-# Copyright (C) 1999
+# Copyright 1999, 2000, 2001, 2002, 2003
# Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
}
+# are we on a target board? If so, don't run these tests.
+# note: this is necessary because we cannot use runto_main (which would
+# work for remote targets too) because of the different prompt we get
+# when using annotation level 2.
+#
+if [is_remote target] then {
+ return 0
+}
+
+
#
# test running programs
#
}
-# are we on a target board? If so, don't run these tests.
-# note: this is necessary because we cannot use runto_main (which would
-# work for remote targets too) because of the different prompt we get
-# when using annotation level 2.
-#
-if ![isnative] then {
- return 0
-}
-
-
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
set old_gdb_prompt $gdb_prompt
set gdb_prompt "\r\n\032\032pre-prompt\r\n$gdb_prompt \r\n\032\032prompt\r\n"
+#
+# Escape all the characters in the path that need it. For instance
+# the directory name could contain '+'.
+#
+set escapedsrcfile [string_to_regexp ${srcdir}/${subdir}/${srcfile}]
#
#
send_gdb "info break\n"
gdb_expect {
- -re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-headers\r\n\r\n\032\032field 0\r\nNum \r\n\032\032field 1\r\nType \r\n\032\032field 2\r\nDisp \r\n\032\032field 3\r\nEnb \r\n\032\032field 4\r\nAddress \r\n\032\032field 5\r\nWhat\r\n\r\n\032\032breakpoints-table\r\n\r\n\032\032record\r\n\r\n\032\032field 0\r\n1 \r\n\032\032field 1\r\nbreakpoint \r\n\032\032field 2\r\nkeep \r\n\032\032field 3\r\ny \r\n\032\032field 4\r\n$hex \r\n\032\032field 5\r\nin main at ${srcdir}/${subdir}/${srcfile}:$main_line\r\n\r\n\032\032breakpoints-table-end\r\n$gdb_prompt$" \
+ -re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-headers\r\n\r\n\032\032field 0\r\nNum \r\n\032\032field 1\r\nType \r\n\032\032field 2\r\nDisp \r\n\032\032field 3\r\nEnb \r\n\032\032field 4\r\nAddress +\r\n\032\032field 5\r\nWhat\r\n\r\n\032\032breakpoints-table\r\n\r\n\032\032record\r\n\r\n\032\032field 0\r\n1 \r\n\032\032field 1\r\nbreakpoint \r\n\032\032field 2\r\nkeep \r\n\032\032field 3\r\ny \r\n\032\032field 4\r\n$hex +\r\n\032\032field 5\r\nin main at ${escapedsrcfile}:$main_line\r\n\r\n\032\032breakpoints-table-end\r\n$gdb_prompt$" \
{pass "breakpoint info"}
+ -re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-headers\r\n\r\n\032\032field 0\r\nNum \r\n\032\032field 1\r\nType \r\n\032\032field 2\r\nDisp \r\n\032\032field 3\r\nEnb \r\n\032\032field 4\r\nAddress +\r\n\032\032field 5\r\nWhat\r\n\r\n\032\032breakpoints-table\r\n\r\n\032\032record\r\n\r\n\032\032field 0\r\n1 \r\n\032\032field 1\r\nbreakpoint \r\n\032\032field 2\r\nkeep \r\n\032\032field 3\r\ny \r\n\032\032field 4\r\n$hex +\r\n\032\032field 5\r\nin main at .*${srcfile}:$main_line\r\n\r\n\032\032breakpoints-table-end\r\n$gdb_prompt$" \
+ { setup_xfail "*-*-*" 1270
+ fail "breakpoint info"}
-re ".*$gdb_prompt$" { fail "breakpoint info" }
timeout { fail "breakpoint info (timeout)" }
}
#
#exp_internal 1
send_gdb "run\n"
- gdb_expect {
- -re "\r\n\032\032post-prompt\r\nStarting program: $binfile \(\r\n\r\n\032\032frames-invalid\)+\(\r\n\r\n\032\032breakpoints-invalid\)*.*\(\r\n\r\n\032\032frames-invalid\)*\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)+\r\n\r\n\032\032breakpoint 1\r\n\r\nBreakpoint 1, \r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nmain\r\n\032\032frame-args\r\n \\(\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n.*annota1.c\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n$main_line\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source.*$srcfile:$main_line:.*:beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n.*$gdb_prompt$" \
- { pass "run until main breakpoint" }
- -re ".*$gdb_prompt$" { fail "run until main breakpoint" }
- timeout { fail "run until main breakpoint (timeout)" }
+gdb_expect {
+ -re "\r\n\032\032post-prompt\r\nStarting program: $binfile \(\r\n\r\n\032\032frames-invalid\)+\(\(\r\n\r\n\032\032frames-invalid\)|\(\r\n\r\n\032\032breakpoints-invalid\)\)*\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)+\(\(\r\n\r\n\032\032frames-invalid\)|\(\r\n\r\n\032\032breakpoints-invalid\)\)*\r\n\r\n\032\032breakpoint 1\r\n\r\nBreakpoint 1, \r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nmain\r\n\032\032frame-args\r\n \\(\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n.*annota1.c\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n$main_line\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source.*$srcfile:$main_line:.*:beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped.*$gdb_prompt$" {
+ pass "run until main breakpoint"
+ }
+ -re ".*$gdb_prompt$" {
+ fail "run until main breakpoint"
+ }
+ timeout {
+ fail "run until main breakpoint (timeout)"
+ }
}
#exp_internal 0
#exit 0
#
send_gdb "backtrace\n"
gdb_expect {
- -re "\r\n\032\032post-prompt\r\n\r\n\032\032frame-begin 0 $hex\r\n.0 \r\n(\032\032frame-address\r\n$hex\r\n\032\032frame-address-end\r\n in \r\n)*\032\032frame-function-name\r\nprintf\r\n\032\032frame-args\r\n \\(.*frame-end\r\n\r\n\032\032frame-begin 1 $hex\r\n.1 \r\n\032\032frame-address\r\n$hex\r\n\032\032frame-address-end\r\n in \r\n\032\032frame-function-name\r\nmain\r\n\032\032frame-args\r\n \\(\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n${srcdir}/${subdir}/${srcfile}\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n.*\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032frame-end\r\n$gdb_prompt$" \
- { pass "bactrace from shlibrary" }
+ -re "\r\n\032\032post-prompt\r\n\r\n\032\032frame-begin 0 $hex\r\n.0 \r\n(\032\032frame-address\r\n$hex\r\n\032\032frame-address-end\r\n in \r\n)*\032\032frame-function-name\r\nprintf\r\n\032\032frame-args\r\n \\(.*frame-end\r\n\r\n\032\032frame-begin 1 $hex\r\n.1 \r\n\032\032frame-address\r\n$hex\r\n\032\032frame-address-end\r\n in \r\n\032\032frame-function-name\r\nmain\r\n\032\032frame-args\r\n \\(\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n${escapedsrcfile}\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n.*\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032frame-end\r\n(\r\n\032\032frame-begin .*\r\n\r\n\032\032frame-end\r\n)*$gdb_prompt$" \
+ { pass "backtrace from shlibrary" }
+ -re "\r\n\032\032post-prompt\r\n\r\n\032\032frame-begin 0 $hex\r\n.0 \r\n(\032\032frame-address\r\n$hex\r\n\032\032frame-address-end\r\n in \r\n)*\032\032frame-function-name\r\nprintf\r\n\032\032frame-args\r\n \\(.*frame-end\r\n\r\n\032\032frame-begin 1 $hex\r\n.1 \r\n\032\032frame-address\r\n$hex\r\n\032\032frame-address-end\r\n in \r\n\032\032frame-function-name\r\nmain\r\n\032\032frame-args\r\n \\(\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n.*${srcfile}\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n.*\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032frame-end\r\n(\r\n\032\032frame-begin .*\r\n\r\n\032\032frame-end\r\n)*$gdb_prompt$" \
+ { setup_xfail "*-*-*" 1270
+ fail "backtrace from shlibrary" }
-re ".*$gdb_prompt$" { fail "backtrace from shlibrary" }
timeout { fail "backtrace from shlibrary (timeout)" }
}
#
send_gdb "signal SIGUSR1\n"
gdb_expect {
- -re "\r\n\032\032post-prompt\r\nContinuing with signal SIGUSR1.\r\n\r\n\032\032starting\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032breakpoint 2\r\n\r\nBreakpoint 2, \r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nhandle_USR1\r\n\032\032frame-args\r\n \\(\r\n\032\032arg-begin\r\nsig\r\n\032\032arg-name-end\r\n=\r\n\032\032arg-value -\r\n$decimal\r\n\032\032arg-end\r\n\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n${srcdir}/${subdir}/${srcfile}\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n.*\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source.*annota1.c:.*:.*:beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" \
+ -re "\r\n\032\032post-prompt\r\nContinuing with signal SIGUSR1.\r\n\r\n\032\032starting\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032breakpoint 2\r\n\r\nBreakpoint 2, \r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nhandle_USR1\r\n\032\032frame-args\r\n \\(\r\n\032\032arg-begin\r\nsig\r\n\032\032arg-name-end\r\n=\r\n\032\032arg-value -\r\n$decimal\r\n\032\032arg-end\r\n\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n${escapedsrcfile}\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n.*\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source.*annota1.c:.*:.*:beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" \
{ pass "send SIGUSR1" }
+ -re "\r\n\032\032post-prompt\r\nContinuing with signal SIGUSR1.\r\n\r\n\032\032starting\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032breakpoint 2\r\n\r\nBreakpoint 2, \r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nhandle_USR1\r\n\032\032frame-args\r\n \\(\r\n\032\032arg-begin\r\nsig\r\n\032\032arg-name-end\r\n=\r\n\032\032arg-value -\r\n$decimal\r\n\032\032arg-end\r\n\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n.*${srcfile}\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n.*\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source.*annota1.c:.*:.*:beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" \
+ { setup_xfail "*-*-*" 1270
+ fail "send SIGUSR1" }
-re ".*$gdb_prompt$" { fail "send SIGUSR1" }
timeout { fail "send SIGUSR1 (timeout)" }
}
verbose "match_max now is: [match_max]"
send_gdb "backtrace\n"
gdb_expect {
- -re "frame-begin 0 $hex.*0.*frame-end.*frame-begin 1 $hex.*1.*(\032\032signal-handler-caller\r\n.signal handler called.\r\n\r\n)*\032\032frame-end\r\n\r\n\032\032frame-begin 2 $hex.*2.*(frame-begin 3 $hex.*3.*)*frame-end.*$gdb_prompt$" \
- { pass "backtrace @ signal handler" }
- -re ".*$gdb_prompt$" { fail "backtrace @ signal handler" }
- timeout { fail "backtrace @ signal handler (timeout)" }
+ -re "frame-begin 0 $hex\r\n#0.*frame-end.*frame-begin 1 $hex\r\n#1.*(\032\032signal-handler-caller\r\n.signal handler called.\r\n\r\n)+\032\032frame-end\r\n\r\n\032\032frame-begin 2 $hex\r\n#2.*(frame-begin 3 $hex\r\n#3.*)*frame-end.*$gdb_prompt$" {
+ pass "backtrace @ signal handler"
+ }
+ -re ".*$gdb_prompt$" { fail "backtrace @ signal handler" }
+ timeout { fail "backtrace @ signal handler (timeout)" }
}
#
#
send_gdb "break main\n"
gdb_expect {
- -re "post-prompt.*\032\032breakpoints-invalid.*Breakpoint 4 at $hex: file ${srcdir}/${subdir}/${srcfile}, line $main_line.*$gdb_prompt$" \
+ -re "post-prompt.*\032\032breakpoints-invalid.*Breakpoint 4 at $hex: file ${escapedsrcfile}, line $main_line.*$gdb_prompt$" \
{ pass "break at 28" }
+ -re "post-prompt.*\032\032breakpoints-invalid.*Breakpoint 4 at $hex: file .*${srcfile}, line $main_line.*$gdb_prompt$" \
+ { setup_xfail "*-*-*" 1270
+ fail "break at 28" }
-re ".*$gdb_prompt$" { fail "break at 28" }
timeout { fail "break at 28 (timeout)" }
}
timeout { fail "re-run (timeout)" }
}
+#
+# Test that breakpoints-invalid is issued once and only once for
+# breakpoint ignore count changes, after annotation stopped.
+#
+send_gdb "break 46\n"
+gdb_expect {
+ -re "Breakpoint 5 at $hex: file .*$srcfile, line 46.*$gdb_prompt$" {
+ pass "break at 46"
+ }
+ -re ".*$gdb_prompt$" { fail "break at 46" }
+ timeout { fail "break at 46 (timeout)" }
+}
+
+send_gdb "ignore 5 4\n"
+gdb_expect {
+ -re "Will ignore next 4 crossings of breakpoint 5.*$gdb_prompt$" {
+ pass "ignore 5 4"
+ }
+ -re ".*$gdb_prompt$" { fail "ignore 5 4" }
+ timeout { fail "ignore 5 4 (timeout)" }
+}
+
+send_gdb "continue\n"
+gdb_expect {
+ -re ".*$srcfile:46:.*\032\032stopped\r\n\r\n\032\032breakpoints-invalid\r\n$gdb_prompt$" {
+ pass "annotate ignore count change"
+ }
+ -re ".*$gdb_prompt$" { fail "annotate ignore count change" }
+ timeout { fail "annotate ignore count change (timeout)" }
+}
+
+# check that ignore command is working, or the above can provide
+# misleading assurance ...
+
+send_gdb "next\n"
+gdb_expect {
+ -re "$gdb_prompt$" {}
+ timeout { fail "next to exit loop" }
+}
+
+send_gdb "next\n"
+gdb_expect {
+ -re ".*$srcfile:49:.*$gdb_prompt$" {
+ pass "breakpoint ignore count"
+ }
+ -re ".*$gdb_prompt$" { fail "breakpoint ignore count" }
+ timeout { fail "breakpoint ignore count (timeout)" }
+}
#
# Send a signal that is not handled; test:
# FIXME: annotate-signal not tested (requires that the inferior be
# stopped by a "random" signal)
#
+# SIGTRAP signals are dropped before they get to the inferior process
+# on hpux11. In theory, this behaivor can be controlled by setting
+# TTEO_NORM_SIGTRAP in the inferior, but doing so did not cause
+# the signal to be properly delivered.
+#
+# It has been verified that other signals will be delivered. However,
+# rather than twiddle the test, I choose to leave it as-is as it
+# exposes an interesting failure on hpux11.
+setup_xfail hppa*-*-hpux11*
send_gdb "signal SIGTRAP\n"
gdb_expect {
- -re ".*\032\032post-prompt\r\nContinuing with signal SIGTRAP.\r\n\r\n\032\032starting\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032signalled\r\n\r\n\032\032frames-invalid\r\n\r\nProgram terminated with signal \r\n\032\032signal-name\r\nSIGTRAP\r\n\032\032signal-name-end\r\n, \r\n\032\032signal-string\r\nTrace.breakpoint trap\r\n\032\032signal-string-end\r\n.\r\nThe program no longer exists.\r\n\r\n\032\032stopped\r\n$gdb_prompt$" \
+ -re ".*\032\032post-prompt\r\nContinuing with signal SIGTRAP.\r\n\r\n\032\032starting\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032frames-invalid\r\n\r\n\032\032signalled\r\n\r\nProgram terminated with signal \r\n\032\032signal-name\r\nSIGTRAP\r\n\032\032signal-name-end\r\n, \r\n\032\032signal-string\r\nTrace.breakpoint trap\r\n\032\032signal-string-end\r\n.\r\nThe program no longer exists.\r\n\r\n\032\032stopped\r\n$gdb_prompt$" \
{ pass "signal sent" }
-re ".*$gdb_prompt$" { fail "signal sent" }
timeout { fail "signal sent (timeout)" }
}
}
-
# restore the original prompt for the rest of the testsuite
set gdb_prompt $old_gdb_prompt