/* Handle OSF/1, Digital UNIX, and Tru64 shared libraries
for GDB, the GNU Debugger.
- Copyright (C) 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2007
- Free Software Foundation, Inc.
+ Copyright (C) 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2007, 2008,
+ 2009, 2010, 2011 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor,
- Boston, MA 02110-1301, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
/* When handling shared libraries, GDB has to find out the pathnames
of all shared libraries that are currently loaded (to read in their
1) Peek around in the runtime loader structures.
These are not documented, and they are not defined in the system
- header files. The definitions below were obtained by experimentation,
+ header files. The definitions below were obtained by experimentation,
but they seem stable enough.
2) Use the libxproc.a library, which contains the equivalent ldr_*
#include "objfiles.h"
#include "target.h"
#include "inferior.h"
+#include "gdbthread.h"
#include "solist.h"
+#include "solib.h"
#ifdef USE_LDR_ROUTINES
# include <loader.h>
CORE_ADDR previous;
CORE_ADDR unknown1;
CORE_ADDR module_name;
- CORE_ADDR modinfo_addr; /* used by next_link_map_member() to detect
- the end of the shared module list */
+ CORE_ADDR modinfo_addr; /* Used by next_link_map_member() to detect
+ the end of the shared module list. */
long module_id;
CORE_ADDR unknown2;
CORE_ADDR unknown3;
lm_sec_cmp (const void *p1, const void *p2)
{
const struct lm_sec *lms1 = p1, *lms2 = p2;
+
return strcmp (lms1->name, lms2->name);
}
target_read_string (lms->nameaddr, &name, PATH_MAX, &errcode);
if (errcode != 0)
{
- warning (_("unable to read shared sec name at 0x%lx"), lms->nameaddr);
+ warning (_("unable to read shared sec name at 0x%lx"),
+ lms->nameaddr);
name = xstrdup ("");
}
lms->name = name;
static void
osf_relocate_section_addresses (struct so_list *so,
- struct section_table *sec)
+ struct target_section *sec)
{
struct lm_info *lmi;
struct lm_sec lms_key, *lms;
instructions.
For a statically bound executable, the inferior's first instruction is the
- one at "_start", or a similar text label. No further processing is needed
+ one at "_start", or a similar text label. No further processing is needed
in that case.
For a dynamically bound executable, this first instruction is somewhere
Also, what if child has exit()ed? Must exit loop somehow. */
static void
-osf_solib_create_inferior_hook (void)
+osf_solib_create_inferior_hook (int from_tty)
{
+ struct inferior *inf;
+ struct thread_info *tp;
+
+ inf = current_inferior ();
+
+ /* If we are attaching to the inferior, the shared libraries
+ have already been mapped, so nothing more to do. */
+ if (inf->attach_flag)
+ return;
+
/* Nothing to do for statically bound executables. */
if (symfile_objfile == NULL
/* Now run the target. It will eventually get a SIGTRAP, at
which point all of the libraries will have been mapped in and we
can go groveling around in the rld structures to find
- out what we need to know about them. */
+ out what we need to know about them.
+
+ If debugging from a core file, we cannot resume the execution
+ of the inferior. But this is actually not an issue, because
+ shared libraries have already been mapped anyways, which means
+ we have nothing more to do. */
+ if (!target_can_run (¤t_target))
+ return;
+ tp = inferior_thread ();
clear_proceed_status ();
- stop_soon = STOP_QUIETLY;
- stop_signal = TARGET_SIGNAL_0;
+ inf->control.stop_soon = STOP_QUIETLY;
+ tp->suspend.stop_signal = TARGET_SIGNAL_0;
do
{
- target_resume (minus_one_ptid, 0, stop_signal);
+ target_resume (minus_one_ptid, 0, tp->suspend.stop_signal);
wait_for_inferior ();
}
- while (stop_signal != TARGET_SIGNAL_TRAP);
+ while (tp->suspend.stop_signal != TARGET_SIGNAL_TRAP);
/* solib_add will call reinit_frame_cache.
But we are stopped in the runtime loader and we do not have symbols
- for the runtime loader. So heuristic_proc_start will be called
+ for the runtime loader. So heuristic_proc_start will be called
and will put out an annoying warning.
Delaying the resetting of stop_soon until after symbol loading
suppresses the warning. */
solib_add ((char *) 0, 0, (struct target_ops *) 0, auto_solib_add);
- stop_soon = NO_STOP_QUIETLY;
-
- /* Enable breakpoints disabled (unnecessarily) by clear_solib(). */
- re_enable_breakpoints_in_shlibs ();
+ inf->control.stop_soon = NO_STOP_QUIETLY;
}
/* target_so_ops callback. Do additional symbol handling, lookup, etc. after
memcpy (so->so_name, so->so_original_name, namelen + 1);
/* Allocate section space. */
- so->lm_info = xmalloc ((unsigned) &(((struct lm_info *)0)->secs) +
- nsecs * sizeof *so->lm_info);
+ so->lm_info = xmalloc (sizeof (struct lm_info)
+ + (nsecs - 1) * sizeof (struct lm_sec));
so->lm_info->isloader = isloader;
so->lm_info->nsecs = nsecs;
for (i = 0; i < nsecs; i++)
static struct so_list *
osf_current_sos (void)
{
- struct so_list *head = NULL, *tail, *newtail, so;
+ struct so_list *head = NULL, *tail = NULL, *newtail, so;
struct read_map_ctxt ctxt;
int skipped_main;
int found;
if (symfile_objfile)
- if (!query ("Attempt to reload symbols from process? "))
+ if (!query (_("Attempt to reload symbols from process? ")))
return 0;
/* The first module after /sbin/loader is the main program. */
static int
osf_in_dynsym_resolve_code (CORE_ADDR pc)
{
- /* This function currently always return False. This is a temporary
+ /* This function currently always return False. This is a temporary
solution which only consequence is to introduce a minor incovenience
for the user: When stepping inside a subprogram located in a shared
library, gdb might stop inside the dynamic loader code instead of
- inside the subprogram itself. See the explanations in infrun.c about
- the IN_SOLIB_DYNSYM_RESOLVE_CODE macro for more details. */
+ inside the subprogram itself. See the explanations in infrun.c about
+ the in_solib_dynsym_resolve_code() function for more details. */
return 0;
}
osf_so_ops.current_sos = osf_current_sos;
osf_so_ops.open_symbol_file_object = osf_open_symbol_file_object;
osf_so_ops.in_dynsym_resolve_code = osf_in_dynsym_resolve_code;
+ osf_so_ops.bfd_open = solib_bfd_open;
- /* FIXME: Don't do this here. *_gdbarch_init() should set so_ops. */
+ /* FIXME: Don't do this here. *_gdbarch_init() should set so_ops. */
current_target_so_ops = &osf_so_ops;
}
projects / deliverable / binutils-gdb.git / blobdiff