packets. */
char *buf;
long buf_size;
+
+ /* If we negotiated packet size explicitly (and thus can bypass
+ heuristics for the largest packet size that will not overflow
+ a buffer in the stub), this will be set to that packet size.
+ Otherwise zero, meaning to use the guessed size. */
+ long explicit_packet_size;
};
/* This data could be associated with a target, but we do not always
static long
get_remote_packet_size (void)
{
+ struct remote_state *rs = get_remote_state ();
struct remote_arch_state *rsa = get_remote_arch_state ();
+ if (rs->explicit_packet_size)
+ return rs->explicit_packet_size;
+
return rsa->remote_packet_size;
}
if (config->size > 0
&& what_they_get > config->size)
what_they_get = config->size;
- /* Limit it to the size of the targets ``g'' response. */
- if ((rsa->actual_register_packet_size) > 0
- && what_they_get > (rsa->actual_register_packet_size))
- what_they_get = (rsa->actual_register_packet_size);
+
+ /* Limit it to the size of the targets ``g'' response unless we have
+ permission from the stub to use a larger packet size. */
+ if (rs->explicit_packet_size == 0
+ && rsa->actual_register_packet_size > 0
+ && what_they_get > rsa->actual_register_packet_size)
+ what_they_get = rsa->actual_register_packet_size;
}
if (what_they_get > MAX_REMOTE_PACKET_SIZE)
what_they_get = MAX_REMOTE_PACKET_SIZE;
PACKET_Z4,
PACKET_qPart_auxv,
PACKET_qGetTLSAddr,
+ PACKET_qSupported,
PACKET_MAX
};
return serial_open (name);
}
+/* This type describes each known response to the qSupported
+ packet. */
+struct protocol_feature
+{
+ /* The name of this protocol feature. */
+ const char *name;
+
+ /* The default for this protocol feature. */
+ enum packet_support default_support;
+
+ /* The function to call when this feature is reported, or after
+ qSupported processing if the feature is not supported.
+ The first argument points to this structure. The second
+ argument indicates whether the packet requested support be
+ enabled, disabled, or probed (or the default, if this function
+ is being called at the end of processing and this feature was
+ not reported). The third argument may be NULL; if not NULL, it
+ is a NUL-terminated string taken from the packet following
+ this feature's name and an equals sign. */
+ void (*func) (const struct protocol_feature *, enum packet_support,
+ const char *);
+
+ /* The corresponding packet for this feature. Only used if
+ FUNC is remote_supported_packet. */
+ int packet;
+};
+
+#if 0
+static void
+remote_supported_packet (const struct protocol_feature *feature,
+ enum packet_support support,
+ const char *argument)
+{
+ if (argument)
+ {
+ warning (_("Remote qSupported response supplied an unexpected value for"
+ " \"%s\"."), feature->name);
+ return;
+ }
+
+ if (remote_protocol_packets[feature->packet].support
+ == PACKET_SUPPORT_UNKNOWN)
+ remote_protocol_packets[feature->packet].support = support;
+}
+#endif
+
+static void
+remote_packet_size (const struct protocol_feature *feature,
+ enum packet_support support, const char *value)
+{
+ struct remote_state *rs = get_remote_state ();
+
+ int packet_size;
+ char *value_end;
+
+ if (support != PACKET_ENABLE)
+ return;
+
+ if (value == NULL || *value == '\0')
+ {
+ warning (_("Remote target reported \"%s\" without a size."),
+ feature->name);
+ return;
+ }
+
+ errno = 0;
+ packet_size = strtol (value, &value_end, 16);
+ if (errno != 0 || *value_end != '\0' || packet_size < 0)
+ {
+ warning (_("Remote target reported \"%s\" with a bad size: \"%s\"."),
+ feature->name, value);
+ return;
+ }
+
+ if (packet_size > MAX_REMOTE_PACKET_SIZE)
+ {
+ warning (_("limiting remote suggested packet size (%d bytes) to %d"),
+ packet_size, MAX_REMOTE_PACKET_SIZE);
+ packet_size = MAX_REMOTE_PACKET_SIZE;
+ }
+
+ /* Record the new maximum packet size. */
+ rs->explicit_packet_size = packet_size;
+}
+
+static struct protocol_feature remote_protocol_features[] = {
+ { "PacketSize", PACKET_DISABLE, remote_packet_size, -1 }
+};
+
+static void
+remote_query_supported (void)
+{
+ struct remote_state *rs = get_remote_state ();
+ char *next;
+ int i;
+ unsigned char seen [ARRAY_SIZE (remote_protocol_features)];
+
+ /* The packet support flags are handled differently for this packet
+ than for most others. We treat an error, a disabled packet, and
+ an empty response identically: any features which must be reported
+ to be used will be automatically disabled. An empty buffer
+ accomplishes this, since that is also the representation for a list
+ containing no features. */
+
+ rs->buf[0] = 0;
+ if (remote_protocol_packets[PACKET_qSupported].support != PACKET_DISABLE)
+ {
+ putpkt ("qSupported");
+ getpkt (&rs->buf, &rs->buf_size, 0);
+
+ /* If an error occured, warn, but do not return - just reset the
+ buffer to empty and go on to disable features. */
+ if (packet_ok (rs->buf, &remote_protocol_packets[PACKET_qSupported])
+ == PACKET_ERROR)
+ {
+ warning (_("Remote failure reply: %s"), rs->buf);
+ rs->buf[0] = 0;
+ }
+ }
+
+ memset (seen, 0, sizeof (seen));
+
+ next = rs->buf;
+ while (*next)
+ {
+ enum packet_support is_supported;
+ char *p, *end, *name_end, *value;
+
+ /* First separate out this item from the rest of the packet. If
+ there's another item after this, we overwrite the separator
+ (terminated strings are much easier to work with). */
+ p = next;
+ end = strchr (p, ';');
+ if (end == NULL)
+ {
+ end = p + strlen (p);
+ next = end;
+ }
+ else
+ {
+ if (end == p)
+ {
+ warning (_("empty item in \"qSupported\" response"));
+ continue;
+ }
+
+ *end = '\0';
+ next = end + 1;
+ }
+
+ name_end = strchr (p, '=');
+ if (name_end)
+ {
+ /* This is a name=value entry. */
+ is_supported = PACKET_ENABLE;
+ value = name_end + 1;
+ *name_end = '\0';
+ }
+ else
+ {
+ value = NULL;
+ switch (end[-1])
+ {
+ case '+':
+ is_supported = PACKET_ENABLE;
+ break;
+
+ case '-':
+ is_supported = PACKET_DISABLE;
+ break;
+
+ case '?':
+ is_supported = PACKET_SUPPORT_UNKNOWN;
+ break;
+
+ default:
+ warning (_("unrecognized item \"%s\" in \"qSupported\" response"), p);
+ continue;
+ }
+ end[-1] = '\0';
+ }
+
+ for (i = 0; i < ARRAY_SIZE (remote_protocol_features); i++)
+ if (strcmp (remote_protocol_features[i].name, p) == 0)
+ {
+ const struct protocol_feature *feature;
+
+ seen[i] = 1;
+ feature = &remote_protocol_features[i];
+ feature->func (feature, is_supported, value);
+ break;
+ }
+ }
+
+ /* If we increased the packet size, make sure to increase the global
+ buffer size also. We delay this until after parsing the entire
+ qSupported packet, because this is the same buffer we were
+ parsing. */
+ if (rs->buf_size < rs->explicit_packet_size)
+ {
+ rs->buf_size = rs->explicit_packet_size;
+ rs->buf = xrealloc (rs->buf, rs->buf_size);
+ }
+
+ /* Handle the defaults for unmentioned features. */
+ for (i = 0; i < ARRAY_SIZE (remote_protocol_features); i++)
+ if (!seen[i])
+ {
+ const struct protocol_feature *feature;
+
+ feature = &remote_protocol_features[i];
+ feature->func (feature, feature->default_support, NULL);
+ }
+}
+
+
static void
remote_open_1 (char *name, int from_tty, struct target_ops *target,
int extended_p, int async_p)
}
push_target (target); /* Switch to using remote target now. */
+ /* Reset the target state; these things will be queried either by
+ remote_query_supported or as they are needed. */
init_all_packet_configs ();
+ rs->explicit_packet_size = 0;
general_thread = -2;
continue_thread = -2;
use_threadinfo_query = 1;
use_threadextra_query = 1;
+ /* The first packet we send to the target is the optional "supported
+ packets" request. If the target can answer this, it will tell us
+ which later probes to skip. */
+ remote_query_supported ();
+
/* Without this, some commands which require an active target (such
as kill) won't work. This variable serves (at least) double duty
as both the pid of the target process (if it has such), and as a
"qGetTLSAddr", "get-thread-local-storage-address",
0);
+ add_packet_config_cmd (&remote_protocol_packets[PACKET_qSupported],
+ "qSupported", "supported-packets", 0);
+
/* Keep the old ``set remote Z-packet ...'' working. Each individual
Z sub-packet has its own set and show commands, but users may
have sets to this variable in their .gdbinit files (or in their
projects / deliverable / binutils-gdb.git / blobdiff