/* Definitions for symbol file management in GDB.
- Copyright (C) 1992 Free Software Foundation, Inc.
-This file is part of GDB.
+ Copyright 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+ 2001, 2002, 2003 Free Software Foundation, Inc.
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
+ This file is part of GDB.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
#if !defined (OBJFILES_H)
#define OBJFILES_H
+#include "gdb_obstack.h" /* For obstack internals. */
+#include "symfile.h" /* For struct psymbol_allocation_list */
+
+struct bcache;
+struct htab;
+
/* This structure maintains information on a per-objfile basis about the
"entry point" of the objfile, and the scope within which the entry point
exists. It is possible that gdb will see more than one objfile that is
- executable, each with it's own entry point.
+ executable, each with its own entry point.
For example, for dynamically linked executables in SVR4, the dynamic linker
code is contained within the shared C library, which is actually executable
executable which correspond to the "startup file", I.E. crt0.o in most
cases. This file is assumed to be a startup file and frames with pc's
inside it are treated as nonexistent. Setting these variables is necessary
- so that backtraces do not fly off the bottom of the stack (or top, depending
- upon your stack orientation).
+ so that backtraces do not fly off the bottom of the stack.
- Gdb also supports an alternate method to avoid running off the top/bottom
+ Gdb also supports an alternate method to avoid running off the bottom
of the stack.
There are two frames that are "special", the frame for the function
confused. However, we almost always have debugging information
available for main().
- These variables are used to save the range of PC values which are valid
- within the main() function and within the function containing the process
- entry point. If we always consider the frame for main() as the outermost
- frame when debugging user code, and the frame for the process entry
- point function as the outermost frame when debugging startup code, then
- all we have to do is have FRAME_CHAIN_VALID return false whenever a
- frame's current PC is within the range specified by these variables.
- In essence, we set "ceilings" in the frame chain beyond which we will
+ These variables are used to save the range of PC values which are
+ valid within the main() function and within the function containing
+ the process entry point. If we always consider the frame for
+ main() as the outermost frame when debugging user code, and the
+ frame for the process entry point function as the outermost frame
+ when debugging startup code, then all we have to do is have
+ DEPRECATED_FRAME_CHAIN_VALID return false whenever a frame's
+ current PC is within the range specified by these variables. In
+ essence, we set "ceilings" in the frame chain beyond which we will
not proceed when following the frame chain back up the stack.
A nice side effect is that we can still debug startup code without
information but we do have usable information for main(), backtraces
from user code don't go wandering off into the startup code.
- To use this method, define your FRAME_CHAIN_VALID macro like:
+ To use this method, define your DEPRECATED_FRAME_CHAIN_VALID macro
+ like:
- #define FRAME_CHAIN_VALID(chain, thisframe) \
- (chain != 0 \
- && !(inside_main_func ((thisframe)->pc)) \
- && !(inside_entry_func ((thisframe)->pc)))
+ #define DEPRECATED_FRAME_CHAIN_VALID(chain, thisframe) \
+ (chain != 0 \
+ && !(inside_main_func ((thisframe)->pc)) \
+ && !(inside_entry_func ((thisframe)->pc)))
and add initializations of the four scope controlling variables inside
the object file / debugging information processing modules. */
struct entry_info
-{
-
- /* The value we should use for this objects entry point.
- The illegal/unknown value needs to be something other than 0, ~0
- for instance, which is much less likely than 0. */
+ {
+
+ /* The value we should use for this objects entry point.
+ The illegal/unknown value needs to be something other than 0, ~0
+ for instance, which is much less likely than 0. */
+
+ CORE_ADDR entry_point;
+
+#define INVALID_ENTRY_POINT (~0) /* ~0 will not be in any file, we hope. */
+
+ /* Start (inclusive) and end (exclusive) of function containing the
+ entry point. */
+
+ CORE_ADDR entry_func_lowpc;
+ CORE_ADDR entry_func_highpc;
+
+ /* Start (inclusive) and end (exclusive) of object file containing the
+ entry point. */
+
+ CORE_ADDR entry_file_lowpc;
+ CORE_ADDR entry_file_highpc;
+
+ /* Start (inclusive) and end (exclusive) of the user code main() function. */
+
+ CORE_ADDR main_func_lowpc;
+ CORE_ADDR main_func_highpc;
+
+/* Use these values when any of the above ranges is invalid. */
+
+/* We use these values because it guarantees that there is no number that is
+ both >= LOWPC && < HIGHPC. It is also highly unlikely that 3 is a valid
+ module or function start address (as opposed to 0). */
+
+#define INVALID_ENTRY_LOWPC (3)
+#define INVALID_ENTRY_HIGHPC (1)
+
+ };
+
+/* Sections in an objfile.
+
+ It is strange that we have both this notion of "sections"
+ and the one used by section_offsets. Section as used
+ here, (currently at least) means a BFD section, and the sections
+ are set up from the BFD sections in allocate_objfile.
+
+ The sections in section_offsets have their meaning determined by
+ the symbol format, and they are set up by the sym_offsets function
+ for that symbol file format.
- CORE_ADDR entry_point;
+ I'm not sure this could or should be changed, however. */
- /* Start (inclusive) and end (exclusive) of function containing the
- entry point. */
+struct obj_section
+ {
+ CORE_ADDR addr; /* lowest address in section */
+ CORE_ADDR endaddr; /* 1+highest address in section */
- CORE_ADDR entry_func_lowpc;
- CORE_ADDR entry_func_highpc;
+ /* This field is being used for nefarious purposes by syms_from_objfile.
+ It is said to be redundant with section_offsets; it's not really being
+ used that way, however, it's some sort of hack I don't understand
+ and am not going to try to eliminate (yet, anyway). FIXME.
- /* Start (inclusive) and end (exclusive) of object file containing the
- entry point. */
-
- CORE_ADDR entry_file_lowpc;
- CORE_ADDR entry_file_highpc;
+ It was documented as "offset between (end)addr and actual memory
+ addresses", but that's not true; addr & endaddr are actual memory
+ addresses. */
+ CORE_ADDR offset;
- /* Start (inclusive) and end (exclusive) of the user code main() function. */
+ sec_ptr the_bfd_section; /* BFD section pointer */
- CORE_ADDR main_func_lowpc;
- CORE_ADDR main_func_highpc;
+ /* Objfile this section is part of. */
+ struct objfile *objfile;
-};
+ /* True if this "overlay section" is mapped into an "overlay region". */
+ int ovly_mapped;
+ };
+/* An import entry contains information about a symbol that
+ is used in this objfile but not defined in it, and so needs
+ to be imported from some other objfile */
+/* Currently we just store the name; no attributes. 1997-08-05 */
+typedef char *ImportEntry;
-/* Master structure for keeping track of each input file from which
- gdb reads symbols. One of these is allocated for each such file we
- access, e.g. the exec_file, symbol_file, and any shared library object
- files. */
+
+/* An export entry contains information about a symbol that
+ is defined in this objfile and available for use in other
+ objfiles */
+typedef struct
+ {
+ char *name; /* name of exported symbol */
+ int address; /* offset subject to relocation */
+ /* Currently no other attributes 1997-08-05 */
+ }
+ExportEntry;
+
+
+/* The "objstats" structure provides a place for gdb to record some
+ interesting information about its internal state at runtime, on a
+ per objfile basis, such as information about the number of symbols
+ read, size of string table (if any), etc. */
+
+struct objstats
+ {
+ int n_minsyms; /* Number of minimal symbols read */
+ int n_psyms; /* Number of partial symbols read */
+ int n_syms; /* Number of full symbols read */
+ int n_stabs; /* Number of ".stabs" read (if applicable) */
+ int n_types; /* Number of types */
+ int sz_strtab; /* Size of stringtable, (if applicable) */
+ };
+
+#define OBJSTAT(objfile, expr) (objfile -> stats.expr)
+#define OBJSTATS struct objstats stats
+extern void print_objfile_statistics (void);
+extern void print_symbol_bcache_statistics (void);
+
+/* Number of entries in the minimal symbol hash table. */
+#define MINIMAL_SYMBOL_HASH_SIZE 2039
+
+/* Master structure for keeping track of each file from which
+ gdb reads symbols. There are several ways these get allocated: 1.
+ The main symbol file, symfile_objfile, set by the symbol-file command,
+ 2. Additional symbol files added by the add-symbol-file command,
+ 3. Shared library objfiles, added by ADD_SOLIB, 4. symbol files
+ for modules that were loaded when GDB attached to a remote system
+ (see remote-vx.c). */
struct objfile
-{
+ {
+
+ /* All struct objfile's are chained together by their next pointers.
+ The global variable "object_files" points to the first link in this
+ chain.
+
+ FIXME: There is a problem here if the objfile is reusable, and if
+ multiple users are to be supported. The problem is that the objfile
+ list is linked through a member of the objfile struct itself, which
+ is only valid for one gdb process. The list implementation needs to
+ be changed to something like:
+
+ struct list {struct list *next; struct objfile *objfile};
+
+ where the list structure is completely maintained separately within
+ each gdb process. */
+
+ struct objfile *next;
+
+ /* The object file's name, tilde-expanded and absolute.
+ Malloc'd; free it if you free this struct. */
+
+ char *name;
+
+ /* Some flag bits for this objfile. */
+
+ unsigned short flags;
+
+ /* Each objfile points to a linked list of symtabs derived from this file,
+ one symtab structure for each compilation unit (source file). Each link
+ in the symtab list contains a backpointer to this objfile. */
+
+ struct symtab *symtabs;
+
+ /* Each objfile points to a linked list of partial symtabs derived from
+ this file, one partial symtab structure for each compilation unit
+ (source file). */
- /* All struct objfile's are chained together by their next pointers.
- The global variable "object_files" points to the first link in this
- chain.
+ struct partial_symtab *psymtabs;
- FIXME: There is a problem here if the objfile is reusable, and if
- multiple users are to be supported. The problem is that the objfile
- list is linked through a member of the objfile struct itself, which
- is only valid for one gdb process. The list implementation needs to
- be changed to something like:
+ /* List of freed partial symtabs, available for re-use */
- struct list {struct list *next; struct objfile *objfile};
+ struct partial_symtab *free_psymtabs;
- where the list structure is completely maintained separately within
- each gdb process. */
+ /* The object file's BFD. Can be null if the objfile contains only
+ minimal symbols, e.g. the run time common symbols for SunOS4. */
- struct objfile *next;
+ bfd *obfd;
- /* The object file's name. Malloc'd; free it if you free this struct. */
+ /* The modification timestamp of the object file, as of the last time
+ we read its symbols. */
- char *name;
+ long mtime;
- /* Some flag bits for this objfile. */
+ /* Obstacks to hold objects that should be freed when we load a new symbol
+ table from this object file. */
- unsigned short flags;
+ struct obstack psymbol_obstack; /* Partial symbols */
+ struct obstack symbol_obstack; /* Full symbols */
+ struct obstack type_obstack; /* Types */
- /* Each objfile points to a linked list of symtabs derived from this file,
- one symtab structure for each compilation unit (source file). Each link
- in the symtab list contains a backpointer to this objfile. */
+ /* A byte cache where we can stash arbitrary "chunks" of bytes that
+ will not change. */
- struct symtab *symtabs;
+ struct bcache *psymbol_cache; /* Byte cache for partial syms */
+ struct bcache *macro_cache; /* Byte cache for macros */
- /* Each objfile points to a linked list of partial symtabs derived from
- this file, one partial symtab structure for each compilation unit
- (source file). */
+ /* Hash table for mapping symbol names to demangled names. Each
+ entry in the hash table is actually two consecutive strings,
+ both null-terminated; the first one is a mangled or linkage
+ name, and the second is the demangled name or just a zero byte
+ if the name doesn't demangle. */
+ struct htab *demangled_names_hash;
- struct partial_symtab *psymtabs;
+ /* Vectors of all partial symbols read in from file. The actual data
+ is stored in the psymbol_obstack. */
- /* List of freed partial symtabs, available for re-use */
+ struct psymbol_allocation_list global_psymbols;
+ struct psymbol_allocation_list static_psymbols;
- struct partial_symtab *free_psymtabs;
+ /* Each file contains a pointer to an array of minimal symbols for all
+ global symbols that are defined within the file. The array is terminated
+ by a "null symbol", one that has a NULL pointer for the name and a zero
+ value for the address. This makes it easy to walk through the array
+ when passed a pointer to somewhere in the middle of it. There is also
+ a count of the number of symbols, which does not include the terminating
+ null symbol. The array itself, as well as all the data that it points
+ to, should be allocated on the symbol_obstack for this file. */
- /* The object file's BFD. Can be null, in which case bfd_open (name) and
- put the result here. */
+ struct minimal_symbol *msymbols;
+ int minimal_symbol_count;
- bfd *obfd;
+ /* This is a hash table used to index the minimal symbols by name. */
- /* The modification timestamp of the object file, as of the last time
- we read its symbols. */
+ struct minimal_symbol *msymbol_hash[MINIMAL_SYMBOL_HASH_SIZE];
- long mtime;
+ /* This hash table is used to index the minimal symbols by their
+ demangled names. */
- /* Obstacks to hold objects that should be freed when we load a new symbol
- table from this object file. */
+ struct minimal_symbol *msymbol_demangled_hash[MINIMAL_SYMBOL_HASH_SIZE];
- struct obstack psymbol_obstack; /* Partial symbols */
- struct obstack symbol_obstack; /* Full symbols */
- struct obstack type_obstack; /* Types */
+ /* For object file formats which don't specify fundamental types, gdb
+ can create such types. For now, it maintains a vector of pointers
+ to these internally created fundamental types on a per objfile basis,
+ however it really should ultimately keep them on a per-compilation-unit
+ basis, to account for linkage-units that consist of a number of
+ compilation units that may have different fundamental types, such as
+ linking C modules with ADA modules, or linking C modules that are
+ compiled with 32-bit ints with C modules that are compiled with 64-bit
+ ints (not inherently evil with a smarter linker). */
- /* Vectors of all partial symbols read in from file. The actual data
- is stored in the psymbol_obstack. */
+ struct type **fundamental_types;
- struct psymbol_allocation_list global_psymbols;
- struct psymbol_allocation_list static_psymbols;
+ /* The mmalloc() malloc-descriptor for this objfile if we are using
+ the memory mapped malloc() package to manage storage for this objfile's
+ data. NULL if we are not. */
- /* Each file contains a pointer to an array of minimal symbols for all
- global symbols that are defined within the file. The array is terminated
- by a "null symbol", one that has a NULL pointer for the name and a zero
- value for the address. This makes it easy to walk through the array
- when passed a pointer to somewhere in the middle of it. There is also
- a count of the number of symbols, which does include the terminating
- null symbol. The array itself, as well as all the data that it points
- to, should be allocated on the symbol_obstack for this file. */
+ void *md;
- struct minimal_symbol *msymbols;
- int minimal_symbol_count;
+ /* The file descriptor that was used to obtain the mmalloc descriptor
+ for this objfile. If we call mmalloc_detach with the malloc descriptor
+ we should then close this file descriptor. */
- /* For object file formats which don't specify fundamental types, gdb
- can create such types. For now, it maintains a vector of pointers
- to these internally created fundamental types on a per objfile basis,
- however it really should ultimately keep them on a per-compilation-unit
- basis, to account for linkage-units that consist of a number of
- compilation units that may have different fundamental types, such as
- linking C modules with ADA modules, or linking C modules that are
- compiled with 32-bit ints with C modules that are compiled with 64-bit
- ints (not inherently evil with a smarter linker). */
+ int mmfd;
- struct type **fundamental_types;
+ /* Structure which keeps track of functions that manipulate objfile's
+ of the same type as this objfile. I.E. the function to read partial
+ symbols for example. Note that this structure is in statically
+ allocated memory, and is shared by all objfiles that use the
+ object module reader of this type. */
- /* The mmalloc() malloc-descriptor for this objfile if we are using
- the memory mapped malloc() package to manage storage for this objfile's
- data. NULL if we are not. */
+ struct sym_fns *sf;
- PTR md;
+ /* The per-objfile information about the entry point, the scope (file/func)
+ containing the entry point, and the scope of the user's main() func. */
- /* The file descriptor that was used to obtain the mmalloc descriptor
- for this objfile. If we call mmalloc_detach with the malloc descriptor
- we should then close this file descriptor. */
+ struct entry_info ei;
- int mmfd;
+ /* Information about stabs. Will be filled in with a dbx_symfile_info
+ struct by those readers that need it. */
- /* Structure which keeps track of functions that manipulate objfile's
- of the same type as this objfile. I.E. the function to read partial
- symbols for example. Note that this structure is in statically
- allocated memory, and is shared by all objfiles that use the
- object module reader of this type. */
+ struct dbx_symfile_info *sym_stab_info;
- struct sym_fns *sf;
+ /* Hook for information for use by the symbol reader (currently used
+ for information shared by sym_init and sym_read). It is
+ typically a pointer to malloc'd memory. The symbol reader's finish
+ function is responsible for freeing the memory thusly allocated. */
- /* The per-objfile information about the entry point, the scope (file/func)
- containing the entry point, and the scope of the user's main() func. */
+ void *sym_private;
- struct entry_info ei;
+ /* Hook for target-architecture-specific information. This must
+ point to memory allocated on one of the obstacks in this objfile,
+ so that it gets freed automatically when reading a new object
+ file. */
- /* Hook for information which is shared by sym_init and sym_read for
- this objfile. It is typically a pointer to malloc'd memory. */
+ void *obj_private;
- PTR sym_private;
+ /* Set of relocation offsets to apply to each section.
+ Currently on the psymbol_obstack (which makes no sense, but I'm
+ not sure it's harming anything).
-};
+ These offsets indicate that all symbols (including partial and
+ minimal symbols) which have been read have been relocated by this
+ much. Symbols which are yet to be read need to be relocated by
+ it. */
+
+ struct section_offsets *section_offsets;
+ int num_sections;
+
+ /* Indexes in the section_offsets array. These are initialized by the
+ *_symfile_offsets() family of functions (som_symfile_offsets,
+ xcoff_symfile_offsets, default_symfile_offsets). In theory they
+ should correspond to the section indexes used by bfd for the
+ current objfile. The exception to this for the time being is the
+ SOM version. */
+
+ int sect_index_text;
+ int sect_index_data;
+ int sect_index_bss;
+ int sect_index_rodata;
+
+ /* These pointers are used to locate the section table, which
+ among other things, is used to map pc addresses into sections.
+ SECTIONS points to the first entry in the table, and
+ SECTIONS_END points to the first location past the last entry
+ in the table. Currently the table is stored on the
+ psymbol_obstack (which makes no sense, but I'm not sure it's
+ harming anything). */
+
+ struct obj_section
+ *sections, *sections_end;
+
+ /* two auxiliary fields, used to hold the fp of separate symbol files */
+ FILE *auxf1, *auxf2;
+
+ /* Imported symbols */
+ ImportEntry *import_list;
+ int import_list_size;
+
+ /* Exported symbols */
+ ExportEntry *export_list;
+ int export_list_size;
+
+ /* Link to objfile that contains the debug symbols for this one.
+ One is loaded if this file has an debug link to an existing
+ debug file with the right checksum */
+ struct objfile *separate_debug_objfile;
+
+ /* If this is a separate debug object, this is used as a link to the
+ actual executable objfile. */
+ struct objfile *separate_debug_objfile_backlink;
+
+ /* Place to stash various statistics about this objfile */
+ OBJSTATS;
+ };
/* Defines for the objfile flag word. */
/* Gdb can arrange to allocate storage for all objects related to a
- particular objfile in a designated section of it's address space,
+ particular objfile in a designated section of its address space,
managed at a low level by mmap() and using a special version of
malloc that handles malloc/free/realloc on top of the mmap() interface.
This allows the "internal gdb state" for a particular objfile to be
#define OBJF_SYMS (1 << 1) /* Have tried to read symbols */
+/* When an object file has its functions reordered (currently Irix-5.2
+ shared libraries exhibit this behaviour), we will need an expensive
+ algorithm to locate a partial symtab or symtab via an address.
+ To avoid this penalty for normal object files, we use this flag,
+ whose setting is determined upon symbol table read in. */
+
+#define OBJF_REORDERED (1 << 2) /* Functions are reordered */
+
+/* Distinguish between an objfile for a shared library and a "vanilla"
+ objfile. (If not set, the objfile may still actually be a solib.
+ This can happen if the user created the objfile by using the
+ add-symbol-file command. GDB doesn't in that situation actually
+ check whether the file is a solib. Rather, the target's
+ implementation of the solib interface is responsible for setting
+ this flag when noticing solibs used by an inferior.) */
+
+#define OBJF_SHARED (1 << 3) /* From a shared library */
+
+/* User requested that this objfile be read in it's entirety. */
+
+#define OBJF_READNOW (1 << 4) /* Immediate full read */
+
+/* This objfile was created because the user explicitly caused it
+ (e.g., used the add-symbol-file command). This bit offers a way
+ for run_command to remove old objfile entries which are no longer
+ valid (i.e., are associated with an old inferior), but to preserve
+ ones that the user explicitly loaded via the add-symbol-file
+ command. */
+
+#define OBJF_USERLOADED (1 << 5) /* User loaded */
+
/* The object file that the main symbol table was loaded from (e.g. the
argument to the "symbol-file" or "file" command). */
extern struct objfile *symfile_objfile;
+/* The object file that contains the runtime common minimal symbols
+ for SunOS4. Note that this objfile has no associated BFD. */
+
+extern struct objfile *rt_common_objfile;
+
/* When we need to allocate a new type, we need to know which type_obstack
to allocate the type on, since there is one for each objfile. The places
where types are allocated are deeply buried in function call hierarchies
/* Declarations for functions defined in objfiles.c */
-extern struct objfile *
-allocate_objfile PARAMS ((bfd *, int));
+extern struct objfile *allocate_objfile (bfd *, int);
+
+extern int build_objfile_section_table (struct objfile *);
+
+extern void terminate_minimal_symbol_table (struct objfile *objfile);
+
+extern void put_objfile_before (struct objfile *, struct objfile *);
+
+extern void objfile_to_front (struct objfile *);
-extern void
-unlink_objfile PARAMS ((struct objfile *));
+extern void unlink_objfile (struct objfile *);
-extern void
-free_objfile PARAMS ((struct objfile *));
+extern void free_objfile (struct objfile *);
-extern void
-free_all_objfiles PARAMS ((void));
+extern struct cleanup *make_cleanup_free_objfile (struct objfile *);
-extern int
-have_partial_symbols PARAMS ((void));
+extern void free_all_objfiles (void);
-extern int
-have_full_symbols PARAMS ((void));
+extern void objfile_relocate (struct objfile *, struct section_offsets *);
+
+extern int have_partial_symbols (void);
+
+extern int have_full_symbols (void);
+
+/* This operation deletes all objfile entries that represent solibs that
+ weren't explicitly loaded by the user, via e.g., the add-symbol-file
+ command.
+ */
+extern void objfile_purge_solibs (void);
/* Functions for dealing with the minimal symbol table, really a misc
address<->symbol mapping for things we don't have debug symbols for. */
-extern int
-have_minimal_symbols PARAMS ((void));
+extern int have_minimal_symbols (void);
+
+extern struct obj_section *find_pc_section (CORE_ADDR pc);
+
+extern struct obj_section *find_pc_sect_section (CORE_ADDR pc,
+ asection * section);
+extern int in_plt_section (CORE_ADDR, char *);
+
+extern int is_in_import_list (char *, struct objfile *);
/* Traverse all object files. ALL_OBJFILES_SAFE works even if you delete
the objfile during the traversal. */
(obj) != NULL? ((nxt)=(obj)->next,1) :0; \
(obj) = (nxt))
-
/* Traverse all symtabs in one objfile. */
#define ALL_OBJFILE_SYMTABS(objfile, s) \
/* Traverse all minimal symbols in one objfile. */
#define ALL_OBJFILE_MSYMBOLS(objfile, m) \
- for ((m) = (objfile) -> msymbols; (m)->name != NULL; (m)++)
-
+ for ((m) = (objfile) -> msymbols; DEPRECATED_SYMBOL_NAME(m) != NULL; (m)++)
/* Traverse all symtabs in all objfiles. */
ALL_OBJFILES (objfile) \
ALL_OBJFILE_MSYMBOLS (objfile, m)
-#endif /* !defined (OBJFILES_H) */
+#define ALL_OBJFILE_OSECTIONS(objfile, osect) \
+ for (osect = objfile->sections; osect < objfile->sections_end; osect++)
+
+#define ALL_OBJSECTIONS(objfile, osect) \
+ ALL_OBJFILES (objfile) \
+ ALL_OBJFILE_OSECTIONS (objfile, osect)
+
+#define SECT_OFF_DATA(objfile) \
+ ((objfile->sect_index_data == -1) \
+ ? (internal_error (__FILE__, __LINE__, "sect_index_data not initialized"), -1) \
+ : objfile->sect_index_data)
+
+#define SECT_OFF_RODATA(objfile) \
+ ((objfile->sect_index_rodata == -1) \
+ ? (internal_error (__FILE__, __LINE__, "sect_index_rodata not initialized"), -1) \
+ : objfile->sect_index_rodata)
+
+#define SECT_OFF_TEXT(objfile) \
+ ((objfile->sect_index_text == -1) \
+ ? (internal_error (__FILE__, __LINE__, "sect_index_text not initialized"), -1) \
+ : objfile->sect_index_text)
+
+/* Sometimes the .bss section is missing from the objfile, so we don't
+ want to die here. Let the users of SECT_OFF_BSS deal with an
+ uninitialized section index. */
+#define SECT_OFF_BSS(objfile) (objfile)->sect_index_bss
+
+#endif /* !defined (OBJFILES_H) */
projects / deliverable / binutils-gdb.git / blobdiff