#include "parser-defs.h"
#include "osabi.h"
#include "infcall.h"
+#include "sim-regno.h"
+#include "gdb/sim-ppc.h"
+#include "reggroups.h"
#include "libbfd.h" /* for bfd_default_set_arch_mach */
#include "coff/internal.h" /* for libcoff.h */
unsigned char sz64; /* size on 64-bit arch, 0 if nonextant */
unsigned char fpr; /* whether register is floating-point */
unsigned char pseudo; /* whether register is pseudo */
+ int spr_num; /* PowerPC SPR number, or -1 if not an SPR.
+ This is an ISA SPR number, not a GDB
+ register number. */
};
/* Breakpoint shadows for the single step instructions will be kept here. */
&& tdep->ppc_ev0_regnum <= regno && regno <= tdep->ppc_ev31_regnum)
return 1;
+ /* Is it a reference to one of the raw upper GPR halves? */
+ if (tdep->ppc_ev0_upper_regnum >= 0
+ && tdep->ppc_ev0_upper_regnum <= regno
+ && regno < tdep->ppc_ev0_upper_regnum + ppc_num_gprs)
+ return 1;
+
/* Is it a reference to the 64-bit accumulator, and do we have that? */
if (tdep->ppc_acc_regnum >= 0
&& tdep->ppc_acc_regnum == regno)
return (tdep->ppc_fp0_regnum >= 0
&& tdep->ppc_fpscr_regnum >= 0);
}
+
+
+/* Check that TABLE[GDB_REGNO] is not already initialized, and then
+ set it to SIM_REGNO.
+
+ This is a helper function for init_sim_regno_table, constructing
+ the table mapping GDB register numbers to sim register numbers; we
+ initialize every element in that table to -1 before we start
+ filling it in. */
+static void
+set_sim_regno (int *table, int gdb_regno, int sim_regno)
+{
+ /* Make sure we don't try to assign any given GDB register a sim
+ register number more than once. */
+ gdb_assert (table[gdb_regno] == -1);
+ table[gdb_regno] = sim_regno;
+}
+
+
+/* Initialize ARCH->tdep->sim_regno, the table mapping GDB register
+ numbers to simulator register numbers, based on the values placed
+ in the ARCH->tdep->ppc_foo_regnum members. */
+static void
+init_sim_regno_table (struct gdbarch *arch)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (arch);
+ int total_regs = gdbarch_num_regs (arch) + gdbarch_num_pseudo_regs (arch);
+ const struct reg *regs = tdep->regs;
+ int *sim_regno = GDBARCH_OBSTACK_CALLOC (arch, total_regs, int);
+ int i;
+
+ /* Presume that all registers not explicitly mentioned below are
+ unavailable from the sim. */
+ for (i = 0; i < total_regs; i++)
+ sim_regno[i] = -1;
+
+ /* General-purpose registers. */
+ for (i = 0; i < ppc_num_gprs; i++)
+ set_sim_regno (sim_regno, tdep->ppc_gp0_regnum + i, sim_ppc_r0_regnum + i);
+
+ /* Floating-point registers. */
+ if (tdep->ppc_fp0_regnum >= 0)
+ for (i = 0; i < ppc_num_fprs; i++)
+ set_sim_regno (sim_regno,
+ tdep->ppc_fp0_regnum + i,
+ sim_ppc_f0_regnum + i);
+ if (tdep->ppc_fpscr_regnum >= 0)
+ set_sim_regno (sim_regno, tdep->ppc_fpscr_regnum, sim_ppc_fpscr_regnum);
+
+ set_sim_regno (sim_regno, gdbarch_pc_regnum (arch), sim_ppc_pc_regnum);
+ set_sim_regno (sim_regno, tdep->ppc_ps_regnum, sim_ppc_ps_regnum);
+ set_sim_regno (sim_regno, tdep->ppc_cr_regnum, sim_ppc_cr_regnum);
+
+ /* Segment registers. */
+ if (tdep->ppc_sr0_regnum >= 0)
+ for (i = 0; i < ppc_num_srs; i++)
+ set_sim_regno (sim_regno,
+ tdep->ppc_sr0_regnum + i,
+ sim_ppc_sr0_regnum + i);
+
+ /* Altivec registers. */
+ if (tdep->ppc_vr0_regnum >= 0)
+ {
+ for (i = 0; i < ppc_num_vrs; i++)
+ set_sim_regno (sim_regno,
+ tdep->ppc_vr0_regnum + i,
+ sim_ppc_vr0_regnum + i);
+
+ /* FIXME: jimb/2004-07-15: when we have tdep->ppc_vscr_regnum,
+ we can treat this more like the other cases. */
+ set_sim_regno (sim_regno,
+ tdep->ppc_vr0_regnum + ppc_num_vrs,
+ sim_ppc_vscr_regnum);
+ }
+ /* vsave is a special-purpose register, so the code below handles it. */
+
+ /* SPE APU (E500) registers. */
+ if (tdep->ppc_ev0_regnum >= 0)
+ for (i = 0; i < ppc_num_gprs; i++)
+ set_sim_regno (sim_regno,
+ tdep->ppc_ev0_regnum + i,
+ sim_ppc_ev0_regnum + i);
+ if (tdep->ppc_ev0_upper_regnum >= 0)
+ for (i = 0; i < ppc_num_gprs; i++)
+ set_sim_regno (sim_regno,
+ tdep->ppc_ev0_upper_regnum + i,
+ sim_ppc_rh0_regnum + i);
+ if (tdep->ppc_acc_regnum >= 0)
+ set_sim_regno (sim_regno, tdep->ppc_acc_regnum, sim_ppc_acc_regnum);
+ /* spefscr is a special-purpose register, so the code below handles it. */
+
+ /* Now handle all special-purpose registers. Verify that they
+ haven't mistakenly been assigned numbers by any of the above
+ code). */
+ for (i = 0; i < total_regs; i++)
+ if (regs[i].spr_num >= 0)
+ set_sim_regno (sim_regno, i, regs[i].spr_num + sim_ppc_spr0_regnum);
+
+ /* Drop the initialized array into place. */
+ tdep->sim_regno = sim_regno;
+}
+
+
+/* Given a GDB register number REG, return the corresponding SIM
+ register number. */
+static int
+rs6000_register_sim_regno (int reg)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+ int sim_regno;
+
+ gdb_assert (0 <= reg && reg <= NUM_REGS + NUM_PSEUDO_REGS);
+ sim_regno = tdep->sim_regno[reg];
+
+ if (sim_regno >= 0)
+ return sim_regno;
+ else
+ return LEGACY_SIM_REGNO_IGNORE;
+}
+
\f
/* Register set support functions. */
for (argno = 0, argbytes = 0; argno < nargs && ii < 8; ++ii)
{
- int reg_size = DEPRECATED_REGISTER_RAW_SIZE (ii + 3);
+ int reg_size = register_size (current_gdbarch, ii + 3);
arg = args[argno];
type = check_typedef (VALUE_TYPE (arg));
{
/* return value is copied starting from r3. */
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG
- && TYPE_LENGTH (valtype) < DEPRECATED_REGISTER_RAW_SIZE (3))
- offset = DEPRECATED_REGISTER_RAW_SIZE (3) - TYPE_LENGTH (valtype);
+ && TYPE_LENGTH (valtype) < register_size (current_gdbarch, 3))
+ offset = register_size (current_gdbarch, 3) - TYPE_LENGTH (valtype);
memcpy (valbuf,
regbuf + DEPRECATED_REGISTER_BYTE (3) + offset,
put_frame_register (frame, regnum, to);
}
+/* Move SPE vector register values between a 64-bit buffer and the two
+ 32-bit raw register halves in a regcache. This function handles
+ both splitting a 64-bit value into two 32-bit halves, and joining
+ two halves into a whole 64-bit value, depending on the function
+ passed as the MOVE argument.
+
+ EV_REG must be the number of an SPE evN vector register --- a
+ pseudoregister. REGCACHE must be a regcache, and BUFFER must be a
+ 64-bit buffer.
+
+ Call MOVE once for each 32-bit half of that register, passing
+ REGCACHE, the number of the raw register corresponding to that
+ half, and the address of the appropriate half of BUFFER.
+
+ For example, passing 'regcache_raw_read' as the MOVE function will
+ fill BUFFER with the full 64-bit contents of EV_REG. Or, passing
+ 'regcache_raw_supply' will supply the contents of BUFFER to the
+ appropriate pair of raw registers in REGCACHE.
+
+ You may need to cast away some 'const' qualifiers when passing
+ MOVE, since this function can't tell at compile-time which of
+ REGCACHE or BUFFER is acting as the source of the data. If C had
+ co-variant type qualifiers, ... */
+static void
+e500_move_ev_register (void (*move) (struct regcache *regcache,
+ int regnum, void *buf),
+ struct regcache *regcache, int ev_reg,
+ void *buffer)
+{
+ struct gdbarch *arch = get_regcache_arch (regcache);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (arch);
+ int reg_index;
+ char *byte_buffer = buffer;
+
+ gdb_assert (tdep->ppc_ev0_regnum <= ev_reg
+ && ev_reg < tdep->ppc_ev0_regnum + ppc_num_gprs);
+
+ reg_index = ev_reg - tdep->ppc_ev0_regnum;
+
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ {
+ move (regcache, tdep->ppc_ev0_upper_regnum + reg_index, byte_buffer);
+ move (regcache, tdep->ppc_gp0_regnum + reg_index, byte_buffer + 4);
+ }
+ else
+ {
+ move (regcache, tdep->ppc_gp0_regnum + reg_index, byte_buffer);
+ move (regcache, tdep->ppc_ev0_upper_regnum + reg_index, byte_buffer + 4);
+ }
+}
+
static void
e500_pseudo_register_read (struct gdbarch *gdbarch, struct regcache *regcache,
int reg_nr, void *buffer)
{
- int base_regnum;
- int offset = 0;
- char temp_buffer[MAX_REGISTER_SIZE];
+ struct gdbarch *regcache_arch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
- if (reg_nr >= tdep->ppc_gp0_regnum
- && reg_nr < tdep->ppc_gp0_regnum + ppc_num_gprs)
- {
- base_regnum = reg_nr - tdep->ppc_gp0_regnum + tdep->ppc_ev0_regnum;
-
- /* Build the value in the provided buffer. */
- /* Read the raw register of which this one is the lower portion. */
- regcache_raw_read (regcache, base_regnum, temp_buffer);
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
- offset = 4;
- memcpy ((char *) buffer, temp_buffer + offset, 4);
- }
+ gdb_assert (regcache_arch == gdbarch);
+
+ if (tdep->ppc_ev0_regnum <= reg_nr
+ && reg_nr < tdep->ppc_ev0_regnum + ppc_num_gprs)
+ e500_move_ev_register (regcache_raw_read, regcache, reg_nr, buffer);
+ else
+ internal_error (__FILE__, __LINE__,
+ "e500_pseudo_register_read: "
+ "called on unexpected register '%s' (%d)",
+ gdbarch_register_name (gdbarch, reg_nr), reg_nr);
}
static void
e500_pseudo_register_write (struct gdbarch *gdbarch, struct regcache *regcache,
int reg_nr, const void *buffer)
{
- int base_regnum;
- int offset = 0;
- char temp_buffer[MAX_REGISTER_SIZE];
+ struct gdbarch *regcache_arch = get_regcache_arch (regcache);
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
- if (reg_nr >= tdep->ppc_gp0_regnum
- && reg_nr < tdep->ppc_gp0_regnum + ppc_num_gprs)
- {
- base_regnum = reg_nr - tdep->ppc_gp0_regnum + tdep->ppc_ev0_regnum;
- /* reg_nr is 32 bit here, and base_regnum is 64 bits. */
- if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
- offset = 4;
-
- /* Let's read the value of the base register into a temporary
- buffer, so that overwriting the last four bytes with the new
- value of the pseudo will leave the upper 4 bytes unchanged. */
- regcache_raw_read (regcache, base_regnum, temp_buffer);
-
- /* Write as an 8 byte quantity. */
- memcpy (temp_buffer + offset, (char *) buffer, 4);
- regcache_raw_write (regcache, base_regnum, temp_buffer);
- }
+ gdb_assert (regcache_arch == gdbarch);
+
+ if (tdep->ppc_ev0_regnum <= reg_nr
+ && reg_nr < tdep->ppc_ev0_regnum + ppc_num_gprs)
+ e500_move_ev_register ((void (*) (struct regcache *, int, void *))
+ regcache_raw_write,
+ regcache, reg_nr, (void *) buffer);
+ else
+ internal_error (__FILE__, __LINE__,
+ "e500_pseudo_register_read: "
+ "called on unexpected register '%s' (%d)",
+ gdbarch_register_name (gdbarch, reg_nr), reg_nr);
+}
+
+/* The E500 needs a custom reggroup function: it has anonymous raw
+ registers, and default_register_reggroup_p assumes that anonymous
+ registers are not members of any reggroup. */
+static int
+e500_register_reggroup_p (struct gdbarch *gdbarch,
+ int regnum,
+ struct reggroup *group)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+
+ /* The save and restore register groups need to include the
+ upper-half registers, even though they're anonymous. */
+ if ((group == save_reggroup
+ || group == restore_reggroup)
+ && (tdep->ppc_ev0_upper_regnum <= regnum
+ && regnum < tdep->ppc_ev0_upper_regnum + ppc_num_gprs))
+ return 1;
+
+ /* In all other regards, the default reggroup definition is fine. */
+ return default_register_reggroup_p (gdbarch, regnum, group);
}
/* Convert a DBX STABS register number to a GDB register number. */
&& TYPE_VECTOR (type))
regnum = tdep->ppc_vr0_regnum + 2;
else
- gdb_assert (0);
+ internal_error (__FILE__, __LINE__,
+ "rs6000_store_return_value: "
+ "unexpected array return type");
}
else
/* Everything else is returned in GPR3 and up. */
/* Return a struct reg defining register NAME that's 32 bits on 32-bit systems
and 64 bits on 64-bit systems. */
-#define R(name) { STR(name), 4, 8, 0, 0 }
+#define R(name) { STR(name), 4, 8, 0, 0, -1 }
/* Return a struct reg defining register NAME that's 32 bits on all
systems. */
-#define R4(name) { STR(name), 4, 4, 0, 0 }
+#define R4(name) { STR(name), 4, 4, 0, 0, -1 }
/* Return a struct reg defining register NAME that's 64 bits on all
systems. */
-#define R8(name) { STR(name), 8, 8, 0, 0 }
+#define R8(name) { STR(name), 8, 8, 0, 0, -1 }
/* Return a struct reg defining register NAME that's 128 bits on all
systems. */
-#define R16(name) { STR(name), 16, 16, 0, 0 }
+#define R16(name) { STR(name), 16, 16, 0, 0, -1 }
/* Return a struct reg defining floating-point register NAME. */
-#define F(name) { STR(name), 8, 8, 1, 0 }
+#define F(name) { STR(name), 8, 8, 1, 0, -1 }
-/* Return a struct reg defining a pseudo register NAME. */
-#define P(name) { STR(name), 4, 8, 0, 1}
+/* Return a struct reg defining a pseudo register NAME that is 64 bits
+ long on all systems. */
+#define P8(name) { STR(name), 8, 8, 0, 1, -1 }
/* Return a struct reg defining register NAME that's 32 bits on 32-bit
systems and that doesn't exist on 64-bit systems. */
-#define R32(name) { STR(name), 4, 0, 0, 0 }
+#define R32(name) { STR(name), 4, 0, 0, 0, -1 }
/* Return a struct reg defining register NAME that's 64 bits on 64-bit
systems and that doesn't exist on 32-bit systems. */
-#define R64(name) { STR(name), 0, 8, 0, 0 }
+#define R64(name) { STR(name), 0, 8, 0, 0, -1 }
/* Return a struct reg placeholder for a register that doesn't exist. */
-#define R0 { 0, 0, 0, 0, 0 }
+#define R0 { 0, 0, 0, 0, 0, -1 }
+
+/* Return a struct reg defining an anonymous raw register that's 32
+ bits on all systems. */
+#define A4 { 0, 4, 4, 0, 0, -1 }
+/* Return a struct reg defining an SPR named NAME that is 32 bits on
+ 32-bit systems and 64 bits on 64-bit systems. */
+#define S(name) { STR(name), 4, 8, 0, 0, ppc_spr_ ## name }
+
+/* Return a struct reg defining an SPR named NAME that is 32 bits on
+ all systems. */
+#define S4(name) { STR(name), 4, 4, 0, 0, ppc_spr_ ## name }
+
+/* Return a struct reg defining an SPR named NAME that is 32 bits on
+ all systems, and whose SPR number is NUMBER. */
+#define SN4(name, number) { STR(name), 4, 4, 0, 0, (number) }
+
+/* Return a struct reg defining an SPR named NAME that's 64 bits on
+ 64-bit systems and that doesn't exist on 32-bit systems. */
+#define S64(name) { STR(name), 0, 8, 0, 0, ppc_spr_ ## name }
+
/* UISA registers common across all architectures, including POWER. */
#define COMMON_UISA_REGS \
/* UISA-level SPRs for PowerPC. */
#define PPC_UISA_SPRS \
- /* 66 */ R4(cr), R(lr), R(ctr), R4(xer), R4(fpscr)
+ /* 66 */ R4(cr), S(lr), S(ctr), S4(xer), R4(fpscr)
/* UISA-level SPRs for PowerPC without floating point support. */
#define PPC_UISA_NOFP_SPRS \
- /* 66 */ R4(cr), R(lr), R(ctr), R4(xer), R0
+ /* 66 */ R4(cr), S(lr), S(ctr), S4(xer), R0
/* Segment registers, for PowerPC. */
#define PPC_SEGMENT_REGS \
/* OEA SPRs for PowerPC. */
#define PPC_OEA_SPRS \
- /* 87 */ R4(pvr), \
- /* 88 */ R(ibat0u), R(ibat0l), R(ibat1u), R(ibat1l), \
- /* 92 */ R(ibat2u), R(ibat2l), R(ibat3u), R(ibat3l), \
- /* 96 */ R(dbat0u), R(dbat0l), R(dbat1u), R(dbat1l), \
- /* 100 */ R(dbat2u), R(dbat2l), R(dbat3u), R(dbat3l), \
- /* 104 */ R(sdr1), R64(asr), R(dar), R4(dsisr), \
- /* 108 */ R(sprg0), R(sprg1), R(sprg2), R(sprg3), \
- /* 112 */ R(srr0), R(srr1), R(tbl), R(tbu), \
- /* 116 */ R4(dec), R(dabr), R4(ear)
+ /* 87 */ S4(pvr), \
+ /* 88 */ S(ibat0u), S(ibat0l), S(ibat1u), S(ibat1l), \
+ /* 92 */ S(ibat2u), S(ibat2l), S(ibat3u), S(ibat3l), \
+ /* 96 */ S(dbat0u), S(dbat0l), S(dbat1u), S(dbat1l), \
+ /* 100 */ S(dbat2u), S(dbat2l), S(dbat3u), S(dbat3l), \
+ /* 104 */ S(sdr1), S64(asr), S(dar), S4(dsisr), \
+ /* 108 */ S(sprg0), S(sprg1), S(sprg2), S(sprg3), \
+ /* 112 */ S(srr0), S(srr1), S(tbl), S(tbu), \
+ /* 116 */ S4(dec), S(dabr), S4(ear)
/* AltiVec registers. */
#define PPC_ALTIVEC_REGS \
/*143*/R16(vr24),R16(vr25),R16(vr26),R16(vr27),R16(vr28),R16(vr29),R16(vr30),R16(vr31), \
/*151*/R4(vscr), R4(vrsave)
-/* Vectors of hi-lo general purpose registers. */
-#define PPC_EV_REGS \
- /* 0*/R8(ev0), R8(ev1), R8(ev2), R8(ev3), R8(ev4), R8(ev5), R8(ev6), R8(ev7), \
- /* 8*/R8(ev8), R8(ev9), R8(ev10),R8(ev11),R8(ev12),R8(ev13),R8(ev14),R8(ev15), \
- /*16*/R8(ev16),R8(ev17),R8(ev18),R8(ev19),R8(ev20),R8(ev21),R8(ev22),R8(ev23), \
- /*24*/R8(ev24),R8(ev25),R8(ev26),R8(ev27),R8(ev28),R8(ev29),R8(ev30),R8(ev31)
-/* Lower half of the EV registers. */
-#define PPC_GPRS_PSEUDO_REGS \
- /* 0 */ P(r0), P(r1), P(r2), P(r3), P(r4), P(r5), P(r6), P(r7), \
- /* 8 */ P(r8), P(r9), P(r10),P(r11),P(r12),P(r13),P(r14),P(r15), \
- /* 16 */ P(r16),P(r17),P(r18),P(r19),P(r20),P(r21),P(r22),P(r23), \
- /* 24 */ P(r24),P(r25),P(r26),P(r27),P(r28),P(r29),P(r30),P(r31)
+/* On machines supporting the SPE APU, the general-purpose registers
+ are 64 bits long. There are SIMD vector instructions to treat them
+ as pairs of floats, but the rest of the instruction set treats them
+ as 32-bit registers, and only operates on their lower halves.
+
+ In the GDB regcache, we treat their high and low halves as separate
+ registers. The low halves we present as the general-purpose
+ registers, and then we have pseudo-registers that stitch together
+ the upper and lower halves and present them as pseudo-registers. */
+
+/* SPE GPR lower halves --- raw registers. */
+#define PPC_SPE_GP_REGS \
+ /* 0 */ R4(r0), R4(r1), R4(r2), R4(r3), R4(r4), R4(r5), R4(r6), R4(r7), \
+ /* 8 */ R4(r8), R4(r9), R4(r10),R4(r11),R4(r12),R4(r13),R4(r14),R4(r15), \
+ /* 16 */ R4(r16),R4(r17),R4(r18),R4(r19),R4(r20),R4(r21),R4(r22),R4(r23), \
+ /* 24 */ R4(r24),R4(r25),R4(r26),R4(r27),R4(r28),R4(r29),R4(r30),R4(r31)
+
+/* SPE GPR upper halves --- anonymous raw registers. */
+#define PPC_SPE_UPPER_GP_REGS \
+ /* 0 */ A4, A4, A4, A4, A4, A4, A4, A4, \
+ /* 8 */ A4, A4, A4, A4, A4, A4, A4, A4, \
+ /* 16 */ A4, A4, A4, A4, A4, A4, A4, A4, \
+ /* 24 */ A4, A4, A4, A4, A4, A4, A4, A4
+
+/* SPE GPR vector registers --- pseudo registers based on underlying
+ gprs and the anonymous upper half raw registers. */
+#define PPC_EV_PSEUDO_REGS \
+/* 0*/P8(ev0), P8(ev1), P8(ev2), P8(ev3), P8(ev4), P8(ev5), P8(ev6), P8(ev7), \
+/* 8*/P8(ev8), P8(ev9), P8(ev10),P8(ev11),P8(ev12),P8(ev13),P8(ev14),P8(ev15),\
+/*16*/P8(ev16),P8(ev17),P8(ev18),P8(ev19),P8(ev20),P8(ev21),P8(ev22),P8(ev23),\
+/*24*/P8(ev24),P8(ev25),P8(ev26),P8(ev27),P8(ev28),P8(ev29),P8(ev30),P8(ev31)
/* IBM POWER (pre-PowerPC) architecture, user-level view. We only cover
user-level SPR's. */
static const struct reg registers_power[] =
{
COMMON_UISA_REGS,
- /* 66 */ R4(cnd), R(lr), R(cnt), R4(xer), R4(mq),
+ /* 66 */ R4(cnd), S(lr), S(cnt), S4(xer), S4(mq),
/* 71 */ R4(fpscr)
};
PPC_ALTIVEC_REGS
};
-/* IBM PowerPC 403. */
+/* IBM PowerPC 403.
+
+ Some notes about the "tcr" special-purpose register:
+ - On the 403 and 403GC, SPR 986 is named "tcr", and it controls the
+ 403's programmable interval timer, fixed interval timer, and
+ watchdog timer.
+ - On the 602, SPR 984 is named "tcr", and it controls the 602's
+ watchdog timer, and nothing else.
+
+ Some of the fields are similar between the two, but they're not
+ compatible with each other. Since the two variants have different
+ registers, with different numbers, but the same name, we can't
+ splice the register name to get the SPR number. */
static const struct reg registers_403[] =
{
COMMON_UISA_REGS,
PPC_UISA_SPRS,
PPC_SEGMENT_REGS,
PPC_OEA_SPRS,
- /* 119 */ R(icdbdr), R(esr), R(dear), R(evpr),
- /* 123 */ R(cdbcr), R(tsr), R(tcr), R(pit),
- /* 127 */ R(tbhi), R(tblo), R(srr2), R(srr3),
- /* 131 */ R(dbsr), R(dbcr), R(iac1), R(iac2),
- /* 135 */ R(dac1), R(dac2), R(dccr), R(iccr),
- /* 139 */ R(pbl1), R(pbu1), R(pbl2), R(pbu2)
+ /* 119 */ S(icdbdr), S(esr), S(dear), S(evpr),
+ /* 123 */ S(cdbcr), S(tsr), SN4(tcr, ppc_spr_403_tcr), S(pit),
+ /* 127 */ S(tbhi), S(tblo), S(srr2), S(srr3),
+ /* 131 */ S(dbsr), S(dbcr), S(iac1), S(iac2),
+ /* 135 */ S(dac1), S(dac2), S(dccr), S(iccr),
+ /* 139 */ S(pbl1), S(pbu1), S(pbl2), S(pbu2)
};
-/* IBM PowerPC 403GC. */
+/* IBM PowerPC 403GC.
+ See the comments about 'tcr' for the 403, above. */
static const struct reg registers_403GC[] =
{
COMMON_UISA_REGS,
PPC_UISA_SPRS,
PPC_SEGMENT_REGS,
PPC_OEA_SPRS,
- /* 119 */ R(icdbdr), R(esr), R(dear), R(evpr),
- /* 123 */ R(cdbcr), R(tsr), R(tcr), R(pit),
- /* 127 */ R(tbhi), R(tblo), R(srr2), R(srr3),
- /* 131 */ R(dbsr), R(dbcr), R(iac1), R(iac2),
- /* 135 */ R(dac1), R(dac2), R(dccr), R(iccr),
- /* 139 */ R(pbl1), R(pbu1), R(pbl2), R(pbu2),
- /* 143 */ R(zpr), R(pid), R(sgr), R(dcwr),
- /* 147 */ R(tbhu), R(tblu)
+ /* 119 */ S(icdbdr), S(esr), S(dear), S(evpr),
+ /* 123 */ S(cdbcr), S(tsr), SN4(tcr, ppc_spr_403_tcr), S(pit),
+ /* 127 */ S(tbhi), S(tblo), S(srr2), S(srr3),
+ /* 131 */ S(dbsr), S(dbcr), S(iac1), S(iac2),
+ /* 135 */ S(dac1), S(dac2), S(dccr), S(iccr),
+ /* 139 */ S(pbl1), S(pbu1), S(pbl2), S(pbu2),
+ /* 143 */ S(zpr), S(pid), S(sgr), S(dcwr),
+ /* 147 */ S(tbhu), S(tblu)
};
/* Motorola PowerPC 505. */
PPC_UISA_SPRS,
PPC_SEGMENT_REGS,
PPC_OEA_SPRS,
- /* 119 */ R(eie), R(eid), R(nri)
+ /* 119 */ S(eie), S(eid), S(nri)
};
/* Motorola PowerPC 860 or 850. */
PPC_UISA_SPRS,
PPC_SEGMENT_REGS,
PPC_OEA_SPRS,
- /* 119 */ R(eie), R(eid), R(nri), R(cmpa),
- /* 123 */ R(cmpb), R(cmpc), R(cmpd), R(icr),
- /* 127 */ R(der), R(counta), R(countb), R(cmpe),
- /* 131 */ R(cmpf), R(cmpg), R(cmph), R(lctrl1),
- /* 135 */ R(lctrl2), R(ictrl), R(bar), R(ic_cst),
- /* 139 */ R(ic_adr), R(ic_dat), R(dc_cst), R(dc_adr),
- /* 143 */ R(dc_dat), R(dpdr), R(dpir), R(immr),
- /* 147 */ R(mi_ctr), R(mi_ap), R(mi_epn), R(mi_twc),
- /* 151 */ R(mi_rpn), R(md_ctr), R(m_casid), R(md_ap),
- /* 155 */ R(md_epn), R(m_twb), R(md_twc), R(md_rpn),
- /* 159 */ R(m_tw), R(mi_dbcam), R(mi_dbram0), R(mi_dbram1),
- /* 163 */ R(md_dbcam), R(md_dbram0), R(md_dbram1)
+ /* 119 */ S(eie), S(eid), S(nri), S(cmpa),
+ /* 123 */ S(cmpb), S(cmpc), S(cmpd), S(icr),
+ /* 127 */ S(der), S(counta), S(countb), S(cmpe),
+ /* 131 */ S(cmpf), S(cmpg), S(cmph), S(lctrl1),
+ /* 135 */ S(lctrl2), S(ictrl), S(bar), S(ic_cst),
+ /* 139 */ S(ic_adr), S(ic_dat), S(dc_cst), S(dc_adr),
+ /* 143 */ S(dc_dat), S(dpdr), S(dpir), S(immr),
+ /* 147 */ S(mi_ctr), S(mi_ap), S(mi_epn), S(mi_twc),
+ /* 151 */ S(mi_rpn), S(md_ctr), S(m_casid), S(md_ap),
+ /* 155 */ S(md_epn), S(m_twb), S(md_twc), S(md_rpn),
+ /* 159 */ S(m_tw), S(mi_dbcam), S(mi_dbram0), S(mi_dbram1),
+ /* 163 */ S(md_dbcam), S(md_dbram0), S(md_dbram1)
};
/* Motorola PowerPC 601. Note that the 601 has different register numbers
PPC_UISA_SPRS,
PPC_SEGMENT_REGS,
PPC_OEA_SPRS,
- /* 119 */ R(hid0), R(hid1), R(iabr), R(dabr),
- /* 123 */ R(pir), R(mq), R(rtcu), R(rtcl)
+ /* 119 */ S(hid0), S(hid1), S(iabr), S(dabr),
+ /* 123 */ S(pir), S(mq), S(rtcu), S(rtcl)
};
-/* Motorola PowerPC 602. */
+/* Motorola PowerPC 602.
+ See the notes under the 403 about 'tcr'. */
static const struct reg registers_602[] =
{
COMMON_UISA_REGS,
PPC_UISA_SPRS,
PPC_SEGMENT_REGS,
PPC_OEA_SPRS,
- /* 119 */ R(hid0), R(hid1), R(iabr), R0,
- /* 123 */ R0, R(tcr), R(ibr), R(esassr),
- /* 127 */ R(sebr), R(ser), R(sp), R(lt)
+ /* 119 */ S(hid0), S(hid1), S(iabr), R0,
+ /* 123 */ R0, SN4(tcr, ppc_spr_602_tcr), S(ibr), S(esasrr),
+ /* 127 */ S(sebr), S(ser), S(sp), S(lt)
};
/* Motorola/IBM PowerPC 603 or 603e. */
PPC_UISA_SPRS,
PPC_SEGMENT_REGS,
PPC_OEA_SPRS,
- /* 119 */ R(hid0), R(hid1), R(iabr), R0,
- /* 123 */ R0, R(dmiss), R(dcmp), R(hash1),
- /* 127 */ R(hash2), R(imiss), R(icmp), R(rpa)
+ /* 119 */ S(hid0), S(hid1), S(iabr), R0,
+ /* 123 */ R0, S(dmiss), S(dcmp), S(hash1),
+ /* 127 */ S(hash2), S(imiss), S(icmp), S(rpa)
};
/* Motorola PowerPC 604 or 604e. */
PPC_UISA_SPRS,
PPC_SEGMENT_REGS,
PPC_OEA_SPRS,
- /* 119 */ R(hid0), R(hid1), R(iabr), R(dabr),
- /* 123 */ R(pir), R(mmcr0), R(pmc1), R(pmc2),
- /* 127 */ R(sia), R(sda)
+ /* 119 */ S(hid0), S(hid1), S(iabr), S(dabr),
+ /* 123 */ S(pir), S(mmcr0), S(pmc1), S(pmc2),
+ /* 127 */ S(sia), S(sda)
};
/* Motorola/IBM PowerPC 750 or 740. */
PPC_UISA_SPRS,
PPC_SEGMENT_REGS,
PPC_OEA_SPRS,
- /* 119 */ R(hid0), R(hid1), R(iabr), R(dabr),
- /* 123 */ R0, R(ummcr0), R(upmc1), R(upmc2),
- /* 127 */ R(usia), R(ummcr1), R(upmc3), R(upmc4),
- /* 131 */ R(mmcr0), R(pmc1), R(pmc2), R(sia),
- /* 135 */ R(mmcr1), R(pmc3), R(pmc4), R(l2cr),
- /* 139 */ R(ictc), R(thrm1), R(thrm2), R(thrm3)
+ /* 119 */ S(hid0), S(hid1), S(iabr), S(dabr),
+ /* 123 */ R0, S(ummcr0), S(upmc1), S(upmc2),
+ /* 127 */ S(usia), S(ummcr1), S(upmc3), S(upmc4),
+ /* 131 */ S(mmcr0), S(pmc1), S(pmc2), S(sia),
+ /* 135 */ S(mmcr1), S(pmc3), S(pmc4), S(l2cr),
+ /* 139 */ S(ictc), S(thrm1), S(thrm2), S(thrm3)
};
/* Motorola e500. */
static const struct reg registers_e500[] =
{
- R(pc), R(ps),
- /* cr, lr, ctr, xer, "" */
- PPC_UISA_NOFP_SPRS,
- /* 7...38 */
- PPC_EV_REGS,
- R8(acc), R(spefscr),
+ /* 0 .. 31 */ PPC_SPE_GP_REGS,
+ /* 32 .. 63 */ PPC_SPE_UPPER_GP_REGS,
+ /* 64 .. 65 */ R(pc), R(ps),
+ /* 66 .. 70 */ PPC_UISA_NOFP_SPRS,
+ /* 71 .. 72 */ R8(acc), S4(spefscr),
/* NOTE: Add new registers here the end of the raw register
list and just before the first pseudo register. */
- /* 41...72 */
- PPC_GPRS_PSEUDO_REGS
+ /* 73 .. 104 */ PPC_EV_PSEUDO_REGS
};
/* Information about a particular processor variant. */
{
struct rs6000_frame_cache *info = rs6000_frame_cache (next_frame,
this_cache);
- trad_frame_prev_register (next_frame, info->saved_regs, regnum,
- optimizedp, lvalp, addrp, realnump, valuep);
+ trad_frame_get_prev_register (next_frame, info->saved_regs, regnum,
+ optimizedp, lvalp, addrp, realnump, valuep);
}
static const struct frame_unwind rs6000_frame_unwind =
{
struct gdbarch *gdbarch;
struct gdbarch_tdep *tdep;
- int wordsize, from_xcoff_exec, from_elf_exec, power, i, off;
+ int wordsize, from_xcoff_exec, from_elf_exec, i, off;
struct reg *regs;
const struct variant *v;
enum bfd_architecture arch;
}
gdbarch = gdbarch_alloc (&info, tdep);
- power = arch == bfd_arch_rs6000;
/* Initialize the number of real and pseudo registers in each variant. */
init_variants ();
tdep->regs = v->regs;
tdep->ppc_gp0_regnum = 0;
- tdep->ppc_gprs_pseudo_p = 0;
tdep->ppc_toc_regnum = 2;
tdep->ppc_ps_regnum = 65;
tdep->ppc_cr_regnum = 66;
tdep->ppc_xer_regnum = 69;
if (v->mach == bfd_mach_ppc_601)
tdep->ppc_mq_regnum = 124;
- else if (power)
+ else if (arch == bfd_arch_rs6000)
tdep->ppc_mq_regnum = 70;
else
tdep->ppc_mq_regnum = -1;
tdep->ppc_fp0_regnum = 32;
- tdep->ppc_fpscr_regnum = power ? 71 : 70;
+ tdep->ppc_fpscr_regnum = (arch == bfd_arch_rs6000) ? 71 : 70;
tdep->ppc_sr0_regnum = 71;
tdep->ppc_vr0_regnum = -1;
tdep->ppc_vrsave_regnum = -1;
+ tdep->ppc_ev0_upper_regnum = -1;
tdep->ppc_ev0_regnum = -1;
tdep->ppc_ev31_regnum = -1;
tdep->ppc_acc_regnum = -1;
set_gdbarch_pc_regnum (gdbarch, 64);
set_gdbarch_sp_regnum (gdbarch, 1);
set_gdbarch_deprecated_fp_regnum (gdbarch, 1);
+ set_gdbarch_register_sim_regno (gdbarch, rs6000_register_sim_regno);
if (sysv_abi && wordsize == 8)
set_gdbarch_return_value (gdbarch, ppc64_sysv_abi_return_value);
else if (sysv_abi && wordsize == 4)
switch (v->mach)
{
case bfd_mach_ppc:
+ tdep->ppc_sr0_regnum = -1;
tdep->ppc_vr0_regnum = 71;
tdep->ppc_vrsave_regnum = 104;
break;
tdep->ppc_vrsave_regnum = 152;
break;
case bfd_mach_ppc_e500:
- tdep->ppc_gp0_regnum = 41;
- tdep->ppc_gprs_pseudo_p = 1;
tdep->ppc_toc_regnum = -1;
- tdep->ppc_ps_regnum = 1;
- tdep->ppc_cr_regnum = 2;
- tdep->ppc_lr_regnum = 3;
- tdep->ppc_ctr_regnum = 4;
- tdep->ppc_xer_regnum = 5;
- tdep->ppc_ev0_regnum = 7;
- tdep->ppc_ev31_regnum = 38;
+ tdep->ppc_ev0_upper_regnum = 32;
+ tdep->ppc_ev0_regnum = 73;
+ tdep->ppc_ev31_regnum = 104;
+ tdep->ppc_acc_regnum = 71;
+ tdep->ppc_spefscr_regnum = 72;
tdep->ppc_fp0_regnum = -1;
tdep->ppc_fpscr_regnum = -1;
tdep->ppc_sr0_regnum = -1;
- tdep->ppc_acc_regnum = 39;
- tdep->ppc_spefscr_regnum = 40;
- set_gdbarch_pc_regnum (gdbarch, 0);
- set_gdbarch_sp_regnum (gdbarch, tdep->ppc_gp0_regnum + 1);
- set_gdbarch_deprecated_fp_regnum (gdbarch, tdep->ppc_gp0_regnum + 1);
set_gdbarch_pseudo_register_read (gdbarch, e500_pseudo_register_read);
set_gdbarch_pseudo_register_write (gdbarch, e500_pseudo_register_write);
+ set_gdbarch_register_reggroup_p (gdbarch, e500_register_reggroup_p);
break;
case bfd_mach_ppc64:
gdb_assert (strcmp (tdep->regs[tdep->ppc_gp0_regnum].name, "r0") == 0);
/* Select instruction printer. */
- if (arch == power)
+ if (arch == bfd_arch_rs6000)
set_gdbarch_print_insn (gdbarch, print_insn_rs6000);
else
set_gdbarch_print_insn (gdbarch, gdb_print_insn_powerpc);
set_gdbarch_software_single_step (gdbarch, rs6000_software_single_step);
}
+ init_sim_regno_table (gdbarch);
+
return gdbarch;
}
projects / deliverable / binutils-gdb.git / blobdiff