/* Floating point routines for GDB, the GNU debugger.
- Copyright (C) 2017 Free Software Foundation, Inc.
+ Copyright (C) 2017-2020 Free Software Foundation, Inc.
This file is part of GDB.
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
-#include "dfp.h"
-#include "doublest.h"
#include "gdbtypes.h"
#include "floatformat.h"
#include "target-float.h"
+#include "gdbarch.h"
+
+/* Target floating-point operations.
+
+ We provide multiple implementations of those operations, which differ
+ by the host-side intermediate format they perform computations in.
+
+ Those multiple implementations all derive from the following abstract
+ base class, which specifies the set of operations to be implemented. */
+
+class target_float_ops
+{
+public:
+ virtual std::string to_string (const gdb_byte *addr, const struct type *type,
+ const char *format) const = 0;
+ virtual bool from_string (gdb_byte *addr, const struct type *type,
+ const std::string &string) const = 0;
+
+ virtual LONGEST to_longest (const gdb_byte *addr,
+ const struct type *type) const = 0;
+ virtual void from_longest (gdb_byte *addr, const struct type *type,
+ LONGEST val) const = 0;
+ virtual void from_ulongest (gdb_byte *addr, const struct type *type,
+ ULONGEST val) const = 0;
+ virtual double to_host_double (const gdb_byte *addr,
+ const struct type *type) const = 0;
+ virtual void from_host_double (gdb_byte *addr, const struct type *type,
+ double val) const = 0;
+ virtual void convert (const gdb_byte *from, const struct type *from_type,
+ gdb_byte *to, const struct type *to_type) const = 0;
+
+ virtual void binop (enum exp_opcode opcode,
+ const gdb_byte *x, const struct type *type_x,
+ const gdb_byte *y, const struct type *type_y,
+ gdb_byte *res, const struct type *type_res) const = 0;
+ virtual int compare (const gdb_byte *x, const struct type *type_x,
+ const gdb_byte *y, const struct type *type_y) const = 0;
+};
+
+
+/* Helper routines operating on binary floating-point data. */
+
+#include <cmath>
+#include <limits>
+
+/* Different kinds of floatformat numbers recognized by
+ floatformat_classify. To avoid portability issues, we use local
+ values instead of the C99 macros (FP_NAN et cetera). */
+enum float_kind {
+ float_nan,
+ float_infinite,
+ float_zero,
+ float_normal,
+ float_subnormal
+};
+
+/* The odds that CHAR_BIT will be anything but 8 are low enough that I'm not
+ going to bother with trying to muck around with whether it is defined in
+ a system header, what we do if not, etc. */
+#define FLOATFORMAT_CHAR_BIT 8
+
+/* The number of bytes that the largest floating-point type that we
+ can convert to doublest will need. */
+#define FLOATFORMAT_LARGEST_BYTES 16
+
+/* Return the floatformat's total size in host bytes. */
+static size_t
+floatformat_totalsize_bytes (const struct floatformat *fmt)
+{
+ return ((fmt->totalsize + FLOATFORMAT_CHAR_BIT - 1)
+ / FLOATFORMAT_CHAR_BIT);
+}
+
+/* Return the precision of the floating point format FMT. */
+static int
+floatformat_precision (const struct floatformat *fmt)
+{
+ /* Assume the precision of and IBM long double is twice the precision
+ of the underlying double. This matches what GCC does. */
+ if (fmt->split_half)
+ return 2 * floatformat_precision (fmt->split_half);
+
+ /* Otherwise, the precision is the size of mantissa in bits,
+ including the implicit bit if present. */
+ int prec = fmt->man_len;
+ if (fmt->intbit == floatformat_intbit_no)
+ prec++;
+
+ return prec;
+}
+
+/* Normalize the byte order of FROM into TO. If no normalization is
+ needed then FMT->byteorder is returned and TO is not changed;
+ otherwise the format of the normalized form in TO is returned. */
+static enum floatformat_byteorders
+floatformat_normalize_byteorder (const struct floatformat *fmt,
+ const void *from, void *to)
+{
+ const unsigned char *swapin;
+ unsigned char *swapout;
+ int words;
+
+ if (fmt->byteorder == floatformat_little
+ || fmt->byteorder == floatformat_big)
+ return fmt->byteorder;
+
+ words = fmt->totalsize / FLOATFORMAT_CHAR_BIT;
+ words >>= 2;
+
+ swapout = (unsigned char *)to;
+ swapin = (const unsigned char *)from;
+
+ if (fmt->byteorder == floatformat_vax)
+ {
+ while (words-- > 0)
+ {
+ *swapout++ = swapin[1];
+ *swapout++ = swapin[0];
+ *swapout++ = swapin[3];
+ *swapout++ = swapin[2];
+ swapin += 4;
+ }
+ /* This may look weird, since VAX is little-endian, but it is
+ easier to translate to big-endian than to little-endian. */
+ return floatformat_big;
+ }
+ else
+ {
+ gdb_assert (fmt->byteorder == floatformat_littlebyte_bigword);
+
+ while (words-- > 0)
+ {
+ *swapout++ = swapin[3];
+ *swapout++ = swapin[2];
+ *swapout++ = swapin[1];
+ *swapout++ = swapin[0];
+ swapin += 4;
+ }
+ return floatformat_big;
+ }
+}
+
+/* Extract a field which starts at START and is LEN bytes long. DATA and
+ TOTAL_LEN are the thing we are extracting it from, in byteorder ORDER. */
+static unsigned long
+get_field (const bfd_byte *data, enum floatformat_byteorders order,
+ unsigned int total_len, unsigned int start, unsigned int len)
+{
+ unsigned long result;
+ unsigned int cur_byte;
+ int cur_bitshift;
+
+ /* Caller must byte-swap words before calling this routine. */
+ gdb_assert (order == floatformat_little || order == floatformat_big);
+
+ /* Start at the least significant part of the field. */
+ if (order == floatformat_little)
+ {
+ /* We start counting from the other end (i.e, from the high bytes
+ rather than the low bytes). As such, we need to be concerned
+ with what happens if bit 0 doesn't start on a byte boundary.
+ I.e, we need to properly handle the case where total_len is
+ not evenly divisible by 8. So we compute ``excess'' which
+ represents the number of bits from the end of our starting
+ byte needed to get to bit 0. */
+ int excess = FLOATFORMAT_CHAR_BIT - (total_len % FLOATFORMAT_CHAR_BIT);
+
+ cur_byte = (total_len / FLOATFORMAT_CHAR_BIT)
+ - ((start + len + excess) / FLOATFORMAT_CHAR_BIT);
+ cur_bitshift = ((start + len + excess) % FLOATFORMAT_CHAR_BIT)
+ - FLOATFORMAT_CHAR_BIT;
+ }
+ else
+ {
+ cur_byte = (start + len) / FLOATFORMAT_CHAR_BIT;
+ cur_bitshift =
+ ((start + len) % FLOATFORMAT_CHAR_BIT) - FLOATFORMAT_CHAR_BIT;
+ }
+ if (cur_bitshift > -FLOATFORMAT_CHAR_BIT)
+ result = *(data + cur_byte) >> (-cur_bitshift);
+ else
+ result = 0;
+ cur_bitshift += FLOATFORMAT_CHAR_BIT;
+ if (order == floatformat_little)
+ ++cur_byte;
+ else
+ --cur_byte;
+
+ /* Move towards the most significant part of the field. */
+ while (cur_bitshift < len)
+ {
+ result |= (unsigned long)*(data + cur_byte) << cur_bitshift;
+ cur_bitshift += FLOATFORMAT_CHAR_BIT;
+ switch (order)
+ {
+ case floatformat_little:
+ ++cur_byte;
+ break;
+ case floatformat_big:
+ --cur_byte;
+ break;
+ }
+ }
+ if (len < sizeof(result) * FLOATFORMAT_CHAR_BIT)
+ /* Mask out bits which are not part of the field. */
+ result &= ((1UL << len) - 1);
+ return result;
+}
+
+/* Set a field which starts at START and is LEN bytes long. DATA and
+ TOTAL_LEN are the thing we are extracting it from, in byteorder ORDER. */
+static void
+put_field (unsigned char *data, enum floatformat_byteorders order,
+ unsigned int total_len, unsigned int start, unsigned int len,
+ unsigned long stuff_to_put)
+{
+ unsigned int cur_byte;
+ int cur_bitshift;
+
+ /* Caller must byte-swap words before calling this routine. */
+ gdb_assert (order == floatformat_little || order == floatformat_big);
+
+ /* Start at the least significant part of the field. */
+ if (order == floatformat_little)
+ {
+ int excess = FLOATFORMAT_CHAR_BIT - (total_len % FLOATFORMAT_CHAR_BIT);
+
+ cur_byte = (total_len / FLOATFORMAT_CHAR_BIT)
+ - ((start + len + excess) / FLOATFORMAT_CHAR_BIT);
+ cur_bitshift = ((start + len + excess) % FLOATFORMAT_CHAR_BIT)
+ - FLOATFORMAT_CHAR_BIT;
+ }
+ else
+ {
+ cur_byte = (start + len) / FLOATFORMAT_CHAR_BIT;
+ cur_bitshift =
+ ((start + len) % FLOATFORMAT_CHAR_BIT) - FLOATFORMAT_CHAR_BIT;
+ }
+ if (cur_bitshift > -FLOATFORMAT_CHAR_BIT)
+ {
+ *(data + cur_byte) &=
+ ~(((1 << ((start + len) % FLOATFORMAT_CHAR_BIT)) - 1)
+ << (-cur_bitshift));
+ *(data + cur_byte) |=
+ (stuff_to_put & ((1 << FLOATFORMAT_CHAR_BIT) - 1)) << (-cur_bitshift);
+ }
+ cur_bitshift += FLOATFORMAT_CHAR_BIT;
+ if (order == floatformat_little)
+ ++cur_byte;
+ else
+ --cur_byte;
+
+ /* Move towards the most significant part of the field. */
+ while (cur_bitshift < len)
+ {
+ if (len - cur_bitshift < FLOATFORMAT_CHAR_BIT)
+ {
+ /* This is the last byte. */
+ *(data + cur_byte) &=
+ ~((1 << (len - cur_bitshift)) - 1);
+ *(data + cur_byte) |= (stuff_to_put >> cur_bitshift);
+ }
+ else
+ *(data + cur_byte) = ((stuff_to_put >> cur_bitshift)
+ & ((1 << FLOATFORMAT_CHAR_BIT) - 1));
+ cur_bitshift += FLOATFORMAT_CHAR_BIT;
+ if (order == floatformat_little)
+ ++cur_byte;
+ else
+ --cur_byte;
+ }
+}
+
+/* Check if VAL (which is assumed to be a floating point number whose
+ format is described by FMT) is negative. */
+static int
+floatformat_is_negative (const struct floatformat *fmt,
+ const bfd_byte *uval)
+{
+ enum floatformat_byteorders order;
+ unsigned char newfrom[FLOATFORMAT_LARGEST_BYTES];
+
+ gdb_assert (fmt != NULL);
+ gdb_assert (fmt->totalsize
+ <= FLOATFORMAT_LARGEST_BYTES * FLOATFORMAT_CHAR_BIT);
+
+ /* An IBM long double (a two element array of double) always takes the
+ sign of the first double. */
+ if (fmt->split_half)
+ fmt = fmt->split_half;
+
+ order = floatformat_normalize_byteorder (fmt, uval, newfrom);
+
+ if (order != fmt->byteorder)
+ uval = newfrom;
+
+ return get_field (uval, order, fmt->totalsize, fmt->sign_start, 1);
+}
+
+/* Check if VAL is "not a number" (NaN) for FMT. */
+static enum float_kind
+floatformat_classify (const struct floatformat *fmt,
+ const bfd_byte *uval)
+{
+ long exponent;
+ unsigned long mant;
+ unsigned int mant_bits, mant_off;
+ int mant_bits_left;
+ enum floatformat_byteorders order;
+ unsigned char newfrom[FLOATFORMAT_LARGEST_BYTES];
+ int mant_zero;
+
+ gdb_assert (fmt != NULL);
+ gdb_assert (fmt->totalsize
+ <= FLOATFORMAT_LARGEST_BYTES * FLOATFORMAT_CHAR_BIT);
+
+ /* An IBM long double (a two element array of double) can be classified
+ by looking at the first double. inf and nan are specified as
+ ignoring the second double. zero and subnormal will always have
+ the second double 0.0 if the long double is correctly rounded. */
+ if (fmt->split_half)
+ fmt = fmt->split_half;
+
+ order = floatformat_normalize_byteorder (fmt, uval, newfrom);
+
+ if (order != fmt->byteorder)
+ uval = newfrom;
+
+ exponent = get_field (uval, order, fmt->totalsize, fmt->exp_start,
+ fmt->exp_len);
+
+ mant_bits_left = fmt->man_len;
+ mant_off = fmt->man_start;
+
+ mant_zero = 1;
+ while (mant_bits_left > 0)
+ {
+ mant_bits = std::min (mant_bits_left, 32);
+
+ mant = get_field (uval, order, fmt->totalsize, mant_off, mant_bits);
+
+ /* If there is an explicit integer bit, mask it off. */
+ if (mant_off == fmt->man_start
+ && fmt->intbit == floatformat_intbit_yes)
+ mant &= ~(1 << (mant_bits - 1));
+
+ if (mant)
+ {
+ mant_zero = 0;
+ break;
+ }
+
+ mant_off += mant_bits;
+ mant_bits_left -= mant_bits;
+ }
+
+ /* If exp_nan is not set, assume that inf, NaN, and subnormals are not
+ supported. */
+ if (! fmt->exp_nan)
+ {
+ if (mant_zero)
+ return float_zero;
+ else
+ return float_normal;
+ }
+
+ if (exponent == 0)
+ {
+ if (mant_zero)
+ return float_zero;
+ else
+ return float_subnormal;
+ }
+
+ if (exponent == fmt->exp_nan)
+ {
+ if (mant_zero)
+ return float_infinite;
+ else
+ return float_nan;
+ }
+
+ return float_normal;
+}
+
+/* Convert the mantissa of VAL (which is assumed to be a floating
+ point number whose format is described by FMT) into a hexadecimal
+ and store it in a static string. Return a pointer to that string. */
+static const char *
+floatformat_mantissa (const struct floatformat *fmt,
+ const bfd_byte *val)
+{
+ unsigned char *uval = (unsigned char *) val;
+ unsigned long mant;
+ unsigned int mant_bits, mant_off;
+ int mant_bits_left;
+ static char res[50];
+ char buf[9];
+ int len;
+ enum floatformat_byteorders order;
+ unsigned char newfrom[FLOATFORMAT_LARGEST_BYTES];
+
+ gdb_assert (fmt != NULL);
+ gdb_assert (fmt->totalsize
+ <= FLOATFORMAT_LARGEST_BYTES * FLOATFORMAT_CHAR_BIT);
+
+ /* For IBM long double (a two element array of double), return the
+ mantissa of the first double. The problem with returning the
+ actual mantissa from both doubles is that there can be an
+ arbitrary number of implied 0's or 1's between the mantissas
+ of the first and second double. In any case, this function
+ is only used for dumping out nans, and a nan is specified to
+ ignore the value in the second double. */
+ if (fmt->split_half)
+ fmt = fmt->split_half;
+
+ order = floatformat_normalize_byteorder (fmt, uval, newfrom);
+
+ if (order != fmt->byteorder)
+ uval = newfrom;
+
+ if (! fmt->exp_nan)
+ return 0;
+
+ /* Make sure we have enough room to store the mantissa. */
+ gdb_assert (sizeof res > ((fmt->man_len + 7) / 8) * 2);
+
+ mant_off = fmt->man_start;
+ mant_bits_left = fmt->man_len;
+ mant_bits = (mant_bits_left % 32) > 0 ? mant_bits_left % 32 : 32;
+
+ mant = get_field (uval, order, fmt->totalsize, mant_off, mant_bits);
+
+ len = xsnprintf (res, sizeof res, "%lx", mant);
+
+ mant_off += mant_bits;
+ mant_bits_left -= mant_bits;
+
+ while (mant_bits_left > 0)
+ {
+ mant = get_field (uval, order, fmt->totalsize, mant_off, 32);
+
+ xsnprintf (buf, sizeof buf, "%08lx", mant);
+ gdb_assert (len + strlen (buf) <= sizeof res);
+ strcat (res, buf);
+
+ mant_off += 32;
+ mant_bits_left -= 32;
+ }
+
+ return res;
+}
+
+/* Convert printf format string FORMAT to the otherwise equivalent string
+ which may be used to print a host floating-point number using the length
+ modifier LENGTH (which may be 0 if none is needed). If FORMAT is null,
+ return a format appropriate to print the full precision of a target
+ floating-point number of format FMT. */
+static std::string
+floatformat_printf_format (const struct floatformat *fmt,
+ const char *format, char length)
+{
+ std::string host_format;
+ char conversion;
+
+ if (format == nullptr)
+ {
+ /* If no format was specified, print the number using a format string
+ where the precision is set to the DECIMAL_DIG value for the given
+ floating-point format. This value is computed as
+
+ ceil(1 + p * log10(b)),
+
+ where p is the precision of the floating-point format in bits, and
+ b is the base (which is always 2 for the formats we support). */
+ const double log10_2 = .30102999566398119521;
+ double d_decimal_dig = 1 + floatformat_precision (fmt) * log10_2;
+ int decimal_dig = d_decimal_dig;
+ if (decimal_dig < d_decimal_dig)
+ decimal_dig++;
+
+ host_format = string_printf ("%%.%d", decimal_dig);
+ conversion = 'g';
+ }
+ else
+ {
+ /* Use the specified format, stripping out the conversion character
+ and length modifier, if present. */
+ size_t len = strlen (format);
+ gdb_assert (len > 1);
+ conversion = format[--len];
+ gdb_assert (conversion == 'e' || conversion == 'f' || conversion == 'g'
+ || conversion == 'E' || conversion == 'G');
+ if (format[len - 1] == 'L')
+ len--;
+
+ host_format = std::string (format, len);
+ }
+
+ /* Add the length modifier and conversion character appropriate for
+ handling the appropriate host floating-point type. */
+ if (length)
+ host_format += length;
+ host_format += conversion;
+
+ return host_format;
+}
+
+/* Implementation of target_float_ops using the host floating-point type T
+ as intermediate type. */
+
+template<typename T> class host_float_ops : public target_float_ops
+{
+public:
+ std::string to_string (const gdb_byte *addr, const struct type *type,
+ const char *format) const override;
+ bool from_string (gdb_byte *addr, const struct type *type,
+ const std::string &string) const override;
+
+ LONGEST to_longest (const gdb_byte *addr,
+ const struct type *type) const override;
+ void from_longest (gdb_byte *addr, const struct type *type,
+ LONGEST val) const override;
+ void from_ulongest (gdb_byte *addr, const struct type *type,
+ ULONGEST val) const override;
+ double to_host_double (const gdb_byte *addr,
+ const struct type *type) const override;
+ void from_host_double (gdb_byte *addr, const struct type *type,
+ double val) const override;
+ void convert (const gdb_byte *from, const struct type *from_type,
+ gdb_byte *to, const struct type *to_type) const override;
+
+ void binop (enum exp_opcode opcode,
+ const gdb_byte *x, const struct type *type_x,
+ const gdb_byte *y, const struct type *type_y,
+ gdb_byte *res, const struct type *type_res) const override;
+ int compare (const gdb_byte *x, const struct type *type_x,
+ const gdb_byte *y, const struct type *type_y) const override;
+
+private:
+ void from_target (const struct floatformat *fmt,
+ const gdb_byte *from, T *to) const;
+ void from_target (const struct type *type,
+ const gdb_byte *from, T *to) const;
+
+ void to_target (const struct type *type,
+ const T *from, gdb_byte *to) const;
+ void to_target (const struct floatformat *fmt,
+ const T *from, gdb_byte *to) const;
+};
+
+
+/* Convert TO/FROM target to the host floating-point format T.
+
+ If the host and target formats agree, we just copy the raw data
+ into the appropriate type of variable and return, letting the host
+ increase precision as necessary. Otherwise, we call the conversion
+ routine and let it do the dirty work. Note that even if the target
+ and host floating-point formats match, the length of the types
+ might still be different, so the conversion routines must make sure
+ to not overrun any buffers. For example, on x86, long double is
+ the 80-bit extended precision type on both 32-bit and 64-bit ABIs,
+ but by default it is stored as 12 bytes on 32-bit, and 16 bytes on
+ 64-bit, for alignment reasons. See comment in store_typed_floating
+ for a discussion about zeroing out remaining bytes in the target
+ buffer. */
+
+static const struct floatformat *host_float_format = GDB_HOST_FLOAT_FORMAT;
+static const struct floatformat *host_double_format = GDB_HOST_DOUBLE_FORMAT;
+static const struct floatformat *host_long_double_format
+ = GDB_HOST_LONG_DOUBLE_FORMAT;
+
+/* Convert target floating-point value at FROM in format FMT to host
+ floating-point format of type T. */
+template<typename T> void
+host_float_ops<T>::from_target (const struct floatformat *fmt,
+ const gdb_byte *from, T *to) const
+{
+ gdb_assert (fmt != NULL);
+
+ if (fmt == host_float_format)
+ {
+ float val = 0;
+
+ memcpy (&val, from, floatformat_totalsize_bytes (fmt));
+ *to = val;
+ return;
+ }
+ else if (fmt == host_double_format)
+ {
+ double val = 0;
+
+ memcpy (&val, from, floatformat_totalsize_bytes (fmt));
+ *to = val;
+ return;
+ }
+ else if (fmt == host_long_double_format)
+ {
+ long double val = 0;
+
+ memcpy (&val, from, floatformat_totalsize_bytes (fmt));
+ *to = val;
+ return;
+ }
+
+ unsigned char *ufrom = (unsigned char *) from;
+ long exponent;
+ unsigned long mant;
+ unsigned int mant_bits, mant_off;
+ int mant_bits_left;
+ int special_exponent; /* It's a NaN, denorm or zero. */
+ enum floatformat_byteorders order;
+ unsigned char newfrom[FLOATFORMAT_LARGEST_BYTES];
+ enum float_kind kind;
+
+ gdb_assert (fmt->totalsize
+ <= FLOATFORMAT_LARGEST_BYTES * FLOATFORMAT_CHAR_BIT);
+
+ /* For non-numbers, reuse libiberty's logic to find the correct
+ format. We do not lose any precision in this case by passing
+ through a double. */
+ kind = floatformat_classify (fmt, (const bfd_byte *) from);
+ if (kind == float_infinite || kind == float_nan)
+ {
+ double dto;
+
+ floatformat_to_double /* ARI: floatformat_to_double */
+ (fmt->split_half ? fmt->split_half : fmt, from, &dto);
+ *to = (T) dto;
+ return;
+ }
+
+ order = floatformat_normalize_byteorder (fmt, ufrom, newfrom);
+
+ if (order != fmt->byteorder)
+ ufrom = newfrom;
+
+ if (fmt->split_half)
+ {
+ T dtop, dbot;
+
+ from_target (fmt->split_half, ufrom, &dtop);
+ /* Preserve the sign of 0, which is the sign of the top
+ half. */
+ if (dtop == 0.0)
+ {
+ *to = dtop;
+ return;
+ }
+ from_target (fmt->split_half,
+ ufrom + fmt->totalsize / FLOATFORMAT_CHAR_BIT / 2, &dbot);
+ *to = dtop + dbot;
+ return;
+ }
+
+ exponent = get_field (ufrom, order, fmt->totalsize, fmt->exp_start,
+ fmt->exp_len);
+ /* Note that if exponent indicates a NaN, we can't really do anything useful
+ (not knowing if the host has NaN's, or how to build one). So it will
+ end up as an infinity or something close; that is OK. */
+
+ mant_bits_left = fmt->man_len;
+ mant_off = fmt->man_start;
+ T dto = 0.0;
+
+ special_exponent = exponent == 0 || exponent == fmt->exp_nan;
+
+ /* Don't bias NaNs. Use minimum exponent for denorms. For
+ simplicity, we don't check for zero as the exponent doesn't matter.
+ Note the cast to int; exp_bias is unsigned, so it's important to
+ make sure the operation is done in signed arithmetic. */
+ if (!special_exponent)
+ exponent -= fmt->exp_bias;
+ else if (exponent == 0)
+ exponent = 1 - fmt->exp_bias;
+
+ /* Build the result algebraically. Might go infinite, underflow, etc;
+ who cares. */
+
+ /* If this format uses a hidden bit, explicitly add it in now. Otherwise,
+ increment the exponent by one to account for the integer bit. */
+
+ if (!special_exponent)
+ {
+ if (fmt->intbit == floatformat_intbit_no)
+ dto = ldexp (1.0, exponent);
+ else
+ exponent++;
+ }
+
+ while (mant_bits_left > 0)
+ {
+ mant_bits = std::min (mant_bits_left, 32);
+
+ mant = get_field (ufrom, order, fmt->totalsize, mant_off, mant_bits);
+
+ dto += ldexp ((T) mant, exponent - mant_bits);
+ exponent -= mant_bits;
+ mant_off += mant_bits;
+ mant_bits_left -= mant_bits;
+ }
+
+ /* Negate it if negative. */
+ if (get_field (ufrom, order, fmt->totalsize, fmt->sign_start, 1))
+ dto = -dto;
+ *to = dto;
+}
+
+template<typename T> void
+host_float_ops<T>::from_target (const struct type *type,
+ const gdb_byte *from, T *to) const
+{
+ from_target (floatformat_from_type (type), from, to);
+}
+
+/* Convert host floating-point value of type T to target floating-point
+ value in format FMT and store at TO. */
+template<typename T> void
+host_float_ops<T>::to_target (const struct floatformat *fmt,
+ const T *from, gdb_byte *to) const
+{
+ gdb_assert (fmt != NULL);
+
+ if (fmt == host_float_format)
+ {
+ float val = *from;
+
+ memcpy (to, &val, floatformat_totalsize_bytes (fmt));
+ return;
+ }
+ else if (fmt == host_double_format)
+ {
+ double val = *from;
+
+ memcpy (to, &val, floatformat_totalsize_bytes (fmt));
+ return;
+ }
+ else if (fmt == host_long_double_format)
+ {
+ long double val = *from;
+
+ memcpy (to, &val, floatformat_totalsize_bytes (fmt));
+ return;
+ }
+
+ T dfrom;
+ int exponent;
+ T mant;
+ unsigned int mant_bits, mant_off;
+ int mant_bits_left;
+ unsigned char *uto = (unsigned char *) to;
+ enum floatformat_byteorders order = fmt->byteorder;
+ unsigned char newto[FLOATFORMAT_LARGEST_BYTES];
+
+ if (order != floatformat_little)
+ order = floatformat_big;
+
+ if (order != fmt->byteorder)
+ uto = newto;
+
+ memcpy (&dfrom, from, sizeof (dfrom));
+ memset (uto, 0, floatformat_totalsize_bytes (fmt));
+
+ if (fmt->split_half)
+ {
+ /* Use static volatile to ensure that any excess precision is
+ removed via storing in memory, and so the top half really is
+ the result of converting to double. */
+ static volatile double dtop, dbot;
+ T dtopnv, dbotnv;
+
+ dtop = (double) dfrom;
+ /* If the rounded top half is Inf, the bottom must be 0 not NaN
+ or Inf. */
+ if (dtop + dtop == dtop && dtop != 0.0)
+ dbot = 0.0;
+ else
+ dbot = (double) (dfrom - (T) dtop);
+ dtopnv = dtop;
+ dbotnv = dbot;
+ to_target (fmt->split_half, &dtopnv, uto);
+ to_target (fmt->split_half, &dbotnv,
+ uto + fmt->totalsize / FLOATFORMAT_CHAR_BIT / 2);
+ return;
+ }
+
+ if (dfrom == 0)
+ goto finalize_byteorder; /* Result is zero */
+ if (dfrom != dfrom) /* Result is NaN */
+ {
+ /* From is NaN */
+ put_field (uto, order, fmt->totalsize, fmt->exp_start,
+ fmt->exp_len, fmt->exp_nan);
+ /* Be sure it's not infinity, but NaN value is irrel. */
+ put_field (uto, order, fmt->totalsize, fmt->man_start,
+ fmt->man_len, 1);
+ goto finalize_byteorder;
+ }
+
+ /* If negative, set the sign bit. */
+ if (dfrom < 0)
+ {
+ put_field (uto, order, fmt->totalsize, fmt->sign_start, 1, 1);
+ dfrom = -dfrom;
+ }
+
+ if (dfrom + dfrom == dfrom && dfrom != 0.0) /* Result is Infinity. */
+ {
+ /* Infinity exponent is same as NaN's. */
+ put_field (uto, order, fmt->totalsize, fmt->exp_start,
+ fmt->exp_len, fmt->exp_nan);
+ /* Infinity mantissa is all zeroes. */
+ put_field (uto, order, fmt->totalsize, fmt->man_start,
+ fmt->man_len, 0);
+ goto finalize_byteorder;
+ }
+
+ mant = frexp (dfrom, &exponent);
+
+ if (exponent + fmt->exp_bias <= 0)
+ {
+ /* The value is too small to be expressed in the destination
+ type (not enough bits in the exponent. Treat as 0. */
+ put_field (uto, order, fmt->totalsize, fmt->exp_start,
+ fmt->exp_len, 0);
+ put_field (uto, order, fmt->totalsize, fmt->man_start,
+ fmt->man_len, 0);
+ goto finalize_byteorder;
+ }
+
+ if (exponent + fmt->exp_bias >= (1 << fmt->exp_len))
+ {
+ /* The value is too large to fit into the destination.
+ Treat as infinity. */
+ put_field (uto, order, fmt->totalsize, fmt->exp_start,
+ fmt->exp_len, fmt->exp_nan);
+ put_field (uto, order, fmt->totalsize, fmt->man_start,
+ fmt->man_len, 0);
+ goto finalize_byteorder;
+ }
+
+ put_field (uto, order, fmt->totalsize, fmt->exp_start, fmt->exp_len,
+ exponent + fmt->exp_bias - 1);
+
+ mant_bits_left = fmt->man_len;
+ mant_off = fmt->man_start;
+ while (mant_bits_left > 0)
+ {
+ unsigned long mant_long;
+
+ mant_bits = mant_bits_left < 32 ? mant_bits_left : 32;
+
+ mant *= 4294967296.0;
+ mant_long = ((unsigned long) mant) & 0xffffffffL;
+ mant -= mant_long;
+
+ /* If the integer bit is implicit, then we need to discard it.
+ If we are discarding a zero, we should be (but are not) creating
+ a denormalized number which means adjusting the exponent
+ (I think). */
+ if (mant_bits_left == fmt->man_len
+ && fmt->intbit == floatformat_intbit_no)
+ {
+ mant_long <<= 1;
+ mant_long &= 0xffffffffL;
+ /* If we are processing the top 32 mantissa bits of a doublest
+ so as to convert to a float value with implied integer bit,
+ we will only be putting 31 of those 32 bits into the
+ final value due to the discarding of the top bit. In the
+ case of a small float value where the number of mantissa
+ bits is less than 32, discarding the top bit does not alter
+ the number of bits we will be adding to the result. */
+ if (mant_bits == 32)
+ mant_bits -= 1;
+ }
+
+ if (mant_bits < 32)
+ {
+ /* The bits we want are in the most significant MANT_BITS bits of
+ mant_long. Move them to the least significant. */
+ mant_long >>= 32 - mant_bits;
+ }
+
+ put_field (uto, order, fmt->totalsize,
+ mant_off, mant_bits, mant_long);
+ mant_off += mant_bits;
+ mant_bits_left -= mant_bits;
+ }
+
+ finalize_byteorder:
+ /* Do we need to byte-swap the words in the result? */
+ if (order != fmt->byteorder)
+ floatformat_normalize_byteorder (fmt, newto, to);
+}
+
+template<typename T> void
+host_float_ops<T>::to_target (const struct type *type,
+ const T *from, gdb_byte *to) const
+{
+ /* Ensure possible padding bytes in the target buffer are zeroed out. */
+ memset (to, 0, TYPE_LENGTH (type));
+
+ to_target (floatformat_from_type (type), from, to);
+}
+
+/* Convert the byte-stream ADDR, interpreted as floating-point type TYPE,
+ to a string, optionally using the print format FORMAT. */
+template<typename T> struct printf_length_modifier
+{
+ static constexpr char value = 0;
+};
+template<> struct printf_length_modifier<long double>
+{
+ static constexpr char value = 'L';
+};
+template<typename T> std::string
+host_float_ops<T>::to_string (const gdb_byte *addr, const struct type *type,
+ const char *format) const
+{
+ /* Determine the format string to use on the host side. */
+ constexpr char length = printf_length_modifier<T>::value;
+ const struct floatformat *fmt = floatformat_from_type (type);
+ std::string host_format = floatformat_printf_format (fmt, format, length);
+
+ T host_float;
+ from_target (type, addr, &host_float);
+
+ DIAGNOSTIC_PUSH
+ DIAGNOSTIC_IGNORE_FORMAT_NONLITERAL
+ return string_printf (host_format.c_str (), host_float);
+ DIAGNOSTIC_POP
+}
+
+/* Parse string IN into a target floating-number of type TYPE and
+ store it as byte-stream ADDR. Return whether parsing succeeded. */
+template<typename T> struct scanf_length_modifier
+{
+ static constexpr char value = 0;
+};
+template<> struct scanf_length_modifier<double>
+{
+ static constexpr char value = 'l';
+};
+template<> struct scanf_length_modifier<long double>
+{
+ static constexpr char value = 'L';
+};
+template<typename T> bool
+host_float_ops<T>::from_string (gdb_byte *addr, const struct type *type,
+ const std::string &in) const
+{
+ T host_float;
+ int n, num;
+
+ std::string scan_format = "%";
+ if (scanf_length_modifier<T>::value)
+ scan_format += scanf_length_modifier<T>::value;
+ scan_format += "g%n";
+
+ DIAGNOSTIC_PUSH
+ DIAGNOSTIC_IGNORE_FORMAT_NONLITERAL
+ num = sscanf (in.c_str (), scan_format.c_str(), &host_float, &n);
+ DIAGNOSTIC_POP
+
+ /* The sscanf man page suggests not making any assumptions on the effect
+ of %n on the result, so we don't.
+ That is why we simply test num == 0. */
+ if (num == 0)
+ return false;
+
+ /* We only accept the whole string. */
+ if (in[n])
+ return false;
+
+ to_target (type, &host_float, addr);
+ return true;
+}
+
+/* Convert the byte-stream ADDR, interpreted as floating-point type TYPE,
+ to an integer value (rounding towards zero). */
+template<typename T> LONGEST
+host_float_ops<T>::to_longest (const gdb_byte *addr,
+ const struct type *type) const
+{
+ T host_float;
+ from_target (type, addr, &host_float);
+ T min_possible_range = static_cast<T>(std::numeric_limits<LONGEST>::min());
+ T max_possible_range = -min_possible_range;
+ /* host_float can be converted to an integer as long as it's in
+ the range [min_possible_range, max_possible_range). If not, it is either
+ too large, or too small, or is NaN; in this case return the maximum or
+ minimum possible value. */
+ if (host_float < max_possible_range && host_float >= min_possible_range)
+ return static_cast<LONGEST> (host_float);
+ if (host_float < min_possible_range)
+ return std::numeric_limits<LONGEST>::min();
+ /* This line will be executed if host_float is NaN. */
+ return std::numeric_limits<LONGEST>::max();
+}
+
+/* Convert signed integer VAL to a target floating-number of type TYPE
+ and store it as byte-stream ADDR. */
+template<typename T> void
+host_float_ops<T>::from_longest (gdb_byte *addr, const struct type *type,
+ LONGEST val) const
+{
+ T host_float = (T) val;
+ to_target (type, &host_float, addr);
+}
+
+/* Convert unsigned integer VAL to a target floating-number of type TYPE
+ and store it as byte-stream ADDR. */
+template<typename T> void
+host_float_ops<T>::from_ulongest (gdb_byte *addr, const struct type *type,
+ ULONGEST val) const
+{
+ T host_float = (T) val;
+ to_target (type, &host_float, addr);
+}
+
+/* Convert the byte-stream ADDR, interpreted as floating-point type TYPE,
+ to a floating-point value in the host "double" format. */
+template<typename T> double
+host_float_ops<T>::to_host_double (const gdb_byte *addr,
+ const struct type *type) const
+{
+ T host_float;
+ from_target (type, addr, &host_float);
+ return (double) host_float;
+}
+
+/* Convert floating-point value VAL in the host "double" format to a target
+ floating-number of type TYPE and store it as byte-stream ADDR. */
+template<typename T> void
+host_float_ops<T>::from_host_double (gdb_byte *addr, const struct type *type,
+ double val) const
+{
+ T host_float = (T) val;
+ to_target (type, &host_float, addr);
+}
+
+/* Convert a floating-point number of type FROM_TYPE from the target
+ byte-stream FROM to a floating-point number of type TO_TYPE, and
+ store it to the target byte-stream TO. */
+template<typename T> void
+host_float_ops<T>::convert (const gdb_byte *from,
+ const struct type *from_type,
+ gdb_byte *to,
+ const struct type *to_type) const
+{
+ T host_float;
+ from_target (from_type, from, &host_float);
+ to_target (to_type, &host_float, to);
+}
+
+/* Perform the binary operation indicated by OPCODE, using as operands the
+ target byte streams X and Y, interpreted as floating-point numbers of
+ types TYPE_X and TYPE_Y, respectively. Convert the result to format
+ TYPE_RES and store it into the byte-stream RES. */
+template<typename T> void
+host_float_ops<T>::binop (enum exp_opcode op,
+ const gdb_byte *x, const struct type *type_x,
+ const gdb_byte *y, const struct type *type_y,
+ gdb_byte *res, const struct type *type_res) const
+{
+ T v1, v2, v = 0;
+
+ from_target (type_x, x, &v1);
+ from_target (type_y, y, &v2);
+
+ switch (op)
+ {
+ case BINOP_ADD:
+ v = v1 + v2;
+ break;
+
+ case BINOP_SUB:
+ v = v1 - v2;
+ break;
+
+ case BINOP_MUL:
+ v = v1 * v2;
+ break;
+
+ case BINOP_DIV:
+ v = v1 / v2;
+ break;
+
+ case BINOP_EXP:
+ errno = 0;
+ v = pow (v1, v2);
+ if (errno)
+ error (_("Cannot perform exponentiation: %s"),
+ safe_strerror (errno));
+ break;
+
+ case BINOP_MIN:
+ v = v1 < v2 ? v1 : v2;
+ break;
+
+ case BINOP_MAX:
+ v = v1 > v2 ? v1 : v2;
+ break;
+
+ default:
+ error (_("Integer-only operation on floating point number."));
+ break;
+ }
+
+ to_target (type_res, &v, res);
+}
+
+/* Compare the two target byte streams X and Y, interpreted as floating-point
+ numbers of types TYPE_X and TYPE_Y, respectively. Return zero if X and Y
+ are equal, -1 if X is less than Y, and 1 otherwise. */
+template<typename T> int
+host_float_ops<T>::compare (const gdb_byte *x, const struct type *type_x,
+ const gdb_byte *y, const struct type *type_y) const
+{
+ T v1, v2;
+
+ from_target (type_x, x, &v1);
+ from_target (type_y, y, &v2);
+
+ if (v1 == v2)
+ return 0;
+ if (v1 < v2)
+ return -1;
+ return 1;
+}
+
+
+/* Implementation of target_float_ops using the MPFR library
+ mpfr_t as intermediate type. */
+
+#ifdef HAVE_LIBMPFR
+
+#define MPFR_USE_INTMAX_T
+
+#include <mpfr.h>
+
+class mpfr_float_ops : public target_float_ops
+{
+public:
+ std::string to_string (const gdb_byte *addr, const struct type *type,
+ const char *format) const override;
+ bool from_string (gdb_byte *addr, const struct type *type,
+ const std::string &string) const override;
+
+ LONGEST to_longest (const gdb_byte *addr,
+ const struct type *type) const override;
+ void from_longest (gdb_byte *addr, const struct type *type,
+ LONGEST val) const override;
+ void from_ulongest (gdb_byte *addr, const struct type *type,
+ ULONGEST val) const override;
+ double to_host_double (const gdb_byte *addr,
+ const struct type *type) const override;
+ void from_host_double (gdb_byte *addr, const struct type *type,
+ double val) const override;
+ void convert (const gdb_byte *from, const struct type *from_type,
+ gdb_byte *to, const struct type *to_type) const override;
+
+ void binop (enum exp_opcode opcode,
+ const gdb_byte *x, const struct type *type_x,
+ const gdb_byte *y, const struct type *type_y,
+ gdb_byte *res, const struct type *type_res) const override;
+ int compare (const gdb_byte *x, const struct type *type_x,
+ const gdb_byte *y, const struct type *type_y) const override;
+
+private:
+ /* Local wrapper class to handle mpfr_t initalization and cleanup. */
+ class gdb_mpfr
+ {
+ public:
+ mpfr_t val;
+
+ gdb_mpfr (const struct type *type)
+ {
+ const struct floatformat *fmt = floatformat_from_type (type);
+ mpfr_init2 (val, floatformat_precision (fmt));
+ }
+
+ gdb_mpfr (const gdb_mpfr &source)
+ {
+ mpfr_init2 (val, mpfr_get_prec (source.val));
+ }
+
+ ~gdb_mpfr ()
+ {
+ mpfr_clear (val);
+ }
+ };
+
+ void from_target (const struct floatformat *fmt,
+ const gdb_byte *from, gdb_mpfr &to) const;
+ void from_target (const struct type *type,
+ const gdb_byte *from, gdb_mpfr &to) const;
+
+ void to_target (const struct type *type,
+ const gdb_mpfr &from, gdb_byte *to) const;
+ void to_target (const struct floatformat *fmt,
+ const gdb_mpfr &from, gdb_byte *to) const;
+};
+
+
+/* Convert TO/FROM target floating-point format to mpfr_t. */
+
+void
+mpfr_float_ops::from_target (const struct floatformat *fmt,
+ const gdb_byte *orig_from, gdb_mpfr &to) const
+{
+ const gdb_byte *from = orig_from;
+ mpfr_exp_t exponent;
+ unsigned long mant;
+ unsigned int mant_bits, mant_off;
+ int mant_bits_left;
+ int special_exponent; /* It's a NaN, denorm or zero. */
+ enum floatformat_byteorders order;
+ unsigned char newfrom[FLOATFORMAT_LARGEST_BYTES];
+ enum float_kind kind;
+
+ gdb_assert (fmt->totalsize
+ <= FLOATFORMAT_LARGEST_BYTES * FLOATFORMAT_CHAR_BIT);
+
+ /* Handle non-numbers. */
+ kind = floatformat_classify (fmt, from);
+ if (kind == float_infinite)
+ {
+ mpfr_set_inf (to.val, floatformat_is_negative (fmt, from) ? -1 : 1);
+ return;
+ }
+ if (kind == float_nan)
+ {
+ mpfr_set_nan (to.val);
+ return;
+ }
+
+ order = floatformat_normalize_byteorder (fmt, from, newfrom);
+
+ if (order != fmt->byteorder)
+ from = newfrom;
+
+ if (fmt->split_half)
+ {
+ gdb_mpfr top (to), bot (to);
+
+ from_target (fmt->split_half, from, top);
+ /* Preserve the sign of 0, which is the sign of the top half. */
+ if (mpfr_zero_p (top.val))
+ {
+ mpfr_set (to.val, top.val, MPFR_RNDN);
+ return;
+ }
+ from_target (fmt->split_half,
+ from + fmt->totalsize / FLOATFORMAT_CHAR_BIT / 2, bot);
+ mpfr_add (to.val, top.val, bot.val, MPFR_RNDN);
+ return;
+ }
+
+ exponent = get_field (from, order, fmt->totalsize, fmt->exp_start,
+ fmt->exp_len);
+ /* Note that if exponent indicates a NaN, we can't really do anything useful
+ (not knowing if the host has NaN's, or how to build one). So it will
+ end up as an infinity or something close; that is OK. */
+
+ mant_bits_left = fmt->man_len;
+ mant_off = fmt->man_start;
+ mpfr_set_zero (to.val, 0);
+
+ special_exponent = exponent == 0 || exponent == fmt->exp_nan;
+
+ /* Don't bias NaNs. Use minimum exponent for denorms. For
+ simplicity, we don't check for zero as the exponent doesn't matter.
+ Note the cast to int; exp_bias is unsigned, so it's important to
+ make sure the operation is done in signed arithmetic. */
+ if (!special_exponent)
+ exponent -= fmt->exp_bias;
+ else if (exponent == 0)
+ exponent = 1 - fmt->exp_bias;
+
+ /* Build the result algebraically. Might go infinite, underflow, etc;
+ who cares. */
+
+ /* If this format uses a hidden bit, explicitly add it in now. Otherwise,
+ increment the exponent by one to account for the integer bit. */
+
+ if (!special_exponent)
+ {
+ if (fmt->intbit == floatformat_intbit_no)
+ mpfr_set_ui_2exp (to.val, 1, exponent, MPFR_RNDN);
+ else
+ exponent++;
+ }
+
+ gdb_mpfr tmp (to);
+
+ while (mant_bits_left > 0)
+ {
+ mant_bits = std::min (mant_bits_left, 32);
+
+ mant = get_field (from, order, fmt->totalsize, mant_off, mant_bits);
+
+ mpfr_set_ui (tmp.val, mant, MPFR_RNDN);
+ mpfr_mul_2si (tmp.val, tmp.val, exponent - mant_bits, MPFR_RNDN);
+ mpfr_add (to.val, to.val, tmp.val, MPFR_RNDN);
+ exponent -= mant_bits;
+ mant_off += mant_bits;
+ mant_bits_left -= mant_bits;
+ }
+
+ /* Negate it if negative. */
+ if (get_field (from, order, fmt->totalsize, fmt->sign_start, 1))
+ mpfr_neg (to.val, to.val, MPFR_RNDN);
+}
+
+void
+mpfr_float_ops::from_target (const struct type *type,
+ const gdb_byte *from, gdb_mpfr &to) const
+{
+ from_target (floatformat_from_type (type), from, to);
+}
+
+void
+mpfr_float_ops::to_target (const struct floatformat *fmt,
+ const gdb_mpfr &from, gdb_byte *orig_to) const
+{
+ unsigned char *to = orig_to;
+ mpfr_exp_t exponent;
+ unsigned int mant_bits, mant_off;
+ int mant_bits_left;
+ enum floatformat_byteorders order = fmt->byteorder;
+ unsigned char newto[FLOATFORMAT_LARGEST_BYTES];
+
+ if (order != floatformat_little)
+ order = floatformat_big;
+
+ if (order != fmt->byteorder)
+ to = newto;
+
+ memset (to, 0, floatformat_totalsize_bytes (fmt));
+
+ if (fmt->split_half)
+ {
+ gdb_mpfr top (from), bot (from);
+
+ mpfr_set (top.val, from.val, MPFR_RNDN);
+ /* If the rounded top half is Inf, the bottom must be 0 not NaN
+ or Inf. */
+ if (mpfr_inf_p (top.val))
+ mpfr_set_zero (bot.val, 0);
+ else
+ mpfr_sub (bot.val, from.val, top.val, MPFR_RNDN);
+
+ to_target (fmt->split_half, top, to);
+ to_target (fmt->split_half, bot,
+ to + fmt->totalsize / FLOATFORMAT_CHAR_BIT / 2);
+ return;
+ }
+
+ gdb_mpfr tmp (from);
+
+ if (mpfr_zero_p (from.val))
+ goto finalize_byteorder; /* Result is zero */
+
+ mpfr_set (tmp.val, from.val, MPFR_RNDN);
+
+ if (mpfr_nan_p (tmp.val)) /* Result is NaN */
+ {
+ /* From is NaN */
+ put_field (to, order, fmt->totalsize, fmt->exp_start,
+ fmt->exp_len, fmt->exp_nan);
+ /* Be sure it's not infinity, but NaN value is irrel. */
+ put_field (to, order, fmt->totalsize, fmt->man_start,
+ fmt->man_len, 1);
+ goto finalize_byteorder;
+ }
+
+ /* If negative, set the sign bit. */
+ if (mpfr_sgn (tmp.val) < 0)
+ {
+ put_field (to, order, fmt->totalsize, fmt->sign_start, 1, 1);
+ mpfr_neg (tmp.val, tmp.val, MPFR_RNDN);
+ }
+
+ if (mpfr_inf_p (tmp.val)) /* Result is Infinity. */
+ {
+ /* Infinity exponent is same as NaN's. */
+ put_field (to, order, fmt->totalsize, fmt->exp_start,
+ fmt->exp_len, fmt->exp_nan);
+ /* Infinity mantissa is all zeroes. */
+ put_field (to, order, fmt->totalsize, fmt->man_start,
+ fmt->man_len, 0);
+ goto finalize_byteorder;
+ }
+
+ mpfr_frexp (&exponent, tmp.val, tmp.val, MPFR_RNDN);
+
+ if (exponent + fmt->exp_bias <= 0)
+ {
+ /* The value is too small to be expressed in the destination
+ type (not enough bits in the exponent. Treat as 0. */
+ put_field (to, order, fmt->totalsize, fmt->exp_start,
+ fmt->exp_len, 0);
+ put_field (to, order, fmt->totalsize, fmt->man_start,
+ fmt->man_len, 0);
+ goto finalize_byteorder;
+ }
+
+ if (exponent + fmt->exp_bias >= (1 << fmt->exp_len))
+ {
+ /* The value is too large to fit into the destination.
+ Treat as infinity. */
+ put_field (to, order, fmt->totalsize, fmt->exp_start,
+ fmt->exp_len, fmt->exp_nan);
+ put_field (to, order, fmt->totalsize, fmt->man_start,
+ fmt->man_len, 0);
+ goto finalize_byteorder;
+ }
+
+ put_field (to, order, fmt->totalsize, fmt->exp_start, fmt->exp_len,
+ exponent + fmt->exp_bias - 1);
+
+ mant_bits_left = fmt->man_len;
+ mant_off = fmt->man_start;
+ while (mant_bits_left > 0)
+ {
+ unsigned long mant_long;
+
+ mant_bits = mant_bits_left < 32 ? mant_bits_left : 32;
+
+ mpfr_mul_2ui (tmp.val, tmp.val, 32, MPFR_RNDN);
+ mant_long = mpfr_get_ui (tmp.val, MPFR_RNDZ) & 0xffffffffL;
+ mpfr_sub_ui (tmp.val, tmp.val, mant_long, MPFR_RNDZ);
+
+ /* If the integer bit is implicit, then we need to discard it.
+ If we are discarding a zero, we should be (but are not) creating
+ a denormalized number which means adjusting the exponent
+ (I think). */
+ if (mant_bits_left == fmt->man_len
+ && fmt->intbit == floatformat_intbit_no)
+ {
+ mant_long <<= 1;
+ mant_long &= 0xffffffffL;
+ /* If we are processing the top 32 mantissa bits of a doublest
+ so as to convert to a float value with implied integer bit,
+ we will only be putting 31 of those 32 bits into the
+ final value due to the discarding of the top bit. In the
+ case of a small float value where the number of mantissa
+ bits is less than 32, discarding the top bit does not alter
+ the number of bits we will be adding to the result. */
+ if (mant_bits == 32)
+ mant_bits -= 1;
+ }
+
+ if (mant_bits < 32)
+ {
+ /* The bits we want are in the most significant MANT_BITS bits of
+ mant_long. Move them to the least significant. */
+ mant_long >>= 32 - mant_bits;
+ }
+
+ put_field (to, order, fmt->totalsize,
+ mant_off, mant_bits, mant_long);
+ mant_off += mant_bits;
+ mant_bits_left -= mant_bits;
+ }
+
+ finalize_byteorder:
+ /* Do we need to byte-swap the words in the result? */
+ if (order != fmt->byteorder)
+ floatformat_normalize_byteorder (fmt, newto, orig_to);
+}
+
+void
+mpfr_float_ops::to_target (const struct type *type,
+ const gdb_mpfr &from, gdb_byte *to) const
+{
+ /* Ensure possible padding bytes in the target buffer are zeroed out. */
+ memset (to, 0, TYPE_LENGTH (type));
+
+ to_target (floatformat_from_type (type), from, to);
+}
+
+/* Convert the byte-stream ADDR, interpreted as floating-point type TYPE,
+ to a string, optionally using the print format FORMAT. */
+std::string
+mpfr_float_ops::to_string (const gdb_byte *addr,
+ const struct type *type,
+ const char *format) const
+{
+ const struct floatformat *fmt = floatformat_from_type (type);
+
+ /* Unless we need to adhere to a specific format, provide special
+ output for certain cases. */
+ if (format == nullptr)
+ {
+ /* Detect invalid representations. */
+ if (!floatformat_is_valid (fmt, addr))
+ return "<invalid float value>";
+
+ /* Handle NaN and Inf. */
+ enum float_kind kind = floatformat_classify (fmt, addr);
+ if (kind == float_nan)
+ {
+ const char *sign = floatformat_is_negative (fmt, addr)? "-" : "";
+ const char *mantissa = floatformat_mantissa (fmt, addr);
+ return string_printf ("%snan(0x%s)", sign, mantissa);
+ }
+ else if (kind == float_infinite)
+ {
+ const char *sign = floatformat_is_negative (fmt, addr)? "-" : "";
+ return string_printf ("%sinf", sign);
+ }
+ }
+
+ /* Determine the format string to use on the host side. */
+ std::string host_format = floatformat_printf_format (fmt, format, 'R');
+
+ gdb_mpfr tmp (type);
+ from_target (type, addr, tmp);
+
+ int size = mpfr_snprintf (NULL, 0, host_format.c_str (), tmp.val);
+ std::string str (size, '\0');
+ mpfr_sprintf (&str[0], host_format.c_str (), tmp.val);
+
+ return str;
+}
+
+/* Parse string STRING into a target floating-number of type TYPE and
+ store it as byte-stream ADDR. Return whether parsing succeeded. */
+bool
+mpfr_float_ops::from_string (gdb_byte *addr,
+ const struct type *type,
+ const std::string &in) const
+{
+ gdb_mpfr tmp (type);
+
+ char *endptr;
+ mpfr_strtofr (tmp.val, in.c_str (), &endptr, 0, MPFR_RNDN);
+
+ /* We only accept the whole string. */
+ if (*endptr)
+ return false;
+
+ to_target (type, tmp, addr);
+ return true;
+}
+
+/* Convert the byte-stream ADDR, interpreted as floating-point type TYPE,
+ to an integer value (rounding towards zero). */
+LONGEST
+mpfr_float_ops::to_longest (const gdb_byte *addr,
+ const struct type *type) const
+{
+ gdb_mpfr tmp (type);
+ from_target (type, addr, tmp);
+ return mpfr_get_sj (tmp.val, MPFR_RNDZ);
+}
+
+/* Convert signed integer VAL to a target floating-number of type TYPE
+ and store it as byte-stream ADDR. */
+void
+mpfr_float_ops::from_longest (gdb_byte *addr,
+ const struct type *type,
+ LONGEST val) const
+{
+ gdb_mpfr tmp (type);
+ mpfr_set_sj (tmp.val, val, MPFR_RNDN);
+ to_target (type, tmp, addr);
+}
+
+/* Convert unsigned integer VAL to a target floating-number of type TYPE
+ and store it as byte-stream ADDR. */
+void
+mpfr_float_ops::from_ulongest (gdb_byte *addr,
+ const struct type *type,
+ ULONGEST val) const
+{
+ gdb_mpfr tmp (type);
+ mpfr_set_uj (tmp.val, val, MPFR_RNDN);
+ to_target (type, tmp, addr);
+}
+
+/* Convert the byte-stream ADDR, interpreted as floating-point type TYPE,
+ to a floating-point value in the host "double" format. */
+double
+mpfr_float_ops::to_host_double (const gdb_byte *addr,
+ const struct type *type) const
+{
+ gdb_mpfr tmp (type);
+ from_target (type, addr, tmp);
+ return mpfr_get_d (tmp.val, MPFR_RNDN);
+}
+
+/* Convert floating-point value VAL in the host "double" format to a target
+ floating-number of type TYPE and store it as byte-stream ADDR. */
+void
+mpfr_float_ops::from_host_double (gdb_byte *addr,
+ const struct type *type,
+ double val) const
+{
+ gdb_mpfr tmp (type);
+ mpfr_set_d (tmp.val, val, MPFR_RNDN);
+ to_target (type, tmp, addr);
+}
+
+/* Convert a floating-point number of type FROM_TYPE from the target
+ byte-stream FROM to a floating-point number of type TO_TYPE, and
+ store it to the target byte-stream TO. */
+void
+mpfr_float_ops::convert (const gdb_byte *from,
+ const struct type *from_type,
+ gdb_byte *to,
+ const struct type *to_type) const
+{
+ gdb_mpfr from_tmp (from_type), to_tmp (to_type);
+ from_target (from_type, from, from_tmp);
+ mpfr_set (to_tmp.val, from_tmp.val, MPFR_RNDN);
+ to_target (to_type, to_tmp, to);
+}
+
+/* Perform the binary operation indicated by OPCODE, using as operands the
+ target byte streams X and Y, interpreted as floating-point numbers of
+ types TYPE_X and TYPE_Y, respectively. Convert the result to type
+ TYPE_RES and store it into the byte-stream RES. */
+void
+mpfr_float_ops::binop (enum exp_opcode op,
+ const gdb_byte *x, const struct type *type_x,
+ const gdb_byte *y, const struct type *type_y,
+ gdb_byte *res, const struct type *type_res) const
+{
+ gdb_mpfr x_tmp (type_x), y_tmp (type_y), tmp (type_res);
+
+ from_target (type_x, x, x_tmp);
+ from_target (type_y, y, y_tmp);
+
+ switch (op)
+ {
+ case BINOP_ADD:
+ mpfr_add (tmp.val, x_tmp.val, y_tmp.val, MPFR_RNDN);
+ break;
+
+ case BINOP_SUB:
+ mpfr_sub (tmp.val, x_tmp.val, y_tmp.val, MPFR_RNDN);
+ break;
+
+ case BINOP_MUL:
+ mpfr_mul (tmp.val, x_tmp.val, y_tmp.val, MPFR_RNDN);
+ break;
+
+ case BINOP_DIV:
+ mpfr_div (tmp.val, x_tmp.val, y_tmp.val, MPFR_RNDN);
+ break;
+
+ case BINOP_EXP:
+ mpfr_pow (tmp.val, x_tmp.val, y_tmp.val, MPFR_RNDN);
+ break;
+
+ case BINOP_MIN:
+ mpfr_min (tmp.val, x_tmp.val, y_tmp.val, MPFR_RNDN);
+ break;
+
+ case BINOP_MAX:
+ mpfr_max (tmp.val, x_tmp.val, y_tmp.val, MPFR_RNDN);
+ break;
+
+ default:
+ error (_("Integer-only operation on floating point number."));
+ break;
+ }
+
+ to_target (type_res, tmp, res);
+}
+
+/* Compare the two target byte streams X and Y, interpreted as floating-point
+ numbers of types TYPE_X and TYPE_Y, respectively. Return zero if X and Y
+ are equal, -1 if X is less than Y, and 1 otherwise. */
+int
+mpfr_float_ops::compare (const gdb_byte *x, const struct type *type_x,
+ const gdb_byte *y, const struct type *type_y) const
+{
+ gdb_mpfr x_tmp (type_x), y_tmp (type_y);
+
+ from_target (type_x, x, x_tmp);
+ from_target (type_y, y, y_tmp);
+
+ if (mpfr_equal_p (x_tmp.val, y_tmp.val))
+ return 0;
+ else if (mpfr_less_p (x_tmp.val, y_tmp.val))
+ return -1;
+ else
+ return 1;
+}
+
+#endif
+
+
+/* Helper routines operating on decimal floating-point data. */
+
+/* Decimal floating point is one of the extension to IEEE 754, which is
+ described in http://grouper.ieee.org/groups/754/revision.html and
+ http://www2.hursley.ibm.com/decimal/. It completes binary floating
+ point by representing floating point more exactly. */
+
+/* The order of the following headers is important for making sure
+ decNumber structure is large enough to hold decimal128 digits. */
+
+#include "dpd/decimal128.h"
+#include "dpd/decimal64.h"
+#include "dpd/decimal32.h"
+
+/* When using decimal128, this is the maximum string length + 1
+ (value comes from libdecnumber's DECIMAL128_String constant). */
+#define MAX_DECIMAL_STRING 43
+
+/* In GDB, we are using an array of gdb_byte to represent decimal values.
+ They are stored in host byte order. This routine does the conversion if
+ the target byte order is different. */
+static void
+match_endianness (const gdb_byte *from, const struct type *type, gdb_byte *to)
+{
+ gdb_assert (TYPE_CODE (type) == TYPE_CODE_DECFLOAT);
+
+ int len = TYPE_LENGTH (type);
+ int i;
+
+#if WORDS_BIGENDIAN
+#define OPPOSITE_BYTE_ORDER BFD_ENDIAN_LITTLE
+#else
+#define OPPOSITE_BYTE_ORDER BFD_ENDIAN_BIG
+#endif
+
+ if (type_byte_order (type) == OPPOSITE_BYTE_ORDER)
+ for (i = 0; i < len; i++)
+ to[i] = from[len - i - 1];
+ else
+ for (i = 0; i < len; i++)
+ to[i] = from[i];
+
+ return;
+}
+
+/* Helper function to get the appropriate libdecnumber context for each size
+ of decimal float. */
+static void
+set_decnumber_context (decContext *ctx, const struct type *type)
+{
+ gdb_assert (TYPE_CODE (type) == TYPE_CODE_DECFLOAT);
+
+ switch (TYPE_LENGTH (type))
+ {
+ case 4:
+ decContextDefault (ctx, DEC_INIT_DECIMAL32);
+ break;
+ case 8:
+ decContextDefault (ctx, DEC_INIT_DECIMAL64);
+ break;
+ case 16:
+ decContextDefault (ctx, DEC_INIT_DECIMAL128);
+ break;
+ }
+
+ ctx->traps = 0;
+}
+
+/* Check for errors signaled in the decimal context structure. */
+static void
+decimal_check_errors (decContext *ctx)
+{
+ /* An error here could be a division by zero, an overflow, an underflow or
+ an invalid operation (from the DEC_Errors constant in decContext.h).
+ Since GDB doesn't complain about division by zero, overflow or underflow
+ errors for binary floating, we won't complain about them for decimal
+ floating either. */
+ if (ctx->status & DEC_IEEE_854_Invalid_operation)
+ {
+ /* Leave only the error bits in the status flags. */
+ ctx->status &= DEC_IEEE_854_Invalid_operation;
+ error (_("Cannot perform operation: %s"),
+ decContextStatusToString (ctx));
+ }
+}
+
+/* Helper function to convert from libdecnumber's appropriate representation
+ for computation to each size of decimal float. */
+static void
+decimal_from_number (const decNumber *from,
+ gdb_byte *to, const struct type *type)
+{
+ gdb_byte dec[16];
+
+ decContext set;
+
+ set_decnumber_context (&set, type);
+
+ switch (TYPE_LENGTH (type))
+ {
+ case 4:
+ decimal32FromNumber ((decimal32 *) dec, from, &set);
+ break;
+ case 8:
+ decimal64FromNumber ((decimal64 *) dec, from, &set);
+ break;
+ case 16:
+ decimal128FromNumber ((decimal128 *) dec, from, &set);
+ break;
+ default:
+ error (_("Unknown decimal floating point type."));
+ break;
+ }
+
+ match_endianness (dec, type, to);
+}
+
+/* Helper function to convert each size of decimal float to libdecnumber's
+ appropriate representation for computation. */
+static void
+decimal_to_number (const gdb_byte *addr, const struct type *type,
+ decNumber *to)
+{
+ gdb_byte dec[16];
+ match_endianness (addr, type, dec);
+
+ switch (TYPE_LENGTH (type))
+ {
+ case 4:
+ decimal32ToNumber ((decimal32 *) dec, to);
+ break;
+ case 8:
+ decimal64ToNumber ((decimal64 *) dec, to);
+ break;
+ case 16:
+ decimal128ToNumber ((decimal128 *) dec, to);
+ break;
+ default:
+ error (_("Unknown decimal floating point type."));
+ break;
+ }
+}
+
+/* Returns true if ADDR (which is of type TYPE) is the number zero. */
+static bool
+decimal_is_zero (const gdb_byte *addr, const struct type *type)
+{
+ decNumber number;
+
+ decimal_to_number (addr, type, &number);
+
+ return decNumberIsZero (&number);
+}
+
+
+/* Implementation of target_float_ops using the libdecnumber decNumber type
+ as intermediate format. */
+
+class decimal_float_ops : public target_float_ops
+{
+public:
+ std::string to_string (const gdb_byte *addr, const struct type *type,
+ const char *format) const override;
+ bool from_string (gdb_byte *addr, const struct type *type,
+ const std::string &string) const override;
+
+ LONGEST to_longest (const gdb_byte *addr,
+ const struct type *type) const override;
+ void from_longest (gdb_byte *addr, const struct type *type,
+ LONGEST val) const override;
+ void from_ulongest (gdb_byte *addr, const struct type *type,
+ ULONGEST val) const override;
+ double to_host_double (const gdb_byte *addr,
+ const struct type *type) const override
+ {
+ /* We don't support conversions between target decimal floating-point
+ types and the host double type. */
+ gdb_assert_not_reached ("invalid operation on decimal float");
+ }
+ void from_host_double (gdb_byte *addr, const struct type *type,
+ double val) const override
+ {
+ /* We don't support conversions between target decimal floating-point
+ types and the host double type. */
+ gdb_assert_not_reached ("invalid operation on decimal float");
+ }
+ void convert (const gdb_byte *from, const struct type *from_type,
+ gdb_byte *to, const struct type *to_type) const override;
+
+ void binop (enum exp_opcode opcode,
+ const gdb_byte *x, const struct type *type_x,
+ const gdb_byte *y, const struct type *type_y,
+ gdb_byte *res, const struct type *type_res) const override;
+ int compare (const gdb_byte *x, const struct type *type_x,
+ const gdb_byte *y, const struct type *type_y) const override;
+};
+
+/* Convert decimal type to its string representation. LEN is the length
+ of the decimal type, 4 bytes for decimal32, 8 bytes for decimal64 and
+ 16 bytes for decimal128. */
+std::string
+decimal_float_ops::to_string (const gdb_byte *addr, const struct type *type,
+ const char *format = nullptr) const
+{
+ gdb_byte dec[16];
+
+ match_endianness (addr, type, dec);
+
+ if (format != nullptr)
+ {
+ /* We don't handle format strings (yet). If the host printf supports
+ decimal floating point types, just use this. Otherwise, fall back
+ to printing the number while ignoring the format string. */
+#if defined (PRINTF_HAS_DECFLOAT)
+ /* FIXME: This makes unwarranted assumptions about the host ABI! */
+ return string_printf (format, dec);
+#endif
+ }
+
+ std::string result;
+ result.resize (MAX_DECIMAL_STRING);
+
+ switch (TYPE_LENGTH (type))
+ {
+ case 4:
+ decimal32ToString ((decimal32 *) dec, &result[0]);
+ break;
+ case 8:
+ decimal64ToString ((decimal64 *) dec, &result[0]);
+ break;
+ case 16:
+ decimal128ToString ((decimal128 *) dec, &result[0]);
+ break;
+ default:
+ error (_("Unknown decimal floating point type."));
+ break;
+ }
+
+ return result;
+}
+
+/* Convert the string form of a decimal value to its decimal representation.
+ LEN is the length of the decimal type, 4 bytes for decimal32, 8 bytes for
+ decimal64 and 16 bytes for decimal128. */
+bool
+decimal_float_ops::from_string (gdb_byte *addr, const struct type *type,
+ const std::string &string) const
+{
+ decContext set;
+ gdb_byte dec[16];
+
+ set_decnumber_context (&set, type);
+
+ switch (TYPE_LENGTH (type))
+ {
+ case 4:
+ decimal32FromString ((decimal32 *) dec, string.c_str (), &set);
+ break;
+ case 8:
+ decimal64FromString ((decimal64 *) dec, string.c_str (), &set);
+ break;
+ case 16:
+ decimal128FromString ((decimal128 *) dec, string.c_str (), &set);
+ break;
+ default:
+ error (_("Unknown decimal floating point type."));
+ break;
+ }
+
+ match_endianness (dec, type, addr);
+
+ /* Check for errors in the DFP operation. */
+ decimal_check_errors (&set);
+
+ return true;
+}
+
+/* Converts a LONGEST to a decimal float of specified LEN bytes. */
+void
+decimal_float_ops::from_longest (gdb_byte *addr, const struct type *type,
+ LONGEST from) const
+{
+ decNumber number;
+
+ if ((int32_t) from != from)
+ /* libdecnumber can convert only 32-bit integers. */
+ error (_("Conversion of large integer to a "
+ "decimal floating type is not supported."));
+
+ decNumberFromInt32 (&number, (int32_t) from);
+
+ decimal_from_number (&number, addr, type);
+}
+
+/* Converts a ULONGEST to a decimal float of specified LEN bytes. */
+void
+decimal_float_ops::from_ulongest (gdb_byte *addr, const struct type *type,
+ ULONGEST from) const
+{
+ decNumber number;
+
+ if ((uint32_t) from != from)
+ /* libdecnumber can convert only 32-bit integers. */
+ error (_("Conversion of large integer to a "
+ "decimal floating type is not supported."));
+
+ decNumberFromUInt32 (&number, (uint32_t) from);
+
+ decimal_from_number (&number, addr, type);
+}
+
+/* Converts a decimal float of LEN bytes to a LONGEST. */
+LONGEST
+decimal_float_ops::to_longest (const gdb_byte *addr,
+ const struct type *type) const
+{
+ /* libdecnumber has a function to convert from decimal to integer, but
+ it doesn't work when the decimal number has a fractional part. */
+ std::string str = to_string (addr, type);
+ return strtoll (str.c_str (), NULL, 10);
+}
+
+/* Perform operation OP with operands X and Y with sizes LEN_X and LEN_Y
+ and byte orders BYTE_ORDER_X and BYTE_ORDER_Y, and store value in
+ RESULT with size LEN_RESULT and byte order BYTE_ORDER_RESULT. */
+void
+decimal_float_ops::binop (enum exp_opcode op,
+ const gdb_byte *x, const struct type *type_x,
+ const gdb_byte *y, const struct type *type_y,
+ gdb_byte *res, const struct type *type_res) const
+{
+ decContext set;
+ decNumber number1, number2, number3;
+
+ decimal_to_number (x, type_x, &number1);
+ decimal_to_number (y, type_y, &number2);
+
+ set_decnumber_context (&set, type_res);
+
+ switch (op)
+ {
+ case BINOP_ADD:
+ decNumberAdd (&number3, &number1, &number2, &set);
+ break;
+ case BINOP_SUB:
+ decNumberSubtract (&number3, &number1, &number2, &set);
+ break;
+ case BINOP_MUL:
+ decNumberMultiply (&number3, &number1, &number2, &set);
+ break;
+ case BINOP_DIV:
+ decNumberDivide (&number3, &number1, &number2, &set);
+ break;
+ case BINOP_EXP:
+ decNumberPower (&number3, &number1, &number2, &set);
+ break;
+ default:
+ error (_("Operation not valid for decimal floating point number."));
+ break;
+ }
+
+ /* Check for errors in the DFP operation. */
+ decimal_check_errors (&set);
+
+ decimal_from_number (&number3, res, type_res);
+}
+
+/* Compares two numbers numerically. If X is less than Y then the return value
+ will be -1. If they are equal, then the return value will be 0. If X is
+ greater than the Y then the return value will be 1. */
+int
+decimal_float_ops::compare (const gdb_byte *x, const struct type *type_x,
+ const gdb_byte *y, const struct type *type_y) const
+{
+ decNumber number1, number2, result;
+ decContext set;
+ const struct type *type_result;
+
+ decimal_to_number (x, type_x, &number1);
+ decimal_to_number (y, type_y, &number2);
+
+ /* Perform the comparison in the larger of the two sizes. */
+ type_result = TYPE_LENGTH (type_x) > TYPE_LENGTH (type_y) ? type_x : type_y;
+ set_decnumber_context (&set, type_result);
+
+ decNumberCompare (&result, &number1, &number2, &set);
+
+ /* Check for errors in the DFP operation. */
+ decimal_check_errors (&set);
+
+ if (decNumberIsNaN (&result))
+ error (_("Comparison with an invalid number (NaN)."));
+ else if (decNumberIsZero (&result))
+ return 0;
+ else if (decNumberIsNegative (&result))
+ return -1;
+ else
+ return 1;
+}
+
+/* Convert a decimal value from a decimal type with LEN_FROM bytes to a
+ decimal type with LEN_TO bytes. */
+void
+decimal_float_ops::convert (const gdb_byte *from, const struct type *from_type,
+ gdb_byte *to, const struct type *to_type) const
+{
+ decNumber number;
+
+ decimal_to_number (from, from_type, &number);
+ decimal_from_number (&number, to, to_type);
+}
/* Typed floating-point routines. These routines operate on floating-point
"struct type", which may be either a binary or decimal floating-point
type (TYPE_CODE_FLT or TYPE_CODE_DECFLOAT). */
+/* Return whether TYPE1 and TYPE2 are of the same category (binary or
+ decimal floating-point). */
+static bool
+target_float_same_category_p (const struct type *type1,
+ const struct type *type2)
+{
+ return TYPE_CODE (type1) == TYPE_CODE (type2);
+}
+
+/* Return whether TYPE1 and TYPE2 use the same floating-point format. */
+static bool
+target_float_same_format_p (const struct type *type1,
+ const struct type *type2)
+{
+ if (!target_float_same_category_p (type1, type2))
+ return false;
+
+ switch (TYPE_CODE (type1))
+ {
+ case TYPE_CODE_FLT:
+ return floatformat_from_type (type1) == floatformat_from_type (type2);
+
+ case TYPE_CODE_DECFLOAT:
+ return (TYPE_LENGTH (type1) == TYPE_LENGTH (type2)
+ && (type_byte_order (type1)
+ == type_byte_order (type2)));
+
+ default:
+ gdb_assert_not_reached ("unexpected type code");
+ }
+}
+
+/* Return the size (without padding) of the target floating-point
+ format used by TYPE. */
+static int
+target_float_format_length (const struct type *type)
+{
+ switch (TYPE_CODE (type))
+ {
+ case TYPE_CODE_FLT:
+ return floatformat_totalsize_bytes (floatformat_from_type (type));
+
+ case TYPE_CODE_DECFLOAT:
+ return TYPE_LENGTH (type);
+
+ default:
+ gdb_assert_not_reached ("unexpected type code");
+ }
+}
+
+/* Identifiers of available host-side intermediate formats. These must
+ be sorted so the that the more "general" kinds come later. */
+enum target_float_ops_kind
+{
+ /* Target binary floating-point formats that match a host format. */
+ host_float = 0,
+ host_double,
+ host_long_double,
+ /* Any other target binary floating-point format. */
+ binary,
+ /* Any target decimal floating-point format. */
+ decimal
+};
+
+/* Given a target type TYPE, choose the best host-side intermediate format
+ to perform operations on TYPE in. */
+static enum target_float_ops_kind
+get_target_float_ops_kind (const struct type *type)
+{
+ switch (TYPE_CODE (type))
+ {
+ case TYPE_CODE_FLT:
+ {
+ const struct floatformat *fmt = floatformat_from_type (type);
+
+ /* Binary floating-point formats matching a host format. */
+ if (fmt == host_float_format)
+ return target_float_ops_kind::host_float;
+ if (fmt == host_double_format)
+ return target_float_ops_kind::host_double;
+ if (fmt == host_long_double_format)
+ return target_float_ops_kind::host_long_double;
+
+ /* Any other binary floating-point format. */
+ return target_float_ops_kind::binary;
+ }
+
+ case TYPE_CODE_DECFLOAT:
+ {
+ /* Any decimal floating-point format. */
+ return target_float_ops_kind::decimal;
+ }
+
+ default:
+ gdb_assert_not_reached ("unexpected type code");
+ }
+}
+
+/* Return target_float_ops to peform operations for KIND. */
+static const target_float_ops *
+get_target_float_ops (enum target_float_ops_kind kind)
+{
+ switch (kind)
+ {
+ /* If the type format matches one of the host floating-point
+ types, use that type as intermediate format. */
+ case target_float_ops_kind::host_float:
+ {
+ static host_float_ops<float> host_float_ops_float;
+ return &host_float_ops_float;
+ }
+
+ case target_float_ops_kind::host_double:
+ {
+ static host_float_ops<double> host_float_ops_double;
+ return &host_float_ops_double;
+ }
+
+ case target_float_ops_kind::host_long_double:
+ {
+ static host_float_ops<long double> host_float_ops_long_double;
+ return &host_float_ops_long_double;
+ }
+
+ /* For binary floating-point formats that do not match any host format,
+ use mpfr_t as intermediate format to provide precise target-floating
+ point emulation. However, if the MPFR library is not available,
+ use the largest host floating-point type as intermediate format. */
+ case target_float_ops_kind::binary:
+ {
+#ifdef HAVE_LIBMPFR
+ static mpfr_float_ops binary_float_ops;
+#else
+ static host_float_ops<long double> binary_float_ops;
+#endif
+ return &binary_float_ops;
+ }
+
+ /* For decimal floating-point types, always use the libdecnumber
+ decNumber type as intermediate format. */
+ case target_float_ops_kind::decimal:
+ {
+ static decimal_float_ops decimal_float_ops;
+ return &decimal_float_ops;
+ }
+
+ default:
+ gdb_assert_not_reached ("unexpected target_float_ops_kind");
+ }
+}
+
+/* Given a target type TYPE, determine the best host-side intermediate format
+ to perform operations on TYPE in. */
+static const target_float_ops *
+get_target_float_ops (const struct type *type)
+{
+ enum target_float_ops_kind kind = get_target_float_ops_kind (type);
+ return get_target_float_ops (kind);
+}
+
+/* The same for operations involving two target types TYPE1 and TYPE2. */
+static const target_float_ops *
+get_target_float_ops (const struct type *type1, const struct type *type2)
+{
+ gdb_assert (TYPE_CODE (type1) == TYPE_CODE (type2));
+
+ enum target_float_ops_kind kind1 = get_target_float_ops_kind (type1);
+ enum target_float_ops_kind kind2 = get_target_float_ops_kind (type2);
+
+ /* Given the way the kinds are sorted, we simply choose the larger one;
+ this will be able to hold values of either type. */
+ return get_target_float_ops (std::max (kind1, kind2));
+}
+
/* Return whether the byte-stream ADDR holds a valid value of
floating-point type TYPE. */
bool
== float_zero);
if (TYPE_CODE (type) == TYPE_CODE_DECFLOAT)
- return decimal_is_zero (addr, TYPE_LENGTH (type),
- gdbarch_byte_order (get_type_arch (type)));
+ return decimal_is_zero (addr, type);
gdb_assert_not_reached ("unexpected type code");
}
+/* Convert the byte-stream ADDR, interpreted as floating-point type TYPE,
+ to a string, optionally using the print format FORMAT. */
+std::string
+target_float_to_string (const gdb_byte *addr, const struct type *type,
+ const char *format)
+{
+ /* Unless we need to adhere to a specific format, provide special
+ output for special cases of binary floating-point numbers. */
+ if (format == nullptr && TYPE_CODE (type) == TYPE_CODE_FLT)
+ {
+ const struct floatformat *fmt = floatformat_from_type (type);
+
+ /* Detect invalid representations. */
+ if (!floatformat_is_valid (fmt, addr))
+ return "<invalid float value>";
+
+ /* Handle NaN and Inf. */
+ enum float_kind kind = floatformat_classify (fmt, addr);
+ if (kind == float_nan)
+ {
+ const char *sign = floatformat_is_negative (fmt, addr)? "-" : "";
+ const char *mantissa = floatformat_mantissa (fmt, addr);
+ return string_printf ("%snan(0x%s)", sign, mantissa);
+ }
+ else if (kind == float_infinite)
+ {
+ const char *sign = floatformat_is_negative (fmt, addr)? "-" : "";
+ return string_printf ("%sinf", sign);
+ }
+ }
+
+ const target_float_ops *ops = get_target_float_ops (type);
+ return ops->to_string (addr, type, format);
+}
+
+/* Parse string STRING into a target floating-number of type TYPE and
+ store it as byte-stream ADDR. Return whether parsing succeeded. */
+bool
+target_float_from_string (gdb_byte *addr, const struct type *type,
+ const std::string &string)
+{
+ const target_float_ops *ops = get_target_float_ops (type);
+ return ops->from_string (addr, type, string);
+}
+
+/* Convert the byte-stream ADDR, interpreted as floating-point type TYPE,
+ to an integer value (rounding towards zero). */
+LONGEST
+target_float_to_longest (const gdb_byte *addr, const struct type *type)
+{
+ const target_float_ops *ops = get_target_float_ops (type);
+ return ops->to_longest (addr, type);
+}
+
+/* Convert signed integer VAL to a target floating-number of type TYPE
+ and store it as byte-stream ADDR. */
+void
+target_float_from_longest (gdb_byte *addr, const struct type *type,
+ LONGEST val)
+{
+ const target_float_ops *ops = get_target_float_ops (type);
+ ops->from_longest (addr, type, val);
+}
+
+/* Convert unsigned integer VAL to a target floating-number of type TYPE
+ and store it as byte-stream ADDR. */
+void
+target_float_from_ulongest (gdb_byte *addr, const struct type *type,
+ ULONGEST val)
+{
+ const target_float_ops *ops = get_target_float_ops (type);
+ ops->from_ulongest (addr, type, val);
+}
+
+/* Convert the byte-stream ADDR, interpreted as floating-point type TYPE,
+ to a floating-point value in the host "double" format. */
+double
+target_float_to_host_double (const gdb_byte *addr,
+ const struct type *type)
+{
+ const target_float_ops *ops = get_target_float_ops (type);
+ return ops->to_host_double (addr, type);
+}
+
+/* Convert floating-point value VAL in the host "double" format to a target
+ floating-number of type TYPE and store it as byte-stream ADDR. */
+void
+target_float_from_host_double (gdb_byte *addr, const struct type *type,
+ double val)
+{
+ const target_float_ops *ops = get_target_float_ops (type);
+ ops->from_host_double (addr, type, val);
+}
+
+/* Convert a floating-point number of type FROM_TYPE from the target
+ byte-stream FROM to a floating-point number of type TO_TYPE, and
+ store it to the target byte-stream TO. */
+void
+target_float_convert (const gdb_byte *from, const struct type *from_type,
+ gdb_byte *to, const struct type *to_type)
+{
+ /* We cannot directly convert between binary and decimal floating-point
+ types, so go via an intermediary string. */
+ if (!target_float_same_category_p (from_type, to_type))
+ {
+ std::string str = target_float_to_string (from, from_type);
+ target_float_from_string (to, to_type, str);
+ return;
+ }
+
+ /* Convert between two different formats in the same category. */
+ if (!target_float_same_format_p (from_type, to_type))
+ {
+ const target_float_ops *ops = get_target_float_ops (from_type, to_type);
+ ops->convert (from, from_type, to, to_type);
+ return;
+ }
+
+ /* The floating-point formats match, so we simply copy the data, ensuring
+ possible padding bytes in the target buffer are zeroed out. */
+ memset (to, 0, TYPE_LENGTH (to_type));
+ memcpy (to, from, target_float_format_length (to_type));
+}
+
+/* Perform the binary operation indicated by OPCODE, using as operands the
+ target byte streams X and Y, interpreted as floating-point numbers of
+ types TYPE_X and TYPE_Y, respectively. Convert the result to type
+ TYPE_RES and store it into the byte-stream RES.
+
+ The three types must either be all binary floating-point types, or else
+ all decimal floating-point types. Binary and decimal floating-point
+ types cannot be mixed within a single operation. */
+void
+target_float_binop (enum exp_opcode opcode,
+ const gdb_byte *x, const struct type *type_x,
+ const gdb_byte *y, const struct type *type_y,
+ gdb_byte *res, const struct type *type_res)
+{
+ gdb_assert (target_float_same_category_p (type_x, type_res));
+ gdb_assert (target_float_same_category_p (type_y, type_res));
+
+ const target_float_ops *ops = get_target_float_ops (type_x, type_y);
+ ops->binop (opcode, x, type_x, y, type_y, res, type_res);
+}
+
+/* Compare the two target byte streams X and Y, interpreted as floating-point
+ numbers of types TYPE_X and TYPE_Y, respectively. Return zero if X and Y
+ are equal, -1 if X is less than Y, and 1 otherwise.
+
+ The two types must either both be binary floating-point types, or else
+ both be decimal floating-point types. Binary and decimal floating-point
+ types cannot compared directly against each other. */
+int
+target_float_compare (const gdb_byte *x, const struct type *type_x,
+ const gdb_byte *y, const struct type *type_y)
+{
+ gdb_assert (target_float_same_category_p (type_x, type_y));
+
+ const target_float_ops *ops = get_target_float_ops (type_x, type_y);
+ return ops->compare (x, type_x, y, type_y);
+}
+