-/* Parameters for execution on a Sun, for GDB, the GNU debugger.
- Copyright (C) 1986, 1987 Free Software Foundation, Inc.
+/* Copyright (C) 1990 Free Software Foundation, Inc.
-GDB is distributed in the hope that it will be useful, but WITHOUT ANY
-WARRANTY. No author or distributor accepts responsibility to anyone
-for the consequences of using it or for whether it serves any
-particular purpose or works at all, unless he says so in writing.
-Refer to the GDB General Public License for full details.
+This file is part of GDB.
-Everyone is granted permission to copy, modify and redistribute GDB,
-but only under the conditions described in the GDB General Public
-License. A copy of this license is supposed to have been given to you
-along with GDB so you can know your rights and responsibilities. It
-should be in a file named COPYING. Among other things, the copyright
-notice and this notice must be preserved on all copies.
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
-In other words, go ahead and share GDB, but don't try to stop
-anyone else from sharing it farther. Help stamp out software hoarding!
-*/
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
-#ifndef sun3
-#define sun3
-#endif
-
-/* Get rid of any system-imposed stack limit if possible. */
-
-#define SET_STACK_LIMIT_HUGE
-
-/* Define this if the C compiler puts an underscore at the front
- of external names before giving them to the linker. */
-
-#define NAMES_HAVE_UNDERSCORE
-
-/* Debugger information will be in DBX format. */
-
-#define READ_DBX_FORMAT
-
-/* Offset from address of function to start of its code.
- Zero on most machines. */
-
-#define FUNCTION_START_OFFSET 0
-
-/* Advance PC across any function entry prologue instructions
- to reach some "real" code. */
-
-#define SKIP_PROLOGUE(pc) \
-{ register int op = read_memory_integer (pc, 2); \
- if (op == 0047126) \
- pc += 4; /* Skip link #word */ \
- else if (op == 0044016) \
- pc += 6; /* Skip link #long */ \
-}
-
-/* Immediately after a function call, return the saved pc.
- Can't go through the frames for this because on some machines
- the new frame is not set up until the new function executes
- some instructions. */
-
-#define SAVED_PC_AFTER_CALL(frame) \
-read_memory_integer (read_register (SP_REGNUM), 4)
-
-/* Address of end of stack space. */
-
-#define STACK_END_ADDR 0xf000000
-
-/* Stack grows downward. */
-
-#define INNER_THAN <
-
-/* Sequence of bytes for breakpoint instruction. */
-
-#define BREAKPOINT {0x4e, 0x4f}
-
-/* Amount PC must be decremented by after a breakpoint.
- This is often the number of bytes in BREAKPOINT
- but not always. */
-
-#define DECR_PC_AFTER_BREAK 2
-
-/* Nonzero if instruction at PC is a return instruction. */
-
-#define ABOUT_TO_RETURN(pc) (read_memory_integer (pc, 2) == 0x4e75)
-
-/* Return 1 if P points to an invalid floating point value. */
-
-#define INVALID_FLOAT(p, len) 0 /* Just a first guess; not checked */
-
-/* Say how long (ordinary) registers are. */
-
-#define REGISTER_TYPE long
-
-/* Number of machine registers */
-
-#define NUM_REGS 31
-
-/* Initializer for an array of names of registers.
- There should be NUM_REGS strings in this initializer. */
-
-#define REGISTER_NAMES \
- {"d0", "d1", "d2", "d3", "d4", "d5", "d6", "d7", \
- "a0", "a1", "a2", "a3", "a4", "a5", "fp", "sp", \
- "ps", "pc", \
- "fp0", "fp1", "fp2", "fp3", "fp4", "fp5", "fp6", "fp7", \
- "fpcontrol", "fpstatus", "fpiaddr", "fpcode", "fpflags" }
-
-/* Register numbers of various important registers.
- Note that some of these values are "real" register numbers,
- and correspond to the general registers of the machine,
- and some are "phony" register numbers which are too large
- to be actual register numbers as far as the user is concerned
- but do serve to get the desired values when passed to read_register. */
-
-#define FP_REGNUM 14 /* Contains address of executing stack frame */
-#define SP_REGNUM 15 /* Contains address of top of stack */
-#define PS_REGNUM 16 /* Contains processor status */
-#define PC_REGNUM 17 /* Contains program counter */
-#define FP0_REGNUM 18 /* Floating point register 0 */
-#define FPC_REGNUM 26 /* 68881 control register */
-
-/* Total amount of space needed to store our copies of the machine's
- register state, the array `registers'. */
-#define REGISTER_BYTES (16*4+8*12+8+20)
-
-/* Index within `registers' of the first byte of the space for
- register N. */
-
-#define REGISTER_BYTE(N) \
- ((N) >= FPC_REGNUM ? (((N) - FPC_REGNUM) * 4) + 168 \
- : (N) >= FP0_REGNUM ? (((N) - FP0_REGNUM) * 12) + 72 \
- : (N) * 4)
-
-/* Number of bytes of storage in the actual machine representation
- for register N. On the 68000, all regs are 4 bytes
- except the floating point regs which are 12 bytes. */
-
-#define REGISTER_RAW_SIZE(N) (((unsigned)(N) - FP0_REGNUM) < 8 ? 12 : 4)
-
-/* Number of bytes of storage in the program's representation
- for register N. On the 68000, all regs are 4 bytes
- except the floating point regs which are 8-byte doubles. */
-
-#define REGISTER_VIRTUAL_SIZE(N) (((unsigned)(N) - FP0_REGNUM) < 8 ? 8 : 4)
-
-/* Largest value REGISTER_RAW_SIZE can have. */
-
-#define MAX_REGISTER_RAW_SIZE 12
-
-/* Largest value REGISTER_VIRTUAL_SIZE can have. */
-
-#define MAX_REGISTER_VIRTUAL_SIZE 8
-
-/* Nonzero if register N requires conversion
- from raw format to virtual format. */
-
-#define REGISTER_CONVERTIBLE(N) (((unsigned)(N) - FP0_REGNUM) < 8)
-
-/* Convert data from raw format for register REGNUM
- to virtual format for register REGNUM. */
-
-#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,FROM,TO) \
-{ if ((REGNUM) >= FP0_REGNUM && (REGNUM) < FPC_REGNUM) \
- convert_from_68881 ((FROM), (TO)); \
- else \
- bcopy ((FROM), (TO), 4); }
-
-/* Convert data from virtual format for register REGNUM
- to raw format for register REGNUM. */
-
-#define REGISTER_CONVERT_TO_RAW(REGNUM,FROM,TO) \
-{ if ((REGNUM) >= FP0_REGNUM && (REGNUM) < FPC_REGNUM) \
- convert_to_68881 ((FROM), (TO)); \
- else \
- bcopy ((FROM), (TO), 4); }
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-/* Return the GDB type object for the "standard" data type
- of data in register N. */
+/* The standard thing is to include param.h. However, files that are
+ specific to a particular target can include that tm-xxx.h file and
+ param-no-tm.h. Any future inclusions of param.h will be protected
+ against by the #if !defined stuff below. */
-#define REGISTER_VIRTUAL_TYPE(N) \
- (((unsigned)(N) - FP0_REGNUM) < 8 ? builtin_type_double : builtin_type_int)
+/* This file requires defs.h. */
-/* Extract from an array REGBUF containing the (raw) register state
- a function return value of type TYPE, and copy that, in virtual format,
- into VALBUF. */
-
-#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
- bcopy (REGBUF, VALBUF, TYPE_LENGTH (TYPE))
-
-/* Write into appropriate registers a function return value
- of type TYPE, given in virtual format. */
-
-#define STORE_RETURN_VALUE(TYPE,VALBUF) \
- write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE))
-
-/* Extract from an array REGBUF containing the (raw) register state
- the address in which a function should return its structure value,
- as a CORE_ADDR (or an expression that can be used as one). */
-
-#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(int *)(REGBUF))
-
-/* Enable use of alternate code to read and write registers. */
-
-#define NEW_SUN_PTRACE
-
-/* Enable use of alternate code for Sun's format of core dump file. */
-
-#define NEW_SUN_CORE
-
-/* Do implement the attach and detach commands. */
-
-#define ATTACH_DETACH
-
-/* It is safe to look for symsegs on a Sun, because Sun's ld
- does not screw up with random garbage at end of file. */
-
-#define READ_GDB_SYMSEGS
-\f
-/* Describe the pointer in each stack frame to the previous stack frame
- (its caller). */
-
-/* FRAME_CHAIN takes a frame's nominal address
- and produces the frame's chain-pointer.
-
- FRAME_CHAIN_COMBINE takes the chain pointer and the frame's nominal address
- and produces the nominal address of the caller frame.
-
- However, if FRAME_CHAIN_VALID returns zero,
- it means the given frame is the outermost one and has no caller.
- In that case, FRAME_CHAIN_COMBINE is not used. */
-
-/* In the case of the Sun, the frame's nominal address
- is the address of a 4-byte word containing the calling frame's address. */
-
-#define FRAME_CHAIN(thisframe) (read_memory_integer (thisframe, 4))
-
-#define FRAME_CHAIN_VALID(chain, thisframe) \
- (chain != 0 && (FRAME_SAVED_PC (thisframe) >= first_object_file_end))
-
-#define FRAME_CHAIN_COMBINE(chain, thisframe) (chain)
-
-/* Define other aspects of the stack frame. */
-
-#define FRAME_SAVED_PC(frame) (read_memory_integer (frame + 4, 4))
-
-#define FRAME_ARGS_ADDRESS(fi) (fi.frame)
-
-#define FRAME_LOCALS_ADDRESS(fi) (fi.frame)
-
-/* Set VAL to the number of args passed to frame described by FI.
- Can set VAL to -1, meaning no way to tell. */
-
-/* We can't tell how many args there are
- now that the C compiler delays popping them. */
-#define FRAME_NUM_ARGS(val,fi) (val = -1)
-
-#if 0
-#define FRAME_NUM_ARGS(val, fi) \
-{ register CORE_ADDR pc = FRAME_SAVED_PC (fi.frame); \
- register int insn = 0177777 & read_memory_integer (pc, 2); \
- val = 0; \
- if (insn == 0047757 || insn == 0157374) /* lea W(sp),sp or addaw #W,sp */ \
- val = read_memory_integer (pc + 2, 2); \
- else if ((insn & 0170777) == 0050217 /* addql #N, sp */ \
- || (insn & 0170777) == 0050117) /* addqw */ \
- { val = (insn >> 9) & 7; if (val == 0) val = 8; } \
- else if (insn == 0157774) /* addal #WW, sp */ \
- val = read_memory_integer (pc + 2, 4); \
- val >>= 2; }
+#if !defined (PARAM_H)
+#include "tm.h"
#endif
-/* Return number of bytes at start of arglist that are not really args. */
-
-#define FRAME_ARGS_SKIP 8
-
-/* Put here the code to store, into a struct frame_saved_regs,
- the addresses of the saved registers of frame described by FRAME_INFO.
- This includes special registers such as pc and fp saved in special
- ways in the stack frame. sp is even more special:
- the address we return for it IS the sp for the next frame. */
-
-#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \
-{ register int regnum; \
- register int regmask; \
- register CORE_ADDR next_addr; \
- register CORE_ADDR pc; \
- int nextinsn; \
- bzero (&frame_saved_regs, sizeof frame_saved_regs); \
- if ((frame_info).pc >= (frame_info).frame - CALL_DUMMY_LENGTH - FP_REGNUM*4 - 8*12 - 4 \
- && (frame_info).pc <= (frame_info).frame) \
- { next_addr = (frame_info).frame; \
- pc = (frame_info).frame - CALL_DUMMY_LENGTH - FP_REGNUM * 4 - 8*12 - 4; }\
- else \
- { pc = get_pc_function_start ((frame_info).pc); \
- /* Verify we have a link a6 instruction next; \
- if not we lose. If we win, find the address above the saved \
- regs using the amount of storage from the link instruction. */\
- if (044016 == read_memory_integer (pc, 2)) \
- next_addr = (frame_info).frame + read_memory_integer (pc += 2, 4), pc+=4; \
- else if (047126 == read_memory_integer (pc, 2)) \
- next_addr = (frame_info).frame + read_memory_integer (pc += 2, 2), pc+=2; \
- else goto lose; \
- /* If have an addal #-n, sp next, adjust next_addr. */ \
- if ((0177777 & read_memory_integer (pc, 2)) == 0157774) \
- next_addr += read_memory_integer (pc += 2, 4), pc += 4; \
- } \
- /* next should be a moveml to (sp) or -(sp) or a movl r,-(sp) */ \
- regmask = read_memory_integer (pc + 2, 2); \
- /* But before that can come an fmovem. Check for it. */ \
- nextinsn = 0xffff & read_memory_integer (pc, 2); \
- if (0xf227 == nextinsn \
- && (regmask & 0xff00) == 0xe000) \
- { pc += 4; /* Regmask's low bit is for register fp7, the first pushed */ \
- for (regnum = FP0_REGNUM + 7; regnum >= FP0_REGNUM; regnum--, regmask >>= 1) \
- if (regmask & 1) \
- (frame_saved_regs).regs[regnum] = (next_addr -= 12); \
- regmask = read_memory_integer (pc + 2, 2); } \
- if (0044327 == read_memory_integer (pc, 2)) \
- { pc += 4; /* Regmask's low bit is for register 0, the first written */ \
- for (regnum = 0; regnum < 16; regnum++, regmask >>= 1) \
- if (regmask & 1) \
- (frame_saved_regs).regs[regnum] = (next_addr += 4) - 4; } \
- else if (0044347 == read_memory_integer (pc, 2)) \
- { pc += 4; /* Regmask's low bit is for register 15, the first pushed */ \
- for (regnum = 15; regnum >= 0; regnum--, regmask >>= 1) \
- if (regmask & 1) \
- (frame_saved_regs).regs[regnum] = (next_addr -= 4); } \
- else if (0x2f00 == 0xfff0 & read_memory_integer (pc, 2)) \
- { regnum = 0xf & read_memory_integer (pc, 2); pc += 2; \
- (frame_saved_regs).regs[regnum] = (next_addr -= 4); } \
- /* fmovemx to index of sp may follow. */ \
- regmask = read_memory_integer (pc + 2, 2); \
- nextinsn = 0xffff & read_memory_integer (pc, 2); \
- if (0xf236 == nextinsn \
- && (regmask & 0xff00) == 0xf000) \
- { pc += 10; /* Regmask's low bit is for register fp0, the first written */ \
- for (regnum = FP0_REGNUM + 7; regnum >= FP0_REGNUM; regnum--, regmask >>= 1) \
- if (regmask & 1) \
- (frame_saved_regs).regs[regnum] = (next_addr += 12) - 12; \
- regmask = read_memory_integer (pc + 2, 2); } \
- /* clrw -(sp); movw ccr,-(sp) may follow. */ \
- if (0x426742e7 == read_memory_integer (pc, 4)) \
- (frame_saved_regs).regs[PS_REGNUM] = (next_addr -= 4); \
- lose: ; \
- (frame_saved_regs).regs[SP_REGNUM] = (frame_info).frame + 8; \
- (frame_saved_regs).regs[FP_REGNUM] = (frame_info).frame; \
- (frame_saved_regs).regs[PC_REGNUM] = (frame_info).frame + 4; \
-}
-\f
-/* Things needed for making the inferior call functions. */
-
-/* Push an empty stack frame, to record the current PC, etc. */
-
-#define PUSH_DUMMY_FRAME \
-{ register CORE_ADDR sp = read_register (SP_REGNUM); \
- register int regnum; \
- char raw_buffer[12]; \
- sp = push_word (sp, read_register (PC_REGNUM)); \
- sp = push_word (sp, read_register (FP_REGNUM)); \
- write_register (FP_REGNUM, sp); \
- for (regnum = FP0_REGNUM + 7; regnum >= FP0_REGNUM; regnum--) \
- { read_register_bytes (REGISTER_BYTE (regnum), raw_buffer, 12); \
- sp = push_bytes (sp, raw_buffer, 12); } \
- for (regnum = FP_REGNUM - 1; regnum >= 0; regnum--) \
- sp = push_word (sp, read_register (regnum)); \
- sp = push_word (sp, read_register (PS_REGNUM)); \
- write_register (SP_REGNUM, sp); }
-
-/* Discard from the stack the innermost frame,
- restoring all saved registers. */
-
-#define POP_FRAME \
-{ register CORE_ADDR fp = read_register (FP_REGNUM); \
- register int regnum; \
- struct frame_saved_regs fsr; \
- struct frame_info fi; \
- char raw_buffer[12]; \
- fi = get_frame_info (fp); \
- get_frame_saved_regs (&fi, &fsr); \
- for (regnum = FP0_REGNUM + 7; regnum >= FP0_REGNUM; regnum--) \
- if (fsr.regs[regnum]) \
- { read_memory (fsr.regs[regnum], raw_buffer, 12); \
- write_register_bytes (REGISTER_BYTE (regnum), raw_buffer, 12); }\
- for (regnum = FP_REGNUM - 1; regnum >= 0; regnum--) \
- if (fsr.regs[regnum]) \
- write_register (regnum, read_memory_integer (fsr.regs[regnum], 4)); \
- if (fsr.regs[PS_REGNUM]) \
- write_register (PS_REGNUM, read_memory_integer (fsr.regs[PS_REGNUM], 4)); \
- write_register (FP_REGNUM, read_memory_integer (fp, 4)); \
- write_register (PC_REGNUM, read_memory_integer (fp + 4, 4)); \
- write_register (SP_REGNUM, fp + 8); \
- set_current_frame (read_register (FP_REGNUM)); }
-
-/* This sequence of words is the instructions
- fmovem 0xff,-(sp)
- moveml 0xfffc,-(sp)
- clrw -(sp)
- movew ccr,-(sp)
- /..* The arguments are pushed at this point by GDB;
- no code is needed in the dummy for this.
- The CALL_DUMMY_START_OFFSET gives the position of
- the following jsr instruction. *../
- jsr @#32323232
- addl #69696969,sp
- trap #15
- nop
-Note this is 28 bytes.
-We actually start executing at the jsr, since the pushing of the
-registers is done by PUSH_DUMMY_FRAME. If this were real code,
-the arguments for the function called by the jsr would be pushed
-between the moveml and the jsr, and we could allow it to execute through.
-But the arguments have to be pushed by GDB after the PUSH_DUMMY_FRAME is done,
-and we cannot allow the moveml to push the registers again lest they be
-taken for the arguments. */
-
-#define CALL_DUMMY {0xf227e0ff, 0x48e7fffc, 0x426742e7, 0x4eb93232, 0x3232dffc, 0x69696969, 0x4e4f4e71}
-
-#define CALL_DUMMY_LENGTH 28
-
-#define CALL_DUMMY_START_OFFSET 12
-
-/* Insert the specified number of args and function address
- into a call sequence of the above form stored at DUMMYNAME. */
-
-#define FIX_CALL_DUMMY(dummyname, fun, nargs) \
-{ *(int *)((char *) dummyname + 20) = nargs * 4; \
- *(int *)((char *) dummyname + 14) = fun; }
-\f
-/* Interface definitions for kernel debugger KDB. */
-
-/* Map machine fault codes into signal numbers.
- First subtract 0, divide by 4, then index in a table.
- Faults for which the entry in this table is 0
- are not handled by KDB; the program's own trap handler
- gets to handle then. */
-
-#define FAULT_CODE_ORIGIN 0
-#define FAULT_CODE_UNITS 4
-#define FAULT_TABLE \
-{ 0, 0, 0, 0, SIGTRAP, 0, 0, 0, \
- 0, SIGTRAP, 0, 0, 0, 0, 0, SIGKILL, \
- 0, 0, 0, 0, 0, 0, 0, 0, \
- SIGILL }
-
-/* Start running with a stack stretching from BEG to END.
- BEG and END should be symbols meaningful to the assembler.
- This is used only for kdb. */
-
-#define INIT_STACK(beg, end) \
-{ asm (".globl end"); \
- asm ("movel #end, sp"); \
- asm ("movel #0,a6"); }
-
-/* Push the frame pointer register on the stack. */
-#define PUSH_FRAME_PTR \
- asm ("movel a6,sp@-");
-
-/* Copy the top-of-stack to the frame pointer register. */
-#define POP_FRAME_PTR \
- asm ("movl sp@,a6");
-
-/* After KDB is entered by a fault, push all registers
- that GDB thinks about (all NUM_REGS of them),
- so that they appear in order of ascending GDB register number.
- The fault code will be on the stack beyond the last register. */
-
-#define PUSH_REGISTERS \
-{ asm ("clrw -(sp)"); \
- asm ("pea sp@(10)"); \
- asm ("movem #0xfffe,sp@-"); }
-
-/* Assuming the registers (including processor status) have been
- pushed on the stack in order of ascending GDB register number,
- restore them and return to the address in the saved PC register. */
+#include "param-no-tm.h"
-#define POP_REGISTERS \
-{ asm ("subil #8,sp@(28)"); \
- asm ("movem sp@,#0xffff"); \
- asm ("rte"); }
+#define PARAM_H 1
projects / deliverable / binutils-gdb.git / blobdiff