}
const char *
-target_xfer_error_to_string (enum target_xfer_error err)
+target_xfer_status_to_string (enum target_xfer_status err)
{
#define CASE(X) case X: return #X
switch (err)
/* Read memory from the live target, even if currently inspecting a
traceframe. The return is the same as that of target_read. */
-static LONGEST
+static enum target_xfer_status
target_read_live_memory (enum target_object object,
- ULONGEST memaddr, gdb_byte *myaddr, ULONGEST len)
+ ULONGEST memaddr, gdb_byte *myaddr, ULONGEST len,
+ ULONGEST *xfered_len)
{
- LONGEST ret;
+ enum target_xfer_status ret;
struct cleanup *cleanup;
/* Switch momentarily out of tfind mode so to access live memory.
cleanup = make_cleanup_restore_traceframe_number ();
set_traceframe_number (-1);
- ret = target_read (current_target.beneath, object, NULL,
- myaddr, memaddr, len);
+ ret = target_xfer_partial (current_target.beneath, object, NULL,
+ myaddr, NULL, memaddr, len, xfered_len);
do_cleanups (cleanup);
return ret;
For interface/parameters/return description see target.h,
to_xfer_partial. */
-static LONGEST
+static enum target_xfer_status
memory_xfer_live_readonly_partial (struct target_ops *ops,
enum target_object object,
gdb_byte *readbuf, ULONGEST memaddr,
- ULONGEST len)
+ ULONGEST len, ULONGEST *xfered_len)
{
struct target_section *secp;
struct target_section_table *table;
{
/* Entire transfer is within this section. */
return target_read_live_memory (object, memaddr,
- readbuf, len);
+ readbuf, len, xfered_len);
}
else if (memaddr >= p->endaddr)
{
/* This section overlaps the transfer. Just do half. */
len = p->endaddr - memaddr;
return target_read_live_memory (object, memaddr,
- readbuf, len);
+ readbuf, len, xfered_len);
}
}
}
}
- return 0;
+ return TARGET_XFER_EOF;
}
/* Read memory from more than one valid target. A core file, for
instance, could have some of memory but delegate other bits to
the target below it. So, we must manually try all targets. */
-static LONGEST
+static enum target_xfer_status
raw_memory_xfer_partial (struct target_ops *ops, gdb_byte *readbuf,
- const gdb_byte *writebuf, ULONGEST memaddr, LONGEST len)
+ const gdb_byte *writebuf, ULONGEST memaddr, LONGEST len,
+ ULONGEST *xfered_len)
{
- LONGEST res;
+ enum target_xfer_status res;
do
{
res = ops->to_xfer_partial (ops, TARGET_OBJECT_MEMORY, NULL,
- readbuf, writebuf, memaddr, len);
- if (res > 0)
+ readbuf, writebuf, memaddr, len,
+ xfered_len);
+ if (res == TARGET_XFER_OK)
break;
/* Stop if the target reports that the memory is not available. */
/* Perform a partial memory transfer.
For docs see target.h, to_xfer_partial. */
-static LONGEST
+static enum target_xfer_status
memory_xfer_partial_1 (struct target_ops *ops, enum target_object object,
gdb_byte *readbuf, const gdb_byte *writebuf, ULONGEST memaddr,
- ULONGEST len)
+ ULONGEST len, ULONGEST *xfered_len)
{
- LONGEST res;
+ enum target_xfer_status res;
int reg_len;
struct mem_region *region;
struct inferior *inf;
memaddr = overlay_mapped_address (memaddr, section);
return section_table_xfer_memory_partial (readbuf, writebuf,
- memaddr, len,
+ memaddr, len, xfered_len,
table->sections,
table->sections_end,
section_name);
{
table = target_get_section_table (ops);
return section_table_xfer_memory_partial (readbuf, writebuf,
- memaddr, len,
+ memaddr, len, xfered_len,
table->sections,
table->sections_end,
NULL);
/* This goes through the topmost target again. */
res = memory_xfer_live_readonly_partial (ops, object,
- readbuf, memaddr, len);
- if (res > 0)
- return res;
-
- /* No use trying further, we know some memory starting
- at MEMADDR isn't available. */
- return TARGET_XFER_E_UNAVAILABLE;
+ readbuf, memaddr,
+ len, xfered_len);
+ if (res == TARGET_XFER_OK)
+ return TARGET_XFER_OK;
+ else
+ {
+ /* No use trying further, we know some memory starting
+ at MEMADDR isn't available. */
+ *xfered_len = len;
+ return TARGET_XFER_E_UNAVAILABLE;
+ }
}
/* Don't try to read more than how much is available, in
|| (code_cache_enabled_p () && object == TARGET_OBJECT_CODE_MEMORY)))
{
DCACHE *dcache = target_dcache_get_or_init ();
+ int l;
if (readbuf != NULL)
- res = dcache_xfer_memory (ops, dcache, memaddr, readbuf, reg_len, 0);
+ l = dcache_xfer_memory (ops, dcache, memaddr, readbuf, reg_len, 0);
else
/* FIXME drow/2006-08-09: If we're going to preserve const
correctness dcache_xfer_memory should take readbuf and
writebuf. */
- res = dcache_xfer_memory (ops, dcache, memaddr, (void *) writebuf,
+ l = dcache_xfer_memory (ops, dcache, memaddr, (void *) writebuf,
reg_len, 1);
- if (res <= 0)
- return -1;
+ if (l <= 0)
+ return TARGET_XFER_E_IO;
else
- return res;
+ {
+ *xfered_len = (ULONGEST) l;
+ return TARGET_XFER_OK;
+ }
}
/* If none of those methods found the memory we wanted, fall back
to_xfer_partial is enough; if it doesn't recognize an object
it will call the to_xfer_partial of the next target down.
But for memory this won't do. Memory is the only target
- object which can be read from more than one valid target. */
- res = raw_memory_xfer_partial (ops, readbuf, writebuf, memaddr, reg_len);
+ object which can be read from more than one valid target.
+ A core file, for instance, could have some of memory but
+ delegate other bits to the target below it. So, we must
+ manually try all targets. */
+
+ res = raw_memory_xfer_partial (ops, readbuf, writebuf, memaddr, reg_len,
+ xfered_len);
/* Make sure the cache gets updated no matter what - if we are writing
to the stack. Even if this write is not tagged as such, we still need
to update the cache. */
- if (res > 0
+ if (res == TARGET_XFER_OK
&& inf != NULL
&& writebuf != NULL
&& target_dcache_init_p ()
{
DCACHE *dcache = target_dcache_get ();
- dcache_update (dcache, memaddr, (void *) writebuf, res);
+ dcache_update (dcache, memaddr, (void *) writebuf, reg_len);
}
/* If we still haven't got anything, return the last error. We
/* Perform a partial memory transfer. For docs see target.h,
to_xfer_partial. */
-static LONGEST
+static enum target_xfer_status
memory_xfer_partial (struct target_ops *ops, enum target_object object,
- gdb_byte *readbuf, const gdb_byte *writebuf, ULONGEST memaddr,
- ULONGEST len)
+ gdb_byte *readbuf, const gdb_byte *writebuf,
+ ULONGEST memaddr, ULONGEST len, ULONGEST *xfered_len)
{
- int res;
+ enum target_xfer_status res;
/* Zero length requests are ok and require no work. */
if (len == 0)
- return 0;
+ return TARGET_XFER_EOF;
/* Fill in READBUF with breakpoint shadows, or WRITEBUF with
breakpoint insns, thus hiding out from higher layers whether
there are software breakpoints inserted in the code stream. */
if (readbuf != NULL)
{
- res = memory_xfer_partial_1 (ops, object, readbuf, NULL, memaddr, len);
+ res = memory_xfer_partial_1 (ops, object, readbuf, NULL, memaddr, len,
+ xfered_len);
- if (res > 0 && !show_memory_breakpoints)
+ if (res == TARGET_XFER_OK && !show_memory_breakpoints)
breakpoint_xfer_memory (readbuf, NULL, NULL, memaddr, res);
}
else
memcpy (buf, writebuf, len);
breakpoint_xfer_memory (NULL, buf, writebuf, memaddr, len);
- res = memory_xfer_partial_1 (ops, object, NULL, buf, memaddr, len);
+ res = memory_xfer_partial_1 (ops, object, NULL, buf, memaddr, len,
+ xfered_len);
do_cleanups (old_chain);
}
/* For docs see target.h, to_xfer_partial. */
-LONGEST
+enum target_xfer_status
target_xfer_partial (struct target_ops *ops,
enum target_object object, const char *annex,
gdb_byte *readbuf, const gdb_byte *writebuf,
- ULONGEST offset, ULONGEST len)
+ ULONGEST offset, ULONGEST len,
+ ULONGEST *xfered_len)
{
- LONGEST retval;
+ enum target_xfer_status retval;
gdb_assert (ops->to_xfer_partial != NULL);
/* Transfer is done when LEN is zero. */
if (len == 0)
- return 0;
+ return TARGET_XFER_EOF;
if (writebuf && !may_write_memory)
error (_("Writing to memory is not allowed (addr %s, len %s)"),
core_addr_to_string_nz (offset), plongest (len));
+ *xfered_len = 0;
+
/* If this is a memory transfer, let the memory-specific code
have a look at it instead. Memory transfers are more
complicated. */
if (object == TARGET_OBJECT_MEMORY || object == TARGET_OBJECT_STACK_MEMORY
|| object == TARGET_OBJECT_CODE_MEMORY)
retval = memory_xfer_partial (ops, object, readbuf,
- writebuf, offset, len);
+ writebuf, offset, len, xfered_len);
else if (object == TARGET_OBJECT_RAW_MEMORY)
{
/* Request the normal memory object from other layers. */
- retval = raw_memory_xfer_partial (ops, readbuf, writebuf, offset, len);
+ retval = raw_memory_xfer_partial (ops, readbuf, writebuf, offset, len,
+ xfered_len);
}
else
retval = ops->to_xfer_partial (ops, object, annex, readbuf,
- writebuf, offset, len);
+ writebuf, offset, len, xfered_len);
if (targetdebug)
{
fprintf_unfiltered (gdb_stdlog,
"%s:target_xfer_partial "
- "(%d, %s, %s, %s, %s, %s) = %s",
+ "(%d, %s, %s, %s, %s, %s) = %d, %s",
ops->to_shortname,
(int) object,
(annex ? annex : "(null)"),
host_address_to_string (readbuf),
host_address_to_string (writebuf),
core_addr_to_string_nz (offset),
- pulongest (len), plongest (retval));
+ pulongest (len), retval,
+ pulongest (*xfered_len));
if (readbuf)
myaddr = readbuf;
if (writebuf)
myaddr = writebuf;
- if (retval > 0 && myaddr != NULL)
+ if (retval == TARGET_XFER_OK && myaddr != NULL)
{
int i;
fputs_unfiltered (", bytes =", gdb_stdlog);
- for (i = 0; i < retval; i++)
+ for (i = 0; i < *xfered_len; i++)
{
if ((((intptr_t) &(myaddr[i])) & 0xf) == 0)
{
fputc_unfiltered ('\n', gdb_stdlog);
}
+
+ /* Check implementations of to_xfer_partial update *XFERED_LEN
+ properly. Do assertion after printing debug messages, so that we
+ can find more clues on assertion failure from debugging messages. */
+ if (retval == TARGET_XFER_OK || retval == TARGET_XFER_E_UNAVAILABLE)
+ gdb_assert (*xfered_len > 0);
+
return retval;
}
/* Read LEN bytes of target memory at address MEMADDR, placing the
results in GDB's memory at MYADDR. Returns either 0 for success or
- a target_xfer_error value if any error occurs.
+ TARGET_XFER_E_IO if any error occurs.
If an error occurs, no guarantee is made about the contents of the data at
MYADDR. In particular, the caller should not depend upon partial reads
}
/* Write LEN bytes from MYADDR to target memory at address MEMADDR.
- Returns either 0 for success or a target_xfer_error value if any
+ Returns either 0 for success or TARGET_XFER_E_IO if any
error occurs. If an error occurs, no guarantee is made about how
much data got written. Callers that can deal with partial writes
should call target_write. */
}
/* Write LEN bytes from MYADDR to target raw memory at address
- MEMADDR. Returns either 0 for success or a target_xfer_error value
+ MEMADDR. Returns either 0 for success or TARGET_XFER_E_IO
if any error occurs. If an error occurs, no guarantee is made
about how much data got written. Callers that can deal with
partial writes should call target_write. */
/* More generic transfers. */
-static LONGEST
+static enum target_xfer_status
default_xfer_partial (struct target_ops *ops, enum target_object object,
const char *annex, gdb_byte *readbuf,
- const gdb_byte *writebuf, ULONGEST offset, ULONGEST len)
+ const gdb_byte *writebuf, ULONGEST offset, ULONGEST len,
+ ULONGEST *xfered_len)
{
if (object == TARGET_OBJECT_MEMORY
&& ops->deprecated_xfer_memory != NULL)
xfered = ops->deprecated_xfer_memory (offset, readbuf, len,
0/*read*/, NULL, ops);
if (xfered > 0)
- return xfered;
+ {
+ *xfered_len = (ULONGEST) xfered;
+ return TARGET_XFER_E_IO;
+ }
else if (xfered == 0 && errno == 0)
/* "deprecated_xfer_memory" uses 0, cross checked against
ERRNO as one indication of an error. */
- return 0;
+ return TARGET_XFER_EOF;
else
- return -1;
+ return TARGET_XFER_E_IO;
}
else if (ops->beneath != NULL)
return ops->beneath->to_xfer_partial (ops->beneath, object, annex,
- readbuf, writebuf, offset, len);
+ readbuf, writebuf, offset, len,
+ xfered_len);
else
- return -1;
+ return TARGET_XFER_E_IO;
}
/* The xfer_partial handler for the topmost target. Unlike the default,
it does not need to handle memory specially; it just passes all
requests down the stack. */
-static LONGEST
+static enum target_xfer_status
current_xfer_partial (struct target_ops *ops, enum target_object object,
const char *annex, gdb_byte *readbuf,
- const gdb_byte *writebuf, ULONGEST offset, ULONGEST len)
+ const gdb_byte *writebuf, ULONGEST offset, ULONGEST len,
+ ULONGEST *xfered_len)
{
if (ops->beneath != NULL)
return ops->beneath->to_xfer_partial (ops->beneath, object, annex,
- readbuf, writebuf, offset, len);
+ readbuf, writebuf, offset, len,
+ xfered_len);
else
- return -1;
+ return TARGET_XFER_E_IO;
}
/* Target vector read/write partial wrapper functions. */
-static LONGEST
+static enum target_xfer_status
target_read_partial (struct target_ops *ops,
enum target_object object,
const char *annex, gdb_byte *buf,
- ULONGEST offset, LONGEST len)
+ ULONGEST offset, ULONGEST len,
+ ULONGEST *xfered_len)
{
- return target_xfer_partial (ops, object, annex, buf, NULL, offset, len);
+ return target_xfer_partial (ops, object, annex, buf, NULL, offset, len,
+ xfered_len);
}
static LONGEST
target_write_partial (struct target_ops *ops,
enum target_object object,
const char *annex, const gdb_byte *buf,
- ULONGEST offset, LONGEST len)
+ ULONGEST offset, LONGEST len, ULONGEST *xfered_len)
{
- return target_xfer_partial (ops, object, annex, NULL, buf, offset, len);
+ return target_xfer_partial (ops, object, annex, NULL, buf, offset, len,
+ xfered_len);
}
/* Wrappers to perform the full transfer. */
while (xfered < len)
{
- LONGEST xfer = target_read_partial (ops, object, annex,
- (gdb_byte *) buf + xfered,
- offset + xfered, len - xfered);
+ ULONGEST xfered_len;
+ enum target_xfer_status status;
+
+ status = target_read_partial (ops, object, annex,
+ (gdb_byte *) buf + xfered,
+ offset + xfered, len - xfered,
+ &xfered_len);
/* Call an observer, notifying them of the xfer progress? */
- if (xfer == 0)
+ if (status == TARGET_XFER_EOF)
return xfered;
- if (xfer < 0)
+ else if (status == TARGET_XFER_OK)
+ {
+ xfered += xfered_len;
+ QUIT;
+ }
+ else
return -1;
- xfered += xfer;
- QUIT;
+
}
return len;
}
ULONGEST current_end = end;
int forward;
memory_read_result_s r;
+ ULONGEST xfered_len;
/* If we previously failed to read 1 byte, nothing can be done here. */
if (end - begin <= 1)
if not. This heuristic is meant to permit reading accessible memory
at the boundary of accessible region. */
if (target_read_partial (ops, TARGET_OBJECT_MEMORY, NULL,
- buf, begin, 1) == 1)
+ buf, begin, 1, &xfered_len) == TARGET_XFER_OK)
{
forward = 1;
++current_begin;
}
else if (target_read_partial (ops, TARGET_OBJECT_MEMORY, NULL,
- buf + (end-begin) - 1, end - 1, 1) == 1)
+ buf + (end-begin) - 1, end - 1, 1,
+ &xfered_len) == TARGET_XFER_OK)
{
forward = 0;
--current_end;
while (xfered < len)
{
- LONGEST xfer = target_write_partial (ops, object, annex,
- (gdb_byte *) buf + xfered,
- offset + xfered, len - xfered);
+ ULONGEST xfered_len;
+ enum target_xfer_status status;
+
+ status = target_write_partial (ops, object, annex,
+ (gdb_byte *) buf + xfered,
+ offset + xfered, len - xfered,
+ &xfered_len);
- if (xfer == 0)
+ if (status == TARGET_XFER_EOF)
return xfered;
- if (xfer < 0)
+ if (TARGET_XFER_STATUS_ERROR_P (status))
return -1;
+ gdb_assert (status == TARGET_XFER_OK);
if (progress)
- (*progress) (xfer, baton);
+ (*progress) (xfered_len, baton);
- xfered += xfer;
+ xfered += xfered_len;
QUIT;
}
return len;
{
size_t buf_alloc, buf_pos;
gdb_byte *buf;
- LONGEST n;
/* This function does not have a length parameter; it reads the
entire OBJECT). Also, it doesn't support objects fetched partly
buf_pos = 0;
while (1)
{
- n = target_read_partial (ops, object, annex, &buf[buf_pos],
- buf_pos, buf_alloc - buf_pos - padding);
- if (n < 0)
- {
- /* An error occurred. */
- xfree (buf);
- return -1;
- }
- else if (n == 0)
+ ULONGEST xfered_len;
+ enum target_xfer_status status;
+
+ status = target_read_partial (ops, object, annex, &buf[buf_pos],
+ buf_pos, buf_alloc - buf_pos - padding,
+ &xfered_len);
+
+ if (status == TARGET_XFER_EOF)
{
/* Read all there was. */
if (buf_pos == 0)
*buf_p = buf;
return buf_pos;
}
+ else if (status != TARGET_XFER_OK)
+ {
+ /* An error occurred. */
+ xfree (buf);
+ return TARGET_XFER_E_IO;
+ }
- buf_pos += n;
+ buf_pos += xfered_len;
/* If the buffer is filling up, expand it. */
if (buf_alloc < buf_pos * 2)