/* Remote target communications for serial-line targets in custom GDB protocol
Copyright (C) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997,
- 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
- Free Software Foundation, Inc.
+ 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009,
+ 2010 Free Software Foundation, Inc.
This file is part of GDB.
#include "remote-fileio.h"
#include "gdb/fileio.h"
#include "gdb_stat.h"
+#include "xml-support.h"
#include "memory-map.h"
+#include "tracepoint.h"
+#include "ax.h"
+#include "ax-gdb.h"
+
+/* temp hacks for tracepoint encoding migration */
+static char *target_buf;
+static long target_buf_size;
+/*static*/ void
+encode_actions (struct breakpoint *t, struct bp_location *tloc,
+ char ***tdp_actions, char ***stepping_actions);
+
/* The size to align memory write packets, when practical. The protocol
does not guarantee any alignment, and gdb will generate short
writes and unaligned writes, but even as a best-effort attempt this
static void print_packet (char *);
-static unsigned long crc32 (unsigned char *, int, unsigned int);
-
static void compare_sections_command (char *, int);
static void packet_command (char *, int);
static int fromhex (int a);
-static int hex2bin (const char *hex, gdb_byte *bin, int count);
+extern int hex2bin (const char *hex, gdb_byte *bin, int count);
-static int bin2hex (const gdb_byte *bin, char *hex, int count);
+extern int bin2hex (const gdb_byte *bin, char *hex, int count);
static int putpkt_binary (char *buf, int cnt);
static char *write_ptid (char *buf, const char *endbuf, ptid_t ptid);
static ptid_t read_ptid (char *buf, char **obuf);
+static void remote_set_permissions (void);
+
+struct remote_state;
+static int remote_get_trace_status (struct trace_status *ts);
+
+static int remote_upload_tracepoints (struct uploaded_tp **utpp);
+
+static int remote_upload_trace_state_variables (struct uploaded_tsv **utsvp);
+
static void remote_query_supported (void);
static void remote_check_symbols (struct objfile *objfile);
static int remote_read_description_p (struct target_ops *target);
+static void remote_console_output (char *msg);
+
/* The non-stop remote protocol provisions for one pending stop reply.
This is where we keep it until it is acknowledged. */
/* True if the stub reports support for conditional tracepoints. */
int cond_tracepoints;
+
+ /* True if the stub reports support for fast tracepoints. */
+ int fast_tracepoints;
+
+ /* True if the stub reports support for static tracepoints. */
+ int static_tracepoints;
+
+ /* True if the stub can continue running a trace while GDB is
+ disconnected. */
+ int disconnected_tracing;
+
+ /* Nonzero if the user has pressed Ctrl-C, but the target hasn't
+ responded to that. */
+ int ctrlc_pending_p;
};
+/* Private data that we'll store in (struct thread_info)->private. */
+struct private_thread_info
+{
+ char *extra;
+ int core;
+};
+
+static void
+free_private_thread_info (struct private_thread_info *info)
+{
+ xfree (info->extra);
+ xfree (info);
+}
+
/* Returns true if the multi-process extensions are in effect. */
static int
remote_multi_process_p (struct remote_state *rs)
long remote_packet_size;
};
+long sizeof_pkt = 2000;
+
+/* Utility: generate error from an incoming stub packet. */
+static void
+trace_error (char *buf)
+{
+ if (*buf++ != 'E')
+ return; /* not an error msg */
+ switch (*buf)
+ {
+ case '1': /* malformed packet error */
+ if (*++buf == '0') /* general case: */
+ error (_("remote.c: error in outgoing packet."));
+ else
+ error (_("remote.c: error in outgoing packet at field #%ld."),
+ strtol (buf, NULL, 16));
+ case '2':
+ error (_("trace API error 0x%s."), ++buf);
+ default:
+ error (_("Target returns error code '%s'."), buf);
+ }
+}
+
+/* Utility: wait for reply from stub, while accepting "O" packets. */
+static char *
+remote_get_noisy_reply (char **buf_p,
+ long *sizeof_buf)
+{
+ do /* Loop on reply from remote stub. */
+ {
+ char *buf;
+
+ QUIT; /* allow user to bail out with ^C */
+ getpkt (buf_p, sizeof_buf, 0);
+ buf = *buf_p;
+ if (buf[0] == 'E')
+ trace_error (buf);
+ else if (strncmp (buf, "qRelocInsn:", strlen ("qRelocInsn:")) == 0)
+ {
+ ULONGEST ul;
+ CORE_ADDR from, to, org_to;
+ char *p, *pp;
+ int adjusted_size = 0;
+ volatile struct gdb_exception ex;
+
+ p = buf + strlen ("qRelocInsn:");
+ pp = unpack_varlen_hex (p, &ul);
+ if (*pp != ';')
+ error (_("invalid qRelocInsn packet: %s"), buf);
+ from = ul;
+
+ p = pp + 1;
+ pp = unpack_varlen_hex (p, &ul);
+ to = ul;
+
+ org_to = to;
+
+ TRY_CATCH (ex, RETURN_MASK_ALL)
+ {
+ gdbarch_relocate_instruction (target_gdbarch, &to, from);
+ }
+ if (ex.reason >= 0)
+ {
+ adjusted_size = to - org_to;
+
+ sprintf (buf, "qRelocInsn:%x", adjusted_size);
+ putpkt (buf);
+ }
+ else if (ex.reason < 0 && ex.error == MEMORY_ERROR)
+ {
+ /* Propagate memory errors silently back to the target.
+ The stub may have limited the range of addresses we
+ can write to, for example. */
+ putpkt ("E01");
+ }
+ else
+ {
+ /* Something unexpectedly bad happened. Be verbose so
+ we can tell what, and propagate the error back to the
+ stub, so it doesn't get stuck waiting for a
+ response. */
+ exception_fprintf (gdb_stderr, ex,
+ _("warning: relocating instruction: "));
+ putpkt ("E01");
+ }
+ }
+ else if (buf[0] == 'O' && buf[1] != 'K')
+ remote_console_output (buf + 1); /* 'O' message from stub */
+ else
+ return buf; /* here's the actual reply */
+ }
+ while (1);
+}
/* Handle for retreving the remote protocol data from gdbarch. */
static struct gdbarch_data *remote_gdbarch_data_handle;
else
{
struct packet_reg *r = &rsa->regs[regnum];
+
gdb_assert (r->regnum == regnum);
return r;
}
packet_reg_from_pnum (struct remote_arch_state *rsa, LONGEST pnum)
{
int i;
+
for (i = 0; i < gdbarch_num_regs (target_gdbarch); i++)
{
struct packet_reg *r = &rsa->regs[i];
+
if (r->pnum == pnum)
return r;
}
this can go away. */
static int wait_forever_enabled_p = 1;
+/* Allow the user to specify what sequence to send to the remote
+ when he requests a program interruption: Although ^C is usually
+ what remote systems expect (this is the default, here), it is
+ sometimes preferable to send a break. On other systems such
+ as the Linux kernel, a break followed by g, which is Magic SysRq g
+ is required in order to interrupt the execution. */
+const char interrupt_sequence_control_c[] = "Ctrl-C";
+const char interrupt_sequence_break[] = "BREAK";
+const char interrupt_sequence_break_g[] = "BREAK-g";
+static const char *interrupt_sequence_modes[] =
+ {
+ interrupt_sequence_control_c,
+ interrupt_sequence_break,
+ interrupt_sequence_break_g,
+ NULL
+ };
+static const char *interrupt_sequence_mode = interrupt_sequence_control_c;
+
+static void
+show_interrupt_sequence (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c,
+ const char *value)
+{
+ if (interrupt_sequence_mode == interrupt_sequence_control_c)
+ fprintf_filtered (file,
+ _("Send the ASCII ETX character (Ctrl-c) "
+ "to the remote target to interrupt the "
+ "execution of the program.\n"));
+ else if (interrupt_sequence_mode == interrupt_sequence_break)
+ fprintf_filtered (file,
+ _("send a break signal to the remote target "
+ "to interrupt the execution of the program.\n"));
+ else if (interrupt_sequence_mode == interrupt_sequence_break_g)
+ fprintf_filtered (file,
+ _("Send a break signal and 'g' a.k.a. Magic SysRq g to "
+ "the remote target to interrupt the execution "
+ "of Linux kernel.\n"));
+ else
+ internal_error (__FILE__, __LINE__,
+ _("Invalid value for interrupt_sequence_mode: %s."),
+ interrupt_sequence_mode);
+}
-/* This variable chooses whether to send a ^C or a break when the user
- requests program interruption. Although ^C is usually what remote
- systems expect, and that is the default here, sometimes a break is
- preferable instead. */
+/* This boolean variable specifies whether interrupt_sequence is sent
+ to the remote target when gdb connects to it.
+ This is mostly needed when you debug the Linux kernel: The Linux kernel
+ expects BREAK g which is Magic SysRq g for connecting gdb. */
+static int interrupt_on_connect = 0;
+/* This variable is used to implement the "set/show remotebreak" commands.
+ Since these commands are now deprecated in favor of "set/show remote
+ interrupt-sequence", it no longer has any effect on the code. */
static int remote_break;
+static void
+set_remotebreak (char *args, int from_tty, struct cmd_list_element *c)
+{
+ if (remote_break)
+ interrupt_sequence_mode = interrupt_sequence_break;
+ else
+ interrupt_sequence_mode = interrupt_sequence_control_c;
+}
+
+static void
+show_remotebreak (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c,
+ const char *value)
+{
+}
+
/* Descriptor for I/O to remote machine. Initialize it to NULL so that
remote_open knows that we don't have a file open when the program
starts. */
{
int fixed_p = config->fixed_p;
long size = config->size;
+
if (args == NULL)
error (_("Argument required (integer, `fixed' or `limited')."));
else if (strcmp (args, "hard") == 0
else
{
char *end;
+
size = strtoul (args, &end, 0);
if (args == end)
error (_("Invalid %s (bad syntax)."), config->name);
get_memory_read_packet_size (void)
{
long size = get_memory_packet_size (&memory_read_packet_config);
+
/* FIXME: cagney/1999-11-07: Functions like getpkt() need to get an
extra buffer size argument before the memory read size can be
increased beyond this. */
show_packet_config_cmd (struct packet_config *config)
{
char *support = "internal-error";
+
switch (config->support)
{
case PACKET_ENABLE:
set_remote_protocol_packet_cmd,
show_remote_protocol_packet_cmd,
&remote_set_cmdlist, &remote_show_cmdlist);
+ /* The command code copies the documentation strings. */
+ xfree (set_doc);
+ xfree (show_doc);
/* set/show remote NAME-packet {auto,on,off} -- legacy. */
if (legacy)
{
char *legacy_name;
+
legacy_name = xstrprintf ("%s-packet", name);
add_alias_cmd (legacy_name, cmd_name, class_obscure, 0,
&remote_set_cmdlist);
PACKET_qXfer_spu_read,
PACKET_qXfer_spu_write,
PACKET_qXfer_osdata,
+ PACKET_qXfer_threads,
+ PACKET_qXfer_statictrace_read,
+ PACKET_qGetTIBAddr,
PACKET_qGetTLSAddr,
PACKET_qSupported,
PACKET_QPassSignals,
PACKET_qXfer_siginfo_write,
PACKET_qAttached,
PACKET_ConditionalTracepoints,
+ PACKET_FastTracepoints,
+ PACKET_StaticTracepoints,
+ PACKET_bc,
+ PACKET_bs,
+ PACKET_TracepointSource,
+ PACKET_QAllow,
PACKET_MAX
};
struct cmd_list_element *c)
{
int i;
+
for (i = 0; i < NR_Z_PACKET_TYPES; i++)
{
remote_protocol_packets[PACKET_Z0 + i].detect = remote_Z_packet_detect;
const char *value)
{
int i;
+
for (i = 0; i < NR_Z_PACKET_TYPES; i++)
{
show_packet_config_cmd (&remote_protocol_packets[PACKET_Z0 + i]);
static struct inferior *
remote_add_inferior (int pid, int attached)
{
- struct remote_state *rs = get_remote_state ();
struct inferior *inf;
/* Check whether this process we're learning about is to be
if (attached == -1)
attached = remote_query_attached (pid);
- inf = add_inferior (pid);
+ if (gdbarch_has_global_solist (target_gdbarch))
+ {
+ /* If the target shares code across all inferiors, then every
+ attach adds a new inferior. */
+ inf = add_inferior (pid);
+
+ /* ... and every inferior is bound to the same program space.
+ However, each inferior may still have its own address
+ space. */
+ inf->aspace = maybe_new_address_space ();
+ inf->pspace = current_program_space;
+ }
+ else
+ {
+ /* In the traditional debugging scenario, there's a 1-1 match
+ between program/address spaces. We simply bind the inferior
+ to the program space's address space. */
+ inf = current_inferior ();
+ inferior_appeared (inf, pid);
+ }
inf->attach_flag = attached;
static void
remote_notice_new_inferior (ptid_t currthread, int running)
{
- struct remote_state *rs = get_remote_state ();
-
/* If this is a new thread, add it to GDB's thread list.
If we leave it up to WFI to do this, bad things will happen. */
remote_add_thread (currthread, running);
inferior_ptid = currthread;
}
- return;
+ return;
}
if (ptid_equal (magic_null_ptid, inferior_ptid))
doesn't support qC. This is the first stop reported
after an attach, so this is the main thread. Update the
ptid in the thread list. */
- thread_change_ptid (inferior_ptid, currthread);
+ thread_change_ptid (inferior_ptid, currthread);
return;
}
}
}
+/* Return the private thread data, creating it if necessary. */
+
+struct private_thread_info *
+demand_private_info (ptid_t ptid)
+{
+ struct thread_info *info = find_thread_ptid (ptid);
+
+ gdb_assert (info);
+
+ if (!info->private)
+ {
+ info->private = xmalloc (sizeof (*(info->private)));
+ info->private_dtor = free_private_thread_info;
+ info->private->core = -1;
+ info->private->extra = 0;
+ }
+
+ return info->private;
+}
+
/* Call this function as a result of
1) A halt indication (T packet) containing a thread id
2) A direct query of currthread
record_currthread (ptid_t currthread)
{
general_thread = currthread;
-
- if (ptid_equal (currthread, minus_one_ptid))
- /* We're just invalidating the local thread mirror. */
- return;
-
- remote_notice_new_inferior (currthread, 0);
}
static char *last_pass_packet;
}
}
+static void
+remote_notice_signals (ptid_t ptid)
+{
+ /* Update the remote on signals to silently pass, if they've
+ changed. */
+ remote_pass_signals ();
+}
+
/* If PTID is MAGIC_NULL_PTID, don't set any thread. If PTID is
MINUS_ONE_PTID, set the thread to -1, so the stub returns the
thread. If GEN is set, set the general thread, if not, then set
remote_thread_alive (struct target_ops *ops, ptid_t ptid)
{
struct remote_state *rs = get_remote_state ();
- int tid = ptid_get_tid (ptid);
char *p, *endp;
if (ptid_equal (ptid, magic_null_ptid))
char *p = buf;
char *pp;
ULONGEST pid = 0, tid = 0;
- ptid_t ptid;
if (*p == 'p')
{
remote_current_thread (ptid_t oldpid)
{
struct remote_state *rs = get_remote_state ();
- char *p = rs->buf;
- int tid;
- int pid;
putpkt ("qC");
getpkt (&rs->buf, &rs->buf_size, 0);
CRAZY_MAX_THREADS);
}
+#if defined(HAVE_LIBEXPAT)
+
+typedef struct thread_item
+{
+ ptid_t ptid;
+ char *extra;
+ int core;
+} thread_item_t;
+DEF_VEC_O(thread_item_t);
+
+struct threads_parsing_context
+{
+ VEC (thread_item_t) *items;
+};
+
+static void
+start_thread (struct gdb_xml_parser *parser,
+ const struct gdb_xml_element *element,
+ void *user_data, VEC(gdb_xml_value_s) *attributes)
+{
+ struct threads_parsing_context *data = user_data;
+
+ struct thread_item item;
+ char *id;
+
+ id = VEC_index (gdb_xml_value_s, attributes, 0)->value;
+ item.ptid = read_ptid (id, NULL);
+
+ if (VEC_length (gdb_xml_value_s, attributes) > 1)
+ item.core = *(ULONGEST *) VEC_index (gdb_xml_value_s, attributes, 1)->value;
+ else
+ item.core = -1;
+
+ item.extra = 0;
+
+ VEC_safe_push (thread_item_t, data->items, &item);
+}
+
+static void
+end_thread (struct gdb_xml_parser *parser,
+ const struct gdb_xml_element *element,
+ void *user_data, const char *body_text)
+{
+ struct threads_parsing_context *data = user_data;
+
+ if (body_text && *body_text)
+ VEC_last (thread_item_t, data->items)->extra = xstrdup (body_text);
+}
+
+const struct gdb_xml_attribute thread_attributes[] = {
+ { "id", GDB_XML_AF_NONE, NULL, NULL },
+ { "core", GDB_XML_AF_OPTIONAL, gdb_xml_parse_attr_ulongest, NULL },
+ { NULL, GDB_XML_AF_NONE, NULL, NULL }
+};
+
+const struct gdb_xml_element thread_children[] = {
+ { NULL, NULL, NULL, GDB_XML_EF_NONE, NULL, NULL }
+};
+
+const struct gdb_xml_element threads_children[] = {
+ { "thread", thread_attributes, thread_children,
+ GDB_XML_EF_REPEATABLE | GDB_XML_EF_OPTIONAL,
+ start_thread, end_thread },
+ { NULL, NULL, NULL, GDB_XML_EF_NONE, NULL, NULL }
+};
+
+const struct gdb_xml_element threads_elements[] = {
+ { "threads", NULL, threads_children,
+ GDB_XML_EF_NONE, NULL, NULL },
+ { NULL, NULL, NULL, GDB_XML_EF_NONE, NULL, NULL }
+};
+
+/* Discard the contents of the constructed thread info context. */
+
+static void
+clear_threads_parsing_context (void *p)
+{
+ struct threads_parsing_context *context = p;
+ int i;
+ struct thread_item *item;
+
+ for (i = 0; VEC_iterate (thread_item_t, context->items, i, item); ++i)
+ xfree (item->extra);
+
+ VEC_free (thread_item_t, context->items);
+}
+
+#endif
+
/*
* Find all threads for info threads command.
* Uses new thread protocol contributed by Cisco.
if (remote_desc == 0) /* paranoia */
error (_("Command can only be used when connected to the remote target."));
+#if defined(HAVE_LIBEXPAT)
+ if (remote_protocol_packets[PACKET_qXfer_threads].support == PACKET_ENABLE)
+ {
+ char *xml = target_read_stralloc (¤t_target,
+ TARGET_OBJECT_THREADS, NULL);
+
+ struct cleanup *back_to = make_cleanup (xfree, xml);
+ if (xml && *xml)
+ {
+ struct gdb_xml_parser *parser;
+ struct threads_parsing_context context;
+ struct cleanup *clear_parsing_context;
+
+ context.items = 0;
+ /* Note: this parser cleanup is already guarded by BACK_TO
+ above. */
+ parser = gdb_xml_create_parser_and_cleanup (_("threads"),
+ threads_elements,
+ &context);
+
+ gdb_xml_use_dtd (parser, "threads.dtd");
+
+ clear_parsing_context
+ = make_cleanup (clear_threads_parsing_context, &context);
+
+ if (gdb_xml_parse (parser, xml) == 0)
+ {
+ int i;
+ struct thread_item *item;
+
+ for (i = 0; VEC_iterate (thread_item_t, context.items, i, item); ++i)
+ {
+ if (!ptid_equal (item->ptid, null_ptid))
+ {
+ struct private_thread_info *info;
+ /* In non-stop mode, we assume new found threads
+ are running until proven otherwise with a
+ stop reply. In all-stop, we can only get
+ here if all threads are stopped. */
+ int running = non_stop ? 1 : 0;
+
+ remote_notice_new_inferior (item->ptid, running);
+
+ info = demand_private_info (item->ptid);
+ info->core = item->core;
+ info->extra = item->extra;
+ item->extra = NULL;
+ }
+ }
+ }
+
+ do_cleanups (clear_parsing_context);
+ }
+
+ do_cleanups (back_to);
+ return;
+ }
+#endif
+
if (use_threadinfo_query)
{
putpkt ("qfThreadInfo");
server doesn't know about it. */
return NULL;
+ if (remote_protocol_packets[PACKET_qXfer_threads].support == PACKET_ENABLE)
+ {
+ struct thread_info *info = find_thread_ptid (tp->ptid);
+
+ if (info && info->private)
+ return info->private->extra;
+ else
+ return NULL;
+ }
+
if (use_threadextra_query)
{
char *b = rs->buf;
}
\f
+static int
+remote_static_tracepoint_marker_at (CORE_ADDR addr,
+ struct static_tracepoint_marker *marker)
+{
+ struct remote_state *rs = get_remote_state ();
+ char *p = rs->buf;
+
+ sprintf (p, "qTSTMat:");
+ p += strlen (p);
+ p += hexnumstr (p, addr);
+ putpkt (rs->buf);
+ getpkt (&rs->buf, &rs->buf_size, 0);
+ p = rs->buf;
+
+ if (*p == 'E')
+ error (_("Remote failure reply: %s"), p);
+
+ if (*p++ == 'm')
+ {
+ parse_static_tracepoint_marker_definition (p, &p, marker);
+ return 1;
+ }
+
+ return 0;
+}
+
+static void
+free_current_marker (void *arg)
+{
+ struct static_tracepoint_marker **marker_p = arg;
+
+ if (*marker_p != NULL)
+ {
+ release_static_tracepoint_marker (*marker_p);
+ xfree (*marker_p);
+ }
+ else
+ *marker_p = NULL;
+}
+
+static VEC(static_tracepoint_marker_p) *
+remote_static_tracepoint_markers_by_strid (const char *strid)
+{
+ struct remote_state *rs = get_remote_state ();
+ VEC(static_tracepoint_marker_p) *markers = NULL;
+ struct static_tracepoint_marker *marker = NULL;
+ struct cleanup *old_chain;
+ char *p;
+
+ /* Ask for a first packet of static tracepoint marker
+ definition. */
+ putpkt ("qTfSTM");
+ getpkt (&rs->buf, &rs->buf_size, 0);
+ p = rs->buf;
+ if (*p == 'E')
+ error (_("Remote failure reply: %s"), p);
+
+ old_chain = make_cleanup (free_current_marker, &marker);
+
+ while (*p++ == 'm')
+ {
+ if (marker == NULL)
+ marker = XCNEW (struct static_tracepoint_marker);
+
+ do
+ {
+ parse_static_tracepoint_marker_definition (p, &p, marker);
+
+ if (strid == NULL || strcmp (strid, marker->str_id) == 0)
+ {
+ VEC_safe_push (static_tracepoint_marker_p,
+ markers, marker);
+ marker = NULL;
+ }
+ else
+ {
+ release_static_tracepoint_marker (marker);
+ memset (marker, 0, sizeof (*marker));
+ }
+ }
+ while (*p++ == ','); /* comma-separated list */
+ /* Ask for another packet of static tracepoint definition. */
+ putpkt ("qTsSTM");
+ getpkt (&rs->buf, &rs->buf_size, 0);
+ p = rs->buf;
+ }
+
+ do_cleanups (old_chain);
+ return markers;
+}
+
+\f
+/* Implement the to_get_ada_task_ptid function for the remote targets. */
+
+static ptid_t
+remote_get_ada_task_ptid (long lwp, long thread)
+{
+ return ptid_build (ptid_get_pid (inferior_ptid), 0, lwp);
+}
+\f
+
/* Restart the remote side; this is an extended protocol operation. */
static void
/* We don't have a connection to the remote stub anymore. Get rid
of all the inferiors and their threads we were controlling. */
discard_all_inferiors ();
+ inferior_ptid = null_ptid;
/* We're no longer interested in any of these events. */
discard_pending_stop_replies (-1);
int extended_p;
};
+/* Send interrupt_sequence to remote target. */
+static void
+send_interrupt_sequence ()
+{
+ if (interrupt_sequence_mode == interrupt_sequence_control_c)
+ serial_write (remote_desc, "\x03", 1);
+ else if (interrupt_sequence_mode == interrupt_sequence_break)
+ serial_send_break (remote_desc);
+ else if (interrupt_sequence_mode == interrupt_sequence_break_g)
+ {
+ serial_send_break (remote_desc);
+ serial_write (remote_desc, "g", 1);
+ }
+ else
+ internal_error (__FILE__, __LINE__,
+ _("Invalid value for interrupt_sequence_mode: %s."),
+ interrupt_sequence_mode);
+}
+
static void
remote_start_remote (struct ui_out *uiout, void *opaque)
{
/* Ack any packet which the remote side has already sent. */
serial_write (remote_desc, "+", 1);
+ if (interrupt_on_connect)
+ send_interrupt_sequence ();
+
/* The first packet we send to the target is the optional "supported
packets" request. If the target can answer this, it will tell us
which later probes to skip. */
remote_query_supported ();
+ /* If the stub wants to get a QAllow, compose one and send it. */
+ if (remote_protocol_packets[PACKET_QAllow].support != PACKET_DISABLE)
+ remote_set_permissions ();
+
/* Next, we possibly activate noack mode.
If the QStartNoAckMode packet configuration is set to AUTO,
this before anything involving memory or registers. */
target_find_description ();
+ /* Next, now that we know something about the target, update the
+ address spaces in the program spaces. */
+ update_address_spaces ();
+
/* On OSs where the list of libraries is global to all
processes, we fetch them early. */
if (gdbarch_has_global_solist (target_gdbarch))
/* In non-stop mode, any cached wait status will be stored in
the stop reply queue. */
gdb_assert (wait_status == NULL);
+
+ /* Update the remote on signals to silently pass, or more
+ importantly, which to not ignore, in case a previous session
+ had set some different set of signals to be ignored. */
+ remote_pass_signals ();
}
/* If we connected to a live target, do some additional setup. */
remote_check_symbols (symfile_objfile);
}
- /* If breakpoints are global, insert them now. */
+ /* Possibly the target has been engaged in a trace run started
+ previously; find out where things are at. */
+ if (remote_get_trace_status (current_trace_status ()) != -1)
+ {
+ struct uploaded_tp *uploaded_tps = NULL;
+ struct uploaded_tsv *uploaded_tsvs = NULL;
+
+ if (current_trace_status ()->running)
+ printf_filtered (_("Trace is already running on the target.\n"));
+
+ /* Get trace state variables first, they may be checked when
+ parsing uploaded commands. */
+
+ remote_upload_trace_state_variables (&uploaded_tsvs);
+
+ merge_uploaded_trace_state_variables (&uploaded_tsvs);
+
+ remote_upload_tracepoints (&uploaded_tps);
+
+ merge_uploaded_tracepoints (&uploaded_tps);
+ }
+
+ /* If breakpoints are global, insert them now. */
if (gdbarch_has_global_breakpoints (target_gdbarch)
&& breakpoints_always_inserted_mode ())
insert_breakpoints ();
init_all_packet_configs (void)
{
int i;
+
for (i = 0; i < PACKET_MAX; i++)
update_packet_config (&remote_protocol_packets[i]);
}
return serial_open (name);
}
+/* Inform the target of our permission settings. The permission flags
+ work without this, but if the target knows the settings, it can do
+ a couple things. First, it can add its own check, to catch cases
+ that somehow manage to get by the permissions checks in target
+ methods. Second, if the target is wired to disallow particular
+ settings (for instance, a system in the field that is not set up to
+ be able to stop at a breakpoint), it can object to any unavailable
+ permissions. */
+
+void
+remote_set_permissions (void)
+{
+ struct remote_state *rs = get_remote_state ();
+
+ sprintf (rs->buf, "QAllow:"
+ "WriteReg:%x;WriteMem:%x;"
+ "InsertBreak:%x;InsertTrace:%x;"
+ "InsertFastTrace:%x;Stop:%x",
+ may_write_registers, may_write_memory,
+ may_insert_breakpoints, may_insert_tracepoints,
+ may_insert_fast_tracepoints, may_stop);
+ putpkt (rs->buf);
+ getpkt (&rs->buf, &rs->buf_size, 0);
+
+ /* If the target didn't like the packet, warn the user. Do not try
+ to undo the user's settings, that would just be maddening. */
+ if (strcmp (rs->buf, "OK") != 0)
+ warning ("Remote refused setting permissions with: %s", rs->buf);
+}
+
/* This type describes each known response to the qSupported
packet. */
struct protocol_feature
enum packet_support support, const char *value)
{
struct remote_state *rs = get_remote_state ();
+
rs->multi_process_aware = (support == PACKET_ENABLE);
}
enum packet_support support, const char *value)
{
struct remote_state *rs = get_remote_state ();
+
rs->non_stop_aware = (support == PACKET_ENABLE);
}
const char *value)
{
struct remote_state *rs = get_remote_state ();
+
rs->cond_tracepoints = (support == PACKET_ENABLE);
}
+static void
+remote_fast_tracepoint_feature (const struct protocol_feature *feature,
+ enum packet_support support,
+ const char *value)
+{
+ struct remote_state *rs = get_remote_state ();
+
+ rs->fast_tracepoints = (support == PACKET_ENABLE);
+}
+
+static void
+remote_static_tracepoint_feature (const struct protocol_feature *feature,
+ enum packet_support support,
+ const char *value)
+{
+ struct remote_state *rs = get_remote_state ();
+
+ rs->static_tracepoints = (support == PACKET_ENABLE);
+}
+
+static void
+remote_disconnected_tracing_feature (const struct protocol_feature *feature,
+ enum packet_support support,
+ const char *value)
+{
+ struct remote_state *rs = get_remote_state ();
+
+ rs->disconnected_tracing = (support == PACKET_ENABLE);
+}
+
static struct protocol_feature remote_protocol_features[] = {
{ "PacketSize", PACKET_DISABLE, remote_packet_size, -1 },
{ "qXfer:auxv:read", PACKET_DISABLE, remote_supported_packet,
PACKET_qXfer_spu_write },
{ "qXfer:osdata:read", PACKET_DISABLE, remote_supported_packet,
PACKET_qXfer_osdata },
+ { "qXfer:threads:read", PACKET_DISABLE, remote_supported_packet,
+ PACKET_qXfer_threads },
{ "QPassSignals", PACKET_DISABLE, remote_supported_packet,
PACKET_QPassSignals },
{ "QStartNoAckMode", PACKET_DISABLE, remote_supported_packet,
PACKET_qXfer_siginfo_write },
{ "ConditionalTracepoints", PACKET_DISABLE, remote_cond_tracepoint_feature,
PACKET_ConditionalTracepoints },
+ { "FastTracepoints", PACKET_DISABLE, remote_fast_tracepoint_feature,
+ PACKET_FastTracepoints },
+ { "StaticTracepoints", PACKET_DISABLE, remote_static_tracepoint_feature,
+ PACKET_StaticTracepoints },
+ { "DisconnectedTracing", PACKET_DISABLE, remote_disconnected_tracing_feature,
+ -1 },
+ { "ReverseContinue", PACKET_DISABLE, remote_supported_packet,
+ PACKET_bc },
+ { "ReverseStep", PACKET_DISABLE, remote_supported_packet,
+ PACKET_bs },
+ { "TracepointSource", PACKET_DISABLE, remote_supported_packet,
+ PACKET_TracepointSource },
+ { "QAllow", PACKET_DISABLE, remote_supported_packet,
+ PACKET_QAllow },
};
+static char *remote_support_xml;
+
+/* Register string appended to "xmlRegisters=" in qSupported query. */
+
+void
+register_remote_support_xml (const char *xml)
+{
+#if defined(HAVE_LIBEXPAT)
+ if (remote_support_xml == NULL)
+ remote_support_xml = concat ("xmlRegisters=", xml, (char *) NULL);
+ else
+ {
+ char *copy = xstrdup (remote_support_xml + 13);
+ char *p = strtok (copy, ",");
+
+ do
+ {
+ if (strcmp (p, xml) == 0)
+ {
+ /* already there */
+ xfree (copy);
+ return;
+ }
+ }
+ while ((p = strtok (NULL, ",")) != NULL);
+ xfree (copy);
+
+ remote_support_xml = reconcat (remote_support_xml,
+ remote_support_xml, ",", xml,
+ (char *) NULL);
+ }
+#endif
+}
+
+static char *
+remote_query_supported_append (char *msg, const char *append)
+{
+ if (msg)
+ return reconcat (msg, msg, ";", append, (char *) NULL);
+ else
+ return xstrdup (append);
+}
+
static void
remote_query_supported (void)
{
rs->buf[0] = 0;
if (remote_protocol_packets[PACKET_qSupported].support != PACKET_DISABLE)
{
+ char *q = NULL;
+ struct cleanup *old_chain = make_cleanup (free_current_contents, &q);
+
if (rs->extended)
- putpkt ("qSupported:multiprocess+");
- else
- putpkt ("qSupported");
+ q = remote_query_supported_append (q, "multiprocess+");
+
+ if (remote_support_xml)
+ q = remote_query_supported_append (q, remote_support_xml);
+
+ q = remote_query_supported_append (q, "qRelocInsn+");
+
+ q = reconcat (q, "qSupported:", q, (char *) NULL);
+ putpkt (q);
+
+ do_cleanups (old_chain);
getpkt (&rs->buf, &rs->buf_size, 0);
rs->extended = extended_p;
rs->non_stop_aware = 0;
rs->waiting_for_stop_reply = 0;
+ rs->ctrlc_pending_p = 0;
general_thread = not_sent_ptid;
continue_thread = not_sent_ptid;
{
struct remote_state *rs = get_remote_state ();
int pid;
- char *dummy;
char *wait_status = NULL;
- if (!args)
- error_no_arg (_("process-id to attach"));
+ pid = parse_pid_to_attach (args);
- dummy = args;
- pid = strtol (args, &dummy, 0);
- /* Some targets don't set errno on errors, grrr! */
- if (pid == 0 && args == dummy)
- error (_("Illegal process-id: %s."), args);
+ /* Remote PID can be freely equal to getpid, do not check it here the same
+ way as in other targets. */
if (remote_protocol_packets[PACKET_vAttach].support == PACKET_DISABLE)
error (_("This target does not support attaching to a process"));
error (_("Attaching to %s failed"),
target_pid_to_str (pid_to_ptid (pid)));
- remote_add_inferior (pid, 1);
+ set_current_inferior (remote_add_inferior (pid, 1));
inferior_ptid = pid_to_ptid (pid);
error (_("Reply contains invalid hex digit %d"), a);
}
-static int
+int
hex2bin (const char *hex, gdb_byte *bin, int count)
{
int i;
return 'a' + nib - 10;
}
-static int
+int
bin2hex (const gdb_byte *bin, char *hex, int count)
{
int i;
+
/* May use a length, or a nul-terminated string as input. */
if (count == 0)
count = strlen ((char *) bin);
remote_pass_signals ();
/* The vCont packet doesn't need to specify threads via Hc. */
- if (remote_vcont_resume (ptid, step, siggnal))
- goto done;
+ /* No reverse support (yet) for vCont. */
+ if (execution_direction != EXEC_REVERSE)
+ if (remote_vcont_resume (ptid, step, siggnal))
+ goto done;
/* All other supported resume packets do use Hc, so set the continue
thread. */
if (info_verbose && siggnal != TARGET_SIGNAL_0)
warning (" - Can't pass signal %d to target in reverse: ignored.\n",
siggnal);
+
+ if (step
+ && remote_protocol_packets[PACKET_bs].support == PACKET_DISABLE)
+ error (_("Remote reverse-step not supported."));
+ if (!step
+ && remote_protocol_packets[PACKET_bc].support == PACKET_DISABLE)
+ error (_("Remote reverse-continue not supported."));
+
strcpy (buf, step ? "bs" : "bc");
}
else if (siggnal != TARGET_SIGNAL_0)
struct remote_state *rs = get_remote_state ();
char *p = rs->buf;
char *endp = rs->buf + get_remote_packet_size ();
- struct stop_reply *reply, *next;
if (remote_protocol_packets[PACKET_vCont].support == PACKET_SUPPORT_UNKNOWN)
remote_vcont_probe (rs);
{
struct remote_state *rs = get_remote_state ();
+ rs->ctrlc_pending_p = 1;
+
/* If the inferior is stopped already, but the core didn't know
about it yet, just ignore the request. The cached wait status
will be collected in remote_wait. */
if (rs->cached_wait_status)
return;
- /* Send a break or a ^C, depending on user preference. */
-
- if (remote_break)
- serial_send_break (remote_desc);
- else
- serial_write (remote_desc, "\003", 1);
+ /* Send interrupt_sequence to remote target. */
+ send_interrupt_sequence ();
}
/* This is the generic stop called via the target vector. When a target
remote_async_terminal_ours_p = 1;
}
-void
+static void
remote_console_output (char *msg)
{
char *p;
{
char tb[2];
char c = fromhex (p[0]) * 16 + fromhex (p[1]);
+
tb[0] = c;
tb[1] = 0;
fputs_unfiltered (tb, gdb_stdtarg);
int solibs_changed;
int replay_event;
+
+ int core;
};
/* The list of already fetched and acknowledged stop events. */
stop_reply_xmalloc (void)
{
struct stop_reply *r = XMALLOC (struct stop_reply);
+
r->next = NULL;
return r;
}
do_stop_reply_xfree (void *arg)
{
struct stop_reply *r = arg;
+
stop_reply_xfree (r);
}
static struct stop_reply *
queued_stop_reply (ptid_t ptid)
{
- struct stop_reply *it, *prev;
- struct stop_reply head;
-
- head.next = stop_reply_queue;
- prev = &head;
-
- it = head.next;
-
- if (!ptid_equal (ptid, minus_one_ptid))
- for (; it; prev = it, it = it->next)
- if (ptid_equal (ptid, it->ptid))
- break;
+ struct stop_reply *it;
+ struct stop_reply **it_link;
- if (it)
+ it = stop_reply_queue;
+ it_link = &stop_reply_queue;
+ while (it)
{
- prev->next = it->next;
- it->next = NULL;
- }
+ if (ptid_match (it->ptid, ptid))
+ {
+ *it_link = it->next;
+ it->next = NULL;
+ break;
+ }
- stop_reply_queue = head.next;
+ it_link = &it->next;
+ it = *it_link;
+ }
if (stop_reply_queue)
/* There's still at least an event left. */
event->replay_event = 0;
event->stopped_by_watchpoint_p = 0;
event->regcache = NULL;
+ event->core = -1;
switch (buf[0])
{
case 'T': /* Status with PC, SP, FP, ... */
- {
- gdb_byte regs[MAX_REGISTER_SIZE];
-
- /* Expedited reply, containing Signal, {regno, reg} repeat. */
- /* format is: 'Tssn...:r...;n...:r...;n...:r...;#cc', where
- ss = signal number
- n... = register number
- r... = register contents
- */
-
- p = &buf[3]; /* after Txx */
- while (*p)
- {
- char *p1;
- char *p_temp;
- int fieldsize;
- LONGEST pnum = 0;
+ /* Expedited reply, containing Signal, {regno, reg} repeat. */
+ /* format is: 'Tssn...:r...;n...:r...;n...:r...;#cc', where
+ ss = signal number
+ n... = register number
+ r... = register contents
+ */
+
+ p = &buf[3]; /* after Txx */
+ while (*p)
+ {
+ char *p1;
+ char *p_temp;
+ int fieldsize;
+ LONGEST pnum = 0;
- /* If the packet contains a register number, save it in
- pnum and set p1 to point to the character following it.
- Otherwise p1 points to p. */
+ /* If the packet contains a register number, save it in
+ pnum and set p1 to point to the character following it.
+ Otherwise p1 points to p. */
- /* If this packet is an awatch packet, don't parse the 'a'
- as a register number. */
+ /* If this packet is an awatch packet, don't parse the 'a'
+ as a register number. */
- if (strncmp (p, "awatch", strlen("awatch")) != 0)
- {
- /* Read the ``P'' register number. */
- pnum = strtol (p, &p_temp, 16);
- p1 = p_temp;
- }
- else
- p1 = p;
+ if (strncmp (p, "awatch", strlen("awatch")) != 0
+ && strncmp (p, "core", strlen ("core") != 0))
+ {
+ /* Read the ``P'' register number. */
+ pnum = strtol (p, &p_temp, 16);
+ p1 = p_temp;
+ }
+ else
+ p1 = p;
- if (p1 == p) /* No register number present here. */
- {
- p1 = strchr (p, ':');
- if (p1 == NULL)
- error (_("Malformed packet(a) (missing colon): %s\n\
+ if (p1 == p) /* No register number present here. */
+ {
+ p1 = strchr (p, ':');
+ if (p1 == NULL)
+ error (_("Malformed packet(a) (missing colon): %s\n\
Packet: '%s'\n"),
- p, buf);
- if (strncmp (p, "thread", p1 - p) == 0)
- event->ptid = read_ptid (++p1, &p);
- else if ((strncmp (p, "watch", p1 - p) == 0)
- || (strncmp (p, "rwatch", p1 - p) == 0)
- || (strncmp (p, "awatch", p1 - p) == 0))
- {
- event->stopped_by_watchpoint_p = 1;
- p = unpack_varlen_hex (++p1, &addr);
- event->watch_data_address = (CORE_ADDR) addr;
- }
- else if (strncmp (p, "library", p1 - p) == 0)
- {
- p1++;
- p_temp = p1;
- while (*p_temp && *p_temp != ';')
- p_temp++;
+ p, buf);
+ if (strncmp (p, "thread", p1 - p) == 0)
+ event->ptid = read_ptid (++p1, &p);
+ else if ((strncmp (p, "watch", p1 - p) == 0)
+ || (strncmp (p, "rwatch", p1 - p) == 0)
+ || (strncmp (p, "awatch", p1 - p) == 0))
+ {
+ event->stopped_by_watchpoint_p = 1;
+ p = unpack_varlen_hex (++p1, &addr);
+ event->watch_data_address = (CORE_ADDR) addr;
+ }
+ else if (strncmp (p, "library", p1 - p) == 0)
+ {
+ p1++;
+ p_temp = p1;
+ while (*p_temp && *p_temp != ';')
+ p_temp++;
- event->solibs_changed = 1;
+ event->solibs_changed = 1;
+ p = p_temp;
+ }
+ else if (strncmp (p, "replaylog", p1 - p) == 0)
+ {
+ /* NO_HISTORY event.
+ p1 will indicate "begin" or "end", but
+ it makes no difference for now, so ignore it. */
+ event->replay_event = 1;
+ p_temp = strchr (p1 + 1, ';');
+ if (p_temp)
p = p_temp;
- }
- else if (strncmp (p, "replaylog", p1 - p) == 0)
- {
- /* NO_HISTORY event.
- p1 will indicate "begin" or "end", but
- it makes no difference for now, so ignore it. */
- event->replay_event = 1;
- p_temp = strchr (p1 + 1, ';');
- if (p_temp)
- p = p_temp;
- }
- else
- {
- /* Silently skip unknown optional info. */
- p_temp = strchr (p1 + 1, ';');
- if (p_temp)
- p = p_temp;
- }
- }
- else
- {
- struct packet_reg *reg = packet_reg_from_pnum (rsa, pnum);
- cached_reg_t cached_reg;
+ }
+ else if (strncmp (p, "core", p1 - p) == 0)
+ {
+ ULONGEST c;
+
+ p = unpack_varlen_hex (++p1, &c);
+ event->core = c;
+ }
+ else
+ {
+ /* Silently skip unknown optional info. */
+ p_temp = strchr (p1 + 1, ';');
+ if (p_temp)
+ p = p_temp;
+ }
+ }
+ else
+ {
+ struct packet_reg *reg = packet_reg_from_pnum (rsa, pnum);
+ cached_reg_t cached_reg;
- p = p1;
+ p = p1;
- if (*p != ':')
- error (_("Malformed packet(b) (missing colon): %s\n\
+ if (*p != ':')
+ error (_("Malformed packet(b) (missing colon): %s\n\
Packet: '%s'\n"),
- p, buf);
- ++p;
+ p, buf);
+ ++p;
- if (reg == NULL)
- error (_("Remote sent bad register number %s: %s\n\
+ if (reg == NULL)
+ error (_("Remote sent bad register number %s: %s\n\
Packet: '%s'\n"),
- phex_nz (pnum, 0), p, buf);
+ hex_string (pnum), p, buf);
- cached_reg.num = reg->regnum;
+ cached_reg.num = reg->regnum;
- fieldsize = hex2bin (p, cached_reg.data,
- register_size (target_gdbarch,
- reg->regnum));
- p += 2 * fieldsize;
- if (fieldsize < register_size (target_gdbarch,
- reg->regnum))
- warning (_("Remote reply is too short: %s"), buf);
+ fieldsize = hex2bin (p, cached_reg.data,
+ register_size (target_gdbarch,
+ reg->regnum));
+ p += 2 * fieldsize;
+ if (fieldsize < register_size (target_gdbarch,
+ reg->regnum))
+ warning (_("Remote reply is too short: %s"), buf);
- VEC_safe_push (cached_reg_t, event->regcache, &cached_reg);
- }
+ VEC_safe_push (cached_reg_t, event->regcache, &cached_reg);
+ }
- if (*p != ';')
- error (_("Remote register badly formatted: %s\nhere: %s"),
- buf, p);
- ++p;
- }
- }
+ if (*p != ';')
+ error (_("Remote register badly formatted: %s\nhere: %s"),
+ buf, p);
+ ++p;
+ }
/* fall through */
case 'S': /* Old style status, just signal only. */
if (event->solibs_changed)
"process:", sizeof ("process:") - 1) == 0)
{
ULONGEST upid;
+
p += sizeof ("process:") - 1;
unpack_varlen_hex (p, &upid);
pid = upid;
remote_get_pending_stop_replies (void)
{
struct remote_state *rs = get_remote_state ();
- int ret;
if (pending_stop_reply)
{
remote_watch_data_address = stop_reply->watch_data_address;
remote_notice_new_inferior (ptid, 0);
+ demand_private_info (ptid)->core = stop_reply->core;
}
stop_reply_xfree (stop_reply);
remote_wait_ns (ptid_t ptid, struct target_waitstatus *status, int options)
{
struct remote_state *rs = get_remote_state ();
- struct remote_arch_state *rsa = get_remote_arch_state ();
- ptid_t event_ptid = null_ptid;
struct stop_reply *stop_reply;
int ret;
remote_wait_as (ptid_t ptid, struct target_waitstatus *status, int options)
{
struct remote_state *rs = get_remote_state ();
- struct remote_arch_state *rsa = get_remote_arch_state ();
ptid_t event_ptid = null_ptid;
- ULONGEST addr;
- int solibs_changed = 0;
- char *buf, *p;
+ char *buf;
struct stop_reply *stop_reply;
again:
/* We got something. */
rs->waiting_for_stop_reply = 0;
+ /* Assume that the target has acknowledged Ctrl-C unless we receive
+ an 'F' or 'O' packet. */
+ if (buf[0] != 'F' && buf[0] != 'O')
+ rs->ctrlc_pending_p = 0;
+
switch (buf[0])
{
case 'E': /* Error of some sort. */
status->value.sig = TARGET_SIGNAL_0;
break;
case 'F': /* File-I/O request. */
- remote_fileio_request (buf);
+ remote_fileio_request (buf, rs->ctrlc_pending_p);
+ rs->ctrlc_pending_p = 0;
break;
case 'T': case 'S': case 'X': case 'W':
{
case PACKET_UNKNOWN:
return 0;
case PACKET_ERROR:
- error (_("Could not fetch register \"%s\""),
- gdbarch_register_name (get_regcache_arch (regcache), reg->regnum));
+ error (_("Could not fetch register \"%s\"; remote failure reply '%s'"),
+ gdbarch_register_name (get_regcache_arch (regcache),
+ reg->regnum),
+ buf);
}
/* If this register is unfetchable, tell the regcache. */
send_g_packet (void)
{
struct remote_state *rs = get_remote_state ();
- int i, buf_len;
- char *p;
- char *regs;
+ int buf_len;
sprintf (rs->buf, "g");
remote_send (&rs->buf, &rs->buf_size);
p += 2;
}
- {
- int i;
- for (i = 0; i < gdbarch_num_regs (gdbarch); i++)
- {
- struct packet_reg *r = &rsa->regs[i];
- if (r->in_g_packet)
- {
- if (r->offset * 2 >= strlen (rs->buf))
- /* This shouldn't happen - we adjusted in_g_packet above. */
- internal_error (__FILE__, __LINE__,
- "unexpected end of 'g' packet reply");
- else if (rs->buf[r->offset * 2] == 'x')
- {
- gdb_assert (r->offset * 2 < strlen (rs->buf));
- /* The register isn't available, mark it as such (at
- the same time setting the value to zero). */
- regcache_raw_supply (regcache, r->regnum, NULL);
- }
- else
- regcache_raw_supply (regcache, r->regnum,
- regs + r->offset);
- }
- }
- }
+ for (i = 0; i < gdbarch_num_regs (gdbarch); i++)
+ {
+ struct packet_reg *r = &rsa->regs[i];
+
+ if (r->in_g_packet)
+ {
+ if (r->offset * 2 >= strlen (rs->buf))
+ /* This shouldn't happen - we adjusted in_g_packet above. */
+ internal_error (__FILE__, __LINE__,
+ "unexpected end of 'g' packet reply");
+ else if (rs->buf[r->offset * 2] == 'x')
+ {
+ gdb_assert (r->offset * 2 < strlen (rs->buf));
+ /* The register isn't available, mark it as such (at
+ the same time setting the value to zero). */
+ regcache_raw_supply (regcache, r->regnum, NULL);
+ }
+ else
+ regcache_raw_supply (regcache, r->regnum,
+ regs + r->offset);
+ }
+ }
}
static void
remote_fetch_registers (struct target_ops *ops,
struct regcache *regcache, int regnum)
{
- struct remote_state *rs = get_remote_state ();
struct remote_arch_state *rsa = get_remote_arch_state ();
int i;
if (regnum >= 0)
{
struct packet_reg *reg = packet_reg_from_regnum (rsa, regnum);
+
gdb_assert (reg != NULL);
/* If this register might be in the 'g' packet, try that first -
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct remote_state *rs = get_remote_state ();
- struct remote_arch_state *rsa = get_remote_arch_state ();
/* Try storing a single register. */
char *buf = rs->buf;
gdb_byte regp[MAX_REGISTER_SIZE];
case PACKET_OK:
return 1;
case PACKET_ERROR:
- error (_("Could not write register \"%s\""),
- gdbarch_register_name (gdbarch, reg->regnum));
+ error (_("Could not write register \"%s\"; remote failure reply '%s'"),
+ gdbarch_register_name (gdbarch, reg->regnum), rs->buf);
case PACKET_UNKNOWN:
return 0;
default:
local buffer. */
{
int i;
+
regs = alloca (rsa->sizeof_g_packet);
memset (regs, 0, rsa->sizeof_g_packet);
for (i = 0; i < gdbarch_num_regs (get_regcache_arch (regcache)); i++)
{
struct packet_reg *r = &rsa->regs[i];
+
if (r->in_g_packet)
regcache_raw_collect (regcache, r->regnum, regs + r->offset);
}
putpkt (rs->buf);
getpkt (&rs->buf, &rs->buf_size, 0);
if (packet_check_result (rs->buf) == PACKET_ERROR)
- error (_("Could not write registers"));
+ error (_("Could not write registers; remote failure reply '%s'"),
+ rs->buf);
}
/* Store register REGNUM, or all registers if REGNUM == -1, from the contents
remote_store_registers (struct target_ops *ops,
struct regcache *regcache, int regnum)
{
- struct remote_state *rs = get_remote_state ();
struct remote_arch_state *rsa = get_remote_arch_state ();
int i;
if (regnum >= 0)
{
struct packet_reg *reg = packet_reg_from_regnum (rsa, regnum);
+
gdb_assert (reg != NULL);
/* Always prefer to store registers using the 'P' packet if
hexnumstr (char *buf, ULONGEST num)
{
int len = hexnumlen (num);
+
return hexnumnstr (buf, num, len);
}
remote_address_masked (CORE_ADDR addr)
{
int address_size = remote_address_size;
+
/* If "remoteaddresssize" was not set, default to target address size. */
if (!address_size)
address_size = gdbarch_addr_bit (target_gdbarch);
/* Only create a mask when that mask can safely be constructed
in a ULONGEST variable. */
ULONGEST mask = 1;
+
mask = (mask << address_size) - 1;
addr &= mask;
}
if (strncmp (buf, "Stop:", 5) == 0)
{
if (pending_stop_reply)
- /* We've already parsed the in-flight stop-reply, but the stub
- for some reason thought we didn't, possibly due to timeout
- on its side. Just ignore it. */
- ;
+ {
+ /* We've already parsed the in-flight stop-reply, but the
+ stub for some reason thought we didn't, possibly due to
+ timeout on its side. Just ignore it. */
+ if (remote_debug)
+ fprintf_unfiltered (gdb_stdlog, "ignoring resent notification\n");
+ }
else
{
struct cleanup *old_chain;
struct stop_reply *reply = stop_reply_xmalloc ();
+
old_chain = make_cleanup (do_stop_reply_xfree, reply);
remote_parse_stop_reply (buf + 5, reply);
/* Notify the event loop there's a stop reply to acknowledge
and that there may be more events to fetch. */
mark_async_event_handler (remote_async_get_pending_events_token);
+
+ if (remote_debug)
+ fprintf_unfiltered (gdb_stdlog, "stop notification captured\n");
}
}
else
{
struct remote_state *rs = get_remote_state ();
int max_size = get_remote_packet_size ();
-
va_list ap;
+
va_start (ap, format);
rs->buf[0] = '\0';
restore_remote_timeout (void *p)
{
int value = *(int *)p;
+
remote_timeout = value;
}
int addr_size = gdbarch_addr_bit (target_gdbarch) / 8;
int saved_remote_timeout = remote_timeout;
enum packet_result ret;
-
struct cleanup *back_to = make_cleanup (restore_remote_timeout,
&saved_remote_timeout);
+
remote_timeout = remote_flash_timeout;
ret = remote_send_printf ("vFlashErase:%s,%s",
struct cleanup *old_chain;
struct ui_file *stb;
char *str;
- long length;
stb = mem_fileopen ();
old_chain = make_cleanup_ui_file_delete (stb);
fputstrn_unfiltered (buf, n, 0, stb);
- str = ui_file_xstrdup (stb, &length);
+ str = ui_file_xstrdup (stb, NULL);
do_cleanups (old_chain);
return str;
}
case '*': /* Run length encoding. */
{
int repeat;
- csum += c;
+ csum += c;
c = readchar (remote_timeout);
csum += c;
repeat = c - ' ' + 3; /* Compute repeat count. */
extended_remote_run (char *args)
{
struct remote_state *rs = get_remote_state ();
- char *p;
int len;
/* If the user has disabled vRun support, or we have detected that
extended_remote_restart ();
}
- /* Clean up from the last time we ran, before we mark the target
- running again. This will mark breakpoints uninserted, and
- get_offsets may insert breakpoints. */
- init_thread_list ();
- init_wait_for_inferior ();
+ if (!have_inferiors ())
+ {
+ /* Clean up from the last time we ran, before we mark the target
+ running again. This will mark breakpoints uninserted, and
+ get_offsets may insert breakpoints. */
+ init_thread_list ();
+ init_wait_for_inferior ();
+ }
/* Now mark the inferior as running before we do anything else. */
inferior_ptid = magic_null_ptid;
char *p;
int bpsize;
- gdbarch_breakpoint_from_pc (gdbarch, &addr, &bpsize);
+ gdbarch_remote_breakpoint_from_pc (gdbarch, &addr, &bpsize);
rs = get_remote_state ();
p = rs->buf;
{
CORE_ADDR addr = bp_tgt->placed_address;
struct remote_state *rs = get_remote_state ();
- int bp_size;
if (remote_protocol_packets[PACKET_Z0].support != PACKET_DISABLE)
{
}
static int
-remote_insert_watchpoint (CORE_ADDR addr, int len, int type)
+remote_insert_watchpoint (CORE_ADDR addr, int len, int type,
+ struct expression *cond)
{
struct remote_state *rs = get_remote_state ();
char *p;
enum Z_packet_type packet = watchpoint_to_Z_packet (type);
if (remote_protocol_packets[PACKET_Z0 + packet].support == PACKET_DISABLE)
- return -1;
+ return 1;
sprintf (rs->buf, "Z%x,", packet);
p = strchr (rs->buf, '\0');
switch (packet_ok (rs->buf, &remote_protocol_packets[PACKET_Z0 + packet]))
{
case PACKET_ERROR:
- case PACKET_UNKNOWN:
return -1;
+ case PACKET_UNKNOWN:
+ return 1;
case PACKET_OK:
return 0;
}
static int
-remote_remove_watchpoint (CORE_ADDR addr, int len, int type)
+remote_remove_watchpoint (CORE_ADDR addr, int len, int type,
+ struct expression *cond)
{
struct remote_state *rs = get_remote_state ();
char *p;
remote_stopped_data_address (struct target_ops *target, CORE_ADDR *addr_p)
{
int rc = 0;
+
if (remote_stopped_by_watchpoint ())
{
*addr_p = remote_watch_data_address;
/* The length field should be set to the size of a breakpoint
instruction, even though we aren't inserting one ourselves. */
- gdbarch_breakpoint_from_pc
+ gdbarch_remote_breakpoint_from_pc
(gdbarch, &bp_tgt->placed_address, &bp_tgt->placed_size);
if (remote_protocol_packets[PACKET_Z1].support == PACKET_DISABLE)
{0, 0};
static unsigned long
-crc32 (unsigned char *buf, int len, unsigned int crc)
+crc32 (const unsigned char *buf, int len, unsigned int crc)
{
if (!crc32_table[1])
{
return crc;
}
+/* Verify memory using the "qCRC:" request. */
+
+static int
+remote_verify_memory (struct target_ops *ops,
+ const gdb_byte *data, CORE_ADDR lma, ULONGEST size)
+{
+ struct remote_state *rs = get_remote_state ();
+ unsigned long host_crc, target_crc;
+ char *tmp;
+
+ /* FIXME: assumes lma can fit into long. */
+ xsnprintf (rs->buf, get_remote_packet_size (), "qCRC:%lx,%lx",
+ (long) lma, (long) size);
+ putpkt (rs->buf);
+
+ /* Be clever; compute the host_crc before waiting for target
+ reply. */
+ host_crc = crc32 (data, size, 0xffffffff);
+
+ getpkt (&rs->buf, &rs->buf_size, 0);
+ if (rs->buf[0] == 'E')
+ return -1;
+
+ if (rs->buf[0] != 'C')
+ error (_("remote target does not support this operation"));
+
+ for (target_crc = 0, tmp = &rs->buf[1]; *tmp; tmp++)
+ target_crc = target_crc * 16 + fromhex (*tmp);
+
+ return (host_crc == target_crc);
+}
+
/* compare-sections command
With no arguments, compares each loadable section in the exec bfd
with the same memory range on the target, and reports mismatches.
- Useful for verifying the image on the target against the exec file.
- Depends on the target understanding the new "qCRC:" request. */
-
-/* FIXME: cagney/1999-10-26: This command should be broken down into a
- target method (target verify memory) and generic version of the
- actual command. This will allow other high-level code (especially
- generic_load()) to make use of this target functionality. */
+ Useful for verifying the image on the target against the exec file. */
static void
compare_sections_command (char *args, int from_tty)
{
- struct remote_state *rs = get_remote_state ();
asection *s;
- unsigned long host_crc, target_crc;
struct cleanup *old_chain;
- char *tmp;
char *sectdata;
const char *sectname;
bfd_size_type size;
bfd_vma lma;
int matched = 0;
int mismatched = 0;
+ int res;
if (!exec_bfd)
error (_("command cannot be used without an exec file"));
- if (!current_target.to_shortname ||
- strcmp (current_target.to_shortname, "remote") != 0)
- error (_("command can only be used with remote target"));
for (s = exec_bfd->sections; s; s = s->next)
{
matched = 1; /* do this section */
lma = s->lma;
- /* FIXME: assumes lma can fit into long. */
- xsnprintf (rs->buf, get_remote_packet_size (), "qCRC:%lx,%lx",
- (long) lma, (long) size);
- putpkt (rs->buf);
- /* Be clever; compute the host_crc before waiting for target
- reply. */
sectdata = xmalloc (size);
old_chain = make_cleanup (xfree, sectdata);
bfd_get_section_contents (exec_bfd, s, sectdata, 0, size);
- host_crc = crc32 ((unsigned char *) sectdata, size, 0xffffffff);
- getpkt (&rs->buf, &rs->buf_size, 0);
- if (rs->buf[0] == 'E')
+ res = target_verify_memory (sectdata, lma, size);
+
+ if (res == -1)
error (_("target memory fault, section %s, range %s -- %s"), sectname,
paddress (target_gdbarch, lma),
paddress (target_gdbarch, lma + size));
- if (rs->buf[0] != 'C')
- error (_("remote target does not support this operation"));
-
- for (target_crc = 0, tmp = &rs->buf[1]; *tmp; tmp++)
- target_crc = target_crc * 16 + fromhex (*tmp);
printf_filtered ("Section %s, range %s -- %s: ", sectname,
paddress (target_gdbarch, lma),
paddress (target_gdbarch, lma + size));
- if (host_crc == target_crc)
+ if (res)
printf_filtered ("matched.\n");
else
{
{
int i, buf_len;
ULONGEST n;
- gdb_byte *wbuf;
struct remote_state *rs = get_remote_state ();
int max_size = get_memory_write_packet_size ();
static ULONGEST finished_offset;
struct remote_state *rs = get_remote_state ();
- unsigned int total = 0;
LONGEST i, n, packet_len;
if (packet->support == PACKET_DISABLE)
if (object == TARGET_OBJECT_MEMORY)
{
int xfered;
+
errno = 0;
/* If the remote target is connected but not running, we should
[PACKET_qXfer_siginfo_write]);
}
+ if (object == TARGET_OBJECT_STATIC_TRACE_DATA)
+ {
+ if (readbuf)
+ return remote_read_qxfer (ops, "statictrace", annex, readbuf, offset, len,
+ &remote_protocol_packets
+ [PACKET_qXfer_statictrace_read]);
+ else
+ return -1;
+ }
+
/* Only handle flash writes. */
if (writebuf != NULL)
{
(ops, "osdata", annex, readbuf, offset, len,
&remote_protocol_packets[PACKET_qXfer_osdata]);
+ case TARGET_OBJECT_THREADS:
+ gdb_assert (annex == NULL);
+ return remote_read_qxfer (ops, "threads", annex, readbuf, offset, len,
+ &remote_protocol_packets[PACKET_qXfer_threads]);
+
default:
return -1;
}
{
char *buf;
- /* XXX - see also tracepoint.c:remote_get_noisy_reply(). */
+ /* XXX - see also remote_get_noisy_reply(). */
rs->buf[0] = '\0';
getpkt (&rs->buf, &rs->buf_size, 0);
buf = rs->buf;
for (p = buf; p[0] != '\0' && p[1] != '\0'; p += 2)
{
char c = (fromhex (p[0]) << 4) + fromhex (p[1]);
+
fputc_unfiltered (c, outbuf);
}
break;
if (text)
{
struct cleanup *back_to = make_cleanup (xfree, text);
+
result = parse_memory_map (text);
do_cleanups (back_to);
}
static char buf[64];
struct remote_state *rs = get_remote_state ();
- if (ptid_equal (magic_null_ptid, ptid))
+ if (ptid_is_pid (ptid))
{
- xsnprintf (buf, sizeof buf, "Thread <main>");
- return buf;
- }
- else if (remote_multi_process_p (rs)
- && ptid_get_tid (ptid) != 0 && ptid_get_pid (ptid) != 0)
- {
- xsnprintf (buf, sizeof buf, "Thread %d.%ld",
- ptid_get_pid (ptid), ptid_get_tid (ptid));
- return buf;
+ /* Printing an inferior target id. */
+
+ /* When multi-process extensions are off, there's no way in the
+ remote protocol to know the remote process id, if there's any
+ at all. There's one exception --- when we're connected with
+ target extended-remote, and we manually attached to a process
+ with "attach PID". We don't record anywhere a flag that
+ allows us to distinguish that case from the case of
+ connecting with extended-remote and the stub already being
+ attached to a process, and reporting yes to qAttached, hence
+ no smart special casing here. */
+ if (!remote_multi_process_p (rs))
+ {
+ xsnprintf (buf, sizeof buf, "Remote target");
+ return buf;
+ }
+
+ return normal_pid_to_str (ptid);
}
- else if (ptid_get_tid (ptid) != 0)
+ else
{
- xsnprintf (buf, sizeof buf, "Thread %ld",
- ptid_get_tid (ptid));
+ if (ptid_equal (magic_null_ptid, ptid))
+ xsnprintf (buf, sizeof buf, "Thread <main>");
+ else if (remote_multi_process_p (rs))
+ xsnprintf (buf, sizeof buf, "Thread %d.%ld",
+ ptid_get_pid (ptid), ptid_get_tid (ptid));
+ else
+ xsnprintf (buf, sizeof buf, "Thread %ld",
+ ptid_get_tid (ptid));
return buf;
}
-
- return normal_pid_to_str (ptid);
}
/* Get the address of the thread local variable in OBJFILE which is
return 0;
}
+/* Provide thread local base, i.e. Thread Information Block address.
+ Returns 1 if ptid is found and thread_local_base is non zero. */
+
+int
+remote_get_tib_address (ptid_t ptid, CORE_ADDR *addr)
+{
+ if (remote_protocol_packets[PACKET_qGetTIBAddr].support != PACKET_DISABLE)
+ {
+ struct remote_state *rs = get_remote_state ();
+ char *p = rs->buf;
+ char *endp = rs->buf + get_remote_packet_size ();
+ enum packet_result result;
+
+ strcpy (p, "qGetTIBAddr:");
+ p += strlen (p);
+ p = write_ptid (p, endp, ptid);
+ *p++ = '\0';
+
+ putpkt (rs->buf);
+ getpkt (&rs->buf, &rs->buf_size, 0);
+ result = packet_ok (rs->buf,
+ &remote_protocol_packets[PACKET_qGetTIBAddr]);
+ if (result == PACKET_OK)
+ {
+ ULONGEST result;
+
+ unpack_varlen_hex (rs->buf, &result);
+ if (addr)
+ *addr = (CORE_ADDR) result;
+ return 1;
+ }
+ else if (result == PACKET_UNKNOWN)
+ error (_("Remote target doesn't support qGetTIBAddr packet"));
+ else
+ error (_("Remote target failed to process qGetTIBAddr request"));
+ }
+ else
+ error (_("qGetTIBAddr not supported or disabled on this target"));
+ /* Not reached. */
+ return 0;
+}
+
/* Support for inferring a target description based on the current
architecture and the size of a 'g' packet. While the 'g' packet
can have any size (since optional registers can be left off the
remote_file_get (const char *remote_file, const char *local_file, int from_tty)
{
struct cleanup *back_to, *close_cleanup;
- int retcode, fd, remote_errno, bytes, io_size;
+ int fd, remote_errno, bytes, io_size;
FILE *file;
gdb_byte *buffer;
ULONGEST offset;
help_list (remote_cmdlist, "remote ", -1, gdb_stdout);
}
-static int remote_target_can_reverse = 1;
-
static int
remote_can_execute_reverse (void)
{
- return remote_target_can_reverse;
+ if (remote_protocol_packets[PACKET_bs].support == PACKET_ENABLE
+ || remote_protocol_packets[PACKET_bc].support == PACKET_ENABLE)
+ return 1;
+ else
+ return 0;
}
static int
remote_supports_multi_process (void)
{
struct remote_state *rs = get_remote_state ();
+
return remote_multi_process_p (rs);
}
remote_supports_cond_tracepoints (void)
{
struct remote_state *rs = get_remote_state ();
+
return rs->cond_tracepoints;
}
+int
+remote_supports_fast_tracepoints (void)
+{
+ struct remote_state *rs = get_remote_state ();
+
+ return rs->fast_tracepoints;
+}
+
+static int
+remote_supports_static_tracepoints (void)
+{
+ struct remote_state *rs = get_remote_state ();
+
+ return rs->static_tracepoints;
+}
+
+static void
+remote_trace_init (void)
+{
+ putpkt ("QTinit");
+ remote_get_noisy_reply (&target_buf, &target_buf_size);
+ if (strcmp (target_buf, "OK") != 0)
+ error (_("Target does not support this command."));
+}
+
+static void free_actions_list (char **actions_list);
+static void free_actions_list_cleanup_wrapper (void *);
+static void
+free_actions_list_cleanup_wrapper (void *al)
+{
+ free_actions_list (al);
+}
+
+static void
+free_actions_list (char **actions_list)
+{
+ int ndx;
+
+ if (actions_list == 0)
+ return;
+
+ for (ndx = 0; actions_list[ndx]; ndx++)
+ xfree (actions_list[ndx]);
+
+ xfree (actions_list);
+}
+
+/* Recursive routine to walk through command list including loops, and
+ download packets for each command. */
+
+static void
+remote_download_command_source (int num, ULONGEST addr,
+ struct command_line *cmds)
+{
+ struct remote_state *rs = get_remote_state ();
+ struct command_line *cmd;
+
+ for (cmd = cmds; cmd; cmd = cmd->next)
+ {
+ QUIT; /* allow user to bail out with ^C */
+ strcpy (rs->buf, "QTDPsrc:");
+ encode_source_string (num, addr, "cmd", cmd->line,
+ rs->buf + strlen (rs->buf),
+ rs->buf_size - strlen (rs->buf));
+ putpkt (rs->buf);
+ remote_get_noisy_reply (&target_buf, &target_buf_size);
+ if (strcmp (target_buf, "OK"))
+ warning (_("Target does not support source download."));
+
+ if (cmd->control_type == while_control
+ || cmd->control_type == while_stepping_control)
+ {
+ remote_download_command_source (num, addr, *cmd->body_list);
+
+ QUIT; /* allow user to bail out with ^C */
+ strcpy (rs->buf, "QTDPsrc:");
+ encode_source_string (num, addr, "cmd", "end",
+ rs->buf + strlen (rs->buf),
+ rs->buf_size - strlen (rs->buf));
+ putpkt (rs->buf);
+ remote_get_noisy_reply (&target_buf, &target_buf_size);
+ if (strcmp (target_buf, "OK"))
+ warning (_("Target does not support source download."));
+ }
+ }
+}
+
+static void
+remote_download_tracepoint (struct breakpoint *t)
+{
+ struct bp_location *loc;
+ CORE_ADDR tpaddr;
+ char addrbuf[40];
+ char buf[2048];
+ char **tdp_actions;
+ char **stepping_actions;
+ int ndx;
+ struct cleanup *old_chain = NULL;
+ struct agent_expr *aexpr;
+ struct cleanup *aexpr_chain = NULL;
+ char *pkt;
+
+ /* Iterate over all the tracepoint locations. It's up to the target to
+ notice multiple tracepoint packets with the same number but different
+ addresses, and treat them as multiple locations. */
+ for (loc = t->loc; loc; loc = loc->next)
+ {
+ encode_actions (t, loc, &tdp_actions, &stepping_actions);
+ old_chain = make_cleanup (free_actions_list_cleanup_wrapper,
+ tdp_actions);
+ (void) make_cleanup (free_actions_list_cleanup_wrapper, stepping_actions);
+
+ tpaddr = loc->address;
+ sprintf_vma (addrbuf, tpaddr);
+ sprintf (buf, "QTDP:%x:%s:%c:%lx:%x", t->number,
+ addrbuf, /* address */
+ (t->enable_state == bp_enabled ? 'E' : 'D'),
+ t->step_count, t->pass_count);
+ /* Fast tracepoints are mostly handled by the target, but we can
+ tell the target how big of an instruction block should be moved
+ around. */
+ if (t->type == bp_fast_tracepoint)
+ {
+ /* Only test for support at download time; we may not know
+ target capabilities at definition time. */
+ if (remote_supports_fast_tracepoints ())
+ {
+ int isize;
+
+ if (gdbarch_fast_tracepoint_valid_at (target_gdbarch,
+ tpaddr, &isize, NULL))
+ sprintf (buf + strlen (buf), ":F%x", isize);
+ else
+ /* If it passed validation at definition but fails now,
+ something is very wrong. */
+ internal_error (__FILE__, __LINE__,
+ "Fast tracepoint not valid during download");
+ }
+ else
+ /* Fast tracepoints are functionally identical to regular
+ tracepoints, so don't take lack of support as a reason to
+ give up on the trace run. */
+ warning (_("Target does not support fast tracepoints, downloading %d as regular tracepoint"), t->number);
+ }
+ else if (t->type == bp_static_tracepoint)
+ {
+ /* Only test for support at download time; we may not know
+ target capabilities at definition time. */
+ if (remote_supports_static_tracepoints ())
+ {
+ struct static_tracepoint_marker marker;
+
+ if (target_static_tracepoint_marker_at (tpaddr, &marker))
+ strcat (buf, ":S");
+ else
+ error ("Static tracepoint not valid during download");
+ }
+ else
+ /* Fast tracepoints are functionally identical to regular
+ tracepoints, so don't take lack of support as a reason
+ to give up on the trace run. */
+ error (_("Target does not support static tracepoints"));
+ }
+ /* If the tracepoint has a conditional, make it into an agent
+ expression and append to the definition. */
+ if (loc->cond)
+ {
+ /* Only test support at download time, we may not know target
+ capabilities at definition time. */
+ if (remote_supports_cond_tracepoints ())
+ {
+ aexpr = gen_eval_for_expr (tpaddr, loc->cond);
+ aexpr_chain = make_cleanup_free_agent_expr (aexpr);
+ sprintf (buf + strlen (buf), ":X%x,", aexpr->len);
+ pkt = buf + strlen (buf);
+ for (ndx = 0; ndx < aexpr->len; ++ndx)
+ pkt = pack_hex_byte (pkt, aexpr->buf[ndx]);
+ *pkt = '\0';
+ do_cleanups (aexpr_chain);
+ }
+ else
+ warning (_("Target does not support conditional tracepoints, ignoring tp %d cond"), t->number);
+ }
+
+ if (t->commands || *default_collect)
+ strcat (buf, "-");
+ putpkt (buf);
+ remote_get_noisy_reply (&target_buf, &target_buf_size);
+ if (strcmp (target_buf, "OK"))
+ error (_("Target does not support tracepoints."));
+
+ /* do_single_steps (t); */
+ if (tdp_actions)
+ {
+ for (ndx = 0; tdp_actions[ndx]; ndx++)
+ {
+ QUIT; /* allow user to bail out with ^C */
+ sprintf (buf, "QTDP:-%x:%s:%s%c",
+ t->number, addrbuf, /* address */
+ tdp_actions[ndx],
+ ((tdp_actions[ndx + 1] || stepping_actions)
+ ? '-' : 0));
+ putpkt (buf);
+ remote_get_noisy_reply (&target_buf,
+ &target_buf_size);
+ if (strcmp (target_buf, "OK"))
+ error (_("Error on target while setting tracepoints."));
+ }
+ }
+ if (stepping_actions)
+ {
+ for (ndx = 0; stepping_actions[ndx]; ndx++)
+ {
+ QUIT; /* allow user to bail out with ^C */
+ sprintf (buf, "QTDP:-%x:%s:%s%s%s",
+ t->number, addrbuf, /* address */
+ ((ndx == 0) ? "S" : ""),
+ stepping_actions[ndx],
+ (stepping_actions[ndx + 1] ? "-" : ""));
+ putpkt (buf);
+ remote_get_noisy_reply (&target_buf,
+ &target_buf_size);
+ if (strcmp (target_buf, "OK"))
+ error (_("Error on target while setting tracepoints."));
+ }
+ }
+
+ if (remote_protocol_packets[PACKET_TracepointSource].support == PACKET_ENABLE)
+ {
+ if (t->addr_string)
+ {
+ strcpy (buf, "QTDPsrc:");
+ encode_source_string (t->number, loc->address,
+ "at", t->addr_string, buf + strlen (buf),
+ 2048 - strlen (buf));
+
+ putpkt (buf);
+ remote_get_noisy_reply (&target_buf, &target_buf_size);
+ if (strcmp (target_buf, "OK"))
+ warning (_("Target does not support source download."));
+ }
+ if (t->cond_string)
+ {
+ strcpy (buf, "QTDPsrc:");
+ encode_source_string (t->number, loc->address,
+ "cond", t->cond_string, buf + strlen (buf),
+ 2048 - strlen (buf));
+ putpkt (buf);
+ remote_get_noisy_reply (&target_buf, &target_buf_size);
+ if (strcmp (target_buf, "OK"))
+ warning (_("Target does not support source download."));
+ }
+ remote_download_command_source (t->number, loc->address,
+ breakpoint_commands (t));
+ }
+
+ do_cleanups (old_chain);
+ }
+}
+
+static void
+remote_download_trace_state_variable (struct trace_state_variable *tsv)
+{
+ struct remote_state *rs = get_remote_state ();
+ char *p;
+
+ sprintf (rs->buf, "QTDV:%x:%s:%x:",
+ tsv->number, phex ((ULONGEST) tsv->initial_value, 8), tsv->builtin);
+ p = rs->buf + strlen (rs->buf);
+ if ((p - rs->buf) + strlen (tsv->name) * 2 >= get_remote_packet_size ())
+ error (_("Trace state variable name too long for tsv definition packet"));
+ p += 2 * bin2hex ((gdb_byte *) (tsv->name), p, 0);
+ *p++ = '\0';
+ putpkt (rs->buf);
+ remote_get_noisy_reply (&target_buf, &target_buf_size);
+ if (*target_buf == '\0')
+ error (_("Target does not support this command."));
+ if (strcmp (target_buf, "OK") != 0)
+ error (_("Error on target while downloading trace state variable."));
+}
+
+static void
+remote_trace_set_readonly_regions (void)
+{
+ asection *s;
+ bfd_size_type size;
+ bfd_vma lma;
+ int anysecs = 0;
+
+ if (!exec_bfd)
+ return; /* No information to give. */
+
+ strcpy (target_buf, "QTro");
+ for (s = exec_bfd->sections; s; s = s->next)
+ {
+ char tmp1[40], tmp2[40];
+
+ if ((s->flags & SEC_LOAD) == 0 ||
+ /* (s->flags & SEC_CODE) == 0 || */
+ (s->flags & SEC_READONLY) == 0)
+ continue;
+
+ anysecs = 1;
+ lma = s->lma;
+ size = bfd_get_section_size (s);
+ sprintf_vma (tmp1, lma);
+ sprintf_vma (tmp2, lma + size);
+ sprintf (target_buf + strlen (target_buf),
+ ":%s,%s", tmp1, tmp2);
+ }
+ if (anysecs)
+ {
+ putpkt (target_buf);
+ getpkt (&target_buf, &target_buf_size, 0);
+ }
+}
+
+static void
+remote_trace_start (void)
+{
+ putpkt ("QTStart");
+ remote_get_noisy_reply (&target_buf, &target_buf_size);
+ if (*target_buf == '\0')
+ error (_("Target does not support this command."));
+ if (strcmp (target_buf, "OK") != 0)
+ error (_("Bogus reply from target: %s"), target_buf);
+}
+
+static int
+remote_get_trace_status (struct trace_status *ts)
+{
+ char *p;
+ /* FIXME we need to get register block size some other way */
+ extern int trace_regblock_size;
+
+ trace_regblock_size = get_remote_arch_state ()->sizeof_g_packet;
+
+ putpkt ("qTStatus");
+ p = remote_get_noisy_reply (&target_buf, &target_buf_size);
+
+ /* If the remote target doesn't do tracing, flag it. */
+ if (*p == '\0')
+ return -1;
+
+ /* We're working with a live target. */
+ ts->from_file = 0;
+
+ /* Set some defaults. */
+ ts->running_known = 0;
+ ts->stop_reason = trace_stop_reason_unknown;
+ ts->traceframe_count = -1;
+ ts->buffer_free = 0;
+
+ if (*p++ != 'T')
+ error (_("Bogus trace status reply from target: %s"), target_buf);
+
+ parse_trace_status (p, ts);
+
+ return ts->running;
+}
+
+static void
+remote_trace_stop (void)
+{
+ putpkt ("QTStop");
+ remote_get_noisy_reply (&target_buf, &target_buf_size);
+ if (*target_buf == '\0')
+ error (_("Target does not support this command."));
+ if (strcmp (target_buf, "OK") != 0)
+ error (_("Bogus reply from target: %s"), target_buf);
+}
+
+static int
+remote_trace_find (enum trace_find_type type, int num,
+ ULONGEST addr1, ULONGEST addr2,
+ int *tpp)
+{
+ struct remote_state *rs = get_remote_state ();
+ char *p, *reply;
+ int target_frameno = -1, target_tracept = -1;
+
+ p = rs->buf;
+ strcpy (p, "QTFrame:");
+ p = strchr (p, '\0');
+ switch (type)
+ {
+ case tfind_number:
+ sprintf (p, "%x", num);
+ break;
+ case tfind_pc:
+ sprintf (p, "pc:%s", phex_nz (addr1, 0));
+ break;
+ case tfind_tp:
+ sprintf (p, "tdp:%x", num);
+ break;
+ case tfind_range:
+ sprintf (p, "range:%s:%s", phex_nz (addr1, 0), phex_nz (addr2, 0));
+ break;
+ case tfind_outside:
+ sprintf (p, "outside:%s:%s", phex_nz (addr1, 0), phex_nz (addr2, 0));
+ break;
+ default:
+ error ("Unknown trace find type %d", type);
+ }
+
+ putpkt (rs->buf);
+ reply = remote_get_noisy_reply (&(rs->buf), &sizeof_pkt);
+ if (*reply == '\0')
+ error (_("Target does not support this command."));
+
+ while (reply && *reply)
+ switch (*reply)
+ {
+ case 'F':
+ p = ++reply;
+ target_frameno = (int) strtol (p, &reply, 16);
+ if (reply == p)
+ error (_("Unable to parse trace frame number"));
+ if (target_frameno == -1)
+ return -1;
+ break;
+ case 'T':
+ p = ++reply;
+ target_tracept = (int) strtol (p, &reply, 16);
+ if (reply == p)
+ error (_("Unable to parse tracepoint number"));
+ break;
+ case 'O': /* "OK"? */
+ if (reply[1] == 'K' && reply[2] == '\0')
+ reply += 2;
+ else
+ error (_("Bogus reply from target: %s"), reply);
+ break;
+ default:
+ error (_("Bogus reply from target: %s"), reply);
+ }
+ if (tpp)
+ *tpp = target_tracept;
+ return target_frameno;
+}
+
+static int
+remote_get_trace_state_variable_value (int tsvnum, LONGEST *val)
+{
+ struct remote_state *rs = get_remote_state ();
+ char *reply;
+ ULONGEST uval;
+
+ sprintf (rs->buf, "qTV:%x", tsvnum);
+ putpkt (rs->buf);
+ reply = remote_get_noisy_reply (&target_buf, &target_buf_size);
+ if (reply && *reply)
+ {
+ if (*reply == 'V')
+ {
+ unpack_varlen_hex (reply + 1, &uval);
+ *val = (LONGEST) uval;
+ return 1;
+ }
+ }
+ return 0;
+}
+
+static int
+remote_save_trace_data (const char *filename)
+{
+ struct remote_state *rs = get_remote_state ();
+ char *p, *reply;
+
+ p = rs->buf;
+ strcpy (p, "QTSave:");
+ p += strlen (p);
+ if ((p - rs->buf) + strlen (filename) * 2 >= get_remote_packet_size ())
+ error (_("Remote file name too long for trace save packet"));
+ p += 2 * bin2hex ((gdb_byte *) filename, p, 0);
+ *p++ = '\0';
+ putpkt (rs->buf);
+ reply = remote_get_noisy_reply (&target_buf, &target_buf_size);
+ if (*reply != '\0')
+ error (_("Target does not support this command."));
+ if (strcmp (reply, "OK") != 0)
+ error (_("Bogus reply from target: %s"), reply);
+ return 0;
+}
+
+/* This is basically a memory transfer, but needs to be its own packet
+ because we don't know how the target actually organizes its trace
+ memory, plus we want to be able to ask for as much as possible, but
+ not be unhappy if we don't get as much as we ask for. */
+
+static LONGEST
+remote_get_raw_trace_data (gdb_byte *buf, ULONGEST offset, LONGEST len)
+{
+ struct remote_state *rs = get_remote_state ();
+ char *reply;
+ char *p;
+ int rslt;
+
+ p = rs->buf;
+ strcpy (p, "qTBuffer:");
+ p += strlen (p);
+ p += hexnumstr (p, offset);
+ *p++ = ',';
+ p += hexnumstr (p, len);
+ *p++ = '\0';
+
+ putpkt (rs->buf);
+ reply = remote_get_noisy_reply (&target_buf, &target_buf_size);
+ if (reply && *reply)
+ {
+ /* 'l' by itself means we're at the end of the buffer and
+ there is nothing more to get. */
+ if (*reply == 'l')
+ return 0;
+
+ /* Convert the reply into binary. Limit the number of bytes to
+ convert according to our passed-in buffer size, rather than
+ what was returned in the packet; if the target is
+ unexpectedly generous and gives us a bigger reply than we
+ asked for, we don't want to crash. */
+ rslt = hex2bin (target_buf, buf, len);
+ return rslt;
+ }
+
+ /* Something went wrong, flag as an error. */
+ return -1;
+}
+
+static void
+remote_set_disconnected_tracing (int val)
+{
+ struct remote_state *rs = get_remote_state ();
+
+ if (rs->disconnected_tracing)
+ {
+ char *reply;
+
+ sprintf (rs->buf, "QTDisconnected:%x", val);
+ putpkt (rs->buf);
+ reply = remote_get_noisy_reply (&target_buf, &target_buf_size);
+ if (*reply == '\0')
+ error (_("Target does not support this command."));
+ if (strcmp (reply, "OK") != 0)
+ error (_("Bogus reply from target: %s"), reply);
+ }
+ else if (val)
+ warning (_("Target does not support disconnected tracing."));
+}
+
+static int
+remote_core_of_thread (struct target_ops *ops, ptid_t ptid)
+{
+ struct thread_info *info = find_thread_ptid (ptid);
+
+ if (info && info->private)
+ return info->private->core;
+ return -1;
+}
+
+static void
+remote_set_circular_trace_buffer (int val)
+{
+ struct remote_state *rs = get_remote_state ();
+ char *reply;
+
+ sprintf (rs->buf, "QTBuffer:circular:%x", val);
+ putpkt (rs->buf);
+ reply = remote_get_noisy_reply (&target_buf, &target_buf_size);
+ if (*reply == '\0')
+ error (_("Target does not support this command."));
+ if (strcmp (reply, "OK") != 0)
+ error (_("Bogus reply from target: %s"), reply);
+}
+
static void
init_remote_ops (void)
{
remote_ops.to_kill = remote_kill;
remote_ops.to_load = generic_load;
remote_ops.to_mourn_inferior = remote_mourn;
+ remote_ops.to_notice_signals = remote_notice_signals;
remote_ops.to_thread_alive = remote_thread_alive;
remote_ops.to_find_new_threads = remote_threads_info;
remote_ops.to_pid_to_str = remote_pid_to_str;
remote_ops.to_extra_thread_info = remote_threads_extra_info;
+ remote_ops.to_get_ada_task_ptid = remote_get_ada_task_ptid;
remote_ops.to_stop = remote_stop;
remote_ops.to_xfer_partial = remote_xfer_partial;
remote_ops.to_rcmd = remote_rcmd;
remote_ops.to_terminal_ours = remote_terminal_ours;
remote_ops.to_supports_non_stop = remote_supports_non_stop;
remote_ops.to_supports_multi_process = remote_supports_multi_process;
+ remote_ops.to_trace_init = remote_trace_init;
+ remote_ops.to_download_tracepoint = remote_download_tracepoint;
+ remote_ops.to_download_trace_state_variable = remote_download_trace_state_variable;
+ remote_ops.to_trace_set_readonly_regions = remote_trace_set_readonly_regions;
+ remote_ops.to_trace_start = remote_trace_start;
+ remote_ops.to_get_trace_status = remote_get_trace_status;
+ remote_ops.to_trace_stop = remote_trace_stop;
+ remote_ops.to_trace_find = remote_trace_find;
+ remote_ops.to_get_trace_state_variable_value = remote_get_trace_state_variable_value;
+ remote_ops.to_save_trace_data = remote_save_trace_data;
+ remote_ops.to_upload_tracepoints = remote_upload_tracepoints;
+ remote_ops.to_upload_trace_state_variables = remote_upload_trace_state_variables;
+ remote_ops.to_get_raw_trace_data = remote_get_raw_trace_data;
+ remote_ops.to_set_disconnected_tracing = remote_set_disconnected_tracing;
+ remote_ops.to_set_circular_trace_buffer = remote_set_circular_trace_buffer;
+ remote_ops.to_core_of_thread = remote_core_of_thread;
+ remote_ops.to_verify_memory = remote_verify_memory;
+ remote_ops.to_get_tib_address = remote_get_tib_address;
+ remote_ops.to_set_permissions = remote_set_permissions;
+ remote_ops.to_static_tracepoint_marker_at
+ = remote_static_tracepoint_marker_at;
+ remote_ops.to_static_tracepoint_markers_by_strid
+ = remote_static_tracepoint_markers_by_strid;
}
/* Set up the extended remote vector by making a copy of the standard
remote_async_mask (int new_mask)
{
int curr_mask = remote_async_mask_value;
+
remote_async_mask_value = new_mask;
return curr_mask;
}
{
struct cleanup *option_chain
= make_cleanup_ui_out_tuple_begin_end (uiout, "option");
+
ui_out_field_string (uiout, "name", list->name);
ui_out_text (uiout, ": ");
if (list->type == show_cmd)
remote_check_symbols (objfile);
}
+/* Pull all the tracepoints defined on the target and create local
+ data structures representing them. We don't want to create real
+ tracepoints yet, we don't want to mess up the user's existing
+ collection. */
+
+static int
+remote_upload_tracepoints (struct uploaded_tp **utpp)
+{
+ struct remote_state *rs = get_remote_state ();
+ char *p;
+
+ /* Ask for a first packet of tracepoint definition. */
+ putpkt ("qTfP");
+ getpkt (&rs->buf, &rs->buf_size, 0);
+ p = rs->buf;
+ while (*p && *p != 'l')
+ {
+ parse_tracepoint_definition (p, utpp);
+ /* Ask for another packet of tracepoint definition. */
+ putpkt ("qTsP");
+ getpkt (&rs->buf, &rs->buf_size, 0);
+ p = rs->buf;
+ }
+ return 0;
+}
+
+static int
+remote_upload_trace_state_variables (struct uploaded_tsv **utsvp)
+{
+ struct remote_state *rs = get_remote_state ();
+ char *p;
+
+ /* Ask for a first packet of variable definition. */
+ putpkt ("qTfV");
+ getpkt (&rs->buf, &rs->buf_size, 0);
+ p = rs->buf;
+ while (*p && *p != 'l')
+ {
+ parse_tsv_definition (p, utsvp);
+ /* Ask for another packet of variable definition. */
+ putpkt ("qTsV");
+ getpkt (&rs->buf, &rs->buf_size, 0);
+ p = rs->buf;
+ }
+ return 0;
+}
+
void
_initialize_remote (void)
{
struct remote_state *rs;
+ struct cmd_list_element *cmd;
+ char *cmd_name;
/* architecture specific data */
remote_gdbarch_data_handle =
Set whether to send break if interrupted."), _("\
Show whether to send break if interrupted."), _("\
If set, a break, instead of a cntrl-c, is sent to the remote target."),
- NULL, NULL, /* FIXME: i18n: Whether to send break if interrupted is %s. */
+ set_remotebreak, show_remotebreak,
&setlist, &showlist);
+ cmd_name = "remotebreak";
+ cmd = lookup_cmd (&cmd_name, setlist, "", -1, 1);
+ deprecate_cmd (cmd, "set remote interrupt-sequence");
+ cmd_name = "remotebreak"; /* needed because lookup_cmd updates the pointer */
+ cmd = lookup_cmd (&cmd_name, showlist, "", -1, 1);
+ deprecate_cmd (cmd, "show remote interrupt-sequence");
+
+ add_setshow_enum_cmd ("interrupt-sequence", class_support,
+ interrupt_sequence_modes, &interrupt_sequence_mode, _("\
+Set interrupt sequence to remote target."), _("\
+Show interrupt sequence to remote target."), _("\
+Valid value is \"Ctrl-C\", \"BREAK\" or \"BREAK-g\". The default is \"Ctrl-C\"."),
+ NULL, show_interrupt_sequence,
+ &remote_set_cmdlist,
+ &remote_show_cmdlist);
+
+ add_setshow_boolean_cmd ("interrupt-on-connect", class_support,
+ &interrupt_on_connect, _("\
+Set whether interrupt-sequence is sent to remote target when gdb connects to."), _(" \
+Show whether interrupt-sequence is sent to remote target when gdb connects to."), _(" \
+If set, interrupt sequence is sent to remote target."),
+ NULL, NULL,
+ &remote_set_cmdlist, &remote_show_cmdlist);
/* Install commands for configuring memory read/write packets. */
add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_osdata],
"qXfer:osdata:read", "osdata", 0);
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_threads],
+ "qXfer:threads:read", "threads", 0);
+
add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_siginfo_read],
"qXfer:siginfo:read", "read-siginfo-object", 0);
"qGetTLSAddr", "get-thread-local-storage-address",
0);
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_qGetTIBAddr],
+ "qGetTIBAddr", "get-thread-information-block-address",
+ 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_bc],
+ "bc", "reverse-continue", 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_bs],
+ "bs", "reverse-step", 0);
+
add_packet_config_cmd (&remote_protocol_packets[PACKET_qSupported],
"qSupported", "supported-packets", 0);
add_packet_config_cmd (&remote_protocol_packets[PACKET_ConditionalTracepoints],
"ConditionalTracepoints", "conditional-tracepoints", 0);
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_FastTracepoints],
+ "FastTracepoints", "fast-tracepoints", 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_TracepointSource],
+ "TracepointSource", "TracepointSource", 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_QAllow],
+ "QAllow", "allow", 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_StaticTracepoints],
+ "StaticTracepoints", "static-tracepoints", 0);
+
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_qXfer_statictrace_read],
+ "qXfer:statictrace:read", "read-sdata-object", 0);
/* Keep the old ``set remote Z-packet ...'' working. Each individual
Z sub-packet has its own set and show commands, but users may
magic_null_ptid = ptid_build (42000, 1, -1);
not_sent_ptid = ptid_build (42000, 1, -2);
any_thread_ptid = ptid_build (42000, 1, 0);
+
+ target_buf_size = 2048;
+ target_buf = xmalloc (target_buf_size);
}
+
projects / deliverable / binutils-gdb.git / blobdiff