/* Target-dependent code for GDB, the GNU debugger.
- Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995, 1996,
- 1997, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+ Copyright (C) 1986-2014 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include "frame.h"
#include "regcache.h"
#include "value.h"
#include "osabi.h"
-
+#include "regset.h"
#include "solib-svr4.h"
+#include "solib-spu.h"
+#include "solib.h"
+#include "solist.h"
#include "ppc-tdep.h"
-
-/* The following instructions are used in the signal trampoline code
- on GNU/Linux PPC. The kernel used to use magic syscalls 0x6666 and
- 0x7777 but now uses the sigreturn syscalls. We check for both. */
-#define INSTR_LI_R0_0x6666 0x38006666
-#define INSTR_LI_R0_0x7777 0x38007777
-#define INSTR_LI_R0_NR_sigreturn 0x38000077
-#define INSTR_LI_R0_NR_rt_sigreturn 0x380000AC
-
-#define INSTR_SC 0x44000002
-
-/* Since the *-tdep.c files are platform independent (i.e, they may be
- used to build cross platform debuggers), we can't include system
- headers. Therefore, details concerning the sigcontext structure
- must be painstakingly rerecorded. What's worse, if these details
- ever change in the header files, they'll have to be changed here
- as well. */
-
-/* __SIGNAL_FRAMESIZE from <asm/ptrace.h> */
-#define PPC_LINUX_SIGNAL_FRAMESIZE 64
-
-/* From <asm/sigcontext.h>, offsetof(struct sigcontext_struct, regs) == 0x1c */
-#define PPC_LINUX_REGS_PTR_OFFSET (PPC_LINUX_SIGNAL_FRAMESIZE + 0x1c)
-
-/* From <asm/sigcontext.h>,
- offsetof(struct sigcontext_struct, handler) == 0x14 */
-#define PPC_LINUX_HANDLER_PTR_OFFSET (PPC_LINUX_SIGNAL_FRAMESIZE + 0x14)
-
-/* From <asm/ptrace.h>, values for PT_NIP, PT_R1, and PT_LNK */
-#define PPC_LINUX_PT_R0 0
-#define PPC_LINUX_PT_R1 1
-#define PPC_LINUX_PT_R2 2
-#define PPC_LINUX_PT_R3 3
-#define PPC_LINUX_PT_R4 4
-#define PPC_LINUX_PT_R5 5
-#define PPC_LINUX_PT_R6 6
-#define PPC_LINUX_PT_R7 7
-#define PPC_LINUX_PT_R8 8
-#define PPC_LINUX_PT_R9 9
-#define PPC_LINUX_PT_R10 10
-#define PPC_LINUX_PT_R11 11
-#define PPC_LINUX_PT_R12 12
-#define PPC_LINUX_PT_R13 13
-#define PPC_LINUX_PT_R14 14
-#define PPC_LINUX_PT_R15 15
-#define PPC_LINUX_PT_R16 16
-#define PPC_LINUX_PT_R17 17
-#define PPC_LINUX_PT_R18 18
-#define PPC_LINUX_PT_R19 19
-#define PPC_LINUX_PT_R20 20
-#define PPC_LINUX_PT_R21 21
-#define PPC_LINUX_PT_R22 22
-#define PPC_LINUX_PT_R23 23
-#define PPC_LINUX_PT_R24 24
-#define PPC_LINUX_PT_R25 25
-#define PPC_LINUX_PT_R26 26
-#define PPC_LINUX_PT_R27 27
-#define PPC_LINUX_PT_R28 28
-#define PPC_LINUX_PT_R29 29
-#define PPC_LINUX_PT_R30 30
-#define PPC_LINUX_PT_R31 31
-#define PPC_LINUX_PT_NIP 32
-#define PPC_LINUX_PT_MSR 33
-#define PPC_LINUX_PT_CTR 35
-#define PPC_LINUX_PT_LNK 36
-#define PPC_LINUX_PT_XER 37
-#define PPC_LINUX_PT_CCR 38
-#define PPC_LINUX_PT_MQ 39
-#define PPC_LINUX_PT_FPR0 48 /* each FP reg occupies 2 slots in this space */
-#define PPC_LINUX_PT_FPR31 (PPC_LINUX_PT_FPR0 + 2*31)
-#define PPC_LINUX_PT_FPSCR (PPC_LINUX_PT_FPR0 + 2*32 + 1)
-
-static int ppc_linux_at_sigtramp_return_path (CORE_ADDR pc);
-
-/* Determine if pc is in a signal trampoline...
-
- Ha! That's not what this does at all. wait_for_inferior in
- infrun.c calls PC_IN_SIGTRAMP in order to detect entry into a
- signal trampoline just after delivery of a signal. But on
- GNU/Linux, signal trampolines are used for the return path only.
- The kernel sets things up so that the signal handler is called
- directly.
-
- If we use in_sigtramp2() in place of in_sigtramp() (see below)
- we'll (often) end up with stop_pc in the trampoline and prev_pc in
- the (now exited) handler. The code there will cause a temporary
- breakpoint to be set on prev_pc which is not very likely to get hit
- again.
-
- If this is confusing, think of it this way... the code in
- wait_for_inferior() needs to be able to detect entry into a signal
- trampoline just after a signal is delivered, not after the handler
- has been run.
-
- So, we define in_sigtramp() below to return 1 if the following is
- true:
-
- 1) The previous frame is a real signal trampoline.
-
- - and -
-
- 2) pc is at the first or second instruction of the corresponding
- handler.
-
- Why the second instruction? It seems that wait_for_inferior()
- never sees the first instruction when single stepping. When a
- signal is delivered while stepping, the next instruction that
- would've been stepped over isn't, instead a signal is delivered and
- the first instruction of the handler is stepped over instead. That
- puts us on the second instruction. (I added the test for the
- first instruction long after the fact, just in case the observed
- behavior is ever fixed.)
-
- PC_IN_SIGTRAMP is called from blockframe.c as well in order to set
- the frame's type (if a SIGTRAMP_FRAME). Because of our strange
- definition of in_sigtramp below, we can't rely on the frame's type
- getting set correctly from within blockframe.c. This is why we
- take pains to set it in init_extra_frame_info().
-
- NOTE: cagney/2002-11-10: I suspect the real problem here is that
- the get_prev_frame() only initializes the frame's type after the
- call to INIT_FRAME_INFO. get_prev_frame() should be fixed, this
- code shouldn't be working its way around a bug :-(. */
-
-int
-ppc_linux_in_sigtramp (CORE_ADDR pc, char *func_name)
-{
- CORE_ADDR lr;
- CORE_ADDR sp;
- CORE_ADDR tramp_sp;
- char buf[4];
- CORE_ADDR handler;
-
- lr = read_register (gdbarch_tdep (current_gdbarch)->ppc_lr_regnum);
- if (!ppc_linux_at_sigtramp_return_path (lr))
- return 0;
-
- sp = read_register (SP_REGNUM);
-
- if (target_read_memory (sp, buf, sizeof (buf)) != 0)
- return 0;
-
- tramp_sp = extract_unsigned_integer (buf, 4);
-
- if (target_read_memory (tramp_sp + PPC_LINUX_HANDLER_PTR_OFFSET, buf,
- sizeof (buf)) != 0)
- return 0;
-
- handler = extract_unsigned_integer (buf, 4);
-
- return (pc == handler || pc == handler + 4);
-}
-
-static inline int
-insn_is_sigreturn (unsigned long pcinsn)
-{
- switch(pcinsn)
- {
- case INSTR_LI_R0_0x6666:
- case INSTR_LI_R0_0x7777:
- case INSTR_LI_R0_NR_sigreturn:
- case INSTR_LI_R0_NR_rt_sigreturn:
- return 1;
- default:
- return 0;
- }
-}
-
-/*
- * The signal handler trampoline is on the stack and consists of exactly
- * two instructions. The easiest and most accurate way of determining
- * whether the pc is in one of these trampolines is by inspecting the
- * instructions. It'd be faster though if we could find a way to do this
- * via some simple address comparisons.
- */
-static int
-ppc_linux_at_sigtramp_return_path (CORE_ADDR pc)
-{
- char buf[12];
- unsigned long pcinsn;
- if (target_read_memory (pc - 4, buf, sizeof (buf)) != 0)
- return 0;
-
- /* extract the instruction at the pc */
- pcinsn = extract_unsigned_integer (buf + 4, 4);
-
- return (
- (insn_is_sigreturn (pcinsn)
- && extract_unsigned_integer (buf + 8, 4) == INSTR_SC)
- ||
- (pcinsn == INSTR_SC
- && insn_is_sigreturn (extract_unsigned_integer (buf, 4))));
-}
-
-CORE_ADDR
-ppc_linux_skip_trampoline_code (CORE_ADDR pc)
-{
- char buf[4];
- struct obj_section *sect;
- struct objfile *objfile;
- unsigned long insn;
- CORE_ADDR plt_start = 0;
- CORE_ADDR symtab = 0;
- CORE_ADDR strtab = 0;
- int num_slots = -1;
- int reloc_index = -1;
- CORE_ADDR plt_table;
- CORE_ADDR reloc;
- CORE_ADDR sym;
- long symidx;
- char symname[1024];
- struct minimal_symbol *msymbol;
-
- /* Find the section pc is in; return if not in .plt */
- sect = find_pc_section (pc);
- if (!sect || strcmp (sect->the_bfd_section->name, ".plt") != 0)
- return 0;
-
- objfile = sect->objfile;
-
- /* Pick up the instruction at pc. It had better be of the
- form
- li r11, IDX
-
- where IDX is an index into the plt_table. */
-
- if (target_read_memory (pc, buf, 4) != 0)
- return 0;
- insn = extract_unsigned_integer (buf, 4);
-
- if ((insn & 0xffff0000) != 0x39600000 /* li r11, VAL */ )
- return 0;
-
- reloc_index = (insn << 16) >> 16;
-
- /* Find the objfile that pc is in and obtain the information
- necessary for finding the symbol name. */
- for (sect = objfile->sections; sect < objfile->sections_end; ++sect)
- {
- const char *secname = sect->the_bfd_section->name;
- if (strcmp (secname, ".plt") == 0)
- plt_start = sect->addr;
- else if (strcmp (secname, ".rela.plt") == 0)
- num_slots = ((int) sect->endaddr - (int) sect->addr) / 12;
- else if (strcmp (secname, ".dynsym") == 0)
- symtab = sect->addr;
- else if (strcmp (secname, ".dynstr") == 0)
- strtab = sect->addr;
- }
-
- /* Make sure we have all the information we need. */
- if (plt_start == 0 || num_slots == -1 || symtab == 0 || strtab == 0)
- return 0;
-
- /* Compute the value of the plt table */
- plt_table = plt_start + 72 + 8 * num_slots;
-
- /* Get address of the relocation entry (Elf32_Rela) */
- if (target_read_memory (plt_table + reloc_index, buf, 4) != 0)
- return 0;
- reloc = extract_address (buf, 4);
-
- sect = find_pc_section (reloc);
- if (!sect)
- return 0;
-
- if (strcmp (sect->the_bfd_section->name, ".text") == 0)
- return reloc;
-
- /* Now get the r_info field which is the relocation type and symbol
- index. */
- if (target_read_memory (reloc + 4, buf, 4) != 0)
- return 0;
- symidx = extract_unsigned_integer (buf, 4);
-
- /* Shift out the relocation type leaving just the symbol index */
- /* symidx = ELF32_R_SYM(symidx); */
- symidx = symidx >> 8;
-
- /* compute the address of the symbol */
- sym = symtab + symidx * 4;
-
- /* Fetch the string table index */
- if (target_read_memory (sym, buf, 4) != 0)
- return 0;
- symidx = extract_unsigned_integer (buf, 4);
-
- /* Fetch the string; we don't know how long it is. Is it possible
- that the following will fail because we're trying to fetch too
- much? */
- if (target_read_memory (strtab + symidx, symname, sizeof (symname)) != 0)
- return 0;
-
- /* This might not work right if we have multiple symbols with the
- same name; the only way to really get it right is to perform
- the same sort of lookup as the dynamic linker. */
- msymbol = lookup_minimal_symbol_text (symname, NULL, NULL);
- if (!msymbol)
- return 0;
-
- return SYMBOL_VALUE_ADDRESS (msymbol);
-}
-
-/* The rs6000 version of FRAME_SAVED_PC will almost work for us. The
- signal handler details are different, so we'll handle those here
- and call the rs6000 version to do the rest. */
-CORE_ADDR
-ppc_linux_frame_saved_pc (struct frame_info *fi)
-{
- if ((get_frame_type (fi) == SIGTRAMP_FRAME))
- {
- CORE_ADDR regs_addr =
- read_memory_integer (get_frame_base (fi)
- + PPC_LINUX_REGS_PTR_OFFSET, 4);
- /* return the NIP in the regs array */
- return read_memory_integer (regs_addr + 4 * PPC_LINUX_PT_NIP, 4);
- }
- else if (get_next_frame (fi)
- && (get_frame_type (get_next_frame (fi)) == SIGTRAMP_FRAME))
- {
- CORE_ADDR regs_addr =
- read_memory_integer (get_frame_base (get_next_frame (fi))
- + PPC_LINUX_REGS_PTR_OFFSET, 4);
- /* return LNK in the regs array */
- return read_memory_integer (regs_addr + 4 * PPC_LINUX_PT_LNK, 4);
- }
- else
- return rs6000_frame_saved_pc (fi);
-}
-
-void
-ppc_linux_init_extra_frame_info (int fromleaf, struct frame_info *fi)
-{
- rs6000_init_extra_frame_info (fromleaf, fi);
-
- if (get_next_frame (fi) != 0)
- {
- /* We're called from get_prev_frame_info; check to see if
- this is a signal frame by looking to see if the pc points
- at trampoline code */
- if (ppc_linux_at_sigtramp_return_path (get_frame_pc (fi)))
- deprecated_set_frame_type (fi, SIGTRAMP_FRAME);
- else
- /* FIXME: cagney/2002-11-10: Is this double bogus? What
- happens if the frame has previously been marked as a dummy? */
- deprecated_set_frame_type (fi, NORMAL_FRAME);
- }
-}
-
-int
-ppc_linux_frameless_function_invocation (struct frame_info *fi)
-{
- /* We'll find the wrong thing if we let
- rs6000_frameless_function_invocation () search for a signal trampoline */
- if (ppc_linux_at_sigtramp_return_path (get_frame_pc (fi)))
- return 0;
- else
- return rs6000_frameless_function_invocation (fi);
-}
-
-void
-ppc_linux_frame_init_saved_regs (struct frame_info *fi)
-{
- if ((get_frame_type (fi) == SIGTRAMP_FRAME))
- {
- CORE_ADDR regs_addr;
- int i;
- if (get_frame_saved_regs (fi))
- return;
-
- frame_saved_regs_zalloc (fi);
-
- regs_addr =
- read_memory_integer (get_frame_base (fi)
- + PPC_LINUX_REGS_PTR_OFFSET, 4);
- get_frame_saved_regs (fi)[PC_REGNUM] = regs_addr + 4 * PPC_LINUX_PT_NIP;
- get_frame_saved_regs (fi)[gdbarch_tdep (current_gdbarch)->ppc_ps_regnum] =
- regs_addr + 4 * PPC_LINUX_PT_MSR;
- get_frame_saved_regs (fi)[gdbarch_tdep (current_gdbarch)->ppc_cr_regnum] =
- regs_addr + 4 * PPC_LINUX_PT_CCR;
- get_frame_saved_regs (fi)[gdbarch_tdep (current_gdbarch)->ppc_lr_regnum] =
- regs_addr + 4 * PPC_LINUX_PT_LNK;
- get_frame_saved_regs (fi)[gdbarch_tdep (current_gdbarch)->ppc_ctr_regnum] =
- regs_addr + 4 * PPC_LINUX_PT_CTR;
- get_frame_saved_regs (fi)[gdbarch_tdep (current_gdbarch)->ppc_xer_regnum] =
- regs_addr + 4 * PPC_LINUX_PT_XER;
- get_frame_saved_regs (fi)[gdbarch_tdep (current_gdbarch)->ppc_mq_regnum] =
- regs_addr + 4 * PPC_LINUX_PT_MQ;
- for (i = 0; i < 32; i++)
- get_frame_saved_regs (fi)[gdbarch_tdep (current_gdbarch)->ppc_gp0_regnum + i] =
- regs_addr + 4 * PPC_LINUX_PT_R0 + 4 * i;
- for (i = 0; i < 32; i++)
- get_frame_saved_regs (fi)[FP0_REGNUM + i] = regs_addr + 4 * PPC_LINUX_PT_FPR0 + 8 * i;
- }
- else
- rs6000_frame_init_saved_regs (fi);
-}
-
-CORE_ADDR
-ppc_linux_frame_chain (struct frame_info *thisframe)
-{
- /* Kernel properly constructs the frame chain for the handler */
- if ((get_frame_type (thisframe) == SIGTRAMP_FRAME))
- return read_memory_integer (get_frame_base (thisframe), 4);
- else
- return rs6000_frame_chain (thisframe);
-}
+#include "ppc64-tdep.h"
+#include "ppc-linux-tdep.h"
+#include "glibc-tdep.h"
+#include "trad-frame.h"
+#include "frame-unwind.h"
+#include "tramp-frame.h"
+#include "observer.h"
+#include "auxv.h"
+#include "elf/common.h"
+#include "elf/ppc64.h"
+#include "exceptions.h"
+#include "arch-utils.h"
+#include "spu-tdep.h"
+#include "xml-syscall.h"
+#include "linux-tdep.h"
+
+#include "stap-probe.h"
+#include "ax.h"
+#include "ax-gdb.h"
+#include "cli/cli-utils.h"
+#include "parser-defs.h"
+#include "user-regs.h"
+#include <ctype.h>
+#include "elf-bfd.h" /* for elfcore_write_* */
+
+#include "features/rs6000/powerpc-32l.c"
+#include "features/rs6000/powerpc-altivec32l.c"
+#include "features/rs6000/powerpc-cell32l.c"
+#include "features/rs6000/powerpc-vsx32l.c"
+#include "features/rs6000/powerpc-isa205-32l.c"
+#include "features/rs6000/powerpc-isa205-altivec32l.c"
+#include "features/rs6000/powerpc-isa205-vsx32l.c"
+#include "features/rs6000/powerpc-64l.c"
+#include "features/rs6000/powerpc-altivec64l.c"
+#include "features/rs6000/powerpc-cell64l.c"
+#include "features/rs6000/powerpc-vsx64l.c"
+#include "features/rs6000/powerpc-isa205-64l.c"
+#include "features/rs6000/powerpc-isa205-altivec64l.c"
+#include "features/rs6000/powerpc-isa205-vsx64l.c"
+#include "features/rs6000/powerpc-e500l.c"
+
+/* Shared library operations for PowerPC-Linux. */
+static struct target_so_ops powerpc_so_ops;
+
+/* The syscall's XML filename for PPC and PPC64. */
+#define XML_SYSCALL_FILENAME_PPC "syscalls/ppc-linux.xml"
+#define XML_SYSCALL_FILENAME_PPC64 "syscalls/ppc64-linux.xml"
/* ppc_linux_memory_remove_breakpoints attempts to remove a breakpoint
in much the same fashion as memory_remove_breakpoint in mem-break.c,
Now we've hit the breakpoint at shr1. (The breakpoint was
reset from the PLT entry to the actual shr1 function after the
shared library was loaded.) Note that the PLT entry has been
- resolved to contain a branch that takes us directly to shr1.
+ resolved to contain a branch that takes us directly to shr1.
(The real one, not the PLT entry.)
(gdb) x/2i 0x100409d4
changed twice.
Now the problem should be obvious. GDB places a breakpoint (a
- trap instruction) on the zero value of the PLT entry for shr1.
+ trap instruction) on the zero value of the PLT entry for shr1.
Later on, after the shared library had been loaded and the PLT
initialized, GDB gets a signal indicating this fact and attempts
(as it always does when it stops) to remove all the breakpoints.
word) to be written back to the now initialized PLT entry thus
destroying a portion of the initialization that had occurred only a
short time ago. When execution continued, the zero word would be
- executed as an instruction an an illegal instruction trap was
+ executed as an instruction an illegal instruction trap was
generated instead. (0 is not a legal instruction.)
The fix for this problem was fairly straightforward. The function
that the latter does not is check to make sure that the breakpoint
location actually contains a breakpoint (trap instruction) prior
to attempting to write back the old contents. If it does contain
- a trap instruction, we allow the old contents to be written back.
+ a trap instruction, we allow the old contents to be written back.
Otherwise, we silently do nothing.
The big question is whether memory_remove_breakpoint () should be
else in the event that some other platform has similar needs with
regard to removing breakpoints in some potentially self modifying
code. */
-int
-ppc_linux_memory_remove_breakpoint (CORE_ADDR addr, char *contents_cache)
+static int
+ppc_linux_memory_remove_breakpoint (struct gdbarch *gdbarch,
+ struct bp_target_info *bp_tgt)
{
+ CORE_ADDR addr = bp_tgt->placed_address;
const unsigned char *bp;
int val;
int bplen;
- char old_contents[BREAKPOINT_MAX];
+ gdb_byte old_contents[BREAKPOINT_MAX];
+ struct cleanup *cleanup;
/* Determine appropriate breakpoint contents and size for this address. */
- bp = BREAKPOINT_FROM_PC (&addr, &bplen);
+ bp = gdbarch_breakpoint_from_pc (gdbarch, &addr, &bplen);
if (bp == NULL)
- error ("Software breakpoints not implemented for this target.");
+ error (_("Software breakpoints not implemented for this target."));
+ /* Make sure we see the memory breakpoints. */
+ cleanup = make_show_memory_breakpoints_cleanup (1);
val = target_read_memory (addr, old_contents, bplen);
/* If our breakpoint is no longer at the address, this means that the
program modified the code on us, so it is wrong to put back the
- old value */
+ old value. */
if (val == 0 && memcmp (bp, old_contents, bplen) == 0)
- val = target_write_memory (addr, contents_cache, bplen);
+ val = target_write_raw_memory (addr, bp_tgt->shadow_contents, bplen);
+ do_cleanups (cleanup);
return val;
}
-/* Fetch (and possibly build) an appropriate link_map_offsets
- structure for GNU/Linux PPC targets using the struct offsets
- defined in link.h (but without actual reference to that file).
+/* For historic reasons, PPC 32 GNU/Linux follows PowerOpen rather
+ than the 32 bit SYSV R4 ABI structure return convention - all
+ structures, no matter their size, are put in memory. Vectors,
+ which were added later, do get returned in a register though. */
+
+static enum return_value_convention
+ppc_linux_return_value (struct gdbarch *gdbarch, struct value *function,
+ struct type *valtype, struct regcache *regcache,
+ gdb_byte *readbuf, const gdb_byte *writebuf)
+{
+ if ((TYPE_CODE (valtype) == TYPE_CODE_STRUCT
+ || TYPE_CODE (valtype) == TYPE_CODE_UNION)
+ && !((TYPE_LENGTH (valtype) == 16 || TYPE_LENGTH (valtype) == 8)
+ && TYPE_VECTOR (valtype)))
+ return RETURN_VALUE_STRUCT_CONVENTION;
+ else
+ return ppc_sysv_abi_return_value (gdbarch, function, valtype, regcache,
+ readbuf, writebuf);
+}
+
+static struct core_regset_section ppc_linux_vsx_regset_sections[] =
+{
+ { ".reg", 48 * 4, "general-purpose" },
+ { ".reg2", 264, "floating-point" },
+ { ".reg-ppc-vmx", 544, "ppc Altivec" },
+ { ".reg-ppc-vsx", 256, "POWER7 VSX" },
+ { NULL, 0}
+};
+
+static struct core_regset_section ppc_linux_vmx_regset_sections[] =
+{
+ { ".reg", 48 * 4, "general-purpose" },
+ { ".reg2", 264, "floating-point" },
+ { ".reg-ppc-vmx", 544, "ppc Altivec" },
+ { NULL, 0}
+};
+
+static struct core_regset_section ppc_linux_fp_regset_sections[] =
+{
+ { ".reg", 48 * 4, "general-purpose" },
+ { ".reg2", 264, "floating-point" },
+ { NULL, 0}
+};
+
+static struct core_regset_section ppc64_linux_vsx_regset_sections[] =
+{
+ { ".reg", 48 * 8, "general-purpose" },
+ { ".reg2", 264, "floating-point" },
+ { ".reg-ppc-vmx", 544, "ppc Altivec" },
+ { ".reg-ppc-vsx", 256, "POWER7 VSX" },
+ { NULL, 0}
+};
+
+static struct core_regset_section ppc64_linux_vmx_regset_sections[] =
+{
+ { ".reg", 48 * 8, "general-purpose" },
+ { ".reg2", 264, "floating-point" },
+ { ".reg-ppc-vmx", 544, "ppc Altivec" },
+ { NULL, 0}
+};
+
+static struct core_regset_section ppc64_linux_fp_regset_sections[] =
+{
+ { ".reg", 48 * 8, "general-purpose" },
+ { ".reg2", 264, "floating-point" },
+ { NULL, 0}
+};
+
+/* PLT stub in executable. */
+static struct ppc_insn_pattern powerpc32_plt_stub[] =
+ {
+ { 0xffff0000, 0x3d600000, 0 }, /* lis r11, xxxx */
+ { 0xffff0000, 0x816b0000, 0 }, /* lwz r11, xxxx(r11) */
+ { 0xffffffff, 0x7d6903a6, 0 }, /* mtctr r11 */
+ { 0xffffffff, 0x4e800420, 0 }, /* bctr */
+ { 0, 0, 0 }
+ };
+
+/* PLT stub in shared library. */
+static struct ppc_insn_pattern powerpc32_plt_stub_so[] =
+ {
+ { 0xffff0000, 0x817e0000, 0 }, /* lwz r11, xxxx(r30) */
+ { 0xffffffff, 0x7d6903a6, 0 }, /* mtctr r11 */
+ { 0xffffffff, 0x4e800420, 0 }, /* bctr */
+ { 0xffffffff, 0x60000000, 0 }, /* nop */
+ { 0, 0, 0 }
+ };
+#define POWERPC32_PLT_STUB_LEN ARRAY_SIZE (powerpc32_plt_stub)
+
+/* Check if PC is in PLT stub. For non-secure PLT, stub is in .plt
+ section. For secure PLT, stub is in .text and we need to check
+ instruction patterns. */
+
+static int
+powerpc_linux_in_dynsym_resolve_code (CORE_ADDR pc)
+{
+ struct bound_minimal_symbol sym;
+
+ /* Check whether PC is in the dynamic linker. This also checks
+ whether it is in the .plt section, used by non-PIC executables. */
+ if (svr4_in_dynsym_resolve_code (pc))
+ return 1;
+
+ /* Check if we are in the resolver. */
+ sym = lookup_minimal_symbol_by_pc (pc);
+ if (sym.minsym != NULL
+ && (strcmp (MSYMBOL_LINKAGE_NAME (sym.minsym), "__glink") == 0
+ || strcmp (MSYMBOL_LINKAGE_NAME (sym.minsym),
+ "__glink_PLTresolve") == 0))
+ return 1;
+
+ return 0;
+}
- This makes it possible to access GNU/Linux PPC shared libraries
- from a GDB that was not built on an GNU/Linux PPC host (for cross
- debugging). */
+/* Follow PLT stub to actual routine. */
-struct link_map_offsets *
-ppc_linux_svr4_fetch_link_map_offsets (void)
+static CORE_ADDR
+ppc_skip_trampoline_code (struct frame_info *frame, CORE_ADDR pc)
{
- static struct link_map_offsets lmo;
- static struct link_map_offsets *lmp = NULL;
+ unsigned int insnbuf[POWERPC32_PLT_STUB_LEN];
+ struct gdbarch *gdbarch = get_frame_arch (frame);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+ CORE_ADDR target = 0;
+
+ if (ppc_insns_match_pattern (frame, pc, powerpc32_plt_stub, insnbuf))
+ {
+ /* Insn pattern is
+ lis r11, xxxx
+ lwz r11, xxxx(r11)
+ Branch target is in r11. */
+
+ target = (ppc_insn_d_field (insnbuf[0]) << 16)
+ | ppc_insn_d_field (insnbuf[1]);
+ target = read_memory_unsigned_integer (target, 4, byte_order);
+ }
- if (lmp == NULL)
+ if (ppc_insns_match_pattern (frame, pc, powerpc32_plt_stub_so, insnbuf))
{
- lmp = &lmo;
+ /* Insn pattern is
+ lwz r11, xxxx(r30)
+ Branch target is in r11. */
+
+ target = get_frame_register_unsigned (frame, tdep->ppc_gp0_regnum + 30)
+ + ppc_insn_d_field (insnbuf[0]);
+ target = read_memory_unsigned_integer (target, 4, byte_order);
+ }
- lmo.r_debug_size = 8; /* The actual size is 20 bytes, but
- this is all we need. */
- lmo.r_map_offset = 4;
- lmo.r_map_size = 4;
+ return target;
+}
- lmo.link_map_size = 20; /* The actual size is 560 bytes, but
- this is all we need. */
- lmo.l_addr_offset = 0;
- lmo.l_addr_size = 4;
+/* Wrappers to handle Linux-only registers. */
- lmo.l_name_offset = 4;
- lmo.l_name_size = 4;
+static void
+ppc_linux_supply_gregset (const struct regset *regset,
+ struct regcache *regcache,
+ int regnum, const void *gregs, size_t len)
+{
+ const struct ppc_reg_offsets *offsets = regset->descr;
- lmo.l_next_offset = 12;
- lmo.l_next_size = 4;
+ ppc_supply_gregset (regset, regcache, regnum, gregs, len);
- lmo.l_prev_offset = 16;
- lmo.l_prev_size = 4;
+ if (ppc_linux_trap_reg_p (get_regcache_arch (regcache)))
+ {
+ /* "orig_r3" is stored 2 slots after "pc". */
+ if (regnum == -1 || regnum == PPC_ORIG_R3_REGNUM)
+ ppc_supply_reg (regcache, PPC_ORIG_R3_REGNUM, gregs,
+ offsets->pc_offset + 2 * offsets->gpr_size,
+ offsets->gpr_size);
+
+ /* "trap" is stored 8 slots after "pc". */
+ if (regnum == -1 || regnum == PPC_TRAP_REGNUM)
+ ppc_supply_reg (regcache, PPC_TRAP_REGNUM, gregs,
+ offsets->pc_offset + 8 * offsets->gpr_size,
+ offsets->gpr_size);
}
+}
- return lmp;
+static void
+ppc_linux_collect_gregset (const struct regset *regset,
+ const struct regcache *regcache,
+ int regnum, void *gregs, size_t len)
+{
+ const struct ppc_reg_offsets *offsets = regset->descr;
+
+ /* Clear areas in the linux gregset not written elsewhere. */
+ if (regnum == -1)
+ memset (gregs, 0, len);
+
+ ppc_collect_gregset (regset, regcache, regnum, gregs, len);
+
+ if (ppc_linux_trap_reg_p (get_regcache_arch (regcache)))
+ {
+ /* "orig_r3" is stored 2 slots after "pc". */
+ if (regnum == -1 || regnum == PPC_ORIG_R3_REGNUM)
+ ppc_collect_reg (regcache, PPC_ORIG_R3_REGNUM, gregs,
+ offsets->pc_offset + 2 * offsets->gpr_size,
+ offsets->gpr_size);
+
+ /* "trap" is stored 8 slots after "pc". */
+ if (regnum == -1 || regnum == PPC_TRAP_REGNUM)
+ ppc_collect_reg (regcache, PPC_TRAP_REGNUM, gregs,
+ offsets->pc_offset + 8 * offsets->gpr_size,
+ offsets->gpr_size);
+ }
}
-enum {
- ELF_NGREG = 48,
- ELF_NFPREG = 33,
- ELF_NVRREG = 33
+/* Regset descriptions. */
+static const struct ppc_reg_offsets ppc32_linux_reg_offsets =
+ {
+ /* General-purpose registers. */
+ /* .r0_offset = */ 0,
+ /* .gpr_size = */ 4,
+ /* .xr_size = */ 4,
+ /* .pc_offset = */ 128,
+ /* .ps_offset = */ 132,
+ /* .cr_offset = */ 152,
+ /* .lr_offset = */ 144,
+ /* .ctr_offset = */ 140,
+ /* .xer_offset = */ 148,
+ /* .mq_offset = */ 156,
+
+ /* Floating-point registers. */
+ /* .f0_offset = */ 0,
+ /* .fpscr_offset = */ 256,
+ /* .fpscr_size = */ 8,
+
+ /* AltiVec registers. */
+ /* .vr0_offset = */ 0,
+ /* .vscr_offset = */ 512 + 12,
+ /* .vrsave_offset = */ 528
+ };
+
+static const struct ppc_reg_offsets ppc64_linux_reg_offsets =
+ {
+ /* General-purpose registers. */
+ /* .r0_offset = */ 0,
+ /* .gpr_size = */ 8,
+ /* .xr_size = */ 8,
+ /* .pc_offset = */ 256,
+ /* .ps_offset = */ 264,
+ /* .cr_offset = */ 304,
+ /* .lr_offset = */ 288,
+ /* .ctr_offset = */ 280,
+ /* .xer_offset = */ 296,
+ /* .mq_offset = */ 312,
+
+ /* Floating-point registers. */
+ /* .f0_offset = */ 0,
+ /* .fpscr_offset = */ 256,
+ /* .fpscr_size = */ 8,
+
+ /* AltiVec registers. */
+ /* .vr0_offset = */ 0,
+ /* .vscr_offset = */ 512 + 12,
+ /* .vrsave_offset = */ 528
+ };
+
+static const struct regset ppc32_linux_gregset = {
+ &ppc32_linux_reg_offsets,
+ ppc_linux_supply_gregset,
+ ppc_linux_collect_gregset,
+ NULL
};
-enum {
- ELF_GREGSET_SIZE = (ELF_NGREG * 4),
- ELF_FPREGSET_SIZE = (ELF_NFPREG * 8)
+static const struct regset ppc64_linux_gregset = {
+ &ppc64_linux_reg_offsets,
+ ppc_linux_supply_gregset,
+ ppc_linux_collect_gregset,
+ NULL
};
-void
-ppc_linux_supply_gregset (char *buf)
+static const struct regset ppc32_linux_fpregset = {
+ &ppc32_linux_reg_offsets,
+ ppc_supply_fpregset,
+ ppc_collect_fpregset,
+ NULL
+};
+
+static const struct regset ppc32_linux_vrregset = {
+ &ppc32_linux_reg_offsets,
+ ppc_supply_vrregset,
+ ppc_collect_vrregset,
+ NULL
+};
+
+static const struct regset ppc32_linux_vsxregset = {
+ &ppc32_linux_reg_offsets,
+ ppc_supply_vsxregset,
+ ppc_collect_vsxregset,
+ NULL
+};
+
+const struct regset *
+ppc_linux_gregset (int wordsize)
{
- int regi;
- struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ return wordsize == 8 ? &ppc64_linux_gregset : &ppc32_linux_gregset;
+}
- for (regi = 0; regi < 32; regi++)
- supply_register (regi, buf + 4 * regi);
+const struct regset *
+ppc_linux_fpregset (void)
+{
+ return &ppc32_linux_fpregset;
+}
- supply_register (PC_REGNUM, buf + 4 * PPC_LINUX_PT_NIP);
- supply_register (tdep->ppc_lr_regnum, buf + 4 * PPC_LINUX_PT_LNK);
- supply_register (tdep->ppc_cr_regnum, buf + 4 * PPC_LINUX_PT_CCR);
- supply_register (tdep->ppc_xer_regnum, buf + 4 * PPC_LINUX_PT_XER);
- supply_register (tdep->ppc_ctr_regnum, buf + 4 * PPC_LINUX_PT_CTR);
- if (tdep->ppc_mq_regnum != -1)
- supply_register (tdep->ppc_mq_regnum, buf + 4 * PPC_LINUX_PT_MQ);
- supply_register (tdep->ppc_ps_regnum, buf + 4 * PPC_LINUX_PT_MSR);
+static const struct regset *
+ppc_linux_regset_from_core_section (struct gdbarch *core_arch,
+ const char *sect_name, size_t sect_size)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (core_arch);
+ if (strcmp (sect_name, ".reg") == 0)
+ {
+ if (tdep->wordsize == 4)
+ return &ppc32_linux_gregset;
+ else
+ return &ppc64_linux_gregset;
+ }
+ if (strcmp (sect_name, ".reg2") == 0)
+ return &ppc32_linux_fpregset;
+ if (strcmp (sect_name, ".reg-ppc-vmx") == 0)
+ return &ppc32_linux_vrregset;
+ if (strcmp (sect_name, ".reg-ppc-vsx") == 0)
+ return &ppc32_linux_vsxregset;
+ return NULL;
}
-void
-ppc_linux_supply_fpregset (char *buf)
+static void
+ppc_linux_sigtramp_cache (struct frame_info *this_frame,
+ struct trad_frame_cache *this_cache,
+ CORE_ADDR func, LONGEST offset,
+ int bias)
{
- int regi;
- struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ CORE_ADDR base;
+ CORE_ADDR regs;
+ CORE_ADDR gpregs;
+ CORE_ADDR fpregs;
+ int i;
+ struct gdbarch *gdbarch = get_frame_arch (this_frame);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+
+ base = get_frame_register_unsigned (this_frame,
+ gdbarch_sp_regnum (gdbarch));
+ if (bias > 0 && get_frame_pc (this_frame) != func)
+ /* See below, some signal trampolines increment the stack as their
+ first instruction, need to compensate for that. */
+ base -= bias;
+
+ /* Find the address of the register buffer pointer. */
+ regs = base + offset;
+ /* Use that to find the address of the corresponding register
+ buffers. */
+ gpregs = read_memory_unsigned_integer (regs, tdep->wordsize, byte_order);
+ fpregs = gpregs + 48 * tdep->wordsize;
+
+ /* General purpose. */
+ for (i = 0; i < 32; i++)
+ {
+ int regnum = i + tdep->ppc_gp0_regnum;
+ trad_frame_set_reg_addr (this_cache,
+ regnum, gpregs + i * tdep->wordsize);
+ }
+ trad_frame_set_reg_addr (this_cache,
+ gdbarch_pc_regnum (gdbarch),
+ gpregs + 32 * tdep->wordsize);
+ trad_frame_set_reg_addr (this_cache, tdep->ppc_ctr_regnum,
+ gpregs + 35 * tdep->wordsize);
+ trad_frame_set_reg_addr (this_cache, tdep->ppc_lr_regnum,
+ gpregs + 36 * tdep->wordsize);
+ trad_frame_set_reg_addr (this_cache, tdep->ppc_xer_regnum,
+ gpregs + 37 * tdep->wordsize);
+ trad_frame_set_reg_addr (this_cache, tdep->ppc_cr_regnum,
+ gpregs + 38 * tdep->wordsize);
+
+ if (ppc_linux_trap_reg_p (gdbarch))
+ {
+ trad_frame_set_reg_addr (this_cache, PPC_ORIG_R3_REGNUM,
+ gpregs + 34 * tdep->wordsize);
+ trad_frame_set_reg_addr (this_cache, PPC_TRAP_REGNUM,
+ gpregs + 40 * tdep->wordsize);
+ }
- for (regi = 0; regi < 32; regi++)
- supply_register (FP0_REGNUM + regi, buf + 8 * regi);
+ if (ppc_floating_point_unit_p (gdbarch))
+ {
+ /* Floating point registers. */
+ for (i = 0; i < 32; i++)
+ {
+ int regnum = i + gdbarch_fp0_regnum (gdbarch);
+ trad_frame_set_reg_addr (this_cache, regnum,
+ fpregs + i * tdep->wordsize);
+ }
+ trad_frame_set_reg_addr (this_cache, tdep->ppc_fpscr_regnum,
+ fpregs + 32 * tdep->wordsize);
+ }
+ trad_frame_set_id (this_cache, frame_id_build (base, func));
+}
+
+static void
+ppc32_linux_sigaction_cache_init (const struct tramp_frame *self,
+ struct frame_info *this_frame,
+ struct trad_frame_cache *this_cache,
+ CORE_ADDR func)
+{
+ ppc_linux_sigtramp_cache (this_frame, this_cache, func,
+ 0xd0 /* Offset to ucontext_t. */
+ + 0x30 /* Offset to .reg. */,
+ 0);
+}
- /* The FPSCR is stored in the low order word of the last doubleword in the
- fpregset. */
- supply_register (tdep->ppc_fpscr_regnum, buf + 8 * 32 + 4);
+static void
+ppc64_linux_sigaction_cache_init (const struct tramp_frame *self,
+ struct frame_info *this_frame,
+ struct trad_frame_cache *this_cache,
+ CORE_ADDR func)
+{
+ ppc_linux_sigtramp_cache (this_frame, this_cache, func,
+ 0x80 /* Offset to ucontext_t. */
+ + 0xe0 /* Offset to .reg. */,
+ 128);
+}
+
+static void
+ppc32_linux_sighandler_cache_init (const struct tramp_frame *self,
+ struct frame_info *this_frame,
+ struct trad_frame_cache *this_cache,
+ CORE_ADDR func)
+{
+ ppc_linux_sigtramp_cache (this_frame, this_cache, func,
+ 0x40 /* Offset to ucontext_t. */
+ + 0x1c /* Offset to .reg. */,
+ 0);
}
-/*
- Use a local version of this function to get the correct types for regsets.
-*/
+static void
+ppc64_linux_sighandler_cache_init (const struct tramp_frame *self,
+ struct frame_info *this_frame,
+ struct trad_frame_cache *this_cache,
+ CORE_ADDR func)
+{
+ ppc_linux_sigtramp_cache (this_frame, this_cache, func,
+ 0x80 /* Offset to struct sigcontext. */
+ + 0x38 /* Offset to .reg. */,
+ 128);
+}
+
+static struct tramp_frame ppc32_linux_sigaction_tramp_frame = {
+ SIGTRAMP_FRAME,
+ 4,
+ {
+ { 0x380000ac, -1 }, /* li r0, 172 */
+ { 0x44000002, -1 }, /* sc */
+ { TRAMP_SENTINEL_INSN },
+ },
+ ppc32_linux_sigaction_cache_init
+};
+static struct tramp_frame ppc64_linux_sigaction_tramp_frame = {
+ SIGTRAMP_FRAME,
+ 4,
+ {
+ { 0x38210080, -1 }, /* addi r1,r1,128 */
+ { 0x380000ac, -1 }, /* li r0, 172 */
+ { 0x44000002, -1 }, /* sc */
+ { TRAMP_SENTINEL_INSN },
+ },
+ ppc64_linux_sigaction_cache_init
+};
+static struct tramp_frame ppc32_linux_sighandler_tramp_frame = {
+ SIGTRAMP_FRAME,
+ 4,
+ {
+ { 0x38000077, -1 }, /* li r0,119 */
+ { 0x44000002, -1 }, /* sc */
+ { TRAMP_SENTINEL_INSN },
+ },
+ ppc32_linux_sighandler_cache_init
+};
+static struct tramp_frame ppc64_linux_sighandler_tramp_frame = {
+ SIGTRAMP_FRAME,
+ 4,
+ {
+ { 0x38210080, -1 }, /* addi r1,r1,128 */
+ { 0x38000077, -1 }, /* li r0,119 */
+ { 0x44000002, -1 }, /* sc */
+ { TRAMP_SENTINEL_INSN },
+ },
+ ppc64_linux_sighandler_cache_init
+};
+
+
+/* Address to use for displaced stepping. When debugging a stand-alone
+ SPU executable, entry_point_address () will point to an SPU local-store
+ address and is thus not usable as displaced stepping location. We use
+ the auxiliary vector to determine the PowerPC-side entry point address
+ instead. */
+
+static CORE_ADDR ppc_linux_entry_point_addr = 0;
static void
-fetch_core_registers (char *core_reg_sect,
- unsigned core_reg_size,
- int which,
- CORE_ADDR reg_addr)
+ppc_linux_inferior_created (struct target_ops *target, int from_tty)
{
- if (which == 0)
+ ppc_linux_entry_point_addr = 0;
+}
+
+static CORE_ADDR
+ppc_linux_displaced_step_location (struct gdbarch *gdbarch)
+{
+ if (ppc_linux_entry_point_addr == 0)
{
- if (core_reg_size == ELF_GREGSET_SIZE)
- ppc_linux_supply_gregset (core_reg_sect);
- else
- warning ("wrong size gregset struct in core file");
+ CORE_ADDR addr;
+
+ /* Determine entry point from target auxiliary vector. */
+ if (target_auxv_search (¤t_target, AT_ENTRY, &addr) <= 0)
+ error (_("Cannot find AT_ENTRY auxiliary vector entry."));
+
+ /* Make certain that the address points at real code, and not a
+ function descriptor. */
+ addr = gdbarch_convert_from_func_ptr_addr (gdbarch, addr,
+ ¤t_target);
+
+ /* Inferior calls also use the entry point as a breakpoint location.
+ We don't want displaced stepping to interfere with those
+ breakpoints, so leave space. */
+ ppc_linux_entry_point_addr = addr + 2 * PPC_INSN_SIZE;
}
- else if (which == 2)
+
+ return ppc_linux_entry_point_addr;
+}
+
+
+/* Return 1 if PPC_ORIG_R3_REGNUM and PPC_TRAP_REGNUM are usable. */
+int
+ppc_linux_trap_reg_p (struct gdbarch *gdbarch)
+{
+ /* If we do not have a target description with registers, then
+ the special registers will not be included in the register set. */
+ if (!tdesc_has_registers (gdbarch_target_desc (gdbarch)))
+ return 0;
+
+ /* If we do, then it is safe to check the size. */
+ return register_size (gdbarch, PPC_ORIG_R3_REGNUM) > 0
+ && register_size (gdbarch, PPC_TRAP_REGNUM) > 0;
+}
+
+/* Return the current system call's number present in the
+ r0 register. When the function fails, it returns -1. */
+static LONGEST
+ppc_linux_get_syscall_number (struct gdbarch *gdbarch,
+ ptid_t ptid)
+{
+ struct regcache *regcache = get_thread_regcache (ptid);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+ struct cleanup *cleanbuf;
+ /* The content of a register */
+ gdb_byte *buf;
+ /* The result */
+ LONGEST ret;
+
+ /* Make sure we're in a 32- or 64-bit machine */
+ gdb_assert (tdep->wordsize == 4 || tdep->wordsize == 8);
+
+ buf = (gdb_byte *) xmalloc (tdep->wordsize * sizeof (gdb_byte));
+
+ cleanbuf = make_cleanup (xfree, buf);
+
+ /* Getting the system call number from the register.
+ When dealing with PowerPC architecture, this information
+ is stored at 0th register. */
+ regcache_cooked_read (regcache, tdep->ppc_gp0_regnum, buf);
+
+ ret = extract_signed_integer (buf, tdep->wordsize, byte_order);
+ do_cleanups (cleanbuf);
+
+ return ret;
+}
+
+static void
+ppc_linux_write_pc (struct regcache *regcache, CORE_ADDR pc)
+{
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+
+ regcache_cooked_write_unsigned (regcache, gdbarch_pc_regnum (gdbarch), pc);
+
+ /* Set special TRAP register to -1 to prevent the kernel from
+ messing with the PC we just installed, if we happen to be
+ within an interrupted system call that the kernel wants to
+ restart.
+
+ Note that after we return from the dummy call, the TRAP and
+ ORIG_R3 registers will be automatically restored, and the
+ kernel continues to restart the system call at this point. */
+ if (ppc_linux_trap_reg_p (gdbarch))
+ regcache_cooked_write_unsigned (regcache, PPC_TRAP_REGNUM, -1);
+}
+
+static int
+ppc_linux_spu_section (bfd *abfd, asection *asect, void *user_data)
+{
+ return strncmp (bfd_section_name (abfd, asect), "SPU/", 4) == 0;
+}
+
+static const struct target_desc *
+ppc_linux_core_read_description (struct gdbarch *gdbarch,
+ struct target_ops *target,
+ bfd *abfd)
+{
+ asection *cell = bfd_sections_find_if (abfd, ppc_linux_spu_section, NULL);
+ asection *altivec = bfd_get_section_by_name (abfd, ".reg-ppc-vmx");
+ asection *vsx = bfd_get_section_by_name (abfd, ".reg-ppc-vsx");
+ asection *section = bfd_get_section_by_name (abfd, ".reg");
+ if (! section)
+ return NULL;
+
+ switch (bfd_section_size (abfd, section))
{
- if (core_reg_size == ELF_FPREGSET_SIZE)
- ppc_linux_supply_fpregset (core_reg_sect);
+ case 48 * 4:
+ if (cell)
+ return tdesc_powerpc_cell32l;
+ else if (vsx)
+ return tdesc_powerpc_vsx32l;
+ else if (altivec)
+ return tdesc_powerpc_altivec32l;
else
- warning ("wrong size fpregset struct in core file");
+ return tdesc_powerpc_32l;
+
+ case 48 * 8:
+ if (cell)
+ return tdesc_powerpc_cell64l;
+ else if (vsx)
+ return tdesc_powerpc_vsx64l;
+ else if (altivec)
+ return tdesc_powerpc_altivec64l;
+ else
+ return tdesc_powerpc_64l;
+
+ default:
+ return NULL;
+ }
+}
+
+
+/* Implementation of `gdbarch_elf_make_msymbol_special', as defined in
+ gdbarch.h. This implementation is used for the ELFv2 ABI only. */
+
+static void
+ppc_elfv2_elf_make_msymbol_special (asymbol *sym, struct minimal_symbol *msym)
+{
+ elf_symbol_type *elf_sym = (elf_symbol_type *)sym;
+
+ /* If the symbol is marked as having a local entry point, set a target
+ flag in the msymbol. We currently only support local entry point
+ offsets of 8 bytes, which is the only entry point offset ever used
+ by current compilers. If/when other offsets are ever used, we will
+ have to use additional target flag bits to store them. */
+ switch (PPC64_LOCAL_ENTRY_OFFSET (elf_sym->internal_elf_sym.st_other))
+ {
+ default:
+ break;
+ case 8:
+ MSYMBOL_TARGET_FLAG_1 (msym) = 1;
+ break;
+ }
+}
+
+/* Implementation of `gdbarch_skip_entrypoint', as defined in
+ gdbarch.h. This implementation is used for the ELFv2 ABI only. */
+
+static CORE_ADDR
+ppc_elfv2_skip_entrypoint (struct gdbarch *gdbarch, CORE_ADDR pc)
+{
+ struct bound_minimal_symbol fun;
+ int local_entry_offset = 0;
+
+ fun = lookup_minimal_symbol_by_pc (pc);
+ if (fun.minsym == NULL)
+ return pc;
+
+ /* See ppc_elfv2_elf_make_msymbol_special for how local entry point
+ offset values are encoded. */
+ if (MSYMBOL_TARGET_FLAG_1 (fun.minsym))
+ local_entry_offset = 8;
+
+ if (MSYMBOL_VALUE_ADDRESS (fun.minsym) <= pc
+ && pc < MSYMBOL_VALUE_ADDRESS (fun.minsym) + local_entry_offset)
+ return MSYMBOL_VALUE_ADDRESS (fun.minsym) + local_entry_offset;
+
+ return pc;
+}
+
+/* Implementation of `gdbarch_stap_is_single_operand', as defined in
+ gdbarch.h. */
+
+static int
+ppc_stap_is_single_operand (struct gdbarch *gdbarch, const char *s)
+{
+ return (*s == 'i' /* Literal number. */
+ || (isdigit (*s) && s[1] == '('
+ && isdigit (s[2])) /* Displacement. */
+ || (*s == '(' && isdigit (s[1])) /* Register indirection. */
+ || isdigit (*s)); /* Register value. */
+}
+
+/* Implementation of `gdbarch_stap_parse_special_token', as defined in
+ gdbarch.h. */
+
+static int
+ppc_stap_parse_special_token (struct gdbarch *gdbarch,
+ struct stap_parse_info *p)
+{
+ if (isdigit (*p->arg))
+ {
+ /* This temporary pointer is needed because we have to do a lookahead.
+ We could be dealing with a register displacement, and in such case
+ we would not need to do anything. */
+ const char *s = p->arg;
+ char *regname;
+ int len;
+ struct stoken str;
+
+ while (isdigit (*s))
+ ++s;
+
+ if (*s == '(')
+ {
+ /* It is a register displacement indeed. Returning 0 means we are
+ deferring the treatment of this case to the generic parser. */
+ return 0;
+ }
+
+ len = s - p->arg;
+ regname = alloca (len + 2);
+ regname[0] = 'r';
+
+ strncpy (regname + 1, p->arg, len);
+ ++len;
+ regname[len] = '\0';
+
+ if (user_reg_map_name_to_regnum (gdbarch, regname, len) == -1)
+ error (_("Invalid register name `%s' on expression `%s'."),
+ regname, p->saved_arg);
+
+ write_exp_elt_opcode (OP_REGISTER);
+ str.ptr = regname;
+ str.length = len;
+ write_exp_string (str);
+ write_exp_elt_opcode (OP_REGISTER);
+
+ p->arg = s;
+ }
+ else
+ {
+ /* All the other tokens should be handled correctly by the generic
+ parser. */
+ return 0;
+ }
+
+ return 1;
+}
+
+/* Cell/B.E. active SPE context tracking support. */
+
+static struct objfile *spe_context_objfile = NULL;
+static CORE_ADDR spe_context_lm_addr = 0;
+static CORE_ADDR spe_context_offset = 0;
+
+static ptid_t spe_context_cache_ptid;
+static CORE_ADDR spe_context_cache_address;
+
+/* Hook into inferior_created, solib_loaded, and solib_unloaded observers
+ to track whether we've loaded a version of libspe2 (as static or dynamic
+ library) that provides the __spe_current_active_context variable. */
+static void
+ppc_linux_spe_context_lookup (struct objfile *objfile)
+{
+ struct bound_minimal_symbol sym;
+
+ if (!objfile)
+ {
+ spe_context_objfile = NULL;
+ spe_context_lm_addr = 0;
+ spe_context_offset = 0;
+ spe_context_cache_ptid = minus_one_ptid;
+ spe_context_cache_address = 0;
+ return;
+ }
+
+ sym = lookup_minimal_symbol ("__spe_current_active_context", NULL, objfile);
+ if (sym.minsym)
+ {
+ spe_context_objfile = objfile;
+ spe_context_lm_addr = svr4_fetch_objfile_link_map (objfile);
+ spe_context_offset = MSYMBOL_VALUE_ADDRESS (sym.minsym);
+ spe_context_cache_ptid = minus_one_ptid;
+ spe_context_cache_address = 0;
+ return;
+ }
+}
+
+static void
+ppc_linux_spe_context_inferior_created (struct target_ops *t, int from_tty)
+{
+ struct objfile *objfile;
+
+ ppc_linux_spe_context_lookup (NULL);
+ ALL_OBJFILES (objfile)
+ ppc_linux_spe_context_lookup (objfile);
+}
+
+static void
+ppc_linux_spe_context_solib_loaded (struct so_list *so)
+{
+ if (strstr (so->so_original_name, "/libspe") != NULL)
+ {
+ solib_read_symbols (so, 0);
+ ppc_linux_spe_context_lookup (so->objfile);
+ }
+}
+
+static void
+ppc_linux_spe_context_solib_unloaded (struct so_list *so)
+{
+ if (so->objfile == spe_context_objfile)
+ ppc_linux_spe_context_lookup (NULL);
+}
+
+/* Retrieve contents of the N'th element in the current thread's
+ linked SPE context list into ID and NPC. Return the address of
+ said context element, or 0 if not found. */
+static CORE_ADDR
+ppc_linux_spe_context (int wordsize, enum bfd_endian byte_order,
+ int n, int *id, unsigned int *npc)
+{
+ CORE_ADDR spe_context = 0;
+ gdb_byte buf[16];
+ int i;
+
+ /* Quick exit if we have not found __spe_current_active_context. */
+ if (!spe_context_objfile)
+ return 0;
+
+ /* Look up cached address of thread-local variable. */
+ if (!ptid_equal (spe_context_cache_ptid, inferior_ptid))
+ {
+ struct target_ops *target = ¤t_target;
+ volatile struct gdb_exception ex;
+
+ while (target && !target->to_get_thread_local_address)
+ target = find_target_beneath (target);
+ if (!target)
+ return 0;
+
+ TRY_CATCH (ex, RETURN_MASK_ERROR)
+ {
+ /* We do not call target_translate_tls_address here, because
+ svr4_fetch_objfile_link_map may invalidate the frame chain,
+ which must not do while inside a frame sniffer.
+
+ Instead, we have cached the lm_addr value, and use that to
+ directly call the target's to_get_thread_local_address. */
+ spe_context_cache_address
+ = target->to_get_thread_local_address (target, inferior_ptid,
+ spe_context_lm_addr,
+ spe_context_offset);
+ spe_context_cache_ptid = inferior_ptid;
+ }
+
+ if (ex.reason < 0)
+ return 0;
}
+
+ /* Read variable value. */
+ if (target_read_memory (spe_context_cache_address, buf, wordsize) == 0)
+ spe_context = extract_unsigned_integer (buf, wordsize, byte_order);
+
+ /* Cyle through to N'th linked list element. */
+ for (i = 0; i < n && spe_context; i++)
+ if (target_read_memory (spe_context + align_up (12, wordsize),
+ buf, wordsize) == 0)
+ spe_context = extract_unsigned_integer (buf, wordsize, byte_order);
+ else
+ spe_context = 0;
+
+ /* Read current context. */
+ if (spe_context
+ && target_read_memory (spe_context, buf, 12) != 0)
+ spe_context = 0;
+
+ /* Extract data elements. */
+ if (spe_context)
+ {
+ if (id)
+ *id = extract_signed_integer (buf, 4, byte_order);
+ if (npc)
+ *npc = extract_unsigned_integer (buf + 4, 4, byte_order);
+ }
+
+ return spe_context;
}
-/* Register that we are able to handle ELF file formats using standard
- procfs "regset" structures. */
-static struct core_fns ppc_linux_regset_core_fns =
+/* Cell/B.E. cross-architecture unwinder support. */
+
+struct ppu2spu_cache
{
- bfd_target_elf_flavour, /* core_flavour */
- default_check_format, /* check_format */
- default_core_sniffer, /* core_sniffer */
- fetch_core_registers, /* core_read_registers */
- NULL /* next */
+ struct frame_id frame_id;
+ struct regcache *regcache;
};
+static struct gdbarch *
+ppu2spu_prev_arch (struct frame_info *this_frame, void **this_cache)
+{
+ struct ppu2spu_cache *cache = *this_cache;
+ return get_regcache_arch (cache->regcache);
+}
+
+static void
+ppu2spu_this_id (struct frame_info *this_frame,
+ void **this_cache, struct frame_id *this_id)
+{
+ struct ppu2spu_cache *cache = *this_cache;
+ *this_id = cache->frame_id;
+}
+
+static struct value *
+ppu2spu_prev_register (struct frame_info *this_frame,
+ void **this_cache, int regnum)
+{
+ struct ppu2spu_cache *cache = *this_cache;
+ struct gdbarch *gdbarch = get_regcache_arch (cache->regcache);
+ gdb_byte *buf;
+
+ buf = alloca (register_size (gdbarch, regnum));
+
+ if (regnum < gdbarch_num_regs (gdbarch))
+ regcache_raw_read (cache->regcache, regnum, buf);
+ else
+ gdbarch_pseudo_register_read (gdbarch, cache->regcache, regnum, buf);
+
+ return frame_unwind_got_bytes (this_frame, regnum, buf);
+}
+
+struct ppu2spu_data
+{
+ struct gdbarch *gdbarch;
+ int id;
+ unsigned int npc;
+ gdb_byte gprs[128*16];
+};
+
+static int
+ppu2spu_unwind_register (void *src, int regnum, gdb_byte *buf)
+{
+ struct ppu2spu_data *data = src;
+ enum bfd_endian byte_order = gdbarch_byte_order (data->gdbarch);
+
+ if (regnum >= 0 && regnum < SPU_NUM_GPRS)
+ memcpy (buf, data->gprs + 16*regnum, 16);
+ else if (regnum == SPU_ID_REGNUM)
+ store_unsigned_integer (buf, 4, byte_order, data->id);
+ else if (regnum == SPU_PC_REGNUM)
+ store_unsigned_integer (buf, 4, byte_order, data->npc);
+ else
+ return REG_UNAVAILABLE;
+
+ return REG_VALID;
+}
+
+static int
+ppu2spu_sniffer (const struct frame_unwind *self,
+ struct frame_info *this_frame, void **this_prologue_cache)
+{
+ struct gdbarch *gdbarch = get_frame_arch (this_frame);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+ struct ppu2spu_data data;
+ struct frame_info *fi;
+ CORE_ADDR base, func, backchain, spe_context;
+ gdb_byte buf[8];
+ int n = 0;
+
+ /* Count the number of SPU contexts already in the frame chain. */
+ for (fi = get_next_frame (this_frame); fi; fi = get_next_frame (fi))
+ if (get_frame_type (fi) == ARCH_FRAME
+ && gdbarch_bfd_arch_info (get_frame_arch (fi))->arch == bfd_arch_spu)
+ n++;
+
+ base = get_frame_sp (this_frame);
+ func = get_frame_pc (this_frame);
+ if (target_read_memory (base, buf, tdep->wordsize))
+ return 0;
+ backchain = extract_unsigned_integer (buf, tdep->wordsize, byte_order);
+
+ spe_context = ppc_linux_spe_context (tdep->wordsize, byte_order,
+ n, &data.id, &data.npc);
+ if (spe_context && base <= spe_context && spe_context < backchain)
+ {
+ char annex[32];
+
+ /* Find gdbarch for SPU. */
+ struct gdbarch_info info;
+ gdbarch_info_init (&info);
+ info.bfd_arch_info = bfd_lookup_arch (bfd_arch_spu, bfd_mach_spu);
+ info.byte_order = BFD_ENDIAN_BIG;
+ info.osabi = GDB_OSABI_LINUX;
+ info.tdep_info = (void *) &data.id;
+ data.gdbarch = gdbarch_find_by_info (info);
+ if (!data.gdbarch)
+ return 0;
+
+ xsnprintf (annex, sizeof annex, "%d/regs", data.id);
+ if (target_read (¤t_target, TARGET_OBJECT_SPU, annex,
+ data.gprs, 0, sizeof data.gprs)
+ == sizeof data.gprs)
+ {
+ struct ppu2spu_cache *cache
+ = FRAME_OBSTACK_CALLOC (1, struct ppu2spu_cache);
+
+ struct address_space *aspace = get_frame_address_space (this_frame);
+ struct regcache *regcache = regcache_xmalloc (data.gdbarch, aspace);
+ struct cleanup *cleanups = make_cleanup_regcache_xfree (regcache);
+ regcache_save (regcache, ppu2spu_unwind_register, &data);
+ discard_cleanups (cleanups);
+
+ cache->frame_id = frame_id_build (base, func);
+ cache->regcache = regcache;
+ *this_prologue_cache = cache;
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+static void
+ppu2spu_dealloc_cache (struct frame_info *self, void *this_cache)
+{
+ struct ppu2spu_cache *cache = this_cache;
+ regcache_xfree (cache->regcache);
+}
+
+static const struct frame_unwind ppu2spu_unwind = {
+ ARCH_FRAME,
+ default_frame_unwind_stop_reason,
+ ppu2spu_this_id,
+ ppu2spu_prev_register,
+ NULL,
+ ppu2spu_sniffer,
+ ppu2spu_dealloc_cache,
+ ppu2spu_prev_arch,
+};
+
+
static void
ppc_linux_init_abi (struct gdbarch_info info,
struct gdbarch *gdbarch)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
-
- /* Until November 2001, gcc was not complying to the SYSV ABI for
- returning structures less than or equal to 8 bytes in size. It was
- returning everything in memory. When this was corrected, it wasn't
- fixed for native platforms. */
- set_gdbarch_use_struct_convention (gdbarch,
- ppc_sysv_abi_broken_use_struct_convention);
+ struct tdesc_arch_data *tdesc_data = (void *) info.tdep_info;
+ static const char *const stap_integer_prefixes[] = { "i", NULL };
+ static const char *const stap_register_indirection_prefixes[] = { "(",
+ NULL };
+ static const char *const stap_register_indirection_suffixes[] = { ")",
+ NULL };
+
+ linux_init_abi (info, gdbarch);
+
+ /* PPC GNU/Linux uses either 64-bit or 128-bit long doubles; where
+ 128-bit, they are IBM long double, not IEEE quad long double as
+ in the System V ABI PowerPC Processor Supplement. We can safely
+ let them default to 128-bit, since the debug info will give the
+ size of type actually used in each case. */
+ set_gdbarch_long_double_bit (gdbarch, 16 * TARGET_CHAR_BIT);
+ set_gdbarch_long_double_format (gdbarch, floatformats_ibm_long_double);
+
+ /* Handle inferior calls during interrupted system calls. */
+ set_gdbarch_write_pc (gdbarch, ppc_linux_write_pc);
+
+ /* Get the syscall number from the arch's register. */
+ set_gdbarch_get_syscall_number (gdbarch, ppc_linux_get_syscall_number);
+
+ /* SystemTap functions. */
+ set_gdbarch_stap_integer_prefixes (gdbarch, stap_integer_prefixes);
+ set_gdbarch_stap_register_indirection_prefixes (gdbarch,
+ stap_register_indirection_prefixes);
+ set_gdbarch_stap_register_indirection_suffixes (gdbarch,
+ stap_register_indirection_suffixes);
+ set_gdbarch_stap_gdb_register_prefix (gdbarch, "r");
+ set_gdbarch_stap_is_single_operand (gdbarch, ppc_stap_is_single_operand);
+ set_gdbarch_stap_parse_special_token (gdbarch,
+ ppc_stap_parse_special_token);
if (tdep->wordsize == 4)
{
- /* Note: kevinb/2002-04-12: See note in rs6000_gdbarch_init regarding
- *_push_arguments(). The same remarks hold for the methods below. */
- set_gdbarch_frameless_function_invocation (gdbarch,
- ppc_linux_frameless_function_invocation);
- set_gdbarch_deprecated_frame_chain (gdbarch, ppc_linux_frame_chain);
- set_gdbarch_deprecated_frame_saved_pc (gdbarch, ppc_linux_frame_saved_pc);
-
- set_gdbarch_deprecated_frame_init_saved_regs (gdbarch,
- ppc_linux_frame_init_saved_regs);
- set_gdbarch_deprecated_init_extra_frame_info (gdbarch,
- ppc_linux_init_extra_frame_info);
+ /* Until November 2001, gcc did not comply with the 32 bit SysV
+ R4 ABI requirement that structures less than or equal to 8
+ bytes should be returned in registers. Instead GCC was using
+ the AIX/PowerOpen ABI - everything returned in memory
+ (well ignoring vectors that is). When this was corrected, it
+ wasn't fixed for GNU/Linux native platform. Use the
+ PowerOpen struct convention. */
+ set_gdbarch_return_value (gdbarch, ppc_linux_return_value);
set_gdbarch_memory_remove_breakpoint (gdbarch,
ppc_linux_memory_remove_breakpoint);
+
+ /* Shared library handling. */
+ set_gdbarch_skip_trampoline_code (gdbarch, ppc_skip_trampoline_code);
set_solib_svr4_fetch_link_map_offsets
- (gdbarch, ppc_linux_svr4_fetch_link_map_offsets);
+ (gdbarch, svr4_ilp32_fetch_link_map_offsets);
+
+ /* Setting the correct XML syscall filename. */
+ set_xml_syscall_file_name (XML_SYSCALL_FILENAME_PPC);
+
+ /* Trampolines. */
+ tramp_frame_prepend_unwinder (gdbarch,
+ &ppc32_linux_sigaction_tramp_frame);
+ tramp_frame_prepend_unwinder (gdbarch,
+ &ppc32_linux_sighandler_tramp_frame);
+
+ /* BFD target for core files. */
+ if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_LITTLE)
+ set_gdbarch_gcore_bfd_target (gdbarch, "elf32-powerpcle");
+ else
+ set_gdbarch_gcore_bfd_target (gdbarch, "elf32-powerpc");
+
+ /* Supported register sections. */
+ if (tdesc_find_feature (info.target_desc,
+ "org.gnu.gdb.power.vsx"))
+ set_gdbarch_core_regset_sections (gdbarch,
+ ppc_linux_vsx_regset_sections);
+ else if (tdesc_find_feature (info.target_desc,
+ "org.gnu.gdb.power.altivec"))
+ set_gdbarch_core_regset_sections (gdbarch,
+ ppc_linux_vmx_regset_sections);
+ else
+ set_gdbarch_core_regset_sections (gdbarch,
+ ppc_linux_fp_regset_sections);
+
+ if (powerpc_so_ops.in_dynsym_resolve_code == NULL)
+ {
+ powerpc_so_ops = svr4_so_ops;
+ /* Override dynamic resolve function. */
+ powerpc_so_ops.in_dynsym_resolve_code =
+ powerpc_linux_in_dynsym_resolve_code;
+ }
+ set_solib_ops (gdbarch, &powerpc_so_ops);
+
+ set_gdbarch_skip_solib_resolver (gdbarch, glibc_skip_solib_resolver);
}
+
+ if (tdep->wordsize == 8)
+ {
+ if (tdep->elf_abi == POWERPC_ELF_V1)
+ {
+ /* Handle PPC GNU/Linux 64-bit function pointers (which are really
+ function descriptors). */
+ set_gdbarch_convert_from_func_ptr_addr
+ (gdbarch, ppc64_convert_from_func_ptr_addr);
+
+ set_gdbarch_elf_make_msymbol_special
+ (gdbarch, ppc64_elf_make_msymbol_special);
+ }
+ else
+ {
+ set_gdbarch_elf_make_msymbol_special
+ (gdbarch, ppc_elfv2_elf_make_msymbol_special);
+
+ set_gdbarch_skip_entrypoint (gdbarch, ppc_elfv2_skip_entrypoint);
+ }
+
+ /* Shared library handling. */
+ set_gdbarch_skip_trampoline_code (gdbarch, ppc64_skip_trampoline_code);
+ set_solib_svr4_fetch_link_map_offsets
+ (gdbarch, svr4_lp64_fetch_link_map_offsets);
+
+ /* Setting the correct XML syscall filename. */
+ set_xml_syscall_file_name (XML_SYSCALL_FILENAME_PPC64);
+
+ /* Trampolines. */
+ tramp_frame_prepend_unwinder (gdbarch,
+ &ppc64_linux_sigaction_tramp_frame);
+ tramp_frame_prepend_unwinder (gdbarch,
+ &ppc64_linux_sighandler_tramp_frame);
+
+ /* BFD target for core files. */
+ if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_LITTLE)
+ set_gdbarch_gcore_bfd_target (gdbarch, "elf64-powerpcle");
+ else
+ set_gdbarch_gcore_bfd_target (gdbarch, "elf64-powerpc");
+
+ /* Supported register sections. */
+ if (tdesc_find_feature (info.target_desc,
+ "org.gnu.gdb.power.vsx"))
+ set_gdbarch_core_regset_sections (gdbarch,
+ ppc64_linux_vsx_regset_sections);
+ else if (tdesc_find_feature (info.target_desc,
+ "org.gnu.gdb.power.altivec"))
+ set_gdbarch_core_regset_sections (gdbarch,
+ ppc64_linux_vmx_regset_sections);
+ else
+ set_gdbarch_core_regset_sections (gdbarch,
+ ppc64_linux_fp_regset_sections);
+ }
+
+ /* PPC32 uses a different prpsinfo32 compared to most other Linux
+ archs. */
+ if (tdep->wordsize == 4)
+ set_gdbarch_elfcore_write_linux_prpsinfo (gdbarch,
+ elfcore_write_ppc_linux_prpsinfo32);
+
+ set_gdbarch_regset_from_core_section (gdbarch,
+ ppc_linux_regset_from_core_section);
+ set_gdbarch_core_read_description (gdbarch, ppc_linux_core_read_description);
+
+ /* Enable TLS support. */
+ set_gdbarch_fetch_tls_load_module_address (gdbarch,
+ svr4_fetch_objfile_link_map);
+
+ if (tdesc_data)
+ {
+ const struct tdesc_feature *feature;
+
+ /* If we have target-described registers, then we can safely
+ reserve a number for PPC_ORIG_R3_REGNUM and PPC_TRAP_REGNUM
+ (whether they are described or not). */
+ gdb_assert (gdbarch_num_regs (gdbarch) <= PPC_ORIG_R3_REGNUM);
+ set_gdbarch_num_regs (gdbarch, PPC_TRAP_REGNUM + 1);
+
+ /* If they are present, then assign them to the reserved number. */
+ feature = tdesc_find_feature (info.target_desc,
+ "org.gnu.gdb.power.linux");
+ if (feature != NULL)
+ {
+ tdesc_numbered_register (feature, tdesc_data,
+ PPC_ORIG_R3_REGNUM, "orig_r3");
+ tdesc_numbered_register (feature, tdesc_data,
+ PPC_TRAP_REGNUM, "trap");
+ }
+ }
+
+ /* Enable Cell/B.E. if supported by the target. */
+ if (tdesc_compatible_p (info.target_desc,
+ bfd_lookup_arch (bfd_arch_spu, bfd_mach_spu)))
+ {
+ /* Cell/B.E. multi-architecture support. */
+ set_spu_solib_ops (gdbarch);
+
+ /* Cell/B.E. cross-architecture unwinder support. */
+ frame_unwind_prepend_unwinder (gdbarch, &ppu2spu_unwind);
+
+ /* The default displaced_step_at_entry_point doesn't work for
+ SPU stand-alone executables. */
+ set_gdbarch_displaced_step_location (gdbarch,
+ ppc_linux_displaced_step_location);
+ }
+
+ set_gdbarch_get_siginfo_type (gdbarch, linux_get_siginfo_type);
}
+/* Provide a prototype to silence -Wmissing-prototypes. */
+extern initialize_file_ftype _initialize_ppc_linux_tdep;
+
void
_initialize_ppc_linux_tdep (void)
{
- gdbarch_register_osabi (bfd_arch_powerpc, 0, GDB_OSABI_LINUX,
- ppc_linux_init_abi);
- add_core_fns (&ppc_linux_regset_core_fns);
+ /* Register for all sub-familes of the POWER/PowerPC: 32-bit and
+ 64-bit PowerPC, and the older rs6k. */
+ gdbarch_register_osabi (bfd_arch_powerpc, bfd_mach_ppc, GDB_OSABI_LINUX,
+ ppc_linux_init_abi);
+ gdbarch_register_osabi (bfd_arch_powerpc, bfd_mach_ppc64, GDB_OSABI_LINUX,
+ ppc_linux_init_abi);
+ gdbarch_register_osabi (bfd_arch_rs6000, bfd_mach_rs6k, GDB_OSABI_LINUX,
+ ppc_linux_init_abi);
+
+ /* Attach to inferior_created observer. */
+ observer_attach_inferior_created (ppc_linux_inferior_created);
+
+ /* Attach to observers to track __spe_current_active_context. */
+ observer_attach_inferior_created (ppc_linux_spe_context_inferior_created);
+ observer_attach_solib_loaded (ppc_linux_spe_context_solib_loaded);
+ observer_attach_solib_unloaded (ppc_linux_spe_context_solib_unloaded);
+
+ /* Initialize the Linux target descriptions. */
+ initialize_tdesc_powerpc_32l ();
+ initialize_tdesc_powerpc_altivec32l ();
+ initialize_tdesc_powerpc_cell32l ();
+ initialize_tdesc_powerpc_vsx32l ();
+ initialize_tdesc_powerpc_isa205_32l ();
+ initialize_tdesc_powerpc_isa205_altivec32l ();
+ initialize_tdesc_powerpc_isa205_vsx32l ();
+ initialize_tdesc_powerpc_64l ();
+ initialize_tdesc_powerpc_altivec64l ();
+ initialize_tdesc_powerpc_cell64l ();
+ initialize_tdesc_powerpc_vsx64l ();
+ initialize_tdesc_powerpc_isa205_64l ();
+ initialize_tdesc_powerpc_isa205_altivec64l ();
+ initialize_tdesc_powerpc_isa205_vsx64l ();
+ initialize_tdesc_powerpc_e500l ();
}
projects / deliverable / binutils-gdb.git / blobdiff