/* Remote debugging interface for boot monitors, for GDB.
Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
- 2000, 2001, 2002, 2006, 2007 Free Software Foundation, Inc.
+ 2000, 2001, 2002, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
Contributed by Cygnus Support. Written by Rob Savoye for Cygnus.
Resurrected from the ashes by Stu Grossman.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor,
- Boston, MA 02110-1301, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
/* This file was derived from various remote-* modules. It is a collection
of generic support functions so GDB can talk directly to a ROM based
#include "gdb_regex.h"
#include "srec.h"
#include "regcache.h"
+#include "gdbthread.h"
static char *dev_name;
static struct target_ops *targ_ops;
static void monitor_interrupt_query (void);
static void monitor_interrupt_twice (int);
-static void monitor_stop (void);
+static void monitor_stop (ptid_t);
static void monitor_dump_regs (struct regcache *regcache);
#if 0
static int first_time = 0; /* is this the first time we're executing after
gaving created the child proccess? */
+
+/* This is the ptid we use while we're connected to a monitor. Its
+ value is arbitrary, as monitor targets don't have a notion of
+ processes or threads, but we need something non-null to place in
+ inferior_ptid. */
+static ptid_t monitor_ptid;
+
#define TARGET_BUF_SIZE 2048
/* Monitor specific debugging information. Typically only useful to
if (current_monitor->stop)
{
- monitor_stop ();
+ monitor_stop (inferior_ptid);
if ((current_monitor->flags & MO_NO_ECHO_ON_OPEN) == 0)
{
monitor_debug ("EXP Open echo\n");
push_target (targ_ops);
- inferior_ptid = pid_to_ptid (42000); /* Make run command think we are busy... */
+ /* Start afresh. */
+ init_thread_list ();
+
+ /* Make run command think we are busy... */
+ inferior_ptid = monitor_ptid;
+ add_inferior_silent (ptid_get_pid (inferior_ptid));
+ add_thread_silent (inferior_ptid);
/* Give monitor_wait something to read */
}
monitor_desc = NULL;
+
+ delete_thread_silent (monitor_ptid);
+ delete_inferior_silent (ptid_get_pid (monitor_ptid));
}
/* Terminate the open connection to the remote debugger. Use this
when you want to detach and do something else with your gdb. */
static void
-monitor_detach (char *args, int from_tty)
+monitor_detach (struct target_ops *ops, char *args, int from_tty)
{
pop_target (); /* calls monitor_close to do the real work */
if (from_tty)
/* supply register stores in target byte order, so swap here */
- store_unsigned_integer (regbuf, register_size (current_gdbarch, regno), val);
+ store_unsigned_integer (regbuf,
+ register_size (get_regcache_arch (regcache), regno),
+ val);
regcache_raw_supply (regcache, regno, regbuf);
/* Tell the remote machine to resume. */
static void
-monitor_resume (ptid_t ptid, int step, enum target_signal sig)
+monitor_resume (struct target_ops *ops,
+ ptid_t ptid, int step, enum target_signal sig)
{
/* Some monitors require a different command when starting a program */
monitor_debug ("MON resume\n");
if (monitor_debug_p || remote_debug)
fprintf_unfiltered (gdb_stdlog, "monitor_interrupt called\n");
- target_stop ();
+ target_stop (inferior_ptid);
}
/* The user typed ^C twice. */
{
target_terminal_ours ();
- if (query ("Interrupted while waiting for the program.\n\
-Give up (and stop debugging it)? "))
+ if (query (_("Interrupted while waiting for the program.\n\
+Give up (and stop debugging it)? ")))
{
target_mourn_inferior ();
deprecated_throw_reason (RETURN_QUIT);
status just as `wait' would. */
static ptid_t
-monitor_wait (ptid_t ptid, struct target_waitstatus *status)
+monitor_wait (struct target_ops *ops,
+ ptid_t ptid, struct target_waitstatus *status, int options)
{
int old_timeout = timeout;
char buf[TARGET_BUF_SIZE];
}
if (current_monitor->register_pattern)
- parse_register_dump (current_regcache, buf, resp_len);
+ parse_register_dump (get_current_regcache (), buf, resp_len);
#else
monitor_debug ("Wait fetching registers after stop\n");
- monitor_dump_regs (current_regcache);
+ monitor_dump_regs (get_current_regcache ());
#endif
status->kind = TARGET_WAITKIND_STOPPED;
spaces, but stop reading if something else is seen. Some monitors
like to drop leading zeros. */
- for (i = 0; i < register_size (current_gdbarch, regno) * 2; i++)
+ for (i = 0; i < register_size (get_regcache_arch (regcache), regno) * 2; i++)
{
int c;
c = readchar (timeout);
}
static void
-monitor_fetch_registers (struct regcache *regcache, int regno)
+monitor_fetch_registers (struct target_ops *ops,
+ struct regcache *regcache, int regno)
{
monitor_debug ("MON fetchregs\n");
if (current_monitor->getreg.cmd)
return;
}
- for (regno = 0; regno < gdbarch_num_regs (current_gdbarch); regno++)
+ for (regno = 0; regno < gdbarch_num_regs (get_regcache_arch (regcache));
+ regno++)
monitor_fetch_register (regcache, regno);
}
else
regcache_cooked_read_unsigned (regcache, regno, &val);
monitor_debug ("MON storeg %d %s\n", regno,
- phex (val, register_size (current_gdbarch, regno)));
+ phex (val,
+ register_size (get_regcache_arch (regcache), regno)));
/* send the register deposit command */
/* Store the remote registers. */
static void
-monitor_store_registers (struct regcache *regcache, int regno)
+monitor_store_registers (struct target_ops *ops,
+ struct regcache *regcache, int regno)
{
if (regno >= 0)
{
return;
}
- for (regno = 0; regno < gdbarch_num_regs (current_gdbarch); regno++)
+ for (regno = 0; regno < gdbarch_num_regs (get_regcache_arch (regcache));
+ regno++)
monitor_store_register (regcache, regno);
}
monitor_debug ("MON write %d %s\n", len, paddr (memaddr));
if (current_monitor->flags & MO_ADDR_BITS_REMOVE)
- memaddr = gdbarch_addr_bits_remove (current_gdbarch, memaddr);
+ memaddr = gdbarch_addr_bits_remove (target_gdbarch, memaddr);
/* Use memory fill command for leading 0 bytes. */
paddr_nz (memaddr), (long) myaddr, len);
if (current_monitor->flags & MO_ADDR_BITS_REMOVE)
- memaddr = gdbarch_addr_bits_remove (current_gdbarch, memaddr);
+ memaddr = gdbarch_addr_bits_remove (target_gdbarch, memaddr);
if (current_monitor->flags & MO_GETMEM_READ_SINGLE)
return monitor_read_memory_single (memaddr, myaddr, len);
}
static void
-monitor_kill (void)
+monitor_kill (struct target_ops *ops)
{
return; /* ignore attempts to kill target system */
}
/* All we actually do is set the PC to the start address of exec_bfd. */
static void
-monitor_create_inferior (char *exec_file, char *args, char **env,
- int from_tty)
+monitor_create_inferior (struct target_ops *ops, char *exec_file,
+ char *args, char **env, int from_tty)
{
if (args && (*args != '\000'))
error (_("Args are not supported by the monitor."));
first_time = 1;
clear_proceed_status ();
- write_pc (bfd_get_start_address (exec_bfd));
+ regcache_write_pc (get_current_regcache (),
+ bfd_get_start_address (exec_bfd));
}
/* Clean up when a program exits.
instructions. */
static void
-monitor_mourn_inferior (void)
+monitor_mourn_inferior (struct target_ops *ops)
{
unpush_target (targ_ops);
generic_mourn_inferior (); /* Do all the proper things now */
+ delete_thread_silent (monitor_ptid);
}
/* Tell the monitor to add a breakpoint. */
static int
-monitor_insert_breakpoint (struct bp_target_info *bp_tgt)
+monitor_insert_breakpoint (struct gdbarch *gdbarch,
+ struct bp_target_info *bp_tgt)
{
CORE_ADDR addr = bp_tgt->placed_address;
int i;
- const unsigned char *bp;
int bplen;
monitor_debug ("MON inst bkpt %s\n", paddr (addr));
error (_("No set_break defined for this monitor"));
if (current_monitor->flags & MO_ADDR_BITS_REMOVE)
- addr = gdbarch_addr_bits_remove (current_gdbarch, addr);
+ addr = gdbarch_addr_bits_remove (gdbarch, addr);
/* Determine appropriate breakpoint size for this address. */
- bp = gdbarch_breakpoint_from_pc (current_gdbarch, &addr, &bplen);
+ gdbarch_breakpoint_from_pc (gdbarch, &addr, &bplen);
bp_tgt->placed_address = addr;
bp_tgt->placed_size = bplen;
/* Tell the monitor to remove a breakpoint. */
static int
-monitor_remove_breakpoint (struct bp_target_info *bp_tgt)
+monitor_remove_breakpoint (struct gdbarch *gdbarch,
+ struct bp_target_info *bp_tgt)
{
CORE_ADDR addr = bp_tgt->placed_address;
int i;
/* Finally, make the PC point at the start address */
if (exec_bfd)
- write_pc (bfd_get_start_address (exec_bfd));
+ regcache_write_pc (get_current_regcache (),
+ bfd_get_start_address (exec_bfd));
/* There used to be code here which would clear inferior_ptid and
call clear_symtab_users. None of that should be necessary:
}
static void
-monitor_stop (void)
+monitor_stop (ptid_t ptid)
{
monitor_debug ("MON stop\n");
if ((current_monitor->flags & MO_SEND_BREAK_ON_STOP) != 0)
return dev_name;
}
+/* Check to see if a thread is still alive. */
+
+static int
+monitor_thread_alive (struct target_ops *ops, ptid_t ptid)
+{
+ if (ptid_equal (ptid, monitor_ptid))
+ /* The monitor's task is always alive. */
+ return 1;
+
+ return 0;
+}
+
+/* Convert a thread ID to a string. Returns the string in a static
+ buffer. */
+
+static char *
+monitor_pid_to_str (struct target_ops *ops, ptid_t ptid)
+{
+ static char buf[64];
+
+ if (ptid_equal (monitor_ptid, ptid))
+ {
+ xsnprintf (buf, sizeof buf, "Thread <main>");
+ return buf;
+ }
+
+ return normal_pid_to_str (ptid);
+}
+
static struct target_ops monitor_ops;
static void
monitor_ops.to_mourn_inferior = monitor_mourn_inferior;
monitor_ops.to_stop = monitor_stop;
monitor_ops.to_rcmd = monitor_rcmd;
+ monitor_ops.to_log_command = serial_log_command;
+ monitor_ops.to_thread_alive = monitor_thread_alive;
+ monitor_ops.to_pid_to_str = monitor_pid_to_str;
monitor_ops.to_stratum = process_stratum;
- monitor_ops.to_has_all_memory = 1;
- monitor_ops.to_has_memory = 1;
- monitor_ops.to_has_stack = 1;
- monitor_ops.to_has_registers = 1;
- monitor_ops.to_has_execution = 1;
+ monitor_ops.to_has_all_memory = default_child_has_all_memory;
+ monitor_ops.to_has_memory = default_child_has_memory;
+ monitor_ops.to_has_stack = default_child_has_stack;
+ monitor_ops.to_has_registers = default_child_has_registers;
+ monitor_ops.to_has_execution = default_child_has_execution;
monitor_ops.to_magic = OPS_MAGIC;
} /* init_base_monitor_ops */
NULL,
NULL, /* FIXME: i18n: */
&setdebuglist, &showdebuglist);
+
+ /* Yes, 42000 is arbitrary. The only sense out of it, is that it
+ isn't 0. */
+ monitor_ptid = ptid_build (42000, 0, 42000);
}
projects / deliverable / binutils-gdb.git / blobdiff