/* Generic symbol file reading for the GNU debugger, GDB.
Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
- 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
+ 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Free Software Foundation, Inc.
Contributed by Cygnus Support, using pieces from other GDB modules.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor,
- Boston, MA 02110-1301, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include "bfdlink.h"
#include "language.h"
#include "complaints.h"
#include "demangle.h"
-#include "inferior.h" /* for write_pc */
+#include "inferior.h"
+#include "regcache.h"
#include "filenames.h" /* for DOSish file names */
#include "gdb-stabs.h"
#include "gdb_obstack.h"
#include "exec.h"
#include "parser-defs.h"
#include "varobj.h"
+#include "elf-bfd.h"
+#include "solib.h"
+#include "remote.h"
#include <sys/types.h>
#include <fcntl.h>
static void simple_free_overlay_region_table (void);
#endif
-static void set_initial_language (void);
-
static void load_command (char *, int);
static void symbol_file_add_main_1 (char *args, int from_tty, int flags);
static void add_symbol_file_command (char *, int);
-static void add_shared_symbol_files_command (char *, int);
-
static void reread_separate_symbols (struct objfile *objfile);
static void cashier_psymtab (struct partial_symtab *);
int get_section_index (struct objfile *, char *);
-static void find_sym_fns (struct objfile *);
+static struct sym_fns *find_sym_fns (bfd *);
static void decrement_reading_symtab (void *);
static void overlay_invalidate_all (void);
-static int overlay_is_mapped (struct obj_section *);
-
void list_overlays_command (char *, int);
void map_overlay_command (char *, int);
static void simple_free_overlay_table (void);
-static void read_target_long_array (CORE_ADDR, unsigned int *, int);
+static void read_target_long_array (CORE_ADDR, unsigned int *, int, int);
static int simple_read_overlay_table (void);
static void init_filename_language_table (void);
+static void symfile_find_segment_sections (struct objfile *objfile);
+
void _initialize_symfile (void);
/* List of all available sym_fns. On gdb startup, each object file reader
value);
}
+/* If non-zero, gdb will notify the user when it is loading symbols
+ from a file. This is almost always what users will want to have happen;
+ but for programs with lots of dynamically linked libraries, the output
+ can be more noise than signal. */
+
+int print_symbol_loading = 1;
/* If non-zero, shared library symbols will be added automatically
when the inferior is created, new libraries are loaded, or when
an existing section table. */
extern struct section_addr_info *
-build_section_addr_info_from_section_table (const struct section_table *start,
- const struct section_table *end)
+build_section_addr_info_from_section_table (const struct target_section *start,
+ const struct target_section *end)
{
struct section_addr_info *sap;
- const struct section_table *stp;
+ const struct target_section *stp;
int oidx;
sap = alloc_section_addr_info (end - start);
/* This is where things get really weird... We MUST have valid
indices for the various sect_index_* members or gdb will abort.
So if for example, there is no ".text" section, we have to
- accomodate that. Except when explicitly adding symbol files at
- some address, section_offsets contains nothing but zeros, so it
- doesn't matter which slot in section_offsets the individual
- sect_index_* members index into. So if they are all zero, it is
- safe to just point all the currently uninitialized indices to the
- first slot. */
+ accomodate that. First, check for a file with the standard
+ one or two segments. */
+
+ symfile_find_segment_sections (objfile);
+
+ /* Except when explicitly adding symbol files at some address,
+ section_offsets contains nothing but zeros, so it doesn't matter
+ which slot in section_offsets the individual sect_index_* members
+ index into. So if they are all zero, it is safe to just point
+ all the currently uninitialized indices to the first slot. But
+ beware: if this is the main executable, it may be relocated
+ later, e.g. by the remote qOffsets packet, and then this will
+ be wrong! That's why we try segments first. */
for (i = 0; i < objfile->num_sections; i++)
{
/* Find a unique offset to use for loadable section SECT if
the user did not provide an offset. */
-void
+static void
place_section (bfd *abfd, asection *sect, void *obj)
{
struct place_section_arg *arg = obj;
offsets[sect->index] = start_addr;
arg->lowest = start_addr + bfd_get_section_size (sect);
-
- exec_set_section_address (bfd_get_filename (abfd), sect->index, start_addr);
}
/* Parse the user's idea of an offset for dynamic linking, into our idea
continue;
bfd_set_section_vma (abfd, cur_sec, offsets[cur_sec->index]);
+ exec_set_section_address (bfd_get_filename (abfd), cur_sec->index,
+ offsets[cur_sec->index]);
offsets[cur_sec->index] = 0;
}
}
}
+/* Divide the file into segments, which are individual relocatable units.
+ This is the default version of the sym_fns.sym_segments function for
+ symbol readers that do not have an explicit representation of segments.
+ It assumes that object files do not have segments, and fully linked
+ files have a single segment. */
+
+struct symfile_segment_data *
+default_symfile_segments (bfd *abfd)
+{
+ int num_sections, i;
+ asection *sect;
+ struct symfile_segment_data *data;
+ CORE_ADDR low, high;
+
+ /* Relocatable files contain enough information to position each
+ loadable section independently; they should not be relocated
+ in segments. */
+ if ((bfd_get_file_flags (abfd) & (EXEC_P | DYNAMIC)) == 0)
+ return NULL;
+
+ /* Make sure there is at least one loadable section in the file. */
+ for (sect = abfd->sections; sect != NULL; sect = sect->next)
+ {
+ if ((bfd_get_section_flags (abfd, sect) & SEC_ALLOC) == 0)
+ continue;
+
+ break;
+ }
+ if (sect == NULL)
+ return NULL;
+
+ low = bfd_get_section_vma (abfd, sect);
+ high = low + bfd_get_section_size (sect);
+
+ data = XZALLOC (struct symfile_segment_data);
+ data->num_segments = 1;
+ data->segment_bases = XCALLOC (1, CORE_ADDR);
+ data->segment_sizes = XCALLOC (1, CORE_ADDR);
+
+ num_sections = bfd_count_sections (abfd);
+ data->segment_info = XCALLOC (num_sections, int);
+
+ for (i = 0, sect = abfd->sections; sect != NULL; i++, sect = sect->next)
+ {
+ CORE_ADDR vma;
+
+ if ((bfd_get_section_flags (abfd, sect) & SEC_ALLOC) == 0)
+ continue;
+
+ vma = bfd_get_section_vma (abfd, sect);
+ if (vma < low)
+ low = vma;
+ if (vma + bfd_get_section_size (sect) > high)
+ high = vma + bfd_get_section_size (sect);
+
+ data->segment_info[i] = 1;
+ }
+
+ data->segment_bases[0] = low;
+ data->segment_sizes[0] = high - low;
+
+ return data;
+}
+
/* Process a symbol file, as either the main file or as a dynamically
loaded file.
list any more; all we have is the section offset table.) If
OFFSETS is non-zero, ADDRS must be zero.
- MAINLINE is nonzero if this is the main symbol file, or zero if
- it's an extra symbol file such as dynamically loaded code.
-
- VERBO is nonzero if the caller has printed a verbose message about
- the symbol reading (and complaints can be more terse about it). */
+ ADD_FLAGS encodes verbosity level, whether this is main symbol or
+ an extra symbol file such as dynamically loaded code, and wether
+ breakpoint reset should be deferred. */
void
syms_from_objfile (struct objfile *objfile,
struct section_addr_info *addrs,
struct section_offsets *offsets,
int num_offsets,
- int mainline,
- int verbo)
+ int add_flags)
{
struct section_addr_info *local_addr = NULL;
struct cleanup *old_chain;
+ const int mainline = add_flags & SYMFILE_MAINLINE;
gdb_assert (! (addrs && offsets));
init_entry_point_info (objfile);
- find_sym_fns (objfile);
+ objfile->sf = find_sym_fns (objfile->obfd);
if (objfile->sf == NULL)
return; /* No symbols. */
bfd_map_over_sections (objfile->obfd, find_lowest_section,
&lower_sect);
if (lower_sect == NULL)
- warning (_("no loadable sections found in added symbol-file %s"),
- objfile->name);
- else
- if ((bfd_get_section_flags (objfile->obfd, lower_sect) & SEC_CODE) == 0)
- warning (_("Lowest section in %s is %s at %s"),
- objfile->name,
- bfd_section_name (objfile->obfd, lower_sect),
- paddr (bfd_section_vma (objfile->obfd, lower_sect)));
- if (lower_sect != NULL)
- lower_offset = bfd_section_vma (objfile->obfd, lower_sect);
+ {
+ warning (_("no loadable sections found in added symbol-file %s"),
+ objfile->name);
+ lower_offset = 0;
+ }
else
- lower_offset = 0;
+ lower_offset = bfd_section_vma (objfile->obfd, lower_sect);
/* Calculate offsets for the loadable sections.
FIXME! Sections must be in order of increasing loadable section
initial symbol reading for this file. */
(*objfile->sf->sym_init) (objfile);
- clear_complaints (&symfile_complaints, 1, verbo);
+ clear_complaints (&symfile_complaints, 1, add_flags & SYMFILE_VERBOSE);
if (addrs)
(*objfile->sf->sym_offsets) (objfile, addrs);
init_objfile_sect_indices (objfile);
}
-#ifndef DEPRECATED_IBM6000_TARGET
- /* This is a SVR4/SunOS specific hack, I think. In any event, it
- screws RS/6000. sym_offsets should be doing this sort of thing,
- because it knows the mapping between bfd sections and
- section_offsets. */
- /* This is a hack. As far as I can tell, section offsets are not
- target dependent. They are all set to addr with a couple of
- exceptions. The exceptions are sysvr4 shared libraries, whose
- offsets are kept in solib structures anyway and rs6000 xcoff
- which handles shared libraries in a completely unique way.
-
- Section offsets are built similarly, except that they are built
- by adding addr in all cases because there is no clear mapping
- from section_offsets into actual sections. Note that solib.c
- has a different algorithm for finding section offsets.
-
- These should probably all be collapsed into some target
- independent form of shared library support. FIXME. */
-
- if (addrs)
- {
- struct obj_section *s;
-
- /* Map section offsets in "addr" back to the object's
- sections by comparing the section names with bfd's
- section names. Then adjust the section address by
- the offset. */ /* for gdb/13815 */
-
- ALL_OBJFILE_OSECTIONS (objfile, s)
- {
- CORE_ADDR s_addr = 0;
- int i;
-
- for (i = 0;
- !s_addr && i < addrs->num_sections && addrs->other[i].name;
- i++)
- if (strcmp (bfd_section_name (s->objfile->obfd,
- s->the_bfd_section),
- addrs->other[i].name) == 0)
- s_addr = addrs->other[i].addr; /* end added for gdb/13815 */
-
- s->addr -= s->offset;
- s->addr += s_addr;
- s->endaddr -= s->offset;
- s->endaddr += s_addr;
- s->offset += s_addr;
- }
- }
-#endif /* not DEPRECATED_IBM6000_TARGET */
-
(*objfile->sf->sym_read) (objfile, mainline);
- /* Don't allow char * to have a typename (else would get caddr_t).
- Ditto void *. FIXME: Check whether this is now done by all the
- symbol readers themselves (many of them now do), and if so remove
- it from here. */
-
- TYPE_NAME (lookup_pointer_type (builtin_type_char)) = 0;
- TYPE_NAME (lookup_pointer_type (builtin_type_void)) = 0;
-
- /* Mark the objfile has having had initial symbol read attempted. Note
- that this does not mean we found any symbols... */
-
- objfile->flags |= OBJF_SYMS;
-
/* Discard cleanups as symbol reading was successful. */
discard_cleanups (old_chain);
+ xfree (local_addr);
}
/* Perform required actions after either reading in the initial
objfile. */
void
-new_symfile_objfile (struct objfile *objfile, int mainline, int verbo)
+new_symfile_objfile (struct objfile *objfile, int add_flags)
{
/* If this is the main symbol file we have to clean up all users of the
old main symbol file. Otherwise it is sufficient to fixup all the
breakpoints that may have been redefined by this symbol file. */
- if (mainline)
+ if (add_flags & SYMFILE_MAINLINE)
{
/* OK, make it the "real" symbol file. */
symfile_objfile = objfile;
clear_symtab_users ();
}
- else
+ else if ((add_flags & SYMFILE_DEFER_BP_RESET) == 0)
{
breakpoint_re_set ();
}
/* We're done reading the symbol file; finish off complaints. */
- clear_complaints (&symfile_complaints, 0, verbo);
+ clear_complaints (&symfile_complaints, 0, add_flags & SYMFILE_VERBOSE);
}
/* Process a symbol file, as either the main file or as a dynamically
ABFD is a BFD already open on the file, as from symfile_bfd_open.
This BFD will be closed on error, and is always consumed by this function.
- FROM_TTY says how verbose to be.
-
- MAINLINE specifies whether this is the main symbol file, or whether
- it's an extra symbol file such as dynamically loaded code.
+ ADD_FLAGS encodes verbosity, whether this is main symbol file or
+ extra, such as dynamically loaded code, and what to do with breakpoins.
ADDRS, OFFSETS, and NUM_OFFSETS are as described for
- syms_from_objfile, above. ADDRS is ignored when MAINLINE is
- non-zero.
+ syms_from_objfile, above.
+ ADDRS is ignored when SYMFILE_MAINLINE bit is set in ADD_FLAGS.
Upon success, returns a pointer to the objfile that was added.
Upon failure, jumps back to command level (never returns). */
+
static struct objfile *
-symbol_file_add_with_addrs_or_offsets (bfd *abfd, int from_tty,
+symbol_file_add_with_addrs_or_offsets (bfd *abfd,
+ int add_flags,
struct section_addr_info *addrs,
struct section_offsets *offsets,
int num_offsets,
- int mainline, int flags)
+ int flags)
{
struct objfile *objfile;
struct partial_symtab *psymtab;
- char *debugfile;
+ char *debugfile = NULL;
struct section_addr_info *orig_addrs = NULL;
struct cleanup *my_cleanups;
const char *name = bfd_get_filename (abfd);
+ const int from_tty = add_flags & SYMFILE_VERBOSE;
my_cleanups = make_cleanup_bfd_close (abfd);
interactively wiping out any existing symbols. */
if ((have_full_symbols () || have_partial_symbols ())
- && mainline
+ && (add_flags & SYMFILE_MAINLINE)
&& from_tty
- && !query ("Load new symbol table from \"%s\"? ", name))
+ && !query (_("Load new symbol table from \"%s\"? "), name))
error (_("Not confirmed."));
objfile = allocate_objfile (abfd, flags);
deprecated_pre_add_symbol_hook (name);
else
{
- printf_unfiltered (_("Reading symbols from %s..."), name);
- wrap_here ("");
- gdb_flush (gdb_stdout);
+ if (print_symbol_loading)
+ {
+ printf_unfiltered (_("Reading symbols from %s..."), name);
+ wrap_here ("");
+ gdb_flush (gdb_stdout);
+ }
}
}
syms_from_objfile (objfile, addrs, offsets, num_offsets,
- mainline, from_tty);
+ add_flags);
/* We now have at least a partial symbol table. Check to see if the
user requested that all symbols be read on initial access via either
if ((flags & OBJF_READNOW) || readnow_symbol_files)
{
- if (from_tty || info_verbose)
+ if ((from_tty || info_verbose) && print_symbol_loading)
{
printf_unfiltered (_("expanding to full symbols..."));
wrap_here ("");
}
}
- debugfile = find_separate_debug_file (objfile);
+ /* If the file has its own symbol tables it has no separate debug info.
+ `.dynsym'/`.symtab' go to MSYMBOLS, `.debug_info' goes to SYMTABS/PSYMTABS.
+ `.gnu_debuglink' may no longer be present with `.note.gnu.build-id'. */
+ if (objfile->psymtabs == NULL)
+ debugfile = find_separate_debug_file (objfile);
if (debugfile)
{
if (addrs != NULL)
{
objfile->separate_debug_objfile
- = symbol_file_add (debugfile, from_tty, orig_addrs, 0, flags);
+ = symbol_file_add (debugfile, add_flags, orig_addrs, flags);
}
else
{
objfile->separate_debug_objfile
- = symbol_file_add (debugfile, from_tty, NULL, 0, flags);
+ = symbol_file_add (debugfile, add_flags, NULL, flags);
}
objfile->separate_debug_objfile->separate_debug_objfile_backlink
= objfile;
xfree (debugfile);
}
- if (!have_partial_symbols () && !have_full_symbols ())
+ if (!have_partial_symbols () && !have_full_symbols ()
+ && print_symbol_loading)
{
wrap_here ("");
- printf_filtered (_("(no debugging symbols found)"));
+ printf_unfiltered (_("(no debugging symbols found)"));
if (from_tty || info_verbose)
- printf_filtered ("...");
+ printf_unfiltered ("...");
else
- printf_filtered ("\n");
+ printf_unfiltered ("\n");
wrap_here ("");
}
deprecated_post_add_symbol_hook ();
else
{
- printf_unfiltered (_("done.\n"));
+ if (print_symbol_loading)
+ printf_unfiltered (_("done.\n"));
}
}
if (objfile->sf == NULL)
return objfile; /* No symbols. */
- new_symfile_objfile (objfile, mainline, from_tty);
+ new_symfile_objfile (objfile, add_flags);
observer_notify_new_objfile (objfile);
See symbol_file_add_with_addrs_or_offsets's comments for
details. */
struct objfile *
-symbol_file_add_from_bfd (bfd *abfd, int from_tty,
+symbol_file_add_from_bfd (bfd *abfd, int add_flags,
struct section_addr_info *addrs,
- int mainline, int flags)
+ int flags)
{
- return symbol_file_add_with_addrs_or_offsets (abfd,
- from_tty, addrs, 0, 0,
- mainline, flags);
+ return symbol_file_add_with_addrs_or_offsets (abfd, add_flags, addrs, 0, 0,
+ flags);
}
loaded file. See symbol_file_add_with_addrs_or_offsets's comments
for details. */
struct objfile *
-symbol_file_add (char *name, int from_tty, struct section_addr_info *addrs,
- int mainline, int flags)
+symbol_file_add (char *name, int add_flags, struct section_addr_info *addrs,
+ int flags)
{
- return symbol_file_add_from_bfd (symfile_bfd_open (name), from_tty,
- addrs, mainline, flags);
+ return symbol_file_add_from_bfd (symfile_bfd_open (name), add_flags, addrs,
+ flags);
}
static void
symbol_file_add_main_1 (char *args, int from_tty, int flags)
{
- symbol_file_add (args, from_tty, NULL, 1, flags);
+ const int add_flags = SYMFILE_MAINLINE | (from_tty ? SYMFILE_VERBOSE : 0);
+ symbol_file_add (args, add_flags, NULL, flags);
/* Getting new symbols may change our opinion about
what is frameless. */
symfile_objfile->name)
: !query (_("Discard symbol table? "))))
error (_("Not confirmed."));
- free_all_objfiles ();
-
- /* solib descriptors may have handles to objfiles. Since their
- storage has just been released, we'd better wipe the solib
- descriptors as well.
- */
-#if defined(SOLIB_RESTART)
- SOLIB_RESTART ();
-#endif
- symfile_objfile = NULL;
- if (from_tty)
- printf_unfiltered (_("No symbol file now.\n"));
+ free_all_objfiles ();
+
+ /* solib descriptors may have handles to objfiles. Since their
+ storage has just been released, we'd better wipe the solib
+ descriptors as well. */
+ no_shared_libraries (NULL, from_tty);
+
+ symfile_objfile = NULL;
+ if (from_tty)
+ printf_unfiltered (_("No symbol file now.\n"));
+}
+
+struct build_id
+ {
+ size_t size;
+ gdb_byte data[1];
+ };
+
+/* Locate NT_GNU_BUILD_ID from ABFD and return its content. */
+
+static struct build_id *
+build_id_bfd_get (bfd *abfd)
+{
+ struct build_id *retval;
+
+ if (!bfd_check_format (abfd, bfd_object)
+ || bfd_get_flavour (abfd) != bfd_target_elf_flavour
+ || elf_tdata (abfd)->build_id == NULL)
+ return NULL;
+
+ retval = xmalloc (sizeof *retval - 1 + elf_tdata (abfd)->build_id_size);
+ retval->size = elf_tdata (abfd)->build_id_size;
+ memcpy (retval->data, elf_tdata (abfd)->build_id, retval->size);
+
+ return retval;
+}
+
+/* Return if FILENAME has NT_GNU_BUILD_ID matching the CHECK value. */
+
+static int
+build_id_verify (const char *filename, struct build_id *check)
+{
+ bfd *abfd;
+ struct build_id *found = NULL;
+ int retval = 0;
+
+ /* We expect to be silent on the non-existing files. */
+ if (remote_filename_p (filename))
+ abfd = remote_bfd_open (filename, gnutarget);
+ else
+ abfd = bfd_openr (filename, gnutarget);
+ if (abfd == NULL)
+ return 0;
+
+ found = build_id_bfd_get (abfd);
+
+ if (found == NULL)
+ warning (_("File \"%s\" has no build-id, file skipped"), filename);
+ else if (found->size != check->size
+ || memcmp (found->data, check->data, found->size) != 0)
+ warning (_("File \"%s\" has a different build-id, file skipped"), filename);
+ else
+ retval = 1;
+
+ if (!bfd_close (abfd))
+ warning (_("cannot close \"%s\": %s"), filename,
+ bfd_errmsg (bfd_get_error ()));
+
+ xfree (found);
+
+ return retval;
+}
+
+static char *
+build_id_to_debug_filename (struct build_id *build_id)
+{
+ char *link, *s, *retval = NULL;
+ gdb_byte *data = build_id->data;
+ size_t size = build_id->size;
+
+ /* DEBUG_FILE_DIRECTORY/.build-id/ab/cdef */
+ link = xmalloc (strlen (debug_file_directory) + (sizeof "/.build-id/" - 1) + 1
+ + 2 * size + (sizeof ".debug" - 1) + 1);
+ s = link + sprintf (link, "%s/.build-id/", debug_file_directory);
+ if (size > 0)
+ {
+ size--;
+ s += sprintf (s, "%02x", (unsigned) *data++);
+ }
+ if (size > 0)
+ *s++ = '/';
+ while (size-- > 0)
+ s += sprintf (s, "%02x", (unsigned) *data++);
+ strcpy (s, ".debug");
+
+ /* lrealpath() is expensive even for the usually non-existent files. */
+ if (access (link, F_OK) == 0)
+ retval = lrealpath (link);
+ xfree (link);
+
+ if (retval != NULL && !build_id_verify (retval, build_id))
+ {
+ xfree (retval);
+ retval = NULL;
+ }
+
+ return retval;
}
static char *
separate_debug_file_exists (const char *name, unsigned long crc)
{
unsigned long file_crc = 0;
- int fd;
+ bfd *abfd;
gdb_byte buffer[8*1024];
int count;
- fd = open (name, O_RDONLY | O_BINARY);
- if (fd < 0)
+ if (remote_filename_p (name))
+ abfd = remote_bfd_open (name, gnutarget);
+ else
+ abfd = bfd_openr (name, gnutarget);
+
+ if (!abfd)
return 0;
- while ((count = read (fd, buffer, sizeof (buffer))) > 0)
+ while ((count = bfd_bread (buffer, sizeof (buffer), abfd)) > 0)
file_crc = gnu_debuglink_crc32 (file_crc, buffer, count);
- close (fd);
+ bfd_close (abfd);
return crc == file_crc;
}
bfd_size_type debuglink_size;
unsigned long crc32;
int i;
+ struct build_id *build_id;
+
+ build_id = build_id_bfd_get (objfile->obfd);
+ if (build_id != NULL)
+ {
+ char *build_id_name;
+
+ build_id_name = build_id_to_debug_filename (build_id);
+ xfree (build_id);
+ /* Prevent looping on a stripped .debug file. */
+ if (build_id_name != NULL && strcmp (build_id_name, objfile->name) == 0)
+ {
+ warning (_("\"%s\": separate debug info file has no debug info"),
+ build_id_name);
+ xfree (build_id_name);
+ }
+ else if (build_id_name != NULL)
+ return build_id_name;
+ }
basename = get_debug_link_info (objfile, &crc32);
}
else
{
- char **argv = buildargv (args);
+ char **argv = gdb_buildargv (args);
int flags = OBJF_USERLOADED;
struct cleanup *cleanups;
char *name = NULL;
- if (argv == NULL)
- nomem (0);
-
cleanups = make_cleanup_freeargv (argv);
while (*argv != NULL)
{
stabs we find, but we can't do that until later when we read in
full symbols. */
-static void
+void
set_initial_language (void)
{
struct partial_symtab *pst;
int desc;
char *absolute_name;
+ if (remote_filename_p (name))
+ {
+ name = xstrdup (name);
+ sym_bfd = remote_bfd_open (name, gnutarget);
+ if (!sym_bfd)
+ {
+ make_cleanup (xfree, name);
+ error (_("`%s': can't open to read symbols: %s."), name,
+ bfd_errmsg (bfd_get_error ()));
+ }
+
+ if (!bfd_check_format (sym_bfd, bfd_object))
+ {
+ bfd_close (sym_bfd);
+ make_cleanup (xfree, name);
+ error (_("`%s': can't read symbols: %s."), name,
+ bfd_errmsg (bfd_get_error ()));
+ }
+
+ return sym_bfd;
+ }
+
name = tilde_expand (name); /* Returns 1st new malloc'd copy. */
/* Look down path for it, allocate 2nd new malloc'd copy. */
desc = openp (getenv ("PATH"), OPF_TRY_CWD_FIRST, name,
- O_RDONLY | O_BINARY, 0, &absolute_name);
+ O_RDONLY | O_BINARY, &absolute_name);
#if defined(__GO32__) || defined(_WIN32) || defined (__CYGWIN__)
if (desc < 0)
{
char *exename = alloca (strlen (name) + 5);
strcat (strcpy (exename, name), ".exe");
desc = openp (getenv ("PATH"), OPF_TRY_CWD_FIRST, exename,
- O_RDONLY | O_BINARY, 0, &absolute_name);
+ O_RDONLY | O_BINARY, &absolute_name);
}
#endif
if (desc < 0)
{
close (desc);
make_cleanup (xfree, name);
- error (_("\"%s\": can't open to read symbols: %s."), name,
+ error (_("`%s': can't open to read symbols: %s."), name,
bfd_errmsg (bfd_get_error ()));
}
bfd_set_cacheable (sym_bfd, 1);
with the bfd). */
bfd_close (sym_bfd); /* This also closes desc. */
make_cleanup (xfree, name);
- error (_("\"%s\": can't read symbols: %s."), name,
+ error (_("`%s': can't read symbols: %s."), name,
bfd_errmsg (bfd_get_error ()));
}
struct sym_fns in the objfile structure, that contains cached
information about the symbol file. */
-static void
-find_sym_fns (struct objfile *objfile)
+static struct sym_fns *
+find_sym_fns (bfd *abfd)
{
struct sym_fns *sf;
- enum bfd_flavour our_flavour = bfd_get_flavour (objfile->obfd);
- char *our_target = bfd_get_target (objfile->obfd);
+ enum bfd_flavour our_flavour = bfd_get_flavour (abfd);
if (our_flavour == bfd_target_srec_flavour
|| our_flavour == bfd_target_ihex_flavour
|| our_flavour == bfd_target_tekhex_flavour)
- return; /* No symbols. */
+ return NULL; /* No symbols. */
for (sf = symtab_fns; sf != NULL; sf = sf->next)
- {
- if (our_flavour == sf->sym_flavour)
- {
- objfile->sf = sf;
- return;
- }
- }
+ if (our_flavour == sf->sym_flavour)
+ return sf;
error (_("I'm sorry, Dave, I can't do that. Symbol format `%s' unknown."),
- bfd_get_target (objfile->obfd));
+ bfd_get_target (abfd));
}
\f
static void
load_command (char *arg, int from_tty)
{
+ /* The user might be reloading because the binary has changed. Take
+ this opportunity to check. */
+ reopen_exec_file ();
+ reread_symbols ();
+
if (arg == NULL)
{
char *parg;
}
}
- /* The user might be reloading because the binary has changed. Take
- this opportunity to check. */
- reopen_exec_file ();
- reread_symbols ();
-
target_load (arg, from_tty);
/* After re-loading the executable, we don't really know which
make_cleanup (clear_memory_write_data, &cbdata.requests);
- argv = buildargv (args);
-
- if (argv == NULL)
- nomem(0);
+ if (args == NULL)
+ error_no_arg (_("file to load"));
+ argv = gdb_buildargv (args);
make_cleanup_freeargv (argv);
filename = tilde_expand (argv[0]);
ui_out_text (uiout, "\n");
/* We were doing this in remote-mips.c, I suspect it is right
for other targets too. */
- write_pc (entry);
+ regcache_write_pc (get_current_regcache (), entry);
/* FIXME: are we supposed to call symbol_file_add or not? According
to a comment from remote-mips.c (where a call to symbol_file_add
const struct timeval *start_time,
const struct timeval *end_time)
{
- unsigned long time_count;
+ ULONGEST time_count;
/* Compute the elapsed time in milliseconds, as a tradeoff between
accuracy and overflow. */
ui_out_text (uiout, "Transfer rate: ");
if (time_count > 0)
{
- ui_out_field_fmt (uiout, "transfer-rate", "%lu",
- 1000 * (data_count * 8) / time_count);
- ui_out_text (uiout, " bits/sec");
+ unsigned long rate = ((ULONGEST) data_count * 1000) / time_count;
+
+ if (ui_out_is_mi_like_p (uiout))
+ {
+ ui_out_field_fmt (uiout, "transfer-rate", "%lu", rate * 8);
+ ui_out_text (uiout, " bits/sec");
+ }
+ else if (rate < 1024)
+ {
+ ui_out_field_fmt (uiout, "transfer-rate", "%lu", rate);
+ ui_out_text (uiout, " bytes/sec");
+ }
+ else
+ {
+ ui_out_field_fmt (uiout, "transfer-rate", "%lu", rate / 1024);
+ ui_out_text (uiout, " KB/sec");
+ }
}
else
{
if (args == NULL)
error (_("add-symbol-file takes a file name and an address"));
- argv = buildargv (args);
+ argv = gdb_buildargv (args);
make_cleanup_freeargv (argv);
- if (argv == NULL)
- nomem (0);
-
for (arg = argv[0], argcnt = 0; arg != NULL; arg = argv[++argcnt])
{
/* Process the argument. */
entered on the command line. */
section_addrs->other[sec_num].name = sec;
section_addrs->other[sec_num].addr = addr;
- printf_unfiltered ("\t%s_addr = %s\n",
- sec, hex_string ((unsigned long)addr));
+ printf_unfiltered ("\t%s_addr = %s\n", sec, paddress (addr));
sec_num++;
/* The object's sections are initialized when a
if (from_tty && (!query ("%s", "")))
error (_("Not confirmed."));
- symbol_file_add (filename, from_tty, section_addrs, 0, flags);
+ symbol_file_add (filename, from_tty ? SYMFILE_VERBOSE : 0,
+ section_addrs, flags);
/* Getting new symbols may change our opinion about what is
frameless. */
do_cleanups (my_cleanups);
}
\f
-static void
-add_shared_symbol_files_command (char *args, int from_tty)
-{
-#ifdef ADD_SHARED_SYMBOL_FILES
- ADD_SHARED_SYMBOL_FILES (args, from_tty);
-#else
- error (_("This command is not available in this configuration of GDB."));
-#endif
-}
-\f
+
/* Re-read symbols if a symbol-file has changed. */
void
reread_symbols (void)
/* We need to do this whenever any symbols go away. */
make_cleanup (clear_symtab_users_cleanup, 0 /*ignore*/);
+ if (exec_bfd != NULL && strcmp (bfd_get_filename (objfile->obfd),
+ bfd_get_filename (exec_bfd)) == 0)
+ {
+ /* Reload EXEC_BFD without asking anything. */
+
+ exec_file_attach (bfd_get_filename (objfile->obfd), 0);
+ }
+
/* Clean up any state BFD has sitting around. We don't need
to close the descriptor but BFD lacks a way of closing the
BFD without closing the descriptor. */
if (!bfd_close (objfile->obfd))
error (_("Can't close BFD for %s: %s"), objfile->name,
bfd_errmsg (bfd_get_error ()));
- objfile->obfd = bfd_openr (obfd_filename, gnutarget);
+ if (remote_filename_p (obfd_filename))
+ objfile->obfd = remote_bfd_open (obfd_filename, gnutarget);
+ else
+ objfile->obfd = bfd_openr (obfd_filename, gnutarget);
if (objfile->obfd == NULL)
error (_("Can't open %s to read symbols."), objfile->name);
/* bfd_openr sets cacheable to true, which is what we want. */
/* Nuke all the state that we will re-read. Much of the following
code which sets things to NULL really is necessary to tell
- other parts of GDB that there is nothing currently there. */
+ other parts of GDB that there is nothing currently there.
+
+ Try to keep the freeing order compatible with free_objfile. */
+
+ if (objfile->sf != NULL)
+ {
+ (*objfile->sf->sym_finish) (objfile);
+ }
+
+ clear_objfile_data (objfile);
/* FIXME: Do we have to free a whole linked list, or is this
enough? */
objfile->sections = NULL;
objfile->symtabs = NULL;
objfile->psymtabs = NULL;
+ objfile->psymtabs_addrmap = NULL;
objfile->free_psymtabs = NULL;
objfile->cp_namespace_symtab = NULL;
objfile->msymbols = NULL;
sizeof (objfile->msymbol_hash));
memset (&objfile->msymbol_demangled_hash, 0,
sizeof (objfile->msymbol_demangled_hash));
- objfile->fundamental_types = NULL;
- clear_objfile_data (objfile);
- if (objfile->sf != NULL)
- {
- (*objfile->sf->sym_finish) (objfile);
- }
- /* We never make this a mapped file. */
- objfile->md = NULL;
objfile->psymbol_cache = bcache_xmalloc ();
objfile->macro_cache = bcache_xmalloc ();
/* obstack_init also initializes the obstack so it is
printf_unfiltered (_("(no debugging symbols found)\n"));
wrap_here ("");
}
- objfile->flags |= OBJF_SYMS;
/* We're done reading the symbol file; finish off complaints. */
clear_complaints (&symfile_complaints, 0, 1);
objfile->mtime = new_modtime;
reread_one = 1;
reread_separate_symbols (objfile);
+ init_entry_point_info (objfile);
}
}
}
clear_symtab_users ();
/* At least one objfile has changed, so we can consider that
the executable we're debugging has changed too. */
- observer_notify_executable_changed (NULL);
+ observer_notify_executable_changed ();
}
}
objfile->separate_debug_objfile
= (symbol_file_add_with_addrs_or_offsets
(symfile_bfd_open (debug_file),
- info_verbose, /* from_tty: Don't override the default. */
+ info_verbose ? SYMFILE_VERBOSE : 0,
0, /* No addr table. */
objfile->section_offsets, objfile->num_sections,
- 0, /* Not mainline. See comments about this above. */
objfile->flags & (OBJF_REORDERED | OBJF_SHARED | OBJF_READNOW
| OBJF_USERLOADED)));
objfile->separate_debug_objfile->separate_debug_objfile_backlink
= objfile;
}
+ if (debug_file)
+ xfree (debug_file);
}
add_filename_language (".f", language_fortran);
add_filename_language (".F", language_fortran);
add_filename_language (".s", language_asm);
+ add_filename_language (".sx", language_asm);
add_filename_language (".S", language_asm);
add_filename_language (".pas", language_pascal);
add_filename_language (".p", language_pascal);
return (psymtab);
}
\f
-/* Add a symbol with a long value to a psymtab.
- Since one arg is a struct, we pass in a ptr and deref it (sigh).
- Return the partial symbol that has been added. */
-
-/* NOTE: carlton/2003-09-11: The reason why we return the partial
- symbol is so that callers can get access to the symbol's demangled
- name, which they don't have any cheap way to determine otherwise.
- (Currenly, dwarf2read.c is the only file who uses that information,
- though it's possible that other readers might in the future.)
- Elena wasn't thrilled about that, and I don't blame her, but we
- couldn't come up with a better way to get that information. If
- it's needed in other situations, we could consider breaking up
- SYMBOL_SET_NAMES to provide access to the demangled name lookup
- cache. */
-
-const struct partial_symbol *
-add_psymbol_to_list (char *name, int namelength, domain_enum domain,
- enum address_class class,
- struct psymbol_allocation_list *list, long val, /* Value as a long */
- CORE_ADDR coreaddr, /* Value as a CORE_ADDR */
- enum language language, struct objfile *objfile)
+/* Helper function, initialises partial symbol structure and stashes
+ it into objfile's bcache. Note that our caching mechanism will
+ use all fields of struct partial_symbol to determine hash value of the
+ structure. In other words, having two symbols with the same name but
+ different domain (or address) is possible and correct. */
+
+static const struct partial_symbol *
+add_psymbol_to_bcache (char *name, int namelength, domain_enum domain,
+ enum address_class class,
+ long val, /* Value as a long */
+ CORE_ADDR coreaddr, /* Value as a CORE_ADDR */
+ enum language language, struct objfile *objfile,
+ int *added)
{
- struct partial_symbol *psym;
- char *buf = alloca (namelength + 1);
+ char *buf = name;
/* psymbol is static so that there will be no uninitialized gaps in the
structure which might contain random data, causing cache misses in
bcache. */
static struct partial_symbol psymbol;
-
- /* Create local copy of the partial symbol */
- memcpy (buf, name, namelength);
- buf[namelength] = '\0';
+
+ if (name[namelength] != '\0')
+ {
+ buf = alloca (namelength + 1);
+ /* Create local copy of the partial symbol */
+ memcpy (buf, name, namelength);
+ buf[namelength] = '\0';
+ }
/* val and coreaddr are mutually exclusive, one of them *will* be zero */
if (val != 0)
{
SYMBOL_SET_NAMES (&psymbol, buf, namelength, objfile);
/* Stash the partial symbol away in the cache */
- psym = deprecated_bcache (&psymbol, sizeof (struct partial_symbol),
- objfile->psymbol_cache);
+ return bcache_full (&psymbol, sizeof (struct partial_symbol),
+ objfile->psymbol_cache, added);
+}
- /* Save pointer to partial symbol in psymtab, growing symtab if needed. */
+/* Helper function, adds partial symbol to the given partial symbol
+ list. */
+
+static void
+append_psymbol_to_list (struct psymbol_allocation_list *list,
+ const struct partial_symbol *psym,
+ struct objfile *objfile)
+{
if (list->next >= list->list + list->size)
- {
- extend_psymbol_list (list, objfile);
- }
- *list->next++ = psym;
+ extend_psymbol_list (list, objfile);
+ *list->next++ = (struct partial_symbol *) psym;
OBJSTAT (objfile, n_psyms++);
+}
+
+/* Add a symbol with a long value to a psymtab.
+ Since one arg is a struct, we pass in a ptr and deref it (sigh).
+ Return the partial symbol that has been added. */
+/* NOTE: carlton/2003-09-11: The reason why we return the partial
+ symbol is so that callers can get access to the symbol's demangled
+ name, which they don't have any cheap way to determine otherwise.
+ (Currenly, dwarf2read.c is the only file who uses that information,
+ though it's possible that other readers might in the future.)
+ Elena wasn't thrilled about that, and I don't blame her, but we
+ couldn't come up with a better way to get that information. If
+ it's needed in other situations, we could consider breaking up
+ SYMBOL_SET_NAMES to provide access to the demangled name lookup
+ cache. */
+
+const struct partial_symbol *
+add_psymbol_to_list (char *name, int namelength, domain_enum domain,
+ enum address_class class,
+ struct psymbol_allocation_list *list,
+ long val, /* Value as a long */
+ CORE_ADDR coreaddr, /* Value as a CORE_ADDR */
+ enum language language, struct objfile *objfile)
+{
+ const struct partial_symbol *psym;
+
+ int added;
+
+ /* Stash the partial symbol away in the cache */
+ psym = add_psymbol_to_bcache (name, namelength, domain, class,
+ val, coreaddr, language, objfile, &added);
+
+ /* Do not duplicate global partial symbols. */
+ if (list == &objfile->global_psymbols
+ && !added)
+ return psym;
+
+ /* Save pointer to partial symbol in psymtab, growing symtab if needed. */
+ append_psymbol_to_list (list, psym, objfile);
return psym;
}
section, return that section.
find_pc_overlay(pc): find any overlay section that contains
the pc, either in its VMA or its LMA
- overlay_is_mapped(sect): true if overlay is marked as mapped
+ section_is_mapped(sect): true if overlay is marked as mapped
section_is_overlay(sect): true if section's VMA != LMA
pc_in_mapped_range(pc,sec): true if pc belongs to section's VMA
pc_in_unmapped_range(...): true if pc belongs to section's LMA
enum overlay_debugging_state overlay_debugging = ovly_off;
int overlay_cache_invalid = 0; /* True if need to refresh mapped state */
-/* Target vector for refreshing overlay mapped state */
-static void simple_overlay_update (struct obj_section *);
-void (*target_overlay_update) (struct obj_section *) = simple_overlay_update;
-
/* Function: section_is_overlay (SECTION)
Returns true if SECTION has VMA not equal to LMA, ie.
SECTION is loaded at an address different from where it will "run". */
int
-section_is_overlay (asection *section)
+section_is_overlay (struct obj_section *section)
{
- /* FIXME: need bfd *, so we can use bfd_section_lma methods. */
-
- if (overlay_debugging)
- if (section && section->lma != 0 &&
- section->vma != section->lma)
- return 1;
+ if (overlay_debugging && section)
+ {
+ bfd *abfd = section->objfile->obfd;
+ asection *bfd_section = section->the_bfd_section;
+
+ if (bfd_section_lma (abfd, bfd_section) != 0
+ && bfd_section_lma (abfd, bfd_section)
+ != bfd_section_vma (abfd, bfd_section))
+ return 1;
+ }
return 0;
}
struct obj_section *sect;
ALL_OBJSECTIONS (objfile, sect)
- if (section_is_overlay (sect->the_bfd_section))
- sect->ovly_mapped = -1;
+ if (section_is_overlay (sect))
+ sect->ovly_mapped = -1;
}
-/* Function: overlay_is_mapped (SECTION)
+/* Function: section_is_mapped (SECTION)
Returns true if section is an overlay, and is currently mapped.
- Private: public access is thru function section_is_mapped.
Access to the ovly_mapped flag is restricted to this function, so
that we can do automatic update. If the global flag
overlay_invalidate_all. If the mapped state of the particular
section is stale, then call TARGET_OVERLAY_UPDATE to refresh it. */
-static int
-overlay_is_mapped (struct obj_section *osect)
+int
+section_is_mapped (struct obj_section *osect)
{
- if (osect == 0 || !section_is_overlay (osect->the_bfd_section))
+ struct gdbarch *gdbarch;
+
+ if (osect == 0 || !section_is_overlay (osect))
return 0;
switch (overlay_debugging)
case ovly_off:
return 0; /* overlay debugging off */
case ovly_auto: /* overlay debugging automatic */
- /* Unles there is a target_overlay_update function,
+ /* Unles there is a gdbarch_overlay_update function,
there's really nothing useful to do here (can't really go auto) */
- if (target_overlay_update)
+ gdbarch = get_objfile_arch (osect->objfile);
+ if (gdbarch_overlay_update_p (gdbarch))
{
if (overlay_cache_invalid)
{
overlay_cache_invalid = 0;
}
if (osect->ovly_mapped == -1)
- (*target_overlay_update) (osect);
+ gdbarch_overlay_update (gdbarch, osect);
}
/* fall thru to manual case */
case ovly_on: /* overlay debugging manual */
}
}
-/* Function: section_is_mapped
- Returns true if section is an overlay, and is currently mapped. */
-
-int
-section_is_mapped (asection *section)
-{
- struct objfile *objfile;
- struct obj_section *osect;
-
- if (overlay_debugging)
- if (section && section_is_overlay (section))
- ALL_OBJSECTIONS (objfile, osect)
- if (osect->the_bfd_section == section)
- return overlay_is_mapped (osect);
-
- return 0;
-}
-
/* Function: pc_in_unmapped_range
If PC falls into the lma range of SECTION, return true, else false. */
CORE_ADDR
-pc_in_unmapped_range (CORE_ADDR pc, asection *section)
+pc_in_unmapped_range (CORE_ADDR pc, struct obj_section *section)
{
- /* FIXME: need bfd *, so we can use bfd_section_lma methods. */
+ if (section_is_overlay (section))
+ {
+ bfd *abfd = section->objfile->obfd;
+ asection *bfd_section = section->the_bfd_section;
- int size;
+ /* We assume the LMA is relocated by the same offset as the VMA. */
+ bfd_vma size = bfd_get_section_size (bfd_section);
+ CORE_ADDR offset = obj_section_offset (section);
+
+ if (bfd_get_section_lma (abfd, bfd_section) + offset <= pc
+ && pc < bfd_get_section_lma (abfd, bfd_section) + offset + size)
+ return 1;
+ }
- if (overlay_debugging)
- if (section && section_is_overlay (section))
- {
- size = bfd_get_section_size (section);
- if (section->lma <= pc && pc < section->lma + size)
- return 1;
- }
return 0;
}
If PC falls into the vma range of SECTION, return true, else false. */
CORE_ADDR
-pc_in_mapped_range (CORE_ADDR pc, asection *section)
+pc_in_mapped_range (CORE_ADDR pc, struct obj_section *section)
{
- /* FIXME: need bfd *, so we can use bfd_section_vma methods. */
-
- int size;
+ if (section_is_overlay (section))
+ {
+ if (obj_section_addr (section) <= pc
+ && pc < obj_section_endaddr (section))
+ return 1;
+ }
- if (overlay_debugging)
- if (section && section_is_overlay (section))
- {
- size = bfd_get_section_size (section);
- if (section->vma <= pc && pc < section->vma + size)
- return 1;
- }
return 0;
}
/* Return true if the mapped ranges of sections A and B overlap, false
otherwise. */
static int
-sections_overlap (asection *a, asection *b)
+sections_overlap (struct obj_section *a, struct obj_section *b)
{
- /* FIXME: need bfd *, so we can use bfd_section_vma methods. */
-
- CORE_ADDR a_start = a->vma;
- CORE_ADDR a_end = a->vma + bfd_get_section_size (a);
- CORE_ADDR b_start = b->vma;
- CORE_ADDR b_end = b->vma + bfd_get_section_size (b);
+ CORE_ADDR a_start = obj_section_addr (a);
+ CORE_ADDR a_end = obj_section_endaddr (a);
+ CORE_ADDR b_start = obj_section_addr (b);
+ CORE_ADDR b_end = obj_section_endaddr (b);
return (a_start < b_end && b_start < a_end);
}
May be the same as PC. */
CORE_ADDR
-overlay_unmapped_address (CORE_ADDR pc, asection *section)
+overlay_unmapped_address (CORE_ADDR pc, struct obj_section *section)
{
- /* FIXME: need bfd *, so we can use bfd_section_lma methods. */
+ if (section_is_overlay (section) && pc_in_mapped_range (pc, section))
+ {
+ bfd *abfd = section->objfile->obfd;
+ asection *bfd_section = section->the_bfd_section;
- if (overlay_debugging)
- if (section && section_is_overlay (section) &&
- pc_in_mapped_range (pc, section))
- return pc + section->lma - section->vma;
+ return pc + bfd_section_lma (abfd, bfd_section)
+ - bfd_section_vma (abfd, bfd_section);
+ }
return pc;
}
May be the same as PC. */
CORE_ADDR
-overlay_mapped_address (CORE_ADDR pc, asection *section)
+overlay_mapped_address (CORE_ADDR pc, struct obj_section *section)
{
- /* FIXME: need bfd *, so we can use bfd_section_vma methods. */
+ if (section_is_overlay (section) && pc_in_unmapped_range (pc, section))
+ {
+ bfd *abfd = section->objfile->obfd;
+ asection *bfd_section = section->the_bfd_section;
- if (overlay_debugging)
- if (section && section_is_overlay (section) &&
- pc_in_unmapped_range (pc, section))
- return pc + section->vma - section->lma;
+ return pc + bfd_section_vma (abfd, bfd_section)
+ - bfd_section_lma (abfd, bfd_section);
+ }
return pc;
}
depending on whether the section is mapped or not. */
CORE_ADDR
-symbol_overlayed_address (CORE_ADDR address, asection *section)
+symbol_overlayed_address (CORE_ADDR address, struct obj_section *section)
{
if (overlay_debugging)
{
Else if PC matches an unmapped section's VMA, return that section.
Else if PC matches an unmapped section's LMA, return that section. */
-asection *
+struct obj_section *
find_pc_overlay (CORE_ADDR pc)
{
struct objfile *objfile;
if (overlay_debugging)
ALL_OBJSECTIONS (objfile, osect)
- if (section_is_overlay (osect->the_bfd_section))
+ if (section_is_overlay (osect))
{
- if (pc_in_mapped_range (pc, osect->the_bfd_section))
+ if (pc_in_mapped_range (pc, osect))
{
- if (overlay_is_mapped (osect))
- return osect->the_bfd_section;
+ if (section_is_mapped (osect))
+ return osect;
else
best_match = osect;
}
- else if (pc_in_unmapped_range (pc, osect->the_bfd_section))
+ else if (pc_in_unmapped_range (pc, osect))
best_match = osect;
}
- return best_match ? best_match->the_bfd_section : NULL;
+ return best_match;
}
/* Function: find_pc_mapped_section (PC)
If PC falls into the VMA address range of an overlay section that is
currently marked as MAPPED, return that section. Else return NULL. */
-asection *
+struct obj_section *
find_pc_mapped_section (CORE_ADDR pc)
{
struct objfile *objfile;
if (overlay_debugging)
ALL_OBJSECTIONS (objfile, osect)
- if (pc_in_mapped_range (pc, osect->the_bfd_section) &&
- overlay_is_mapped (osect))
- return osect->the_bfd_section;
+ if (pc_in_mapped_range (pc, osect) && section_is_mapped (osect))
+ return osect;
return NULL;
}
if (overlay_debugging)
ALL_OBJSECTIONS (objfile, osect)
- if (overlay_is_mapped (osect))
+ if (section_is_mapped (osect))
{
const char *name;
bfd_vma lma, vma;
name = bfd_section_name (objfile->obfd, osect->the_bfd_section);
printf_filtered ("Section %s, loaded at ", name);
- deprecated_print_address_numeric (lma, 1, gdb_stdout);
+ fputs_filtered (paddress (lma), gdb_stdout);
puts_filtered (" - ");
- deprecated_print_address_numeric (lma + size, 1, gdb_stdout);
+ fputs_filtered (paddress (lma + size), gdb_stdout);
printf_filtered (", mapped at ");
- deprecated_print_address_numeric (vma, 1, gdb_stdout);
+ fputs_filtered (paddress (vma), gdb_stdout);
puts_filtered (" - ");
- deprecated_print_address_numeric (vma + size, 1, gdb_stdout);
+ fputs_filtered (paddress (vma + size), gdb_stdout);
puts_filtered ("\n");
nmapped++;
{
struct objfile *objfile, *objfile2;
struct obj_section *sec, *sec2;
- asection *bfdsec;
if (!overlay_debugging)
error (_("\
if (!strcmp (bfd_section_name (objfile->obfd, sec->the_bfd_section), args))
{
/* Now, check to see if the section is an overlay. */
- bfdsec = sec->the_bfd_section;
- if (!section_is_overlay (bfdsec))
+ if (!section_is_overlay (sec))
continue; /* not an overlay section */
/* Mark the overlay as "mapped" */
/* Next, make a pass and unmap any sections that are
overlapped by this new section: */
ALL_OBJSECTIONS (objfile2, sec2)
- if (sec2->ovly_mapped
- && sec != sec2
- && sec->the_bfd_section != sec2->the_bfd_section
- && sections_overlap (sec->the_bfd_section,
- sec2->the_bfd_section))
+ if (sec2->ovly_mapped && sec != sec2 && sections_overlap (sec, sec2))
{
if (info_verbose)
printf_unfiltered (_("Note: section %s unmapped by overlap\n"),
static void
overlay_load_command (char *args, int from_tty)
{
- if (target_overlay_update)
- (*target_overlay_update) (NULL);
+ if (gdbarch_overlay_update_p (current_gdbarch))
+ gdbarch_overlay_update (current_gdbarch, NULL);
else
error (_("This target does not know how to read its overlay state."));
}
This is GDB's default target overlay layer. It works with the
minimal overlay manager supplied as an example by Cygnus. The
- entry point is via a function pointer "target_overlay_update",
+ entry point is via a function pointer "gdbarch_overlay_update",
so targets that use a different runtime overlay manager can
substitute their own overlay_update function and take over the
function pointer.
{
VMA, SIZE, LMA, MAPPED
};
-#define TARGET_LONG_BYTES (TARGET_LONG_BIT / TARGET_CHAR_BIT)
/* Throw away the cached copy of _ovly_table */
static void
}
#endif
-/* Read an array of ints from the target into a local buffer.
+/* Read an array of ints of size SIZE from the target into a local buffer.
Convert to host order. int LEN is number of ints */
static void
-read_target_long_array (CORE_ADDR memaddr, unsigned int *myaddr, int len)
+read_target_long_array (CORE_ADDR memaddr, unsigned int *myaddr,
+ int len, int size)
{
/* FIXME (alloca): Not safe if array is very large. */
- gdb_byte *buf = alloca (len * TARGET_LONG_BYTES);
+ gdb_byte *buf = alloca (len * size);
int i;
- read_memory (memaddr, buf, len * TARGET_LONG_BYTES);
+ read_memory (memaddr, buf, len * size);
for (i = 0; i < len; i++)
- myaddr[i] = extract_unsigned_integer (TARGET_LONG_BYTES * i + buf,
- TARGET_LONG_BYTES);
+ myaddr[i] = extract_unsigned_integer (size * i + buf, size);
}
/* Find and grab a copy of the target _ovly_table
simple_read_overlay_table (void)
{
struct minimal_symbol *novlys_msym, *ovly_table_msym;
+ struct gdbarch *gdbarch;
+ int word_size;
simple_free_overlay_table ();
novlys_msym = lookup_minimal_symbol ("_novlys", NULL, NULL);
return 0;
}
+ gdbarch = get_objfile_arch (msymbol_objfile (ovly_table_msym));
+ word_size = gdbarch_long_bit (gdbarch) / TARGET_CHAR_BIT;
+
cache_novlys = read_memory_integer (SYMBOL_VALUE_ADDRESS (novlys_msym), 4);
cache_ovly_table
= (void *) xmalloc (cache_novlys * sizeof (*cache_ovly_table));
cache_ovly_table_base = SYMBOL_VALUE_ADDRESS (ovly_table_msym);
read_target_long_array (cache_ovly_table_base,
(unsigned int *) cache_ovly_table,
- cache_novlys * 4);
+ cache_novlys * 4, word_size);
return 1; /* SUCCESS */
}
msym = lookup_minimal_symbol ("_ovly_region_table", NULL, NULL);
if (msym != NULL)
{
+ struct gdbarch *gdbarch = get_objfile_arch (msymbol_objfile (msym));
+ int word_size = gdbarch_long_bit (gdbarch) / TARGET_CHAR_BIT;
cache_ovly_region_table_base = SYMBOL_VALUE_ADDRESS (msym);
read_target_long_array (cache_ovly_region_table_base,
(unsigned int *) cache_ovly_region_table,
- cache_novly_regions * 3);
+ cache_novly_regions * 3, word_size);
}
else
return 0; /* failure */
int i, size;
bfd *obfd = osect->objfile->obfd;
asection *bsect = osect->the_bfd_section;
+ struct gdbarch *gdbarch = get_objfile_arch (osect->objfile);
+ int word_size = gdbarch_long_bit (gdbarch) / TARGET_CHAR_BIT;
size = bfd_get_section_size (osect->the_bfd_section);
for (i = 0; i < cache_novlys; i++)
&& cache_ovly_table[i][LMA] == bfd_section_lma (obfd, bsect)
/* && cache_ovly_table[i][SIZE] == size */ )
{
- read_target_long_array (cache_ovly_table_base + i * TARGET_LONG_BYTES,
- (unsigned int *) cache_ovly_table[i], 4);
+ read_target_long_array (cache_ovly_table_base + i * word_size,
+ (unsigned int *) cache_ovly_table[i],
+ 4, word_size);
if (cache_ovly_table[i][VMA] == bfd_section_vma (obfd, bsect)
&& cache_ovly_table[i][LMA] == bfd_section_lma (obfd, bsect)
/* && cache_ovly_table[i][SIZE] == size */ )
If a cached entry can't be found or the cache isn't valid, then
re-read the entire cache, and go ahead and update all sections. */
-static void
+void
simple_overlay_update (struct obj_section *osect)
{
struct objfile *objfile;
/* Now may as well update all sections, even if only one was requested. */
ALL_OBJSECTIONS (objfile, osect)
- if (section_is_overlay (osect->the_bfd_section))
+ if (section_is_overlay (osect))
{
int i, size;
bfd *obfd = osect->objfile->obfd;
one affected platform is PowerPC GNU/Linux, although it depends on
the version of the linker in use). Also, ELF object files naturally
have unresolved relocations for their debug sections. We need to apply
- the relocations in order to get the locations of symbols correct. */
+ the relocations in order to get the locations of symbols correct.
+ Another example that may require relocation processing, is the
+ DWARF-2 .eh_frame section in .o files, although it isn't strictly a
+ debug section. */
bfd_byte *
symfile_relocate_debug_section (bfd *abfd, asection *sectp, bfd_byte *buf)
{
- /* We're only interested in debugging sections with relocation
+ /* We're only interested in sections with relocation
information. */
if ((sectp->flags & SEC_RELOC) == 0)
return NULL;
- if ((sectp->flags & SEC_DEBUGGING) == 0)
- return NULL;
/* We will handle section offsets properly elsewhere, so relocate as if
all sections begin at 0. */
return bfd_simple_get_relocated_section_contents (abfd, sectp, buf, NULL);
}
+struct symfile_segment_data *
+get_symfile_segment_data (bfd *abfd)
+{
+ struct sym_fns *sf = find_sym_fns (abfd);
+
+ if (sf == NULL)
+ return NULL;
+
+ return sf->sym_segments (abfd);
+}
+
+void
+free_symfile_segment_data (struct symfile_segment_data *data)
+{
+ xfree (data->segment_bases);
+ xfree (data->segment_sizes);
+ xfree (data->segment_info);
+ xfree (data);
+}
+
+
+/* Given:
+ - DATA, containing segment addresses from the object file ABFD, and
+ the mapping from ABFD's sections onto the segments that own them,
+ and
+ - SEGMENT_BASES[0 .. NUM_SEGMENT_BASES - 1], holding the actual
+ segment addresses reported by the target,
+ store the appropriate offsets for each section in OFFSETS.
+
+ If there are fewer entries in SEGMENT_BASES than there are segments
+ in DATA, then apply SEGMENT_BASES' last entry to all the segments.
+
+ If there are more entries, then ignore the extra. The target may
+ not be able to distinguish between an empty data segment and a
+ missing data segment; a missing text segment is less plausible. */
+int
+symfile_map_offsets_to_segments (bfd *abfd, struct symfile_segment_data *data,
+ struct section_offsets *offsets,
+ int num_segment_bases,
+ const CORE_ADDR *segment_bases)
+{
+ int i;
+ asection *sect;
+
+ /* It doesn't make sense to call this function unless you have some
+ segment base addresses. */
+ gdb_assert (segment_bases > 0);
+
+ /* If we do not have segment mappings for the object file, we
+ can not relocate it by segments. */
+ gdb_assert (data != NULL);
+ gdb_assert (data->num_segments > 0);
+
+ for (i = 0, sect = abfd->sections; sect != NULL; i++, sect = sect->next)
+ {
+ int which = data->segment_info[i];
+
+ gdb_assert (0 <= which && which <= data->num_segments);
+
+ /* Don't bother computing offsets for sections that aren't
+ loaded as part of any segment. */
+ if (! which)
+ continue;
+
+ /* Use the last SEGMENT_BASES entry as the address of any extra
+ segments mentioned in DATA->segment_info. */
+ if (which > num_segment_bases)
+ which = num_segment_bases;
+
+ offsets->offsets[i] = (segment_bases[which - 1]
+ - data->segment_bases[which - 1]);
+ }
+
+ return 1;
+}
+
+static void
+symfile_find_segment_sections (struct objfile *objfile)
+{
+ bfd *abfd = objfile->obfd;
+ int i;
+ asection *sect;
+ struct symfile_segment_data *data;
+
+ data = get_symfile_segment_data (objfile->obfd);
+ if (data == NULL)
+ return;
+
+ if (data->num_segments != 1 && data->num_segments != 2)
+ {
+ free_symfile_segment_data (data);
+ return;
+ }
+
+ for (i = 0, sect = abfd->sections; sect != NULL; i++, sect = sect->next)
+ {
+ CORE_ADDR vma;
+ int which = data->segment_info[i];
+
+ if (which == 1)
+ {
+ if (objfile->sect_index_text == -1)
+ objfile->sect_index_text = sect->index;
+
+ if (objfile->sect_index_rodata == -1)
+ objfile->sect_index_rodata = sect->index;
+ }
+ else if (which == 2)
+ {
+ if (objfile->sect_index_data == -1)
+ objfile->sect_index_data = sect->index;
+
+ if (objfile->sect_index_bss == -1)
+ objfile->sect_index_bss = sect->index;
+ }
+ }
+
+ free_symfile_segment_data (data);
+}
+
void
_initialize_symfile (void)
{
&cmdlist);
set_cmd_completer (c, filename_completer);
- c = add_cmd ("add-shared-symbol-files", class_files,
- add_shared_symbol_files_command, _("\
-Load the symbols from shared objects in the dynamic linker's link map."),
- &cmdlist);
- c = add_alias_cmd ("assf", "add-shared-symbol-files", class_files, 1,
- &cmdlist);
-
c = add_cmd ("load", class_files, load_command, _("\
Dynamically load FILE into the running program, and record its symbols\n\
for access from GDB.\n\
NULL,
show_debug_file_directory,
&setlist, &showlist);
+
+ add_setshow_boolean_cmd ("symbol-loading", no_class,
+ &print_symbol_loading, _("\
+Set printing of symbol loading messages."), _("\
+Show printing of symbol loading messages."), NULL,
+ NULL,
+ NULL,
+ &setprintlist, &showprintlist);
}
projects / deliverable / binutils-gdb.git / blobdiff