/* GDB routines for manipulating objfiles.
Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
- 2002, 2003, 2004, 2007, 2008, 2009 Free Software Foundation, Inc.
+ 2002, 2003, 2004, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
Contributed by Cygnus Support, using pieces from other GDB modules.
#include "exec.h"
#include "observer.h"
#include "complaints.h"
+#include "psymtab.h"
+#include "solist.h"
/* Prototypes for local functions */
struct objfile *
allocate_objfile (bfd *abfd, int flags)
{
- struct objfile *objfile = NULL;
- struct objfile *last_one = NULL;
+ struct objfile *objfile;
- /* If we don't support mapped symbol files, didn't ask for the file to be
- mapped, or failed to open the mapped file for some reason, then revert
- back to an unmapped objfile. */
-
- if (objfile == NULL)
- {
- objfile = (struct objfile *) xmalloc (sizeof (struct objfile));
- memset (objfile, 0, sizeof (struct objfile));
- objfile->psymbol_cache = bcache_xmalloc ();
- objfile->macro_cache = bcache_xmalloc ();
- /* We could use obstack_specify_allocation here instead, but
- gdb_obstack.h specifies the alloc/dealloc functions. */
- obstack_init (&objfile->objfile_obstack);
- terminate_minimal_symbol_table (objfile);
- }
+ objfile = (struct objfile *) xzalloc (sizeof (struct objfile));
+ objfile->psymbol_cache = psymbol_bcache_init ();
+ objfile->macro_cache = bcache_xmalloc (NULL, NULL);
+ objfile->filename_cache = bcache_xmalloc (NULL, NULL);
+ /* We could use obstack_specify_allocation here instead, but
+ gdb_obstack.h specifies the alloc/dealloc functions. */
+ obstack_init (&objfile->objfile_obstack);
+ terminate_minimal_symbol_table (objfile);
objfile_alloc_data (objfile);
region. */
objfile->obfd = gdb_bfd_ref (abfd);
- if (objfile->name != NULL)
- {
- xfree (objfile->name);
- }
if (abfd != NULL)
{
/* Look up the gdbarch associated with the BFD. */
object_files = objfile;
else
{
+ struct objfile *last_one;
+
for (last_one = object_files;
last_one->next;
last_one = last_one->next);
/* Executable file -- record its entry point so we'll recognize
the startup file because it contains the entry point. */
objfile->ei.entry_point = bfd_get_start_address (objfile->obfd);
+ objfile->ei.entry_point_p = 1;
}
else if (bfd_get_file_flags (objfile->obfd) & DYNAMIC
&& bfd_get_start_address (objfile->obfd) != 0)
- /* Some shared libraries may have entry points set and be
- runnable. There's no clear way to indicate this, so just check
- for values other than zero. */
- objfile->ei.entry_point = bfd_get_start_address (objfile->obfd);
+ {
+ /* Some shared libraries may have entry points set and be
+ runnable. There's no clear way to indicate this, so just check
+ for values other than zero. */
+ objfile->ei.entry_point = bfd_get_start_address (objfile->obfd);
+ objfile->ei.entry_point_p = 1;
+ }
else
{
/* Examination of non-executable.o files. Short-circuit this stuff. */
- objfile->ei.entry_point = INVALID_ENTRY_POINT;
+ objfile->ei.entry_point_p = 0;
}
}
-/* Get current entry point address. */
+/* If there is a valid and known entry point, function fills *ENTRY_P with it
+ and returns non-zero; otherwise it returns zero. */
-CORE_ADDR
-entry_point_address (void)
+int
+entry_point_address_query (CORE_ADDR *entry_p)
{
struct gdbarch *gdbarch;
CORE_ADDR entry_point;
- if (symfile_objfile == NULL)
+ if (symfile_objfile == NULL || !symfile_objfile->ei.entry_point_p)
return 0;
gdbarch = get_objfile_arch (symfile_objfile);
symbol table. */
entry_point = gdbarch_addr_bits_remove (gdbarch, entry_point);
- return entry_point;
+ *entry_p = entry_point;
+ return 1;
+}
+
+/* Get current entry point address. Call error if it is not known. */
+
+CORE_ADDR
+entry_point_address (void)
+{
+ CORE_ADDR retval;
+
+ if (!entry_point_address_query (&retval))
+ error (_("Entry point address is not known."));
+
+ return retval;
}
/* Create the terminating entry of OBJFILE's minimal symbol table.
memset (m, 0, sizeof (*m));
/* Don't rely on these enumeration values being 0's. */
MSYMBOL_TYPE (m) = mst_unknown;
- SYMBOL_INIT_LANGUAGE_SPECIFIC (m, language_unknown);
+ SYMBOL_SET_LANGUAGE (m, language_unknown);
}
}
+/* Iterator on PARENT and every separate debug objfile of PARENT.
+ The usage pattern is:
+ for (objfile = parent;
+ objfile;
+ objfile = objfile_separate_debug_iterate (parent, objfile))
+ ...
+*/
+
+struct objfile *
+objfile_separate_debug_iterate (const struct objfile *parent,
+ const struct objfile *objfile)
+{
+ struct objfile *res;
+
+ /* If any, return the first child. */
+ res = objfile->separate_debug_objfile;
+ if (res)
+ return res;
+
+ /* Common case where there is no separate debug objfile. */
+ if (objfile == parent)
+ return NULL;
+
+ /* Return the brother if any. Note that we don't iterate on brothers of
+ the parents. */
+ res = objfile->separate_debug_objfile_link;
+ if (res)
+ return res;
+
+ for (res = objfile->separate_debug_objfile_backlink;
+ res != parent;
+ res = res->separate_debug_objfile_backlink)
+ {
+ gdb_assert (res != NULL);
+ if (res->separate_debug_objfile_link)
+ return res->separate_debug_objfile_link;
+ }
+ return NULL;
+}
/* Put one object file before a specified on in the global list.
This can be used to make sure an object file is destroyed before
_("unlink_objfile: objfile already unlinked"));
}
+/* Add OBJFILE as a separate debug objfile of PARENT. */
+
+void
+add_separate_debug_objfile (struct objfile *objfile, struct objfile *parent)
+{
+ gdb_assert (objfile && parent);
+
+ /* Must not be already in a list. */
+ gdb_assert (objfile->separate_debug_objfile_backlink == NULL);
+ gdb_assert (objfile->separate_debug_objfile_link == NULL);
+
+ objfile->separate_debug_objfile_backlink = parent;
+ objfile->separate_debug_objfile_link = parent->separate_debug_objfile;
+ parent->separate_debug_objfile = objfile;
+
+ /* Put the separate debug object before the normal one, this is so that
+ usage of the ALL_OBJFILES_SAFE macro will stay safe. */
+ put_objfile_before (objfile, parent);
+}
+
+/* Free all separate debug objfile of OBJFILE, but don't free OBJFILE
+ itself. */
+
+void
+free_objfile_separate_debug (struct objfile *objfile)
+{
+ struct objfile *child;
+
+ for (child = objfile->separate_debug_objfile; child;)
+ {
+ struct objfile *next_child = child->separate_debug_objfile_link;
+ free_objfile (child);
+ child = next_child;
+ }
+}
/* Destroy an objfile and all the symtabs and psymtabs under it. Note
that as much as possible is allocated on the objfile_obstack
void
free_objfile (struct objfile *objfile)
{
- if (objfile->separate_debug_objfile)
- {
- free_objfile (objfile->separate_debug_objfile);
- }
-
+ /* Free all separate debug objfiles. */
+ free_objfile_separate_debug (objfile);
+
if (objfile->separate_debug_objfile_backlink)
{
/* We freed the separate debug file, make sure the base objfile
doesn't reference it. */
- objfile->separate_debug_objfile_backlink->separate_debug_objfile = NULL;
+ struct objfile *child;
+
+ child = objfile->separate_debug_objfile_backlink->separate_debug_objfile;
+
+ if (child == objfile)
+ {
+ /* OBJFILE is the first child. */
+ objfile->separate_debug_objfile_backlink->separate_debug_objfile =
+ objfile->separate_debug_objfile_link;
+ }
+ else
+ {
+ /* Find OBJFILE in the list. */
+ while (1)
+ {
+ if (child->separate_debug_objfile_link == objfile)
+ {
+ child->separate_debug_objfile_link =
+ objfile->separate_debug_objfile_link;
+ break;
+ }
+ child = child->separate_debug_objfile_link;
+ gdb_assert (child);
+ }
+ }
}
/* Remove any references to this objfile in the global value
/* The last thing we do is free the objfile struct itself. */
- if (objfile->name != NULL)
- {
- xfree (objfile->name);
- }
+ xfree (objfile->name);
if (objfile->global_psymbols.list)
xfree (objfile->global_psymbols.list);
if (objfile->static_psymbols.list)
xfree (objfile->static_psymbols.list);
/* Free the obstacks for non-reusable objfiles */
- bcache_xfree (objfile->psymbol_cache);
+ psymbol_bcache_free (objfile->psymbol_cache);
bcache_xfree (objfile->macro_cache);
+ bcache_xfree (objfile->filename_cache);
if (objfile->demangled_names_hash)
htab_delete (objfile->demangled_names_hash);
obstack_free (&objfile->objfile_obstack, 0);
free_all_objfiles (void)
{
struct objfile *objfile, *temp;
+ struct so_list *so;
+
+ /* Any objfile referencewould become stale. */
+ for (so = master_so_list (); so; so = so->next)
+ gdb_assert (so->objfile == NULL);
ALL_OBJFILES_SAFE (objfile, temp)
{
free_objfile (objfile);
}
- clear_symtab_users ();
+ clear_symtab_users (0);
}
\f
+/* A helper function for objfile_relocate1 that relocates a single
+ symbol. */
+
+static void
+relocate_one_symbol (struct symbol *sym, struct objfile *objfile,
+ struct section_offsets *delta)
+{
+ fixup_symbol_section (sym, objfile);
+
+ /* The RS6000 code from which this was taken skipped
+ any symbols in STRUCT_DOMAIN or UNDEF_DOMAIN.
+ But I'm leaving out that test, on the theory that
+ they can't possibly pass the tests below. */
+ if ((SYMBOL_CLASS (sym) == LOC_LABEL
+ || SYMBOL_CLASS (sym) == LOC_STATIC)
+ && SYMBOL_SECTION (sym) >= 0)
+ {
+ SYMBOL_VALUE_ADDRESS (sym) += ANOFFSET (delta, SYMBOL_SECTION (sym));
+ }
+}
+
/* Relocate OBJFILE to NEW_OFFSETS. There should be OBJFILE->NUM_SECTIONS
- entries in new_offsets. */
-void
-objfile_relocate (struct objfile *objfile, struct section_offsets *new_offsets)
+ entries in new_offsets. SEPARATE_DEBUG_OBJFILE is not touched here.
+ Return non-zero iff any change happened. */
+
+static int
+objfile_relocate1 (struct objfile *objfile,
+ struct section_offsets *new_offsets)
{
struct obj_section *s;
struct section_offsets *delta =
((struct section_offsets *)
alloca (SIZEOF_N_SECTION_OFFSETS (objfile->num_sections)));
- {
- int i;
- int something_changed = 0;
- for (i = 0; i < objfile->num_sections; ++i)
- {
- delta->offsets[i] =
- ANOFFSET (new_offsets, i) - ANOFFSET (objfile->section_offsets, i);
- if (ANOFFSET (delta, i) != 0)
- something_changed = 1;
- }
- if (!something_changed)
- return;
- }
+ int i;
+ int something_changed = 0;
+
+ for (i = 0; i < objfile->num_sections; ++i)
+ {
+ delta->offsets[i] =
+ ANOFFSET (new_offsets, i) - ANOFFSET (objfile->section_offsets, i);
+ if (ANOFFSET (delta, i) != 0)
+ something_changed = 1;
+ }
+ if (!something_changed)
+ return 0;
/* OK, get all the symtabs. */
{
ALL_BLOCK_SYMBOLS (b, iter, sym)
{
- fixup_symbol_section (sym, objfile);
-
- /* The RS6000 code from which this was taken skipped
- any symbols in STRUCT_DOMAIN or UNDEF_DOMAIN.
- But I'm leaving out that test, on the theory that
- they can't possibly pass the tests below. */
- if ((SYMBOL_CLASS (sym) == LOC_LABEL
- || SYMBOL_CLASS (sym) == LOC_STATIC)
- && SYMBOL_SECTION (sym) >= 0)
- {
- SYMBOL_VALUE_ADDRESS (sym) +=
- ANOFFSET (delta, SYMBOL_SECTION (sym));
- }
+ relocate_one_symbol (sym, objfile, delta);
}
}
}
}
+ /* Relocate isolated symbols. */
{
- struct partial_symtab *p;
+ struct symbol *iter;
- ALL_OBJFILE_PSYMTABS (objfile, p)
- {
- p->textlow += ANOFFSET (delta, SECT_OFF_TEXT (objfile));
- p->texthigh += ANOFFSET (delta, SECT_OFF_TEXT (objfile));
- }
+ for (iter = objfile->template_symbols; iter; iter = iter->hash_next)
+ relocate_one_symbol (iter, objfile, delta);
}
- {
- struct partial_symbol **psym;
+ if (objfile->psymtabs_addrmap)
+ addrmap_relocate (objfile->psymtabs_addrmap,
+ ANOFFSET (delta, SECT_OFF_TEXT (objfile)));
- for (psym = objfile->global_psymbols.list;
- psym < objfile->global_psymbols.next;
- psym++)
- {
- fixup_psymbol_section (*psym, objfile);
- if (SYMBOL_SECTION (*psym) >= 0)
- SYMBOL_VALUE_ADDRESS (*psym) += ANOFFSET (delta,
- SYMBOL_SECTION (*psym));
- }
- for (psym = objfile->static_psymbols.list;
- psym < objfile->static_psymbols.next;
- psym++)
- {
- fixup_psymbol_section (*psym, objfile);
- if (SYMBOL_SECTION (*psym) >= 0)
- SYMBOL_VALUE_ADDRESS (*psym) += ANOFFSET (delta,
- SYMBOL_SECTION (*psym));
- }
- }
+ if (objfile->sf)
+ objfile->sf->qf->relocate (objfile, new_offsets, delta);
{
struct minimal_symbol *msym;
+
ALL_OBJFILE_MSYMBOLS (objfile, msym)
if (SYMBOL_SECTION (msym) >= 0)
SYMBOL_VALUE_ADDRESS (msym) += ANOFFSET (delta, SYMBOL_SECTION (msym));
to be out of order. */
msymbols_sort (objfile);
- if (objfile->ei.entry_point != ~(CORE_ADDR) 0)
+ if (objfile->ei.entry_point_p)
{
/* Relocate ei.entry_point with its section offset, use SECT_OFF_TEXT
only as a fallback. */
{
int i;
+
for (i = 0; i < objfile->num_sections; ++i)
(objfile->section_offsets)->offsets[i] = ANOFFSET (new_offsets, i);
}
obj_section_addr (s));
}
+ /* Data changed. */
+ return 1;
+}
+
+/* Relocate OBJFILE to NEW_OFFSETS. There should be OBJFILE->NUM_SECTIONS
+ entries in new_offsets. Process also OBJFILE's SEPARATE_DEBUG_OBJFILEs.
+
+ The number and ordering of sections does differ between the two objfiles.
+ Only their names match. Also the file offsets will differ (objfile being
+ possibly prelinked but separate_debug_objfile is probably not prelinked) but
+ the in-memory absolute address as specified by NEW_OFFSETS must match both
+ files. */
+
+void
+objfile_relocate (struct objfile *objfile, struct section_offsets *new_offsets)
+{
+ struct objfile *debug_objfile;
+ int changed = 0;
+
+ changed |= objfile_relocate1 (objfile, new_offsets);
+
+ for (debug_objfile = objfile->separate_debug_objfile;
+ debug_objfile;
+ debug_objfile = objfile_separate_debug_iterate (objfile, debug_objfile))
+ {
+ struct section_addr_info *objfile_addrs;
+ struct section_offsets *new_debug_offsets;
+ struct cleanup *my_cleanups;
+
+ objfile_addrs = build_section_addr_info_from_objfile (objfile);
+ my_cleanups = make_cleanup (xfree, objfile_addrs);
+
+ /* Here OBJFILE_ADDRS contain the correct absolute addresses, the
+ relative ones must be already created according to debug_objfile. */
+
+ addr_info_make_relative (objfile_addrs, debug_objfile->obfd);
+
+ gdb_assert (debug_objfile->num_sections
+ == bfd_count_sections (debug_objfile->obfd));
+ new_debug_offsets =
+ xmalloc (SIZEOF_N_SECTION_OFFSETS (debug_objfile->num_sections));
+ make_cleanup (xfree, new_debug_offsets);
+ relative_addr_info_to_section_offsets (new_debug_offsets,
+ debug_objfile->num_sections,
+ objfile_addrs);
+
+ changed |= objfile_relocate1 (debug_objfile, new_debug_offsets);
+
+ do_cleanups (my_cleanups);
+ }
+
/* Relocate breakpoints as necessary, after things are relocated. */
- breakpoint_re_set ();
+ if (changed)
+ breakpoint_re_set ();
}
\f
/* Return non-zero if OBJFILE has partial symbols. */
int
objfile_has_partial_symbols (struct objfile *objfile)
{
- return objfile->psymtabs != NULL;
+ return objfile->sf ? objfile->sf->qf->has_symbols (objfile) : 0;
}
/* Return non-zero if OBJFILE has full symbols. */
}
/* Return non-zero if OBJFILE has full or partial symbols, either directly
- or throught its separate debug file. */
+ or through a separate debug file. */
int
objfile_has_symbols (struct objfile *objfile)
{
- struct objfile *separate_objfile;
-
- if (objfile_has_partial_symbols (objfile)
- || objfile_has_full_symbols (objfile))
- return 1;
-
- separate_objfile = objfile->separate_debug_objfile;
- if (separate_objfile == NULL)
- return 0;
-
- if (objfile_has_partial_symbols (separate_objfile)
- || objfile_has_full_symbols (separate_objfile))
- return 1;
+ struct objfile *o;
+ for (o = objfile; o; o = objfile_separate_debug_iterate (objfile, o))
+ if (objfile_has_partial_symbols (o) || objfile_has_full_symbols (o))
+ return 1;
return 0;
}
else if (sect1_addr > sect2_addr)
return 1;
else
- {
- /* Sections are at the same address. This could happen if
- A) we have an objfile and a separate debuginfo.
- B) we are confused, and have added sections without proper relocation,
- or something like that. */
-
- const struct objfile *const objfile1 = sect1->objfile;
- const struct objfile *const objfile2 = sect2->objfile;
-
- if (objfile1->separate_debug_objfile == objfile2
- || objfile2->separate_debug_objfile == objfile1)
- {
- /* Case A. The ordering doesn't matter: separate debuginfo files
- will be filtered out later. */
-
- return 0;
- }
-
- /* Case B. Maintain stable sort order, so bugs in GDB are easier to
- triage. This section could be slow (since we iterate over all
- objfiles in each call to qsort_cmp), but this shouldn't happen
- very often (GDB is already in a confused state; one hopes this
- doesn't happen at all). If you discover that significant time is
- spent in the loops below, do 'set complaints 100' and examine the
- resulting complaints. */
-
- if (objfile1 == objfile2)
- {
- /* Both sections came from the same objfile. We are really confused.
- Sort on sequence order of sections within the objfile. */
-
- const struct obj_section *osect;
-
- ALL_OBJFILE_OSECTIONS (objfile1, osect)
- if (osect == sect1)
- return -1;
- else if (osect == sect2)
- return 1;
-
- /* We should have found one of the sections before getting here. */
- gdb_assert (0);
- }
- else
- {
- /* Sort on sequence number of the objfile in the chain. */
-
- const struct objfile *objfile;
-
- ALL_OBJFILES (objfile)
- if (objfile == objfile1)
- return -1;
- else if (objfile == objfile2)
- return 1;
-
- /* We should have found one of the objfiles before getting here. */
- gdb_assert (0);
- }
-
- }
+ {
+ /* Sections are at the same address. This could happen if
+ A) we have an objfile and a separate debuginfo.
+ B) we are confused, and have added sections without proper relocation,
+ or something like that. */
+
+ const struct objfile *const objfile1 = sect1->objfile;
+ const struct objfile *const objfile2 = sect2->objfile;
+
+ if (objfile1->separate_debug_objfile == objfile2
+ || objfile2->separate_debug_objfile == objfile1)
+ {
+ /* Case A. The ordering doesn't matter: separate debuginfo files
+ will be filtered out later. */
+
+ return 0;
+ }
+
+ /* Case B. Maintain stable sort order, so bugs in GDB are easier to
+ triage. This section could be slow (since we iterate over all
+ objfiles in each call to qsort_cmp), but this shouldn't happen
+ very often (GDB is already in a confused state; one hopes this
+ doesn't happen at all). If you discover that significant time is
+ spent in the loops below, do 'set complaints 100' and examine the
+ resulting complaints. */
+
+ if (objfile1 == objfile2)
+ {
+ /* Both sections came from the same objfile. We are really confused.
+ Sort on sequence order of sections within the objfile. */
+
+ const struct obj_section *osect;
+
+ ALL_OBJFILE_OSECTIONS (objfile1, osect)
+ if (osect == sect1)
+ return -1;
+ else if (osect == sect2)
+ return 1;
+
+ /* We should have found one of the sections before getting here. */
+ gdb_assert_not_reached ("section not found");
+ }
+ else
+ {
+ /* Sort on sequence number of the objfile in the chain. */
+
+ const struct objfile *objfile;
+
+ ALL_OBJFILES (objfile)
+ if (objfile == objfile1)
+ return -1;
+ else if (objfile == objfile2)
+ return 1;
+
+ /* We should have found one of the objfiles before getting here. */
+ gdb_assert_not_reached ("objfile not found");
+ }
+ }
/* Unreachable. */
- gdb_assert (0);
+ gdb_assert_not_reached ("unexpected code path");
return 0;
}
if (insert_section_p (objfile->obfd, s->the_bfd_section))
alloc_size += 1;
+ /* This happens on detach/attach (e.g. in gdb.base/attach.exp). */
+ if (alloc_size == 0)
+ {
+ *pmap = NULL;
+ *pmap_size = 0;
+ return;
+ }
+
map = xmalloc (alloc_size * sizeof (*map));
i = 0;
pspace_info->objfiles_changed_p = 0;
}
+ /* The C standard (ISO/IEC 9899:TC2) requires the BASE argument to
+ bsearch be non-NULL. */
+ if (pspace_info->sections == NULL)
+ {
+ gdb_assert (pspace_info->num_sections == 0);
+ return NULL;
+ }
+
sp = (struct obj_section **) bsearch (&pc,
pspace_info->sections,
pspace_info->num_sections,
get_objfile_pspace_data (current_program_space)->objfiles_changed_p = 1;
}
+/* Close ABFD, and warn if that fails. */
+
+int
+gdb_bfd_close_or_warn (struct bfd *abfd)
+{
+ int ret;
+ char *name = bfd_get_filename (abfd);
+
+ ret = bfd_close (abfd);
+
+ if (!ret)
+ warning (_("cannot close \"%s\": %s"),
+ name, bfd_errmsg (bfd_get_error ()));
+
+ return ret;
+}
+
/* Add reference to ABFD. Returns ABFD. */
struct bfd *
gdb_bfd_ref (struct bfd *abfd)
{
- int *p_refcount = bfd_usrdata (abfd);
+ int *p_refcount;
+
+ if (abfd == NULL)
+ return NULL;
+
+ p_refcount = bfd_usrdata (abfd);
if (p_refcount != NULL)
{
bfd_usrdata (abfd) = NULL; /* Paranoia. */
name = bfd_get_filename (abfd);
- if (!bfd_close (abfd))
- warning (_("cannot close \"%s\": %s"),
- name, bfd_errmsg (bfd_get_error ()));
+ gdb_bfd_close_or_warn (abfd);
xfree (name);
}
projects / deliverable / binutils-gdb.git / blobdiff