-# Copyright (C) 1999
-# Free Software Foundation, Inc.
+# Copyright 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009,
+# 2010 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
-#
+#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
-#
+#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-# Please email any bugs, comments, and/or additions to this file to:
-# bug-gdb@prep.ai.mit.edu
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
# This file was written by Elena Zannoni (ezannoni@cygnus.com)
}
+# are we on a target board? If so, don't run these tests.
+# note: this is necessary because we cannot use runto_main (which would
+# work for remote targets too) because of the different prompt we get
+# when using annotation level 2.
+#
+if [is_remote target] then {
+ return 0
+}
+
+
#
# test running programs
#
set srcfile ${testfile}.c
set binfile ${objdir}/${subdir}/${testfile}
-if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-w}] != "" } {
- gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
-}
-
-
-# are we on a target board? If so, don't run these tests.
-# note: this is necessary because we cannot use runto_main (which would
-# work for remote targets too) because of the different prompt we get
-# when using annotation level 2.
-#
-if ![isnative] then {
- return 0
+if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug nowarnings}] != "" } {
+ untested annota1.exp
+ return -1
}
set old_gdb_prompt $gdb_prompt
set gdb_prompt "\r\n\032\032pre-prompt\r\n$gdb_prompt \r\n\032\032prompt\r\n"
+#
+# Escape all the characters in the path that need it. For instance
+# the directory name could contain '+'.
+#
+set escapedsrcfile [string_to_regexp ${srcdir}/${subdir}/${srcfile}]
#
#
send_gdb "info break\n"
gdb_expect {
- -re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-headers\r\n\r\n\032\032field 0\r\nNum \r\n\032\032field 1\r\nType \r\n\032\032field 2\r\nDisp \r\n\032\032field 3\r\nEnb \r\n\032\032field 4\r\nAddress \r\n\032\032field 5\r\nWhat\r\n\r\n\032\032breakpoints-table\r\n\r\n\032\032record\r\n\r\n\032\032field 0\r\n1 \r\n\032\032field 1\r\nbreakpoint \r\n\032\032field 2\r\nkeep \r\n\032\032field 3\r\ny \r\n\032\032field 4\r\n$hex \r\n\032\032field 5\r\nin main at ${srcdir}/${subdir}/${srcfile}:$main_line\r\n\r\n\032\032breakpoints-table-end\r\n$gdb_prompt$" \
+ -re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-headers\r\n\r\n\032\032field 0\r\nNum \r\n\032\032field 1\r\nType \r\n\032\032field 2\r\nDisp \r\n\032\032field 3\r\nEnb \r\n\032\032field 4\r\nAddress +\r\n\032\032field 5\r\nWhat\r\n\r\n\032\032breakpoints-table\r\n\r\n\032\032record\r\n\r\n\032\032field 0\r\n1 \r\n\032\032field 1\r\nbreakpoint \r\n\032\032field 2\r\nkeep \r\n\032\032field 3\r\ny \r\n\032\032field 4\r\n$hex +\r\n\032\032field 5\r\nin main at ${escapedsrcfile}:$main_line\r\n\r\n\032\032breakpoints-table-end\r\n$gdb_prompt$" \
{pass "breakpoint info"}
+ -re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-headers\r\n\r\n\032\032field 0\r\nNum \r\n\032\032field 1\r\nType \r\n\032\032field 2\r\nDisp \r\n\032\032field 3\r\nEnb \r\n\032\032field 4\r\nAddress +\r\n\032\032field 5\r\nWhat\r\n\r\n\032\032breakpoints-table\r\n\r\n\032\032record\r\n\r\n\032\032field 0\r\n1 \r\n\032\032field 1\r\nbreakpoint \r\n\032\032field 2\r\nkeep \r\n\032\032field 3\r\ny \r\n\032\032field 4\r\n$hex +\r\n\032\032field 5\r\nin main at .*${srcfile}:$main_line\r\n\r\n\032\032breakpoints-table-end\r\n$gdb_prompt$" \
+ { setup_xfail "*-*-*" 1270
+ fail "breakpoint info"}
-re ".*$gdb_prompt$" { fail "breakpoint info" }
timeout { fail "breakpoint info (timeout)" }
}
# annotate-stopped
#
#exp_internal 1
+set binexp [string_to_regexp $binfile]
send_gdb "run\n"
- gdb_expect {
- -re "\r\n\032\032post-prompt\r\nStarting program: $binfile \(\r\n\r\n\032\032frames-invalid\)+\(\r\n\r\n\032\032breakpoints-invalid\)*.*\(\r\n\r\n\032\032frames-invalid\)*\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)+\r\n\r\n\032\032breakpoint 1\r\n\r\nBreakpoint 1, \r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nmain\r\n\032\032frame-args\r\n \\(\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n.*annota1.c\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n$main_line\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source.*$srcfile:$main_line:.*:beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n.*$gdb_prompt$" \
- { pass "run until main breakpoint" }
- -re ".*$gdb_prompt$" { fail "run until main breakpoint" }
- timeout { fail "run until main breakpoint (timeout)" }
+gdb_expect {
+ -re "\r\n\032\032post-prompt\r\nStarting program: $binexp \(\(\r\n\r\n\032\032frames-invalid\)|\(\r\n\r\n\032\032breakpoints-invalid\)\)+\r\n\r\n\032\032starting\(\(\r\n\r\n\032\032frames-invalid\)|\(\r\n\r\n\032\032breakpoints-invalid\)\)*\r\n\r\n\032\032breakpoint 1\r\n\r\nBreakpoint 1, \r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nmain\r\n\032\032frame-args\r\n \\(\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n.*annota1.c\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n$main_line\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source.*$srcfile:$main_line:.*:beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped.*$gdb_prompt$" {
+ pass "run until main breakpoint"
+ }
+ -re ".*$gdb_prompt$" {
+ fail "run until main breakpoint"
+ }
+ timeout {
+ fail "run until main breakpoint (timeout)"
+ }
}
#exp_internal 0
#exit 0
gdb_expect {
-re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-invalid\r\nBreakpoint.*at $hex.*$gdb_prompt$" \
{ pass "breakpoint printf" }
+ -re "\r\n\032\032post-prompt\r\nwarning: Breakpoint address adjusted from $hex to $hex.\r\n\r\n\032\032breakpoints-invalid\r\nBreakpoint.*at $hex.*$gdb_prompt$" \
+ { pass "breakpoint printf"}
-re ".*$gdb_prompt$" { fail "break printf" }
timeout { fail "break printf (timeout)" }
}
#
# get to printf
#
-send_gdb "continue\n"
-gdb_expect {
- -re "\r\n\032\032post-prompt\r\nContinuing.\r\n\r\n\032\032starting\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032breakpoint 3\r\n\r\nBreakpoint 3, \r\n\032\032frame-begin 0 $hex\r\n\r\n(\032\032frame-address\r\n$hex\r\n\032\032frame-address-end\r\n in \r\n)*\032\032frame-function-name\r\nprintf\r\n\032\032frame-args\r\n.*\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" \
- { pass "continue to printf" }
- -re ".*$gdb_prompt$" { fail "continue to printf" }
- timeout { fail "continue to printf (timeout)" }
+set pat_begin "\r\n\032\032post-prompt\r\nContinuing.\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)+\r\n"
+set pat_adjust "warning: Breakpoint 3 address previously adjusted from $hex to $hex.\r\n"
+set pat_end "\r\n\032\032breakpoint 3\r\n\r\nBreakpoint 3, \r\n\032\032frame-begin 0 $hex\r\n\r\n(\032\032frame-address\r\n$hex\r\n\032\032frame-address-end\r\n in \r\n)*.*\032\032frame-function-name\r\n.*printf(@.*)?\r\n\032\032frame-args\r\n.*\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$"
+
+gdb_test_multiple "continue" "continue to printf" {
+ -re "${pat_begin}($pat_adjust)?$pat_end" {
+ pass "continue to printf"
+ }
+ -re ".*$gdb_prompt$" { fail "continue to printf" }
}
#
# annotate-frame-address
# annotate-frame-address-end
#
+set pat_begin "\r\n\032\032post-prompt\r\n\r\n\032\032frame-begin 0 $hex\r\n.0 \r\n(\032\032frame-address\r\n$hex\r\n\032\032frame-address-end\r\n in \r\n)*\032\032frame-function-name\r\n.*printf(@.*)?\r\n\032\032frame-args\r\n \\(.*frame-end\r\n\r\n\032\032frame-begin 1 $hex\r\n.1 \r\n\032\032frame-address\r\n$hex\r\n\032\032frame-address-end\r\n in \r\n\032\032frame-function-name\r\nmain\r\n\032\032frame-args\r\n \\(\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n"
+set pat_end "\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n.*\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032frame-end\r\n(\r\n\032\032frame-begin .*\r\n\r\n\032\032frame-end\r\n)*$gdb_prompt$"
send_gdb "backtrace\n"
gdb_expect {
- -re "\r\n\032\032post-prompt\r\n\r\n\032\032frame-begin 0 $hex\r\n.0 \r\n(\032\032frame-address\r\n$hex\r\n\032\032frame-address-end\r\n in \r\n)*\032\032frame-function-name\r\nprintf\r\n\032\032frame-args\r\n \\(.*frame-end\r\n\r\n\032\032frame-begin 1 $hex\r\n.1 \r\n\032\032frame-address\r\n$hex\r\n\032\032frame-address-end\r\n in \r\n\032\032frame-function-name\r\nmain\r\n\032\032frame-args\r\n \\(\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n${srcdir}/${subdir}/${srcfile}\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n.*\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032frame-end\r\n$gdb_prompt$" \
- { pass "bactrace from shlibrary" }
- -re ".*$gdb_prompt$" { fail "backtrace from shlibrary" }
- timeout { fail "backtrace from shlibrary (timeout)" }
+ -re "$pat_begin$escapedsrcfile$pat_end"
+ { pass "backtrace from shlibrary" }
+ -re "$pat_begin.*$srcfile$pat_end"
+ { setup_xfail "*-*-*" 1270
+ fail "backtrace from shlibrary" }
+ -re ".*$gdb_prompt$" { fail "backtrace from shlibrary" }
+ timeout { fail "backtrace from shlibrary (timeout)" }
}
# annotate-arg-value
# annotate-arg-end
#
-send_gdb "signal SIGUSR1\n"
-gdb_expect {
- -re "\r\n\032\032post-prompt\r\nContinuing with signal SIGUSR1.\r\n\r\n\032\032starting\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032breakpoint 2\r\n\r\nBreakpoint 2, \r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nhandle_USR1\r\n\032\032frame-args\r\n \\(\r\n\032\032arg-begin\r\nsig\r\n\032\032arg-name-end\r\n=\r\n\032\032arg-value -\r\n$decimal\r\n\032\032arg-end\r\n\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n${srcdir}/${subdir}/${srcfile}\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n.*\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source.*annota1.c:.*:.*:beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" \
- { pass "send SIGUSR1" }
- -re ".*$gdb_prompt$" { fail "send SIGUSR1" }
- timeout { fail "send SIGUSR1 (timeout)" }
-}
+if [target_info exists gdb,nosignals] {
+ unsupported "send SIGUSR1"
+ unsupported "backtrace @ signal handler"
+} else {
+ send_gdb "signal SIGUSR1\n"
+ gdb_expect {
+ -re "\r\n\032\032post-prompt\r\nContinuing with signal SIGUSR1.\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)+\r\n\r\n\032\032breakpoint 2\r\n\r\nBreakpoint 2, \r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nhandle_USR1\r\n\032\032frame-args\r\n \\(\r\n\032\032arg-begin\r\nsig\r\n\032\032arg-name-end\r\n=\r\n\032\032arg-value -\r\n$decimal\r\n\032\032arg-end\r\n\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n${escapedsrcfile}\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n.*\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source.*annota1.c:.*:.*:beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" \
+ { pass "send SIGUSR1" }
+ -re "\r\n\032\032post-prompt\r\nContinuing with signal SIGUSR1.\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)+\r\n\r\n\032\032breakpoint 2\r\n\r\nBreakpoint 2, \r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nhandle_USR1\r\n\032\032frame-args\r\n \\(\r\n\032\032arg-begin\r\nsig\r\n\032\032arg-name-end\r\n=\r\n\032\032arg-value -\r\n$decimal\r\n\032\032arg-end\r\n\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n.*${srcfile}\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n.*\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source.*annota1.c:.*:.*:beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" \
+ { setup_xfail "*-*-*" 1270
+ fail "send SIGUSR1" }
+ -re ".*$gdb_prompt$" { fail "send SIGUSR1" }
+ timeout { fail "send SIGUSR1 (timeout)" }
+ }
-#
-# test:
-# annotate-signal-handler-caller
-#
-verbose "match_max local is: [match_max]"
-verbose "match_max default is: [match_max -d]"
-# This is necessary because a 2000 buffer is not enought to get everything
-# up to the prompt ad the test gets a timeout.
-match_max 3000
-verbose "match_max now is: [match_max]"
-send_gdb "backtrace\n"
-gdb_expect {
- -re "frame-begin 0 $hex\r\n#0.*frame-end.*frame-begin 1 $hex\r\n#1.*(\032\032signal-handler-caller\r\n.signal handler called.\r\n\r\n)*\032\032frame-end\r\n\r\n\032\032frame-begin 2 $hex\r\n#2.*(frame-begin 3 $hex\r\n#3.*)*frame-end.*$gdb_prompt$" {
- pass "backtrace @ signal handler"
+ #
+ # test:
+ # annotate-signal-handler-caller
+ #
+ send_gdb "backtrace\n"
+ gdb_expect {
+ -re "frame-begin 0 $hex\r\n#0.*frame-end.*frame-begin 1 $hex\r\n#1.*(\032\032signal-handler-caller\r\n.signal handler called.\r\n\r\n)+\032\032frame-end\r\n\r\n\032\032frame-begin 2 $hex\r\n#2.*(frame-begin 3 $hex\r\n#3.*)*frame-end.*$gdb_prompt$" {
+ pass "backtrace @ signal handler"
+ }
+ -re ".*$gdb_prompt$" { fail "backtrace @ signal handler" }
+ timeout { fail "backtrace @ signal handler (timeout)" }
}
- -re ".*$gdb_prompt$" { fail "backtrace @ signal handler" }
- timeout { fail "backtrace @ signal handler (timeout)" }
}
#
#
send_gdb "break main\n"
gdb_expect {
- -re "post-prompt.*\032\032breakpoints-invalid.*Breakpoint 4 at $hex: file ${srcdir}/${subdir}/${srcfile}, line $main_line.*$gdb_prompt$" \
+ -re "post-prompt.*\032\032breakpoints-invalid.*Breakpoint 4 at $hex: file ${escapedsrcfile}, line $main_line.*$gdb_prompt$" \
{ pass "break at 28" }
+ -re "post-prompt.*\032\032breakpoints-invalid.*Breakpoint 4 at $hex: file .*${srcfile}, line $main_line.*$gdb_prompt$" \
+ { setup_xfail "*-*-*" 1270
+ fail "break at 28" }
-re ".*$gdb_prompt$" { fail "break at 28" }
timeout { fail "break at 28 (timeout)" }
}
# FIXME: annotate-signal not tested (requires that the inferior be
# stopped by a "random" signal)
#
-send_gdb "signal SIGTRAP\n"
-gdb_expect {
- -re ".*\032\032post-prompt\r\nContinuing with signal SIGTRAP.\r\n\r\n\032\032starting\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032signalled\r\n\r\nProgram terminated with signal \r\n\032\032signal-name\r\nSIGTRAP\r\n\032\032signal-name-end\r\n, \r\n\032\032signal-string\r\nTrace.breakpoint trap\r\n\032\032signal-string-end\r\n.\r\nThe program no longer exists.\r\n\r\n\032\032stopped\r\n$gdb_prompt$" \
- { pass "signal sent" }
- -re ".*$gdb_prompt$" { fail "signal sent" }
- timeout { fail "signal sent (timeout)" }
+# SIGTRAP signals are dropped before they get to the inferior process
+# on hpux11. In theory, this behaivor can be controlled by setting
+# TTEO_NORM_SIGTRAP in the inferior, but doing so did not cause
+# the signal to be properly delivered.
+#
+# It has been verified that other signals will be delivered. However,
+# rather than twiddle the test, I choose to leave it as-is as it
+# exposes an interesting failure on hpux11.
+
+if [target_info exists gdb,nosignals] {
+ unsupported "signal sent"
+} else {
+ setup_xfail hppa*-*-hpux11*
+ send_gdb "signal SIGTRAP\n"
+ gdb_expect {
+ -re ".*\032\032post-prompt\r\nContinuing with signal SIGTRAP.\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)+\r\n\r\n\032\032signalled\r\n\r\nProgram terminated with signal \r\n\032\032signal-name\r\nSIGTRAP\r\n\032\032signal-name-end\r\n, \r\n\032\032signal-string\r\nTrace.breakpoint trap\r\n\032\032signal-string-end\r\n.\r\nThe program no longer exists.\r\n\r\n\032\032stopped\r\n$gdb_prompt$" \
+ { pass "signal sent" }
+ -re ".*$gdb_prompt$" { fail "signal sent" }
+ timeout { fail "signal sent (timeout)" }
+ }
}
-# Check for production of a core file
-# and remove it!
+# Check for production of a core file and remove it!
set exec_output [remote_exec build "ls core"]
+set test "cleanup core file"
if [ regexp "core not found" $exec_output] {
- pass "No core dumped"
+ pass "$test (not dumped)"
} else {
- if [ regexp "No such file or directory" $exec_output] {
- pass "No core dumped"
- } else {
- remote_exec build "rm -f core"
- pass "Core dumped and removed"
- }
+ if [ regexp "No such file or directory" $exec_output] {
+ pass "$test (not dumped)"
+ } else {
+ remote_exec build "rm -f core"
+ pass "$test (removed)"
+ }
}
+proc thread_test {} {
+ global objdir subdir srcdir testfile
+ global gdb_prompt old_gdb_prompt
+ set srcfile watch_thread_num.c
+ set binfile ${objdir}/${subdir}/${testfile}-watch_thread_num
+ set gdb_prompt $old_gdb_prompt
+
+ if { ![get_compiler_info ${binfile}] && [gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug nowarnings}] == "" } {
+
+ gdb_exit
+ gdb_start
+ gdb_reinitialize_dir $srcdir/$subdir
+ gdb_load ${binfile}
+ if { ![runto main] } then {
+ fail "run to main"
+ return
+ }
+
+ set gdb_prompt \
+ "\r\n\032\032pre-prompt\r\n$gdb_prompt \r\n\032\032prompt\r\n"
+
+ send_gdb "set annotate 2\n"
+ gdb_expect {
+ -re "set annotate 2\r\n$gdb_prompt$" {}
+ }
+
+ send_gdb "next 2\n"
+ gdb_expect {
+ -re ".*\032\032new-thread" {
+ pass "new thread"
+ }
+ timeout { fail "new thread (timeout)" }
+ }
+ }
+}
+
+proc thread_switch {} {
+ send_gdb "thread 1\n"
+ gdb_expect {
+ -re ".*\032\032thread-changed" {
+ pass "thread switch"
+ }
+ timeout { fail "thread switch (timeout)" }
+ }
+}
+
+thread_test
+thread_switch
+
# restore the original prompt for the rest of the testsuite
set gdb_prompt $old_gdb_prompt
projects / deliverable / binutils-gdb.git / blobdiff