/* Interface between GDB and target environments, including files and processes
- Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
- 2000, 2001, 2002 Free Software Foundation, Inc.
+
+ Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
+ 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+
Contributed by Cygnus Support. Written by John Gilmore.
This file is part of GDB.
struct objfile;
struct ui_file;
struct mem_attrib;
+struct target_ops;
/* This include file defines the interface between the main part
of the debugger, and the part which is target-specific, or
/* Given a name (SIGHUP, etc.), return its signal. */
enum target_signal target_signal_from_name (char *);
\f
+/* Request the transfer of up to LEN 8-bit bytes of the target's
+ OBJECT. The OFFSET, for a seekable object, specifies the starting
+ point. The ANNEX can be used to provide additional data-specific
+ information to the target.
+
+ Return the number of bytes actually transfered, zero when no
+ further transfer is possible, and -1 when the transfer is not
+ supported.
+
+ NOTE: cagney/2003-10-17: The current interface does not support a
+ "retry" mechanism. Instead it assumes that at least one byte will
+ be transfered on each call.
+
+ NOTE: cagney/2003-10-17: The current interface can lead to
+ fragmented transfers. Lower target levels should not implement
+ hacks, such as enlarging the transfer, in an attempt to compensate
+ for this. Instead, the target stack should be extended so that it
+ implements supply/collect methods and a look-aside object cache.
+ With that available, the lowest target can safely and freely "push"
+ data up the stack.
+
+ NOTE: cagney/2003-10-17: Unlike the old query and the memory
+ transfer mechanisms, these methods are explicitly parameterized by
+ the target that it should be applied to.
+
+ NOTE: cagney/2003-10-17: Just like the old query and memory xfer
+ methods, these new methods perform partial transfers. The only
+ difference is that these new methods thought to include "partial"
+ in the name. The old code's failure to do this lead to much
+ confusion and duplication of effort as each target object attempted
+ to locally take responsibility for something it didn't have to
+ worry about.
+
+ NOTE: cagney/2003-10-17: With a TARGET_OBJECT_KOD object, for
+ backward compatibility with the "target_query" method that this
+ replaced, when OFFSET and LEN are both zero, return the "minimum"
+ buffer size. See "remote.c" for further information. */
+
+enum target_object
+{
+ /* Kernel Object Display transfer. See "kod.c" and "remote.c". */
+ TARGET_OBJECT_KOD,
+ /* AVR target specific transfer. See "avr-tdep.c" and "remote.c". */
+ TARGET_OBJECT_AVR,
+ /* Transfer up-to LEN bytes of memory starting at OFFSET. */
+ TARGET_OBJECT_MEMORY,
+ /* Kernel Unwind Table. See "ia64-tdep.c". */
+ TARGET_OBJECT_UNWIND_TABLE,
+ /* Possible future objects: TARGET_OBJECT_FILE, TARGET_OBJECT_PROC,
+ TARGET_OBJECT_AUXV, ... */
+};
+
+extern LONGEST target_read_partial (struct target_ops *ops,
+ enum target_object object,
+ const char *annex, void *buf,
+ ULONGEST offset, LONGEST len);
+
+extern LONGEST target_write_partial (struct target_ops *ops,
+ enum target_object object,
+ const char *annex, const void *buf,
+ ULONGEST offset, LONGEST len);
+
+/* Wrappers to perform the full transfer. */
+extern LONGEST target_read (struct target_ops *ops,
+ enum target_object object,
+ const char *annex, void *buf,
+ ULONGEST offset, LONGEST len);
+
+extern LONGEST target_write (struct target_ops *ops,
+ enum target_object object,
+ const char *annex, const void *buf,
+ ULONGEST offset, LONGEST len);
+
+/* Wrappers to target read/write that perform memory transfers. They
+ throw an error if the memory transfer fails.
+
+ NOTE: cagney/2003-10-23: The naming schema is lifted from
+ "frame.h". The parameter order is lifted from get_frame_memory,
+ which in turn lifted it from read_memory. */
+
+extern void get_target_memory (struct target_ops *ops, CORE_ADDR addr,
+ void *buf, LONGEST len);
+extern ULONGEST get_target_memory_unsigned (struct target_ops *ops,
+ CORE_ADDR addr, int len);
+\f
/* If certain kinds of activity happen, target_wait should perform
callbacks. */
char *to_doc; /* Documentation. Does not include trailing
newline, and starts with a one-line descrip-
tion (probably similar to to_longname). */
+ /* Per-target scratch pad. */
+ void *to_data;
+ /* The open routine takes the rest of the parameters from the
+ command, and (if successful) pushes a new target onto the
+ stack. Targets should supply this routine, if only to provide
+ an error message. */
void (*to_open) (char *, int);
+ /* Old targets with a static target vector provide "to_close".
+ New re-entrant targets provide "to_xclose" and that is expected
+ to xfree everything (including the "struct target_ops"). */
+ void (*to_xclose) (struct target_ops *targ, int quitting);
void (*to_close) (int);
void (*to_attach) (char *, int);
void (*to_post_attach) (int);
char *(*to_pid_to_str) (ptid_t);
char *(*to_extra_thread_info) (struct thread_info *);
void (*to_stop) (void);
- int (*to_query) (int /*char */ , char *, char *, int *);
void (*to_rcmd) (char *command, struct ui_file *output);
struct symtab_and_line *(*to_enable_exception_callback) (enum
exception_event_kind,
struct objfile *objfile,
CORE_ADDR offset);
+ /* Perform partial transfers on OBJECT. See target_read_partial
+ and target_write_partial for details of each variant. One, and
+ only one, of readbuf or writebuf must be non-NULL. */
+ LONGEST (*to_xfer_partial) (struct target_ops *ops,
+ enum target_object object, const char *annex,
+ void *readbuf, const void *writebuf,
+ ULONGEST offset, LONGEST len);
+
int to_magic;
/* Need sub-structure for target machine related rather than comm related?
*/
#define target_shortname (current_target.to_shortname)
#define target_longname (current_target.to_longname)
-/* The open routine takes the rest of the parameters from the command,
- and (if successful) pushes a new target onto the stack.
- Targets should supply this routine, if only to provide an error message. */
-
-#define target_open(name, from_tty) \
- do { \
- dcache_invalidate (target_dcache); \
- (*current_target.to_open) (name, from_tty); \
- } while (0)
-
-/* Does whatever cleanup is required for a target that we are no longer
- going to be calling. Argument says whether we are quitting gdb and
- should not get hung in case of errors, or whether we want a clean
- termination even if it takes a while. This routine is automatically
- always called just before a routine is popped off the target stack.
- Closing file descriptors and freeing memory are typical things it should
- do. */
+/* Does whatever cleanup is required for a target that we are no
+ longer going to be calling. QUITTING indicates that GDB is exiting
+ and should not get hung on an error (otherwise it is important to
+ perform clean termination, even if it takes a while). This routine
+ is automatically always called when popping the target off the
+ target stack (to_beneath is undefined). Closing file descriptors
+ and freeing all memory allocated memory are typical things it
+ should do. */
-#define target_close(quitting) \
- (*current_target.to_close) (quitting)
+void target_close (struct target_ops *targ, int quitting);
/* Attaches to a process on the target side. Arguments are as passed
to the `attach' command by the user. This routine can be called
#define target_stop current_target.to_stop
-/* Queries the target side for some information. The first argument is a
- letter specifying the type of the query, which is used to determine who
- should process it. The second argument is a string that specifies which
- information is desired and the third is a buffer that carries back the
- response from the target side. The fourth parameter is the size of the
- output buffer supplied. */
-
-#define target_query(query_type, query, resp_buffer, bufffer_size) \
- (*current_target.to_query) (query_type, query, resp_buffer, bufffer_size)
-
/* Send the specified COMMAND to the target's monitor
(shell,interpreter) for execution. The result of the query is
placed in OUTBUF. */
CORE_ADDR addr; /* Lowest address in section */
CORE_ADDR endaddr; /* 1+highest address in section */
- sec_ptr the_bfd_section;
+ struct bfd_section *the_bfd_section;
bfd *bfd; /* BFD file pointer */
};
-/* Builds a section table, given args BFD, SECTABLE_PTR, SECEND_PTR.
- Returns 0 if OK, 1 on error. */
+/* Return the "section" containing the specified address. */
+struct section_table *target_section_by_addr (struct target_ops *target,
+ CORE_ADDR addr);
-extern int build_section_table (bfd *, struct section_table **,
- struct section_table **);
/* From mem-break.c */
projects / deliverable / binutils-gdb.git / blobdiff