/* Read HP PA/Risc object files for GDB.
- Copyright 1991, 1992, 1996, 1999 Free Software Foundation, Inc.
+ Copyright 1991, 1992, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002,
+ 2004 Free Software Foundation, Inc.
Written by Fred Fish at Cygnus Support.
This file is part of GDB.
/* Various things we might complain about... */
+static int init_import_symbols (struct objfile *objfile);
+
static void som_symfile_init (struct objfile *);
static void som_new_init (struct objfile *);
static void som_symfile_finish (struct objfile *);
-static void
-som_symtab_read (bfd *, struct objfile *, struct section_offsets *);
+static void som_symtab_read (bfd *, struct objfile *,
+ struct section_offsets *);
-static void
-som_symfile_offsets (struct objfile *, struct section_addr_info *);
+static void som_symfile_offsets (struct objfile *, struct section_addr_info *);
/* FIXME: These should really be in a common header somewhere */
number_of_symbols = bfd_get_symcount (abfd);
+ /* FIXME (alloca): could be quite large. */
buf = alloca (symsize * number_of_symbols);
bfd_seek (abfd, obj_som_sym_filepos (abfd), SEEK_SET);
- val = bfd_read (buf, symsize * number_of_symbols, 1, abfd);
+ val = bfd_bread (buf, symsize * number_of_symbols, abfd);
if (val != symsize * number_of_symbols)
error ("Couldn't read symbol dictionary!");
+ /* FIXME (alloca): could be quite large. */
stringtab = alloca (obj_som_stringtab_size (abfd));
bfd_seek (abfd, obj_som_str_filepos (abfd), SEEK_SET);
- val = bfd_read (stringtab, obj_som_stringtab_size (abfd), 1, abfd);
+ val = bfd_bread (stringtab, obj_som_stringtab_size (abfd), abfd);
if (val != obj_som_stringtab_size (abfd))
error ("Can't read in HP string table.");
can do the right thing for ST_ENTRY vs ST_CODE symbols).
There's nothing in the header which easily allows us to do
- this. The only reliable way I know of is to check for the
- existance of a $SHLIB_INFO$ section with a non-zero size. */
- /* The code below is not a reliable way to check whether an
- * executable is dynamic, so I commented it out - RT
- * shlib_info = bfd_get_section_by_name (objfile->obfd, "$SHLIB_INFO$");
- * if (shlib_info)
- * dynamic = (bfd_section_size (objfile->obfd, shlib_info) != 0);
- * else
- * dynamic = 0;
- */
- /* I replaced the code with a simple check for text offset not being
- * zero. Still not 100% reliable, but a more reliable way of asking
- * "is this a dynamic executable?" than the above. RT
- */
+ this.
+
+ This code used to rely upon the existence of a $SHLIB_INFO$
+ section to make this determination. HP claims that it is
+ more accurate to check for a nonzero text offset, but they
+ have not provided any information about why that test is
+ more accurate. */
dynamic = (text_offset != 0);
endbufp = buf + number_of_symbols;
symname = bufp->name.n_strx + stringtab;
ms_type = mst_text;
bufp->symbol_value += text_offset;
-#ifdef SMASH_TEXT_ADDRESS
- SMASH_TEXT_ADDRESS (bufp->symbol_value);
-#endif
+ bufp->symbol_value = SMASH_TEXT_ADDRESS (bufp->symbol_value);
break;
case ST_ENTRY:
else
ms_type = mst_text;
bufp->symbol_value += text_offset;
-#ifdef SMASH_TEXT_ADDRESS
- SMASH_TEXT_ADDRESS (bufp->symbol_value);
-#endif
+ bufp->symbol_value = SMASH_TEXT_ADDRESS (bufp->symbol_value);
break;
case ST_STUB:
symname = bufp->name.n_strx + stringtab;
ms_type = mst_solib_trampoline;
bufp->symbol_value += text_offset;
-#ifdef SMASH_TEXT_ADDRESS
- SMASH_TEXT_ADDRESS (bufp->symbol_value);
-#endif
+ bufp->symbol_value = SMASH_TEXT_ADDRESS (bufp->symbol_value);
break;
case ST_DATA:
symname = bufp->name.n_strx + stringtab;
ms_type = mst_file_text;
bufp->symbol_value += text_offset;
-#ifdef SMASH_TEXT_ADDRESS
- SMASH_TEXT_ADDRESS (bufp->symbol_value);
-#endif
+ bufp->symbol_value = SMASH_TEXT_ADDRESS (bufp->symbol_value);
check_strange_names:
/* Utah GCC 2.5, FSF GCC 2.6 and later generate correct local
symname = bufp->name.n_strx + stringtab;
ms_type = mst_file_text;
bufp->symbol_value += text_offset;
-#ifdef SMASH_TEXT_ADDRESS
- SMASH_TEXT_ADDRESS (bufp->symbol_value);
-#endif
+ bufp->symbol_value = SMASH_TEXT_ADDRESS (bufp->symbol_value);
break;
case ST_ENTRY:
symname = bufp->name.n_strx + stringtab;
- /* For a dynamic executable, ST_ENTRY symbols are
- the stubs, while the ST_CODE symbol is the real
- function. */
- if (dynamic)
- ms_type = mst_solib_trampoline;
- else
- ms_type = mst_file_text;
+ /* SS_LOCAL symbols in a shared library do not have
+ export stubs, so we do not have to worry about
+ using mst_file_text vs mst_solib_trampoline here like
+ we do for SS_UNIVERSAL and SS_EXTERNAL symbols above. */
+ ms_type = mst_file_text;
bufp->symbol_value += text_offset;
-#ifdef SMASH_TEXT_ADDRESS
- SMASH_TEXT_ADDRESS (bufp->symbol_value);
-#endif
+ bufp->symbol_value = SMASH_TEXT_ADDRESS (bufp->symbol_value);
break;
case ST_STUB:
symname = bufp->name.n_strx + stringtab;
ms_type = mst_solib_trampoline;
bufp->symbol_value += text_offset;
-#ifdef SMASH_TEXT_ADDRESS
- SMASH_TEXT_ADDRESS (bufp->symbol_value);
-#endif
+ bufp->symbol_value = SMASH_TEXT_ADDRESS (bufp->symbol_value);
break;
som_symtab_read (abfd, objfile, objfile->section_offsets);
+ /* Install any minimal symbols that have been collected as the current
+ minimal symbols for this objfile.
+ Further symbol-reading is done incrementally, file-by-file,
+ in a step known as "psymtab-to-symtab" expansion. hp-symtab-read.c
+ contains the code to do the actual DNTT scanning and symtab building. */
+ install_minimal_symbols (objfile);
+ do_cleanups (back_to);
+
/* Now read information from the stabs debug sections.
This is a no-op for SOM.
Perhaps it is intended for some kind of mixed STABS/SOM
together with a scan of the GNTT. See hp-psymtab-read.c. */
hpread_build_psymtabs (objfile, mainline);
- /* Install any minimal symbols that have been collected as the current
- minimal symbols for this objfile.
- Further symbol-reading is done incrementally, file-by-file,
- in a step known as "psymtab-to-symtab" expansion. hp-symtab-read.c
- contains the code to do the actual DNTT scanning and symtab building. */
- install_minimal_symbols (objfile);
-
/* Force hppa-tdep.c to re-read the unwind descriptors. */
objfile->obj_private = NULL;
- do_cleanups (back_to);
}
/* Initialize anything that needs initializing when a completely new symbol
{
if (objfile->sym_stab_info != NULL)
{
- mfree (objfile->md, objfile->sym_stab_info);
+ xmfree (objfile->md, objfile->sym_stab_info);
}
hpread_symfile_finish (objfile);
}
int i;
CORE_ADDR text_addr;
- objfile->num_sections = SECT_OFF_MAX;
+ objfile->num_sections = bfd_count_sections (objfile->obfd);
objfile->section_offsets = (struct section_offsets *)
- obstack_alloc (&objfile->psymbol_obstack, SIZEOF_SECTION_OFFSETS);
+ obstack_alloc (&objfile->objfile_obstack,
+ SIZEOF_N_SECTION_OFFSETS (objfile->num_sections));
/* FIXME: ezannoni 2000-04-20 The section names in SOM are not
.text, .data, etc, but $TEXT$, $DATA$,... We should initialize
/* Note: Here is OK to compare with ".text" because this is the
name that gdb itself gives to that section, not the SOM
name. */
- for (i = 0; i < SECT_OFF_MAX && addrs->other[i].name; i++)
+ for (i = 0; i < objfile->num_sections && addrs->other[i].name; i++)
if (strcmp (addrs->other[i].name, ".text") == 0)
break;
text_addr = addrs->other[i].addr;
- for (i = 0; i < SECT_OFF_MAX; i++)
- ANOFFSET (objfile->section_offsets, i) = text_addr;
+ for (i = 0; i < objfile->num_sections; i++)
+ (objfile->section_offsets)->offsets[i] = text_addr;
}
}
not defined there. (Variables that are imported are dealt
with as "loc_indirect" vars.)
Return value = number of import symbols read in. */
-int
+static int
init_import_symbols (struct objfile *objfile)
{
unsigned int import_list;
unsigned int string_table;
unsigned int string_table_size;
char *string_buffer;
- register int i;
- register int j;
- register int k;
+ int i;
+ int j;
+ int k;
asection *text_section; /* section handle */
unsigned int dl_header[12]; /* SOM executable header */
to do with psymbols, just a matter of convenience. We want the
import list to be freed when the objfile is deallocated */
objfile->import_list
- = (ImportEntry *) obstack_alloc (&objfile->psymbol_obstack,
+ = (ImportEntry *) obstack_alloc (&objfile->objfile_obstack,
import_list_size * sizeof (ImportEntry));
/* Read in the import entries, a bunch at a time */
if (buffer[i].type != (unsigned char) 0)
{
objfile->import_list[k]
- = (char *) obstack_alloc (&objfile->psymbol_obstack, strlen (string_buffer + buffer[i].name) + 1);
+ = (char *) obstack_alloc (&objfile->objfile_obstack, strlen (string_buffer + buffer[i].name) + 1);
strcpy (objfile->import_list[k], string_buffer + buffer[i].name);
/* Some day we might want to record the type and other information too */
}
if (buffer[i].type != (unsigned char) 0)
{
objfile->import_list[k]
- = (char *) obstack_alloc (&objfile->psymbol_obstack, strlen (string_buffer + buffer[i].name) + 1);
+ = (char *) obstack_alloc (&objfile->objfile_obstack, strlen (string_buffer + buffer[i].name) + 1);
strcpy (objfile->import_list[k], string_buffer + buffer[i].name);
/* Some day we might want to record the type and other information too */
}
}
objfile->import_list_size = import_list_size;
- free (string_buffer);
+ xfree (string_buffer);
return import_list_size;
}
unsigned int string_table;
unsigned int string_table_size;
char *string_buffer;
- register int i;
- register int j;
- register int k;
+ int i;
+ int j;
+ int k;
asection *text_section; /* section handle */
unsigned int dl_header[12]; /* SOM executable header */
to do with psymbols, just a matter of convenience. We want the
export list to be freed when the objfile is deallocated */
objfile->export_list
- = (ExportEntry *) obstack_alloc (&objfile->psymbol_obstack,
+ = (ExportEntry *) obstack_alloc (&objfile->objfile_obstack,
export_list_size * sizeof (ExportEntry));
/* Read in the export entries, a bunch at a time */
if (buffer[i].type != (unsigned char) 0)
{
objfile->export_list[k].name
- = (char *) obstack_alloc (&objfile->psymbol_obstack, strlen (string_buffer + buffer[i].name) + 1);
+ = (char *) obstack_alloc (&objfile->objfile_obstack, strlen (string_buffer + buffer[i].name) + 1);
strcpy (objfile->export_list[k].name, string_buffer + buffer[i].name);
objfile->export_list[k].address = buffer[i].value;
/* Some day we might want to record the type and other information too */
if (buffer[i].type != (unsigned char) 0)
{
objfile->export_list[k].name
- = (char *) obstack_alloc (&objfile->psymbol_obstack, strlen (string_buffer + buffer[i].name) + 1);
+ = (char *) obstack_alloc (&objfile->objfile_obstack, strlen (string_buffer + buffer[i].name) + 1);
strcpy (objfile->export_list[k].name, string_buffer + buffer[i].name);
/* Some day we might want to record the type and other information too */
objfile->export_list[k].address = buffer[i].value;
}
objfile->export_list_size = export_list_size;
- free (string_buffer);
+ xfree (string_buffer);
return export_list_size;
}
\f
projects / deliverable / binutils-gdb.git / blobdiff