/* Serial interface for local (hardwired) serial ports on Un*x like systems
- Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
- 2003, 2004, 2005 Free Software Foundation, Inc.
+ Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2003,
+ 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include "serial.h"
#include <sys/socket.h>
#include <sys/time.h>
+#include "gdb_select.h"
#include "gdb_string.h"
+#include "gdbcmd.h"
#ifdef HAVE_TERMIOS
{
struct termios termios;
};
+
+#ifdef CRTSCTS
+/* Boolean to explicitly enable or disable h/w flow control. */
+static int serial_hwflow;
+static void
+show_serial_hwflow (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("Hardware flow control is %s.\n"), value);
+}
+#endif
+
#endif /* termios */
#ifdef HAVE_TERMIO
static int wait_for (struct serial *scb, int timeout);
static int hardwire_readchar (struct serial *scb, int timeout);
static int do_hardwire_readchar (struct serial *scb, int timeout);
-static int generic_readchar (struct serial *scb, int timeout,
- int (*do_readchar) (struct serial *scb,
- int timeout));
static int rate_to_code (int rate);
static int hardwire_setbaudrate (struct serial *scb, int rate);
static void hardwire_close (struct serial *scb);
the full length of time. I think that is OK. */
timeout.tv_sec = 0;
timeout.tv_usec = 250000;
- select (0, 0, 0, 0, &timeout);
+ gdb_select (0, 0, 0, 0, &timeout);
status = ioctl (scb->fd, TIOCCBRK, 0);
return status;
}
state.termios.c_lflag = 0;
state.termios.c_cflag &= ~(CSIZE | PARENB);
state.termios.c_cflag |= CLOCAL | CS8;
+#ifdef CRTSCTS
+ /* h/w flow control. */
+ if (serial_hwflow)
+ state.termios.c_cflag |= CRTSCTS;
+ else
+ state.termios.c_cflag &= ~CRTSCTS;
+#ifdef CRTS_IFLOW
+ if (serial_hwflow)
+ state.termios.c_cflag |= CRTS_IFLOW;
+ else
+ state.termios.c_cflag &= ~CRTS_IFLOW;
+#endif
+#endif
state.termios.c_cc[VMIN] = 0;
state.termios.c_cc[VTIME] = 0;
#endif
*/
/* FIXME: cagney/1999-09-16: Don't replace this with the equivalent
- ser_unix*() until the old TERMIOS/SGTTY/... timer code has been
+ ser_base*() until the old TERMIOS/SGTTY/... timer code has been
flushed. . */
/* NOTE: cagney/1999-09-30: Much of the code below is dead. The only
FD_SET (scb->fd, &readfds);
if (timeout >= 0)
- numfds = select (scb->fd + 1, &readfds, 0, 0, &tv);
+ numfds = gdb_select (scb->fd + 1, &readfds, 0, 0, &tv);
else
- numfds = select (scb->fd + 1, &readfds, 0, 0, 0);
+ numfds = gdb_select (scb->fd + 1, &readfds, 0, 0, 0);
if (numfds <= 0)
if (numfds == 0)
dropped dead, or SERIAL_ERROR for any other error (see errno in that case). */
/* FIXME: cagney/1999-09-16: Don't replace this with the equivalent
- ser_unix*() until the old TERMIOS/SGTTY/... timer code has been
+ ser_base*() until the old TERMIOS/SGTTY/... timer code has been
flushed. */
/* NOTE: cagney/1999-09-16: This function is not identical to
- ser_unix_readchar() as part of replacing it with ser_unix*()
+ ser_base_readchar() as part of replacing it with ser_base*()
merging will be required - this code handles the case where read()
- times out due to no data while ser_unix_readchar() doesn't expect
+ times out due to no data while ser_base_readchar() doesn't expect
that. */
static int
close (scb->fd);
scb->fd = -1;
}
-
\f
-/* Wait for input on scb, with timeout seconds. Returns 0 on success,
- otherwise SERIAL_TIMEOUT or SERIAL_ERROR. */
-
-static int
-ser_unix_wait_for (struct serial *scb, int timeout)
-{
- while (1)
- {
- int numfds;
- struct timeval tv;
- fd_set readfds, exceptfds;
-
- /* NOTE: Some OS's can scramble the READFDS when the select()
- call fails (ex the kernel with Red Hat 5.2). Initialize all
- arguments before each call. */
-
- tv.tv_sec = timeout;
- tv.tv_usec = 0;
-
- FD_ZERO (&readfds);
- FD_ZERO (&exceptfds);
- FD_SET (scb->fd, &readfds);
- FD_SET (scb->fd, &exceptfds);
-
- if (timeout >= 0)
- numfds = select (scb->fd + 1, &readfds, 0, &exceptfds, &tv);
- else
- numfds = select (scb->fd + 1, &readfds, 0, &exceptfds, 0);
-
- if (numfds <= 0)
- {
- if (numfds == 0)
- return SERIAL_TIMEOUT;
- else if (errno == EINTR)
- continue;
- else
- return SERIAL_ERROR; /* Got an error from select or poll */
- }
-
- return 0;
- }
-}
-
-/* Read a character with user-specified timeout. TIMEOUT is number of seconds
- to wait, or -1 to wait forever. Use timeout of 0 to effect a poll. Returns
- char if successful. Returns -2 if timeout expired, EOF if line dropped
- dead, or -3 for any other error (see errno in that case). */
-
-static int
-do_unix_readchar (struct serial *scb, int timeout)
-{
- int status;
- int delta;
-
- /* We have to be able to keep the GUI alive here, so we break the
- original timeout into steps of 1 second, running the "keep the
- GUI alive" hook each time through the loop.
-
- Also, timeout = 0 means to poll, so we just set the delta to 0,
- so we will only go through the loop once. */
-
- delta = (timeout == 0 ? 0 : 1);
- while (1)
- {
-
- /* N.B. The UI may destroy our world (for instance by calling
- remote_stop,) in which case we want to get out of here as
- quickly as possible. It is not safe to touch scb, since
- someone else might have freed it. The
- deprecated_ui_loop_hook signals that we should exit by
- returning 1. */
-
- if (deprecated_ui_loop_hook)
- {
- if (deprecated_ui_loop_hook (0))
- return SERIAL_TIMEOUT;
- }
-
- status = ser_unix_wait_for (scb, delta);
- if (timeout > 0)
- timeout -= delta;
-
- /* If we got a character or an error back from wait_for, then we can
- break from the loop before the timeout is completed. */
-
- if (status != SERIAL_TIMEOUT)
- {
- break;
- }
-
- /* If we have exhausted the original timeout, then generate
- a SERIAL_TIMEOUT, and pass it out of the loop. */
-
- else if (timeout == 0)
- {
- status = SERIAL_TIMEOUT;
- break;
- }
- }
-
- if (status < 0)
- return status;
-
- while (1)
- {
- status = read (scb->fd, scb->buf, BUFSIZ);
- if (status != -1 || errno != EINTR)
- break;
- }
-
- if (status <= 0)
- {
- if (status == 0)
- return SERIAL_TIMEOUT; /* 0 chars means timeout [may need to
- distinguish between EOF & timeouts
- someday] */
- else
- return SERIAL_ERROR; /* Got an error from read */
- }
-
- scb->bufcnt = status;
- scb->bufcnt--;
- scb->bufp = scb->buf;
- return *scb->bufp++;
-}
-
-/* Perform operations common to both old and new readchar. */
-
-/* Return the next character from the input FIFO. If the FIFO is
- empty, call the SERIAL specific routine to try and read in more
- characters.
-
- Initially data from the input FIFO is returned (fd_event()
- pre-reads the input into that FIFO. Once that has been emptied,
- further data is obtained by polling the input FD using the device
- specific readchar() function. Note: reschedule() is called after
- every read. This is because there is no guarentee that the lower
- level fd_event() poll_event() code (which also calls reschedule())
- will be called. */
-
-static int
-generic_readchar (struct serial *scb, int timeout,
- int (do_readchar) (struct serial *scb, int timeout))
-{
- int ch;
- if (scb->bufcnt > 0)
- {
- ch = *scb->bufp;
- scb->bufcnt--;
- scb->bufp++;
- }
- else if (scb->bufcnt < 0)
- {
- /* Some errors/eof are are sticky. */
- ch = scb->bufcnt;
- }
- else
- {
- ch = do_readchar (scb, timeout);
- if (ch < 0)
- {
- switch ((enum serial_rc) ch)
- {
- case SERIAL_EOF:
- case SERIAL_ERROR:
- /* Make the error/eof stick. */
- scb->bufcnt = ch;
- break;
- case SERIAL_TIMEOUT:
- scb->bufcnt = 0;
- break;
- }
- }
- }
- reschedule (scb);
- return ch;
-}
-
-int
-ser_unix_readchar (struct serial *scb, int timeout)
-{
- return generic_readchar (scb, timeout, do_unix_readchar);
-}
\f
void
_initialize_ser_hardwire (void)
ops->next = 0;
ops->open = hardwire_open;
ops->close = hardwire_close;
- /* FIXME: Don't replace this with the equivalent ser_unix*() until
+ /* FIXME: Don't replace this with the equivalent ser_base*() until
the old TERMIOS/SGTTY/... timer code has been flushed. cagney
1999-09-16. */
ops->readchar = hardwire_readchar;
ops->setstopbits = hardwire_setstopbits;
ops->drain_output = hardwire_drain_output;
ops->async = ser_base_async;
+ ops->read_prim = ser_unix_read_prim;
+ ops->write_prim = ser_unix_write_prim;
serial_add_interface (ops);
+
+#ifdef HAVE_TERMIOS
+#ifdef CRTSCTS
+ add_setshow_boolean_cmd ("remoteflow", no_class,
+ &serial_hwflow, _("\
+Set use of hardware flow control for remote serial I/O."), _("\
+Show use of hardware flow control for remote serial I/O."), _("\
+Enable or disable hardware flow control (RTS/CTS) on the serial port\n\
+when debugging using remote targets."),
+ NULL,
+ show_serial_hwflow,
+ &setlist, &showlist);
+#endif
+#endif
+}
+
+int
+ser_unix_read_prim (struct serial *scb, size_t count)
+{
+ int status;
+
+ while (1)
+ {
+ status = read (scb->fd, scb->buf, count);
+ if (status != -1 || errno != EINTR)
+ break;
+ }
+ return status;
+}
+
+int
+ser_unix_write_prim (struct serial *scb, const void *buf, size_t len)
+{
+ /* ??? Historically, GDB has not retried calls to "write" that
+ result in EINTR. */
+ return write (scb->fd, buf, len);
}
projects / deliverable / binutils-gdb.git / blobdiff