/* Print values for GNU debugger GDB.
- Copyright (C) 1986-2013 Free Software Foundation, Inc.
+ Copyright (C) 1986-2017 Free Software Foundation, Inc.
This file is part of GDB.
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
-#include "gdb_string.h"
#include "frame.h"
#include "symtab.h"
#include "gdbtypes.h"
#include "objfiles.h" /* ditto */
#include "completer.h" /* for completion functions */
#include "ui-out.h"
-#include "gdb_assert.h"
#include "block.h"
#include "disasm.h"
-#include "dfp.h"
-#include "valprint.h"
-#include "exceptions.h"
+#include "target-float.h"
#include "observer.h"
#include "solist.h"
#include "parser-defs.h"
#include "charset.h"
#include "arch-utils.h"
#include "cli/cli-utils.h"
+#include "cli/cli-script.h"
#include "format.h"
+#include "source.h"
+#include "common/byte-vector.h"
#ifdef TUI
#include "tui/tui.h" /* For tui_active et al. */
#endif
-struct format_data
- {
- int count;
- char format;
- char size;
-
- /* True if the value should be printed raw -- that is, bypassing
- python-based formatters. */
- unsigned char raw;
- };
-
/* Last specified output format. */
static char last_format = 0;
So that we can disable it if we get a signal within it.
-1 when not doing one. */
-int current_display_number;
+static int current_display_number;
struct display
{
char *exp_string;
/* Expression to be evaluated and displayed. */
- struct expression *exp;
+ expression_up exp;
/* Item number of this auto-display item. */
int number;
B ? (TMP = B->next, 1): 0; \
B = TMP)
-/* Prototypes for exported functions. */
-
-void output_command (char *, int);
-
-void _initialize_printcmd (void);
-
/* Prototypes for local functions. */
static void do_one_display (struct display *);
past the specification and past all whitespace following it. */
static struct format_data
-decode_format (char **string_ptr, int oformat, int osize)
+decode_format (const char **string_ptr, int oformat, int osize)
{
struct format_data val;
- char *p = *string_ptr;
+ const char *p = *string_ptr;
val.format = '?';
val.size = '?';
val.count = 1;
val.raw = 0;
+ if (*p == '-')
+ {
+ val.count = -1;
+ p++;
+ }
if (*p >= '0' && *p <= '9')
- val.count = atoi (p);
+ val.count *= atoi (p);
while (*p >= '0' && *p <= '9')
p++;
/* User specified format, so don't look to the type to tell us
what to do. */
val_print_scalar_formatted (type,
- value_contents_for_printing (val),
value_embedded_offset (val),
val,
options, size, stream);
supported at this level. */
void
-print_scalar_formatted (const void *valaddr, struct type *type,
+print_scalar_formatted (const gdb_byte *valaddr, struct type *type,
const struct value_print_options *options,
int size, struct ui_file *stream)
{
struct gdbarch *gdbarch = get_type_arch (type);
- LONGEST val_long = 0;
unsigned int len = TYPE_LENGTH (type);
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
/* String printing should go through val_print_scalar_formatted. */
gdb_assert (options->format != 's');
- if (len > sizeof(LONGEST) &&
- (TYPE_CODE (type) == TYPE_CODE_INT
- || TYPE_CODE (type) == TYPE_CODE_ENUM))
- {
- switch (options->format)
- {
- case 'o':
- print_octal_chars (stream, valaddr, len, byte_order);
- return;
- case 'u':
- case 'd':
- print_decimal_chars (stream, valaddr, len, byte_order);
- return;
- case 't':
- print_binary_chars (stream, valaddr, len, byte_order);
- return;
- case 'x':
- print_hex_chars (stream, valaddr, len, byte_order);
- return;
- case 'c':
- print_char_chars (stream, type, valaddr, len, byte_order);
- return;
- default:
- break;
- };
- }
-
- if (options->format != 'f')
- val_long = unpack_long (type, valaddr);
-
/* If the value is a pointer, and pointers and addresses are not the
same, then at this point, the value's length (in target bytes) is
gdbarch_addr_bit/TARGET_CHAR_BIT, not TYPE_LENGTH (type). */
/* If we are printing it as unsigned, truncate it in case it is actually
a negative signed value (e.g. "print/u (short)-1" should print 65535
(if shorts are 16 bits) instead of 4294967295). */
- if (options->format != 'd' || TYPE_UNSIGNED (type))
+ if (options->format != 'c'
+ && (options->format != 'd' || TYPE_UNSIGNED (type)))
{
- if (len < sizeof (LONGEST))
- val_long &= ((LONGEST) 1 << HOST_CHAR_BIT * len) - 1;
+ if (len < TYPE_LENGTH (type) && byte_order == BFD_ENDIAN_BIG)
+ valaddr += TYPE_LENGTH (type) - len;
}
- switch (options->format)
+ if (size != 0 && (options->format == 'x' || options->format == 't'))
{
- case 'x':
- if (!size)
+ /* Truncate to fit. */
+ unsigned newlen;
+ switch (size)
{
- /* No size specified, like in print. Print varying # of digits. */
- print_longest (stream, 'x', 1, val_long);
+ case 'b':
+ newlen = 1;
+ break;
+ case 'h':
+ newlen = 2;
+ break;
+ case 'w':
+ newlen = 4;
+ break;
+ case 'g':
+ newlen = 8;
+ break;
+ default:
+ error (_("Undefined output size \"%c\"."), size);
}
- else
- switch (size)
- {
- case 'b':
- case 'h':
- case 'w':
- case 'g':
- print_longest (stream, size, 1, val_long);
- break;
- default:
- error (_("Undefined output size \"%c\"."), size);
- }
- break;
+ if (newlen < len && byte_order == BFD_ENDIAN_BIG)
+ valaddr += len - newlen;
+ len = newlen;
+ }
+
+ /* Historically gdb has printed floats by first casting them to a
+ long, and then printing the long. PR cli/16242 suggests changing
+ this to using C-style hex float format. */
+ gdb::byte_vector converted_float_bytes;
+ if (TYPE_CODE (type) == TYPE_CODE_FLT
+ && (options->format == 'o'
+ || options->format == 'x'
+ || options->format == 't'
+ || options->format == 'z'
+ || options->format == 'd'
+ || options->format == 'u'))
+ {
+ LONGEST val_long = unpack_long (type, valaddr);
+ converted_float_bytes.resize (TYPE_LENGTH (type));
+ store_signed_integer (converted_float_bytes.data (), TYPE_LENGTH (type),
+ byte_order, val_long);
+ valaddr = converted_float_bytes.data ();
+ }
+ /* Printing a non-float type as 'f' will interpret the data as if it were
+ of a floating-point type of the same length, if that exists. Otherwise,
+ the data is printed as integer. */
+ char format = options->format;
+ if (format == 'f' && TYPE_CODE (type) != TYPE_CODE_FLT)
+ {
+ type = float_type_from_length (type);
+ if (TYPE_CODE (type) != TYPE_CODE_FLT)
+ format = 0;
+ }
+
+ switch (format)
+ {
+ case 'o':
+ print_octal_chars (stream, valaddr, len, byte_order);
+ break;
case 'd':
- print_longest (stream, 'd', 1, val_long);
+ print_decimal_chars (stream, valaddr, len, true, byte_order);
break;
-
case 'u':
- print_longest (stream, 'u', 0, val_long);
+ print_decimal_chars (stream, valaddr, len, false, byte_order);
break;
-
- case 'o':
- if (val_long)
- print_longest (stream, 'o', 1, val_long);
- else
- fprintf_filtered (stream, "0");
+ case 0:
+ if (TYPE_CODE (type) != TYPE_CODE_FLT)
+ {
+ print_decimal_chars (stream, valaddr, len, !TYPE_UNSIGNED (type),
+ byte_order);
+ break;
+ }
+ /* FALLTHROUGH */
+ case 'f':
+ print_floating (valaddr, type, stream);
break;
- case 'a':
- {
- CORE_ADDR addr = unpack_pointer (type, valaddr);
-
- print_address (gdbarch, addr, stream);
- }
+ case 't':
+ print_binary_chars (stream, valaddr, len, byte_order, size > 0);
+ break;
+ case 'x':
+ print_hex_chars (stream, valaddr, len, byte_order, size > 0);
+ break;
+ case 'z':
+ print_hex_chars (stream, valaddr, len, byte_order, true);
break;
-
case 'c':
{
struct value_print_options opts = *options;
+ LONGEST val_long = unpack_long (type, valaddr);
+
opts.format = 0;
if (TYPE_UNSIGNED (type))
type = builtin_type (gdbarch)->builtin_true_unsigned_char;
}
break;
- case 'f':
- type = float_type_from_length (type);
- print_floating (valaddr, type, stream);
- break;
-
- case 0:
- internal_error (__FILE__, __LINE__,
- _("failed internal consistency check"));
-
- case 't':
- /* Binary; 't' stands for "two". */
+ case 'a':
{
- char bits[8 * (sizeof val_long) + 1];
- char buf[8 * (sizeof val_long) + 32];
- char *cp = bits;
- int width;
-
- if (!size)
- width = 8 * (sizeof val_long);
- else
- switch (size)
- {
- case 'b':
- width = 8;
- break;
- case 'h':
- width = 16;
- break;
- case 'w':
- width = 32;
- break;
- case 'g':
- width = 64;
- break;
- default:
- error (_("Undefined output size \"%c\"."), size);
- }
+ CORE_ADDR addr = unpack_pointer (type, valaddr);
- bits[width] = '\0';
- while (width-- > 0)
- {
- bits[width] = (val_long & 1) ? '1' : '0';
- val_long >>= 1;
- }
- if (!size)
- {
- while (*cp && *cp == '0')
- cp++;
- if (*cp == '\0')
- cp--;
- }
- strncpy (buf, cp, sizeof (bits));
- fputs_filtered (buf, stream);
+ print_address (gdbarch, addr, stream);
}
break;
default:
- error (_("Undefined output format \"%c\"."), options->format);
+ error (_("Undefined output format \"%c\"."), format);
}
}
int
print_address_symbolic (struct gdbarch *gdbarch, CORE_ADDR addr,
struct ui_file *stream,
- int do_demangle, char *leadin)
+ int do_demangle, const char *leadin)
{
char *name = NULL;
char *filename = NULL;
int *line, /* OUT */
int *unmapped) /* OUT */
{
- struct minimal_symbol *msymbol;
+ struct bound_minimal_symbol msymbol;
struct symbol *symbol;
CORE_ADDR name_location = 0;
struct obj_section *section = NULL;
name_temp = SYMBOL_LINKAGE_NAME (symbol);
}
- if (msymbol != NULL
- && MSYMBOL_HAS_SIZE (msymbol)
- && MSYMBOL_SIZE (msymbol) == 0
- && MSYMBOL_TYPE (msymbol) != mst_text
- && MSYMBOL_TYPE (msymbol) != mst_text_gnu_ifunc
- && MSYMBOL_TYPE (msymbol) != mst_file_text)
- msymbol = NULL;
+ if (msymbol.minsym != NULL
+ && MSYMBOL_HAS_SIZE (msymbol.minsym)
+ && MSYMBOL_SIZE (msymbol.minsym) == 0
+ && MSYMBOL_TYPE (msymbol.minsym) != mst_text
+ && MSYMBOL_TYPE (msymbol.minsym) != mst_text_gnu_ifunc
+ && MSYMBOL_TYPE (msymbol.minsym) != mst_file_text)
+ msymbol.minsym = NULL;
- if (msymbol != NULL)
+ if (msymbol.minsym != NULL)
{
- if (SYMBOL_VALUE_ADDRESS (msymbol) > name_location || symbol == NULL)
+ if (BMSYMBOL_VALUE_ADDRESS (msymbol) > name_location || symbol == NULL)
{
+ /* If this is a function (i.e. a code address), strip out any
+ non-address bits. For instance, display a pointer to the
+ first instruction of a Thumb function as <function>; the
+ second instruction will be <function+2>, even though the
+ pointer is <function+3>. This matches the ISA behavior. */
+ if (MSYMBOL_TYPE (msymbol.minsym) == mst_text
+ || MSYMBOL_TYPE (msymbol.minsym) == mst_text_gnu_ifunc
+ || MSYMBOL_TYPE (msymbol.minsym) == mst_file_text
+ || MSYMBOL_TYPE (msymbol.minsym) == mst_solib_trampoline)
+ addr = gdbarch_addr_bits_remove (gdbarch, addr);
+
/* The msymbol is closer to the address than the symbol;
use the msymbol instead. */
symbol = 0;
- name_location = SYMBOL_VALUE_ADDRESS (msymbol);
+ name_location = BMSYMBOL_VALUE_ADDRESS (msymbol);
if (do_demangle || asm_demangle)
- name_temp = SYMBOL_PRINT_NAME (msymbol);
+ name_temp = MSYMBOL_PRINT_NAME (msymbol.minsym);
else
- name_temp = SYMBOL_LINKAGE_NAME (msymbol);
+ name_temp = MSYMBOL_LINKAGE_NAME (msymbol.minsym);
}
}
- if (symbol == NULL && msymbol == NULL)
+ if (symbol == NULL && msymbol.minsym == NULL)
return 1;
/* If the nearest symbol is too far away, don't print anything symbolic. */
if (sal.symtab)
{
- *filename = xstrdup (sal.symtab->filename);
+ *filename = xstrdup (symtab_to_filename_for_display (sal.symtab));
*line = sal.line;
}
}
}
\f
+/* Find the address of the instruction that is INST_COUNT instructions before
+ the instruction at ADDR.
+ Since some architectures have variable-length instructions, we can't just
+ simply subtract INST_COUNT * INSN_LEN from ADDR. Instead, we use line
+ number information to locate the nearest known instruction boundary,
+ and disassemble forward from there. If we go out of the symbol range
+ during disassembling, we return the lowest address we've got so far and
+ set the number of instructions read to INST_READ. */
+
+static CORE_ADDR
+find_instruction_backward (struct gdbarch *gdbarch, CORE_ADDR addr,
+ int inst_count, int *inst_read)
+{
+ /* The vector PCS is used to store instruction addresses within
+ a pc range. */
+ CORE_ADDR loop_start, loop_end, p;
+ std::vector<CORE_ADDR> pcs;
+ struct symtab_and_line sal;
+
+ *inst_read = 0;
+ loop_start = loop_end = addr;
+
+ /* In each iteration of the outer loop, we get a pc range that ends before
+ LOOP_START, then we count and store every instruction address of the range
+ iterated in the loop.
+ If the number of instructions counted reaches INST_COUNT, return the
+ stored address that is located INST_COUNT instructions back from ADDR.
+ If INST_COUNT is not reached, we subtract the number of counted
+ instructions from INST_COUNT, and go to the next iteration. */
+ do
+ {
+ pcs.clear ();
+ sal = find_pc_sect_line (loop_start, NULL, 1);
+ if (sal.line <= 0)
+ {
+ /* We reach here when line info is not available. In this case,
+ we print a message and just exit the loop. The return value
+ is calculated after the loop. */
+ printf_filtered (_("No line number information available "
+ "for address "));
+ wrap_here (" ");
+ print_address (gdbarch, loop_start - 1, gdb_stdout);
+ printf_filtered ("\n");
+ break;
+ }
+
+ loop_end = loop_start;
+ loop_start = sal.pc;
+
+ /* This loop pushes instruction addresses in the range from
+ LOOP_START to LOOP_END. */
+ for (p = loop_start; p < loop_end;)
+ {
+ pcs.push_back (p);
+ p += gdb_insn_length (gdbarch, p);
+ }
+
+ inst_count -= pcs.size ();
+ *inst_read += pcs.size ();
+ }
+ while (inst_count > 0);
+
+ /* After the loop, the vector PCS has instruction addresses of the last
+ source line we processed, and INST_COUNT has a negative value.
+ We return the address at the index of -INST_COUNT in the vector for
+ the reason below.
+ Let's assume the following instruction addresses and run 'x/-4i 0x400e'.
+ Line X of File
+ 0x4000
+ 0x4001
+ 0x4005
+ Line Y of File
+ 0x4009
+ 0x400c
+ => 0x400e
+ 0x4011
+ find_instruction_backward is called with INST_COUNT = 4 and expected to
+ return 0x4001. When we reach here, INST_COUNT is set to -1 because
+ it was subtracted by 2 (from Line Y) and 3 (from Line X). The value
+ 4001 is located at the index 1 of the last iterated line (= Line X),
+ which is simply calculated by -INST_COUNT.
+ The case when the length of PCS is 0 means that we reached an area for
+ which line info is not available. In such case, we return LOOP_START,
+ which was the lowest instruction address that had line info. */
+ p = pcs.size () > 0 ? pcs[-inst_count] : loop_start;
+
+ /* INST_READ includes all instruction addresses in a pc range. Need to
+ exclude the beginning part up to the address we're returning. That
+ is, exclude {0x4000} in the example above. */
+ if (inst_count < 0)
+ *inst_read += inst_count;
+
+ return p;
+}
+
+/* Backward read LEN bytes of target memory from address MEMADDR + LEN,
+ placing the results in GDB's memory from MYADDR + LEN. Returns
+ a count of the bytes actually read. */
+
+static int
+read_memory_backward (struct gdbarch *gdbarch,
+ CORE_ADDR memaddr, gdb_byte *myaddr, int len)
+{
+ int errcode;
+ int nread; /* Number of bytes actually read. */
+
+ /* First try a complete read. */
+ errcode = target_read_memory (memaddr, myaddr, len);
+ if (errcode == 0)
+ {
+ /* Got it all. */
+ nread = len;
+ }
+ else
+ {
+ /* Loop, reading one byte at a time until we get as much as we can. */
+ memaddr += len;
+ myaddr += len;
+ for (nread = 0; nread < len; ++nread)
+ {
+ errcode = target_read_memory (--memaddr, --myaddr, 1);
+ if (errcode != 0)
+ {
+ /* The read was unsuccessful, so exit the loop. */
+ printf_filtered (_("Cannot access memory at address %s\n"),
+ paddress (gdbarch, memaddr));
+ break;
+ }
+ }
+ }
+ return nread;
+}
+
+/* Returns true if X (which is LEN bytes wide) is the number zero. */
+
+static int
+integer_is_zero (const gdb_byte *x, int len)
+{
+ int i = 0;
+
+ while (i < len && x[i] == 0)
+ ++i;
+ return (i == len);
+}
+
+/* Find the start address of a string in which ADDR is included.
+ Basically we search for '\0' and return the next address,
+ but if OPTIONS->PRINT_MAX is smaller than the length of a string,
+ we stop searching and return the address to print characters as many as
+ PRINT_MAX from the string. */
+
+static CORE_ADDR
+find_string_backward (struct gdbarch *gdbarch,
+ CORE_ADDR addr, int count, int char_size,
+ const struct value_print_options *options,
+ int *strings_counted)
+{
+ const int chunk_size = 0x20;
+ int read_error = 0;
+ int chars_read = 0;
+ int chars_to_read = chunk_size;
+ int chars_counted = 0;
+ int count_original = count;
+ CORE_ADDR string_start_addr = addr;
+
+ gdb_assert (char_size == 1 || char_size == 2 || char_size == 4);
+ gdb::byte_vector buffer (chars_to_read * char_size);
+ while (count > 0 && read_error == 0)
+ {
+ int i;
+
+ addr -= chars_to_read * char_size;
+ chars_read = read_memory_backward (gdbarch, addr, buffer.data (),
+ chars_to_read * char_size);
+ chars_read /= char_size;
+ read_error = (chars_read == chars_to_read) ? 0 : 1;
+ /* Searching for '\0' from the end of buffer in backward direction. */
+ for (i = 0; i < chars_read && count > 0 ; ++i, ++chars_counted)
+ {
+ int offset = (chars_to_read - i - 1) * char_size;
+
+ if (integer_is_zero (&buffer[offset], char_size)
+ || chars_counted == options->print_max)
+ {
+ /* Found '\0' or reached print_max. As OFFSET is the offset to
+ '\0', we add CHAR_SIZE to return the start address of
+ a string. */
+ --count;
+ string_start_addr = addr + offset + char_size;
+ chars_counted = 0;
+ }
+ }
+ }
+
+ /* Update STRINGS_COUNTED with the actual number of loaded strings. */
+ *strings_counted = count_original - count;
+
+ if (read_error != 0)
+ {
+ /* In error case, STRING_START_ADDR is pointing to the string that
+ was last successfully loaded. Rewind the partially loaded string. */
+ string_start_addr -= chars_counted * char_size;
+ }
+
+ return string_start_addr;
+}
+
/* Examine data at address ADDR in format FMT.
Fetch it from memory and print on gdb_stdout. */
int i;
int maxelts;
struct value_print_options opts;
+ int need_to_update_next_address = 0;
+ CORE_ADDR addr_rewound = 0;
format = fmt.format;
size = fmt.size;
get_formatted_print_options (&opts, format);
+ if (count < 0)
+ {
+ /* This is the negative repeat count case.
+ We rewind the address based on the given repeat count and format,
+ then examine memory from there in forward direction. */
+
+ count = -count;
+ if (format == 'i')
+ {
+ next_address = find_instruction_backward (gdbarch, addr, count,
+ &count);
+ }
+ else if (format == 's')
+ {
+ next_address = find_string_backward (gdbarch, addr, count,
+ TYPE_LENGTH (val_type),
+ &opts, &count);
+ }
+ else
+ {
+ next_address = addr - count * TYPE_LENGTH (val_type);
+ }
+
+ /* The following call to print_formatted updates next_address in every
+ iteration. In backward case, we store the start address here
+ and update next_address with it before exiting the function. */
+ addr_rewound = (format == 's'
+ ? next_address - TYPE_LENGTH (val_type)
+ : next_address);
+ need_to_update_next_address = 1;
+ }
+
/* Print as many objects as specified in COUNT, at most maxelts per line,
with the address of the next one at the start of each line. */
printf_filtered ("\n");
gdb_flush (gdb_stdout);
}
+
+ if (need_to_update_next_address)
+ next_address = addr_rewound;
}
\f
static void
-validate_format (struct format_data fmt, char *cmdname)
+validate_format (struct format_data fmt, const char *cmdname)
{
if (fmt.size != 0)
error (_("Size letters are meaningless in \"%s\" command."), cmdname);
fmt.format, cmdname);
}
-/* Evaluate string EXP as an expression in the current language and
- print the resulting value. EXP may contain a format specifier as the
- first argument ("/x myvar" for example, to print myvar in hex). */
+/* Parse print command format string into *FMTP and update *EXPP.
+ CMDNAME should name the current command. */
-static void
-print_command_1 (char *exp, int inspect, int voidprint)
+void
+print_command_parse_format (const char **expp, const char *cmdname,
+ struct format_data *fmtp)
{
- struct expression *expr;
- struct cleanup *old_chain = 0;
- char format = 0;
- struct value *val;
- struct format_data fmt;
- int cleanup = 0;
+ const char *exp = *expp;
if (exp && *exp == '/')
{
exp++;
- fmt = decode_format (&exp, last_format, 0);
- validate_format (fmt, "print");
- last_format = format = fmt.format;
+ *fmtp = decode_format (&exp, last_format, 0);
+ validate_format (*fmtp, cmdname);
+ last_format = fmtp->format;
}
else
{
- fmt.count = 1;
- fmt.format = 0;
- fmt.size = 0;
- fmt.raw = 0;
+ fmtp->count = 1;
+ fmtp->format = 0;
+ fmtp->size = 0;
+ fmtp->raw = 0;
}
- if (exp && *exp)
- {
- expr = parse_expression (exp);
- old_chain = make_cleanup (free_current_contents, &expr);
- cleanup = 1;
- val = evaluate_expression (expr);
- }
- else
- val = access_value_history (0);
+ *expp = exp;
+}
- if (voidprint || (val && value_type (val) &&
- TYPE_CODE (value_type (val)) != TYPE_CODE_VOID))
- {
- struct value_print_options opts;
- int histindex = record_latest_value (val);
+/* Print VAL to console according to *FMTP, including recording it to
+ the history. */
- if (histindex >= 0)
- annotate_value_history_begin (histindex, value_type (val));
- else
- annotate_value_begin (value_type (val));
+void
+print_value (struct value *val, const struct format_data *fmtp)
+{
+ struct value_print_options opts;
+ int histindex = record_latest_value (val);
- if (inspect)
- printf_unfiltered ("\031(gdb-makebuffer \"%s\" %d '(\"",
- exp, histindex);
- else if (histindex >= 0)
- printf_filtered ("$%d = ", histindex);
+ annotate_value_history_begin (histindex, value_type (val));
- if (histindex >= 0)
- annotate_value_history_value ();
+ printf_filtered ("$%d = ", histindex);
- get_formatted_print_options (&opts, format);
- opts.inspect_it = inspect;
- opts.raw = fmt.raw;
+ annotate_value_history_value ();
- print_formatted (val, fmt.size, &opts, gdb_stdout);
- printf_filtered ("\n");
+ get_formatted_print_options (&opts, fmtp->format);
+ opts.raw = fmtp->raw;
- if (histindex >= 0)
- annotate_value_history_end ();
- else
- annotate_value_end ();
+ print_formatted (val, fmtp->size, &opts, gdb_stdout);
+ printf_filtered ("\n");
+
+ annotate_value_history_end ();
+}
- if (inspect)
- printf_unfiltered ("\") )\030");
+/* Evaluate string EXP as an expression in the current language and
+ print the resulting value. EXP may contain a format specifier as the
+ first argument ("/x myvar" for example, to print myvar in hex). */
+
+static void
+print_command_1 (const char *exp, int voidprint)
+{
+ struct value *val;
+ struct format_data fmt;
+
+ print_command_parse_format (&exp, "print", &fmt);
+
+ if (exp && *exp)
+ {
+ expression_up expr = parse_expression (exp);
+ val = evaluate_expression (expr.get ());
}
+ else
+ val = access_value_history (0);
- if (cleanup)
- do_cleanups (old_chain);
+ if (voidprint || (val && value_type (val) &&
+ TYPE_CODE (value_type (val)) != TYPE_CODE_VOID))
+ print_value (val, &fmt);
}
static void
-print_command (char *exp, int from_tty)
+print_command (const char *exp, int from_tty)
{
- print_command_1 (exp, 0, 1);
+ print_command_1 (exp, 1);
}
-/* Same as print, except in epoch, it gets its own window. */
+/* Same as print, except it doesn't print void results. */
static void
-inspect_command (char *exp, int from_tty)
+call_command (const char *exp, int from_tty)
{
- extern int epoch_interface;
-
- print_command_1 (exp, epoch_interface, 1);
+ print_command_1 (exp, 0);
}
-/* Same as print, except it doesn't print void results. */
+/* Implementation of the "output" command. */
+
static void
-call_command (char *exp, int from_tty)
+output_command (const char *exp, int from_tty)
{
- print_command_1 (exp, 0, 0);
+ output_command_const (exp, from_tty);
}
+/* Like output_command, but takes a const string as argument. */
+
void
-output_command (char *exp, int from_tty)
+output_command_const (const char *exp, int from_tty)
{
- struct expression *expr;
- struct cleanup *old_chain;
char format = 0;
struct value *val;
struct format_data fmt;
format = fmt.format;
}
- expr = parse_expression (exp);
- old_chain = make_cleanup (free_current_contents, &expr);
+ expression_up expr = parse_expression (exp);
- val = evaluate_expression (expr);
+ val = evaluate_expression (expr.get ());
annotate_value_begin (value_type (val));
wrap_here ("");
gdb_flush (gdb_stdout);
-
- do_cleanups (old_chain);
}
static void
-set_command (char *exp, int from_tty)
+set_command (const char *exp, int from_tty)
{
- struct expression *expr = parse_expression (exp);
- struct cleanup *old_chain =
- make_cleanup (free_current_contents, &expr);
+ expression_up expr = parse_expression (exp);
if (expr->nelts >= 1)
switch (expr->elts[0].opcode)
(_("Expression is not an assignment (and might have no effect)"));
}
- evaluate_expression (expr);
- do_cleanups (old_chain);
+ evaluate_expression (expr.get ());
}
static void
-sym_info (char *arg, int from_tty)
+info_symbol_command (char *arg, int from_tty)
{
struct minimal_symbol *msymbol;
struct objfile *objfile;
if (obj_section_addr (osect) <= sect_addr
&& sect_addr < obj_section_endaddr (osect)
- && (msymbol = lookup_minimal_symbol_by_pc_section (sect_addr, osect)))
+ && (msymbol
+ = lookup_minimal_symbol_by_pc_section (sect_addr, osect).minsym))
{
const char *obj_name, *mapped, *sec_name, *msym_name;
- char *loc_string;
+ const char *loc_string;
struct cleanup *old_chain;
matches = 1;
- offset = sect_addr - SYMBOL_VALUE_ADDRESS (msymbol);
+ offset = sect_addr - MSYMBOL_VALUE_ADDRESS (objfile, msymbol);
mapped = section_is_mapped (osect) ? _("mapped") : _("unmapped");
sec_name = osect->the_bfd_section->name;
- msym_name = SYMBOL_PRINT_NAME (msymbol);
+ msym_name = MSYMBOL_PRINT_NAME (msymbol);
/* Don't print the offset if it is zero.
We assume there's no need to handle i18n of "sym + offset". */
+ std::string string_holder;
if (offset)
- loc_string = xstrprintf ("%s + %u", msym_name, offset);
+ {
+ string_holder = string_printf ("%s + %u", msym_name, offset);
+ loc_string = string_holder.c_str ();
+ }
else
- loc_string = xstrprintf ("%s", msym_name);
+ loc_string = msym_name;
- /* Use a cleanup to free loc_string in case the user quits
- a pagination request inside printf_filtered. */
- old_chain = make_cleanup (xfree, loc_string);
-
- gdb_assert (osect->objfile && osect->objfile->name);
- obj_name = osect->objfile->name;
+ gdb_assert (osect->objfile && objfile_name (osect->objfile));
+ obj_name = objfile_name (osect->objfile);
if (MULTI_OBJFILE_P ())
if (pc_in_unmapped_range (addr, osect))
else
printf_filtered (_("%s in section %s\n"),
loc_string, sec_name);
-
- do_cleanups (old_chain);
}
}
if (matches == 0)
}
static void
-address_info (char *exp, int from_tty)
+info_address_command (char *exp, int from_tty)
{
struct gdbarch *gdbarch;
int regno;
struct symbol *sym;
- struct minimal_symbol *msymbol;
+ struct bound_minimal_symbol msymbol;
long val;
struct obj_section *section;
CORE_ADDR load_addr, context_pc = 0;
error (_("Argument required."));
sym = lookup_symbol (exp, get_selected_block (&context_pc), VAR_DOMAIN,
- &is_a_field_of_this);
+ &is_a_field_of_this).symbol;
if (sym == NULL)
{
if (is_a_field_of_this.type != NULL)
return;
}
- msymbol = lookup_minimal_symbol (exp, NULL, NULL);
+ msymbol = lookup_bound_minimal_symbol (exp);
- if (msymbol != NULL)
+ if (msymbol.minsym != NULL)
{
- gdbarch = get_objfile_arch (msymbol_objfile (msymbol));
- load_addr = SYMBOL_VALUE_ADDRESS (msymbol);
+ struct objfile *objfile = msymbol.objfile;
+
+ gdbarch = get_objfile_arch (objfile);
+ load_addr = BMSYMBOL_VALUE_ADDRESS (msymbol);
printf_filtered ("Symbol \"");
fprintf_symbol_filtered (gdb_stdout, exp,
printf_filtered ("\" is at ");
fputs_filtered (paddress (gdbarch, load_addr), gdb_stdout);
printf_filtered (" in a file compiled without debugging");
- section = SYMBOL_OBJ_SECTION (msymbol);
+ section = MSYMBOL_OBJ_SECTION (objfile, msymbol.minsym);
if (section_is_overlay (section))
{
load_addr = overlay_unmapped_address (load_addr, section);
current_language->la_language, DMGL_ANSI);
printf_filtered ("\" is ");
val = SYMBOL_VALUE (sym);
- section = SYMBOL_OBJ_SECTION (sym);
- gdbarch = get_objfile_arch (SYMBOL_SYMTAB (sym)->objfile);
+ if (SYMBOL_OBJFILE_OWNED (sym))
+ section = SYMBOL_OBJ_SECTION (symbol_objfile (sym), sym);
+ else
+ section = NULL;
+ gdbarch = symbol_arch (sym);
+
+ if (SYMBOL_COMPUTED_OPS (sym) != NULL)
+ {
+ SYMBOL_COMPUTED_OPS (sym)->describe_location (sym, context_pc,
+ gdb_stdout);
+ printf_filtered (".\n");
+ return;
+ }
switch (SYMBOL_CLASS (sym))
{
break;
case LOC_COMPUTED:
- /* FIXME: cagney/2004-01-26: It should be possible to
- unconditionally call the SYMBOL_COMPUTED_OPS method when available.
- Unfortunately DWARF 2 stores the frame-base (instead of the
- function) location in a function's symbol. Oops! For the
- moment enable this when/where applicable. */
- SYMBOL_COMPUTED_OPS (sym)->describe_location (sym, context_pc,
- gdb_stdout);
- break;
+ gdb_assert_not_reached (_("LOC_COMPUTED variable missing a method"));
case LOC_REGISTER:
/* GDBARCH is the architecture associated with the objfile the symbol
case LOC_UNRESOLVED:
{
- struct minimal_symbol *msym;
+ struct bound_minimal_symbol msym;
- msym = lookup_minimal_symbol (SYMBOL_LINKAGE_NAME (sym), NULL, NULL);
- if (msym == NULL)
+ msym = lookup_minimal_symbol_and_objfile (SYMBOL_LINKAGE_NAME (sym));
+ if (msym.minsym == NULL)
printf_filtered ("unresolved");
else
{
- section = SYMBOL_OBJ_SECTION (msym);
- load_addr = SYMBOL_VALUE_ADDRESS (msym);
+ section = MSYMBOL_OBJ_SECTION (msym.objfile, msym.minsym);
if (section
&& (section->the_bfd_section->flags & SEC_THREAD_LOCAL) != 0)
- printf_filtered (_("a thread-local variable at offset %s "
- "in the thread-local storage for `%s'"),
- paddress (gdbarch, load_addr),
- section->objfile->name);
+ {
+ load_addr = MSYMBOL_VALUE_RAW_ADDRESS (msym.minsym);
+ printf_filtered (_("a thread-local variable at offset %s "
+ "in the thread-local storage for `%s'"),
+ paddress (gdbarch, load_addr),
+ objfile_name (section->objfile));
+ }
else
{
+ load_addr = BMSYMBOL_VALUE_ADDRESS (msym);
printf_filtered (_("static storage at address "));
fputs_filtered (paddress (gdbarch, load_addr), gdb_stdout);
if (section_is_overlay (section))
\f
static void
-x_command (char *exp, int from_tty)
+x_command (const char *exp, int from_tty)
{
- struct expression *expr;
struct format_data fmt;
- struct cleanup *old_chain;
struct value *val;
fmt.format = last_format ? last_format : 'x';
if (exp && *exp == '/')
{
- exp++;
- fmt = decode_format (&exp, last_format, last_size);
+ const char *tmp = exp + 1;
+
+ fmt = decode_format (&tmp, last_format, last_size);
+ exp = (char *) tmp;
}
/* If we have an expression, evaluate it and use it as the address. */
if (exp != 0 && *exp != 0)
{
- expr = parse_expression (exp);
+ expression_up expr = parse_expression (exp);
/* Cause expression not to be there any more if this command is
repeated with Newline. But don't clobber a user-defined
command's definition. */
if (from_tty)
- *exp = 0;
- old_chain = make_cleanup (free_current_contents, &expr);
- val = evaluate_expression (expr);
- if (TYPE_CODE (value_type (val)) == TYPE_CODE_REF)
+ set_repeat_arguments ("");
+ val = evaluate_expression (expr.get ());
+ if (TYPE_IS_REFERENCE (value_type (val)))
val = coerce_ref (val);
/* In rvalue contexts, such as this, functions are coerced into
pointers to functions. This makes "x/i main" work. */
next_address = value_as_address (val);
next_gdbarch = expr->gdbarch;
- do_cleanups (old_chain);
}
if (!next_gdbarch)
Specify the expression. */
static void
-display_command (char *exp, int from_tty)
+display_command (const char *arg, int from_tty)
{
struct format_data fmt;
- struct expression *expr;
- struct display *new;
- int display_it = 1;
-
-#if defined(TUI)
- /* NOTE: cagney/2003-02-13 The `tui_active' was previously
- `tui_version'. */
- if (tui_active && exp != NULL && *exp == '$')
- display_it = (tui_set_layout_for_display_command (exp) == TUI_FAILURE);
-#endif
+ struct display *newobj;
+ const char *exp = arg;
- if (display_it)
+ if (exp == 0)
{
- if (exp == 0)
- {
- do_displays ();
- return;
- }
+ do_displays ();
+ return;
+ }
- if (*exp == '/')
- {
- exp++;
- fmt = decode_format (&exp, 0, 0);
- if (fmt.size && fmt.format == 0)
- fmt.format = 'x';
- if (fmt.format == 'i' || fmt.format == 's')
- fmt.size = 'b';
- }
- else
- {
- fmt.format = 0;
- fmt.size = 0;
- fmt.count = 0;
- fmt.raw = 0;
- }
+ if (*exp == '/')
+ {
+ exp++;
+ fmt = decode_format (&exp, 0, 0);
+ if (fmt.size && fmt.format == 0)
+ fmt.format = 'x';
+ if (fmt.format == 'i' || fmt.format == 's')
+ fmt.size = 'b';
+ }
+ else
+ {
+ fmt.format = 0;
+ fmt.size = 0;
+ fmt.count = 0;
+ fmt.raw = 0;
+ }
- innermost_block = NULL;
- expr = parse_expression (exp);
+ innermost_block = NULL;
+ expression_up expr = parse_expression (exp);
- new = (struct display *) xmalloc (sizeof (struct display));
+ newobj = new display ();
- new->exp_string = xstrdup (exp);
- new->exp = expr;
- new->block = innermost_block;
- new->pspace = current_program_space;
- new->next = display_chain;
- new->number = ++display_number;
- new->format = fmt;
- new->enabled_p = 1;
- display_chain = new;
+ newobj->exp_string = xstrdup (exp);
+ newobj->exp = std::move (expr);
+ newobj->block = innermost_block;
+ newobj->pspace = current_program_space;
+ newobj->number = ++display_number;
+ newobj->format = fmt;
+ newobj->enabled_p = 1;
+ newobj->next = NULL;
- if (from_tty && target_has_execution)
- do_one_display (new);
+ if (display_chain == NULL)
+ display_chain = newobj;
+ else
+ {
+ struct display *last;
- dont_repeat ();
+ for (last = display_chain; last->next != NULL; last = last->next)
+ ;
+ last->next = newobj;
}
+
+ if (from_tty)
+ do_one_display (newobj);
+
+ dont_repeat ();
}
static void
free_display (struct display *d)
{
xfree (d->exp_string);
- xfree (d->exp);
- xfree (d);
+ delete d;
}
/* Clear out the display_chain. Done when new symtabs are loaded,
ARGS. DATA is passed unmodified to FUNCTION. */
static void
-map_display_numbers (char *args,
+map_display_numbers (const char *args,
void (*function) (struct display *,
void *),
void *data)
{
- struct get_number_or_range_state state;
int num;
if (args == NULL)
error_no_arg (_("one or more display numbers"));
- init_number_or_range (&state, args);
+ number_or_range_parser parser (args);
- while (!state.finished)
+ while (!parser.finished ())
{
- char *p = state.string;
+ const char *p = parser.cur_tok ();
- num = get_number_or_range (&state);
+ num = parser.get_number ();
if (num == 0)
warning (_("bad display number at or near '%s'"), p);
else
/* "undisplay" command. */
static void
-undisplay_command (char *args, int from_tty)
+undisplay_command (const char *args, int from_tty)
{
if (args == NULL)
{
static void
do_one_display (struct display *d)
{
- struct cleanup *old_chain;
int within_current_scope;
if (d->enabled_p == 0)
expression if the current architecture has changed. */
if (d->exp != NULL && d->exp->gdbarch != get_current_arch ())
{
- xfree (d->exp);
- d->exp = NULL;
+ d->exp.reset ();
d->block = NULL;
}
if (d->exp == NULL)
{
- volatile struct gdb_exception ex;
- TRY_CATCH (ex, RETURN_MASK_ALL)
+ TRY
{
innermost_block = NULL;
d->exp = parse_expression (d->exp_string);
d->block = innermost_block;
}
- if (ex.reason < 0)
+ CATCH (ex, RETURN_MASK_ALL)
{
/* Can't re-parse the expression. Disable this display item. */
d->enabled_p = 0;
d->exp_string, ex.message);
return;
}
+ END_CATCH
}
if (d->block)
if (!within_current_scope)
return;
- old_chain = make_cleanup_restore_integer (¤t_display_number);
- current_display_number = d->number;
+ scoped_restore save_display_number
+ = make_scoped_restore (¤t_display_number, d->number);
annotate_display_begin ();
printf_filtered ("%d", d->number);
printf_filtered (": ");
if (d->format.size)
{
- volatile struct gdb_exception ex;
annotate_display_format ();
annotate_display_value ();
- TRY_CATCH (ex, RETURN_MASK_ERROR)
+ TRY
{
struct value *val;
CORE_ADDR addr;
- val = evaluate_expression (d->exp);
+ val = evaluate_expression (d->exp.get ());
addr = value_as_address (val);
if (d->format.format == 'i')
addr = gdbarch_addr_bits_remove (d->exp->gdbarch, addr);
do_examine (d->format, d->exp->gdbarch, addr);
}
- if (ex.reason < 0)
- fprintf_filtered (gdb_stdout, _("<error: %s>\n"), ex.message);
+ CATCH (ex, RETURN_MASK_ERROR)
+ {
+ fprintf_filtered (gdb_stdout, _("<error: %s>\n"), ex.message);
+ }
+ END_CATCH
}
else
{
struct value_print_options opts;
- volatile struct gdb_exception ex;
annotate_display_format ();
get_formatted_print_options (&opts, d->format.format);
opts.raw = d->format.raw;
- TRY_CATCH (ex, RETURN_MASK_ERROR)
+ TRY
{
struct value *val;
- val = evaluate_expression (d->exp);
+ val = evaluate_expression (d->exp.get ());
print_formatted (val, d->format.size, &opts, gdb_stdout);
}
- if (ex.reason < 0)
- fprintf_filtered (gdb_stdout, _("<error: %s>"), ex.message);
+ CATCH (ex, RETURN_MASK_ERROR)
+ {
+ fprintf_filtered (gdb_stdout, _("<error: %s>"), ex.message);
+ }
+ END_CATCH
+
printf_filtered ("\n");
}
annotate_display_end ();
gdb_flush (gdb_stdout);
- do_cleanups (old_chain);
}
/* Display all of the values on the auto-display chain which can be
}
static void
-display_info (char *ignore, int from_tty)
+info_display_command (char *ignore, int from_tty)
{
struct display *d;
commands. ENABLE decides what to do. */
static void
-enable_disable_display_command (char *args, int from_tty, int enable)
+enable_disable_display_command (const char *args, int from_tty, int enable)
{
if (args == NULL)
{
/* The "enable display" command. */
static void
-enable_display_command (char *args, int from_tty)
+enable_display_command (const char *args, int from_tty)
{
enable_disable_display_command (args, from_tty, 1);
}
/* The "disable display" command. */
static void
-disable_display_command (char *args, int from_tty)
+disable_display_command (const char *args, int from_tty)
{
enable_disable_display_command (args, from_tty, 0);
}
an item by re-parsing .exp_string field in the new execution context. */
static void
-clear_dangling_display_expressions (struct so_list *solib)
+clear_dangling_display_expressions (struct objfile *objfile)
{
- struct objfile *objfile = solib->objfile;
struct display *d;
+ struct program_space *pspace;
/* With no symbol file we cannot have a block or expression from it. */
if (objfile == NULL)
return;
+ pspace = objfile->pspace;
if (objfile->separate_debug_objfile_backlink)
- objfile = objfile->separate_debug_objfile_backlink;
- gdb_assert (objfile->pspace == solib->pspace);
+ {
+ objfile = objfile->separate_debug_objfile_backlink;
+ gdb_assert (objfile->pspace == pspace);
+ }
for (d = display_chain; d != NULL; d = d->next)
{
- if (d->pspace != solib->pspace)
+ if (d->pspace != pspace)
continue;
if (lookup_objfile_from_block (d->block) == objfile
- || (d->exp && exp_uses_objfile (d->exp, objfile)))
+ || (d->exp != NULL && exp_uses_objfile (d->exp.get (), objfile)))
{
- xfree (d->exp);
- d->exp = NULL;
+ d->exp.reset ();
d->block = NULL;
}
}
struct frame_info *frame,
struct ui_file *stream, int indent)
{
- volatile struct gdb_exception except;
if (!name)
name = SYMBOL_PRINT_NAME (var);
fprintf_filtered (stream, "%s%s = ", n_spaces (2 * indent), name);
- TRY_CATCH (except, RETURN_MASK_ERROR)
+ TRY
{
struct value *val;
struct value_print_options opts;
- val = read_var_value (var, frame);
+ /* READ_VAR_VALUE needs a block in order to deal with non-local
+ references (i.e. to handle nested functions). In this context, we
+ print variables that are local to this frame, so we can avoid passing
+ a block to it. */
+ val = read_var_value (var, NULL, frame);
get_user_print_options (&opts);
opts.deref_ref = 1;
common_val_print (val, stream, indent, &opts, current_language);
function. */
frame = NULL;
}
- if (except.reason < 0)
- fprintf_filtered(stream, "<error reading variable %s (%s)>", name,
- except.message);
+ CATCH (except, RETURN_MASK_ERROR)
+ {
+ fprintf_filtered(stream, "<error reading variable %s (%s)>", name,
+ except.message);
+ }
+ END_CATCH
+
fprintf_filtered (stream, "\n");
}
+/* Subroutine of ui_printf to simplify it.
+ Print VALUE to STREAM using FORMAT.
+ VALUE is a C-style string on the target. */
+
+static void
+printf_c_string (struct ui_file *stream, const char *format,
+ struct value *value)
+{
+ gdb_byte *str;
+ CORE_ADDR tem;
+ int j;
+
+ tem = value_as_address (value);
+
+ /* This is a %s argument. Find the length of the string. */
+ for (j = 0;; j++)
+ {
+ gdb_byte c;
+
+ QUIT;
+ read_memory (tem + j, &c, 1);
+ if (c == 0)
+ break;
+ }
+
+ /* Copy the string contents into a string inside GDB. */
+ str = (gdb_byte *) alloca (j + 1);
+ if (j != 0)
+ read_memory (tem, str, j);
+ str[j] = 0;
+
+ fprintf_filtered (stream, format, (char *) str);
+}
+
+/* Subroutine of ui_printf to simplify it.
+ Print VALUE to STREAM using FORMAT.
+ VALUE is a wide C-style string on the target. */
+
+static void
+printf_wide_c_string (struct ui_file *stream, const char *format,
+ struct value *value)
+{
+ gdb_byte *str;
+ CORE_ADDR tem;
+ int j;
+ struct gdbarch *gdbarch = get_type_arch (value_type (value));
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+ struct type *wctype = lookup_typename (current_language, gdbarch,
+ "wchar_t", NULL, 0);
+ int wcwidth = TYPE_LENGTH (wctype);
+ gdb_byte *buf = (gdb_byte *) alloca (wcwidth);
+
+ tem = value_as_address (value);
+
+ /* This is a %s argument. Find the length of the string. */
+ for (j = 0;; j += wcwidth)
+ {
+ QUIT;
+ read_memory (tem + j, buf, wcwidth);
+ if (extract_unsigned_integer (buf, wcwidth, byte_order) == 0)
+ break;
+ }
+
+ /* Copy the string contents into a string inside GDB. */
+ str = (gdb_byte *) alloca (j + wcwidth);
+ if (j != 0)
+ read_memory (tem, str, j);
+ memset (&str[j], 0, wcwidth);
+
+ auto_obstack output;
+
+ convert_between_encodings (target_wide_charset (gdbarch),
+ host_charset (),
+ str, j, wcwidth,
+ &output, translit_char);
+ obstack_grow_str0 (&output, "");
+
+ fprintf_filtered (stream, format, obstack_base (&output));
+}
+
+/* Subroutine of ui_printf to simplify it.
+ Print VALUE, a floating point value, to STREAM using FORMAT. */
+
+static void
+printf_floating (struct ui_file *stream, const char *format,
+ struct value *value, enum argclass argclass)
+{
+ /* Parameter data. */
+ struct type *param_type = value_type (value);
+ struct gdbarch *gdbarch = get_type_arch (param_type);
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+
+ /* Determine target type corresponding to the format string. */
+ struct type *fmt_type;
+ switch (argclass)
+ {
+ case double_arg:
+ fmt_type = builtin_type (gdbarch)->builtin_double;
+ break;
+ case long_double_arg:
+ fmt_type = builtin_type (gdbarch)->builtin_long_double;
+ break;
+ case dec32float_arg:
+ fmt_type = builtin_type (gdbarch)->builtin_decfloat;
+ break;
+ case dec64float_arg:
+ fmt_type = builtin_type (gdbarch)->builtin_decdouble;
+ break;
+ case dec128float_arg:
+ fmt_type = builtin_type (gdbarch)->builtin_declong;
+ break;
+ default:
+ gdb_assert_not_reached ("unexpected argument class");
+ }
+
+ /* To match the traditional GDB behavior, the conversion is
+ done differently depending on the type of the parameter:
+
+ - if the parameter has floating-point type, it's value
+ is converted to the target type;
+
+ - otherwise, if the parameter has a type that is of the
+ same size as a built-in floating-point type, the value
+ bytes are interpreted as if they were of that type, and
+ then converted to the target type (this is not done for
+ decimal floating-point argument classes);
+
+ - otherwise, if the source value has an integer value,
+ it's value is converted to the target type;
+
+ - otherwise, an error is raised.
+
+ In either case, the result of the conversion is a byte buffer
+ formatted in the target format for the target type. */
+
+ if (TYPE_CODE (fmt_type) == TYPE_CODE_FLT)
+ {
+ param_type = float_type_from_length (param_type);
+ if (param_type != value_type (value))
+ value = value_from_contents (param_type, value_contents (value));
+ }
+
+ value = value_cast (fmt_type, value);
+
+ /* Convert the value to a string and print it. */
+ std::string str
+ = target_float_to_string (value_contents (value), fmt_type, format);
+ fputs_filtered (str.c_str (), stream);
+}
+
+/* Subroutine of ui_printf to simplify it.
+ Print VALUE, a target pointer, to STREAM using FORMAT. */
+
+static void
+printf_pointer (struct ui_file *stream, const char *format,
+ struct value *value)
+{
+ /* We avoid the host's %p because pointers are too
+ likely to be the wrong size. The only interesting
+ modifier for %p is a width; extract that, and then
+ handle %p as glibc would: %#x or a literal "(nil)". */
+
+ const char *p;
+ char *fmt, *fmt_p;
+#ifdef PRINTF_HAS_LONG_LONG
+ long long val = value_as_long (value);
+#else
+ long val = value_as_long (value);
+#endif
+
+ fmt = (char *) alloca (strlen (format) + 5);
+
+ /* Copy up to the leading %. */
+ p = format;
+ fmt_p = fmt;
+ while (*p)
+ {
+ int is_percent = (*p == '%');
+
+ *fmt_p++ = *p++;
+ if (is_percent)
+ {
+ if (*p == '%')
+ *fmt_p++ = *p++;
+ else
+ break;
+ }
+ }
+
+ if (val != 0)
+ *fmt_p++ = '#';
+
+ /* Copy any width. */
+ while (*p >= '0' && *p < '9')
+ *fmt_p++ = *p++;
+
+ gdb_assert (*p == 'p' && *(p + 1) == '\0');
+ if (val != 0)
+ {
+#ifdef PRINTF_HAS_LONG_LONG
+ *fmt_p++ = 'l';
+#endif
+ *fmt_p++ = 'l';
+ *fmt_p++ = 'x';
+ *fmt_p++ = '\0';
+ fprintf_filtered (stream, fmt, val);
+ }
+ else
+ {
+ *fmt_p++ = 's';
+ *fmt_p++ = '\0';
+ fprintf_filtered (stream, fmt, "(nil)");
+ }
+}
+
/* printf "printf format string" ARG to STREAM. */
static void
-ui_printf (char *arg, struct ui_file *stream)
+ui_printf (const char *arg, struct ui_file *stream)
{
struct format_piece *fpieces;
- char *s = arg;
+ const char *s = arg;
struct value **val_args;
int allocated_args = 20;
struct cleanup *old_cleanups;
- val_args = xmalloc (allocated_args * sizeof (struct value *));
+ val_args = XNEWVEC (struct value *, allocated_args);
old_cleanups = make_cleanup (free_current_contents, &val_args);
if (s == 0)
while (*s != '\0')
{
- char *s1;
+ const char *s1;
if (nargs == allocated_args)
val_args = (struct value **) xrealloc ((char *) val_args,
switch (fpieces[fr].argclass)
{
case string_arg:
- {
- gdb_byte *str;
- CORE_ADDR tem;
- int j;
-
- tem = value_as_address (val_args[i]);
-
- /* This is a %s argument. Find the length of the string. */
- for (j = 0;; j++)
- {
- gdb_byte c;
-
- QUIT;
- read_memory (tem + j, &c, 1);
- if (c == 0)
- break;
- }
-
- /* Copy the string contents into a string inside GDB. */
- str = (gdb_byte *) alloca (j + 1);
- if (j != 0)
- read_memory (tem, str, j);
- str[j] = 0;
-
- fprintf_filtered (stream, current_substring, (char *) str);
- }
+ printf_c_string (stream, current_substring, val_args[i]);
break;
case wide_string_arg:
- {
- gdb_byte *str;
- CORE_ADDR tem;
- int j;
- struct gdbarch *gdbarch
- = get_type_arch (value_type (val_args[i]));
- enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
- struct type *wctype = lookup_typename (current_language, gdbarch,
- "wchar_t", NULL, 0);
- int wcwidth = TYPE_LENGTH (wctype);
- gdb_byte *buf = alloca (wcwidth);
- struct obstack output;
- struct cleanup *inner_cleanup;
-
- tem = value_as_address (val_args[i]);
-
- /* This is a %s argument. Find the length of the string. */
- for (j = 0;; j += wcwidth)
- {
- QUIT;
- read_memory (tem + j, buf, wcwidth);
- if (extract_unsigned_integer (buf, wcwidth, byte_order) == 0)
- break;
- }
-
- /* Copy the string contents into a string inside GDB. */
- str = (gdb_byte *) alloca (j + wcwidth);
- if (j != 0)
- read_memory (tem, str, j);
- memset (&str[j], 0, wcwidth);
-
- obstack_init (&output);
- inner_cleanup = make_cleanup_obstack_free (&output);
-
- convert_between_encodings (target_wide_charset (gdbarch),
- host_charset (),
- str, j, wcwidth,
- &output, translit_char);
- obstack_grow_str0 (&output, "");
-
- fprintf_filtered (stream, current_substring,
- obstack_base (&output));
- do_cleanups (inner_cleanup);
- }
+ printf_wide_c_string (stream, current_substring, val_args[i]);
break;
case wide_char_arg:
{
struct type *wctype = lookup_typename (current_language, gdbarch,
"wchar_t", NULL, 0);
struct type *valtype;
- struct obstack output;
- struct cleanup *inner_cleanup;
const gdb_byte *bytes;
valtype = value_type (val_args[i]);
bytes = value_contents (val_args[i]);
- obstack_init (&output);
- inner_cleanup = make_cleanup_obstack_free (&output);
+ auto_obstack output;
convert_between_encodings (target_wide_charset (gdbarch),
host_charset (),
fprintf_filtered (stream, current_substring,
obstack_base (&output));
- do_cleanups (inner_cleanup);
}
break;
- case double_arg:
- {
- struct type *type = value_type (val_args[i]);
- DOUBLEST val;
- int inv;
-
- /* If format string wants a float, unchecked-convert the value
- to floating point of the same size. */
- type = float_type_from_length (type);
- val = unpack_double (type, value_contents (val_args[i]), &inv);
- if (inv)
- error (_("Invalid floating value found in program."));
-
- fprintf_filtered (stream, current_substring, (double) val);
- break;
- }
- case long_double_arg:
-#ifdef HAVE_LONG_DOUBLE
- {
- struct type *type = value_type (val_args[i]);
- DOUBLEST val;
- int inv;
-
- /* If format string wants a float, unchecked-convert the value
- to floating point of the same size. */
- type = float_type_from_length (type);
- val = unpack_double (type, value_contents (val_args[i]), &inv);
- if (inv)
- error (_("Invalid floating value found in program."));
-
- fprintf_filtered (stream, current_substring,
- (long double) val);
- break;
- }
-#else
- error (_("long double not supported in printf"));
-#endif
case long_long_arg:
#ifdef PRINTF_HAS_LONG_LONG
{
fprintf_filtered (stream, current_substring, val);
break;
}
-
- /* Handles decimal floating values. */
- case decfloat_arg:
- {
- const gdb_byte *param_ptr = value_contents (val_args[i]);
-
-#if defined (PRINTF_HAS_DECFLOAT)
- /* If we have native support for Decimal floating
- printing, handle it here. */
- fprintf_filtered (stream, current_substring, param_ptr);
-#else
-
- /* As a workaround until vasprintf has native support for DFP
- we convert the DFP values to string and print them using
- the %s format specifier. */
-
- char *eos, *sos;
- int nnull_chars = 0;
-
- /* Parameter data. */
- struct type *param_type = value_type (val_args[i]);
- struct gdbarch *gdbarch = get_type_arch (param_type);
- enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
-
- /* DFP output data. */
- struct value *dfp_value = NULL;
- gdb_byte *dfp_ptr;
- int dfp_len = 16;
- gdb_byte dec[16];
- struct type *dfp_type = NULL;
- char decstr[MAX_DECIMAL_STRING];
-
- /* Points to the end of the string so that we can go back
- and check for DFP length modifiers. */
- eos = current_substring + strlen (current_substring);
-
- /* Look for the float/double format specifier. */
- while (*eos != 'f' && *eos != 'e' && *eos != 'E'
- && *eos != 'g' && *eos != 'G')
- eos--;
-
- sos = eos;
-
- /* Search for the '%' char and extract the size and type of
- the output decimal value based on its modifiers
- (%Hf, %Df, %DDf). */
- while (*--sos != '%')
- {
- if (*sos == 'H')
- {
- dfp_len = 4;
- dfp_type = builtin_type (gdbarch)->builtin_decfloat;
- }
- else if (*sos == 'D' && *(sos - 1) == 'D')
- {
- dfp_len = 16;
- dfp_type = builtin_type (gdbarch)->builtin_declong;
- sos--;
- }
- else
- {
- dfp_len = 8;
- dfp_type = builtin_type (gdbarch)->builtin_decdouble;
- }
- }
-
- /* Replace %Hf, %Df and %DDf with %s's. */
- *++sos = 's';
-
- /* Go through the whole format string and pull the correct
- number of chars back to compensate for the change in the
- format specifier. */
- while (nnull_chars < nargs - i)
- {
- if (*eos == '\0')
- nnull_chars++;
-
- *++sos = *++eos;
- }
-
- /* Conversion between different DFP types. */
- if (TYPE_CODE (param_type) == TYPE_CODE_DECFLOAT)
- decimal_convert (param_ptr, TYPE_LENGTH (param_type),
- byte_order, dec, dfp_len, byte_order);
- else
- /* If this is a non-trivial conversion, just output 0.
- A correct converted value can be displayed by explicitly
- casting to a DFP type. */
- decimal_from_string (dec, dfp_len, byte_order, "0");
-
- dfp_value = value_from_decfloat (dfp_type, dec);
-
- dfp_ptr = (gdb_byte *) value_contents (dfp_value);
-
- decimal_to_string (dfp_ptr, dfp_len, byte_order, decstr);
-
- /* Print the DFP value. */
- fprintf_filtered (stream, current_substring, decstr);
-
- break;
-#endif
- }
-
+ /* Handles floating-point values. */
+ case double_arg:
+ case long_double_arg:
+ case dec32float_arg:
+ case dec64float_arg:
+ case dec128float_arg:
+ printf_floating (stream, current_substring, val_args[i],
+ fpieces[fr].argclass);
+ break;
case ptr_arg:
- {
- /* We avoid the host's %p because pointers are too
- likely to be the wrong size. The only interesting
- modifier for %p is a width; extract that, and then
- handle %p as glibc would: %#x or a literal "(nil)". */
-
- char *p, *fmt, *fmt_p;
-#ifdef PRINTF_HAS_LONG_LONG
- long long val = value_as_long (val_args[i]);
-#else
- long val = value_as_long (val_args[i]);
-#endif
-
- fmt = alloca (strlen (current_substring) + 5);
-
- /* Copy up to the leading %. */
- p = current_substring;
- fmt_p = fmt;
- while (*p)
- {
- int is_percent = (*p == '%');
-
- *fmt_p++ = *p++;
- if (is_percent)
- {
- if (*p == '%')
- *fmt_p++ = *p++;
- else
- break;
- }
- }
-
- if (val != 0)
- *fmt_p++ = '#';
-
- /* Copy any width. */
- while (*p >= '0' && *p < '9')
- *fmt_p++ = *p++;
-
- gdb_assert (*p == 'p' && *(p + 1) == '\0');
- if (val != 0)
- {
-#ifdef PRINTF_HAS_LONG_LONG
- *fmt_p++ = 'l';
-#endif
- *fmt_p++ = 'l';
- *fmt_p++ = 'x';
- *fmt_p++ = '\0';
- fprintf_filtered (stream, fmt, val);
- }
- else
- {
- *fmt_p++ = 's';
- *fmt_p++ = '\0';
- fprintf_filtered (stream, fmt, "(nil)");
- }
-
- break;
- }
+ printf_pointer (stream, current_substring, val_args[i]);
+ break;
case literal_piece:
/* Print a portion of the format string that has no
directives. Note that this will not include any
/* Implement the "printf" command. */
static void
-printf_command (char *arg, int from_tty)
+printf_command (const char *arg, int from_tty)
{
ui_printf (arg, gdb_stdout);
+ gdb_flush (gdb_stdout);
}
/* Implement the "eval" command. */
static void
-eval_command (char *arg, int from_tty)
+eval_command (const char *arg, int from_tty)
{
- struct ui_file *ui_out = mem_fileopen ();
- struct cleanup *cleanups = make_cleanup_ui_file_delete (ui_out);
- char *expanded;
+ string_file stb;
- ui_printf (arg, ui_out);
+ ui_printf (arg, &stb);
- expanded = ui_file_xstrdup (ui_out, NULL);
- make_cleanup (xfree, expanded);
+ std::string expanded = insert_user_defined_cmd_args (stb.c_str ());
- execute_command (expanded, from_tty);
-
- do_cleanups (cleanups);
+ execute_command (&expanded[0], from_tty);
}
void
current_display_number = -1;
- observer_attach_solib_unloaded (clear_dangling_display_expressions);
+ observer_attach_free_objfile (clear_dangling_display_expressions);
- add_info ("address", address_info,
+ add_info ("address", info_address_command,
_("Describe where symbol SYM is stored."));
- add_info ("symbol", sym_info, _("\
+ add_info ("symbol", info_symbol_command, _("\
Describe what symbol is at location ADDR.\n\
Only for symbols with fixed locations (global or static scope)."));
ADDRESS is an expression for the memory address to examine.\n\
FMT is a repeat count followed by a format letter and a size letter.\n\
Format letters are o(octal), x(hex), d(decimal), u(unsigned decimal),\n\
- t(binary), f(float), a(address), i(instruction), c(char) and s(string).\n\
+ t(binary), f(float), a(address), i(instruction), c(char), s(string)\n\
+ and z(hex, zero padded on the left).\n\
Size letters are b(byte), h(halfword), w(word), g(giant, 8 bytes).\n\
The specified number of objects of the specified size are printed\n\
-according to the format.\n\n\
+according to the format. If a negative number is specified, memory is\n\
+examined backward from the address.\n\n\
Defaults for format and size letters are those previously used.\n\
Default count is 1. Default address is following last thing printed\n\
with this command or \"print\"."));
_("Print line number and file of definition of variable."));
#endif
- add_info ("display", display_info, _("\
+ add_info ("display", info_display_command, _("\
Expressions to display when program stops, with code numbers."));
add_cmd ("undisplay", class_vars, undisplay_command, _("\
but no count or size letter (see \"x\" command)."));
set_cmd_completer (c, expression_completer);
add_com_alias ("p", "print", class_vars, 1);
-
- c = add_com ("inspect", class_vars, inspect_command, _("\
-Same as \"print\" command, except that if you are running in the epoch\n\
-environment, the value is printed in its own window."));
- set_cmd_completer (c, expression_completer);
+ add_com_alias ("inspect", "print", class_vars, 1);
add_setshow_uinteger_cmd ("max-symbolic-offset", no_class,
&max_symbolic_offset, _("\
Set the largest offset that will be printed in <symbol+1234> form."), _("\
-Show the largest offset that will be printed in <symbol+1234> form."), NULL,
+Show the largest offset that will be printed in <symbol+1234> form."), _("\
+Tell GDB to only display the symbolic form of an address if the\n\
+offset between the closest earlier symbol and the address is less than\n\
+the specified maximum offset. The default is \"unlimited\", which tells GDB\n\
+to always print the symbolic form of an address if any symbol precedes\n\
+it. Zero is equivalent to \"unlimited\"."),
NULL,
show_max_symbolic_offset,
&setprintlist, &showprintlist);
projects / deliverable / binutils-gdb.git / blobdiff