void (*post_add_symbol_hook) PARAMS ((void));
void (*target_new_objfile_hook) PARAMS ((struct objfile *));
+static void clear_symtab_users_cleanup (void *ignore);
+
/* Global variables owned by this file */
int readnow_symbol_files; /* Read full symbols immediately */
extern int info_verbose;
-extern void report_transfer_performance PARAMS ((unsigned long,
- time_t, time_t));
+extern void report_transfer_performance (unsigned long, time_t, time_t);
/* Functions this file defines */
#if 0
-static int simple_read_overlay_region_table PARAMS ((void));
-static void simple_free_overlay_region_table PARAMS ((void));
+static int simple_read_overlay_region_table (void);
+static void simple_free_overlay_region_table (void);
#endif
-static void set_initial_language PARAMS ((void));
+static void set_initial_language (void);
-static void load_command PARAMS ((char *, int));
+static void load_command (char *, int);
-static void add_symbol_file_command PARAMS ((char *, int));
+static void add_symbol_file_command (char *, int);
-static void add_shared_symbol_files_command PARAMS ((char *, int));
+static void add_shared_symbol_files_command (char *, int);
-static void cashier_psymtab PARAMS ((struct partial_symtab *));
+static void cashier_psymtab (struct partial_symtab *);
-static int compare_psymbols PARAMS ((const void *, const void *));
+static int compare_psymbols (const void *, const void *);
-static int compare_symbols PARAMS ((const void *, const void *));
+static int compare_symbols (const void *, const void *);
-bfd *symfile_bfd_open PARAMS ((char *));
+bfd *symfile_bfd_open (char *);
-static void find_sym_fns PARAMS ((struct objfile *));
+static void find_sym_fns (struct objfile *);
-static void decrement_reading_symtab PARAMS ((void *));
+static void decrement_reading_symtab (void *);
-static void overlay_invalidate_all PARAMS ((void));
+static void overlay_invalidate_all (void);
-static int overlay_is_mapped PARAMS ((struct obj_section *));
+static int overlay_is_mapped (struct obj_section *);
-void list_overlays_command PARAMS ((char *, int));
+void list_overlays_command (char *, int);
-void map_overlay_command PARAMS ((char *, int));
+void map_overlay_command (char *, int);
-void unmap_overlay_command PARAMS ((char *, int));
+void unmap_overlay_command (char *, int);
-static void overlay_auto_command PARAMS ((char *, int));
+static void overlay_auto_command (char *, int);
-static void overlay_manual_command PARAMS ((char *, int));
+static void overlay_manual_command (char *, int);
-static void overlay_off_command PARAMS ((char *, int));
+static void overlay_off_command (char *, int);
-static void overlay_load_command PARAMS ((char *, int));
+static void overlay_load_command (char *, int);
-static void overlay_command PARAMS ((char *, int));
+static void overlay_command (char *, int);
-static void simple_free_overlay_table PARAMS ((void));
+static void simple_free_overlay_table (void);
-static void read_target_long_array PARAMS ((CORE_ADDR, unsigned int *, int));
+static void read_target_long_array (CORE_ADDR, unsigned int *, int);
-static int simple_read_overlay_table PARAMS ((void));
+static int simple_read_overlay_table (void);
-static int simple_overlay_update_1 PARAMS ((struct obj_section *));
+static int simple_overlay_update_1 (struct obj_section *);
-static void add_filename_language PARAMS ((char *ext, enum language lang));
+static void add_filename_language (char *ext, enum language lang);
-static void set_ext_lang_command PARAMS ((char *args, int from_tty));
+static void set_ext_lang_command (char *args, int from_tty);
-static void info_ext_lang_command PARAMS ((char *args, int from_tty));
+static void info_ext_lang_command (char *args, int from_tty);
-static void init_filename_language_table PARAMS ((void));
+static void init_filename_language_table (void);
-void _initialize_symfile PARAMS ((void));
+void _initialize_symfile (void);
/* List of all available sym_fns. On gdb startup, each object file reader
calls add_symtab_fns() to register information on each format it is
for (stp = start, oidx = 0; stp != end; stp++)
{
- if (strcmp (stp->the_bfd_section->name, ".text") == 0)
- sap->text_addr = stp->addr;
- else if (strcmp (stp->the_bfd_section->name, ".data") == 0)
- sap->data_addr = stp->addr;
- else if (strcmp (stp->the_bfd_section->name, ".bss") == 0)
- sap->bss_addr = stp->addr;
-
if (stp->the_bfd_section->flags & (SEC_ALLOC | SEC_LOAD)
&& oidx < MAX_SECTIONS)
{
struct section_addr_info *addrs;
{
int i;
+ asection *sect = NULL;
objfile->num_sections = SECT_OFF_MAX;
objfile->section_offsets = (struct section_offsets *)
obstack_alloc (&objfile->psymbol_obstack, SIZEOF_SECTION_OFFSETS);
memset (objfile->section_offsets, 0, SIZEOF_SECTION_OFFSETS);
- /* If user explicitly specified values for data and bss, set them here. */
-
- if (addrs->text_addr)
- ANOFFSET (objfile->section_offsets, SECT_OFF_TEXT) = addrs->text_addr;
- if (addrs->data_addr)
- ANOFFSET (objfile->section_offsets, SECT_OFF_DATA) = addrs->data_addr;
- if (addrs->bss_addr)
- ANOFFSET (objfile->section_offsets, SECT_OFF_BSS) = addrs->bss_addr;
-
- /* Now calculate offsets for other sections. */
+ /* Now calculate offsets for section that were specified by the
+ caller. */
for (i = 0; i < MAX_SECTIONS && addrs->other[i].name; i++)
{
struct other_sections *osp ;
osp = &addrs->other[i] ;
- if (addrs->other[i].addr == 0)
+ if (osp->addr == 0)
continue;
-#if 0
- if (strcmp (".text", osp->name) == 0)
- SECT_OFF_TEXT = osp->sectindex ;
- else if (strcmp (".data", osp->name) == 0)
- SECT_OFF_DATA = osp->sectindex ;
- else if (strcmp (".bss", osp->name) == 0)
- SECT_OFF_BSS = osp->sectindex ;
-#endif
+
/* Record all sections in offsets */
+ /* The section_offsets in the objfile are here filled in using
+ the BFD index. */
ANOFFSET (objfile->section_offsets, osp->sectindex) = osp->addr;
}
-}
+ /* Remember the bfd indexes for the .text, .data, .bss and
+ .rodata sections. */
+
+ sect = bfd_get_section_by_name (objfile->obfd, ".text");
+ if (sect)
+ objfile->sect_index_text = sect->index;
+
+ sect = bfd_get_section_by_name (objfile->obfd, ".data");
+ if (sect)
+ objfile->sect_index_data = sect->index;
+
+ sect = bfd_get_section_by_name (objfile->obfd, ".bss");
+ if (sect)
+ objfile->sect_index_bss = sect->index;
+
+ sect = bfd_get_section_by_name (objfile->obfd, ".rodata");
+ if (sect)
+ objfile->sect_index_rodata = sect->index;
+
+}
/* Process a symbol file, as either the main file or as a dynamically
loaded file.
/* Make sure that partially constructed symbol tables will be cleaned up
if an error occurs during symbol reading. */
- old_chain = make_cleanup ((make_cleanup_func) free_objfile, objfile);
+ old_chain = make_cleanup_free_objfile (objfile);
if (mainline)
{
/* We will modify the main symbol table, make sure that all its users
will be cleaned up if an error occurs during symbol reading. */
- make_cleanup ((make_cleanup_func) clear_symtab_users, 0);
+ make_cleanup (clear_symtab_users_cleanup, 0 /*ignore*/);
/* Since no error yet, throw away the old symbol table. */
We no longer warn if the lowest section is not a text segment (as
happens for the PA64 port. */
- if (mainline)
- {
- /* No offset from objfile addresses. */
- addrs -> text_addr = 0;
- addrs -> data_addr = 0;
- addrs -> bss_addr = 0;
- }
- else
+ if (!mainline)
{
/* Find lowest loadable section to be used as starting point for
continguous sections. FIXME!! won't work without call to find
if (lower_sect == NULL)
warning ("no loadable sections found in added symbol-file %s",
objfile->name);
- else if ((bfd_get_section_flags (objfile->obfd, lower_sect) & SEC_CODE)
- == 0)
- warning ("Lowest section in %s is %s at %s",
- objfile->name,
- bfd_section_name (objfile->obfd, lower_sect),
- paddr (bfd_section_vma (objfile->obfd, lower_sect)));
+ else
+ if ((bfd_get_section_flags (objfile->obfd, lower_sect) & SEC_CODE) == 0)
+ warning ("Lowest section in %s is %s at %s",
+ objfile->name,
+ bfd_section_name (objfile->obfd, lower_sect),
+ paddr (bfd_section_vma (objfile->obfd, lower_sect)));
if (lower_sect != NULL)
lower_offset = bfd_section_vma (objfile->obfd, lower_sect);
else
(the loadable section directly below it in memory).
this_offset = lower_offset = lower_addr - lower_orig_addr */
- /* FIXME: These sections will not need special treatment because ALL
- sections are in the other sections table */
-
- if (addrs->text_addr != 0)
- {
- sect = bfd_get_section_by_name (objfile->obfd, ".text");
- if (sect)
- {
- addrs->text_addr -= bfd_section_vma (objfile->obfd, sect);
- lower_offset = addrs->text_addr;
- }
- }
- else
- /* ??? who's below me? */
- addrs->text_addr = lower_offset;
-
- if (addrs->data_addr != 0)
- {
- sect = bfd_get_section_by_name (objfile->obfd, ".data");
- if (sect)
- {
- addrs->data_addr -= bfd_section_vma (objfile->obfd, sect);
- lower_offset = addrs->data_addr;
- }
- }
- else
- addrs->data_addr = lower_offset;
-
- if (addrs->bss_addr != 0)
- {
- sect = bfd_get_section_by_name (objfile->obfd, ".bss");
- if (sect)
- {
- addrs->bss_addr -= bfd_section_vma (objfile->obfd, sect);
- lower_offset = addrs->bss_addr;
- }
- }
- else
- addrs->bss_addr = lower_offset;
-
- /* Now calculate offsets for other sections. */
+ /* Calculate offsets for sections. */
for (i=0 ; i < MAX_SECTIONS && addrs->other[i].name; i++)
{
-
- if (addrs->other[i].addr != 0)
+ if (addrs->other[i].addr != 0)
{
- sect=bfd_get_section_by_name(objfile->obfd, addrs->other[i].name);
+ sect = bfd_get_section_by_name (objfile->obfd, addrs->other[i].name);
if (sect)
{
addrs->other[i].addr -= bfd_section_vma (objfile->obfd, sect);
lower_offset = addrs->other[i].addr;
+ /* This is the index used by BFD. */
addrs->other[i].sectindex = sect->index ;
}
else
CORE_ADDR s_addr = 0;
int i;
- if (strcmp (s->the_bfd_section->name, ".text") == 0)
- s_addr = addrs->text_addr;
- else if (strcmp (s->the_bfd_section->name, ".data") == 0)
- s_addr = addrs->data_addr;
- else if (strcmp (s->the_bfd_section->name, ".bss") == 0)
- s_addr = addrs->bss_addr;
- else
for (i = 0;
!s_addr && i < MAX_SECTIONS && addrs->other[i].name;
i++)
used in GDB (perhaps "set mapped on", "set readnow on" would be
better), (3) the order of options matters, which is contrary to GNU
conventions (because it is confusing and inconvenient). */
+/* Note: ezannoni 2000-04-17. This function used to have support for
+ rombug (see remote-os9k.c). It consisted of a call to target_link()
+ (target.c) to get the address of the text segment from the target,
+ and pass that to symbol_file_add(). This is no longer supported. */
void
symbol_file_command (args, from_tty)
{
char **argv;
char *name = NULL;
- CORE_ADDR text_relocation = 0; /* text_relocation */
struct cleanup *cleanups;
int flags = OBJF_USERLOADED;
symfile_objfile = NULL;
if (from_tty)
- {
printf_unfiltered ("No symbol file now.\n");
- }
#ifdef HPUXHPPA
RESET_HP_UX_GLOBALS ();
#endif
while (*argv != NULL)
{
if (STREQ (*argv, "-mapped"))
- {
- flags |= OBJF_MAPPED;
- }
- else if (STREQ (*argv, "-readnow"))
- {
+ flags |= OBJF_MAPPED;
+ else
+ if (STREQ (*argv, "-readnow"))
flags |= OBJF_READNOW;
- }
- else if (**argv == '-')
- {
- error ("unknown option `%s'", *argv);
- }
- else
- {
- char *p;
-
- name = *argv;
-
- /* this is for rombug remote only, to get the text relocation by
- using link command */
- p = strrchr (name, '/');
- if (p != NULL)
- p++;
+ else
+ if (**argv == '-')
+ error ("unknown option `%s'", *argv);
else
- p = name;
-
- target_link (p, &text_relocation);
-
- if (text_relocation == (CORE_ADDR) 0)
- return;
- else if (text_relocation == (CORE_ADDR) -1)
{
+ name = *argv;
symbol_file_add (name, from_tty, NULL, 1, flags);
#ifdef HPUXHPPA
RESET_HP_UX_GLOBALS ();
#endif
- }
- else
- {
- struct section_addr_info section_addrs;
- memset (§ion_addrs, 0, sizeof (section_addrs));
- section_addrs.text_addr = (CORE_ADDR) text_relocation;
- symbol_file_add (name, from_tty, §ion_addrs, 0, flags);
- }
-
- /* Getting new symbols may change our opinion about what is
- frameless. */
- reinit_frame_cache ();
+ /* Getting new symbols may change our opinion about
+ what is frameless. */
+ reinit_frame_cache ();
- set_initial_language ();
- }
+ set_initial_language ();
+ }
argv++;
}
/* FIXME: should be checking for errors from bfd_close (for one thing,
on error it does not free all the storage associated with the
bfd). */
- make_cleanup ((make_cleanup_func) bfd_close, loadfile_bfd);
+ make_cleanup_bfd_close (loadfile_bfd);
if (!bfd_check_format (loadfile_bfd, bfd_object))
{
else
addr = strtoul (val, NULL, 10);
- if (strcmp (sec, ".text") == 0)
- section_addrs.text_addr = addr;
- else if (strcmp (sec, ".data") == 0)
- section_addrs.data_addr = addr;
- else if (strcmp (sec, ".bss") == 0)
- section_addrs.bss_addr = addr;
-
/* Here we store the section offsets in the order they were
entered on the command line. */
section_addrs.other[sec_num].name = sec;
/* If we get an error, blow away this objfile (not sure if
that is the correct response for things like shared
libraries). */
- old_cleanups = make_cleanup ((make_cleanup_func) free_objfile,
- objfile);
+ old_cleanups = make_cleanup_free_objfile (objfile);
/* We need to do this whenever any symbols go away. */
- make_cleanup ((make_cleanup_func) clear_symtab_users, 0);
+ make_cleanup (clear_symtab_users_cleanup, 0 /*ignore*/);
/* Clean up any state BFD has sitting around. We don't need
to close the descriptor but BFD lacks a way of closing the
target_new_objfile_hook (NULL);
}
+static void
+clear_symtab_users_cleanup (void *ignore)
+{
+ clear_symtab_users ();
+}
+
/* clear_symtab_users_once:
This function is run after symbol reading, or from a cleanup.
#if 0
/* FIXME: As free_named_symtabs is currently a big noop this function
is no longer needed. */
-static void
-clear_symtab_users_once PARAMS ((void));
+static void clear_symtab_users_once (void);
static int clear_symtab_users_queued;
static int clear_symtab_users_done;
int overlay_cache_invalid = 0; /* True if need to refresh mapped state */
/* Target vector for refreshing overlay mapped state */
-static void simple_overlay_update PARAMS ((struct obj_section *));
+static void simple_overlay_update (struct obj_section *);
void (*target_overlay_update) PARAMS ((struct obj_section *))
= simple_overlay_update;
projects / deliverable / binutils-gdb.git / blobdiff