-/* Remote debugging interface for Hitachi E7000 ICE, for GDB
- Copyright 1993, 1994, 1996, 1997, 1998 Free Software Foundation, Inc.
+/* Remote debugging interface for Renesas E7000 ICE, for GDB
+
+ Copyright 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+ 2002, 2003 Free Software Foundation, Inc.
+
Contributed by Cygnus Support.
Written by Steve Chamberlain for Cygnus Support.
Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
-/* The E7000 is an in-circuit emulator for the Hitachi H8/300-H and
- Hitachi-SH processor. It has serial port and a lan port.
+/* The E7000 is an in-circuit emulator for the Renesas H8/300-H and
+ Renesas-SH processor. It has serial port and a lan port.
The monitor command set makes it difficult to load large ammounts of
data over the lan without using ftp - so try not to issue load
#include "gdbarch.h"
#include "inferior.h"
#include "target.h"
-#include "wait.h"
#include "value.h"
#include "command.h"
-#include <signal.h>
#include "gdb_string.h"
#include "gdbcmd.h"
#include <sys/types.h>
#include "serial.h"
#include "remote-utils.h"
#include "symfile.h"
+#include "regcache.h"
#include <time.h>
#include <ctype.h>
#define ACK 0x06
#define CTRLZ 0x1a
-extern void notice_quit PARAMS ((void));
+/* This file is used by 2 different targets, sh-elf and h8300. The
+ h8300 is not multiarched and doesn't use the registers defined in
+ tm-sh.h. To avoid using a macro GDB_TARGET_IS_SH, we do runtime check
+ of the target, which requires that these namse below are always
+ defined also in the h8300 case. */
+
+#if !defined (PR_REGNUM)
+#define PR_REGNUM -1
+#endif
+#if !defined (GBR_REGNUM)
+#define GBR_REGNUM -1
+#endif
+#if !defined (VBR_REGNUM)
+#define VBR_REGNUM -1
+#endif
+#if !defined (MACH_REGNUM)
+#define MACH_REGNUM -1
+#endif
+#if !defined (MACL_REGNUM)
+#define MACL_REGNUM -1
+#endif
+#if !defined (SR_REGNUM)
+#define SR_REGNUM -1
+#endif
-extern void report_transfer_performance PARAMS ((unsigned long,
- time_t, time_t));
+extern void report_transfer_performance (unsigned long, time_t, time_t);
extern char *sh_processor_type;
/* Local function declarations. */
-static void e7000_close PARAMS ((int));
+static void e7000_close (int);
-static void e7000_fetch_register PARAMS ((int));
+static void e7000_fetch_register (int);
-static void e7000_store_register PARAMS ((int));
+static void e7000_store_register (int);
-static void e7000_command PARAMS ((char *, int));
+static void e7000_command (char *, int);
-static void e7000_login_command PARAMS ((char *, int));
+static void e7000_login_command (char *, int);
-static void e7000_ftp_command PARAMS ((char *, int));
+static void e7000_ftp_command (char *, int);
-static void e7000_drain_command PARAMS ((char *, int));
+static void e7000_drain_command (char *, int);
-static void expect PARAMS ((char *));
+static void expect (char *);
-static void expect_full_prompt PARAMS ((void));
+static void expect_full_prompt (void);
-static void expect_prompt PARAMS ((void));
+static void expect_prompt (void);
-static int e7000_parse_device PARAMS ((char *args, char *dev_name,
- int baudrate));
+static int e7000_parse_device (char *args, char *dev_name, int baudrate);
/* Variables. */
-static serial_t e7000_desc;
+static struct serial *e7000_desc;
/* Allow user to chose between using hardware breakpoints or memory. */
static int use_hard_breakpoints = 0; /* use sw breakpoints by default */
/* Send data to e7000debug. */
static void
-puts_e7000debug (buf)
- char *buf;
+puts_e7000debug (char *buf)
{
if (!e7000_desc)
error ("Use \"target e7000 ...\" first.");
if (remote_debug)
printf_unfiltered ("Sending %s\n", buf);
- if (SERIAL_WRITE (e7000_desc, buf, strlen (buf)))
- fprintf_unfiltered (gdb_stderr, "SERIAL_WRITE failed: %s\n", safe_strerror (errno));
+ if (serial_write (e7000_desc, buf, strlen (buf)))
+ fprintf_unfiltered (gdb_stderr, "serial_write failed: %s\n", safe_strerror (errno));
/* And expect to see it echoed, unless using the pc interface */
#if 0
}
static void
-putchar_e7000 (x)
- int x;
+putchar_e7000 (int x)
{
char b[1];
b[0] = x;
- SERIAL_WRITE (e7000_desc, b, 1);
+ serial_write (e7000_desc, b, 1);
}
static void
-write_e7000 (s)
- char *s;
+write_e7000 (char *s)
{
- SERIAL_WRITE (e7000_desc, s, strlen (s));
+ serial_write (e7000_desc, s, strlen (s));
}
static int
-normal (x)
- int x;
+normal (int x)
{
if (x == '\n')
return '\r';
returns -1, else returns next char. Discards chars > 127. */
static int
-readchar (timeout)
- int timeout;
+readchar (int timeout)
{
int c;
do
{
- c = SERIAL_READCHAR (e7000_desc, timeout);
+ c = serial_readchar (e7000_desc, timeout);
}
while (c > 127);
#if 0
char *
-tl (x)
+tl (int x)
{
static char b[8][10];
static int p;
out. Let the user break out immediately. */
static void
-expect (string)
- char *string;
+expect (char *string)
{
char *p = string;
int c;
while (1)
{
c = readchar (timeout);
-#if 0
- notice_quit ();
- if (quit_flag == 1)
- {
- if (ctrl_c)
- {
- putchar_e7000 (CTRLC);
- --ctrl_c;
- }
- else
- {
- quit ();
- }
- }
-#endif
if (echo)
{
into states from which we can't recover. */
static void
-expect_prompt ()
+expect_prompt (void)
{
expect (":");
}
static void
-expect_full_prompt ()
+expect_full_prompt (void)
{
expect ("\r:");
}
static int
-convert_hex_digit (ch)
- int ch;
+convert_hex_digit (int ch)
{
if (ch >= '0' && ch <= '9')
return ch - '0';
}
static int
-get_hex (start)
- int *start;
+get_hex (int *start)
{
int value = convert_hex_digit (*start);
int try;
them in registers starting at REGNO. */
static void
-get_hex_regs (n, regno)
- int n;
- int regno;
+get_hex_regs (int n, int regno)
{
long val;
int i;
user types "run" after having attached. */
static void
-e7000_create_inferior (execfile, args, env)
- char *execfile;
- char *args;
- char **env;
+e7000_create_inferior (char *execfile, char *args, char **env)
{
int entry_pt;
/* Grab the next token and buy some space for it */
static char *
-next (ptr)
- char **ptr;
+next (char **ptr)
{
char *p = *ptr;
char *s;
}
static void
-e7000_login_command (args, from_tty)
- char *args;
- int from_tty;
+e7000_login_command (char *args, int from_tty)
{
if (args)
{
/* Start an ftp transfer from the E7000 to a host */
static void
-e7000_ftp_command (args, from_tty)
- char *args;
- int from_tty;
+e7000_ftp_command (char *args, int from_tty)
{
/* FIXME: arbitrary limit on machine names and such. */
char buf[200];
}
static int
-e7000_parse_device (args, dev_name, baudrate)
- char *args;
- char *dev_name;
- int baudrate;
+e7000_parse_device (char *args, char *dev_name, int baudrate)
{
char junk[128];
int n = 0;
or \t\ttarget e7000 pc\n");
}
-#if !defined(__GO32__) && !defined(_WIN32)
+#if !defined(__GO32__) && !defined(_WIN32) && !defined(__CYGWIN__)
/* FIXME! test for ':' is ambiguous */
if (n == 1 && strchr (dev_name, ':') == 0)
{
/* Stub for catch_errors. */
static int
-e7000_start_remote (dummy)
- char *dummy;
+e7000_start_remote (void *dummy)
{
int loop;
int sync;
int try;
int quit_trying;
- immediate_quit = 1; /* Allow user to interrupt it */
+ immediate_quit++; /* Allow user to interrupt it */
/* Hello? Are you there? */
sync = 0;
if (!sync)
{
fprintf_unfiltered (gdb_stderr, "Giving up after %d tries...\n", try);
- error ("Unable to syncronize with target.\n");
+ error ("Unable to synchronize with target.\n");
}
puts_e7000debug ("\r");
puts_e7000debug ("b -\r"); /* Clear breakpoints */
expect_prompt ();
- immediate_quit = 0;
+ immediate_quit--;
/* This is really the job of start_remote however, that makes an assumption
that the target is about to print out a status message of some sort. That
flush_cached_frames ();
registers_changed ();
stop_pc = read_pc ();
- set_current_frame (create_new_frame (read_fp (), stop_pc));
- select_frame (get_current_frame (), 0);
- print_stack_frame (selected_frame, -1, 1);
+ print_stack_frame (get_selected_frame (), 0, SRC_AND_LOC);
return 1;
}
static void
-e7000_open (args, from_tty)
- char *args;
- int from_tty;
+e7000_open (char *args, int from_tty)
{
int n;
push_target (&e7000_ops);
- e7000_desc = SERIAL_OPEN (dev_name);
+ e7000_desc = serial_open (dev_name);
if (!e7000_desc)
perror_with_name (dev_name);
- SERIAL_SETBAUDRATE (e7000_desc, baudrate);
- SERIAL_RAW (e7000_desc);
-
-#ifdef GDB_TARGET_IS_H8300
- h8300hmode = 1;
-#endif
+ if (serial_setbaudrate (e7000_desc, baudrate))
+ {
+ serial_close (e7000_desc);
+ perror_with_name (dev_name);
+ }
+ serial_raw (e7000_desc);
/* Start the remote connection; if error (0), discard this target.
In particular, if the user quits, be sure to discard it
/* Close out all files and local state before this target loses control. */
static void
-e7000_close (quitting)
- int quitting;
+e7000_close (int quitting)
{
if (e7000_desc)
{
- SERIAL_CLOSE (e7000_desc);
+ serial_close (e7000_desc);
e7000_desc = 0;
}
}
when you want to detach and do something else with your gdb. */
static void
-e7000_detach (from_tty)
- int from_tty;
+e7000_detach (char *arg, int from_tty)
{
pop_target (); /* calls e7000_close to do the real work */
if (from_tty)
/* Tell the remote machine to resume. */
static void
-e7000_resume (pid, step, sig)
- int pid, step, sig;
+e7000_resume (ptid_t ptid, int step, enum target_signal sigal)
{
if (step)
puts_e7000debug ("S\r");
BREAK POINT
*/
-#ifdef GDB_TARGET_IS_H8300
-
char *want_h8300h = "PC=%p CCR=%c\n\
ER0 - ER3 %0 %1 %2 %3\n\
ER4 - ER7 %4 %5 %6 %7\n";
ER0 - ER3 %0 %1 %2 %3\n\
ER4 - ER7 %4 %5 %6 %7";
-#endif
-
-#ifdef GDB_TARGET_IS_SH
-
-char *want = "PC=%16 SR=%22\n\
+char *want_sh = "PC=%16 SR=%22\n\
PR=%17 GBR=%18 VBR=%19\n\
MACH=%20 MACL=%21\n\
R0-7 %0 %1 %2 %3 %4 %5 %6 %7\n\
R8-15 %8 %9 %10 %11 %12 %13 %14 %15\n";
-char *want_nopc = "%16 SR=%22\n\
+char *want_nopc_sh = "%16 SR=%22\n\
PR=%17 GBR=%18 VBR=%19\n\
MACH=%20 MACL=%21\n\
R0-7 %0 %1 %2 %3 %4 %5 %6 %7\n\
R0_BANK1-R3_BANK1 %33 %34 %35 %36\n\
R4_BANK1-R7_BANK1 %37 %38 %39 %40";
-char *want_sh3_nopc = "%16 SR=%22\n\
+char *want_nopc_sh3 = "%16 SR=%22\n\
PR=%17 GBR=%18 VBR=%19\n\
MACH=%20 MACL=%21 SSR=%22 SPC=%23\n\
R0-7 %0 %1 %2 %3 %4 %5 %6 %7\n\
R0_BANK1-R3_BANK1 %33 %34 %35 %36\n\
R4_BANK1-R7_BANK1 %37 %38 %39 %40";
-#endif
-
static int
-gch ()
+gch (void)
{
return readchar (timeout);
}
static unsigned int
-gbyte ()
+gbyte (void)
{
int high = convert_hex_digit (gch ());
int low = convert_hex_digit (gch ());
return (high << 4) + low;
}
-void
-fetch_regs_from_dump (nextchar, want)
- int (*nextchar) ();
- char *want;
+static void
+fetch_regs_from_dump (int (*nextchar) (), char *want)
{
int regno;
- char buf[MAX_REGISTER_RAW_SIZE];
+ char buf[MAX_REGISTER_SIZE];
int thischar = nextchar ();
+ if (want == NULL)
+ internal_error (__FILE__, __LINE__, "Register set not selected.");
+
while (*want)
{
switch (*want)
want++;
break;
#endif
-#ifdef FP_REGNUM
+#ifdef DEPRECATED_FP_REGNUM
case 'f':
- regno = FP_REGNUM;
+ regno = DEPRECATED_FP_REGNUM;
want++;
break;
#endif
}
else
- abort ();
+ internal_error (__FILE__, __LINE__, "failed internal consistency check");
}
store_signed_integer (buf,
- REGISTER_RAW_SIZE (regno),
- (LONGEST) get_hex (&thischar, nextchar));
+ DEPRECATED_REGISTER_RAW_SIZE (regno),
+ (LONGEST) get_hex (&thischar));
supply_register (regno, buf);
break;
}
}
static void
-e7000_fetch_registers ()
+e7000_fetch_registers (void)
{
int regno;
- char *wanted;
+ char *wanted = NULL;
puts_e7000debug ("R\r");
-#ifdef GDB_TARGET_IS_SH
- wanted = want;
if (TARGET_ARCHITECTURE->arch == bfd_arch_sh)
- switch (TARGET_ARCHITECTURE->mach)
- {
- case bfd_mach_sh3:
- case bfd_mach_sh3e:
- case bfd_mach_sh4:
- wanted = want_sh3;
- }
-#else
- if (h8300smode)
- wanted = want_h8300s;
- else
- wanted = want_h8300h;
-#endif
+ {
+ wanted = want_sh;
+ switch (TARGET_ARCHITECTURE->mach)
+ {
+ case bfd_mach_sh3:
+ case bfd_mach_sh3e:
+ case bfd_mach_sh4:
+ wanted = want_sh3;
+ }
+ }
+ if (TARGET_ARCHITECTURE->arch == bfd_arch_h8300)
+ {
+ wanted = want_h8300h;
+ switch (TARGET_ARCHITECTURE->mach)
+ {
+ case bfd_mach_h8300s:
+ case bfd_mach_h8300sn:
+ case bfd_mach_h8300sx:
+ case bfd_mach_h8300sxn:
+ wanted = want_h8300s;
+ }
+ }
+
fetch_regs_from_dump (gch, wanted);
/* And supply the extra ones the simulator uses */
errno value. */
static void
-e7000_fetch_register (regno)
- int regno;
+e7000_fetch_register (int regno)
{
e7000_fetch_registers ();
}
/* Store the remote registers from the contents of the block REGS. */
static void
-e7000_store_registers ()
+e7000_store_registers (void)
{
int regno;
/* Store register REGNO, or all if REGNO == 0. Return errno value. */
static void
-e7000_store_register (regno)
- int regno;
+e7000_store_register (int regno)
{
char buf[200];
return;
}
-#ifdef GDB_TARGET_IS_H8300
- if (regno <= 7)
- {
- sprintf (buf, ".ER%d %x\r", regno, read_register (regno));
- puts_e7000debug (buf);
- }
- else if (regno == PC_REGNUM)
- {
- sprintf (buf, ".PC %x\r", read_register (regno));
- puts_e7000debug (buf);
- }
- else if (regno == CCR_REGNUM)
+ if (TARGET_ARCHITECTURE->arch == bfd_arch_h8300)
{
- sprintf (buf, ".CCR %x\r", read_register (regno));
- puts_e7000debug (buf);
+ if (regno <= 7)
+ {
+ sprintf (buf, ".ER%d %s\r", regno, phex_nz (read_register (regno), 0));
+ puts_e7000debug (buf);
+ }
+ else if (regno == PC_REGNUM)
+ {
+ sprintf (buf, ".PC %s\r", phex_nz (read_register (regno), 0));
+ puts_e7000debug (buf);
+ }
+#ifdef CCR_REGNUM
+ else if (regno == CCR_REGNUM)
+ {
+ sprintf (buf, ".CCR %s\r", phex_nz (read_register (regno), 0));
+ puts_e7000debug (buf);
+ }
+#endif
}
-#endif /* GDB_TARGET_IS_H8300 */
-#ifdef GDB_TARGET_IS_SH
- switch (regno)
+ else if (TARGET_ARCHITECTURE->arch == bfd_arch_sh)
{
- default:
- sprintf (buf, ".R%d %x\r", regno, read_register (regno));
- puts_e7000debug (buf);
- break;
-
- case PC_REGNUM:
- sprintf (buf, ".PC %x\r", read_register (regno));
- puts_e7000debug (buf);
- break;
+ if (regno == PC_REGNUM)
+ {
+ sprintf (buf, ".PC %s\r", phex_nz (read_register (regno), 0));
+ puts_e7000debug (buf);
+ }
- case SR_REGNUM:
- sprintf (buf, ".SR %x\r", read_register (regno));
- puts_e7000debug (buf);
- break;
+ else if (regno == SR_REGNUM)
+ {
+ sprintf (buf, ".SR %s\r", phex_nz (read_register (regno), 0));
+ puts_e7000debug (buf);
+ }
- case PR_REGNUM:
- sprintf (buf, ".PR %x\r", read_register (regno));
- puts_e7000debug (buf);
- break;
+ else if (regno == PR_REGNUM)
+ {
+ sprintf (buf, ".PR %s\r", phex_nz (read_register (regno), 0));
+ puts_e7000debug (buf);
+ }
- case GBR_REGNUM:
- sprintf (buf, ".GBR %x\r", read_register (regno));
- puts_e7000debug (buf);
- break;
+ else if (regno == GBR_REGNUM)
+ {
+ sprintf (buf, ".GBR %s\r", phex_nz (read_register (regno), 0));
+ puts_e7000debug (buf);
+ }
- case VBR_REGNUM:
- sprintf (buf, ".VBR %x\r", read_register (regno));
- puts_e7000debug (buf);
- break;
+ else if (regno == VBR_REGNUM)
+ {
+ sprintf (buf, ".VBR %s\r", phex_nz (read_register (regno), 0));
+ puts_e7000debug (buf);
+ }
- case MACH_REGNUM:
- sprintf (buf, ".MACH %x\r", read_register (regno));
- puts_e7000debug (buf);
- break;
+ else if (regno == MACH_REGNUM)
+ {
+ sprintf (buf, ".MACH %s\r", phex_nz (read_register (regno), 0));
+ puts_e7000debug (buf);
+ }
- case MACL_REGNUM:
- sprintf (buf, ".MACL %x\r", read_register (regno));
- puts_e7000debug (buf);
- break;
+ else if (regno == MACL_REGNUM)
+ {
+ sprintf (buf, ".MACL %s\r", phex_nz (read_register (regno), 0));
+ puts_e7000debug (buf);
+ }
+ else
+ {
+ sprintf (buf, ".R%d %s\r", regno, phex_nz (read_register (regno), 0));
+ puts_e7000debug (buf);
+ }
}
-#endif /* GDB_TARGET_IS_SH */
-
expect_prompt ();
}
debugged. */
static void
-e7000_prepare_to_store ()
+e7000_prepare_to_store (void)
{
/* Do nothing, since we can store individual regs */
}
static void
-e7000_files_info ()
+e7000_files_info (struct target_ops *ops)
{
printf_unfiltered ("\tAttached to %s at %d baud.\n", dev_name, baudrate);
}
static int
-stickbyte (where, what)
- char *where;
- unsigned int what;
+stickbyte (char *where, unsigned int what)
{
static CONST char digs[] = "0123456789ABCDEF";
/* Write a small ammount of memory. */
static int
-write_small (memaddr, myaddr, len)
- CORE_ADDR memaddr;
- unsigned char *myaddr;
- int len;
+write_small (CORE_ADDR memaddr, unsigned char *myaddr, int len)
{
int i;
char buf[200];
if (((memaddr + i) & 3) == 0 && (i + 3 < len))
{
/* Can be done with a long word */
- sprintf (buf, "m %x %x%02x%02x%02x;l\r",
- memaddr + i,
+ sprintf (buf, "m %s %x%02x%02x%02x;l\r",
+ paddr_nz (memaddr + i),
myaddr[i], myaddr[i + 1], myaddr[i + 2], myaddr[i + 3]);
puts_e7000debug (buf);
i += 3;
}
else
{
- sprintf (buf, "m %x %x\r", memaddr + i, myaddr[i]);
+ sprintf (buf, "m %s %x\r", paddr_nz (memaddr + i), myaddr[i]);
puts_e7000debug (buf);
}
}
*/
static int
-write_large (memaddr, myaddr, len)
- CORE_ADDR memaddr;
- unsigned char *myaddr;
- int len;
+write_large (CORE_ADDR memaddr, unsigned char *myaddr, int len)
{
int i;
#define maxstride 128
compose[where++] = '\n';
compose[where++] = 0;
- SERIAL_WRITE (e7000_desc, compose, where);
+ serial_write (e7000_desc, compose, where);
j = readchar (0);
if (j == -1)
{
then. */
static int
-e7000_write_inferior_memory (memaddr, myaddr, len)
- CORE_ADDR memaddr;
- unsigned char *myaddr;
- int len;
+e7000_write_inferior_memory (CORE_ADDR memaddr, unsigned char *myaddr, int len)
{
if (len < 16 || using_tcp || using_pc)
return write_small (memaddr, myaddr, len);
*/
static int
-e7000_read_inferior_memory (memaddr, myaddr, len)
- CORE_ADDR memaddr;
- unsigned char *myaddr;
- int len;
+e7000_read_inferior_memory (CORE_ADDR memaddr, unsigned char *myaddr, int len)
{
int count;
int c;
return 0;
}
- sprintf (buf, "m %x;l\r", memaddr);
+ sprintf (buf, "m %s;l\r", paddr_nz (memaddr));
puts_e7000debug (buf);
for (count = 0; count < len; count += 4)
*/
static int
-e7000_read_inferior_memory_large (memaddr, myaddr, len)
- CORE_ADDR memaddr;
- unsigned char *myaddr;
- int len;
+e7000_read_inferior_memory_large (CORE_ADDR memaddr, unsigned char *myaddr,
+ int len)
{
int count;
int c;
return 0;
}
- sprintf (buf, "d %x %x\r", memaddr, memaddr + len - 1);
+ sprintf (buf, "d %s %s\r", paddr_nz (memaddr), paddr_nz (memaddr + len - 1));
puts_e7000debug (buf);
count = 0;
#if 0
static int
-fast_but_for_the_pause_e7000_read_inferior_memory (memaddr, myaddr, len)
- CORE_ADDR memaddr;
- char *myaddr;
- int len;
+fast_but_for_the_pause_e7000_read_inferior_memory (CORE_ADDR memaddr,
+ char *myaddr, int len)
{
int loop;
int c;
#endif
+/* Transfer LEN bytes between GDB address MYADDR and target address
+ MEMADDR. If WRITE is non-zero, transfer them to the target,
+ otherwise transfer them from the target. TARGET is unused.
+
+ Returns the number of bytes transferred. */
+
static int
-e7000_xfer_inferior_memory (memaddr, myaddr, len, write, target)
- CORE_ADDR memaddr;
- unsigned char *myaddr;
- int len;
- int write;
- struct target_ops *target; /* ignored */
+e7000_xfer_inferior_memory (CORE_ADDR memaddr, char *myaddr, int len,
+ int write, struct mem_attrib *attrib,
+ struct target_ops *target)
{
if (write)
return e7000_write_inferior_memory (memaddr, myaddr, len);
}
static void
-e7000_kill (args, from_tty)
- char *args;
- int from_tty;
+e7000_kill (void)
{
}
static void
-e7000_load (args, from_tty)
- char *args;
- int from_tty;
+e7000_load (char *args, int from_tty)
{
struct cleanup *old_chain;
asection *section;
perror_with_name (filename);
return;
}
- old_chain = make_cleanup ((make_cleanup_func) bfd_close, pbfd);
+ old_chain = make_cleanup_bfd_close (pbfd);
if (!bfd_check_format (pbfd, bfd_object))
error ("\"%s\" is not an object file: %s", filename,
section_size = bfd_get_section_size_before_reloc (section);
if (!quiet)
- printf_filtered ("[Loading section %s at 0x%x (%d bytes)]\n",
+ printf_filtered ("[Loading section %s at 0x%s (%s bytes)]\n",
bfd_get_section_name (pbfd, section),
- section_address,
- section_size);
+ paddr_nz (section_address),
+ paddr_u (section_size));
fptr = 0;
bfd_get_section_contents (pbfd, section, buf + 10, fptr, count);
- if (SERIAL_WRITE (e7000_desc, buf, count + 10))
+ if (serial_write (e7000_desc, buf, count + 10))
fprintf_unfiltered (gdb_stderr,
- "e7000_load: SERIAL_WRITE failed: %s\n",
+ "e7000_load: serial_write failed: %s\n",
safe_strerror (errno));
expect ("OK");
if (exec_bfd)
write_pc (bfd_get_start_address (exec_bfd));
- inferior_pid = 0; /* No process now */
+ inferior_ptid = null_ptid; /* No process now */
/* This is necessary because many things were based on the PC at the time that
we attached to the monitor, which is no longer valid now that we have loaded
entry = bfd_get_start_address (pbfd);
if (!quiet)
- printf_unfiltered ("[Starting %s at 0x%x]\n", filename, entry);
+ printf_unfiltered ("[Starting %s at 0x%s]\n", filename, paddr_nz (entry));
/* start_routine (entry); */
}
instructions. */
static void
-e7000_mourn_inferior ()
+e7000_mourn_inferior (void)
{
remove_breakpoints ();
unpush_target (&e7000_ops);
{0};
static int
-e7000_insert_breakpoint (addr, shadow)
- CORE_ADDR addr;
- unsigned char *shadow;
+e7000_insert_breakpoint (CORE_ADDR addr, char *shadow)
{
int i;
char buf[200];
#ifdef HARD_BREAKPOINTS
if (BC_BREAKPOINTS)
{
- sprintf (buf, "BC%d A=%x\r", i + 1, addr);
+ sprintf (buf, "BC%d A=%s\r", i + 1, paddr_nz (addr));
puts_e7000debug (buf);
}
else
{
- sprintf (buf, "B %x\r", addr);
+ sprintf (buf, "B %s\r", paddr_nz (addr));
puts_e7000debug (buf);
}
#else
}
static int
-e7000_remove_breakpoint (addr, shadow)
- CORE_ADDR addr;
- unsigned char *shadow;
+e7000_remove_breakpoint (CORE_ADDR addr, char *shadow)
{
int i;
char buf[200];
}
else
{
- sprintf (buf, "B - %x\r", addr);
+ sprintf (buf, "B - %s\r", paddr_nz (addr));
puts_e7000debug (buf);
}
expect_prompt ();
#else
- sprintf (buf, "B - %x\r", addr);
+ sprintf (buf, "B - %s\r", paddr_nz (addr));
puts_e7000debug (buf);
expect_prompt ();
return 0;
}
-
- warning ("Can't find breakpoint associated with 0x%x\n", addr);
+
+ warning ("Can't find breakpoint associated with 0x%s\n", paddr_nz (addr));
return 1;
}
is placed on the users terminal until the prompt is seen. */
static void
-e7000_command (args, fromtty)
- char *args;
- int fromtty;
+e7000_command (char *args, int fromtty)
{
/* FIXME: arbitrary limit on length of args. */
char buf[200];
static void
-e7000_drain_command (args, fromtty)
- char *args;
- int fromtty;
-
+e7000_drain_command (char *args, int fromtty)
{
int c;
puts_e7000debug ("end\r");
putchar_e7000 (CTRLC);
- while ((c = readchar (1) != -1))
+ while ((c = readchar (1)) != -1)
{
if (quit_flag)
{
#define NITEMS 7
static int
-why_stop ()
+why_stop (void)
{
static char *strings[NITEMS] =
{
/* Suck characters, if a string match, then return the strings index
otherwise echo them. */
-int
-expect_n (strings)
- char **strings;
+static int
+expect_n (char **strings)
{
char *(ptr[10]);
int n;
pc, and the simulators never do. */
static void
-sub2_from_pc ()
+sub2_from_pc (void)
{
char buf[4];
char buf2[200];
store_signed_integer (buf,
- REGISTER_RAW_SIZE (PC_REGNUM),
+ DEPRECATED_REGISTER_RAW_SIZE (PC_REGNUM),
read_register (PC_REGNUM) - 2);
supply_register (PC_REGNUM, buf);
- sprintf (buf2, ".PC %x\r", read_register (PC_REGNUM));
+ sprintf (buf2, ".PC %s\r", phex_nz (read_register (PC_REGNUM), 0));
puts_e7000debug (buf2);
}
/* Wait until the remote machine stops, then return, storing status in
STATUS just as `wait' would. */
-static int
-e7000_wait (pid, status)
- int pid;
- struct target_waitstatus *status;
+static ptid_t
+e7000_wait (ptid_t ptid, struct target_waitstatus *status)
{
int stop_reason;
int regno;
int running_count = 0;
int had_sleep = 0;
int loop = 1;
- char *wanted_nopc;
+ char *wanted_nopc = NULL;
/* Then echo chars until PC= string seen */
gch (); /* Drop cr */
/* Skip till the PC= */
expect ("=");
-#ifdef GDB_TARGET_IS_SH
- wanted_nopc = want_nopc;
if (TARGET_ARCHITECTURE->arch == bfd_arch_sh)
- switch (TARGET_ARCHITECTURE->mach)
- {
- case bfd_mach_sh3:
- case bfd_mach_sh3e:
- case bfd_mach_sh4:
- wanted_nopc = want_sh3_nopc;
- }
-#else
- if (h8300smode)
- wanted_nopc = want_nopc_h8300s;
- else
- wanted_nopc = want_nopc_h8300h;
-#endif
+ {
+ wanted_nopc = want_nopc_sh;
+ switch (TARGET_ARCHITECTURE->mach)
+ {
+ case bfd_mach_sh3:
+ case bfd_mach_sh3e:
+ case bfd_mach_sh4:
+ wanted_nopc = want_nopc_sh3;
+ }
+ }
+ if (TARGET_ARCHITECTURE->arch == bfd_arch_h8300)
+ {
+ wanted_nopc = want_nopc_h8300h;
+ switch (TARGET_ARCHITECTURE->mach)
+ {
+ case bfd_mach_h8300s:
+ case bfd_mach_h8300sn:
+ case bfd_mach_h8300sx:
+ case bfd_mach_h8300sxn:
+ wanted_nopc = want_nopc_h8300s;
+ }
+ }
fetch_regs_from_dump (gch, wanted_nopc);
/* And supply the extra ones the simulator uses */
break;
default:
/* Get the user's attention - this should never happen. */
- abort ();
+ internal_error (__FILE__, __LINE__, "failed internal consistency check");
}
- return 0;
+ return inferior_ptid;
}
/* Stop the running program. */
static void
-e7000_stop ()
+e7000_stop (void)
{
/* Sending a ^C is supposed to stop the running program. */
putchar_e7000 (CTRLC);
init_e7000_ops (void)
{
e7000_ops.to_shortname = "e7000";
- e7000_ops.to_longname = "Remote Hitachi e7000 target";
- e7000_ops.to_doc = "Use a remote Hitachi e7000 ICE connected by a serial line;\n\
+ e7000_ops.to_longname = "Remote Renesas e7000 target";
+ e7000_ops.to_doc = "Use a remote Renesas e7000 ICE connected by a serial line;\n\
or a network connection.\n\
Arguments are the name of the device for the serial line,\n\
the speed to connect at in bits per second.\n\
target e7000 foobar";
e7000_ops.to_open = e7000_open;
e7000_ops.to_close = e7000_close;
- e7000_ops.to_attach = 0;
- e7000_ops.to_post_attach = NULL;
- e7000_ops.to_require_attach = NULL;
e7000_ops.to_detach = e7000_detach;
- e7000_ops.to_require_detach = NULL;
e7000_ops.to_resume = e7000_resume;
e7000_ops.to_wait = e7000_wait;
- e7000_ops.to_post_wait = NULL;
e7000_ops.to_fetch_registers = e7000_fetch_register;
e7000_ops.to_store_registers = e7000_store_register;
e7000_ops.to_prepare_to_store = e7000_prepare_to_store;
e7000_ops.to_files_info = e7000_files_info;
e7000_ops.to_insert_breakpoint = e7000_insert_breakpoint;
e7000_ops.to_remove_breakpoint = e7000_remove_breakpoint;
- e7000_ops.to_terminal_init = 0;
- e7000_ops.to_terminal_inferior = 0;
- e7000_ops.to_terminal_ours_for_output = 0;
- e7000_ops.to_terminal_ours = 0;
- e7000_ops.to_terminal_info = 0;
e7000_ops.to_kill = e7000_kill;
e7000_ops.to_load = e7000_load;
- e7000_ops.to_lookup_symbol = 0;
e7000_ops.to_create_inferior = e7000_create_inferior;
- e7000_ops.to_post_startup_inferior = NULL;
- e7000_ops.to_acknowledge_created_inferior = NULL;
- e7000_ops.to_clone_and_follow_inferior = NULL;
- e7000_ops.to_post_follow_inferior_by_clone = NULL;
- e7000_ops.to_insert_fork_catchpoint = NULL;
- e7000_ops.to_remove_fork_catchpoint = NULL;
- e7000_ops.to_insert_vfork_catchpoint = NULL;
- e7000_ops.to_remove_vfork_catchpoint = NULL;
- e7000_ops.to_has_forked = NULL;
- e7000_ops.to_has_vforked = NULL;
- e7000_ops.to_can_follow_vfork_prior_to_exec = NULL;
- e7000_ops.to_post_follow_vfork = NULL;
- e7000_ops.to_insert_exec_catchpoint = NULL;
- e7000_ops.to_remove_exec_catchpoint = NULL;
- e7000_ops.to_has_execd = NULL;
- e7000_ops.to_reported_exec_events_per_exec_call = NULL;
- e7000_ops.to_has_exited = NULL;
e7000_ops.to_mourn_inferior = e7000_mourn_inferior;
- e7000_ops.to_can_run = 0;
- e7000_ops.to_notice_signals = 0;
- e7000_ops.to_thread_alive = 0;
e7000_ops.to_stop = e7000_stop;
- e7000_ops.to_pid_to_exec_file = NULL;
- e7000_ops.to_core_file_to_sym_file = NULL;
e7000_ops.to_stratum = process_stratum;
- e7000_ops.DONT_USE = 0;
e7000_ops.to_has_all_memory = 1;
e7000_ops.to_has_memory = 1;
e7000_ops.to_has_stack = 1;
e7000_ops.to_has_registers = 1;
e7000_ops.to_has_execution = 1;
- e7000_ops.to_sections = 0;
- e7000_ops.to_sections_end = 0;
e7000_ops.to_magic = OPS_MAGIC;
};
+extern initialize_file_ftype _initialize_remote_e7000; /* -Wmissing-prototypes */
+
void
-_initialize_remote_e7000 ()
+_initialize_remote_e7000 (void)
{
init_e7000_ops ();
add_target (&e7000_ops);
projects / deliverable / binutils-gdb.git / blobdiff