-/* Remote debugging interface for MONITOR boot monitor, for GDB.
- Copyright 1990, 1991, 1992 Free Software Foundation, Inc.
- Contributed by Cygnus Support. Written by Rob Savoye for Cygnus.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-
-/* This file was derived from remote-eb.c, which did a similar job, but for
- an AMD-29K running EBMON. That file was in turn derived from remote.c
- as mentioned in the following comment (left in for comic relief):
-
- "This is like remote.c but is for an esoteric situation--
- having an a29k board in a PC hooked up to a unix machine with
- a serial line, and running ctty com1 on the PC, through which
- the unix machine can run ebmon. Not to mention that the PC
- has PC/NFS, so it can access the same executables that gdb can,
- over the net in real time."
-
- In reality, this module talks to a debug monitor called 'MONITOR', which
- We communicate with MONITOR via either a direct serial line, or a TCP
- (or possibly TELNET) stream to a terminal multiplexor,
- which in turn talks to the target board.
-
- This is based on remote-st2000.c. I left in the above note here for histerical
- reasons.
-*/
-
-#include "defs.h"
-#include "gdbcore.h"
-#include "target.h"
-#include "wait.h"
-#include <varargs.h>
-#include <signal.h>
-#include <string.h>
-#include <sys/types.h>
-#include "command.h"
-#include "serial.h"
-#include "monitor.h"
-
-#ifdef HAVE_TERMIO
-# define TERMINAL struct termios
-#else
-# define TERMINAL struct sgttyb
-#endif
-
-struct monitor_ops *current_monitor;
-extern struct target_ops rom68k_ops; /* Forward declaration */
-extern struct target_ops mon68_ops; /* Forward declaration */
-extern struct target_ops bug_ops; /* Forward declaration */
-extern struct monitor_ops rom68k_cmds; /* Forward declaration */
-extern struct monitor_ops mon68_cmds; /* Forward declaration */
-extern struct monitor_ops bug_cmds; /* Forward declaration */
-extern struct cmd_list_element *setlist;
-extern struct cmd_list_element *unsetlist;
-struct cmd_list_element *showlist;
-
-static void monitor_close();
-static void monitor_fetch_register();
-static void monitor_store_register();
-static int kiodebug; /* flag set by "set remotedebug" */
-static int hashmark; /* flag set by "set hash" */
-
-#define LOG_FILE "monitor.log"
-#if defined (LOG_FILE)
-FILE *log_file;
-#endif
-
-static int timeout = 24;
-
-/* Descriptor for I/O to remote machine. Initialize it to -1 so that
- monitor_open knows that we don't have a file open when the program
- starts. */
-static serial_t monitor_desc;
-
-/* Send data to monitor. Works just like printf. */
-
-static void
-printf_monitor(va_alist)
- va_dcl
-{
- va_list args;
- char *pattern;
- char buf[200];
- int i;
-
- va_start(args);
-
- pattern = va_arg(args, char *);
-
- vsprintf(buf, pattern, args);
-
- if (SERIAL_WRITE(monitor_desc, buf, strlen(buf)))
- fprintf(stderr, "SERIAL_WRITE failed: %s\n", safe_strerror(errno));
-}
-
-/* Read a character from the remote system, doing all the fancy
- timeout stuff. */
-static int
-readchar(timeout)
- int timeout;
-{
- int c;
-
- c = SERIAL_READCHAR(monitor_desc, timeout);
-
- if (kiodebug)
- putchar(c & 0x7f);
-
-#ifdef LOG_FILE
- if (isascii (c))
- putc(c & 0x7f, log_file);
-#endif
-
- if (c >= 0)
- return c & 0x7f;
-
- if (c == SERIAL_TIMEOUT)
- {
- if (timeout == 0)
- return c; /* Polls shouldn't generate timeout errors */
-
- error("Timeout reading from remote system.");
- }
-
- perror_with_name("remote-monitor");
-}
-
-/* Scan input from the remote system, until STRING is found. If DISCARD is
- non-zero, then discard non-matching input, else print it out.
- Let the user break out immediately. */
-static void
-expect(string, discard)
- char *string;
- int discard;
-{
- char *p = string;
- int c;
-
- if (kiodebug)
- printf ("Expecting \"%s\"\n", string);
-
- immediate_quit = 1;
- while (1)
- {
- c = readchar(timeout);
- if (!isascii (c))
- continue;
- if (c == *p++)
- {
- if (*p == '\0')
- {
- immediate_quit = 0;
- if (kiodebug)
- printf ("\nMatched\n");
- return;
- }
- }
- else
- {
- if (!discard)
- {
- fwrite(string, 1, (p - 1) - string, stdout);
- putchar((char)c);
- fflush(stdout);
- }
- p = string;
- }
- }
-}
-
-/* Keep discarding input until we see the MONITOR prompt.
-
- The convention for dealing with the prompt is that you
- o give your command
- o *then* wait for the prompt.
-
- Thus the last thing that a procedure does with the serial line
- will be an expect_prompt(). Exception: monitor_resume does not
- wait for the prompt, because the terminal is being handed over
- to the inferior. However, the next thing which happens after that
- is a monitor_wait which does wait for the prompt.
- Note that this includes abnormal exit, e.g. error(). This is
- necessary to prevent getting into states from which we can't
- recover. */
-static void
-expect_prompt(discard)
- int discard;
-{
-#if defined (LOG_FILE)
- /* This is a convenient place to do this. The idea is to do it often
- enough that we never lose much data if we terminate abnormally. */
- fflush(log_file);
-#endif
- expect (PROMPT, discard);
-}
-
-/* Get a hex digit from the remote system & return its value.
- If ignore_space is nonzero, ignore spaces (not newline, tab, etc). */
-static int
-get_hex_digit(ignore_space)
- int ignore_space;
-{
- int ch;
- while (1)
- {
- ch = readchar(timeout);
- if (ch >= '0' && ch <= '9')
- return ch - '0';
- else if (ch >= 'A' && ch <= 'F')
- return ch - 'A' + 10;
- else if (ch >= 'a' && ch <= 'f')
- return ch - 'a' + 10;
- else if (ch == ' ' && ignore_space)
- ;
- else
- {
- expect_prompt(1);
- error("Invalid hex digit from remote system.");
- }
- }
-}
-
-/* Get a byte from monitor and put it in *BYT. Accept any number
- leading spaces. */
-static void
-get_hex_byte (byt)
- char *byt;
-{
- int val;
-
- val = get_hex_digit (1) << 4;
- val |= get_hex_digit (0);
- *byt = val;
-}
-
-/* Get N 32-bit words from remote, each preceded by a space,
- and put them in registers starting at REGNO. */
-static void
-get_hex_regs (n, regno)
- int n;
- int regno;
-{
- long val;
- int i;
-
- for (i = 0; i < n; i++)
- {
- int j;
-
- val = 0;
- for (j = 0; j < 8; j++)
- val = (val << 4) + get_hex_digit (j == 0);
- supply_register (regno++, (char *) &val);
- }
-}
-
-/* This is called not only when we first attach, but also when the
- user types "run" after having attached. */
-static void
-monitor_create_inferior (execfile, args, env)
- char *execfile;
- char *args;
- char **env;
-{
- int entry_pt;
-
- if (args && *args)
- error("Can't pass arguments to remote MONITOR process");
-
- if (execfile == 0 || exec_bfd == 0)
- error("No exec file specified");
-
- entry_pt = (int) bfd_get_start_address (exec_bfd);
-
-#ifdef CREATE_INFERIOR_HOOK
- CREATE_INFERIOR_HOOK (0); /* No process-ID */
-#endif
-#ifdef LOG_FILE
- fputs ("\nIn Create_inferior()", log_file);
-#endif
-
-/* The "process" (board) is already stopped awaiting our commands, and
- the program is already downloaded. We just set its PC and go. */
-
- clear_proceed_status ();
-
- /* Tell wait_for_inferior that we've started a new process. */
- init_wait_for_inferior ();
-
- /* Set up the "saved terminal modes" of the inferior
- based on what modes we are starting it with. */
- target_terminal_init ();
-
- /* Install inferior's terminal modes. */
- target_terminal_inferior ();
-
- /* insert_step_breakpoint (); FIXME, do we need this? */
- proceed ((CORE_ADDR)entry_pt, -1, 0); /* Let 'er rip... */
-}
-
-/* Open a connection to a remote debugger.
- NAME is the filename used for communication. */
-
-static int baudrate = 9600;
-static char dev_name[100];
-
-static void
-general_open(args, name, from_tty)
- char *args;
- char *name;
- int from_tty;
-{
- if (args == NULL)
- error ("Use `target %s DEVICE-NAME' to use a serial port, or \n\
-`target %s HOST-NAME:PORT-NUMBER' to use a network connection.", name, name);
-
- target_preopen(from_tty);
-
- monitor_close(0);
-
- monitor_desc = SERIAL_OPEN(dev_name);
-
- if (!monitor_desc)
- perror_with_name(dev_name);
-
- /* The baud rate was specified when GDB was started. */
- if (baud_rate)
- {
- int rate;
-
- if (sscanf (baud_rate, "%d", &rate) == 1)
- if (SERIAL_SETBAUDRATE (monitor_desc, rate))
- {
- SERIAL_CLOSE (monitor_desc);
- perror_with_name (name);
- }
- }
-
- SERIAL_RAW(monitor_desc);
-
-#if defined (LOG_FILE)
- log_file = fopen (LOG_FILE, "w");
- if (log_file == NULL)
- perror_with_name (LOG_FILE);
-#endif
-
- /* Hello? Are you there? */
- printf_monitor("\r"); /* CR wakes up monitor */
-
- expect_prompt(1);
-
- if (from_tty)
- printf("Remote %s connected to %s\n", target_shortname,
- dev_name);
-}
-
-static void
-rom68k_open(args, from_tty)
- char *args;
- int from_tty;
-{
- push_target(&rom68k_ops);
- push_monitor (&rom68k_cmds);
-
- general_open (args, "rom68k", from_tty);
-}
-
-static void
-mon68_open(args, from_tty)
- char *args;
- int from_tty;
-{
- push_target(&mon68_ops);
- push_monitor (&mon68_cmds);
-
- general_open (args, "mon68", from_tty);
-}
-
-static void
-bug_open(args, from_tty)
- char *args;
- int from_tty;
-{
- push_target(&bug_ops);
- push_monitor (&bug_cmds);
-
- general_open (args, "bug", from_tty);
-}
-
-/*
- * _close -- Close out all files and local state before this target loses control.
- */
-
-static void
-monitor_close (quitting)
- int quitting;
-{
- SERIAL_CLOSE(monitor_desc);
-
-#if defined (LOG_FILE)
- if (log_file) {
- if (ferror(log_file))
- fprintf(stderr, "Error writing log file.\n");
- if (fclose(log_file) != 0)
- fprintf(stderr, "Error closing log file.\n");
- }
-#endif
-}
-
-/* Terminate the open connection to the remote debugger.
- Use this when you want to detach and do something else
- with your gdb. */
-static void
-monitor_detach (from_tty)
- int from_tty;
-{
- pop_target(); /* calls monitor_close to do the real work */
- if (from_tty)
- printf ("Ending remote %s debugging\n", target_shortname);
-}
-
-/*
- * _resume -- Tell the remote machine to resume.
- */
-static void
-monitor_resume (step, sig)
- int step, sig;
-{
-#ifdef LOG_FILE
- fprintf (log_file, "\nIn Resume (step=%d, sig=%d)\n", step, sig);
-#endif
-
- if (step)
- {
- printf_monitor (STEP_CMD);
- /* wait for the echo. */
- expect (STEP_CMD, 1);
- }
- else
- {
- printf_monitor (GO_CMD);
- /* swallow the echo. */
- expect (GO_CMD, 1);
- }
-}
-
-/*
- * _wait -- Wait until the remote machine stops, then return,
- * storing status in status just as `wait' would.
- */
-
-static int
-monitor_wait (status)
- WAITTYPE *status;
-{
- int old_timeout = timeout;
-#ifdef LOG_FILE
- fputs ("\nIn wait ()", log_file);
-#endif
-
- WSETEXIT ((*status), 0);
-
- timeout = 0; /* Don't time out -- user program is running. */
-
- expect_prompt(0); /* Wait for prompt, outputting extraneous text */
-
- WSETSTOP ((*status), SIGTRAP);
-
- timeout = old_timeout;
-
- return 0;
-}
-
-/* Return the name of register number regno in the form input and output by
- monitor. Currently, register_names just happens to contain exactly what
- monitor wants. Lets take advantage of that just as long as possible! */
-
-static char *
-get_reg_name (regno)
- int regno;
-{
- static char buf[50];
- const char *p;
- char *b;
-
- b = buf;
-
- if (regno < 0)
- return ("");
- for (p = reg_names[regno]; *p; p++)
- *b++ = toupper(*p);
- *b = '\000';
-
- return buf;
-}
-
-/* read the remote registers into the block regs. */
-
-static void
-monitor_fetch_registers ()
-{
- int regno;
-
- /* yeah yeah, i know this is horribly inefficient. but it isn't done
- very often... i'll clean it up later. */
-
- for (regno = 0; regno <= PC_REGNUM; regno++)
- monitor_fetch_register(regno);
-}
-
-/* Fetch register REGNO, or all registers if REGNO is -1.
- Returns errno value. */
-static void
-monitor_fetch_register (regno)
- int regno;
-{
- int val, j;
-
-#ifdef LOG_FILE
- fprintf (log_file, "\nIn Fetch Register (reg=%s)\n", get_reg_name (regno));
- fflush (log_file);
-#endif
-
- if (regno < 0)
- {
- monitor_fetch_registers ();
- }
- else
- {
- char *name = get_reg_name (regno);
- printf_monitor (GET_REG, name);
- expect (name, 1);
- expect (REG_DELIM, 1);
- if (strcasecmp (name, "SR") == 0)
- {
- val = 0;
- for (j = 0; j < 4; j++)
- val = (val << 4) + get_hex_digit (j == 0);
- supply_register (regno, (char *) &val);
- }
- else
- {
- get_hex_regs (1, regno);
- }
- if (CMD_END)
- {
- expect (CMD_DELIM);
- printf_monitor (CMD_END);
- }
- expect_prompt (1);
- }
- return;
-}
-
-/* Store the remote registers from the contents of the block REGS. */
-
-static void
-monitor_store_registers ()
-{
- int regno;
-
- for (regno = 0; regno <= PC_REGNUM; regno++)
- monitor_store_register(regno);
-
- registers_changed ();
-}
-
-/* Store register REGNO, or all if REGNO == 0.
- return errno value. */
-static void
-monitor_store_register (regno)
- int regno;
-{
-#ifdef LOG_FILE
- fprintf (log_file, "\nIn Store_register (regno=%d)\n", regno);
-#endif
- if (regno == -1)
- monitor_store_registers ();
- else
- {
- if (kiodebug)
- printf ("Setting register %s to 0x%x\n", get_reg_name (regno), read_register (regno));
-
- printf_monitor (SET_REG, get_reg_name (regno),
- read_register (regno));
-
- expect_prompt (1);
- }
-}
-
-/* Get ready to modify the registers array. On machines which store
- individual registers, this doesn't need to do anything. On machines
- which store all the registers in one fell swoop, this makes sure
- that registers contains all the registers from the program being
- debugged. */
-
-static void
-monitor_prepare_to_store ()
-{
- /* Do nothing, since we can store individual regs */
-}
-
-static void
-monitor_files_info ()
-{
- printf ("\tAttached to %s at %d baud.\n",
- dev_name, baudrate);
-}
-
-/* Copy LEN bytes of data from debugger memory at MYADDR
- to inferior's memory at MEMADDR. Returns length moved. */
-static int
-monitor_write_inferior_memory (memaddr, myaddr, len)
- CORE_ADDR memaddr;
- unsigned char *myaddr;
- int len;
-{
- int i;
- char buf[10];
-
-#ifdef LOG_FILE
- fprintf (log_file, "\nIn Write_inferior_memory (memaddr=%x, len=%d)\n", memaddr, len);
-#endif
- for (i = 0; i < len; i++)
- {
- printf_monitor (MEM_SET_CMD, memaddr + i);
- expect (sprintf (buf, MEM_PROMPT, memaddr + i), 1);
- expect (CMD_DELIM);
- printf_monitor ("%x", myaddr[i]);
- if (kiodebug)
- printf ("\nSet 0x%x to 0x%x\n", memaddr + i, myaddr[i]);
- if (CMD_END)
- {
-/*** expect (sprintf (buf, MEM_PROMPT, memaddr + i +1), 1);
- expect (CMD_DELIM); ***/
- printf_monitor (CMD_END);
- }
- expect_prompt (1);
- }
- return len;
-}
-
-/* Read LEN bytes from inferior memory at MEMADDR. Put the result
- at debugger address MYADDR. Returns length moved. */
-static int
-monitor_read_inferior_memory(memaddr, myaddr, len)
- CORE_ADDR memaddr;
- char *myaddr;
- int len;
-{
- int i, j;
- char buf[20];
-
- /* Number of bytes read so far. */
- int count;
-
- /* Starting address of this pass. */
- unsigned long startaddr;
-
- /* Number of bytes to read in this pass. */
- int len_this_pass;
-
-#ifdef LOG_FILE
- fprintf (log_file, "\nIn Read_inferior_memory (memaddr=%x, len=%d)\n", memaddr, len);
-#endif
-
- /* Note that this code works correctly if startaddr is just less
- than UINT_MAX (well, really CORE_ADDR_MAX if there was such a
- thing). That is, something like
- monitor_read_bytes (CORE_ADDR_MAX - 4, foo, 4)
- works--it never adds len To memaddr and gets 0. */
- /* However, something like
- monitor_read_bytes (CORE_ADDR_MAX - 3, foo, 4)
- doesn't need to work. Detect it and give up if there's an attempt
- to do that. */
- if (((memaddr - 1) + len) < memaddr) {
- errno = EIO;
- return 0;
- }
-
- startaddr = memaddr;
- count = 0;
- while (count < len)
- {
- len_this_pass = 16;
- if ((startaddr % 16) != 0)
- len_this_pass -= startaddr % 16;
- if (len_this_pass > (len - count))
- len_this_pass = (len - count);
- if (kiodebug)
- printf ("\nDisplay %d bytes at %x\n", len_this_pass, startaddr);
-
- for (i = 0; i < len_this_pass; i++)
- {
- printf_monitor (MEM_DIS_CMD, startaddr);
- expect (sprintf(buf, MEM_PROMPT, startaddr), 1);
- get_hex_byte (&myaddr[count++]);
- if (kiodebug)
- printf ("\nRead a 0x%x from 0x%x\n", myaddr[count-1], startaddr);
- if (CMD_END)
- {
- expect (CMD_DELIM);
- printf_monitor (CMD_END);
- }
- expect_prompt (1);
- startaddr += 1;
- }
- }
- return len;
-}
-
-/* FIXME-someday! merge these two. */
-static int
-monitor_xfer_inferior_memory (memaddr, myaddr, len, write, target)
- CORE_ADDR memaddr;
- char *myaddr;
- int len;
- int write;
- struct target_ops *target; /* ignored */
-{
- if (write)
- return monitor_write_inferior_memory (memaddr, myaddr, len);
- else
- return monitor_read_inferior_memory (memaddr, myaddr, len);
-}
-
-static void
-monitor_kill (args, from_tty)
- char *args;
- int from_tty;
-{
- return; /* ignore attempts to kill target system */
-}
-
-/* Clean up when a program exits.
- The program actually lives on in the remote processor's RAM, and may be
- run again without a download. Don't leave it full of breakpoint
- instructions. */
-
-static void
-monitor_mourn_inferior ()
-{
- remove_breakpoints ();
- generic_mourn_inferior (); /* Do all the proper things now */
-}
-
-#define MAX_MONITOR_BREAKPOINTS 16
-
-extern int memory_breakpoint_size;
-static CORE_ADDR breakaddr[MAX_MONITOR_BREAKPOINTS] = {0};
-
-static int
-monitor_insert_breakpoint (addr, shadow)
- CORE_ADDR addr;
- char *shadow;
-{
- int i;
-
-#ifdef LOG_FILE
- fprintf (log_file, "\nIn Insert_breakpoint (addr=%x)\n", addr);
-#endif
- for (i = 0; i <= MAX_MONITOR_BREAKPOINTS; i++)
- if (breakaddr[i] == 0)
- {
- breakaddr[i] = addr;
- if (kiodebug)
- printf ("Breakpoint at %x\n", addr);
- monitor_read_inferior_memory(addr, shadow, memory_breakpoint_size);
- printf_monitor(SET_BREAK_CMD, addr);
- expect_prompt(1);
- return 0;
- }
-
- fprintf(stderr, "Too many breakpoints (> 16) for monitor\n");
- return 1;
-}
-
-/*
- * _remove_breakpoint -- Tell the monitor to remove a breakpoint
- */
-static int
-monitor_remove_breakpoint (addr, shadow)
- CORE_ADDR addr;
- char *shadow;
-{
- int i;
-
-#ifdef LOG_FILE
- fprintf (log_file, "\nIn Remove_breakpoint (addr=%x)\n", addr);
-#endif
- for (i = 0; i < MAX_MONITOR_BREAKPOINTS; i++)
- if (breakaddr[i] == addr)
- {
- breakaddr[i] = 0;
- /* some monitors remove breakpoints based on the address */
- if (strcasecmp (target_shortname, "bug") == 0)
- printf_monitor(CLR_BREAK_CMD, addr);
- else
- printf_monitor(CLR_BREAK_CMD, i);
- expect_prompt(1);
- return 0;
- }
-
- fprintf(stderr, "Can't find breakpoint associated with 0x%x\n", addr);
- return 1;
-}
-
-/* Load a file. This is usually an srecord, which is ascii. No
- protocol, just sent line by line. */
-
-#define DOWNLOAD_LINE_SIZE 100
-static void
-monitor_load (arg)
- char *arg;
-{
- FILE *download;
- char buf[DOWNLOAD_LINE_SIZE];
- int i, bytes_read;
-
- if (kiodebug)
- printf ("Loading %s to monitor\n", arg);
-
- download = fopen (arg, "r");
- if (download == NULL)
- {
- error (sprintf (buf, "%s Does not exist", arg));
- return;
- }
-
- printf_monitor (LOAD_CMD);
-/* expect ("Waiting for S-records from host... ", 1); */
-
- while (!feof (download))
- {
- bytes_read = fread (buf, sizeof (char), DOWNLOAD_LINE_SIZE, download);
- if (hashmark)
- {
- putchar ('.');
- fflush (stdout);
- }
-
- if (SERIAL_WRITE(monitor_desc, buf, bytes_read)) {
- fprintf(stderr, "SERIAL_WRITE failed: (while downloading) %s\n", safe_strerror(errno));
- break;
- }
- i = 0;
- while (i++ <=200000) {} ; /* Ugly HACK, probably needs flow control */
- if (bytes_read < DOWNLOAD_LINE_SIZE)
- {
- if (!feof (download))
- error ("Only read %d bytes\n", bytes_read);
- break;
- }
- }
-
- if (hashmark)
- {
- putchar ('\n');
- }
- if (!feof (download))
- error ("Never got EOF while downloading");
- fclose (download);
-}
-
-/* Put a command string, in args, out to MONITOR. Output from MONITOR is placed
- on the users terminal until the prompt is seen. */
-
-static void
-monitor_command (args, fromtty)
- char *args;
- int fromtty;
-{
-#ifdef LOG_FILE
- fprintf (log_file, "\nIn command (args=%s)\n", args);
-#endif
- if (monitor_desc < 0)
- error("monitor target not open.");
-
- if (!args)
- error("Missing command.");
-
- printf_monitor("%s\r", args);
- expect_prompt(0);
-}
-
-#if 0
-
-/* Connect the user directly to MONITOR. This command acts just like the
- 'cu' or 'tip' command. Use <CR>~. or <CR>~^D to break out. */
-
-static struct ttystate ttystate;
-
-static void
-cleanup_tty()
-{ printf("\r\n[Exiting connect mode]\r\n");
- /*SERIAL_RESTORE(0, &ttystate);*/
-}
-
-static void
-connect_command (args, fromtty)
- char *args;
- int fromtty;
-{
- fd_set readfds;
- int numfds;
- int c;
- char cur_esc = 0;
-
- dont_repeat();
-
- if (monitor_desc < 0)
- error("monitor target not open.");
-
- if (args)
- fprintf("This command takes no args. They have been ignored.\n");
-
- printf("[Entering connect mode. Use ~. or ~^D to escape]\n");
-
- serial_raw(0, &ttystate);
-
- make_cleanup(cleanup_tty, 0);
-
- FD_ZERO(&readfds);
-
- while (1)
- {
- do
- {
- FD_SET(0, &readfds);
- FD_SET(monitor_desc, &readfds);
- numfds = select(sizeof(readfds)*8, &readfds, 0, 0, 0);
- }
- while (numfds == 0);
-
- if (numfds < 0)
- perror_with_name("select");
-
- if (FD_ISSET(0, &readfds))
- { /* tty input, send to monitor */
- c = getchar();
- if (c < 0)
- perror_with_name("connect");
-
- printf_monitor("%c", c);
- switch (cur_esc)
- {
- case 0:
- if (c == '\r')
- cur_esc = c;
- break;
- case '\r':
- if (c == '~')
- cur_esc = c;
- else
- cur_esc = 0;
- break;
- case '~':
- if (c == '.' || c == '\004')
- return;
- else
- cur_esc = 0;
- }
- }
-
- if (FD_ISSET(monitor_desc, &readfds))
- {
- while (1)
- {
- c = readchar(0);
- if (c < 0)
- break;
- putchar(c);
- }
- fflush(stdout);
- }
- }
-}
-#endif
-
-/*
- * Define the monitor command strings. Since these are passed directly
- * through to a printf style function, we need can include formatting
- * strings. We also need a CR or LF on the end.
- */
-struct monitor_ops rom68k_cmds = {
- "go \r", /* execute or usually GO command */
- "go \r", /* continue command */
- "st \r", /* single step */
- "db %x\r", /* set a breakpoint */
- "cb %x\r", /* clear a breakpoint */
- "pm %x\r", /* set memory to a value */
- "pm %x\r", /* display memory */
- "-%08X ", /* prompt memory commands use */
- "pr %s %x\r", /* set a register */
- ": ", /* delimiter between registers */
- "pr %s\r", /* read a register */
- "dc \r", /* download command */
- "ROM68K :->", /* monitor command prompt */
- "=", /* end-of-command delimitor */
- ".\r" /* optional command terminator */
-};
-
-struct monitor_ops bug_cmds = {
- "go \r", /* execute or usually GO command */
- "go \r", /* continue command */
- "gn \r", /* single step */
- "br %x\r", /* set a breakpoint */
- "nobr %x\r", /* clear a breakpoint */
- "mm %x\r", /* set memory to a value */
- "mm %x\r", /* display memory */
- "%08X", /* prompt memory commands use */
- "rs %s %x\r", /* set a register */
- "=", /* delimiter between registers */
- "rm %s\r", /* read a register */
- "lo 0\r", /* download command */
- "Bug>", /* monitor command prompt */
- "? ", /* end-of-command delimitor */
- ".\r" /* optional command terminator */
-};
-
-/* Define the target subroutine names */
-struct monitor_ops mon68_cmds = {
- "", /* execute or usually GO command */
- "", /* continue command */
- "", /* single step */
- "", /* set a breakpoint */
- "", /* clear a breakpoint */
- "", /* set memory to a value */
- "", /* display memory */
- "", /* set a register */
- "", /* delimiter between registers */
- "", /* read a register */
- "", /* download command */
- ">", /* monitor command prompt */
- "", /* end-of-command delimitor */
- "" /* optional command terminator */
-};
-
-struct target_ops rom68k_ops = {
- "rom68k",
- "Integrated System's ROM68K remote debug monitor",
- "Use a remote computer running the ROM68K debug monitor.\n\
-Specify the serial device it is connected to (e.g. /dev/ttya).",
- rom68k_open,
- monitor_close,
- 0,
- monitor_detach,
- monitor_resume,
- monitor_wait,
- monitor_fetch_register,
- monitor_store_register,
- monitor_prepare_to_store,
- monitor_xfer_inferior_memory,
- monitor_files_info,
- monitor_insert_breakpoint,
- monitor_remove_breakpoint, /* Breakpoints */
- 0,
- 0,
- 0,
- 0,
- 0, /* Terminal handling */
- monitor_kill,
- monitor_load, /* load */
- 0, /* lookup_symbol */
- monitor_create_inferior,
- monitor_mourn_inferior,
- 0, /* can_run */
- 0, /* notice_signals */
- process_stratum,
- 0, /* next */
- 1,
- 1,
- 1,
- 1,
- 1, /* all mem, mem, stack, regs, exec */
- 0,
- 0, /* Section pointers */
- OPS_MAGIC, /* Always the last thing */
-};
-
-struct target_ops bug_ops = {
- "bug",
- "Motorola's BUG remote serial debug monitor",
- "Use a remote computer running Motorola's BUG debug monitor.\n\
-Specify the serial device it is connected to (e.g. /dev/ttya).",
- bug_open,
- monitor_close,
- 0,
- monitor_detach,
- monitor_resume,
- monitor_wait,
- monitor_fetch_register,
- monitor_store_register,
- monitor_prepare_to_store,
- monitor_xfer_inferior_memory,
- monitor_files_info,
- monitor_insert_breakpoint,
- monitor_remove_breakpoint, /* Breakpoints */
- 0,
- 0,
- 0,
- 0,
- 0, /* Terminal handling */
- monitor_kill,
- monitor_load, /* load */
- 0, /* lookup_symbol */
- monitor_create_inferior,
- monitor_mourn_inferior,
- 0, /* can_run */
- 0, /* notice_signals */
- process_stratum,
- 0, /* next */
- 1,
- 1,
- 1,
- 1,
- 1, /* all mem, mem, stack, regs, exec */
- 0,
- 0, /* Section pointers */
- OPS_MAGIC, /* Always the last thing */
-};
-
-struct target_ops mon68_ops = {
- "mon68",
- "Intermetric's MON68 remote serial debug monitor",
- "Use a remote computer running the MON68 debug monitor.\n\
-Specify the serial device it is connected to (e.g. /dev/ttya).",
- mon68_open,
- monitor_close,
- 0,
- monitor_detach,
- monitor_resume,
- monitor_wait,
- monitor_fetch_register,
- monitor_store_register,
- monitor_prepare_to_store,
- monitor_xfer_inferior_memory,
- monitor_files_info,
- monitor_insert_breakpoint,
- monitor_remove_breakpoint, /* Breakpoints */
- 0,
- 0,
- 0,
- 0,
- 0, /* Terminal handling */
- monitor_kill,
- monitor_load, /* load */
- 0, /* lookup_symbol */
- monitor_create_inferior,
- monitor_mourn_inferior,
- 0, /* can_run */
- 0, /* notice_signals */
- process_stratum,
- 0, /* next */
- 1,
- 1,
- 1,
- 1,
- 1, /* all mem, mem, stack, regs, exec */
- 0,
- 0, /* Section pointers */
- OPS_MAGIC, /* Always the last thing */
-};
-
-void
-_initialize_remote_monitors ()
-{
- add_show_from_set (
- add_set_cmd ("remotedebug", no_class, var_boolean,
- (char *)&kiodebug,
- "Set debugging of I/O to a serial based Monitor.\n\
-When enabled, debugging info is displayed.",
- &setlist),
- &showlist);
- add_show_from_set (
- add_set_cmd ("hash", no_class, var_boolean,
- (char *)&hashmark,
- "Set display of activity while downloading a file.\n\
-When enabled, a period \'.\' is displayed.",
- &setlist),
- &showlist);
-
- /* generic monitor command */
- add_com ("monitor <command>", class_obscure, monitor_command,
- "Send a command to the debug monitor.");
-#if 0
- add_com ("connect", class_obscure, connect_command,
- "Connect the terminal directly up to a serial based command monitor.\n\
-Use <CR>~. or <CR>~^D to break out.");
-#endif
-
- add_target (&rom68k_ops);
-/* add_target (&mon68_ops); */
- add_target (&bug_ops);
-}
projects / deliverable / binutils-gdb.git / blobdiff