/* Interface between GDB and target environments, including files and processes
- Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
- 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
+ Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+ 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Free Software Foundation, Inc.
Contributed by Cygnus Support. Written by John Gilmore.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor,
- Boston, MA 02110-1301, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
#if !defined (TARGET_H)
#define TARGET_H
struct mem_attrib;
struct target_ops;
struct bp_target_info;
+struct regcache;
/* This include file defines the interface between the main part
of the debugger, and the part which is target-specific, or
#include "symtab.h"
#include "dcache.h"
#include "memattr.h"
+#include "vec.h"
enum strata
{
dummy_stratum, /* The lowest of the low */
file_stratum, /* Executable files, etc */
core_stratum, /* Core dump files */
- download_stratum, /* Downloading of remote targets */
process_stratum, /* Executing processes */
thread_stratum /* Executing threads */
};
{
tc_none = 0, /* Default: can't control thread execution. */
tc_schedlock = 1, /* Can lock the thread scheduler. */
- tc_switch = 2 /* Can switch the running thread on demand. */
};
/* Stuff for target_wait. */
/* Given a name (SIGHUP, etc.), return its signal. */
enum target_signal target_signal_from_name (char *);
\f
-/* Request the transfer of up to LEN 8-bit bytes of the target's
- OBJECT. The OFFSET, for a seekable object, specifies the starting
- point. The ANNEX can be used to provide additional data-specific
- information to the target.
-
- Return the number of bytes actually transfered, zero when no
- further transfer is possible, and -1 when the transfer is not
- supported.
-
- NOTE: cagney/2003-10-17: The current interface does not support a
- "retry" mechanism. Instead it assumes that at least one byte will
- be transfered on each call.
-
- NOTE: cagney/2003-10-17: The current interface can lead to
- fragmented transfers. Lower target levels should not implement
- hacks, such as enlarging the transfer, in an attempt to compensate
- for this. Instead, the target stack should be extended so that it
- implements supply/collect methods and a look-aside object cache.
- With that available, the lowest target can safely and freely "push"
- data up the stack.
-
- NOTE: cagney/2003-10-17: Unlike the old query and the memory
- transfer mechanisms, these methods are explicitly parameterized by
- the target that it should be applied to.
-
- NOTE: cagney/2003-10-17: Just like the old query and memory xfer
- methods, these new methods perform partial transfers. The only
- difference is that these new methods thought to include "partial"
- in the name. The old code's failure to do this lead to much
- confusion and duplication of effort as each target object attempted
- to locally take responsibility for something it didn't have to
- worry about.
-
- NOTE: cagney/2003-10-17: With a TARGET_OBJECT_KOD object, for
- backward compatibility with the "target_query" method that this
- replaced, when OFFSET and LEN are both zero, return the "minimum"
- buffer size. See "remote.c" for further information. */
+/* Target objects which can be transfered using target_read,
+ target_write, et cetera. */
enum target_object
{
- /* Kernel Object Display transfer. See "kod.c" and "remote.c". */
- TARGET_OBJECT_KOD,
/* AVR target specific transfer. See "avr-tdep.c" and "remote.c". */
TARGET_OBJECT_AVR,
+ /* SPU target specific transfer. See "spu-tdep.c". */
+ TARGET_OBJECT_SPU,
/* Transfer up-to LEN bytes of memory starting at OFFSET. */
TARGET_OBJECT_MEMORY,
+ /* Memory, avoiding GDB's data cache and trusting the executable.
+ Target implementations of to_xfer_partial never need to handle
+ this object, and most callers should not use it. */
+ TARGET_OBJECT_RAW_MEMORY,
/* Kernel Unwind Table. See "ia64-tdep.c". */
TARGET_OBJECT_UNWIND_TABLE,
/* Transfer auxilliary vector. */
TARGET_OBJECT_AUXV,
/* StackGhost cookie. See "sparc-tdep.c". */
- TARGET_OBJECT_WCOOKIE
-
+ TARGET_OBJECT_WCOOKIE,
+ /* Target memory map in XML format. */
+ TARGET_OBJECT_MEMORY_MAP,
+ /* Flash memory. This object can be used to write contents to
+ a previously erased flash memory. Using it without erasing
+ flash can have unexpected results. Addresses are physical
+ address on target, and not relative to flash start. */
+ TARGET_OBJECT_FLASH,
+ /* Available target-specific features, e.g. registers and coprocessors.
+ See "target-descriptions.c". ANNEX should never be empty. */
+ TARGET_OBJECT_AVAILABLE_FEATURES,
+ /* Currently loaded libraries, in XML format. */
+ TARGET_OBJECT_LIBRARIES
/* Possible future objects: TARGET_OBJECT_FILE, TARGET_OBJECT_PROC, ... */
};
-extern LONGEST target_read_partial (struct target_ops *ops,
- enum target_object object,
- const char *annex, gdb_byte *buf,
- ULONGEST offset, LONGEST len);
+/* Request that OPS transfer up to LEN 8-bit bytes of the target's
+ OBJECT. The OFFSET, for a seekable object, specifies the
+ starting point. The ANNEX can be used to provide additional
+ data-specific information to the target.
-extern LONGEST target_write_partial (struct target_ops *ops,
- enum target_object object,
- const char *annex, const gdb_byte *buf,
- ULONGEST offset, LONGEST len);
+ Return the number of bytes actually transfered, or -1 if the
+ transfer is not supported or otherwise fails. Return of a positive
+ value less than LEN indicates that no further transfer is possible.
+ Unlike the raw to_xfer_partial interface, callers of these
+ functions do not need to retry partial transfers. */
-/* Wrappers to perform the full transfer. */
extern LONGEST target_read (struct target_ops *ops,
enum target_object object,
const char *annex, gdb_byte *buf,
ULONGEST offset, LONGEST len);
+extern LONGEST target_read_until_error (struct target_ops *ops,
+ enum target_object object,
+ const char *annex, gdb_byte *buf,
+ ULONGEST offset, LONGEST len);
+
extern LONGEST target_write (struct target_ops *ops,
enum target_object object,
const char *annex, const gdb_byte *buf,
ULONGEST offset, LONGEST len);
+/* Similar to target_write, except that it also calls PROGRESS with
+ the number of bytes written and the opaque BATON after every
+ successful partial write (and before the first write). This is
+ useful for progress reporting and user interaction while writing
+ data. To abort the transfer, the progress callback can throw an
+ exception. */
+
+LONGEST target_write_with_progress (struct target_ops *ops,
+ enum target_object object,
+ const char *annex, const gdb_byte *buf,
+ ULONGEST offset, LONGEST len,
+ void (*progress) (ULONGEST, void *),
+ void *baton);
+
+/* Wrapper to perform a full read of unknown size. OBJECT/ANNEX will
+ be read using OPS. The return value will be -1 if the transfer
+ fails or is not supported; 0 if the object is empty; or the length
+ of the object otherwise. If a positive value is returned, a
+ sufficiently large buffer will be allocated using xmalloc and
+ returned in *BUF_P containing the contents of the object.
+
+ This method should be used for objects sufficiently small to store
+ in a single xmalloc'd buffer, when no fixed bound on the object's
+ size is known in advance. Don't try to read TARGET_OBJECT_MEMORY
+ through this function. */
+
+extern LONGEST target_read_alloc (struct target_ops *ops,
+ enum target_object object,
+ const char *annex, gdb_byte **buf_p);
+
+/* Read OBJECT/ANNEX using OPS. The result is NUL-terminated and
+ returned as a string, allocated using xmalloc. If an error occurs
+ or the transfer is unsupported, NULL is returned. Empty objects
+ are returned as allocated but empty strings. A warning is issued
+ if the result contains any embedded NUL bytes. */
+
+extern char *target_read_stralloc (struct target_ops *ops,
+ enum target_object object,
+ const char *annex);
+
/* Wrappers to target read/write that perform memory transfers. They
throw an error if the memory transfer fails.
void (*to_disconnect) (struct target_ops *, char *, int);
void (*to_resume) (ptid_t, int, enum target_signal);
ptid_t (*to_wait) (ptid_t, struct target_waitstatus *);
- void (*to_fetch_registers) (int);
- void (*to_store_registers) (int);
- void (*to_prepare_to_store) (void);
+ void (*to_fetch_registers) (struct regcache *, int);
+ void (*to_store_registers) (struct regcache *, int);
+ void (*to_prepare_to_store) (struct regcache *);
/* Transfer LEN bytes of memory between GDB address MYADDR and
target address MEMADDR. If WRITE, transfer them to the target, else
int (*to_remove_watchpoint) (CORE_ADDR, int, int);
int (*to_insert_watchpoint) (CORE_ADDR, int, int);
int (*to_stopped_by_watchpoint) (void);
+ int to_have_steppable_watchpoint;
int to_have_continuable_watchpoint;
int (*to_stopped_data_address) (struct target_ops *, CORE_ADDR *);
+ int (*to_watchpoint_addr_within_range) (struct target_ops *,
+ CORE_ADDR, CORE_ADDR, int);
int (*to_region_ok_for_hw_watchpoint) (CORE_ADDR, int);
void (*to_terminal_init) (void);
void (*to_terminal_inferior) (void);
int (*to_follow_fork) (struct target_ops *, int);
void (*to_insert_exec_catchpoint) (int);
int (*to_remove_exec_catchpoint) (int);
- int (*to_reported_exec_events_per_exec_call) (void);
int (*to_has_exited) (int, int, int *);
void (*to_mourn_inferior) (void);
int (*to_can_run) (void);
char *(*to_extra_thread_info) (struct thread_info *);
void (*to_stop) (void);
void (*to_rcmd) (char *command, struct ui_file *output);
- struct symtab_and_line *(*to_enable_exception_callback) (enum
- exception_event_kind,
- int);
- struct exception_event_record *(*to_get_current_exception_event) (void);
char *(*to_pid_to_exec_file) (int pid);
+ void (*to_log_command) (const char *);
enum strata to_stratum;
int to_has_all_memory;
int to_has_memory;
/* ASYNC target controls */
int (*to_can_async_p) (void);
int (*to_is_async_p) (void);
- void (*to_async) (void (*cb) (enum inferior_event_type, void *context),
- void *context);
- int to_async_mask_value;
+ void (*to_async) (void (*) (enum inferior_event_type, void *), void *);
+ int (*to_async_mask) (int);
int (*to_find_memory_regions) (int (*) (CORE_ADDR,
unsigned long,
int, int, int,
CORE_ADDR load_module_addr,
CORE_ADDR offset);
- /* Perform partial transfers on OBJECT. See target_read_partial
- and target_write_partial for details of each variant. One, and
- only one, of readbuf or writebuf must be non-NULL. */
+ /* Request that OPS transfer up to LEN 8-bit bytes of the target's
+ OBJECT. The OFFSET, for a seekable object, specifies the
+ starting point. The ANNEX can be used to provide additional
+ data-specific information to the target.
+
+ Return the number of bytes actually transfered, zero when no
+ further transfer is possible, and -1 when the transfer is not
+ supported. Return of a positive value smaller than LEN does
+ not indicate the end of the object, only the end of the
+ transfer; higher level code should continue transferring if
+ desired. This is handled in target.c.
+
+ The interface does not support a "retry" mechanism. Instead it
+ assumes that at least one byte will be transfered on each
+ successful call.
+
+ NOTE: cagney/2003-10-17: The current interface can lead to
+ fragmented transfers. Lower target levels should not implement
+ hacks, such as enlarging the transfer, in an attempt to
+ compensate for this. Instead, the target stack should be
+ extended so that it implements supply/collect methods and a
+ look-aside object cache. With that available, the lowest
+ target can safely and freely "push" data up the stack.
+
+ See target_read and target_write for more information. One,
+ and only one, of readbuf or writebuf must be non-NULL. */
+
LONGEST (*to_xfer_partial) (struct target_ops *ops,
enum target_object object, const char *annex,
gdb_byte *readbuf, const gdb_byte *writebuf,
ULONGEST offset, LONGEST len);
+ /* Returns the memory map for the target. A return value of NULL
+ means that no memory map is available. If a memory address
+ does not fall within any returned regions, it's assumed to be
+ RAM. The returned memory regions should not overlap.
+
+ The order of regions does not matter; target_memory_map will
+ sort regions by starting address. For that reason, this
+ function should not be called directly except via
+ target_memory_map.
+
+ This method should not cache data; if the memory map could
+ change unexpectedly, it should be invalidated, and higher
+ layers will re-fetch it. */
+ VEC(mem_region_s) *(*to_memory_map) (struct target_ops *);
+
+ /* Erases the region of flash memory starting at ADDRESS, of
+ length LENGTH.
+
+ Precondition: both ADDRESS and ADDRESS+LENGTH should be aligned
+ on flash block boundaries, as reported by 'to_memory_map'. */
+ void (*to_flash_erase) (struct target_ops *,
+ ULONGEST address, LONGEST length);
+
+ /* Finishes a flash memory write sequence. After this operation
+ all flash memory should be available for writing and the result
+ of reading from areas written by 'to_flash_write' should be
+ equal to what was written. */
+ void (*to_flash_done) (struct target_ops *);
+
+ /* Describe the architecture-specific features of this target.
+ Returns the description found, or NULL if no description
+ was available. */
+ const struct target_desc *(*to_read_description) (struct target_ops *ops);
+
+ /* Read one auxv entry from *READPTR, not reading locations >= ENDPTR.
+ Return 0 if *READPTR is already at the end of the buffer.
+ Return -1 if there is insufficient buffer for a whole entry.
+ Return 1 if an entry was read into *TYPEP and *VALP. */
+ int (*to_auxv_parse) (struct target_ops *ops, gdb_byte **readptr,
+ gdb_byte *endptr, CORE_ADDR *typep, CORE_ADDR *valp);
+
+ /* Search SEARCH_SPACE_LEN bytes beginning at START_ADDR for the
+ sequence of bytes in PATTERN with length PATTERN_LEN.
+
+ The result is 1 if found, 0 if not found, and -1 if there was an error
+ requiring halting of the search (e.g. memory read error).
+ If the pattern is found the address is recorded in FOUND_ADDRP. */
+ int (*to_search_memory) (struct target_ops *ops,
+ CORE_ADDR start_addr, ULONGEST search_space_len,
+ const gdb_byte *pattern, ULONGEST pattern_len,
+ CORE_ADDR *found_addrp);
+
int to_magic;
/* Need sub-structure for target machine related rather than comm related?
*/
the target, or TARGET_SIGNAL_0 for no signal. The caller may not
pass TARGET_SIGNAL_DEFAULT. */
-#define target_resume(ptid, step, siggnal) \
- do { \
- dcache_invalidate(target_dcache); \
- (*current_target.to_resume) (ptid, step, siggnal); \
- } while (0)
+extern void target_resume (ptid_t ptid, int step, enum target_signal signal);
/* Wait for process pid to do something. PTID = -1 to wait for any
pid to do something. Return pid of child, or -1 in case of error;
/* Fetch at least register REGNO, or all regs if regno == -1. No result. */
-#define target_fetch_registers(regno) \
- (*current_target.to_fetch_registers) (regno)
+#define target_fetch_registers(regcache, regno) \
+ (*current_target.to_fetch_registers) (regcache, regno)
/* Store at least register REGNO, or all regs if REGNO == -1.
It can store as many registers as it wants to, so target_prepare_to_store
must have been previously called. Calls error() if there are problems. */
-#define target_store_registers(regs) \
- (*current_target.to_store_registers) (regs)
+#define target_store_registers(regcache, regs) \
+ (*current_target.to_store_registers) (regcache, regs)
/* Get ready to modify the registers array. On machines which store
individual registers, this doesn't need to do anything. On machines
that REGISTERS contains all the registers from the program being
debugged. */
-#define target_prepare_to_store() \
- (*current_target.to_prepare_to_store) ()
+#define target_prepare_to_store(regcache) \
+ (*current_target.to_prepare_to_store) (regcache)
extern DCACHE *target_dcache;
-extern int do_xfer_memory (CORE_ADDR memaddr, gdb_byte *myaddr, int len,
- int write, struct mem_attrib *attrib);
-
extern int target_read_string (CORE_ADDR, char **, int, int *);
extern int target_read_memory (CORE_ADDR memaddr, gdb_byte *myaddr, int len);
extern int xfer_memory (CORE_ADDR, gdb_byte *, int, int,
struct mem_attrib *, struct target_ops *);
-extern int child_xfer_memory (CORE_ADDR, gdb_byte *, int, int,
- struct mem_attrib *, struct target_ops *);
-
-/* Make a single attempt at transfering LEN bytes. On a successful
- transfer, the number of bytes actually transfered is returned and
- ERR is set to 0. When a transfer fails, -1 is returned (the number
- of bytes actually transfered is not defined) and ERR is set to a
- non-zero error indication. */
-
-extern int target_read_memory_partial (CORE_ADDR addr, gdb_byte *buf,
- int len, int *err);
-
-extern int target_write_memory_partial (CORE_ADDR addr, gdb_byte *buf,
- int len, int *err);
-
-extern char *child_pid_to_exec_file (int);
-
-extern char *child_core_file_to_sym_file (char *);
+/* Fetches the target's memory map. If one is found it is sorted
+ and returned, after some consistency checking. Otherwise, NULL
+ is returned. */
+VEC(mem_region_s) *target_memory_map (void);
-#if defined(CHILD_POST_ATTACH)
-extern void child_post_attach (int);
-#endif
-
-extern void child_post_startup_inferior (ptid_t);
-
-extern void child_acknowledge_created_inferior (int);
-
-extern void child_insert_fork_catchpoint (int);
-
-extern int child_remove_fork_catchpoint (int);
-
-extern void child_insert_vfork_catchpoint (int);
-
-extern int child_remove_vfork_catchpoint (int);
+/* Erase the specified flash region. */
+void target_flash_erase (ULONGEST address, LONGEST length);
-extern void child_acknowledge_created_inferior (int);
+/* Finish a sequence of flash operations. */
+void target_flash_done (void);
-extern int child_follow_fork (struct target_ops *, int);
+/* Describes a request for a memory write operation. */
+struct memory_write_request
+ {
+ /* Begining address that must be written. */
+ ULONGEST begin;
+ /* Past-the-end address. */
+ ULONGEST end;
+ /* The data to write. */
+ gdb_byte *data;
+ /* A callback baton for progress reporting for this request. */
+ void *baton;
+ };
+typedef struct memory_write_request memory_write_request_s;
+DEF_VEC_O(memory_write_request_s);
-extern void child_insert_exec_catchpoint (int);
+/* Enumeration specifying different flash preservation behaviour. */
+enum flash_preserve_mode
+ {
+ flash_preserve,
+ flash_discard
+ };
-extern int child_remove_exec_catchpoint (int);
+/* Write several memory blocks at once. This version can be more
+ efficient than making several calls to target_write_memory, in
+ particular because it can optimize accesses to flash memory.
-extern int child_reported_exec_events_per_exec_call (void);
+ Moreover, this is currently the only memory access function in gdb
+ that supports writing to flash memory, and it should be used for
+ all cases where access to flash memory is desirable.
-extern int child_has_exited (int, int, int *);
+ REQUESTS is the vector (see vec.h) of memory_write_request.
+ PRESERVE_FLASH_P indicates what to do with blocks which must be
+ erased, but not completely rewritten.
+ PROGRESS_CB is a function that will be periodically called to provide
+ feedback to user. It will be called with the baton corresponding
+ to the request currently being written. It may also be called
+ with a NULL baton, when preserved flash sectors are being rewritten.
-extern int child_thread_alive (ptid_t);
+ The function returns 0 on success, and error otherwise. */
+int target_write_memory_blocks (VEC(memory_write_request_s) *requests,
+ enum flash_preserve_mode preserve_flash_p,
+ void (*progress_cb) (ULONGEST, void *));
/* From infrun.c. */
#define target_remove_exec_catchpoint(pid) \
(*current_target.to_remove_exec_catchpoint) (pid)
-/* Returns the number of exec events that are reported when a process
- invokes a flavor of the exec() system call on this target, if exec
- events are being reported. */
-
-#define target_reported_exec_events_per_exec_call() \
- (*current_target.to_reported_exec_events_per_exec_call) ()
-
/* Returns TRUE if PID has exited. And, also sets EXIT_STATUS to the
exit code of PID, if any. */
/* Query for new threads and add them to the thread list. */
#define target_find_new_threads() \
- (*current_target.to_find_new_threads) (); \
+ (*current_target.to_find_new_threads) ()
/* Make target stop in a continuable fashion. (For instance, under
Unix, this should act like SIGSTOP). This function is normally
(*current_target.to_rcmd) (command, outbuf)
-/* Get the symbol information for a breakpointable routine called when
- an exception event occurs.
- Intended mainly for C++, and for those
- platforms/implementations where such a callback mechanism is available,
- e.g. HP-UX with ANSI C++ (aCC). Some compilers (e.g. g++) support
- different mechanisms for debugging exceptions. */
-
-#define target_enable_exception_callback(kind, enable) \
- (*current_target.to_enable_exception_callback) (kind, enable)
-
-/* Get the current exception event kind -- throw or catch, etc. */
-
-#define target_get_current_exception_event() \
- (*current_target.to_get_current_exception_event) ()
-
/* Does the target include all of memory, or only part of it? This
determines whether we look up the target chain for other parts of
memory if this target can't satisfy a request. */
(current_target.to_has_registers)
/* Does the target have execution? Can we make it jump (through
- hoops), or pop its stack a few times? FIXME: If this is to work that
- way, it needs to check whether an inferior actually exists.
- remote-udi.c and probably other targets can be the current target
- when the inferior doesn't actually exist at the moment. Right now
- this just tells us whether this target is *capable* of execution. */
+ hoops), or pop its stack a few times? This means that the current
+ target is currently executing; for some targets, that's the same as
+ whether or not the target is capable of execution, but there are
+ also targets which can be current while not executing. In that
+ case this will become true after target_create_inferior or
+ target_attach. */
#define target_has_execution \
(current_target.to_has_execution)
/* Can the target support the debugger control of thread execution?
- a) Can it lock the thread scheduler?
- b) Can it switch the currently running thread? */
+ Can it lock the thread scheduler? */
#define target_can_lock_scheduler \
(current_target.to_has_thread_control & tc_schedlock)
-#define target_can_switch_threads \
- (current_target.to_has_thread_control & tc_switch)
-
/* Can the target support asynchronous execution? */
#define target_can_async_p() (current_target.to_can_async_p ())
/* Is the target in asynchronous execution mode? */
-#define target_is_async_p() (current_target.to_is_async_p())
+#define target_is_async_p() (current_target.to_is_async_p ())
/* Put the target in async mode with the specified callback function. */
#define target_async(CALLBACK,CONTEXT) \
- (current_target.to_async((CALLBACK), (CONTEXT)))
+ (current_target.to_async ((CALLBACK), (CONTEXT)))
/* This is to be used ONLY within call_function_by_hand(). It provides
a workaround, to have inferior function calls done in sychronous
the turning async on and off to the single execution commands,
from where it is done currently, in remote_resume(). */
-#define target_async_mask_value \
- (current_target.to_async_mask_value)
-
-extern int target_async_mask (int mask);
+#define target_async_mask(MASK) \
+ (current_target.to_async_mask (MASK))
/* Converts a process id to a string. Usually, the string just contains
`process xyz', but on some systems it may contain
#define target_extra_thread_info(TP) \
(current_target.to_extra_thread_info (TP))
-/*
- * New Objfile Event Hook:
- *
- * Sometimes a GDB component wants to get notified whenever a new
- * objfile is loaded. Mainly this is used by thread-debugging
- * implementations that need to know when symbols for the target
- * thread implemenation are available.
- *
- * The old way of doing this is to define a macro 'target_new_objfile'
- * that points to the function that you want to be called on every
- * objfile/shlib load.
-
- The new way is to grab the function pointer,
- 'deprecated_target_new_objfile_hook', and point it to the function
- that you want to be called on every objfile/shlib load.
-
- If multiple clients are willing to be cooperative, they can each
- save a pointer to the previous value of
- deprecated_target_new_objfile_hook before modifying it, and arrange
- for their function to call the previous function in the chain. In
- that way, multiple clients can receive this notification (something
- like with signal handlers). */
-
-extern void (*deprecated_target_new_objfile_hook) (struct objfile *);
-
-#ifndef target_pid_or_tid_to_str
-#define target_pid_or_tid_to_str(ID) \
- target_pid_to_str (ID)
-#endif
-
/* Attempts to find the pathname of the executable file
that was run to create a specified process.
#define target_get_thread_local_address_p() \
(target_get_thread_local_address != NULL)
-/* Hook to call target dependent code just after inferior target process has
- started. */
-
-#ifndef TARGET_CREATE_INFERIOR_HOOK
-#define TARGET_CREATE_INFERIOR_HOOK(PID)
-#endif
/* Hardware watchpoint interfaces. */
(*current_target.to_stopped_by_watchpoint) ()
#endif
+/* Non-zero if we have steppable watchpoints */
+
+#ifndef HAVE_STEPPABLE_WATCHPOINT
+#define HAVE_STEPPABLE_WATCHPOINT \
+ (current_target.to_have_steppable_watchpoint)
+#endif
+
/* Non-zero if we have continuable watchpoints */
#ifndef HAVE_CONTINUABLE_WATCHPOINT
#define target_stopped_data_address_p(CURRENT_TARGET) (1)
#endif
-/* This will only be defined by a target that supports catching vfork events,
- such as HP-UX.
+#define target_watchpoint_addr_within_range(target, addr, start, length) \
+ (*target.to_watchpoint_addr_within_range) (target, addr, start, length)
- On some targets (such as HP-UX 10.20 and earlier), resuming a newly vforked
- child process after it has exec'd, causes the parent process to resume as
- well. To prevent the parent from running spontaneously, such targets should
- define this to a function that prevents that from happening. */
-#if !defined(ENSURE_VFORKING_PARENT_REMAINS_STOPPED)
-#define ENSURE_VFORKING_PARENT_REMAINS_STOPPED(PID) (0)
-#endif
+extern const struct target_desc *target_read_description (struct target_ops *);
-/* This will only be defined by a target that supports catching vfork events,
- such as HP-UX.
+/* Utility implementation of searching memory. */
+extern int simple_search_memory (struct target_ops* ops,
+ CORE_ADDR start_addr,
+ ULONGEST search_space_len,
+ const gdb_byte *pattern,
+ ULONGEST pattern_len,
+ CORE_ADDR *found_addrp);
- On some targets (such as HP-UX 10.20 and earlier), a newly vforked child
- process must be resumed when it delivers its exec event, before the parent
- vfork event will be delivered to us. */
+/* Main entry point for searching memory. */
+extern int target_search_memory (CORE_ADDR start_addr,
+ ULONGEST search_space_len,
+ const gdb_byte *pattern,
+ ULONGEST pattern_len,
+ CORE_ADDR *found_addrp);
-#if !defined(RESUME_EXECD_VFORKING_CHILD_TO_GET_PARENT_VFORK)
-#define RESUME_EXECD_VFORKING_CHILD_TO_GET_PARENT_VFORK() (0)
-#endif
+/* Command logging facility. */
+
+#define target_log_command(p) \
+ do \
+ if (current_target.to_log_command) \
+ (*current_target.to_log_command) (p); \
+ while (0)
/* Routines for maintenance of the target structures...
extern int unpush_target (struct target_ops *);
+extern void target_pre_inferior (int);
+
extern void target_preopen (int);
extern void pop_target (void);
+extern CORE_ADDR target_translate_tls_address (struct objfile *objfile,
+ CORE_ADDR offset);
+
+/* Mark a pushed target as running or exited, for targets which do not
+ automatically pop when not active. */
+
+void target_mark_running (struct target_ops *);
+
+void target_mark_exited (struct target_ops *);
+
/* Struct section_table maps address ranges to file sections. It is
mostly used with BFD files, but can be used without (e.g. for handling
raw disks, or files not in formats handled by BFD). */
extern int memory_insert_breakpoint (struct bp_target_info *);
-extern int default_memory_remove_breakpoint (struct bp_target_info *);
+extern int default_memory_remove_breakpoint (struct gdbarch *, struct bp_target_info *);
-extern int default_memory_insert_breakpoint (struct bp_target_info *);
+extern int default_memory_insert_breakpoint (struct gdbarch *, struct bp_target_info *);
/* From target.c */
extern void noprocess (void);
+extern void target_require_runnable (void);
+
extern void find_default_attach (char *, int);
extern void find_default_create_inferior (char *, char *, char **, int);
extern enum target_signal target_signal_from_host (int);
extern int target_signal_to_host (enum target_signal);
+extern enum target_signal default_target_signal_from_host (struct gdbarch *,
+ int);
+extern int default_target_signal_to_host (struct gdbarch *,
+ enum target_signal);
+
/* Convert from a number used in a GDB command to an enum target_signal. */
extern enum target_signal target_signal_from_command (int);
/* Any target can call this to switch to remote protocol (in remote.c). */
extern void push_remote_target (char *name, int from_tty);
+
+/* Set the show memory breakpoints mode to show, and installs a cleanup
+ to restore it back to the current value. */
+extern struct cleanup *make_show_memory_breakpoints_cleanup (int show);
+
\f
/* Imported from machine dependent code */
projects / deliverable / binutils-gdb.git / blobdiff