL)
+ return arches->gdbarch;
+
+ tdep = XCNEW (struct gdbarch_tdep);
+ gdbarch = gdbarch_alloc (&info, tdep);
+
+ switch (info.bfd_arch_info->mach)
+ {
+ case 0:
+ case bfd_mach_mn10300:
+ set_gdbarch_register_name (gdbarch, mn10300_generic_register_name);
+ tdep->am33_mode = 0;
+ num_regs = 32;
+ break;
+ case bfd_mach_am33:
+ set_gdbarch_register_name (gdbarch, am33_register_name);
+ tdep->am33_mode = 1;
+ num_regs = 32;
+ break;
+ case bfd_mach_am33_2:
+ set_gdbarch_register_name (gdbarch, am33_2_register_name);
+ tdep->am33_mode = 2;
+ num_regs = 64;
+ set_gdbarch_fp0_regnum (gdbarch, 32);
+ break;
+ default:
+ internal_error (__FILE__, __LINE__,
+ _("mn10300_gdbarch_init: Unknown mn10300 variant"));
+ break;
+ }
+
+ /* By default, chars are unsigned. */
+ set_gdbarch_char_signed (gdbarch, 0);
+
+ /* Registers. */
+ set_gdbarch_num_regs (gdbarch, num_regs);
+ set_gdbarch_register_type (gdbarch, mn10300_register_type);
+ set_gdbarch_skip_prologue (gdbarch, mn10300_skip_prologue);
+ set_gdbarch_pc_regnum (gdbarch, E_PC_REGNUM);
+ set_gdbarch_sp_regnum (gdbarch, E_SP_REGNUM);
+ set_gdbarch_dwarf2_reg_to_regnum (gdbarch, mn10300_dwarf2_reg_to_regnum);
+
+ /* Stack unwinding. */
+ set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
+ /* Breakpoints. */
+ set_gdbarch_breakpoint_kind_from_pc (gdbarch,
+ mn10300_breakpoint::kind_from_pc);
+ set_gdbarch_sw_breakpoint_from_kind (gdbarch,
+ mn10300_breakpoint::bp_from_kind);
+ /* decr_pc_after_break? */
+
+ /* Stage 2 */
+ set_gdbarch_return_value (gdbarch, mn10300_return_value);
+
+ /* Stage 3 -- get target calls working. */
+ set_gdbarch_push_dummy_call (gdbarch, mn10300_push_dummy_call);
+ /* set_gdbarch_return_value (store, extract) */
+
+
+ mn10300_frame_unwind_init (gdbarch);
+
+ /* Hook in ABI-specific overrides, if they have been registered. */
+ gdbarch_init_osabi (info, gdbarch);
+
+ return gdbarch;
+}
+
+/* Dump out the mn10300 specific architecture information. */
+
+static void
+mn10300_dump_tdep (struct gdbarch *gdbarch, struct ui_file *file)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ fprintf_unfiltered (file, "mn10300_dump_tdep: am33_mode = %d\n",
+ tdep->am33_mode);
+}
+
+void
+_initialize_mn10300_tdep (void)
+{
+ gdbarch_register (bfd_arch_mn10300, mn10300_gdbarch_init, mn10300_dump_tdep);
+}
+