-/* Remote debugging interface for Hitachi E7000 ICE, for GDB
- Copyright 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
- Free Software Foundation, Inc.
+/* Remote debugging interface for Renesas E7000 ICE, for GDB
+
+ Copyright (C) 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+ 2002, 2003, 2004, 2006 Free Software Foundation, Inc.
+
Contributed by Cygnus Support.
Written by Steve Chamberlain for Cygnus Support.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ Boston, MA 02110-1301, USA. */
-/* The E7000 is an in-circuit emulator for the Hitachi H8/300-H and
- Hitachi-SH processor. It has serial port and a lan port.
+/* The E7000 is an in-circuit emulator for the Renesas H8/300-H and
+ Renesas-SH processor. It has serial port and a lan port.
The monitor command set makes it difficult to load large ammounts of
data over the lan without using ftp - so try not to issue load
#include "value.h"
#include "command.h"
#include "gdb_string.h"
+#include "exceptions.h"
#include "gdbcmd.h"
#include <sys/types.h>
#include "serial.h"
#define SR_REGNUM -1
#endif
-extern void notice_quit (void);
-
extern void report_transfer_performance (unsigned long, time_t, time_t);
extern char *sh_processor_type;
static int e7000_parse_device (char *args, char *dev_name, int baudrate);
/* Variables. */
-static serial_t e7000_desc;
+static struct serial *e7000_desc;
/* Allow user to chose between using hardware breakpoints or memory. */
static int use_hard_breakpoints = 0; /* use sw breakpoints by default */
puts_e7000debug (char *buf)
{
if (!e7000_desc)
- error ("Use \"target e7000 ...\" first.");
+ error (_("Use \"target e7000 ...\" first."));
if (remote_debug)
printf_unfiltered ("Sending %s\n", buf);
- if (SERIAL_WRITE (e7000_desc, buf, strlen (buf)))
- fprintf_unfiltered (gdb_stderr, "SERIAL_WRITE failed: %s\n", safe_strerror (errno));
+ if (serial_write (e7000_desc, buf, strlen (buf)))
+ fprintf_unfiltered (gdb_stderr, "serial_write failed: %s\n", safe_strerror (errno));
/* And expect to see it echoed, unless using the pc interface */
#if 0
char b[1];
b[0] = x;
- SERIAL_WRITE (e7000_desc, b, 1);
+ serial_write (e7000_desc, b, 1);
}
static void
write_e7000 (char *s)
{
- SERIAL_WRITE (e7000_desc, s, strlen (s));
+ serial_write (e7000_desc, s, strlen (s));
}
static int
do
{
- c = SERIAL_READCHAR (e7000_desc, timeout);
+ c = serial_readchar (e7000_desc, timeout);
}
while (c > 127);
if (timeout == 0)
return -1;
echo = 0;
- error ("Timeout reading from remote system.");
+ error (_("Timeout reading from remote system."));
}
else if (c < 0)
- error ("Serial communication error");
+ error (_("Serial communication error"));
if (remote_debug)
{
while (1)
{
c = readchar (timeout);
-#if 0
- notice_quit ();
- if (quit_flag == 1)
- {
- if (ctrl_c)
- {
- putchar_e7000 (CTRLC);
- --ctrl_c;
- }
- else
- {
- quit ();
- }
- }
-#endif
if (echo)
{
val = 0;
for (j = 0; j < 8; j++)
val = (val << 4) + get_hex_digit (j == 0);
- supply_register (regno++, (char *) &val);
+ regcache_raw_supply (current_regcache, regno++, (char *) &val);
}
}
#endif
user types "run" after having attached. */
static void
-e7000_create_inferior (char *execfile, char *args, char **env)
+e7000_create_inferior (char *execfile, char *args, char **env,
+ int from_tty)
{
int entry_pt;
if (args && *args)
- error ("Can't pass arguments to remote E7000DEBUG process");
+ error (_("Can't pass arguments to remote E7000DEBUG process"));
if (execfile == 0 || exec_bfd == 0)
- error ("No executable file specified");
+ error (_("No executable file specified"));
entry_pt = (int) bfd_get_start_address (exec_bfd);
target_terminal_inferior ();
/* insert_step_breakpoint (); FIXME, do we need this? */
- proceed ((CORE_ADDR) entry_pt, -1, 0); /* Let 'er rip... */
+ write_pc ((CORE_ADDR) entry_pt);
}
/* Open a connection to a remote debugger. NAME is the filename used
}
else
{
- error ("Syntax is ftplogin <machine> <user> <passwd> <directory>");
+ error (_("Syntax is ftplogin <machine> <user> <passwd> <directory>"));
}
}
if (n != 1 && n != 2)
{
- error ("Bad arguments. Usage:\ttarget e7000 <device> <speed>\n\
+ error (_("Bad arguments. Usage:\ttarget e7000 <device> <speed>\n\
or \t\ttarget e7000 <host>[:<port>]\n\
or \t\ttarget e7000 tcp_remote <host>[:<port>]\n\
-or \t\ttarget e7000 pc\n");
+or \t\ttarget e7000 pc\n"));
}
-#if !defined(__GO32__) && !defined(_WIN32)
+#if !defined(__GO32__) && !defined(_WIN32) && !defined(__CYGWIN__)
/* FIXME! test for ':' is ambiguous */
if (n == 1 && strchr (dev_name, ':') == 0)
{
if (!sync)
{
fprintf_unfiltered (gdb_stderr, "Giving up after %d tries...\n", try);
- error ("Unable to synchronize with target.\n");
+ error (_("Unable to synchronize with target."));
}
puts_e7000debug ("\r");
flush_cached_frames ();
registers_changed ();
stop_pc = read_pc ();
- set_current_frame (create_new_frame (read_fp (), stop_pc));
- select_frame (get_current_frame (), 0);
- print_stack_frame (selected_frame, -1, 1);
+ print_stack_frame (get_selected_frame (NULL), 0, SRC_AND_LOC);
return 1;
}
push_target (&e7000_ops);
- e7000_desc = SERIAL_OPEN (dev_name);
+ e7000_desc = serial_open (dev_name);
if (!e7000_desc)
perror_with_name (dev_name);
- SERIAL_SETBAUDRATE (e7000_desc, baudrate);
- SERIAL_RAW (e7000_desc);
-
-#ifdef GDB_TARGET_IS_H8300
- h8300hmode = 1;
-#endif
+ if (serial_setbaudrate (e7000_desc, baudrate))
+ {
+ serial_close (e7000_desc);
+ perror_with_name (dev_name);
+ }
+ serial_raw (e7000_desc);
/* Start the remote connection; if error (0), discard this target.
In particular, if the user quits, be sure to discard it
{
if (e7000_desc)
{
- SERIAL_CLOSE (e7000_desc);
+ serial_close (e7000_desc);
e7000_desc = 0;
}
}
/* Tell the remote machine to resume. */
static void
-e7000_resume (int pid, int step, enum target_signal sigal)
+e7000_resume (ptid_t ptid, int step, enum target_signal sigal)
{
if (step)
puts_e7000debug ("S\r");
return (high << 4) + low;
}
-void
+static void
fetch_regs_from_dump (int (*nextchar) (), char *want)
{
int regno;
- char buf[MAX_REGISTER_RAW_SIZE];
+ char buf[MAX_REGISTER_SIZE];
int thischar = nextchar ();
+ if (want == NULL)
+ internal_error (__FILE__, __LINE__, _("Register set not selected."));
+
while (*want)
{
switch (*want)
}
else
{
- error ("out of sync in fetch registers wanted <%s>, got <%c 0x%x>",
+ error (_("out of sync in fetch registers wanted <%s>, got <%c 0x%x>"),
want, thischar, thischar);
}
want++;
break;
#endif
-#ifdef FP_REGNUM
+#ifdef DEPRECATED_FP_REGNUM
case 'f':
- regno = FP_REGNUM;
+ regno = DEPRECATED_FP_REGNUM;
want++;
break;
#endif
}
else
- internal_error (__FILE__, __LINE__, "failed internal consistency check");
+ internal_error (__FILE__, __LINE__, _("failed internal consistency check"));
}
store_signed_integer (buf,
- REGISTER_RAW_SIZE (regno),
+ register_size (current_gdbarch, regno),
(LONGEST) get_hex (&thischar));
- supply_register (regno, buf);
+ regcache_raw_supply (current_regcache, regno, buf);
break;
}
}
e7000_fetch_registers (void)
{
int regno;
- char *wanted;
+ char *wanted = NULL;
+ int realregs = 0;
puts_e7000debug ("R\r");
if (TARGET_ARCHITECTURE->arch == bfd_arch_sh)
{
wanted = want_sh;
+ realregs = 59;
switch (TARGET_ARCHITECTURE->mach)
{
case bfd_mach_sh3:
wanted = want_sh3;
}
}
-#ifdef GDB_TARGET_IS_H8300
if (TARGET_ARCHITECTURE->arch == bfd_arch_h8300)
{
- if (h8300smode)
- wanted = want_h8300s;
- else
- wanted = want_h8300h;
+ wanted = want_h8300h;
+ realregs = 10;
+ switch (TARGET_ARCHITECTURE->mach)
+ {
+ case bfd_mach_h8300s:
+ case bfd_mach_h8300sn:
+ case bfd_mach_h8300sx:
+ case bfd_mach_h8300sxn:
+ wanted = want_h8300s;
+ realregs = 11;
+ }
}
-#endif
fetch_regs_from_dump (gch, wanted);
/* And supply the extra ones the simulator uses */
- for (regno = NUM_REALREGS; regno < NUM_REGS; regno++)
+ for (regno = realregs; regno < NUM_REGS; regno++)
{
int buf = 0;
- supply_register (regno, (char *) (&buf));
+ regcache_raw_supply (current_regcache, regno, (char *) (&buf));
}
}
e7000_store_registers (void)
{
int regno;
+ int realregs = 0;
- for (regno = 0; regno < NUM_REALREGS; regno++)
+ if (TARGET_ARCHITECTURE->arch == bfd_arch_sh)
+ realregs = 59;
+ if (TARGET_ARCHITECTURE->arch == bfd_arch_h8300) {
+ realregs = ((TARGET_ARCHITECTURE->mach == bfd_mach_h8300s ||
+ TARGET_ARCHITECTURE->mach == bfd_mach_h8300sn ||
+ TARGET_ARCHITECTURE->mach == bfd_mach_h8300sx ||
+ TARGET_ARCHITECTURE->mach == bfd_mach_h8300sxn) ? 11 : 10);
+ }
+
+ for (regno = 0; regno < realregs; regno++)
e7000_store_register (regno);
registers_changed ();
{
if (regno <= 7)
{
- sprintf (buf, ".ER%d %lx\r", regno, read_register (regno));
+ sprintf (buf, ".ER%d %s\r", regno, phex_nz (read_register (regno), 0));
puts_e7000debug (buf);
}
else if (regno == PC_REGNUM)
{
- sprintf (buf, ".PC %lx\r", read_register (regno));
+ sprintf (buf, ".PC %s\r", phex_nz (read_register (regno), 0));
puts_e7000debug (buf);
}
#ifdef CCR_REGNUM
else if (regno == CCR_REGNUM)
{
- sprintf (buf, ".CCR %lx\r", read_register (regno));
+ sprintf (buf, ".CCR %s\r", phex_nz (read_register (regno), 0));
puts_e7000debug (buf);
}
#endif
{
if (regno == PC_REGNUM)
{
- sprintf (buf, ".PC %lx\r", read_register (regno));
+ sprintf (buf, ".PC %s\r", phex_nz (read_register (regno), 0));
puts_e7000debug (buf);
}
else if (regno == SR_REGNUM)
{
- sprintf (buf, ".SR %lx\r", read_register (regno));
+ sprintf (buf, ".SR %s\r", phex_nz (read_register (regno), 0));
puts_e7000debug (buf);
}
else if (regno == PR_REGNUM)
{
- sprintf (buf, ".PR %lx\r", read_register (regno));
+ sprintf (buf, ".PR %s\r", phex_nz (read_register (regno), 0));
puts_e7000debug (buf);
}
else if (regno == GBR_REGNUM)
{
- sprintf (buf, ".GBR %lx\r", read_register (regno));
+ sprintf (buf, ".GBR %s\r", phex_nz (read_register (regno), 0));
puts_e7000debug (buf);
}
else if (regno == VBR_REGNUM)
{
- sprintf (buf, ".VBR %lx\r", read_register (regno));
+ sprintf (buf, ".VBR %s\r", phex_nz (read_register (regno), 0));
puts_e7000debug (buf);
}
else if (regno == MACH_REGNUM)
{
- sprintf (buf, ".MACH %lx\r", read_register (regno));
+ sprintf (buf, ".MACH %s\r", phex_nz (read_register (regno), 0));
puts_e7000debug (buf);
}
else if (regno == MACL_REGNUM)
{
- sprintf (buf, ".MACL %lx\r", read_register (regno));
+ sprintf (buf, ".MACL %s\r", phex_nz (read_register (regno), 0));
puts_e7000debug (buf);
}
else
{
- sprintf (buf, ".R%d %lx\r", regno, read_register (regno));
+ sprintf (buf, ".R%d %s\r", regno, phex_nz (read_register (regno), 0));
puts_e7000debug (buf);
}
}
if (((memaddr + i) & 3) == 0 && (i + 3 < len))
{
/* Can be done with a long word */
- sprintf (buf, "m %lx %x%02x%02x%02x;l\r",
- memaddr + i,
+ sprintf (buf, "m %s %x%02x%02x%02x;l\r",
+ paddr_nz (memaddr + i),
myaddr[i], myaddr[i + 1], myaddr[i + 2], myaddr[i + 3]);
puts_e7000debug (buf);
i += 3;
}
else
{
- sprintf (buf, "m %lx %x\r", memaddr + i, myaddr[i]);
+ sprintf (buf, "m %s %x\r", paddr_nz (memaddr + i), myaddr[i]);
puts_e7000debug (buf);
}
}
compose[where++] = '\n';
compose[where++] = 0;
- SERIAL_WRITE (e7000_desc, compose, where);
+ serial_write (e7000_desc, compose, where);
j = readchar (0);
if (j == -1)
{
{
/* Hmm, it's trying to tell us something */
expect (":");
- error ("Error writing memory");
+ error (_("Error writing memory"));
}
else
{
return 0;
}
- sprintf (buf, "m %lx;l\r", memaddr);
+ sprintf (buf, "m %s;l\r", paddr_nz (memaddr));
puts_e7000debug (buf);
for (count = 0; count < len; count += 4)
return 0;
}
- sprintf (buf, "d %lx %lx\r", memaddr, memaddr + len - 1);
+ sprintf (buf, "d %s %s\r", paddr_nz (memaddr), paddr_nz (memaddr + len - 1));
puts_e7000debug (buf);
count = 0;
if (c != ENQ)
{
/* Got an error */
- error ("Memory read error");
+ error (_("Memory read error"));
}
putchar_e7000 (ACK);
expect ("SV s");
Returns the number of bytes transferred. */
static int
-e7000_xfer_inferior_memory (CORE_ADDR memaddr, char *myaddr,
- int len, int write,
- struct mem_attrib *attrib ATTRIBUTE_UNUSED,
- struct target_ops *target ATTRIBUTE_UNUSED)
+e7000_xfer_inferior_memory (CORE_ADDR memaddr, gdb_byte *myaddr, int len,
+ int write, struct mem_attrib *attrib,
+ struct target_ops *target)
{
if (write)
return e7000_write_inferior_memory (memaddr, myaddr, len);
else if (strncmp (arg, "-nostart", strlen (arg)) == 0)
nostart = 1;
else
- error ("unknown option `%s'", arg);
+ error (_("unknown option `%s'"), arg);
}
if (!filename)
old_chain = make_cleanup_bfd_close (pbfd);
if (!bfd_check_format (pbfd, bfd_object))
- error ("\"%s\" is not an object file: %s", filename,
+ error (_("\"%s\" is not an object file: %s"), filename,
bfd_errmsg (bfd_get_error ()));
start_time = time (NULL);
file_ptr fptr;
section_address = bfd_get_section_vma (pbfd, section);
- section_size = bfd_get_section_size_before_reloc (section);
+ section_size = bfd_get_section_size (section);
if (!quiet)
- printf_filtered ("[Loading section %s at 0x%x (%ud bytes)]\n",
+ printf_filtered ("[Loading section %s at 0x%s (%s bytes)]\n",
bfd_get_section_name (pbfd, section),
- section_address,
- section_size);
+ paddr_nz (section_address),
+ paddr_u (section_size));
fptr = 0;
bfd_get_section_contents (pbfd, section, buf + 10, fptr, count);
- if (SERIAL_WRITE (e7000_desc, buf, count + 10))
+ if (serial_write (e7000_desc, buf, count + 10))
fprintf_unfiltered (gdb_stderr,
- "e7000_load: SERIAL_WRITE failed: %s\n",
+ "e7000_load: serial_write failed: %s\n",
safe_strerror (errno));
expect ("OK");
if (exec_bfd)
write_pc (bfd_get_start_address (exec_bfd));
- inferior_pid = 0; /* No process now */
+ inferior_ptid = null_ptid; /* No process now */
/* This is necessary because many things were based on the PC at the time that
we attached to the monitor, which is no longer valid now that we have loaded
entry = bfd_get_start_address (pbfd);
if (!quiet)
- printf_unfiltered ("[Starting %s at 0x%x]\n", filename, entry);
+ printf_unfiltered ("[Starting %s at 0x%s]\n", filename, paddr_nz (entry));
/* start_routine (entry); */
}
{0};
static int
-e7000_insert_breakpoint (CORE_ADDR addr, char *shadow)
+e7000_insert_breakpoint (struct bp_target_info *bp_tgt)
{
+ CORE_ADDR addr = bp_tgt->placed_address;
int i;
char buf[200];
#if 0
#ifdef HARD_BREAKPOINTS
if (BC_BREAKPOINTS)
{
- sprintf (buf, "BC%d A=%lx\r", i + 1, addr);
+ sprintf (buf, "BC%d A=%s\r", i + 1, paddr_nz (addr));
puts_e7000debug (buf);
}
else
{
- sprintf (buf, "B %lx\r", addr);
+ sprintf (buf, "B %s\r", paddr_nz (addr));
puts_e7000debug (buf);
}
#else
#if 0
- e7000_read_inferior_memory (addr, shadow, 2);
+ bp_tgt->shadow_len = 2;
+ e7000_read_inferior_memory (addr, bp_tgt->shadow_contents, 2);
e7000_write_inferior_memory (addr, nop, 2);
#endif
return 0;
}
- error ("Too many breakpoints ( > %d) for the E7000\n",
+ error (_("Too many breakpoints ( > %d) for the E7000."),
MAX_E7000DEBUG_BREAKPOINTS);
return 1;
}
static int
-e7000_remove_breakpoint (CORE_ADDR addr, char *shadow)
+e7000_remove_breakpoint (struct bp_target_info *bp_tgt)
{
+ CORE_ADDR addr = bp_tgt->placed_address;
int i;
char buf[200];
}
else
{
- sprintf (buf, "B - %lx\r", addr);
+ sprintf (buf, "B - %s\r", paddr_nz (addr));
puts_e7000debug (buf);
}
expect_prompt ();
#else
- sprintf (buf, "B - %lx\r", addr);
+ sprintf (buf, "B - %s\r", paddr_nz (addr));
puts_e7000debug (buf);
expect_prompt ();
#if 0
/* Replace the insn under the break */
- e7000_write_inferior_memory (addr, shadow, 2);
+ e7000_write_inferior_memory (addr, bp_tgt->shadow_contents,
+ bp_tgt->shadow_len);
#endif
#endif
return 0;
}
-
- warning ("Can't find breakpoint associated with 0x%lx\n", addr);
+
+ warning (_("Can't find breakpoint associated with 0x%s."), paddr_nz (addr));
return 1;
}
echo = 0;
if (!e7000_desc)
- error ("e7000 target not open.");
+ error (_("e7000 target not open."));
if (!args)
{
puts_e7000debug ("\r");
puts_e7000debug ("end\r");
putchar_e7000 (CTRLC);
- while ((c = readchar (1) != -1))
+ while ((c = readchar (1)) != -1)
{
if (quit_flag)
{
/* Suck characters, if a string match, then return the strings index
otherwise echo them. */
-int
+static int
expect_n (char **strings)
{
char *(ptr[10]);
char buf2[200];
store_signed_integer (buf,
- REGISTER_RAW_SIZE (PC_REGNUM),
+ register_size (current_gdbarch, PC_REGNUM),
read_register (PC_REGNUM) - 2);
- supply_register (PC_REGNUM, buf);
- sprintf (buf2, ".PC %lx\r", read_register (PC_REGNUM));
+ regcache_raw_supply (current_regcache, PC_REGNUM, buf);
+ sprintf (buf2, ".PC %s\r", phex_nz (read_register (PC_REGNUM), 0));
puts_e7000debug (buf2);
}
/* Wait until the remote machine stops, then return, storing status in
STATUS just as `wait' would. */
-static int
-e7000_wait (int pid, struct target_waitstatus *status)
+static ptid_t
+e7000_wait (ptid_t ptid, struct target_waitstatus *status)
{
int stop_reason;
int regno;
int running_count = 0;
int had_sleep = 0;
int loop = 1;
- char *wanted_nopc;
+ char *wanted_nopc = NULL;
+ int realregs = 0;
/* Then echo chars until PC= string seen */
gch (); /* Drop cr */
if (TARGET_ARCHITECTURE->arch == bfd_arch_sh)
{
wanted_nopc = want_nopc_sh;
+ realregs = 59;
switch (TARGET_ARCHITECTURE->mach)
{
case bfd_mach_sh3:
wanted_nopc = want_nopc_sh3;
}
}
-#ifdef GDB_TARGET_IS_H8300
if (TARGET_ARCHITECTURE->arch == bfd_arch_h8300)
{
- if (h8300smode)
- wanted_nopc = want_nopc_h8300s;
- else
- wanted_nopc = want_nopc_h8300h;
+ wanted_nopc = want_nopc_h8300h;
+ realregs = 10;
+ switch (TARGET_ARCHITECTURE->mach)
+ {
+ case bfd_mach_h8300s:
+ case bfd_mach_h8300sn:
+ case bfd_mach_h8300sx:
+ case bfd_mach_h8300sxn:
+ wanted_nopc = want_nopc_h8300s;
+ realregs = 11;
+ }
}
-#endif
fetch_regs_from_dump (gch, wanted_nopc);
/* And supply the extra ones the simulator uses */
- for (regno = NUM_REALREGS; regno < NUM_REGS; regno++)
+ for (regno = realregs; regno < NUM_REGS; regno++)
{
int buf = 0;
- supply_register (regno, (char *) &buf);
+ regcache_raw_supply (current_regcache, regno, (char *) &buf);
}
stop_reason = why_stop ();
break;
default:
/* Get the user's attention - this should never happen. */
- internal_error (__FILE__, __LINE__, "failed internal consistency check");
+ internal_error (__FILE__, __LINE__, _("failed internal consistency check"));
}
- return 0;
+ return inferior_ptid;
}
/* Stop the running program. */
init_e7000_ops (void)
{
e7000_ops.to_shortname = "e7000";
- e7000_ops.to_longname = "Remote Hitachi e7000 target";
- e7000_ops.to_doc = "Use a remote Hitachi e7000 ICE connected by a serial line;\n\
+ e7000_ops.to_longname = "Remote Renesas e7000 target";
+ e7000_ops.to_doc = "Use a remote Renesas e7000 ICE connected by a serial line;\n\
or a network connection.\n\
Arguments are the name of the device for the serial line,\n\
the speed to connect at in bits per second.\n\
target e7000 foobar";
e7000_ops.to_open = e7000_open;
e7000_ops.to_close = e7000_close;
- e7000_ops.to_attach = 0;
- e7000_ops.to_post_attach = NULL;
- e7000_ops.to_require_attach = NULL;
e7000_ops.to_detach = e7000_detach;
- e7000_ops.to_require_detach = NULL;
e7000_ops.to_resume = e7000_resume;
e7000_ops.to_wait = e7000_wait;
- e7000_ops.to_post_wait = NULL;
e7000_ops.to_fetch_registers = e7000_fetch_register;
e7000_ops.to_store_registers = e7000_store_register;
e7000_ops.to_prepare_to_store = e7000_prepare_to_store;
- e7000_ops.to_xfer_memory = e7000_xfer_inferior_memory;
+ e7000_ops.deprecated_xfer_memory = e7000_xfer_inferior_memory;
e7000_ops.to_files_info = e7000_files_info;
e7000_ops.to_insert_breakpoint = e7000_insert_breakpoint;
e7000_ops.to_remove_breakpoint = e7000_remove_breakpoint;
- e7000_ops.to_terminal_init = 0;
- e7000_ops.to_terminal_inferior = 0;
- e7000_ops.to_terminal_ours_for_output = 0;
- e7000_ops.to_terminal_ours = 0;
- e7000_ops.to_terminal_info = 0;
e7000_ops.to_kill = e7000_kill;
e7000_ops.to_load = e7000_load;
- e7000_ops.to_lookup_symbol = 0;
e7000_ops.to_create_inferior = e7000_create_inferior;
- e7000_ops.to_post_startup_inferior = NULL;
- e7000_ops.to_acknowledge_created_inferior = NULL;
- e7000_ops.to_clone_and_follow_inferior = NULL;
- e7000_ops.to_post_follow_inferior_by_clone = NULL;
- e7000_ops.to_insert_fork_catchpoint = NULL;
- e7000_ops.to_remove_fork_catchpoint = NULL;
- e7000_ops.to_insert_vfork_catchpoint = NULL;
- e7000_ops.to_remove_vfork_catchpoint = NULL;
- e7000_ops.to_has_forked = NULL;
- e7000_ops.to_has_vforked = NULL;
- e7000_ops.to_can_follow_vfork_prior_to_exec = NULL;
- e7000_ops.to_post_follow_vfork = NULL;
- e7000_ops.to_insert_exec_catchpoint = NULL;
- e7000_ops.to_remove_exec_catchpoint = NULL;
- e7000_ops.to_has_execd = NULL;
- e7000_ops.to_reported_exec_events_per_exec_call = NULL;
- e7000_ops.to_has_exited = NULL;
e7000_ops.to_mourn_inferior = e7000_mourn_inferior;
- e7000_ops.to_can_run = 0;
- e7000_ops.to_notice_signals = 0;
- e7000_ops.to_thread_alive = 0;
e7000_ops.to_stop = e7000_stop;
- e7000_ops.to_pid_to_exec_file = NULL;
- e7000_ops.to_core_file_to_sym_file = NULL;
e7000_ops.to_stratum = process_stratum;
- e7000_ops.DONT_USE = 0;
e7000_ops.to_has_all_memory = 1;
e7000_ops.to_has_memory = 1;
e7000_ops.to_has_stack = 1;
e7000_ops.to_has_registers = 1;
e7000_ops.to_has_execution = 1;
- e7000_ops.to_sections = 0;
- e7000_ops.to_sections_end = 0;
e7000_ops.to_magic = OPS_MAGIC;
};
+extern initialize_file_ftype _initialize_remote_e7000; /* -Wmissing-prototypes */
+
void
_initialize_remote_e7000 (void)
{
add_target (&e7000_ops);
add_com ("e7000", class_obscure, e7000_command,
- "Send a command to the e7000 monitor.");
+ _("Send a command to the e7000 monitor."));
add_com ("ftplogin", class_obscure, e7000_login_command,
- "Login to machine and change to directory.");
+ _("Login to machine and change to directory."));
add_com ("ftpload", class_obscure, e7000_ftp_command,
- "Fetch and load a file from previously described place.");
+ _("Fetch and load a file from previously described place."));
add_com ("drain", class_obscure, e7000_drain_command,
- "Drain pending e7000 text buffers.");
-
- add_show_from_set (add_set_cmd ("usehardbreakpoints", no_class,
- var_integer, (char *) &use_hard_breakpoints,
- "Set use of hardware breakpoints for all breakpoints.\n", &setlist),
- &showlist);
+ _("Drain pending e7000 text buffers."));
+
+ add_setshow_integer_cmd ("usehardbreakpoints", no_class,
+ &use_hard_breakpoints, _("\
+Set use of hardware breakpoints for all breakpoints."), _("\
+Show use of hardware breakpoints for all breakpoints."), NULL,
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setlist, &showlist);
}
projects / deliverable / binutils-gdb.git / blobdiff