/* Target-dependent code for GDB, the GNU debugger.
Copyright (C) 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997,
- 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
+ 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Free Software Foundation, Inc.
This file is part of GDB.
#include "arch-utils.h"
#include "spu-tdep.h"
#include "xml-syscall.h"
+#include "linux-tdep.h"
#include "features/rs6000/powerpc-32l.c"
#include "features/rs6000/powerpc-altivec32l.c"
Now we've hit the breakpoint at shr1. (The breakpoint was
reset from the PLT entry to the actual shr1 function after the
shared library was loaded.) Note that the PLT entry has been
- resolved to contain a branch that takes us directly to shr1.
+ resolved to contain a branch that takes us directly to shr1.
(The real one, not the PLT entry.)
(gdb) x/2i 0x100409d4
changed twice.
Now the problem should be obvious. GDB places a breakpoint (a
- trap instruction) on the zero value of the PLT entry for shr1.
+ trap instruction) on the zero value of the PLT entry for shr1.
Later on, after the shared library had been loaded and the PLT
initialized, GDB gets a signal indicating this fact and attempts
(as it always does when it stops) to remove all the breakpoints.
word) to be written back to the now initialized PLT entry thus
destroying a portion of the initialization that had occurred only a
short time ago. When execution continued, the zero word would be
- executed as an instruction an an illegal instruction trap was
+ executed as an instruction an illegal instruction trap was
generated instead. (0 is not a legal instruction.)
The fix for this problem was fairly straightforward. The function
that the latter does not is check to make sure that the breakpoint
location actually contains a breakpoint (trap instruction) prior
to attempting to write back the old contents. If it does contain
- a trap instruction, we allow the old contents to be written back.
+ a trap instruction, we allow the old contents to be written back.
Otherwise, we silently do nothing.
The big question is whether memory_remove_breakpoint () should be
/* If our breakpoint is no longer at the address, this means that the
program modified the code on us, so it is wrong to put back the
- old value */
+ old value. */
if (val == 0 && memcmp (bp, old_contents, bplen) == 0)
val = target_write_memory (addr, bp_tgt->shadow_contents, bplen);
/* An instruction to match. */
struct insn_pattern
{
- unsigned int mask; /* mask the insn with this... */
- unsigned int data; /* ...and see if it matches this. */
+ unsigned int mask; /* mask the insn with this... */
+ unsigned int data; /* ...and see if it matches this. */
int optional; /* If non-zero, this insn may be absent. */
};
static struct core_regset_section ppc_linux_vsx_regset_sections[] =
{
- { ".reg", 268, "general-purpose" },
+ { ".reg", 48 * 4, "general-purpose" },
{ ".reg2", 264, "floating-point" },
{ ".reg-ppc-vmx", 544, "ppc Altivec" },
{ ".reg-ppc-vsx", 256, "POWER7 VSX" },
static struct core_regset_section ppc_linux_vmx_regset_sections[] =
{
- { ".reg", 268, "general-purpose" },
+ { ".reg", 48 * 4, "general-purpose" },
{ ".reg2", 264, "floating-point" },
{ ".reg-ppc-vmx", 544, "ppc Altivec" },
{ NULL, 0}
static struct core_regset_section ppc_linux_fp_regset_sections[] =
{
- { ".reg", 268, "general-purpose" },
+ { ".reg", 48 * 4, "general-purpose" },
+ { ".reg2", 264, "floating-point" },
+ { NULL, 0}
+};
+
+static struct core_regset_section ppc64_linux_vsx_regset_sections[] =
+{
+ { ".reg", 48 * 8, "general-purpose" },
+ { ".reg2", 264, "floating-point" },
+ { ".reg-ppc-vmx", 544, "ppc Altivec" },
+ { ".reg-ppc-vsx", 256, "POWER7 VSX" },
+ { NULL, 0}
+};
+
+static struct core_regset_section ppc64_linux_vmx_regset_sections[] =
+{
+ { ".reg", 48 * 8, "general-purpose" },
+ { ".reg2", 264, "floating-point" },
+ { ".reg-ppc-vmx", 544, "ppc Altivec" },
+ { NULL, 0}
+};
+
+static struct core_regset_section ppc64_linux_fp_regset_sections[] =
+{
+ { ".reg", 48 * 8, "general-purpose" },
{ ".reg2", 264, "floating-point" },
{ NULL, 0}
};
for (i = 0; i < 32; i++)
{
int regnum = i + tdep->ppc_gp0_regnum;
- trad_frame_set_reg_addr (this_cache, regnum, gpregs + i * tdep->wordsize);
+ trad_frame_set_reg_addr (this_cache,
+ regnum, gpregs + i * tdep->wordsize);
}
trad_frame_set_reg_addr (this_cache,
gdbarch_pc_regnum (gdbarch),
{
if (strstr (so->so_original_name, "/libspe") != NULL)
{
- solib_read_symbols (so, so->from_tty ? SYMFILE_VERBOSE : 0);
+ solib_read_symbols (so, 0);
ppc_linux_spe_context_lookup (so->objfile);
}
}
static const struct frame_unwind ppu2spu_unwind = {
ARCH_FRAME,
+ default_frame_unwind_stop_reason,
ppu2spu_this_id,
ppu2spu_prev_register,
NULL,
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
struct tdesc_arch_data *tdesc_data = (void *) info.tdep_info;
+ linux_init_abi (info, gdbarch);
+
/* PPC GNU/Linux uses either 64-bit or 128-bit long doubles; where
128-bit, they are IBM long double, not IEEE quad long double as
in the System V ABI PowerPC Processor Supplement. We can safely
/* Until November 2001, gcc did not comply with the 32 bit SysV
R4 ABI requirement that structures less than or equal to 8
bytes should be returned in registers. Instead GCC was using
- the the AIX/PowerOpen ABI - everything returned in memory
+ the AIX/PowerOpen ABI - everything returned in memory
(well ignoring vectors that is). When this was corrected, it
wasn't fixed for GNU/Linux native platform. Use the
PowerOpen struct convention. */
set_xml_syscall_file_name (XML_SYSCALL_FILENAME_PPC);
/* Trampolines. */
- tramp_frame_prepend_unwinder (gdbarch, &ppc32_linux_sigaction_tramp_frame);
- tramp_frame_prepend_unwinder (gdbarch, &ppc32_linux_sighandler_tramp_frame);
+ tramp_frame_prepend_unwinder (gdbarch,
+ &ppc32_linux_sigaction_tramp_frame);
+ tramp_frame_prepend_unwinder (gdbarch,
+ &ppc32_linux_sighandler_tramp_frame);
/* BFD target for core files. */
if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_LITTLE)
set_gdbarch_gcore_bfd_target (gdbarch, "elf32-powerpcle");
else
set_gdbarch_gcore_bfd_target (gdbarch, "elf32-powerpc");
+
+ /* Supported register sections. */
+ if (tdesc_find_feature (info.target_desc,
+ "org.gnu.gdb.power.vsx"))
+ set_gdbarch_core_regset_sections (gdbarch,
+ ppc_linux_vsx_regset_sections);
+ else if (tdesc_find_feature (info.target_desc,
+ "org.gnu.gdb.power.altivec"))
+ set_gdbarch_core_regset_sections (gdbarch,
+ ppc_linux_vmx_regset_sections);
+ else
+ set_gdbarch_core_regset_sections (gdbarch,
+ ppc_linux_fp_regset_sections);
}
if (tdep->wordsize == 8)
set_xml_syscall_file_name (XML_SYSCALL_FILENAME_PPC64);
/* Trampolines. */
- tramp_frame_prepend_unwinder (gdbarch, &ppc64_linux_sigaction_tramp_frame);
- tramp_frame_prepend_unwinder (gdbarch, &ppc64_linux_sighandler_tramp_frame);
+ tramp_frame_prepend_unwinder (gdbarch,
+ &ppc64_linux_sigaction_tramp_frame);
+ tramp_frame_prepend_unwinder (gdbarch,
+ &ppc64_linux_sighandler_tramp_frame);
/* BFD target for core files. */
if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_LITTLE)
set_gdbarch_gcore_bfd_target (gdbarch, "elf64-powerpcle");
else
set_gdbarch_gcore_bfd_target (gdbarch, "elf64-powerpc");
- }
- set_gdbarch_regset_from_core_section (gdbarch, ppc_linux_regset_from_core_section);
- set_gdbarch_core_read_description (gdbarch, ppc_linux_core_read_description);
- /* Supported register sections. */
- if (tdesc_find_feature (info.target_desc,
- "org.gnu.gdb.power.vsx"))
- set_gdbarch_core_regset_sections (gdbarch, ppc_linux_vsx_regset_sections);
- else if (tdesc_find_feature (info.target_desc,
+ /* Supported register sections. */
+ if (tdesc_find_feature (info.target_desc,
+ "org.gnu.gdb.power.vsx"))
+ set_gdbarch_core_regset_sections (gdbarch,
+ ppc64_linux_vsx_regset_sections);
+ else if (tdesc_find_feature (info.target_desc,
"org.gnu.gdb.power.altivec"))
- set_gdbarch_core_regset_sections (gdbarch, ppc_linux_vmx_regset_sections);
- else
- set_gdbarch_core_regset_sections (gdbarch, ppc_linux_fp_regset_sections);
+ set_gdbarch_core_regset_sections (gdbarch,
+ ppc64_linux_vmx_regset_sections);
+ else
+ set_gdbarch_core_regset_sections (gdbarch,
+ ppc64_linux_fp_regset_sections);
+ }
+ set_gdbarch_regset_from_core_section (gdbarch,
+ ppc_linux_regset_from_core_section);
+ set_gdbarch_core_read_description (gdbarch, ppc_linux_core_read_description);
/* Enable TLS support. */
set_gdbarch_fetch_tls_load_module_address (gdbarch,
projects / deliverable / binutils-gdb.git / blobdiff