/* Generic symbol file reading for the GNU debugger, GDB.
Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
- 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+ 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
Contributed by Cygnus Support, using pieces from other GDB modules.
#include "readline/readline.h"
#include "gdb_assert.h"
#include "block.h"
+#include "observer.h"
+#include "exec.h"
#include <sys/types.h>
#include <fcntl.h>
#include "gdb_stat.h"
#include <ctype.h>
#include <time.h>
+#include <sys/time.h>
#ifndef O_BINARY
#define O_BINARY 0
#else
int symbol_reloading = 0;
#endif
+static void
+show_symbol_reloading (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("\
+Dynamic symbol table reloading multiple times in one run is %s.\n"),
+ value);
+}
+
/* If non-zero, shared library symbols will be added automatically
when the inferior is created, new libraries are loaded, or when
}
}
+/* The arguments to place_section. */
+
+struct place_section_arg
+{
+ struct section_offsets *offsets;
+ CORE_ADDR lowest;
+};
+
+/* Find a unique offset to use for loadable section SECT if
+ the user did not provide an offset. */
+
+void
+place_section (bfd *abfd, asection *sect, void *obj)
+{
+ struct place_section_arg *arg = obj;
+ CORE_ADDR *offsets = arg->offsets->offsets, start_addr;
+ int done;
+
+ /* We are only interested in loadable sections. */
+ if ((bfd_get_section_flags (abfd, sect) & SEC_LOAD) == 0)
+ return;
+
+ /* If the user specified an offset, honor it. */
+ if (offsets[sect->index] != 0)
+ return;
+
+ /* Otherwise, let's try to find a place for the section. */
+ do {
+ asection *cur_sec;
+ ULONGEST align = 1 << bfd_get_section_alignment (abfd, sect);
+
+ start_addr = (arg->lowest + align - 1) & -align;
+ done = 1;
+
+ for (cur_sec = abfd->sections; cur_sec != NULL; cur_sec = cur_sec->next)
+ {
+ int indx = cur_sec->index;
+ CORE_ADDR cur_offset;
+
+ /* We don't need to compare against ourself. */
+ if (cur_sec == sect)
+ continue;
+
+ /* We can only conflict with loadable sections. */
+ if ((bfd_get_section_flags (abfd, cur_sec) & SEC_LOAD) == 0)
+ continue;
+
+ /* We do not expect this to happen; just ignore sections in a
+ relocatable file with an assigned VMA. */
+ if (bfd_section_vma (abfd, cur_sec) != 0)
+ continue;
+
+ /* If the section offset is 0, either the section has not been placed
+ yet, or it was the lowest section placed (in which case LOWEST
+ will be past its end). */
+ if (offsets[indx] == 0)
+ continue;
+
+ /* If this section would overlap us, then we must move up. */
+ if (start_addr + bfd_get_section_size (sect) > offsets[indx]
+ && start_addr < offsets[indx] + bfd_get_section_size (cur_sec))
+ {
+ start_addr = offsets[indx] + bfd_get_section_size (cur_sec);
+ start_addr = (start_addr + align - 1) & -align;
+ done = 0;
+ continue;
+ }
+
+ /* Otherwise, we appear to be OK. So far. */
+ }
+ }
+ while (!done);
+
+ offsets[sect->index] = start_addr;
+ arg->lowest = start_addr + bfd_get_section_size (sect);
+
+ exec_set_section_address (bfd_get_filename (abfd), sect->index, start_addr);
+}
/* Parse the user's idea of an offset for dynamic linking, into our idea
of how to represent it for fast symbol reading. This is the default
(objfile->section_offsets)->offsets[osp->sectindex] = osp->addr;
}
+ /* For relocatable files, all loadable sections will start at zero.
+ The zero is meaningless, so try to pick arbitrary addresses such
+ that no loadable sections overlap. This algorithm is quadratic,
+ but the number of sections in a single object file is generally
+ small. */
+ if ((bfd_get_file_flags (objfile->obfd) & (EXEC_P | DYNAMIC)) == 0)
+ {
+ struct place_section_arg arg;
+ arg.offsets = objfile->section_offsets;
+ arg.lowest = 0;
+ bfd_map_over_sections (objfile->obfd, place_section, &arg);
+ }
+
/* Remember the bfd indexes for the .text, .data, .bss and
.rodata sections. */
init_objfile_sect_indices (objfile);
}
static char *debug_file_directory = NULL;
+static void
+show_debug_file_directory (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("\
+The directory where separate debug symbols are searched for is \"%s\".\n"),
+ value);
+}
#if ! defined (DEBUG_SUBDIRECTORY)
#define DEBUG_SUBDIRECTORY ".debug"
used in GDB (perhaps "set mapped on", "set readnow on" would be
better), (3) the order of options matters, which is contrary to GNU
conventions (because it is confusing and inconvenient). */
-/* Note: ezannoni 2000-04-17. This function used to have support for
- rombug (see remote-os9k.c). It consisted of a call to target_link()
- (target.c) to get the address of the text segment from the target,
- and pass that to symbol_file_add(). This is no longer supported. */
void
symbol_file_command (char *args, int from_tty)
name = absolute_name; /* Keep 2nd malloc'd copy in bfd */
/* It'll be freed in free_objfile(). */
- sym_bfd = bfd_fdopenr (name, gnutarget, desc);
+ sym_bfd = bfd_fopen (name, gnutarget, FOPEN_RB, desc);
if (!sym_bfd)
{
close (desc);
performance compares. */
static int download_write_size = 512;
+static void
+show_download_write_size (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("\
+The write size used when downloading a program is %s.\n"),
+ value);
+}
static int validate_download = 0;
/* Callback service function for generic_load (bfd_map_over_sections). */
{
asection *s;
bfd *loadfile_bfd;
- time_t start_time, end_time; /* Start and end times of download */
+ struct timeval start_time, end_time;
char *filename;
struct cleanup *old_cleanups;
char *offptr;
bfd_map_over_sections (loadfile_bfd, add_section_size_callback,
(void *) &cbdata.total_size);
- start_time = time (NULL);
+ gettimeofday (&start_time, NULL);
bfd_map_over_sections (loadfile_bfd, load_section_callback, &cbdata);
- end_time = time (NULL);
+ gettimeofday (&end_time, NULL);
entry = bfd_get_start_address (loadfile_bfd);
ui_out_text (uiout, "Start address ");
others don't (or didn't - perhaps they have all been deleted). */
print_transfer_performance (gdb_stdout, cbdata.data_count,
- cbdata.write_count, end_time - start_time);
+ cbdata.write_count, &start_time, &end_time);
do_cleanups (old_cleanups);
}
report_transfer_performance (unsigned long data_count, time_t start_time,
time_t end_time)
{
- print_transfer_performance (gdb_stdout, data_count,
- end_time - start_time, 0);
+ struct timeval start, end;
+
+ start.tv_sec = start_time;
+ start.tv_usec = 0;
+ end.tv_sec = end_time;
+ end.tv_usec = 0;
+
+ print_transfer_performance (gdb_stdout, data_count, 0, &start, &end);
}
void
print_transfer_performance (struct ui_file *stream,
unsigned long data_count,
unsigned long write_count,
- unsigned long time_count)
+ const struct timeval *start_time,
+ const struct timeval *end_time)
{
+ unsigned long time_count;
+
+ /* Compute the elapsed time in milliseconds, as a tradeoff between
+ accuracy and overflow. */
+ time_count = (end_time->tv_sec - start_time->tv_sec) * 1000;
+ time_count += (end_time->tv_usec - start_time->tv_usec) / 1000;
+
ui_out_text (uiout, "Transfer rate: ");
if (time_count > 0)
{
ui_out_field_fmt (uiout, "transfer-rate", "%lu",
- (data_count * 8) / time_count);
+ 1000 * (data_count * 8) / time_count);
ui_out_text (uiout, " bits/sec");
}
else
}
if (reread_one)
- clear_symtab_users ();
+ {
+ clear_symtab_users ();
+ /* At least one objfile has changed, so we can consider that
+ the executable we're debugging has changed too. */
+ observer_notify_executable_changed (NULL);
+ }
+
}
}
static char *ext_args;
+static void
+show_ext_args (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("\
+Mapping between filename extension and source language is \"%s\".\n"),
+ value);
+}
static void
set_ext_lang_command (char *args, int from_tty, struct cmd_list_element *e)
{
/* Someday, we should do better than this, by only blowing away
the things that really need to be blown. */
+
+ /* Clear the "current" symtab first, because it is no longer valid.
+ breakpoint_re_set may try to access the current symtab. */
+ clear_current_source_symtab_and_line ();
+
clear_value_history ();
clear_displays ();
clear_internalvars ();
breakpoint_re_set ();
set_default_breakpoint (0, 0, 0, 0);
- clear_current_source_symtab_and_line ();
clear_pc_function_cache ();
if (deprecated_target_new_objfile_hook)
deprecated_target_new_objfile_hook (NULL);
Set dynamic symbol table reloading multiple times in one run."), _("\
Show dynamic symbol table reloading multiple times in one run."), NULL,
NULL,
- NULL, /* FIXME: i18n: */
+ show_symbol_reloading,
&setlist, &showlist);
add_prefix_cmd ("overlay", class_support, overlay_command,
Show mapping between filename extension and source language."), _("\
Usage: set extension-language .foo bar"),
set_ext_lang_command,
- NULL, /* FIXME: i18n: */
+ show_ext_args,
&setlist, &showlist);
add_info ("extensions", info_ext_lang_command,
limited by the size of the target packet and the memory\n\
cache."),
NULL,
- NULL, /* FIXME: i18n: */
+ show_download_write_size,
&setlist, &showlist);
debug_file_directory = xstrdup (DEBUGDIR);
and lastly at the path of the directory of the binary with\n\
the global debug-file directory prepended."),
NULL,
- NULL, /* FIXME: i18n: */
+ show_debug_file_directory,
&setlist, &showlist);
}
projects / deliverable / binutils-gdb.git / blobdiff