/* GDB interface to ARM RDI library.
- Copyright 1997, 1998, 1999, 2000, 2001, 2002 Free Software
+ Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2004 Free Software
Foundation, Inc.
This file is part of GDB.
#include "regcache.h"
#include "arm-tdep.h"
-#ifdef USG
-#include <sys/types.h>
-#endif
-
#include <signal.h>
#include "rdi-share/ardi.h"
static void arm_rdi_resume (ptid_t pid, int step,
enum target_signal siggnal);
-static int arm_rdi_start_remote (char *dummy);
-
static void arm_rdi_open (char *name, int from_tty);
-static void arm_rdi_create_inferior (char *exec_file, char *args, char **env);
-
static void arm_rdi_close (int quitting);
static void arm_rdi_store_registers (int regno);
-static void arm_rdi_mourn (void);
-
-static void arm_rdi_send (char *buf);
-
static ptid_t arm_rdi_wait (ptid_t ptid, struct target_waitstatus *status);
static void arm_rdi_kill (void);
static void arm_rdi_detach (char *args, int from_tty);
-static void arm_rdi_interrupt (int signo);
-
-static void arm_rdi_interrupt_twice (int signo);
-
-static void interrupt_query (void);
-
-static int arm_rdi_insert_breakpoint (CORE_ADDR, char *);
+static int arm_rdi_insert_breakpoint (CORE_ADDR, bfd_byte *);
-static int arm_rdi_remove_breakpoint (CORE_ADDR, char *);
+static int arm_rdi_remove_breakpoint (CORE_ADDR, bfd_byte *);
static char *rdi_error_message (int err);
}
*local_bp_list;
\f
-
-/* Stub for catch_errors. */
-
-static int
-arm_rdi_start_remote (char *dummy)
-{
- return 1;
-}
-
/* Helper callbacks for the "host interface" structure. RDI functions call
these to forward output from the target system and so forth. */
char *p;
if (name == NULL)
- error ("To open an RDI connection, you need to specify what serial\n\
-device is attached to the remote system (e.g. /dev/ttya).");
+ error (_("To open an RDI connection, you need to specify what serial\n\
+device is attached to the remote system (e.g. /dev/ttya)."));
/* split name after whitespace, pass tail as arg to open command */
rslt = Adp_OpenDevice (devName, openArgs, rdi_heartbeat);
if (rslt != adp_ok)
- error ("Could not open device \"%s\"", name);
+ error (_("Could not open device \"%s\""), name);
gdb_config.bytesex = 2 | (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 1 : 0);
gdb_config.fpe = 1;
{
printf_filtered ("RDI_open: %s\n", rdi_error_message (rslt));
Adp_CloseDevice ();
- error ("RDI_open failed\n");
+ error (_("RDI_open failed."));
}
rslt = angel_RDI_info (RDIInfo_Target, &arg1, &arg2);
user types "run" after having attached. */
static void
-arm_rdi_create_inferior (char *exec_file, char *args, char **env)
+arm_rdi_create_inferior (char *exec_file, char *args, char **env, int from_tty)
{
int len, rslt;
unsigned long arg1, arg2;
CORE_ADDR entry_point;
if (exec_file == 0 || exec_bfd == 0)
- error ("No executable file specified.");
+ error (_("No executable file specified."));
entry_point = (CORE_ADDR) bfd_get_start_address (exec_bfd);
}
}
\f
-/* Send ^C to target to halt it. Target will respond, and send us a
- packet. */
-
-static void
-arm_rdi_interrupt (int signo)
-{
-}
-
-static void (*ofunc) ();
-
-/* The user typed ^C twice. */
-static void
-arm_rdi_interrupt_twice (int signo)
-{
-}
-
-/* Ask the user what to do when an interrupt is received. */
-
-static void
-interrupt_query (void)
-{
-}
-
/* Wait until the remote machine stops, then return, storing status in
STATUS just as `wait' would. Returns "pid" (though it's not clear
what, if anything, that means in the case of this target). */
/* Read the remote registers into the block REGS. */
-/* ARGSUSED */
static void
arm_rdi_fetch_registers (int regno)
{
for (regno = 0; regno < 15; regno++)
{
store_unsigned_integer (cookedreg, 4, rawregs[regno]);
- supply_register (regno, (char *) cookedreg);
+ regcache_raw_supply (current_regcache, regno, (char *) cookedreg);
}
store_unsigned_integer (cookedreg, 4, rawregs[15]);
- supply_register (ARM_PS_REGNUM, (char *) cookedreg);
+ regcache_raw_supply (current_regcache, ARM_PS_REGNUM, (char *) cookedreg);
arm_rdi_fetch_registers (ARM_PC_REGNUM);
}
else
else if (regno < 0 || regno > 15)
{
rawreg = 0;
- supply_register (regno, (char *) &rawreg);
+ regcache_raw_supply (current_regcache, regno, (char *) &rawreg);
return;
}
else
printf_filtered ("RDI_CPUread: %s\n", rdi_error_message (rslt));
}
store_unsigned_integer (cookedreg, 4, rawreg);
- supply_register (regno, (char *) cookedreg);
+ regcache_raw_supply (current_regcache, regno, (char *) cookedreg);
}
}
if SHOULD_WRITE is nonzero. Returns length of data written or
read; 0 for error. TARGET is unused. */
-/* ARGSUSED */
static int
arm_rdi_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len,
int should_write, struct mem_attrib *attrib,
here. */
static int
-arm_rdi_insert_breakpoint (CORE_ADDR addr, char *contents_cache)
+arm_rdi_insert_breakpoint (CORE_ADDR addr, bfd_byte *contents_cache)
{
int rslt;
PointHandle point;
struct local_bp_list_entry *entry;
int type = RDIPoint_EQ;
- if (arm_pc_is_thumb (addr) || arm_pc_is_thumb_dummy (addr))
+ if (arm_pc_is_thumb (addr))
type |= RDIPoint_16Bit;
rslt = angel_RDI_setbreak (addr, type, 0, &point);
if (rslt != RDIError_NoError)
}
static int
-arm_rdi_remove_breakpoint (CORE_ADDR addr, char *contents_cache)
+arm_rdi_remove_breakpoint (CORE_ADDR addr, bfd_byte *contents_cache)
{
int rslt;
PointHandle point;
arm_rdi_ops.to_fetch_registers = arm_rdi_fetch_registers;
arm_rdi_ops.to_store_registers = arm_rdi_store_registers;
arm_rdi_ops.to_prepare_to_store = arm_rdi_prepare_to_store;
- arm_rdi_ops.to_xfer_memory = arm_rdi_xfer_memory;
+ arm_rdi_ops.deprecated_xfer_memory = arm_rdi_xfer_memory;
arm_rdi_ops.to_files_info = arm_rdi_files_info;
arm_rdi_ops.to_insert_breakpoint = arm_rdi_insert_breakpoint;
arm_rdi_ops.to_remove_breakpoint = arm_rdi_remove_breakpoint;
Adp_SetLogfile (log_filename);
Adp_SetLogEnable (log_enable);
- c = add_cmd ("rdilogfile", class_maintenance,
- rdilogfile_command,
- "Set filename for ADP packet log.\n"
- "This file is used to log Angel Debugger Protocol packets.\n"
- "With a single argument, sets the logfile name to that value.\n"
- "Without an argument, shows the current logfile name.\n"
- "See also: rdilogenable\n",
+ c = add_cmd ("rdilogfile", class_maintenance, rdilogfile_command, _("\
+Set filename for ADP packet log.\n\
+This file is used to log Angel Debugger Protocol packets.\n\
+With a single argument, sets the logfile name to that value.\n\
+Without an argument, shows the current logfile name.\n\
+See also: rdilogenable\n"),
&maintenancelist);
set_cmd_completer (c, filename_completer);
- add_cmd ("rdilogenable", class_maintenance,
- rdilogenable_command,
- "Set enable logging of ADP packets.\n"
- "This will log ADP packets exchanged between gdb and the\n"
- "rdi target device.\n"
- "An argument of 1, t, true, y or yes will enable.\n"
- "An argument of 0, f, false, n or no will disabled.\n"
- "Withough an argument, it will display current state.\n",
+ add_cmd ("rdilogenable", class_maintenance, rdilogenable_command, _("\
+Set enable logging of ADP packets.\n\
+This will log ADP packets exchanged between gdb and the\n\
+rdi target device.\n\
+An argument of 1, t, true, y or yes will enable.\n\
+An argument of 0, f, false, n or no will disabled.\n\
+Withough an argument, it will display current state."),
&maintenancelist);
- add_setshow_boolean_cmd
- ("rdiromatzero", no_class, &rom_at_zero,
- "Set target has ROM at addr 0.\n"
- "A true value disables vector catching, false enables vector catching.\n"
- "This is evaluated at the time the 'target rdi' command is executed\n",
- "Show if target has ROM at addr 0.\n",
- NULL, NULL,
- &setlist, &showlist);
-
- add_setshow_boolean_cmd
- ("rdiheartbeat", no_class, &rdi_heartbeat,
- "Set enable for ADP heartbeat packets.\n"
- "I don't know why you would want this. If you enable them,\n"
- "it will confuse ARM and EPI JTAG interface boxes as well\n"
- "as the Angel Monitor.\n",
- "Show enable for ADP heartbeat packets.\n",
- NULL, NULL,
- &setlist, &showlist);
+ add_setshow_boolean_cmd ("rdiromatzero", no_class, &rom_at_zero, _("\
+Set target has ROM at addr 0."), _("\
+Show if target has ROM at addr 0."), _("\
+A true value disables vector catching, false enables vector catching.\n\
+This is evaluated at the time the 'target rdi' command is executed."),
+ NULL,
+ NULL, /* FIXME: i18n: Target has ROM at addr 0 is %s. */
+ &setlist, &showlist);
+
+ add_setshow_boolean_cmd ("rdiheartbeat", no_class, &rdi_heartbeat, _("\
+Set enable for ADP heartbeat packets."), _("\
+Show enable for ADP heartbeat packets."), _("\
+I don't know why you would want this. If you enable them,\n\
+it will confuse ARM and EPI JTAG interface boxes as well\n\
+as the Angel Monitor."),
+ NULL,
+ NULL, /* FIXME: i18n: Enable for ADP heartbeat packets is %s. */
+ &setlist, &showlist);
}
/* A little dummy to make linking with the library succeed. */
void
-Fail (const char *ignored)
+Fail (const char *ignored, ...)
{
}
projects / deliverable / binutils-gdb.git / blobdiff