/* Remote serial interface for local (hardwired) serial ports for GO32.
- Copyright 1992, 1993, 2000, 2001 Free Software Foundation, Inc.
+ Copyright (C) 1992-2020 Free Software Foundation, Inc.
Contributed by Nigel Stephens, Algorithmics Ltd. (nigel@algor.co.uk).
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include "gdbcmd.h"
#include "serial.h"
-#include "gdb_string.h"
-
-
/*
* NS16550 UART registers
*/
#define NCNT 20
static int intrcnt;
-static int cnts[NCNT];
+static size_t cnts[NCNT];
static char *cntnames[NCNT] =
{
- /* h/w interrupt counts. */
+ /* h/w interrupt counts. */
"mlsc", "nopend", "txrdy", "?3",
"rxrdy", "?5", "rls", "?7",
"?8", "?9", "?a", "?b",
"rxtout", "?d", "?e", "?f",
- /* s/w counts. */
+ /* s/w counts. */
"rxcnt", "txcnt", "stray", "swoflo"
};
#define COUNT(x)
#endif
-/* Main interrupt controller port addresses. */
+/* Main interrupt controller port addresses. */
#define ICU_BASE 0x20
#define ICU_OCW2 (ICU_BASE + 0)
#define ICU_MASK (ICU_BASE + 1)
-/* Original interrupt controller mask register. */
+/* Original interrupt controller mask register. */
unsigned char icu_oldmask;
-/* Maximum of 8 interrupts (we don't handle the slave icu yet). */
+/* Maximum of 8 interrupts (we don't handle the slave icu yet). */
#define NINTR 8
static struct intrupt
static void dos_raw (struct serial *scb);
static int dos_readchar (struct serial *scb, int timeout);
static int dos_setbaudrate (struct serial *scb, int rate);
-static int dos_write (struct serial *scb, const char *str, int len);
+static int dos_write (struct serial *scb, const void *buf, size_t count);
static void dos_close (struct serial *scb);
static serial_ttystate dos_get_tty_state (struct serial *scb);
static int dos_set_tty_state (struct serial *scb, serial_ttystate state);
break;
case IIR_NOPEND:
- /* no more pending interrupts, all done */
+ /* No more pending interrupts, all done. */
return;
default:
- /* unexpected interrupt, ignore */
+ /* Unexpected interrupt, ignore. */
break;
}
COUNT (iir);
vec = 0x08 + irq;
isr = isrs[irq];
- /* setup real mode handler */
+ /* Setup real mode handler. */
_go32_dpmi_get_real_mode_interrupt_vector (vec, &intr->old_rmhandler);
intr->new_rmhandler.pm_selector = _go32_my_cs ();
return 0;
}
- /* setup protected mode handler */
+ /* Setup protected mode handler. */
_go32_dpmi_get_protected_mode_interrupt_vector (vec, &intr->old_pmhandler);
intr->new_pmhandler.pm_selector = _go32_my_cs ();
return 0;
}
- /* setup interrupt controller mask */
+ /* Setup interrupt controller mask. */
disable ();
outportb (ICU_MASK, inportb (ICU_MASK) & ~(1 << irq));
enable ();
irq = intr - intrupts;
vec = 0x08 + irq;
- /* restore old interrupt mask bit */
+ /* Restore old interrupt mask bit. */
mask = 1 << irq;
disable ();
outportb (ICU_MASK, inportb (ICU_MASK) | (mask & icu_oldmask));
enable ();
- /* remove real mode handler */
+ /* Remove real mode handler. */
_go32_dpmi_set_real_mode_interrupt_vector (vec, &intr->old_rmhandler);
_go32_dpmi_free_real_mode_callback (&intr->new_rmhandler);
- /* remove protected mode handler */
+ /* Remove protected mode handler. */
_go32_dpmi_set_protected_mode_interrupt_vector (vec, &intr->old_pmhandler);
_go32_dpmi_free_iret_wrapper (&intr->new_pmhandler);
intr->inuse = 0;
port = &ports[fd];
if (port->refcnt++ > 0)
{
- /* Device already opened another user. Just point at it. */
+ /* Device already opened another user. Just point at it. */
scb->fd = fd;
return 0;
}
- /* force access to ID reg */
+ /* Force access to ID reg. */
outb (port, com_cfcr, 0);
outb (port, com_iir, 0);
for (i = 0; i < 17; i++)
return -1;
ok:
- /* disable all interrupts in chip */
+ /* Disable all interrupts in chip. */
outb (port, com_ier, 0);
- /* tentatively enable 16550 fifo, and see if it responds */
+ /* Tentatively enable 16550 fifo, and see if it responds. */
outb (port, com_fifo,
FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | FIFO_TRIGGER);
sleep (1);
port->fifo = ((inb (port, com_iir) & IIR_FIFO_MASK) == IIR_FIFO_MASK);
- /* clear pending status reports. */
+ /* clear pending status reports. */
(void) inb (port, com_lsr);
(void) inb (port, com_msr);
- /* enable external interrupt gate (to avoid floating IRQ) */
+ /* Enable external interrupt gate (to avoid floating IRQ). */
outb (port, com_mcr, MCR_IENABLE);
- /* hook up interrupt handler and initialise icu */
+ /* Hook up interrupt handler and initialise icu. */
port->intrupt = dos_hookirq (port->irq);
if (!port->intrupt)
{
port->intrupt->port = port;
scb->fd = fd;
- /* clear rx buffer, tx busy flag and overflow count */
+ /* Clear rx buffer, tx busy flag and overflow count. */
port->first = port->count = 0;
port->txbusy = 0;
port->oflo = 0;
- /* set default baud rate and mode: 9600,8,n,1 */
+ /* Set default baud rate and mode: 9600,8,n,1 */
i = dos_baudconv (port->baudrate = 9600);
outb (port, com_cfcr, CFCR_DLAB);
outb (port, com_dlbl, i & 0xff);
outb (port, com_dlbh, i >> 8);
outb (port, com_cfcr, CFCR_8BITS);
- /* enable all interrupts */
+ /* Enable all interrupts. */
outb (port, com_ier, IER_ETXRDY | IER_ERXRDY | IER_ERLS | IER_EMSC);
- /* enable DTR & RTS */
+ /* Enable DTR & RTS. */
outb (port, com_mcr, MCR_DTR | MCR_RTS | MCR_IENABLE);
enable ();
if (!(intrupt = port->intrupt))
return;
- /* disable interrupts, fifo, flow control */
+ /* Disable interrupts, fifo, flow control. */
disable ();
port->intrupt = 0;
intrupt->port = 0;
outb (port, com_ier, 0);
enable ();
- /* unhook handler, and disable interrupt gate */
+ /* Unhook handler, and disable interrupt gate. */
dos_unhookirq (intrupt);
outb (port, com_mcr, 0);
- /* Check for overflow errors */
+ /* Check for overflow errors. */
if (port->oflo)
{
fprintf_unfiltered (gdb_stderr,
}
\f
+/* Implementation of the serial_ops flush_output method. */
+
+static int
+dos_flush_output (struct serial *scb)
+{
+ return 0;
+}
+
+/* Implementation of the serial_ops setparity method. */
static int
-dos_noop (struct serial *scb)
+dos_setparity (struct serial *scb, int parity)
+{
+ return 0;
+}
+
+/* Implementation of the serial_ops drain_output method. */
+
+static int
+dos_drain_output (struct serial *scb)
{
return 0;
}
static void
dos_raw (struct serial *scb)
{
- /* Always in raw mode */
+ /* Always in raw mode. */
}
static int
then = rawclock () + (timeout * RAWHZ);
while ((c = dos_getc (port)) < 0)
{
+ QUIT;
+
if (timeout >= 0 && (rawclock () - then) >= 0)
return SERIAL_TIMEOUT;
}
/* We've never heard about this port. We should fail this call,
unless they are asking about one of the 3 standard handles,
in which case we pretend the handle was open by us if it is
- connected to a terminal device. This is beacuse Unix
+ connected to a terminal device. This is because Unix
terminals use the serial interface, so GDB expects the
standard handles to go through here. */
if (scb->fd >= 3 || !isatty (scb->fd))
return NULL;
}
- state = (struct dos_ttystate *) xmalloc (sizeof *state);
+ state = XNEW (struct dos_ttystate);
*state = *port;
return (serial_ttystate) state;
}
-static int
-dos_set_tty_state (struct serial *scb, serial_ttystate ttystate)
+static serial_ttystate
+dos_copy_tty_state (struct serial *scb, serial_ttystate ttystate)
{
struct dos_ttystate *state;
- state = (struct dos_ttystate *) ttystate;
- dos_setbaudrate (scb, state->baudrate);
- return 0;
+ state = XNEW (struct dos_ttystate);
+ *state = *(struct dos_ttystate *) ttystate;
+
+ return (serial_ttystate) state;
}
static int
-dos_noflush_set_tty_state (struct serial *scb, serial_ttystate new_ttystate,
- serial_ttystate old_ttystate)
+dos_set_tty_state (struct serial *scb, serial_ttystate ttystate)
{
struct dos_ttystate *state;
- state = (struct dos_ttystate *) new_ttystate;
+ state = (struct dos_ttystate *) ttystate;
dos_setbaudrate (scb, state->baudrate);
return 0;
}
dos_flush_input (struct serial *scb)
{
struct dos_ttystate *port = &ports[scb->fd];
+
disable ();
port->first = port->count = 0;
if (port->fifo)
dos_print_tty_state (struct serial *scb, serial_ttystate ttystate,
struct ui_file *stream)
{
- /* Nothing to print */
+ /* Nothing to print. */
return;
}
if (rate <= 0)
return -1;
-#define divrnd(n, q) (((n) * 2 / (q) + 1) / 2) /* divide and round off */
+#define divrnd(n, q) (((n) * 2 / (q) + 1) / 2) /* Divide and round off. */
x = divrnd (COMTICK, rate);
if (x <= 0)
return -1;
}
static int
-dos_write (struct serial *scb, const char *str, int len)
+dos_write (struct serial *scb, const void *buf, size_t count)
{
volatile struct dos_ttystate *port = &ports[scb->fd];
- int fifosize = port->fifo ? 16 : 1;
+ size_t fifosize = port->fifo ? 16 : 1;
long then;
- int cnt;
+ size_t cnt;
+ const char *str = (const char *) buf;
- while (len > 0)
+ while (count > 0)
{
- /* send the data, fifosize bytes at a time */
- cnt = fifosize > len ? len : fifosize;
+ QUIT;
+
+ /* Send the data, fifosize bytes at a time. */
+ cnt = fifosize > count ? count : fifosize;
port->txbusy = 1;
/* Francisco Pastor <fpastor.etra-id@etra.es> says OUTSB messes
up the communications with UARTs with FIFOs. */
#ifdef UART_FIFO_WORKS
outportsb (port->base + com_data, str, cnt);
str += cnt;
- len -= cnt;
+ count -= cnt;
#else
- for ( ; cnt > 0; cnt--, len--)
+ for ( ; cnt > 0; cnt--, count--)
outportb (port->base + com_data, *str++);
#endif
#ifdef DOS_STATS
cnts[CNT_TX] += cnt;
#endif
- /* wait for transmission to complete (max 1 sec) */
+ /* Wait for transmission to complete (max 1 sec). */
then = rawclock () + RAWHZ;
while (port->txbusy)
{
}
-static struct serial_ops dos_ops =
+static const struct serial_ops dos_ops =
{
"hardwire",
- 0,
dos_open,
dos_close,
+ NULL, /* fdopen, not implemented */
dos_readchar,
dos_write,
- dos_noop, /* flush output */
+ dos_flush_output,
dos_flush_input,
dos_sendbreak,
dos_raw,
dos_get_tty_state,
+ dos_copy_tty_state,
dos_set_tty_state,
dos_print_tty_state,
- dos_noflush_set_tty_state,
dos_setbaudrate,
dos_setstopbits,
- dos_noop, /* wait for output to drain */
- (void (*)(struct serial *, int))NULL /* change into async mode */
+ dos_setparity,
+ dos_drain_output,
+ (void (*)(struct serial *, int))NULL /* Change into async mode. */
};
+int
+gdb_pipe (int pdes[2])
+{
+ /* No support for pipes. */
+ errno = ENOSYS;
+ return -1;
+}
static void
-dos_info (char *arg, int from_tty)
+info_serial_command (const char *arg, int from_tty)
{
struct dos_ttystate *port;
#ifdef DOS_STATS
printf_filtered ("\nTotal interrupts: %d\n", intrcnt);
for (i = 0; i < NCNT; i++)
if (cnts[i])
- printf_filtered ("%s:\t%d\n", cntnames[i], cnts[i]);
+ printf_filtered ("%s:\t%lu\n", cntnames[i], (unsigned long) cnts[i]);
#endif
}
-
void
_initialize_ser_dos (void)
{
serial_add_interface (&dos_ops);
- /* Save original interrupt mask register. */
+ /* Save original interrupt mask register. */
icu_oldmask = inportb (ICU_MASK);
- /* Mark fixed motherboard irqs as inuse. */
+ /* Mark fixed motherboard irqs as inuse. */
intrupts[0].inuse = /* timer tick */
intrupts[1].inuse = /* keyboard */
intrupts[2].inuse = 1; /* slave icu */
NULL, /* FIXME: i18n: */
&setlist, &showlist);
- add_info ("serial", dos_info,
+ add_info ("serial", info_serial_command,
_("Print DOS serial port status."));
}