* configure.in: Don't comment out NATDEPFILES in the generated
[deliverable/binutils-gdb.git] / gdb / remote-m32r-sdi.c
index e8216bb57c95f9116029f725ac164c2b9d086a28..a2fc04682fef466c3b25343425467d44c1bc144f 100644 (file)
@@ -63,12 +63,6 @@ static int use_ib_breakpoints = 1;
 static int max_ib_breakpoints;
 static unsigned long bp_address[MAX_BREAKPOINTS];
 static unsigned char bp_data[MAX_BREAKPOINTS][4];
-static const unsigned char ib_bp_entry_enable[] = {
-  0x00, 0x00, 0x00, 0x06
-};
-static const unsigned char ib_bp_entry_disable[] = {
-  0x00, 0x00, 0x00, 0x00
-};
 
 /* dbt -> nop */
 static const unsigned char dbt_bp_entry[] = {
@@ -224,20 +218,72 @@ store_long_parameter (void *buf, long val)
   memcpy (buf, &val, 4);
 }
 
+static int
+send_cmd (unsigned char cmd)
+{
+  unsigned char buf[1];
+  buf[0] = cmd;
+  return send_data (buf, 1);
+}
+
+static int
+send_one_arg_cmd (unsigned char cmd, unsigned char arg1)
+{
+  unsigned char buf[2];
+  buf[0] = cmd;
+  buf[1] = arg1;
+  return send_data (buf, 2);
+}
+
+static int
+send_two_arg_cmd (unsigned char cmd, unsigned char arg1, unsigned long arg2)
+{
+  unsigned char buf[6];
+  buf[0] = cmd;
+  buf[1] = arg1;
+  store_long_parameter (buf + 2, arg2);
+  return send_data (buf, 6);
+}
+
+static int
+send_three_arg_cmd (unsigned char cmd, unsigned long arg1, unsigned long arg2,
+                   unsigned long arg3)
+{
+  unsigned char buf[13];
+  buf[0] = cmd;
+  store_long_parameter (buf + 1, arg1);
+  store_long_parameter (buf + 5, arg2);
+  store_long_parameter (buf + 9, arg3);
+  return send_data (buf, 13);
+}
+
+static unsigned char
+recv_char_data (void)
+{
+  unsigned char val;
+  recv_data (&val, 1);
+  return val;
+}
+
+static unsigned long
+recv_long_data (void)
+{
+  unsigned long val;
+  recv_data (&val, 4);
+  return ntohl (val);
+}
+
+
 /* Check if MMU is on */
 static void
 check_mmu_status (void)
 {
   unsigned long val;
-  unsigned char buf[2];
 
   /* Read PC address */
-  buf[0] = SDI_READ_CPU_REG;
-  buf[1] = SDI_REG_BPC;
-  if (send_data (buf, 2) == -1)
+  if (send_one_arg_cmd (SDI_READ_CPU_REG, SDI_REG_BPC) == -1)
     return;
-  recv_data (&val, 4);
-  val = ntohl (val);
+  val = recv_long_data ();
   if ((val & 0xc0000000) == 0x80000000)
     {
       mmu_on = 1;
@@ -245,12 +291,9 @@ check_mmu_status (void)
     }
 
   /* Read EVB address */
-  buf[0] = SDI_READ_CPU_REG;
-  buf[1] = SDI_REG_EVB;
-  if (send_data (buf, 2) == -1)
+  if (send_one_arg_cmd (SDI_READ_CPU_REG, SDI_REG_EVB) == -1)
     return;
-  recv_data (&val, 4);
-  val = ntohl (val);
+  val = recv_long_data ();
   if ((val & 0xc0000000) == 0x80000000)
     {
       mmu_on = 1;
@@ -308,7 +351,6 @@ m32r_open (char *args, int from_tty)
   struct sockaddr_in server_addr;
   char *port_str, hostname[256];
   int port;
-  unsigned char buf[2];
   int i, n;
   int yes = 1;
 
@@ -337,16 +379,12 @@ m32r_open (char *args, int from_tty)
   if (get_ack () == -1)
     error ("Cannot connect to SDI target\n");
 
-  buf[0] = SDI_OPEN;
-  if (send_data (buf, 1) == -1)
+  if (send_cmd (SDI_OPEN) == -1)
     error ("Cannot connect to SDI target\n");
 
   /* Get maximum number of ib breakpoints */
-  buf[0] = SDI_GET_ATTR;
-  buf[1] = SDI_ATTR_BRK;
-  send_data (buf, 2);
-  recv_data (buf, 1);
-  max_ib_breakpoints = buf[0];
+  send_one_arg_cmd (SDI_GET_ATTR, SDI_ATTR_BRK);
+  max_ib_breakpoints = recv_char_data ();
   if (remote_debug)
     printf_filtered ("Max IB Breakpoints = %d\n", max_ib_breakpoints);
 
@@ -355,11 +393,8 @@ m32r_open (char *args, int from_tty)
     bp_address[i] = 0xffffffff;
 
   /* Get maximum number of access breaks. */
-  buf[0] = SDI_GET_ATTR;
-  buf[1] = SDI_ATTR_ABRK;
-  send_data (buf, 2);
-  recv_data (buf, 1);
-  max_access_breaks = buf[0];
+  send_one_arg_cmd (SDI_GET_ATTR, SDI_ATTR_ABRK);
+  max_access_breaks = recv_char_data ();
   if (remote_debug)
     printf_filtered ("Max Access Breaks = %d\n", max_access_breaks);
 
@@ -370,9 +405,7 @@ m32r_open (char *args, int from_tty)
   check_mmu_status ();
 
   /* Get the name of chip on target board. */
-  buf[0] = SDI_GET_ATTR;
-  buf[1] = SDI_ATTR_NAME;
-  send_data (buf, 2);
+  send_one_arg_cmd (SDI_GET_ATTR, SDI_ATTR_NAME);
   recv_data (chip_name, 64);
 
   if (from_tty)
@@ -385,15 +418,12 @@ m32r_open (char *args, int from_tty)
 static void
 m32r_close (int quitting)
 {
-  unsigned char buf[1];
-
   if (remote_debug)
     fprintf_unfiltered (gdb_stdlog, "m32r_close(%d)\n", quitting);
 
   if (sdi_desc)
     {
-      buf[0] = SDI_CLOSE;
-      send_data (buf, 1);
+      send_cmd (SDI_CLOSE);
       serial_close (sdi_desc);
       sdi_desc = NULL;
     }
@@ -408,6 +438,7 @@ static void
 m32r_resume (ptid_t ptid, int step, enum target_signal sig)
 {
   unsigned long pc_addr, bp_addr, ab_addr;
+  int ib_breakpoints;
   unsigned char buf[13];
   int i;
 
@@ -451,206 +482,181 @@ m32r_resume (ptid_t ptid, int step, enum target_signal sig)
     }
 
   /* Set PC. */
-  buf[0] = SDI_WRITE_CPU_REG;
-  buf[1] = SDI_REG_BPC;
-  store_long_parameter (buf + 2, pc_addr);
-  send_data (buf, 6);
+  send_two_arg_cmd (SDI_WRITE_CPU_REG, SDI_REG_BPC, pc_addr);
 
   /* step mode. */
   step_mode = step;
   if (step)
     {
       /* Set PBP. */
-      buf[0] = SDI_WRITE_CPU_REG;
-      buf[1] = SDI_REG_PBP;
-      store_long_parameter (buf + 2, pc_addr | 1);
-      send_data (buf, 6);
+      send_two_arg_cmd (SDI_WRITE_CPU_REG, SDI_REG_PBP, pc_addr | 1);
     }
   else
     {
-      int ib_breakpoints;
+      /* Unset PBP. */
+      send_two_arg_cmd (SDI_WRITE_CPU_REG, SDI_REG_PBP, 0x00000000);
+    }
+
+  if (use_ib_breakpoints)
+    ib_breakpoints = max_ib_breakpoints;
+  else
+    ib_breakpoints = 0;
+
+  /* Set ib breakpoints. */
+  for (i = 0; i < ib_breakpoints; i++)
+    {
+      bp_addr = bp_address[i];
 
-      if (use_ib_breakpoints)
-       ib_breakpoints = max_ib_breakpoints;
+      if (bp_addr == 0xffffffff)
+       continue;
+
+      /* Set PBP. */
+      if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+       send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8000 + 4 * i, 4,
+                           0x00000006);
       else
-       ib_breakpoints = 0;
+       send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8000 + 4 * i, 4,
+                           0x06000000);
+
+      send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8080 + 4 * i, 4, bp_addr);
+    }
+
+  /* Set dbt breakpoints. */
+  for (i = ib_breakpoints; i < MAX_BREAKPOINTS; i++)
+    {
+      bp_addr = bp_address[i];
+
+      if (bp_addr == 0xffffffff)
+       continue;
+
+      if (!mmu_on)
+       bp_addr &= 0x7fffffff;
 
-      /* Set ib breakpoints. */
-      for (i = 0; i < ib_breakpoints; i++)
+      /* Write DBT instruction. */
+      buf[0] = SDI_WRITE_MEMORY;
+      store_long_parameter (buf + 1, bp_addr);
+      store_long_parameter (buf + 5, 4);
+      if ((bp_addr & 2) == 0 && bp_addr != (pc_addr & 0xfffffffc))
        {
-         bp_addr = bp_address[i];
-         if (bp_addr != 0xffffffff && bp_addr != pc_addr)
+         if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
            {
-             /* Set PBP. */
-             buf[0] = SDI_WRITE_MEMORY;
-             store_long_parameter (buf + 1, 0xffff8000 + 4 * i);
-             store_long_parameter (buf + 5, 4);
-             if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
-               {
-                 buf[9] = ib_bp_entry_enable[0];
-                 buf[10] = ib_bp_entry_enable[1];
-                 buf[11] = ib_bp_entry_enable[2];
-                 buf[12] = ib_bp_entry_enable[3];
-               }
-             else
-               {
-                 buf[9] = ib_bp_entry_enable[3];
-                 buf[10] = ib_bp_entry_enable[2];
-                 buf[11] = ib_bp_entry_enable[1];
-                 buf[12] = ib_bp_entry_enable[0];
-               }
-             send_data (buf, 13);
-
-             buf[0] = SDI_WRITE_MEMORY;
-             store_long_parameter (buf + 1, 0xffff8080 + 4 * i);
-             store_long_parameter (buf + 5, 4);
-             store_unsigned_integer (buf + 9, 4, bp_addr);
-             send_data (buf, 13);
+             buf[9] = dbt_bp_entry[0];
+             buf[10] = dbt_bp_entry[1];
+             buf[11] = dbt_bp_entry[2];
+             buf[12] = dbt_bp_entry[3];
+           }
+         else
+           {
+             buf[9] = dbt_bp_entry[3];
+             buf[10] = dbt_bp_entry[2];
+             buf[11] = dbt_bp_entry[1];
+             buf[12] = dbt_bp_entry[0];
            }
        }
-
-      /* Set dbt breakpoints. */
-      for (i = ib_breakpoints; i < MAX_BREAKPOINTS; i++)
+      else
        {
-         bp_addr = bp_address[i];
-         if (bp_addr != 0xffffffff && bp_addr != pc_addr)
+         if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
            {
-             if (!mmu_on)
-               bp_addr &= 0x7fffffff;
-
-             /* Write DBT instruction. */
-             buf[0] = SDI_WRITE_MEMORY;
-             if ((bp_addr & 2) == 0 && bp_addr != (pc_addr & 0xfffffffc))
+             if ((bp_addr & 2) == 0)
                {
-                 store_long_parameter (buf + 1, bp_addr);
-                 store_long_parameter (buf + 5, 4);
-                 if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
-                   {
-                     buf[9] = dbt_bp_entry[0];
-                     buf[10] = dbt_bp_entry[1];
-                     buf[11] = dbt_bp_entry[2];
-                     buf[12] = dbt_bp_entry[3];
-                   }
-                 else
-                   {
-                     buf[9] = dbt_bp_entry[3];
-                     buf[10] = dbt_bp_entry[2];
-                     buf[11] = dbt_bp_entry[1];
-                     buf[12] = dbt_bp_entry[0];
-                   }
-                 send_data (buf, 13);
+                 buf[9] = dbt_bp_entry[0];
+                 buf[10] = dbt_bp_entry[1];
+                 buf[11] = bp_data[i][2] & 0x7f;
+                 buf[12] = bp_data[i][3];
                }
              else
                {
-                 if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
-                   store_long_parameter (buf + 1, bp_addr);
-                 else if ((bp_addr & 2) == 0)
-                   store_long_parameter (buf + 1, bp_addr + 2);
-                 else
-                   store_long_parameter (buf + 1, bp_addr - 2);
-                 store_long_parameter (buf + 5, 2);
-                 if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
-                   {
-                     buf[9] = dbt_bp_entry[0];
-                     buf[10] = dbt_bp_entry[1];
-                   }
-                 else
-                   {
-                     buf[9] = dbt_bp_entry[1];
-                     buf[10] = dbt_bp_entry[0];
-                   }
-                 send_data (buf, 11);
+                 buf[9] = bp_data[i][0];
+                 buf[10] = bp_data[i][1];
+                 buf[11] = dbt_bp_entry[0];
+                 buf[12] = dbt_bp_entry[1];
                }
            }
-       }
-
-      /* Set access breaks. */
-      for (i = 0; i < max_access_breaks; i++)
-       {
-         ab_addr = ab_address[i];
-         if (ab_addr != 0x00000000)
+         else
            {
-             /* DBC register */
-             buf[0] = SDI_WRITE_MEMORY;
-             store_long_parameter (buf + 1, 0xffff8100 + 4 * i);
-             store_long_parameter (buf + 5, 4);
-             if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+             if ((bp_addr & 2) == 0)
                {
-                 buf[9] = 0x00;
-                 buf[10] = 0x00;
-                 buf[11] = 0x00;
-                 switch (ab_type[i])
-                   {
-                   case 0:     /* write watch */
-                     buf[12] = 0x86;
-                     break;
-                   case 1:     /* read watch */
-                     buf[12] = 0x46;
-                     break;
-                   case 2:     /* access watch */
-                     buf[12] = 0x06;
-                     break;
-                   }
+                 buf[9] = bp_data[i][0];
+                 buf[10] = bp_data[i][1] & 0x7f;
+                 buf[11] = dbt_bp_entry[1];
+                 buf[12] = dbt_bp_entry[0];
                }
              else
                {
-                 switch (ab_type[i])
-                   {
-                   case 0:     /* write watch */
-                     buf[9] = 0x86;
-                     break;
-                   case 1:     /* read watch */
-                     buf[9] = 0x46;
-                     break;
-                   case 2:     /* access watch */
-                     buf[9] = 0x06;
-                     break;
-                   }
-                 buf[10] = 0x00;
-                 buf[11] = 0x00;
-                 buf[12] = 0x00;
+                 buf[9] = dbt_bp_entry[1];
+                 buf[10] = dbt_bp_entry[0];
+                 buf[11] = bp_data[i][2];
+                 buf[12] = bp_data[i][3];
                }
-             send_data (buf, 13);
-
-             /* DBAH register */
-             buf[0] = SDI_WRITE_MEMORY;
-             store_long_parameter (buf + 1, 0xffff8180 + 4 * i);
-             store_long_parameter (buf + 5, 4);
-             store_unsigned_integer (buf + 9, 4, ab_addr);
-             send_data (buf, 13);
+           }
+       }
+      send_data (buf, 13);
+    }
 
-             /* DBAL register */
-             buf[0] = SDI_WRITE_MEMORY;
-             store_long_parameter (buf + 1, 0xffff8200 + 4 * i);
-             store_long_parameter (buf + 5, 4);
-             store_long_parameter (buf + 9, 0xffffffff);
-             send_data (buf, 13);
+  /* Set access breaks. */
+  for (i = 0; i < max_access_breaks; i++)
+    {
+      ab_addr = ab_address[i];
 
-             /* DBD register */
-             buf[0] = SDI_WRITE_MEMORY;
-             store_long_parameter (buf + 1, 0xffff8280 + 4 * i);
-             store_long_parameter (buf + 5, 4);
-             store_long_parameter (buf + 9, 0x00000000);
-             send_data (buf, 13);
+      if (ab_addr == 0x00000000)
+       continue;
 
-             /* DBDM register */
-             buf[0] = SDI_WRITE_MEMORY;
-             store_long_parameter (buf + 1, 0xffff8300 + 4 * i);
-             store_long_parameter (buf + 5, 4);
-             store_long_parameter (buf + 9, 0x00000000);
-             send_data (buf, 13);
+      /* DBC register */
+      if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+       {
+         switch (ab_type[i])
+           {
+           case 0:             /* write watch */
+             send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8100 + 4 * i, 4,
+                                 0x00000086);
+             break;
+           case 1:             /* read watch */
+             send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8100 + 4 * i, 4,
+                                 0x00000046);
+             break;
+           case 2:             /* access watch */
+             send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8100 + 4 * i, 4,
+                                 0x00000006);
+             break;
+           }
+       }
+      else
+       {
+         switch (ab_type[i])
+           {
+           case 0:             /* write watch */
+             send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8100 + 4 * i, 4,
+                                 0x86000000);
+             break;
+           case 1:             /* read watch */
+             send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8100 + 4 * i, 4,
+                                 0x46000000);
+             break;
+           case 2:             /* access watch */
+             send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8100 + 4 * i, 4,
+                                 0x06000000);
+             break;
            }
        }
 
-      /* Unset PBP. */
-      buf[0] = SDI_WRITE_CPU_REG;
-      buf[1] = SDI_REG_PBP;
-      store_long_parameter (buf + 2, 0x00000000);
-      send_data (buf, 6);
+      /* DBAH register */
+      send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8180 + 4 * i, 4, ab_addr);
+
+      /* DBAL register */
+      send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8200 + 4 * i, 4,
+                         0xffffffff);
+
+      /* DBD register */
+      send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8280 + 4 * i, 4,
+                         0x00000000);
+
+      /* DBDM register */
+      send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8300 + 4 * i, 4,
+                         0x00000000);
     }
 
-  buf[0] = SDI_EXEC_CPU;
-  send_data (buf, 1);
+  /* Resume program. */
+  send_cmd (SDI_EXEC_CPU);
 
   /* Without this, some commands which require an active target (such as kill)
      won't work.  This variable serves (at least) double duty as both the pid
@@ -679,6 +685,7 @@ m32r_wait (ptid_t ptid, struct target_waitstatus *status)
 {
   static RETSIGTYPE (*prev_sigint) ();
   unsigned long bp_addr, pc_addr;
+  int ib_breakpoints;
   long i;
   unsigned char buf[13];
   unsigned long val;
@@ -746,130 +753,106 @@ m32r_wait (ptid_t ptid, struct target_waitstatus *status)
       last_pc_addr = 0xffffffff;
     }
 
-  /* Breakpoints are inserted only for "next" command */
-  if (!step_mode)
-    {
-      int ib_breakpoints;
+  if (use_ib_breakpoints)
+    ib_breakpoints = max_ib_breakpoints;
+  else
+    ib_breakpoints = 0;
 
-      if (use_ib_breakpoints)
-       ib_breakpoints = max_ib_breakpoints;
-      else
-       ib_breakpoints = 0;
-
-      /* Set back pc by 2 if m32r is stopped with dbt. */
-      buf[0] = SDI_READ_CPU_REG;
-      buf[1] = SDI_REG_BPC;
-      send_data (buf, 2);
-      recv_data (&val, 4);
-      pc_addr = ntohl (val) - 2;
-      for (i = ib_breakpoints; i < MAX_BREAKPOINTS; i++)
+  /* Set back pc by 2 if m32r is stopped with dbt. */
+  last_pc_addr = 0xffffffff;
+  send_one_arg_cmd (SDI_READ_CPU_REG, SDI_REG_BPC);
+  pc_addr = recv_long_data () - 2;
+  for (i = ib_breakpoints; i < MAX_BREAKPOINTS; i++)
+    {
+      if (pc_addr == bp_address[i])
        {
-         if (pc_addr == bp_address[i])
+         send_two_arg_cmd (SDI_WRITE_CPU_REG, SDI_REG_BPC, pc_addr);
+
+         /* If there is a parallel instruction with +2 offset at pc
+            address, we have to take care of it later. */
+         if ((pc_addr & 0x2) != 0)
            {
-             buf[0] = SDI_WRITE_CPU_REG;
-             buf[1] = SDI_REG_BPC;
-             store_long_parameter (buf + 2, pc_addr);
-             send_data (buf, 6);
-
-             /* If there is a parallel instruction with +2 offset at pc
-                address, we have to take care of it later. */
-             if ((pc_addr & 0x2) != 0)
+             if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
                {
-                 if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+                 if ((bp_data[i][2] & 0x80) != 0)
                    {
-                     if ((bp_data[i][2] & 0x80) != 0)
-                       {
-                         last_pc_addr = pc_addr;
-                         last_pc_addr_data[0] = bp_data[i][2];
-                         last_pc_addr_data[1] = bp_data[i][3];
-                       }
+                     last_pc_addr = pc_addr;
+                     last_pc_addr_data[0] = bp_data[i][2];
+                     last_pc_addr_data[1] = bp_data[i][3];
                    }
-                 else
+               }
+             else
+               {
+                 if ((bp_data[i][1] & 0x80) != 0)
                    {
-                     if ((bp_data[i][1] & 0x80) != 0)
-                       {
-                         last_pc_addr = pc_addr;
-                         last_pc_addr_data[0] = bp_data[i][1];
-                         last_pc_addr_data[1] = bp_data[i][0];
-                       }
+                     last_pc_addr = pc_addr;
+                     last_pc_addr_data[0] = bp_data[i][1];
+                     last_pc_addr_data[1] = bp_data[i][0];
                    }
                }
-             break;
            }
+         break;
        }
+    }
 
-      /* Remove ib breakpoints. */
-      for (i = 0; i < ib_breakpoints; i++)
-       {
-         if (bp_address[i] != 0xffffffff)
-           {
-             buf[0] = SDI_WRITE_MEMORY;
-             store_long_parameter (buf + 1, 0xffff8000 + 4 * i);
-             store_long_parameter (buf + 5, 4);
-             buf[9] = ib_bp_entry_disable[0];
-             buf[10] = ib_bp_entry_disable[1];
-             buf[11] = ib_bp_entry_disable[2];
-             buf[12] = ib_bp_entry_disable[3];
-             send_data (buf, 13);
-           }
-       }
-      /* Remove dbt breakpoints. */
-      for (i = ib_breakpoints; i < MAX_BREAKPOINTS; i++)
+  /* Remove ib breakpoints. */
+  for (i = 0; i < ib_breakpoints; i++)
+    {
+      if (bp_address[i] != 0xffffffff)
+       send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8000 + 4 * i, 4,
+                           0x00000000);
+    }
+  /* Remove dbt breakpoints. */
+  for (i = ib_breakpoints; i < MAX_BREAKPOINTS; i++)
+    {
+      bp_addr = bp_address[i];
+      if (bp_addr != 0xffffffff)
        {
-         bp_addr = bp_address[i];
-         if (bp_addr != 0xffffffff)
-           {
-             if (!mmu_on)
-               bp_addr &= 0x7fffffff;
-             buf[0] = SDI_WRITE_MEMORY;
-             store_long_parameter (buf + 1, bp_addr & 0xfffffffc);
-             store_long_parameter (buf + 5, 4);
-             buf[9] = bp_data[i][0];
-             buf[10] = bp_data[i][1];
-             buf[11] = bp_data[i][2];
-             buf[12] = bp_data[i][3];
-             send_data (buf, 13);
-           }
+         if (!mmu_on)
+           bp_addr &= 0x7fffffff;
+         buf[0] = SDI_READ_MEMORY;
+         store_long_parameter (buf + 1, bp_addr & 0xfffffffc);
+         store_long_parameter (buf + 5, 4);
+         buf[9] = bp_data[i][0];
+         buf[10] = bp_data[i][1];
+         buf[11] = bp_data[i][2];
+         buf[12] = bp_data[i][3];
+         send_data (buf, 13);
        }
+    }
 
-      /* Remove access breaks. */
-      hit_watchpoint_addr = 0;
-      for (i = 0; i < max_access_breaks; i++)
+  /* Remove access breaks. */
+  hit_watchpoint_addr = 0;
+  for (i = 0; i < max_access_breaks; i++)
+    {
+      if (ab_address[i] != 0x00000000)
        {
-         if (ab_address[i] != 0x00000000)
+         buf[0] = SDI_READ_MEMORY;
+         store_long_parameter (buf + 1, 0xffff8100 + 4 * i);
+         store_long_parameter (buf + 5, 4);
+         serial_write (sdi_desc, buf, 9);
+         c = serial_readchar (sdi_desc, SDI_TIMEOUT);
+         if (c != '-' && recv_data (buf, 4) != -1)
            {
-             buf[0] = SDI_READ_MEMORY;
-             store_long_parameter (buf + 1, 0xffff8100 + 4 * i);
-             store_long_parameter (buf + 5, 4);
-             serial_write (sdi_desc, buf, 9);
-             c = serial_readchar (sdi_desc, SDI_TIMEOUT);
-             if (c != '-' && recv_data (buf, 4) != -1)
+             if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
                {
-                 if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
-                   {
-                     if ((buf[3] & 0x1) == 0x1)
-                       hit_watchpoint_addr = ab_address[i];
-                   }
-                 else
-                   {
-                     if ((buf[0] & 0x1) == 0x1)
-                       hit_watchpoint_addr = ab_address[i];
-                   }
+                 if ((buf[3] & 0x1) == 0x1)
+                   hit_watchpoint_addr = ab_address[i];
+               }
+             else
+               {
+                 if ((buf[0] & 0x1) == 0x1)
+                   hit_watchpoint_addr = ab_address[i];
                }
-
-             buf[0] = SDI_WRITE_MEMORY;
-             store_long_parameter (buf + 1, 0xffff8100 + 4 * i);
-             store_long_parameter (buf + 5, 4);
-             store_long_parameter (buf + 9, 0x00000000);
-             send_data (buf, 13);
            }
-       }
 
-      if (remote_debug)
-       fprintf_unfiltered (gdb_stdlog, "pc => 0x%lx\n", pc_addr);
+         send_three_arg_cmd (SDI_WRITE_MEMORY, 0xffff8100 + 4 * i, 4,
+                             0x00000000);
+       }
     }
-  else
-    last_pc_addr = 0xffffffff;
+
+  if (remote_debug)
+    fprintf_unfiltered (gdb_stdlog, "pc => 0x%lx\n", pc_addr);
 
   return inferior_ptid;
 }
@@ -933,7 +916,6 @@ static void
 m32r_fetch_register (int regno)
 {
   unsigned long val, val2, regid;
-  unsigned char buf[2];
 
   if (regno == -1)
     m32r_fetch_registers ();
@@ -942,19 +924,13 @@ m32r_fetch_register (int regno)
       char buffer[MAX_REGISTER_SIZE];
 
       regid = get_reg_id (regno);
-      buf[0] = SDI_READ_CPU_REG;
-      buf[1] = regid;
-      send_data (buf, 2);
-      recv_data (&val, 4);
-      val = ntohl (val);
+      send_one_arg_cmd (SDI_READ_CPU_REG, regid);
+      val = recv_long_data ();
 
       if (regid == SDI_REG_PSW)
        {
-         buf[0] = SDI_READ_CPU_REG;
-         buf[1] = SDI_REG_BBPSW;
-         send_data (buf, 2);
-         recv_data (&val2, 4);
-         val2 = ntohl (val2);
+         send_one_arg_cmd (SDI_READ_CPU_REG, SDI_REG_BBPSW);
+         val2 = recv_long_data ();
          val = ((0x00c1 & val2) << 8) | ((0xc100 & val) >> 8);
        }
 
@@ -992,7 +968,6 @@ m32r_store_register (int regno)
 {
   int regid;
   ULONGEST regval, tmp;
-  unsigned char buf[6];
 
   if (regno == -1)
     m32r_store_registers ();
@@ -1005,36 +980,21 @@ m32r_store_register (int regno)
        {
          unsigned long psw, bbpsw;
 
-         buf[0] = SDI_READ_CPU_REG;
-         buf[1] = SDI_REG_PSW;
-         send_data (buf, 2);
-         recv_data (&psw, 4);
-         psw = ntohl (psw);
+         send_one_arg_cmd (SDI_READ_CPU_REG, SDI_REG_PSW);
+         psw = recv_long_data ();
 
-         buf[0] = SDI_READ_CPU_REG;
-         buf[1] = SDI_REG_BBPSW;
-         send_data (buf, 2);
-         recv_data (&bbpsw, 4);
-         bbpsw = ntohl (bbpsw);
+         send_one_arg_cmd (SDI_READ_CPU_REG, SDI_REG_BBPSW);
+         bbpsw = recv_long_data ();
 
          tmp = (0x00c1 & psw) | ((0x00c1 & regval) << 8);
-         buf[0] = SDI_WRITE_CPU_REG;
-         buf[1] = SDI_REG_PSW;
-         store_long_parameter (buf + 2, tmp);
-         send_data (buf, 6);
+         send_two_arg_cmd (SDI_WRITE_CPU_REG, SDI_REG_PSW, tmp);
 
          tmp = (0x0030 & bbpsw) | ((0xc100 & regval) >> 8);
-         buf[0] = SDI_WRITE_CPU_REG;
-         buf[1] = SDI_REG_BBPSW;
-         store_long_parameter (buf + 2, tmp);
-         send_data (buf, 6);
+         send_two_arg_cmd (SDI_WRITE_CPU_REG, SDI_REG_BBPSW, tmp);
        }
       else
        {
-         buf[0] = SDI_WRITE_CPU_REG;
-         buf[1] = regid;
-         store_long_parameter (buf + 2, regval);
-         send_data (buf, 6);
+         send_two_arg_cmd (SDI_WRITE_CPU_REG, regid, regval);
        }
 
       if (remote_debug)
@@ -1422,13 +1382,10 @@ m32r_load (char *args, int from_tty)
 static void
 m32r_stop (void)
 {
-  unsigned char buf[1];
-
   if (remote_debug)
     fprintf_unfiltered (gdb_stdlog, "m32r_stop()\n");
 
-  buf[0] = SDI_STOP_CPU;
-  send_data (buf, 1);
+  send_cmd (SDI_STOP_CPU);
 
   return;
 }
@@ -1509,13 +1466,10 @@ m32r_stopped_by_watchpoint (void)
 static void
 sdireset_command (char *args, int from_tty)
 {
-  unsigned char buf[1];
-
   if (remote_debug)
     fprintf_unfiltered (gdb_stdlog, "m32r_sdireset()\n");
 
-  buf[0] = SDI_OPEN;
-  send_data (buf, 1);
+  send_cmd (SDI_OPEN);
 
   inferior_ptid = null_ptid;
 }
@@ -1533,8 +1487,7 @@ sdistatus_command (char *args, int from_tty)
   if (!sdi_desc)
     return;
 
-  buf[0] = SDI_STATUS;
-  send_data (buf, 1);
+  send_cmd (SDI_STATUS);
   for (i = 0; i < 4096; i++)
     {
       c = serial_readchar (sdi_desc, SDI_TIMEOUT);
This page took 0.03188 seconds and 4 git commands to generate.