#include "inferior.h"
#include "gdbcore.h"
#include "regcache.h"
+#include "gdb_assert.h"
#include <sys/types.h>
#include <sys/param.h>
#define PTRACE_SETVRREGS 19
#endif
+
+/* Similarly for the ptrace requests for getting / setting the SPE
+ registers (ev0 -- ev31, acc, and spefscr). See the description of
+ gdb_evrregset_t for details. */
+#ifndef PTRACE_GETEVRREGS
+#define PTRACE_GETEVRREGS 20
+#define PTRACE_SETEVRREGS 21
+#endif
+
+
/* This oddity is because the Linux kernel defines elf_vrregset_t as
an array of 33 16 bytes long elements. I.e. it leaves out vrsave.
However the PTRACE_GETVRREGS and PTRACE_SETVRREGS requests return
typedef char gdb_vrregset_t[SIZEOF_VRREGS];
-/* For runtime check of ptrace support for VRREGS. */
+
+/* On PPC processors that support the the Signal Processing Extension
+ (SPE) APU, the general-purpose registers are 64 bits long.
+ However, the ordinary Linux kernel PTRACE_PEEKUSR / PTRACE_POKEUSR
+ / PT_READ_U / PT_WRITE_U ptrace calls only access the lower half of
+ each register, to allow them to behave the same way they do on
+ non-SPE systems. There's a separate pair of calls,
+ PTRACE_GETEVRREGS / PTRACE_SETEVRREGS, that read and write the top
+ halves of all the general-purpose registers at once, along with
+ some SPE-specific registers.
+
+ GDB itself continues to claim the general-purpose registers are 32
+ bits long; the full 64-bit registers are called 'ev0' -- 'ev31'.
+ The ev registers are raw registers, and the GPR's are pseudo-
+ registers mapped onto their lower halves. This means that reading
+ and writing ev registers involves a mix of regset-at-once
+ PTRACE_{GET,SET}EVRREGS calls and register-at-a-time
+ PTRACE_{PEEK,POKE}USR calls.
+
+ This is the structure filled in by PTRACE_GETEVRREGS and written to
+ the inferior's registers by PTRACE_SETEVRREGS. */
+struct gdb_evrregset_t
+{
+ unsigned long evr[32];
+ unsigned long long acc;
+ unsigned long spefscr;
+};
+
+
+/* Non-zero if our kernel may support the PTRACE_GETVRREGS and
+ PTRACE_SETVRREGS requests, for reading and writing the Altivec
+ registers. Zero if we've tried one of them and gotten an
+ error. */
int have_ptrace_getvrregs = 1;
+
+/* Non-zero if our kernel may support the PTRACE_GETEVRREGS and
+ PTRACE_SETEVRREGS requests, for reading and writing the SPE
+ registers. Zero if we've tried one of them and gotten an
+ error. */
+int have_ptrace_getsetevrregs = 1;
+
+
int
kernel_u_size (void)
{
/* Floating point regs: eight bytes each in both 32- and 64-bit
ptrace interfaces. Thus, two slots each in 32-bit interface, one
slot each in 64-bit interface. */
- if (regno >= tdep->ppc_fp0_regnum
+ if (tdep->ppc_fp0_regnum >= 0
+ && regno >= tdep->ppc_fp0_regnum
&& regno < tdep->ppc_fp0_regnum + ppc_num_fprs)
u_addr = (PT_FPR0 * wordsize) + ((regno - tdep->ppc_fp0_regnum) * 8);
#endif
if (regno == tdep->ppc_ps_regnum)
u_addr = PT_MSR * wordsize;
- if (regno == tdep->ppc_fpscr_regnum)
+ if (tdep->ppc_fpscr_regnum >= 0
+ && regno == tdep->ppc_fpscr_regnum)
u_addr = PT_FPSCR * wordsize;
return u_addr;
regs + (regno - tdep->ppc_vr0_regnum) * vrregsize + offset);
}
+/* Fetch the top 32 bits of TID's general-purpose registers and the
+ SPE-specific registers, and place the results in EVRREGSET. If we
+ don't support PTRACE_GETEVRREGS, then just fill EVRREGSET with
+ zeros.
+
+ All the logic to deal with whether or not the PTRACE_GETEVRREGS and
+ PTRACE_SETEVRREGS requests are supported is isolated here, and in
+ set_spe_registers. */
+static void
+get_spe_registers (int tid, struct gdb_evrregset_t *evrregset)
+{
+ if (have_ptrace_getsetevrregs)
+ {
+ if (ptrace (PTRACE_GETEVRREGS, tid, 0, evrregset) >= 0)
+ return;
+ else
+ {
+ /* EIO means that the PTRACE_GETEVRREGS request isn't supported;
+ we just return zeros. */
+ if (errno == EIO)
+ have_ptrace_getsetevrregs = 0;
+ else
+ /* Anything else needs to be reported. */
+ perror_with_name ("Unable to fetch SPE registers");
+ }
+ }
+
+ memset (evrregset, 0, sizeof (*evrregset));
+}
+
+/* Assuming TID refers to an SPE process, store the full 64-bit value
+ of TID's ev register EV_REGNUM in DEST, getting the high bits from
+ EVRREGS and the low bits from the kernel via ptrace. */
+static void
+read_spliced_spe_reg (int tid, int ev_regnum,
+ struct gdb_evrregset_t *evrregs,
+ char *dest)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+
+ /* Make sure we're trying to read an EV register; that's all we
+ handle. */
+ gdb_assert (tdep->ppc_ev0_regnum <= ev_regnum
+ && ev_regnum <= tdep->ppc_ev31_regnum);
+
+ /* Make sure the sizes for the splicing add up. */
+ gdb_assert (sizeof (evrregs->evr[0]) + sizeof (PTRACE_XFER_TYPE)
+ == register_size (current_gdbarch, ev_regnum));
+
+ {
+ /* The index of ev_regnum in evrregs->evr[]. */
+ int ev_index = ev_regnum - tdep->ppc_ev0_regnum;
+
+ /* The number of the corresponding general-purpose register, which
+ holds the lower 32 bits of the EV register. */
+ int gpr_regnum = tdep->ppc_gp0_regnum + ev_index;
+
+ /* The offset of gpr_regnum in the process's uarea. */
+ CORE_ADDR gpr_uoffset = ppc_register_u_addr (gpr_regnum);
+
+ /* The low word of the EV register's value. */
+ PTRACE_XFER_TYPE low_word;
+
+ /* The PTRACE_PEEKUSR / PT_READ_U ptrace requests need to be able
+ to return arbitrary register values, so they can't return -1 to
+ indicate an error. So we clear errno, and then check it after
+ the call. */
+ errno = 0;
+ low_word = ptrace (PT_READ_U, tid, (PTRACE_ARG3_TYPE) gpr_uoffset, 0);
+
+ if (errno != 0)
+ {
+ char message[128];
+ sprintf (message, "reading register %s (#%d)",
+ REGISTER_NAME (ev_regnum), ev_regnum);
+ perror_with_name (message);
+ }
+
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ {
+ memcpy (dest, &evrregs->evr[ev_index],
+ sizeof (evrregs->evr[ev_index]));
+ * (PTRACE_XFER_TYPE *) (dest + sizeof (evrregs->evr[ev_index]))
+ = low_word;
+ }
+ else if (TARGET_BYTE_ORDER == BFD_ENDIAN_LITTLE)
+ {
+ * (PTRACE_XFER_TYPE *) dest = low_word;
+ memcpy (dest + sizeof (PTRACE_XFER_TYPE),
+ &evrregs->evr[ev_index], sizeof (evrregs->evr[ev_index]));
+ }
+ else
+ gdb_assert (0);
+ }
+}
+
+
+/* On SPE machines, supply the full value of the SPE register REGNO
+ from TID. This handles ev0 -- ev31 and acc, which are 64 bits
+ long, and spefscr, which is 32 bits long. */
+static void
+fetch_spe_register (int tid, int regno)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ struct gdb_evrregset_t evrregs;
+
+ get_spe_registers (tid, &evrregs);
+
+ if (tdep->ppc_ev0_regnum <= regno
+ && regno <= tdep->ppc_ev31_regnum)
+ {
+ char buf[MAX_REGISTER_SIZE];
+ read_spliced_spe_reg (tid, regno, &evrregs, buf);
+ supply_register (regno, buf);
+ }
+ else if (regno == tdep->ppc_acc_regnum)
+ {
+ gdb_assert (sizeof (evrregs.acc)
+ == register_size (current_gdbarch, regno));
+ supply_register (regno, &evrregs.acc);
+ }
+ else if (regno == tdep->ppc_spefscr_regnum)
+ {
+ gdb_assert (sizeof (evrregs.spefscr)
+ == register_size (current_gdbarch, regno));
+ supply_register (regno, &evrregs.spefscr);
+ }
+ else
+ gdb_assert (0);
+}
+
static void
fetch_register (int tid, int regno)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
/* This isn't really an address. But ptrace thinks of it as one. */
- char mess[128]; /* For messages */
- int i;
+ CORE_ADDR regaddr = ppc_register_u_addr (regno);
+ int bytes_transferred;
unsigned int offset; /* Offset of registers within the u area. */
char buf[MAX_REGISTER_SIZE];
- CORE_ADDR regaddr = ppc_register_u_addr (regno);
+
+ /* Sanity check: this function should only be called to fetch raw
+ registers' values, never pseudoregisters' values. */
+ if (tdep->ppc_gp0_regnum <= regno
+ && regno < tdep->ppc_gp0_regnum + ppc_num_gprs)
+ gdb_assert (! tdep->ppc_gprs_pseudo_p);
if (altivec_register_p (regno))
{
AltiVec registers, fall through and return zeroes, because
regaddr will be -1 in this case. */
}
+ else if (spe_register_p (regno))
+ {
+ fetch_spe_register (tid, regno);
+ return;
+ }
if (regaddr == -1)
{
/* Read the raw register using PTRACE_XFER_TYPE sized chunks. On a
32-bit platform, 64-bit floating-point registers will require two
transfers. */
- for (i = 0; i < DEPRECATED_REGISTER_RAW_SIZE (regno); i += sizeof (PTRACE_XFER_TYPE))
+ for (bytes_transferred = 0;
+ bytes_transferred < register_size (current_gdbarch, regno);
+ bytes_transferred += sizeof (PTRACE_XFER_TYPE))
{
errno = 0;
- *(PTRACE_XFER_TYPE *) & buf[i] = ptrace (PT_READ_U, tid,
- (PTRACE_ARG3_TYPE) regaddr, 0);
+ *(PTRACE_XFER_TYPE *) & buf[bytes_transferred]
+ = ptrace (PT_READ_U, tid, (PTRACE_ARG3_TYPE) regaddr, 0);
regaddr += sizeof (PTRACE_XFER_TYPE);
if (errno != 0)
{
- sprintf (mess, "reading register %s (#%d)",
+ char message[128];
+ sprintf (message, "reading register %s (#%d)",
REGISTER_NAME (regno), regno);
- perror_with_name (mess);
+ perror_with_name (message);
}
}
- /* Now supply the register. Be careful to map between ptrace's and
- the current_regcache's idea of the current wordsize. */
- if ((regno >= tdep->ppc_fp0_regnum
- && regno < tdep->ppc_fp0_regnum + ppc_num_fprs)
- || gdbarch_byte_order (current_gdbarch) == BFD_ENDIAN_LITTLE)
- /* FPs are always 64 bits. Little endian values are always found
- at the left-hand end of the register. */
- regcache_raw_supply (current_regcache, regno, buf);
- else
- /* Big endian register, need to fetch the right-hand end. */
- regcache_raw_supply (current_regcache, regno,
- (buf + sizeof (PTRACE_XFER_TYPE)
- - register_size (current_gdbarch, regno)));
+ /* Now supply the register. Keep in mind that the regcache's idea
+ of the register's size may not be a multiple of sizeof
+ (PTRACE_XFER_TYPE). */
+ if (gdbarch_byte_order (current_gdbarch) == BFD_ENDIAN_LITTLE)
+ {
+ /* Little-endian values are always found at the left end of the
+ bytes transferred. */
+ regcache_raw_supply (current_regcache, regno, buf);
+ }
+ else if (gdbarch_byte_order (current_gdbarch) == BFD_ENDIAN_BIG)
+ {
+ /* Big-endian values are found at the right end of the bytes
+ transferred. */
+ size_t padding = (bytes_transferred
+ - register_size (current_gdbarch, regno));
+ regcache_raw_supply (current_regcache, regno, buf + padding);
+ }
+ else
+ gdb_assert (0);
}
static void
supply_vrregset (®s);
}
+/* On SPE machines, fetch the full 64 bits of all the general-purpose
+ registers, as well as the SPE-specific registers 'acc' and
+ 'spefscr'. */
+static void
+fetch_spe_registers (int tid)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ struct gdb_evrregset_t evrregs;
+ int i;
+
+ get_spe_registers (tid, &evrregs);
+
+ /* Splice and supply each of the EV registers. */
+ for (i = 0; i < ppc_num_gprs; i++)
+ {
+ char buf[MAX_REGISTER_SIZE];
+
+ read_spliced_spe_reg (tid, tdep->ppc_ev0_regnum + i, &evrregs, buf);
+ supply_register (tdep->ppc_ev0_regnum + i, buf);
+ }
+
+ /* Supply the SPE-specific registers. */
+ supply_register (tdep->ppc_acc_regnum, &evrregs.acc);
+ supply_register (tdep->ppc_spefscr_regnum, &evrregs.spefscr);
+}
+
static void
fetch_ppc_registers (int tid)
{
int i;
struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
- for (i = 0; i < ppc_num_gprs; i++)
- fetch_register (tid, tdep->ppc_gp0_regnum + i);
+ if (! tdep->ppc_gprs_pseudo_p)
+ for (i = 0; i < ppc_num_gprs; i++)
+ fetch_register (tid, tdep->ppc_gp0_regnum + i);
if (tdep->ppc_fp0_regnum >= 0)
for (i = 0; i < ppc_num_fprs; i++)
fetch_register (tid, tdep->ppc_fp0_regnum + i);
if (have_ptrace_getvrregs)
if (tdep->ppc_vr0_regnum != -1 && tdep->ppc_vrsave_regnum != -1)
fetch_altivec_registers (tid);
+ if (tdep->ppc_ev0_regnum >= 0)
+ fetch_spe_registers (tid);
}
/* Fetch registers from the child process. Fetch all registers if
perror_with_name ("Unable to store AltiVec register");
}
+/* Assuming TID referrs to an SPE process, set the top halves of TID's
+ general-purpose registers and its SPE-specific registers to the
+ values in EVRREGSET. If we don't support PTRACE_SETEVRREGS, do
+ nothing.
+
+ All the logic to deal with whether or not the PTRACE_GETEVRREGS and
+ PTRACE_SETEVRREGS requests are supported is isolated here, and in
+ get_spe_registers. */
+static void
+set_spe_registers (int tid, struct gdb_evrregset_t *evrregset)
+{
+ if (have_ptrace_getsetevrregs)
+ {
+ if (ptrace (PTRACE_SETEVRREGS, tid, 0, evrregset) >= 0)
+ return;
+ else
+ {
+ /* EIO means that the PTRACE_SETEVRREGS request isn't
+ supported; we fail silently, and don't try the call
+ again. */
+ if (errno == EIO)
+ have_ptrace_getsetevrregs = 0;
+ else
+ /* Anything else needs to be reported. */
+ perror_with_name ("Unable to set SPE registers");
+ }
+ }
+}
+
+/* Store the bytes at SRC as the contents of TID's EV register EV_REGNUM.
+ Write the less significant word to TID using ptrace, and copy the
+ more significant word to the appropriate slot in EVRREGS. */
+static void
+write_spliced_spe_reg (int tid, int ev_regnum,
+ struct gdb_evrregset_t *evrregs,
+ char *src)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+
+ /* Make sure we're trying to write an EV register; that's all we
+ handle. */
+ gdb_assert (tdep->ppc_ev0_regnum <= ev_regnum
+ && ev_regnum <= tdep->ppc_ev31_regnum);
+
+ /* Make sure the sizes for the splicing add up. */
+ gdb_assert (sizeof (evrregs->evr[0]) + sizeof (PTRACE_XFER_TYPE)
+ == register_size (current_gdbarch, ev_regnum));
+
+ {
+ int ev_index = ev_regnum - tdep->ppc_ev0_regnum;
+
+ /* The number of the corresponding general-purpose register, which
+ holds the lower 32 bits of the EV register. */
+ int gpr_regnum = tdep->ppc_gp0_regnum + ev_index;
+
+ /* The offset of gpr_regnum in the process's uarea. */
+ CORE_ADDR gpr_uoffset = ppc_register_u_addr (gpr_regnum);
+
+ /* The PTRACE_POKEUSR / PT_WRITE_U ptrace requests need to be able
+ to return arbitrary register values, so they can't return -1 to
+ indicate an error. So we clear errno, and check it again
+ afterwards. */
+ errno = 0;
+
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ {
+ memcpy (&evrregs->evr[ev_index], src, sizeof (evrregs->evr[ev_index]));
+ ptrace (PT_WRITE_U, tid, (PTRACE_ARG3_TYPE) gpr_uoffset,
+ * (PTRACE_XFER_TYPE *) (src + sizeof (evrregs->evr[0])));
+ }
+ else if (TARGET_BYTE_ORDER == BFD_ENDIAN_LITTLE)
+ {
+ ptrace (PT_WRITE_U, tid, (PTRACE_ARG3_TYPE) gpr_uoffset,
+ * (PTRACE_XFER_TYPE *) src);
+ memcpy (&evrregs->evr[ev_index], src + sizeof (PTRACE_XFER_TYPE),
+ sizeof (evrregs->evr[ev_index]));
+ }
+ else
+ gdb_assert (0);
+
+ if (errno != 0)
+ {
+ char message[128];
+ sprintf (message, "writing register %s (#%d)",
+ REGISTER_NAME (ev_regnum), ev_regnum);
+ perror_with_name (message);
+ }
+ }
+}
+
+/* Write GDB's value for the SPE register REGNO to TID. */
+static void
+store_spe_register (int tid, int regno)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ struct gdb_evrregset_t evrregs;
+
+ /* We can only read and write the entire EVR register set at a time,
+ so to write just a single register, we do a read-modify-write
+ maneuver. */
+ get_spe_registers (tid, &evrregs);
+
+ if (tdep->ppc_ev0_regnum >= 0
+ && tdep->ppc_ev0_regnum <= regno && regno <= tdep->ppc_ev31_regnum)
+ {
+ char buf[MAX_REGISTER_SIZE];
+ regcache_collect (regno, buf);
+ write_spliced_spe_reg (tid, regno, &evrregs, buf);
+ }
+ else if (tdep->ppc_acc_regnum >= 0
+ && regno == tdep->ppc_acc_regnum)
+ {
+ gdb_assert (sizeof (evrregs.acc)
+ == register_size (current_gdbarch, regno));
+ regcache_collect (regno, &evrregs.acc);
+ }
+ else if (tdep->ppc_spefscr_regnum >= 0
+ && regno == tdep->ppc_spefscr_regnum)
+ {
+ gdb_assert (sizeof (evrregs.spefscr)
+ == register_size (current_gdbarch, regno));
+ regcache_collect (regno, &evrregs.spefscr);
+ }
+ else
+ gdb_assert (0);
+
+ /* Write back the modified register set. */
+ set_spe_registers (tid, &evrregs);
+}
+
static void
store_register (int tid, int regno)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
/* This isn't really an address. But ptrace thinks of it as one. */
CORE_ADDR regaddr = ppc_register_u_addr (regno);
- char mess[128]; /* For messages */
int i;
- unsigned int offset; /* Offset of registers within the u area. */
+ size_t bytes_to_transfer;
char buf[MAX_REGISTER_SIZE];
+ /* Sanity check: this function should only be called to store raw
+ registers' values, never pseudoregisters' values. */
+ if (tdep->ppc_gp0_regnum <= regno
+ && regno < tdep->ppc_gp0_regnum + ppc_num_gprs)
+ gdb_assert (! tdep->ppc_gprs_pseudo_p);
+
if (altivec_register_p (regno))
{
store_altivec_register (tid, regno);
return;
}
+ else if (spe_register_p (regno))
+ {
+ store_spe_register (tid, regno);
+ return;
+ }
if (regaddr == -1)
return;
- /* First collect the register value from the regcache. Be careful
- to to convert the regcache's wordsize into ptrace's wordsize. */
+ /* First collect the register. Keep in mind that the regcache's
+ idea of the register's size may not be a multiple of sizeof
+ (PTRACE_XFER_TYPE). */
memset (buf, 0, sizeof buf);
- if ((regno >= tdep->ppc_fp0_regnum
- && regno < tdep->ppc_fp0_regnum + ppc_num_fprs)
- || TARGET_BYTE_ORDER == BFD_ENDIAN_LITTLE)
- /* Floats are always 64-bit. Little endian registers are always
- at the left-hand end of the register cache. */
- regcache_raw_collect (current_regcache, regno, buf);
- else
- /* Big-endian registers belong at the right-hand end of the
- buffer. */
- regcache_raw_collect (current_regcache, regno,
- (buf + sizeof (PTRACE_XFER_TYPE)
- - register_size (current_gdbarch, regno)));
+ bytes_to_transfer = align_up (register_size (current_gdbarch, regno),
+ sizeof (PTRACE_XFER_TYPE));
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_LITTLE)
+ {
+ /* Little-endian values always sit at the left end of the buffer. */
+ regcache_raw_collect (current_regcache, regno, buf);
+ }
+ else if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ {
+ /* Big-endian values sit at the right end of the buffer. */
+ size_t padding = (bytes_to_transfer
+ - register_size (current_gdbarch, regno));
+ regcache_raw_collect (current_regcache, regno, buf + padding);
+ }
- for (i = 0; i < DEPRECATED_REGISTER_RAW_SIZE (regno); i += sizeof (PTRACE_XFER_TYPE))
+ for (i = 0; i < bytes_to_transfer; i += sizeof (PTRACE_XFER_TYPE))
{
errno = 0;
ptrace (PT_WRITE_U, tid, (PTRACE_ARG3_TYPE) regaddr,
regaddr += sizeof (PTRACE_XFER_TYPE);
if (errno == EIO
- && regno == gdbarch_tdep (current_gdbarch)->ppc_fpscr_regnum)
+ && regno == tdep->ppc_fpscr_regnum)
{
/* Some older kernel versions don't allow fpscr to be written. */
continue;
if (errno != 0)
{
- sprintf (mess, "writing register %s (#%d)",
+ char message[128];
+ sprintf (message, "writing register %s (#%d)",
REGISTER_NAME (regno), regno);
- perror_with_name (mess);
+ perror_with_name (message);
}
}
}
perror_with_name ("Couldn't write AltiVec registers");
}
+static void
+store_spe_registers (int tid)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ struct gdb_evrregset_t evrregs;
+ int i;
+
+ /* The code below should store to every field of evrregs; if that
+ doesn't happen, make it obvious by initializing it with
+ suspicious values. */
+ memset (&evrregs, 42, sizeof (evrregs));
+
+ for (i = 0; i < ppc_num_gprs; i++)
+ {
+ char buf[MAX_REGISTER_SIZE];
+
+ regcache_collect (tdep->ppc_ev0_regnum + i, buf);
+ write_spliced_spe_reg (tid, tdep->ppc_ev0_regnum + i, &evrregs, buf);
+ }
+
+ gdb_assert (sizeof (evrregs.acc)
+ == register_size (current_gdbarch, tdep->ppc_acc_regnum));
+ regcache_collect (tdep->ppc_acc_regnum, &evrregs.acc);
+ gdb_assert (sizeof (evrregs.spefscr)
+ == register_size (current_gdbarch, tdep->ppc_spefscr_regnum));
+ regcache_collect (tdep->ppc_acc_regnum, &evrregs.spefscr);
+
+ set_spe_registers (tid, &evrregs);
+}
+
static void
store_ppc_registers (int tid)
{
int i;
struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
- for (i = 0; i < ppc_num_gprs; i++)
- store_register (tid, tdep->ppc_gp0_regnum + i);
+ if (! tdep->ppc_gprs_pseudo_p)
+ for (i = 0; i < ppc_num_gprs; i++)
+ store_register (tid, tdep->ppc_gp0_regnum + i);
if (tdep->ppc_fp0_regnum >= 0)
for (i = 0; i < ppc_num_fprs; i++)
store_register (tid, tdep->ppc_fp0_regnum + i);
if (have_ptrace_getvrregs)
if (tdep->ppc_vr0_regnum != -1 && tdep->ppc_vrsave_regnum != -1)
store_altivec_registers (tid);
+ if (tdep->ppc_ev0_regnum >= 0)
+ store_spe_registers (tid);
}
void
/* Start with zeros. */
memset (regp, 0, elf_ngreg * sizeof (*regp));
- for (regi = 0; regi < 32; regi++)
+ for (regi = 0; regi < ppc_num_gprs; regi++)
{
- if ((regno == -1) || regno == regi)
- right_fill_reg (regi, (regp + PT_R0 + regi));
+ if ((regno == -1) || regno == tdep->ppc_gp0_regnum + regi)
+ right_fill_reg (tdep->ppc_gp0_regnum + regi, (regp + PT_R0 + regi));
}
if ((regno == -1) || regno == PC_REGNUM)
struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
bfd_byte *fpp = (void *) fpregsetp;
- for (regi = 0; regi < 32; regi++)
+ if (ppc_floating_point_unit_p (current_gdbarch))
{
- if ((regno == -1) || (regno == tdep->ppc_fp0_regnum + regi))
- regcache_collect (tdep->ppc_fp0_regnum + regi, fpp + 8 * regi);
+ for (regi = 0; regi < ppc_num_fprs; regi++)
+ {
+ if ((regno == -1) || (regno == tdep->ppc_fp0_regnum + regi))
+ regcache_collect (tdep->ppc_fp0_regnum + regi, fpp + 8 * regi);
+ }
+ if (regno == -1 || regno == tdep->ppc_fpscr_regnum)
+ right_fill_reg (tdep->ppc_fpscr_regnum, (fpp + 8 * 32));
}
- if ((regno == -1) || regno == tdep->ppc_fpscr_regnum)
- right_fill_reg (tdep->ppc_fpscr_regnum, (fpp + 8 * 32));
}