}
static void
-myprint (PTR arg, const char *format, va_list ap)
+myprint (void *arg, const char *format, va_list ap)
{
vfprintf_unfiltered (gdb_stdout, format, ap);
}
static void
-mywritec (PTR arg, int c)
+mywritec (void *arg, int c)
{
if (isascii (c))
fputc_unfiltered (c, gdb_stdout);
}
static int
-mywrite (PTR arg, char const *buffer, int len)
+mywrite (void *arg, char const *buffer, int len)
{
int i;
char *e;
}
static void
-mypause (PTR arg)
+mypause (void *arg)
{
}
being interrupted more carefully */
static int
-myreadc (PTR arg)
+myreadc (void *arg)
{
return fgetc (stdin);
}
static char *
-mygets (PTR arg, char *buffer, int len)
+mygets (void *arg, char *buffer, int len)
{
return fgets (buffer, len, stdin);
}
rslt = angel_RDI_open (10, &gdb_config, &gdb_hostif, NULL);
if (rslt == RDIError_BigEndian || rslt == RDIError_LittleEndian)
; /* do nothing, this is the expected return */
- else if (rslt)
+ else if (rslt != RDIError_NoError)
{
printf_filtered ("RDI_open: %s\n", rdi_error_message (rslt));
Adp_CloseDevice ();
}
rslt = angel_RDI_info (RDIInfo_Target, &arg1, &arg2);
- if (rslt)
+ if (rslt != RDIError_NoError)
{
printf_filtered ("RDI_info: %s\n", rdi_error_message (rslt));
}
rslt = angel_RDI_info (RDIInfo_Points, &arg1, &arg2);
- if (rslt)
+ if (rslt != RDIError_NoError)
{
printf_filtered ("RDI_info: %s\n", rdi_error_message (rslt));
}
rslt = angel_RDI_info (RDIInfo_Step, &arg1, &arg2);
- if (rslt)
+ if (rslt != RDIError_NoError)
{
printf_filtered ("RDI_info: %s\n", rdi_error_message (rslt));
}
rslt = angel_RDI_info (RDIInfo_CoPro, &arg1, &arg2);
- if (rslt)
+ if (rslt != RDIError_NoError)
{
printf_filtered ("RDI_info: %s\n", rdi_error_message (rslt));
}
rslt = angel_RDI_info (RDIInfo_SemiHosting, &arg1, &arg2);
- if (rslt)
+ if (rslt != RDIError_NoError)
{
printf_filtered ("RDI_info: %s\n", rdi_error_message (rslt));
}
rslt = angel_RDI_info (RDIInfo_GetLoadSize, &arg1, &arg2);
- if (rslt)
+ if (rslt != RDIError_NoError)
{
printf_filtered ("RDI_info: %s\n", rdi_error_message (rslt));
}
target_fetch_registers (-1);
rslt = angel_RDI_open (1, &gdb_config, NULL, NULL);
- if (rslt)
+ if (rslt != RDIError_NoError)
{
printf_filtered ("RDI_open: %s\n", rdi_error_message (rslt));
}
arg1 = rom_at_zero ? 0x0 : 0x13b;
rslt = angel_RDI_info (RDIVector_Catch, &arg1, &arg2);
- if (rslt)
+ if (rslt != RDIError_NoError)
{
printf_filtered ("RDI_info: %s\n", rdi_error_message (rslt));
}
arg1 = (unsigned long) "";
rslt = angel_RDI_info (RDISet_Cmdline, &arg1, &arg2);
- if (rslt)
+ if (rslt != RDIError_NoError)
{
printf_filtered ("RDI_info: %s\n", rdi_error_message (rslt));
}
top_of_memory);
rslt = angel_RDI_info (RDIInfo_SetTopMem, &top_of_memory, &arg2);
- if (rslt)
+ if (rslt != RDIError_NoError)
{
printf_filtered ("RDI_info: %s\n", rdi_error_message (rslt));
}
arg1 = (unsigned long) arg_buf;
rslt = angel_RDI_info (RDISet_Cmdline, /* &arg1 */ (unsigned long *) arg_buf, &arg2);
- if (rslt)
+ if (rslt != RDIError_NoError)
{
printf_filtered ("RDI_info: %s\n", rdi_error_message (rslt));
}
if (!closed_already)
{
rslt = angel_RDI_close ();
- if (rslt)
+ if (rslt != RDIError_NoError)
{
printf_filtered ("RDI_close: %s\n", rdi_error_message (rslt));
}
if (0 /* turn on when hardware supports single-stepping */ )
{
rslt = angel_RDI_step (1, &point);
- if (rslt)
- {
- printf_filtered ("RDI_step: %s\n", rdi_error_message (rslt));
- }
+ if (rslt != RDIError_NoError)
+ printf_filtered ("RDI_step: %s\n", rdi_error_message (rslt));
}
else
{
char handle[4];
- CORE_ADDR pc;
+ CORE_ADDR pc = 0;
if (step)
{
pc = arm_get_next_pc (pc);
arm_rdi_insert_breakpoint (pc, handle);
}
+
execute_status = rslt = angel_RDI_execute (&point);
- if (rslt == RDIError_BreakpointReached)
- ;
- else if (rslt)
- {
- printf_filtered ("RDI_execute: %s\n", rdi_error_message (rslt));
- }
+ if (rslt != RDIError_NoError && rslt != RDIError_BreakpointReached)
+ printf_filtered ("RDI_execute: %s\n", rdi_error_message (rslt));
+
if (step)
- {
- arm_rdi_remove_breakpoint (pc, handle);
- }
+ arm_rdi_remove_breakpoint (pc, handle);
}
}
\f
if (regno == -1)
{
rslt = angel_RDI_CPUread (255, 0x27fff, rawregs);
- if (rslt)
+ if (rslt != RDIError_NoError)
{
printf_filtered ("RDI_CPUread: %s\n", rdi_error_message (rslt));
}
rdi_regmask = 1 << regno;
rslt = angel_RDI_CPUread (255, rdi_regmask, &rawreg);
- if (rslt)
+ if (rslt != RDIError_NoError)
{
printf_filtered ("RDI_CPUread: %s\n", rdi_error_message (rslt));
}
}
else
{
- read_register_gen (regno, (char *) rawreg);
+ deprecated_read_register_gen (regno, (char *) rawreg);
/* RDI manipulates data in host byte order, so convert now. */
store_unsigned_integer (rawerreg, 4, rawreg[0]);
rdi_regmask = 1 << regno;
rslt = angel_RDI_CPUwrite (255, rdi_regmask, rawerreg);
- if (rslt)
+ if (rslt != RDIError_NoError)
{
printf_filtered ("RDI_CPUwrite: %s\n", rdi_error_message (rslt));
}
if (should_write)
{
rslt = angel_RDI_write (myaddr, memaddr, &len);
- if (rslt)
+ if (rslt != RDIError_NoError)
{
printf_filtered ("RDI_write: %s\n", rdi_error_message (rslt));
}
else
{
rslt = angel_RDI_read (memaddr, myaddr, &len);
- if (rslt)
+ if (rslt != RDIError_NoError)
{
printf_filtered ("RDI_read: %s\n", rdi_error_message (rslt));
len = 0;
unsigned long arg1, arg2;
rslt = angel_RDI_info (RDIInfo_Target, &arg1, &arg2);
- if (rslt)
+ if (rslt != RDIError_NoError)
{
printf_filtered ("RDI_info: %s\n", rdi_error_message (rslt));
}
printf_filtered ("Target is real hardware.\n");
rslt = angel_RDI_info (RDIInfo_Step, &arg1, &arg2);
- if (rslt)
+ if (rslt != RDIError_NoError)
{
printf_filtered ("RDI_info: %s\n", rdi_error_message (rslt));
}
printf_filtered ("Target can%s single-step.\n", (arg1 & 0x4 ? "" : "not"));
rslt = angel_RDI_info (RDIInfo_Icebreaker, &arg1, &arg2);
- if (rslt)
+ if (rslt != RDIError_NoError)
{
printf_filtered ("RDI_info: %s\n", rdi_error_message (rslt));
}
int rslt;
rslt = angel_RDI_open (1, &gdb_config, NULL, NULL);
- if (rslt)
+ if (rslt != RDIError_NoError)
{
printf_filtered ("RDI_open: %s\n", rdi_error_message (rslt));
}
if (arm_pc_is_thumb (addr) || arm_pc_is_thumb_dummy (addr))
type |= RDIPoint_16Bit;
rslt = angel_RDI_setbreak (addr, type, 0, &point);
- if (rslt)
+ if (rslt != RDIError_NoError)
{
printf_filtered ("RDI_setbreak: %s\n", rdi_error_message (rslt));
}
{
int rslt;
PointHandle point;
- struct local_bp_list_entry *entry, *preventry;
+ struct local_bp_list_entry **entryp, *dead;
- for (entry = local_bp_list; entry != NULL; entry = entry->next)
- {
- if (entry->addr == addr)
- {
- break;
- }
- preventry = entry;
- }
- if (entry)
+ for (entryp = &local_bp_list; *entryp != NULL; entryp = &(*entryp)->next)
+ if ((*entryp)->addr == addr)
+ break;
+
+ if (*entryp)
{
- rslt = angel_RDI_clearbreak (entry->point);
- if (rslt)
- {
- printf_filtered ("RDI_clearbreak: %s\n", rdi_error_message (rslt));
- }
+ dead = *entryp;
+ rslt = angel_RDI_clearbreak (dead->point);
+ if (rslt != RDIError_NoError)
+ printf_filtered ("RDI_clearbreak: %s\n", rdi_error_message (rslt));
+
/* Delete the breakpoint entry locally. */
- if (entry == local_bp_list)
- {
- local_bp_list = entry->next;
- }
- else
- {
- preventry->next = entry->next;
- }
- xfree (entry);
+ *entryp = dead->next;
+ xfree (dead);
}
+
return 0;
}
+
\f
static char *
rdi_error_message (int err)
c = add_cmd ("rdilogfile", class_maintenance,
rdilogfile_command,
- "Set filename for ADP packet log.\n\
-This file is used to log Angel Debugger Protocol packets.\n\
-With a single argument, sets the logfile name to that value.\n\
-Without an argument, shows the current logfile name.\n\
-See also: rdilogenable\n",
- &maintenancelist);
+ "Set filename for ADP packet log.\n"
+ "This file is used to log Angel Debugger Protocol packets.\n"
+ "With a single argument, sets the logfile name to that value.\n"
+ "Without an argument, shows the current logfile name.\n"
+ "See also: rdilogenable\n",
+ &maintenancelist);
set_cmd_completer (c, filename_completer);
add_cmd ("rdilogenable", class_maintenance,
rdilogenable_command,
- "Set enable logging of ADP packets.\n\
-This will log ADP packets exchanged between gdb and the\n\
-rdi target device.\n\
-An argument of 1,t,true,y,yes will enable.\n\
-An argument of 0,f,false,n,no will disabled.\n\
-Withough an argument, it will display current state.\n",
+ "Set enable logging of ADP packets.\n"
+ "This will log ADP packets exchanged between gdb and the\n"
+ "rdi target device.\n"
+ "An argument of 1, t, true, y or yes will enable.\n"
+ "An argument of 0, f, false, n or no will disabled.\n"
+ "Withough an argument, it will display current state.\n",
&maintenancelist);
- add_show_from_set
- (add_set_cmd ("rdiromatzero", no_class,
- var_boolean, (char *) &rom_at_zero,
- "Set target has ROM at addr 0.\n\
-A true value disables vector catching, false enables vector catching.\n\
-This is evaluated at the time the 'target rdi' command is executed\n",
- &setlist),
- &showlist);
-
- add_show_from_set
- (add_set_cmd ("rdiheartbeat", no_class,
- var_boolean, (char *) &rdi_heartbeat,
- "Set enable for ADP heartbeat packets.\n\
-I don't know why you would want this. If you enable them,\n\
-it will confuse ARM and EPI JTAG interface boxes as well\n\
-as the Angel Monitor.\n",
- &setlist),
- &showlist);
+ add_setshow_boolean_cmd
+ ("rdiromatzero", no_class, &rom_at_zero,
+ "Set target has ROM at addr 0.\n"
+ "A true value disables vector catching, false enables vector catching.\n"
+ "This is evaluated at the time the 'target rdi' command is executed\n",
+ "Show if target has ROM at addr 0.\n",
+ NULL, NULL,
+ &setlist, &showlist);
+
+ add_setshow_boolean_cmd
+ ("rdiheartbeat", no_class, &rdi_heartbeat,
+ "Set enable for ADP heartbeat packets.\n"
+ "I don't know why you would want this. If you enable them,\n"
+ "it will confuse ARM and EPI JTAG interface boxes as well\n"
+ "as the Angel Monitor.\n",
+ "Show enable for ADP heartbeat packets.\n",
+ NULL, NULL,
+ &setlist, &showlist);
}
/* A little dummy to make linking with the library succeed. */
projects / deliverable / binutils-gdb.git / blobdiff