/* Generic symbol file reading for the GNU debugger, GDB.
- Copyright 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
+ Copyright 1990, 1991, 1992, 1993, 1994 Free Software Foundation, Inc.
Contributed by Cygnus Support, using pieces from other GDB modules.
This file is part of GDB.
#include "language.h"
#include "complaints.h"
#include "demangle.h"
+#include "inferior.h" /* for write_pc */
#include <obstack.h>
#include <assert.h>
#endif
/* Global variables owned by this file */
-
int readnow_symbol_files; /* Read full symbols immediately */
struct complaint oldsyms_complaint = {
static void
add_symbol_file_command PARAMS ((char *, int));
+static void
+add_shared_symbol_files_command PARAMS ((char *, int));
+
static void
cashier_psymtab PARAMS ((struct partial_symtab *));
}
}
-void
-sort_all_symtab_syms ()
-{
- register struct symtab *s;
- register struct objfile *objfile;
-
- for (objfile = object_files; objfile != NULL; objfile = objfile -> next)
- {
- for (s = objfile -> symtabs; s != NULL; s = s -> next)
- {
- sort_symtab_syms (s);
- }
- }
-}
-
/* Make a copy of the string at PTR with SIZE characters in the symbol obstack
(and add a null character at the end in the copy).
Returns the address of the copy. */
else
{
/* Examination of non-executable.o files. Short-circuit this stuff. */
- /* ~0 will not be in any file, we hope. */
- objfile -> ei.entry_point = ~0;
- /* set the startup file to be an empty range. */
- objfile -> ei.entry_file_lowpc = 0;
- objfile -> ei.entry_file_highpc = 0;
+ objfile -> ei.entry_point = INVALID_ENTRY_POINT;
+ objfile -> ei.entry_file_lowpc = INVALID_ENTRY_LOWPC;
+ objfile -> ei.entry_file_highpc = INVALID_ENTRY_HIGHPC;
}
}
+/* Get current entry point address. */
+
+CORE_ADDR
+entry_point_address()
+{
+ return symfile_objfile ? symfile_objfile->ei.entry_point : 0;
+}
+
/* Remember the lowest-addressed loadable section we've seen.
This function is called via bfd_map_over_sections. */
symfile_objfile = NULL;
}
+ /* Currently we keep symbols from the add-symbol-file command.
+ If the user wants to get rid of them, they should do "symbol-file"
+ without arguments first. Not sure this is the best behavior
+ (PR 2207). */
+
(*objfile -> sf -> sym_new_init) (objfile);
}
else if (0 == bfd_get_section_name (objfile->obfd, lowest_sect)
|| !STREQ (".text",
bfd_get_section_name (objfile->obfd, lowest_sect)))
- warning ("Lowest section in %s is %s at 0x%x",
+ /* FIXME-32x64--assumes bfd_vma fits in long. */
+ warning ("Lowest section in %s is %s at 0x%lx",
objfile->name,
bfd_section_name (objfile->obfd, lowest_sect),
- bfd_section_vma (objfile->obfd, lowest_sect));
+ (unsigned long) bfd_section_vma (objfile->obfd, lowest_sect));
if (lowest_sect)
addr -= bfd_section_vma (objfile->obfd, lowest_sect);
(*objfile -> sf -> sym_init) (objfile);
clear_complaints (1, verbo);
- /* If objfile->sf->sym_offsets doesn't set this, we don't care
- (currently). */
- objfile->num_sections = 0; /* krp-FIXME: why zero? */
section_offsets = (*objfile -> sf -> sym_offsets) (objfile, addr);
objfile->section_offsets = section_offsets;
(*objfile -> sf -> sym_read) (objfile, section_offsets, mainline);
- /* Don't allow char * to have a typename (else would get caddr_t.) */
- /* Ditto void *. FIXME should do this for all the builtin types. */
+ if (!have_partial_symbols () && !have_full_symbols ())
+ {
+ wrap_here ("");
+ printf_filtered ("(no debugging symbols found)...");
+ wrap_here ("");
+ }
+
+ /* Don't allow char * to have a typename (else would get caddr_t).
+ Ditto void *. FIXME: Check whether this is now done by all the
+ symbol readers themselves (many of them now do), and if so remove
+ it from here. */
TYPE_NAME (lookup_pointer_type (builtin_type_char)) = 0;
TYPE_NAME (lookup_pointer_type (builtin_type_void)) = 0;
{
printf_filtered ("Mapped symbols for %s...", name);
wrap_here ("");
- fflush (stdout);
+ gdb_flush (gdb_stdout);
}
init_entry_point_info (objfile);
find_sym_fns (objfile);
{
printf_filtered ("Reading symbols from %s...", name);
wrap_here ("");
- fflush (stdout);
+ gdb_flush (gdb_stdout);
}
syms_from_objfile (objfile, addr, mainline, from_tty);
}
{
printf_filtered ("expanding to full symbols...");
wrap_here ("");
- fflush (stdout);
+ gdb_flush (gdb_stdout);
}
for (psymtab = objfile -> psymtabs;
if (from_tty || info_verbose)
{
printf_filtered ("done.\n");
- fflush (stdout);
+ gdb_flush (gdb_stdout);
}
new_symfile_objfile (objfile, mainline, from_tty);
return (objfile);
}
-/* This is the symbol-file command. Read the file, analyze its symbols,
- and add a struct symtab to a symtab list. */
+/* This is the symbol-file command. Read the file, analyze its
+ symbols, and add a struct symtab to a symtab list. The syntax of
+ the command is rather bizarre--(1) buildargv implements various
+ quoting conventions which are undocumented and have little or
+ nothing in common with the way things are quoted (or not quoted)
+ elsewhere in GDB, (2) options are used, which are not generally
+ used in GDB (perhaps "set mapped on", "set readnow on" would be
+ better), (3) the order of options matters, which is contrary to GNU
+ conventions (because it is confusing and inconvenient). */
void
symbol_file_command (args, from_tty)
{
char **argv;
char *name = NULL;
+ CORE_ADDR text_relocation = 0; /* text_relocation */
struct cleanup *cleanups;
int mapped = 0;
int readnow = 0;
symfile_objfile = NULL;
if (from_tty)
{
- printf ("No symbol file now.\n");
+ printf_unfiltered ("No symbol file now.\n");
}
}
else
}
else
{
- name = *argv;
+ char *p;
+
+ name = *argv;
+
+ /* this is for rombug remote only, to get the text relocation by
+ using link command */
+ p = strrchr(name, '/');
+ if (p != NULL) p++;
+ else p = name;
+
+ target_link(p, &text_relocation);
+
+ if (text_relocation == (CORE_ADDR)0)
+ return;
+ else if (text_relocation == (CORE_ADDR)-1)
+ symbol_file_add (name, from_tty, (CORE_ADDR)0, 1, mapped,
+ readnow);
+ else
+ symbol_file_add (name, from_tty, (CORE_ADDR)text_relocation,
+ 0, mapped, readnow);
+ set_initial_language ();
}
argv++;
}
{
error ("no symbol file name was specified");
}
- else
- {
- symbol_file_add (name, from_tty, (CORE_ADDR)0, 1, mapped, readnow);
- set_initial_language ();
- }
do_cleanups (cleanups);
}
}
close (desc);
make_cleanup (free, name);
error ("\"%s\": can't open to read symbols: %s.", name,
- bfd_errmsg (bfd_error));
+ bfd_errmsg (bfd_get_error ()));
}
sym_bfd->cacheable = true;
bfd_close (sym_bfd); /* This also closes desc */
make_cleanup (free, name);
error ("\"%s\": can't read symbols: %s.", name,
- bfd_errmsg (bfd_error));
+ bfd_errmsg (bfd_get_error ()));
}
return (sym_bfd);
struct objfile *objfile;
{
struct sym_fns *sf;
+ enum bfd_flavour our_flavour = bfd_get_flavour (objfile -> obfd);
+ char *our_target = bfd_get_target (objfile -> obfd);
+
+ /* Special kludge for RS/6000. See xcoffread.c. */
+ if (STREQ (our_target, "aixcoff-rs6000"))
+ our_flavour = (enum bfd_flavour)-1;
+
+ /* Special kludge for apollo. See dstread.c. */
+ if (STREQN (our_target, "apollo", 6))
+ our_flavour = (enum bfd_flavour)-2;
for (sf = symtab_fns; sf != NULL; sf = sf -> next)
{
- if (strncmp (bfd_get_target (objfile -> obfd),
- sf -> sym_name, sf -> sym_namelen) == 0)
+ if (our_flavour == sf -> sym_flavour)
{
objfile -> sf = sf;
return;
char *arg;
int from_tty;
{
+ if (arg == NULL)
+ arg = get_exec_file (1);
target_load (arg, from_tty);
}
{
struct cleanup *old_cleanups;
asection *s;
- bfd *loadfile_bfd = bfd_openr (filename, gnutarget);
+ bfd *loadfile_bfd;
+
+ loadfile_bfd = bfd_openr (filename, gnutarget);
if (loadfile_bfd == NULL)
{
perror_with_name (filename);
if (!bfd_check_format (loadfile_bfd, bfd_object))
{
error ("\"%s\" is not an object file: %s", filename,
- bfd_errmsg (bfd_error));
+ bfd_errmsg (bfd_get_error ()));
}
for (s = loadfile_bfd->sections; s; s = s->next)
/* Is this really necessary? I guess it gives the user something
to look at during a long download. */
- printf_filtered ("Loading section %s, size 0x%x vma 0x%x\n",
+ printf_filtered ("Loading section %s, size 0x%lx vma ",
bfd_get_section_name (loadfile_bfd, s),
- size, vma);
+ (unsigned long) size);
+ print_address_numeric (vma, 1, gdb_stdout);
+ printf_filtered ("\n");
bfd_get_section_contents (loadfile_bfd, s, buffer, 0, size);
left pointing at the remainder of the command line, which should
be the address expression to evaluate. */
- if ((name == NULL) || (*args == '\000') )
+ if (name == NULL)
{
- error ("add-symbol-file takes a file name and an address");
+ error ("add-symbol-file takes a file name");
}
name = tilde_expand (name);
make_cleanup (free, name);
- text_addr = parse_and_eval_address (args);
+ if (*args != '\000')
+ {
+ text_addr = parse_and_eval_address (args);
+ }
+ else
+ {
+ target_link(name, &text_addr);
+ if (text_addr == (CORE_ADDR)-1)
+ error("Don't know how to get text start location for this file");
+ }
+ /* FIXME-32x64: Assumes text_addr fits in a long. */
if (!query ("add symbol table from file \"%s\" at text_addr = %s?\n",
- name, local_hex_string (text_addr)))
+ name, local_hex_string ((unsigned long)text_addr)))
error ("Not confirmed.");
symbol_file_add (name, 0, text_addr, 0, mapped, readnow);
}
\f
+static void
+add_shared_symbol_files_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+#ifdef ADD_SHARED_SYMBOL_FILES
+ ADD_SHARED_SYMBOL_FILES (args, from_tty);
+#else
+ error ("This command is not available in this configuration of GDB.");
+#endif
+}
+\f
/* Re-read symbols if a symbol-file has changed. */
void
reread_symbols ()
This routine should then walk down each partial symbol table
and see if the symbol table that it originates from has been changed */
-the_big_top:
for (objfile = object_files; objfile; objfile = objfile->next) {
if (objfile->obfd) {
#ifdef IBM6000_TARGET
continue;
}
new_modtime = new_statbuf.st_mtime;
- if (new_modtime != objfile->mtime) {
- printf_filtered ("`%s' has changed; re-reading symbols.\n",
- objfile->name);
- /* FIXME, this should use a different command...that would only
- affect this objfile's symbols, and would reset objfile->mtime.
- (objfile->mtime = new_modtime;)
- HOWEVER, that command isn't written yet -- so call symbol_file_
- command, and restart the scan from the top, because it munges
- the object_files list. */
- symbol_file_command (objfile->name, 0);
- reread_one = 1;
- goto the_big_top; /* Start over. */
- }
+ if (new_modtime != objfile->mtime)
+ {
+ struct cleanup *old_cleanups;
+ struct section_offsets *offsets;
+ int num_offsets;
+ int section_offsets_size;
+
+ printf_filtered ("`%s' has changed; re-reading symbols.\n",
+ objfile->name);
+
+ /* There are various functions like symbol_file_add,
+ symfile_bfd_open, syms_from_objfile, etc., which might
+ appear to do what we want. But they have various other
+ effects which we *don't* want. So we just do stuff
+ ourselves. We don't worry about mapped files (for one thing,
+ any mapped file will be out of date). */
+
+ /* If we get an error, blow away this objfile (not sure if
+ that is the correct response for things like shared
+ libraries). */
+ old_cleanups = make_cleanup (free_objfile, objfile);
+ /* We need to do this whenever any symbols go away. */
+ make_cleanup (clear_symtab_users, 0);
+
+ /* Clean up any state BFD has sitting around. We don't need
+ to close the descriptor but BFD lacks a way of closing the
+ BFD without closing the descriptor. */
+ if (!bfd_close (objfile->obfd))
+ error ("Can't close BFD for %s.", objfile->name);
+ objfile->obfd = bfd_openr (objfile->name, gnutarget);
+ if (objfile->obfd == NULL)
+ error ("Can't open %s to read symbols.", objfile->name);
+ /* bfd_openr sets cacheable to true, which is what we want. */
+ if (!bfd_check_format (objfile->obfd, bfd_object))
+ error ("Can't read symbols from %s: %s.", objfile->name,
+ bfd_errmsg (bfd_get_error ()));
+
+ /* Save the offsets, we will nuke them with the rest of the
+ psymbol_obstack. */
+ num_offsets = objfile->num_sections;
+ section_offsets_size =
+ sizeof (struct section_offsets)
+ + sizeof (objfile->section_offsets->offsets) * num_offsets;
+ offsets = (struct section_offsets *) alloca (section_offsets_size);
+ memcpy (offsets, objfile->section_offsets, section_offsets_size);
+
+ /* Nuke all the state that we will re-read. Much of the following
+ code which sets things to NULL really is necessary to tell
+ other parts of GDB that there is nothing currently there. */
+
+ /* FIXME: Do we have to free a whole linked list, or is this
+ enough? */
+ if (objfile->global_psymbols.list)
+ mfree (objfile->md, objfile->global_psymbols.list);
+ objfile->global_psymbols.list = NULL;
+ objfile->global_psymbols.next = NULL;
+ objfile->global_psymbols.size = 0;
+ if (objfile->static_psymbols.list)
+ mfree (objfile->md, objfile->static_psymbols.list);
+ objfile->static_psymbols.list = NULL;
+ objfile->static_psymbols.next = NULL;
+ objfile->static_psymbols.size = 0;
+
+ /* Free the obstacks for non-reusable objfiles */
+ obstack_free (&objfile -> psymbol_obstack, 0);
+ obstack_free (&objfile -> symbol_obstack, 0);
+ obstack_free (&objfile -> type_obstack, 0);
+ objfile->sections = NULL;
+ objfile->symtabs = NULL;
+ objfile->psymtabs = NULL;
+ objfile->free_psymtabs = NULL;
+ objfile->msymbols = NULL;
+ objfile->minimal_symbol_count= 0;
+ objfile->fundamental_types = NULL;
+ if (objfile -> sf != NULL)
+ {
+ (*objfile -> sf -> sym_finish) (objfile);
+ }
+
+ /* We never make this a mapped file. */
+ objfile -> md = NULL;
+ /* obstack_specify_allocation also initializes the obstack so
+ it is empty. */
+ obstack_specify_allocation (&objfile -> psymbol_obstack, 0, 0,
+ xmalloc, free);
+ obstack_specify_allocation (&objfile -> symbol_obstack, 0, 0,
+ xmalloc, free);
+ obstack_specify_allocation (&objfile -> type_obstack, 0, 0,
+ xmalloc, free);
+ if (build_objfile_section_table (objfile))
+ {
+ error ("Can't find the file sections in `%s': %s",
+ objfile -> name, bfd_errmsg (bfd_get_error ()));
+ }
+
+ /* We use the same section offsets as from last time. I'm not
+ sure whether that is always correct for shared libraries. */
+ objfile->section_offsets = (struct section_offsets *)
+ obstack_alloc (&objfile -> psymbol_obstack, section_offsets_size);
+ memcpy (objfile->section_offsets, offsets, section_offsets_size);
+ objfile->num_sections = num_offsets;
+
+ /* What the hell is sym_new_init for, anyway? The concept of
+ distinguishing between the main file and additional files
+ in this way seems rather dubious. */
+ if (objfile == symfile_objfile)
+ (*objfile->sf->sym_new_init) (objfile);
+
+ (*objfile->sf->sym_init) (objfile);
+ clear_complaints (1, 1);
+ /* The "mainline" parameter is a hideous hack; I think leaving it
+ zero is OK since dbxread.c also does what it needs to do if
+ objfile->global_psymbols.size is 0. */
+ (*objfile->sf->sym_read) (objfile, objfile->section_offsets, 0);
+ if (!have_partial_symbols () && !have_full_symbols ())
+ {
+ wrap_here ("");
+ printf_filtered ("(no debugging symbols found)\n");
+ wrap_here ("");
+ }
+ objfile -> flags |= OBJF_SYMS;
+
+ /* We're done reading the symbol file; finish off complaints. */
+ clear_complaints (0, 1);
+
+ /* Getting new symbols may change our opinion about what is
+ frameless. */
+
+ reinit_frame_cache ();
+
+ /* Discard cleanups as symbol reading was successful. */
+ discard_cleanups (old_cleanups);
+
+ /* If the mtime has changed between the time we set new_modtime
+ and now, we *want* this to be out of date, so don't call stat
+ again now. */
+ objfile->mtime = new_modtime;
+ reread_one = 1;
+ }
}
}
if (reread_one)
- breakpoint_re_set ();
+ clear_symtab_users ();
}
\f
; /* Get default */
else if (0 == (c = strrchr (filename, '.')))
; /* Get default. */
- else if(STREQ(c,".mod"))
- return language_m2;
- else if(STREQ(c,".c"))
+ else if (STREQ (c, ".c"))
return language_c;
- else if(STREQ(c,".cc") || STREQ(c,".C"))
+ else if (STREQ (c, ".cc") || STREQ (c, ".C") || STREQ (c, ".cxx")
+ || STREQ (c, ".cpp") || STREQ (c, ".cp"))
return language_cplus;
- else if(STREQ(c,".ch") || STREQ(c,".c186") || STREQ(c,".c286"))
+ else if (STREQ (c, ".ch") || STREQ (c, ".c186") || STREQ (c, ".c286"))
return language_chill;
+ else if (STREQ (c, ".mod"))
+ return language_m2;
+ else if (STREQ (c, ".s") || STREQ (c, ".S"))
+ return language_asm;
return language_unknown; /* default */
}
set_default_breakpoint (0, 0, 0, 0);
current_source_symtab = 0;
current_source_line = 0;
+ clear_pc_function_cache ();
}
/* clear_symtab_users_once:
c->completer = filename_completer;
c = add_cmd ("add-symbol-file", class_files, add_symbol_file_command,
- "Load the symbols from FILE, assuming FILE has been dynamically loaded.\n\
-The second argument provides the starting address of the file's text.",
+ "Usage: add-symbol-file FILE ADDR\n\
+Load the symbols from FILE, assuming FILE has been dynamically loaded.\n\
+ADDR is the starting address of the file's text.",
&cmdlist);
c->completer = filename_completer;
+ c = add_cmd ("add-shared-symbol-files", class_files,
+ add_shared_symbol_files_command,
+ "Load the symbols from shared objects in the dynamic linker's link map.",
+ &cmdlist);
+ c = add_alias_cmd ("assf", "add-shared-symbol-files", class_files, 1,
+ &cmdlist);
+
c = add_cmd ("load", class_files, load_command,
"Dynamically load FILE into the running program, and record its symbols\n\
for access from GDB.", &cmdlist);