/* Remote debugging interface for Hitachi E7000 ICE, for GDB
- Copyright 1993, 1994 Free Software Foundation, Inc.
+ Copyright 1993, 1994, 1996 Free Software Foundation, Inc.
Contributed by Cygnus Support.
Written by Steve Chamberlain for Cygnus Support.
#include "command.h"
#include <signal.h>
#include "gdb_string.h"
+#include "gdbcmd.h"
#include <sys/types.h>
#include "serial.h"
#include "remote-utils.h"
#include "symfile.h"
-#if 0
-#define HARD_BREAKPOINTS
-#define BC_BREAKPOINTS 0
+#include <time.h>
+#include <ctype.h>
+
+#if 1
+#define HARD_BREAKPOINTS /* Now handled by set option. */
+#define BC_BREAKPOINTS use_hard_breakpoints
#endif
#define CTRLC 0x03
extern void notice_quit PARAMS ((void));
+extern void report_transfer_performance PARAMS ((unsigned long,
+ time_t, time_t));
+
+extern char *sh_processor_type;
+
/* Local function declarations. */
static void e7000_close PARAMS ((int));
static void expect_prompt PARAMS ((void));
+static int e7000_parse_device PARAMS ((char *args, char *dev_name,
+ int baudrate));
/* Variables. */
static serial_t e7000_desc;
+/* Allow user to chose between using hardware breakpoints or memory. */
+static int use_hard_breakpoints = 0; /* use sw breakpoints by default */
+
/* Nonzero if using the tcp serial driver. */
-static int using_tcp;
+static int using_tcp; /* direct tcp connection to target */
+static int using_tcp_remote; /* indirect connection to target
+ via tcp to controller */
/* Nonzero if using the pc isa card. */
static int ctrl_c;
-static int timeout = 5;
+static int timeout = 20;
/* Send data to e7000debug. */
error ("Use \"target e7000 ...\" first.");
if (remote_debug)
- printf("Sending %s\n", buf);
+ printf_unfiltered ("Sending %s\n", buf);
if (SERIAL_WRITE (e7000_desc, buf, strlen (buf)))
- fprintf (stderr, "SERIAL_WRITE failed: %s\n", safe_strerror (errno));
+ fprintf_unfiltered (gdb_stderr, "SERIAL_WRITE failed: %s\n", safe_strerror (errno));
/* And expect to see it echoed, unless using the pc interface */
#if 0
}
/* Read a character from the remote system, doing all the fancy timeout
- stuff. */
+ stuff. Handles serial errors and EOF. If TIMEOUT == 0, and no chars,
+ returns -1, else returns next char. Discards chars > 127. */
static int
readchar (timeout)
echo = 0;
error ("Timeout reading from remote system.");
}
+ else if (c < 0)
+ error ("Serial communication error");
+
if (remote_debug)
{
- putchar (c);
- fflush (stdout);
+ putchar_unfiltered (c);
+ gdb_flush (gdb_stdout);
}
return normal (c);
while (1)
{
c = readchar (timeout);
+#if 0
notice_quit ();
if (quit_flag == 1)
{
quit ();
}
}
+#endif
- if (c == SERIAL_ERROR)
- {
- error ("Serial communication error");
- }
- if (echo || remote_debug)
+ if (echo)
{
if (c == '\r' || c == '\n')
{
if (!nl)
- putchar ('\n');
+ putchar_unfiltered ('\n');
nl = 1;
}
else
{
nl = 0;
- putchar (c);
+ putchar_unfiltered (c);
}
- fflush (stdout);
+ gdb_flush (gdb_stdout);
}
if (normal (c) == normal (*p++))
{
dir = next (&args);
if (from_tty)
{
- printf ("Set info to %s %s %s %s\n", machine, user, passwd, dir);
+ printf_unfiltered ("Set info to %s %s %s %s\n", machine, user, passwd, dir);
}
}
else
char buf[200];
int oldtimeout = timeout;
- timeout = 10;
+ timeout = remote_timeout;
sprintf (buf, "ftp %s\r", machine);
puts_e7000debug (buf);
timeout = oldtimeout;
}
-static void
-e7000_open (args, from_tty)
- char *args;
- int from_tty;
+static int
+e7000_parse_device (args, dev_name, baudrate)
+ char *args;
+ char *dev_name;
+ int baudrate;
{
- int n;
- int loop;
- char junk[100];
- int sync;
- target_preopen (from_tty);
-
- n = 0;
+ char junk[128];
+ int n = 0;
if (args && strcasecmp (args, "pc") == 0)
{
strcpy (dev_name, args);
+ using_pc = 1;
}
else
{
- if (args)
+ /* FIXME! temp hack to allow use with port master -
+ target tcp_remote <device> */
+ if (args && strncmp (args, "tcp", 10) == 0)
+ {
+ char com_type[128];
+ n = sscanf (args, " %s %s %d %s", com_type, dev_name, &baudrate, junk);
+ using_tcp_remote=1;
+ n--;
+ }
+ else if (args)
{
n = sscanf (args, " %s %d %s", dev_name, &baudrate, junk);
}
{
error ("Bad arguments. Usage:\ttarget e7000 <device> <speed>\n\
or \t\ttarget e7000 <host>[:<port>]\n\
+or \t\ttarget e7000 tcp_remote <host>[:<port>]\n\
or \t\ttarget e7000 pc\n");
}
-#ifndef __GO32__
+#if !defined(__GO32__) && !defined(_WIN32)
+ /* FIXME! test for ':' is ambiguous */
if (n == 1 && strchr (dev_name, ':') == 0)
{
/* Default to normal telnet port */
+ /* serial_open will use this to determine tcp communication */
strcat (dev_name, ":23");
}
#endif
+ if (!using_tcp_remote && strchr (dev_name, ':'))
+ using_tcp = 1;
}
- push_target (&e7000_ops);
-
- e7000_desc = SERIAL_OPEN (dev_name);
+ return n;
+}
- if (!e7000_desc)
- perror_with_name (dev_name);
+/* Stub for catch_errors. */
- using_tcp = strcmp (e7000_desc->ops->name, "tcp") == 0;
- using_pc = strcmp (e7000_desc->ops->name, "pc") == 0;
+static int
+e7000_start_remote (dummy)
+ char *dummy;
+{
+ int loop;
+ int sync;
+ int try;
+ int quit_trying;
- SERIAL_SETBAUDRATE (e7000_desc, baudrate);
- SERIAL_RAW (e7000_desc);
+ immediate_quit = 1; /* Allow user to interrupt it */
/* Hello? Are you there? */
sync = 0;
loop = 0;
+ try = 0;
+ quit_trying = 20;
putchar_e7000 (CTRLC);
- while (!sync)
+ while (!sync && ++try <= quit_trying)
{
int c;
- if (from_tty)
- printf_unfiltered ("[waiting for e7000...]\n");
+ printf_unfiltered ("[waiting for e7000...]\n");
write_e7000 ("\r");
- c = SERIAL_READCHAR (e7000_desc, 1);
- while (c != SERIAL_TIMEOUT)
+ c = readchar (1);
+
+ /* FIXME! this didn't seem right-> while (c != SERIAL_TIMEOUT)
+ * we get stuck in this loop ...
+ * We may never timeout, and never sync up :-(
+ */
+ while (!sync && c != -1)
{
/* Dont echo cr's */
- if (from_tty && c != '\r')
+ if (c != '\r')
{
- putchar (c);
- fflush (stdout);
+ putchar_unfiltered (c);
+ gdb_flush (gdb_stdout);
}
+ /* Shouldn't we either break here, or check for sync in inner loop? */
if (c == ':')
sync = 1;
QUIT ;
-
if (quit_flag)
{
putchar_e7000 (CTRLC);
- quit_flag = 0;
+ /* Was-> quit_flag = 0; */
+ c = -1;
+ quit_trying = try+1; /* we don't want to try anymore */
+ }
+ else
+ {
+ c = readchar (1);
}
- c = SERIAL_READCHAR (e7000_desc, 1);
}
}
- puts_e7000debug ("\r");
+ if (!sync)
+ {
+ fprintf_unfiltered (gdb_stderr, "Giving up after %d tries...\n",try);
+ error ("Unable to syncronize with target.\n");
+ }
+
+ puts_e7000debug ("\r");
+ expect_prompt ();
+ puts_e7000debug ("b -\r"); /* Clear breakpoints */
expect_prompt ();
- if (from_tty)
- printf_filtered ("Remote %s connected to %s\n", target_shortname,
- dev_name);
+ immediate_quit = 0;
+
+/* This is really the job of start_remote however, that makes an assumption
+ that the target is about to print out a status message of some sort. That
+ doesn't happen here. */
+
+ flush_cached_frames ();
+ registers_changed ();
+ stop_pc = read_pc ();
+ set_current_frame (create_new_frame (read_fp (), stop_pc));
+ select_frame (get_current_frame (), 0);
+ print_stack_frame (selected_frame, -1, 1);
+
+ return 1;
+}
+
+static void
+e7000_open (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ int n;
+
+ target_preopen (from_tty);
+
+ n = e7000_parse_device (args, dev_name, baudrate);
+
+ push_target (&e7000_ops);
+
+ e7000_desc = SERIAL_OPEN (dev_name);
+
+ if (!e7000_desc)
+ perror_with_name (dev_name);
+
+ SERIAL_SETBAUDRATE (e7000_desc, baudrate);
+ SERIAL_RAW (e7000_desc);
#ifdef GDB_TARGET_IS_H8300
h8300hmode = 1;
#endif
+
+ /* Start the remote connection; if error (0), discard this target.
+ In particular, if the user quits, be sure to discard it
+ (we'd be in an inconsistent state otherwise). */
+ if (!catch_errors (e7000_start_remote, (char *)0,
+ "Couldn't establish connection to remote target\n", RETURN_MASK_ALL))
+ if (from_tty)
+ printf_filtered ("Remote target %s connected to %s\n", target_shortname,
+ dev_name);
}
/* Close out all files and local state before this target loses control. */
{
pop_target (); /* calls e7000_close to do the real work */
if (from_tty)
- printf ("Ending remote %s debugging\n", target_shortname);
+ printf_unfiltered ("Ending remote %s debugging\n", target_shortname);
}
/* Tell the remote machine to resume. */
#ifdef GDB_TARGET_IS_H8300
-char *want = "PC=%p CCR=%c\n\
+char *want_h8300h = "PC=%p CCR=%c\n\
ER0 - ER3 %0 %1 %2 %3\n\
ER4 - ER7 %4 %5 %6 %7\n";
-char *want_nopc = "%p CCR=%c\n\
+char *want_nopc_h8300h = "%p CCR=%c\n\
+ ER0 - ER3 %0 %1 %2 %3\n\
+ ER4 - ER7 %4 %5 %6 %7";
+
+char *want_h8300s = "PC=%p CCR=%c\n\
+ MACH=\n\
+ ER0 - ER3 %0 %1 %2 %3\n\
+ ER4 - ER7 %4 %5 %6 %7\n";
+
+char *want_nopc_h8300s = "%p CCR=%c EXR=%9\n\
ER0 - ER3 %0 %1 %2 %3\n\
ER4 - ER7 %4 %5 %6 %7";
R0-7 %0 %1 %2 %3 %4 %5 %6 %7\n\
R8-15 %8 %9 %10 %11 %12 %13 %14 %15";
+char *want_sh3 = "PC=%16 SR=%22\n\
+PR=%17 GBR=%18 VBR=%19\n\
+MACH=%20 MACL=%21 SSR=%23 SPC=%24\n\
+R0-7 %0 %1 %2 %3 %4 %5 %6 %7\n\
+R8-15 %8 %9 %10 %11 %12 %13 %14 %15\n\
+R0_BANK0-R3_BANK0 %25 %26 %27 %28\n\
+R4_BANK0-R7_BANK0 %29 %30 %31 %32\n\
+R0_BANK1-R3_BANK1 %33 %34 %35 %36\n\
+R4_BANK1-R7_BANK1 %37 %38 %39 %40";
+
+char *want_sh3_nopc = "%16 SR=%22\n\
+ PR=%17 GBR=%18 VBR=%19\n\
+ MACH=%20 MACL=%21 SSR=%22 SPC=%23\n\
+ R0-7 %0 %1 %2 %3 %4 %5 %6 %7\n\
+ R8-15 %8 %9 %10 %11 %12 %13 %14 %15\n\
+ R0_BANK0-R3_BANK0 %25 %26 %27 %28\n\
+ R4_BANK0-R7_BANK0 %29 %30 %31 %32\n\
+ R0_BANK1-R3_BANK1 %33 %34 %35 %36\n\
+ R4_BANK1-R7_BANK1 %37 %38 %39 %40";
+
#endif
static int
gch ()
{
- int c = readchar (timeout);
-
- if (remote_debug)
- {
- if (c >= ' ')
- printf ("%c", c);
- else if (c == '\n')
- printf ("\n");
- }
- return c;
+ return readchar (timeout);
}
static unsigned int
e7000_fetch_registers ()
{
int regno;
+ char *wanted;
puts_e7000debug ("R\r");
- fetch_regs_from_dump (gch, want);
+
+#ifdef GDB_TARGET_IS_SH
+ wanted = want;
+ if (target_architecture->arch == bfd_arch_sh)
+ switch (target_architecture->mach)
+ {
+ case bfd_mach_sh3:
+ case bfd_mach_sh3e:
+ /* start-sanitize-sh4 */
+ case bfd_mach_sh4:
+ /* end-sanitize-sh4 */
+ wanted = want_sh3;
+ }
+#else
+ if (h8300smode)
+ wanted = want_h8300s;
+ else
+ wanted = want_h8300h);
+#endif
+ fetch_regs_from_dump (gch, wanted);
/* And supply the extra ones the simulator uses */
for (regno = NUM_REALREGS; regno < NUM_REGS; regno++)
static void
e7000_files_info ()
{
- printf ("\tAttached to %s at %d baud.\n", dev_name, baudrate);
+ printf_unfiltered ("\tAttached to %s at %d baud.\n", dev_name, baudrate);
}
static int
compose[where++] = 0;
SERIAL_WRITE (e7000_desc, compose, where);
- j = SERIAL_READCHAR (e7000_desc, 0);
- if (j == SERIAL_TIMEOUT)
+ j = readchar (0);
+ if (j == -1)
{
/* This is ok - nothing there */
}
}
else
{
- printf ("@%d}@", j);
- while ((j = SERIAL_READCHAR(e7000_desc,0)) > 0)
+ printf_unfiltered ("@%d}@", j);
+ while ((j = readchar (0)) > 0)
{
- printf ("@{%d}@",j);
+ printf_unfiltered ("@{%d}@",j);
}
}
}
c = gch ();
if (c == '*')
{ /* Some kind of error */
- expect_prompt();
+ puts_e7000debug (".\r"); /* Some errors leave us in memory input mode */
+ expect_full_prompt();
return -1;
}
while (c != ' ')
}
-#if 0
+
/*
For large transfers we used to send
d <addr> <endaddr>\r
and receive
- <ADDR> < D A T A > < ASCII CODE >
- 000000 5F FD FD FF DF 7F DF FF 01 00 01 00 02 00 08 04 "_..............."
- 000010 FF D7 FF 7F D7 F1 7F FF 00 05 00 00 08 00 40 00 "..............@."
- 000020 7F FD FF F7 7F FF FF F7 00 00 00 00 00 00 00 00 "................"
+ <ADDRESS> < D A T A > < ASCII CODE >
+ 00000000 5F FD FD FF DF 7F DF FF 01 00 01 00 02 00 08 04 "_..............."
+ 00000010 FF D7 FF 7F D7 F1 7F FF 00 05 00 00 08 00 40 00 "..............@."
+ 00000020 7F FD FF F7 7F FF FF F7 00 00 00 00 00 00 00 00 "................"
A cost in chars for each transaction of 80 + 5*n-bytes.
*/
static int
-e7000_read_inferior_memory (memaddr, myaddr, len)
+e7000_read_inferior_memory_large (memaddr, myaddr, len)
CORE_ADDR memaddr;
unsigned char *myaddr;
int len;
count = 0;
c = gch ();
-
- /* First skip the command */
- while (c == '\n')
+
+ /* skip down to the first ">" */
+ while( c != '>' )
c = gch ();
-
- while (c == ' ')
- c = gch ();
- if (c == '*')
- {
- expect ("\r");
- return -1;
- }
-
- /* Skip the title line */
- while (c != '\n')
+ /* now skip to the end of that line */
+ while( c != '\r' )
c = gch ();
c = gch ();
+
while (count < len)
{
- /* Skip the address */
+ /* get rid of any white space before the address */
while (c <= ' ')
c = gch ();
+ /* Skip the address */
get_hex (&c);
/* read in the bytes on the line */
myaddr[count++] = get_hex (&c);
}
}
-
- while (c != '\n')
+ /* throw out the rest of the line */
+ while( c != '\r' )
c = gch ();
}
+ /* wait for the ":" prompt */
while (c != ':')
c = gch ();
return len;
}
+#if 0
+
static int
fast_but_for_the_pause_e7000_read_inferior_memory (memaddr, myaddr, len)
CORE_ADDR memaddr;
{
if (write)
return e7000_write_inferior_memory( memaddr, myaddr, len);
- else
- return e7000_read_inferior_memory( memaddr, myaddr, len);
+ else
+ if( len < 16 )
+ return e7000_read_inferior_memory( memaddr, myaddr, len);
+ else
+ return e7000_read_inferior_memory_large( memaddr, myaddr, len);
}
static void
{
}
+static void
+e7000_load (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ struct cleanup *old_chain;
+ asection *section;
+ bfd *pbfd;
+ bfd_vma entry;
+#define WRITESIZE 0x1000
+ char buf[2 + 4 + 4 + WRITESIZE]; /* `DT' + <addr> + <len> + <data> */
+ char *filename;
+ int quiet;
+ int nostart;
+ time_t start_time, end_time; /* Start and end times of download */
+ unsigned long data_count; /* Number of bytes transferred to memory */
+ int oldtimeout = timeout;
+
+ timeout = remote_timeout;
+
+
+ /* FIXME! change test to test for type of download */
+ if (!using_tcp)
+ {
+ generic_load (args, from_tty);
+ return;
+ }
+
+ /* for direct tcp connections, we can do a fast binary download */
+ buf[0] = 'D';
+ buf[1] = 'T';
+ quiet = 0;
+ nostart = 0;
+ filename = NULL;
+
+ while (*args != '\000')
+ {
+ char *arg;
+
+ while (isspace (*args)) args++;
+
+ arg = args;
+
+ while ((*args != '\000') && !isspace (*args)) args++;
+
+ if (*args != '\000')
+ *args++ = '\000';
+
+ if (*arg != '-')
+ filename = arg;
+ else if (strncmp (arg, "-quiet", strlen (arg)) == 0)
+ quiet = 1;
+ else if (strncmp (arg, "-nostart", strlen (arg)) == 0)
+ nostart = 1;
+ else
+ error ("unknown option `%s'", arg);
+ }
+
+ if (!filename)
+ filename = get_exec_file (1);
+
+ pbfd = bfd_openr (filename, gnutarget);
+ if (pbfd == NULL)
+ {
+ perror_with_name (filename);
+ return;
+ }
+ old_chain = make_cleanup (bfd_close, pbfd);
+
+ if (!bfd_check_format (pbfd, bfd_object))
+ error ("\"%s\" is not an object file: %s", filename,
+ bfd_errmsg (bfd_get_error ()));
+
+ start_time = time (NULL);
+ data_count = 0;
+
+ puts_e7000debug ("mw\r");
+
+ expect ("\nOK");
+
+ for (section = pbfd->sections; section; section = section->next)
+ {
+ if (bfd_get_section_flags (pbfd, section) & SEC_LOAD)
+ {
+ bfd_vma section_address;
+ bfd_size_type section_size;
+ file_ptr fptr;
+
+ section_address = bfd_get_section_vma (pbfd, section);
+ section_size = bfd_get_section_size_before_reloc (section);
+
+ if (!quiet)
+ printf_filtered ("[Loading section %s at 0x%x (%d bytes)]\n",
+ bfd_get_section_name (pbfd, section),
+ section_address,
+ section_size);
+
+ fptr = 0;
+
+ data_count += section_size;
+
+ while (section_size > 0)
+ {
+ int count;
+ static char inds[] = "|/-\\";
+ static int k = 0;
+
+ QUIT;
+
+ count = min (section_size, WRITESIZE);
+
+ buf[2] = section_address >> 24;
+ buf[3] = section_address >> 16;
+ buf[4] = section_address >> 8;
+ buf[5] = section_address;
+
+ buf[6] = count >> 24;
+ buf[7] = count >> 16;
+ buf[8] = count >> 8;
+ buf[9] = count;
+
+ bfd_get_section_contents (pbfd, section, buf + 10, fptr, count);
+
+ if (SERIAL_WRITE (e7000_desc, buf, count + 10))
+ fprintf_unfiltered (gdb_stderr,
+ "e7000_load: SERIAL_WRITE failed: %s\n",
+ safe_strerror(errno));
+
+ expect ("OK");
+
+ if (!quiet)
+ {
+ printf_unfiltered ("\r%c", inds[k++ % 4]);
+ gdb_flush (gdb_stdout);
+ }
+
+ section_address += count;
+ fptr += count;
+ section_size -= count;
+ }
+ }
+ }
+
+ write_e7000 ("ED");
+
+ expect_prompt ();
+
+ end_time = time (NULL);
+
+/* Finally, make the PC point at the start address */
+
+ if (exec_bfd)
+ write_pc (bfd_get_start_address (exec_bfd));
+
+ inferior_pid = 0; /* No process now */
+
+/* This is necessary because many things were based on the PC at the time that
+ we attached to the monitor, which is no longer valid now that we have loaded
+ new code (and just changed the PC). Another way to do this might be to call
+ normal_stop, except that the stack may not be valid, and things would get
+ horribly confused... */
+
+ clear_symtab_users ();
+
+ if (!nostart)
+ {
+ entry = bfd_get_start_address (pbfd);
+
+ if (!quiet)
+ printf_unfiltered ("[Starting %s at 0x%x]\n", filename, entry);
+
+/* start_routine (entry);*/
+ }
+
+ report_transfer_performance (data_count, start_time, end_time);
+
+ do_cleanups (old_chain);
+ timeout = oldtimeout;
+}
+
/* Clean up when a program exits.
The program actually lives on in the remote processor's RAM, and may be
generic_mourn_inferior (); /* Do all the proper things now */
}
+#define MAX_BREAKPOINTS 200
#ifdef HARD_BREAKPOINTS
-#define MAX_E7000DEBUG_BREAKPOINTS (BC_BREAKPOINTS ? 5 : 200)
+#define MAX_E7000DEBUG_BREAKPOINTS (BC_BREAKPOINTS ? 5 : MAX_BREAKPOINTS)
#else
-#define MAX_E7000DEBUG_BREAKPOINTS 200
+#define MAX_E7000DEBUG_BREAKPOINTS MAX_BREAKPOINTS
#endif
extern int memory_breakpoint_size;
-static CORE_ADDR breakaddr[MAX_E7000DEBUG_BREAKPOINTS] = {0};
+/* Since we can change to soft breakpoints dynamically, we must define
+ more than enough. Was breakaddr[MAX_E7000DEBUG_BREAKPOINTS]. */
+static CORE_ADDR breakaddr[MAX_BREAKPOINTS] = {0};
static int
e7000_insert_breakpoint (addr, shadow)
{
int i;
char buf[200];
+#if 0
static char nop[2] = NOP;
+#endif
for (i = 0; i <= MAX_E7000DEBUG_BREAKPOINTS; i++)
if (breakaddr[i] == 0)
puts_e7000debug("end\r");
putchar_e7000 (CTRLC);
- while ((c = SERIAL_READCHAR (e7000_desc, 1) != SERIAL_TIMEOUT))
+ while ((c = readchar (1) != -1))
{
if (quit_flag)
{
quit_flag = 0;
}
if (c > ' ' && c < 127)
- printf ("%c", c & 0xff);
+ printf_unfiltered ("%c", c & 0xff);
else
- printf ("<%x>", c & 0xff);
+ printf_unfiltered ("<%x>", c & 0xff);
}
}
int i;
int gotone = 0;
- c = SERIAL_READCHAR (e7000_desc, 1);
- if (c == SERIAL_TIMEOUT)
+ c = readchar (1);
+ if (c == -1)
{
printf_unfiltered ("[waiting for e7000...]\n");
}
if (buffer != saveaway)
{
*buffer++ = 0;
- printf ("%s", buffer);
+ printf_unfiltered ("%s", buffer);
buffer = saveaway;
}
- if (c != SERIAL_TIMEOUT)
+ if (c != -1)
{
- putchar (c);
- fflush (stdout);
+ putchar_unfiltered (c);
+ gdb_flush (gdb_stdout);
}
}
}
int running_count = 0;
int had_sleep = 0;
int loop = 1;
+ char *wanted_nopc;
/* Then echo chars until PC= string seen */
gch (); /* Drop cr */
/* Skip till the PC= */
expect ("=");
- fetch_regs_from_dump (gch, want_nopc);
+
+#ifdef GDB_TARGET_IS_SH
+ wanted_nopc = want_nopc;
+ if (target_architecture->arch == bfd_arch_sh)
+ switch (target_architecture->mach)
+ {
+ case bfd_mach_sh3:
+ case bfd_mach_sh3e:
+ /* start-sanitize-sh4 */
+ case bfd_mach_sh4:
+ /* end-sanitize-sh4 */
+ wanted_nopc = want_sh3_nopc;
+ }
+#else
+ if (h8300smode)
+ wanted_nopc = want_nopc_h8300s;
+ else
+ wanted_nopc = want_nopc_h8300h);
+#endif
+ fetch_regs_from_dump (gch, wanted_nopc);
/* And supply the extra ones the simulator uses */
for (regno = NUM_REALREGS; regno < NUM_REGS; regno++)
switch (stop_reason)
{
case 1: /* Breakpoint */
- write_pc (read_pc () - 2); /* PC is always off by 2 for breakpoints */
+ write_pc (read_pc ()); /* PC is always off by 2 for breakpoints */
status->value.sig = TARGET_SIGNAL_TRAP;
break;
case 0: /* Single step */
return 0;
}
+/* Stop the running program. */
+
+static void
+e7000_stop ()
+{
+ /* Sending a ^C is supposed to stop the running program. */
+ putchar_e7000 (CTRLC);
+}
+
/* Define the target subroutine names. */
struct target_ops e7000_ops =
0, /* to_terminal_ours */
0, /* to_terminal_info */
e7000_kill, /* to_kill */
- generic_load, /* to_load */
+ e7000_load, /* to_load */
0, /* to_lookup_symbol */
e7000_create_inferior, /* to_create_inferior */
e7000_mourn_inferior, /* to_mourn_inferior */
0, /* to_can_run */
0, /* to_notice_signals */
0, /* to_thread_alive */
- 0, /* to_stop */
+ e7000_stop, /* to_stop */
process_stratum, /* to_stratum */
0, /* next (unused) */
1, /* to_has_all_memory */
{
add_target (&e7000_ops);
- add_com ("e7000 <command>", class_obscure, e7000_command,
+ add_com ("e7000", class_obscure, e7000_command,
"Send a command to the e7000 monitor.");
- add_com ("ftplogin <machine> <name> <passwd> <dir>", class_obscure, e7000_login_command,
+ add_com ("ftplogin", class_obscure, e7000_login_command,
"Login to machine and change to directory.");
- add_com ("ftpload <file>", class_obscure, e7000_ftp_command,
+ add_com ("ftpload", class_obscure, e7000_ftp_command,
"Fetch and load a file from previously described place.");
add_com ("drain", class_obscure, e7000_drain_command,
"Drain pending e7000 text buffers.");
+
+ add_show_from_set (add_set_cmd ("usehardbreakpoints", no_class,
+ var_integer, (char *)&use_hard_breakpoints,
+ "Set use of hardware breakpoints for all breakpoints.\n", &setlist),
+ &showlist);
}
projects / deliverable / binutils-gdb.git / blobdiff