-# Copyright 1998-2013 Free Software Foundation, Inc.
+# Copyright 1998-2017 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
-set testfile "call-ar-st"
-set srcfile ${testfile}.c
-set binfile ${objdir}/${subdir}/${testfile}
+standard_testfile
-# Test depends on printf, which the sparclet stub doesn't support.
-if { [istarget "sparclet-*-*"] } {
- return 0
-}
-
-if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
- untested "couldn't compile ${srcdir}/${subdir}/${srcfile}"
- return -1
+# Some targets can't call functions, so don't even bother with this
+# test.
+if [target_info exists gdb,cannot_call_functions] {
+ unsupported "this target can not call functions"
+ continue
}
-
# Create and source the file that provides information about the compiler
# used to compile the test case.
return -1
}
-# Some targets can't call functions, so don't even bother with this
-# test.
-if [target_info exists gdb,cannot_call_functions] {
- setup_xfail "*-*-*" 2416
- fail "This target can not call functions"
- continue
+set skip_float_test [gdb_skip_float_test]
+
+if {[prepare_for_testing "failed to prepare" $testfile $srcfile debug]} {
+ return -1
}
+
set oldtimeout $timeout
set timeout [expr "$timeout + 60"]
-# Start with a fresh gdb.
-
-gdb_exit
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
gdb_test_no_output "set print sevenbit-strings"
gdb_test_no_output "set print address off"
gdb_test_no_output "set width 0"
get_debug_format
-#go -until 1209
-gdb_test "tbreak 1209" \
- "Temporary breakpoint \[0-9\]+.*file.*$srcfile, line 1209.*" \
- "tbreakpoint line 1209"
+set stop_line [gdb_get_line_number "-tbreak1-"]
+gdb_test "tbreak $stop_line" \
+ "Temporary breakpoint ${decimal}.*file.*$srcfile, line $stop_line.*" \
+ "tbreakpoint at tbreak1"
gdb_test continue \
-"Continuing\\..*main \\(\\) at.*$srcfile:1209.*" \
+"Continuing\\..*main \\(\\) at.*$srcfile:$stop_line.*" \
"run until breakpoint set at a line"
#call print_double_array(double_array)
-if {![gdb_skip_float_test "print print_double_array(double_array)"] && \
+if {!$skip_float_test && \
![gdb_skip_stdio_test "print print_double_array(double_array)"] } {
- gdb_test_sequence "print print_double_array(double_array)" "" {
- "\[ \t\r\n\]+array_d :"
- "\[ \t\r\n\]+========="
- "\[ \t\r\n\]+0.000000"
- "\[ \t\r\n\]+23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]"
- "\[ \t\r\n\]+"
- }
+
+ gdb_test_stdio "print print_double_array(double_array)" \
+ [multi_line \
+ "array_d :" \
+ "=========" \
+ "" \
+ "0.000000 *" \
+ "23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]"]
}
#call print_char_array(char_array)
+set array_c_re \
+ [multi_line \
+ "array_c :" \
+ "=========" \
+ "" \
+ "Z" \
+ "aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ" \
+ "aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ" \
+ "aZaZaZaZaZaZaZaZaZa"]
+
if ![gdb_skip_stdio_test "print_char_array(char_array)"] {
- gdb_test_sequence "print print_char_array(char_array)" "" {
- "\[ \t\r\n\]+array_c :"
- "\[ \t\r\n\]+========="
- "\[ \t\r\n\]+\[ \t\r\n\]+Z"
- "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
- "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
- "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa\[ \t\r\n\]+\[ \t\r\n\]+"
- }
+ gdb_test_stdio "print print_char_array(char_array)" $array_c_re
}
-#go -until 1216
-gdb_test "tbreak 1216" \
-"Temporary breakpoint.*file.*$srcfile, line 1216.*" \
-"tbreakpoint line 1216"
-
-if ![gdb_skip_stdio_test "continue to 1216"] {
- gdb_test_sequence "continue" "continue to 1216" {
- "\[ \t\r\n\]+array_c :"
- "\[ \t\r\n\]+========="
- "\[ \t\r\n\]+\[ \t\r\n\]+Z"
- "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
- "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
- "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa"
- "\[ \t\r\n\]+main.*at.*:1216"
- "\[ \t\r\n\]+1216.*print_double_array\\(double_array\\)"
- }
+set stop_line [gdb_get_line_number "-tbreak2-"]
+gdb_test "tbreak $stop_line" \
+"Temporary breakpoint.*file.*$srcfile, line $stop_line.*" \
+"tbreakpoint at tbreak2"
+
+if ![gdb_skip_stdio_test "continue to tbreak2"] {
+ set gdb_re \
+ [multi_line \
+ "main.*at.*:\[0-9\]+" \
+ "\[0-9\]+.*print_double_array\\(double_array\\).*"]
+ gdb_test_stdio "continue" $array_c_re $gdb_re "continue to tbreak2"
} else {
gdb_test "continue" ".*" ""
}
# }
#set timeout $oldtimeout
-#go -until 1220
-gdb_test "tbreak 1220" \
- "Temporary breakpoint.* file .*$srcfile, line 1220.*" \
- "tbreakpoint line 1220"
-
-if {![gdb_skip_float_test "continuing to breakpoint 1220"] && \
- ![gdb_skip_stdio_test "continuing to breakpoint 1220"] } {
- gdb_test_sequence "continue" "continuing to breakpoint 1220" {
- "Continuing\\."
- "\[ \t\r\n\]+array_d :"
- "\[ \t\r\n\]+========="
- "\[ \t\r\n\]+0.000000"
- "\[ \t\r\n\]+23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]*"
- "\[ \t\r\n\]+"
- "array_f :"
- "student id :\[\t \]+.*YELLOW"
- "array_i :"
- "main \\(\\) at .*call-ar-st.c:1220\[ \t\r\n\]+.*print_all_arrays\\(integer_array, char_array, float_array, double_array\\)."
- }
+set stop_line [gdb_get_line_number "-tbreak3-"]
+gdb_test "tbreak $stop_line" \
+ "Temporary breakpoint.* file .*$srcfile, line $stop_line.*" \
+ "tbreakpoint at tbreak3"
+
+if {!$skip_float_test && \
+ ![gdb_skip_stdio_test "continuing to tbreak3"] } {
+
+ gdb_test_stdio "continue" \
+ [multi_line \
+ "array_d :" \
+ "=========" \
+ "" \
+ "0.000000 *" \
+ "23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]* *" \
+ "" \
+ "" \
+ "array_f :" \
+ ".*" \
+ "student id :\[\t \]+.*YELLOW" \
+ "array_i :" \
+ ] \
+ "main \\(\\) at .*call-ar-st.c:\[0-9\]+\[ \t\r\n\]+.*print_all_arrays\\(integer_array, char_array, float_array, double_array\\)..*" \
+ "continuing to tbreak3"
+
} else {
gdb_test "continue" ".*" ""
}
#step
+set stop_line [gdb_get_line_number "-step1-"]
gdb_test "step" \
- "print_all_arrays \\(array_i=<integer_array.*>, array_c=<char_array.*> .ZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZa., array_f=<float_array.*>, array_d=<double_array.*>\\) at .*call-ar-st.c:306\[ \t\r\n\]+306.*print_int_array\\(array_i\\);.*" \
+ "print_all_arrays \\(array_i=<integer_array.*>, array_c=<char_array.*> .ZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZa., array_f=<float_array.*>, array_d=<double_array.*>\\) at .*$srcfile:$stop_line\[ \t\r\n\]+$stop_line.*print_int_array\\(array_i\\);.*" \
"step inside print_all_arrays"
#step -over
if ![gdb_skip_stdio_test "next over print_int_array in print_all_arrays"] {
- gdb_test "next" \
- "array_i :.*307.*print_char_array.*" \
+ set stop_line [gdb_get_line_number "-next1-"]
+ gdb_test_stdio "next" \
+ "array_i :" \
+ "$stop_line.*print_char_array.*" \
"next over print_int_array in print-all_arrays"
} else {
gdb_test "next" ".*" ""
}
#call print_double_array(array_d)
-if {![gdb_skip_float_test "print print_double_array(array_d)"] && \
+if {!$skip_float_test && \
![gdb_skip_stdio_test "print print_double_array(array_d)"] } {
- gdb_test_sequence "print print_double_array(array_d)" "" {
- "array_d :"
- "\[ \t\r\n\]+========="
- "\[ \t\r\n\]+\[ \t\r\n\]+0.000000"
- "\[ \t\r\n\]+23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]*"
- "\[ \t\r\n\]+"
- }
+
+ gdb_test_stdio "print print_double_array(array_d)" \
+ [multi_line \
+ "array_d :" \
+ "=========" \
+ "" \
+ "0.000000 *" \
+ "23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]*" \
+ ]
}
-#go -until 1236
-gdb_test "tbreak 1236" \
-"Temporary breakpoint.* file .*$srcfile, line 1236.*" \
-"tbreakpoint line 1236"
-
-if {![gdb_skip_float_test "continuing to 1236"] && \
- ![gdb_skip_stdio_test "continuing to 1236"] } {
- gdb_test_sequence "continue" "continuing to 1236" {
- "Continuing\\..*array_c"
- "array_f"
- "\[ \t\r\n\]+array_d :"
- "\[ \t\r\n\]+========="
- "\[ \t\r\n\]+0.000000"
- "\[ \t\r\n\]+23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]*"
- "\[ \t\r\n\]+.*HELLO WORLD.*main \\(\\) at .*call-ar-st.c:1236.*printf\\(.BYE BYE FOR NOW.n.\\)."
- }
+set stop_line [gdb_get_line_number "-tbreak4-"]
+gdb_test "tbreak $stop_line" \
+"Temporary breakpoint.* file .*$srcfile, line $stop_line.*" \
+"tbreakpoint at tbreak4"
+
+if {!$skip_float_test && \
+ ![gdb_skip_stdio_test "continuing to tbreak4"] } {
+
+ gdb_test_stdio "continue" \
+ [multi_line \
+ "array_d :" \
+ "=========" \
+ "" \
+ "0.000000 *" \
+ "23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]*" \
+ ] \
+ "" \
+ "continuing to tbreak4"
} else {
gdb_test "continue" ".*" ""
}
#call sum_array_print(10, *list1, *list2, *list3, *list4)
if ![gdb_skip_stdio_test "print sum_array_print(...)"] {
- gdb_test "print sum_array_print(10, *list1, *list2, *list3, *list4)" \
- ".*Sum of 4 arrays, by element \\(add in seed as well\\):\[ \t\r\n\]+Seed: 10\[ \t\r\n\]+Element Index . Sum\[ \t\r\n\]+-------------------------\[ \t\r\n\]+.*\[ \t\]+0\[ \t\]+52\[ \t\r\n\]+1\[ \t\]+60\[ \t\r\n\]+2\[ \t\]+68\[ \t\r\n\]+3\[ \t\]+76\[ \t\r\n\]+4\[ \t\]+84\[ \t\r\n\]+5\[ \t\]+92\[ \t\r\n\]+6\[ \t\]+100\[ \t\r\n\]+7\[ \t\]+108\[ \t\r\n\]+8\[ \t\]+116\[ \t\r\n\]+9\[ \t\]+124\[ \t\r\n\]+.*" \
- "print sum_array_print(10, *list1, *list2, *list3, *list4)"
+
+ gdb_test_stdio "print sum_array_print(10, *list1, *list2, *list3, *list4)" \
+ [multi_line \
+ "Sum of 4 arrays, by element \\(add in seed as well\\): " \
+ "" \
+ "Seed: 10" \
+ "Element Index . Sum " \
+ "-------------------------" \
+ ".*" \
+ "\[ \t\]+0\[ \t\]+52" \
+ "\[ \t\]+1\[ \t\]+60" \
+ "\[ \t\]+2\[ \t\]+68" \
+ "\[ \t\]+3\[ \t\]+76" \
+ "\[ \t\]+4\[ \t\]+84" \
+ "\[ \t\]+5\[ \t\]+92" \
+ "\[ \t\]+6\[ \t\]+100" \
+ "\[ \t\]+7\[ \t\]+108" \
+ "\[ \t\]+8\[ \t\]+116" \
+ "\[ \t\]+9\[ \t\]+124" \
+ ]
}
#step over
-if ![gdb_skip_stdio_test "next to 1237"] {
- gdb_test "next" \
- "BYE BYE FOR NOW.*1237.*printf\\(.VERY GREEN GRASS.n.\\);.*" \
- "next to 1237"
+set stop_line [gdb_get_line_number "-next2-"]
+if ![gdb_skip_stdio_test "next to next2"] {
+ gdb_test_stdio "next" \
+ "BYE BYE FOR NOW" \
+ "$stop_line.*printf\\(.VERY GREEN GRASS.n.\\);.*" \
+ "next to next2"
} else {
gdb_test "next" ".*" ""
}
#call print_array_rep(\*list1, \*list2, \*list3)
if ![gdb_skip_stdio_test "print print_array_rep(...)"] {
- gdb_test "print print_array_rep(\*list1, \*list2, \*list3)" \
- "Contents of linked list3:.*" \
- "print print_array_rep(*list1, *list2, *list3)"
+ gdb_test_stdio "print print_array_rep(\*list1, \*list2, \*list3)" \
+ "Contents of linked list3:"
}
-#go -until 1241
-gdb_test "tbreak 1241" \
- "Temporary breakpoint..* file .*$srcfile, line 1241.*" \
- "tbreakpoint line 1241"
+set stop_line [gdb_get_line_number "-tbreak5-"]
+gdb_test "tbreak $stop_line" \
+ "Temporary breakpoint..* file .*$srcfile, line $stop_line.*" \
+ "tbreakpoint at tbreak5"
gdb_test "continue" \
- "main \\(\\) at .*call-ar-st.c:1241\r\n1241\[\t \]+sum_array_print\\(10, \\*list1, \\*list2, \\*list3, \\*list4\\);.*" \
- "continue to 1241"
+ "main \\(\\) at .*$srcfile:$stop_line\r\n$stop_line\[\t \]+sum_array_print\\(10, \\*list1, \\*list2, \\*list3, \\*list4\\);.*" \
+ "continue to tbreak5"
# Run into sum_array_print, and verify that the arguments were passed
# may itself be a bug, but it's not the one we're trying to catch
# here. I've added something to step-test.exp for this.
gdb_test "break sum_array_print" \
- ".*Breakpoint ${decimal}: file .*call-ar-st.c, line.*" \
+ ".*Breakpoint ${decimal}: file .*$srcfile, line.*" \
"set breakpoint in sum_array_print"
gdb_test_no_output "set print frame-arguments all"
gdb_test "continue" \
- ".*Breakpoint ${decimal}, sum_array_print \\(seed=10, linked_list1=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .4, 6, 8, 10, 12, 14, 16, 18, 20, 22., head = 0., linked_list2=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .8, 10, 12, 14, 16, 18, 20, 22, 24, 26., head = 0., linked_list3=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .10, 12, 14, 16, 18, 20, 22, 24, 26, 28., head = 0., linked_list4=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .20, 22, 24, 26, 28, 30, 32, 34, 36, 38., head = 0.\\) at .*call-ar-st.c:1105\[ \t\n\r\]+1105.*printf\\(.Sum of 4 arrays, by element \\(add in seed as well\\).*\\);.*" \
+ ".*Breakpoint ${decimal}, sum_array_print \\(seed=10, linked_list1=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .4, 6, 8, 10, 12, 14, 16, 18, 20, 22., head = 0., linked_list2=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .8, 10, 12, 14, 16, 18, 20, 22, 24, 26., head = 0., linked_list3=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .10, 12, 14, 16, 18, 20, 22, 24, 26, 28., head = 0., linked_list4=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .20, 22, 24, 26, 28, 30, 32, 34, 36, 38., head = 0.\\) at .*$srcfile:${decimal}\[ \t\n\r\]+${decimal}.*printf\\(.Sum of 4 arrays, by element \\(add in seed as well\\).*\\);.*" \
"check args of sum_array_print"
#call print_array_rep(linked_list1, linked_list2, linked_list3)
#}
-#go -until 1281
-gdb_test "tbreak 1281" \
- "Temporary breakpoint.* file .*call-ar-st.c, line 1281.*" \
- "tbreakpoint line 1281"
+set stop_line [gdb_get_line_number "-tbreak6-"]
+gdb_test "tbreak $stop_line" \
+ "Temporary breakpoint.* file .*$srcfile, line $stop_line.*" \
+ "tbreakpoint at tbreak6"
-if ![gdb_skip_stdio_test "continuing to 1281"] {
- gdb_test "continue" \
- "Continuing\\..*Sum of 4 arrays.*Contents of linked list1.*Contents of two_floats_t.*main \\(\\) at .*call-ar-st.c:1281.*c = 0.*" \
- "continue to 1281"
+if ![gdb_skip_stdio_test "continuing to tbreak6"] {
+ gdb_test_stdio "continue" \
+ "Sum of 4 arrays.*Contents of linked list1.*Contents of two_floats_t" \
+ "main \\(\\) at .*$srcfile:$stop_line.*c = 0.*" \
+ "continue to tbreak6"
} else {
gdb_test "continue" ".*" ""
}
# *flags, *flags_combo, *three_char, *five_char,
# *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)
-if {![gdb_skip_float_test "print print_small_structs(...)"] && \
+if {!$skip_float_test && \
![gdb_skip_stdio_test "print print_small_structs(...)"] } {
- gdb_test_sequence "print print_small_structs(*struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)" "print print_small_structs" {
- "\[\t\r\n \]+alpha"
- "\[\t\r\n \]+gamma"
- "\[\t\r\n \]+epsilon"
- "\[\t\r\n \]+alpha"
- "\[\t\r\n \]+gamma"
- "\[\t\r\n \]+epsilon"
- "\[\t\r\n \]+ch1: y[ \t]*ch2: n"
- "\[\t\r\n \]+Contents of three_char_t:"
- "\[\t\r\n \]+a[ \t]*b[ \t]*c"
- "\[\t\r\n \]+Contents of five_char_t:"
- "\[\t\r\n \]+l[ \t]*m[ \t]*n[ \t]*o[ \t]*p"
- "\[\t\r\n \]+Contents of int_char_combo_t:"
- "\[\t\r\n \]+123[ \t]*z"
- "\[\t\r\n \]+Sum of the 4 struct values and seed :"
- "\[\t\r\n \]+52"
- "\[\t\r\n \]+Contents of struct1:"
- "\[\t\r\n \]+6[ \t]*0"
- "\[\t\r\n \]+Contents of struct2:"
- "\[\t\r\n \]+10[ \t]*0"
- "\[\t\r\n \]+Contents of struct3:"
- "\[\t\r\n \]+12[ \t]*0"
- "\[\t\r\n \]+Contents of one_double_t:"
- "\[\t\r\n \]+10.500000"
- "\[\t\r\n \]+Contents of one_double_t:"
- "\[\t\r\n \]+-3.375000"
- "\[\t\r\n \]+Contents of one_double_t:"
- "\[\t\r\n \]+675.093750"
- "\[\t\r\n \]+Contents of two_floats_t:"
- "\[\t\r\n \]+45.234001[ \t]*43.599998"
- "\[\t\r\n \]+Contents of two_floats_t:"
- "\[\t\r\n \]+78.010002[ \t]*122.099998"
- "\[\t\r\n \]+Contents of two_floats_t:"
- "\[\t\r\n \]+-1232.344971[ \t]*-199.210007"
- }
+ gdb_test_stdio "print print_small_structs(*struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)" \
+ [multi_line \
+ "alpha" \
+ "gamma" \
+ "epsilon" \
+ "alpha" \
+ "gamma" \
+ "epsilon" \
+ "ch1: y\[ \t\]*ch2: n" \
+ "Contents of three_char_t: " \
+ "" \
+ "a\[ \t\]*b\[ \t\]*c" \
+ "Contents of five_char_t: " \
+ "" \
+ "l\[ \t\]*m\[ \t\]*n\[ \t\]*o\[ \t\]*p" \
+ "Contents of int_char_combo_t: " \
+ "" \
+ "123\[ \t\]*z" \
+ "Sum of the 4 struct values and seed : " \
+ "" \
+ "\[ \t\]*52" \
+ "Contents of struct1: " \
+ "" \
+ "\[ \t\]*6\[ \t\]*0" \
+ "Contents of struct2: " \
+ "" \
+ "\[ \t\]*10\[ \t\]*0" \
+ "Contents of struct3: " \
+ "" \
+ "\[ \t\]*12\[ \t\]*0" \
+ "Contents of one_double_t: " \
+ "" \
+ "10.500000" \
+ "Contents of one_double_t: " \
+ "" \
+ "-3.375000" \
+ "Contents of one_double_t: " \
+ "" \
+ "675.093750" \
+ "Contents of two_floats_t: " \
+ "" \
+ "\[ \t\]*45.234001\[ \t\]*43.599998" \
+ "Contents of two_floats_t: " \
+ "" \
+ "\[ \t\]*78.010002\[ \t\]*122.099998" \
+ "Contents of two_floats_t: " \
+ "" \
+ "-1232.344971\[ \t\]*-199.210007" \
+ ] \
+ "" \
+ "print print_small_structs"
}
#call compute_with_small_structs(20)
#call print_ten_doubles(123.456, 123.456, -0.12, -1.23, 343434.8, 89.098,
# 3.14, -5678.12345, -0.11111111, 216.97065)
-if {![gdb_skip_float_test "print print_ten_doubles(...)"] && \
+if {!$skip_float_test && \
![gdb_skip_stdio_test "print print_ten_doubles(...)"]} {
- gdb_test_sequence "print print_ten_doubles(123.456, 123.456, -0.12, -1.23, 343434.8, 89.098, 3.14, -5678.12345, -0.11111111, 216.97065)" "print print_ten_doubles" {
- "\[\t\r\n \]+Two Doubles : 123.45\[0-9\]*.*123.45\[0-9\]*"
- "\[\t\r\n \]+Two Doubles : -0.1200\[0-9\]*.*-1.2300\[0-9\]*"
- "\[\t\r\n \]+Two Doubles : 343434.\[0-9\]*.*89.09\[0-9\]*"
- "\[\t\r\n \]+Two Doubles : 3.1400\[0-9\]*.*-5678.123\[0-9\]*"
- "\[\t\r\n \]+Two Doubles : -0.1111\[0-9\]*.*216.97\[0-9\]*"
- }
+ gdb_test_stdio "print print_ten_doubles(123.456, 123.456, -0.12, -1.23, 343434.8, 89.098, 3.14, -5678.12345, -0.11111111, 216.97065)" \
+ [multi_line \
+ "Two Doubles : 123.45\[0-9\]*.*123.45\[0-9\]*" \
+ "Two Doubles : -0.1200\[0-9\]*.*-1.2300\[0-9\]*" \
+ "Two Doubles : 343434.\[0-9\]*.*89.09\[0-9\]*" \
+ "Two Doubles : 3.1400\[0-9\]*.*-5678.123\[0-9\]*" \
+ "Two Doubles : -0.1111\[0-9\]*.*216.97\[0-9\]*" \
+ ]
}
-#go -until 1286
-gdb_test "tbreak 1286" \
- "Temporary breakpoint .* file .*call-ar-st.c, line 1286.*" \
- "tbreakpoint line 1286"
-
-gdb_test continue "Continuing\\..*main \\(.*\\) at.*call-ar-st.c:1286\[\t\r\n \]+1286.*print_long_arg_list \\( a, b, c, d, e, f, .struct1, .struct2, .struct3, .struct4,.*" "continue to 1286"
-
-if { [istarget "hppa*-*-hpux*"] } {
- #
- # NOTE:(FIXME)
- # the aCC demangler cannot demangle the name of a function with >10 args.
- # so I added a .* after the name of the function, to match the
- # incredibly long mangled name
- # (getting aCC's libdemangle.a bundled w/ the system?)
- # DTS CLLbs16994 coulter 990114
- #
- # FIXME: use step for hppa* testing for now
- # guo 990621
- #
- gdb_test "step" \
- "print_long_arg_list.*\\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}, five_char=\{ch1 = 108 \'l\', ch2 = 109 \'m\', ch3 = 110 \'n\', ch4 = 111 \'o\', ch5 = 112 \'p\'\}, int_char_combo=\{int1 = 123, ch1 = 122 \'z\'\}, d1=\{double1 = 10.5\}, d2=\{double1 = -3.375\}, d3=\{double1 = 675.09375\}, f1=\{float1 = 45.2340012, float2 = 43.5999985\}, f2=\{float1 = 78.0100021, float2 = 122.099998\}, f3=\{float1 = -1232.34497, float2 = -199.210007\}\\) at .*${srcfile}:992\[\r\n\]+992\[ \t\]+printf\\(\"double :.*\", a\\);" \
- "step into print_long_arg_list"
-} else {
-
- # We can't just assume that a "step" will get us into
- # print_long_arg_list here,either.
- gdb_test "tbreak print_long_arg_list" \
- "Temporary breakpoint .* file .*call-ar-st.c, line .*" \
- "tbreak in print_long_arg_list after stepping into memcpy"
- # The short match case below handles cases where a buffer
- # overflows or something, and expect can't deal with the full
- # line. Perhaps a more elegant solution exists... -sts 1999-08-17
- if {![gdb_skip_float_test "step into print_long_arg_list"]} {
- gdb_test_multiple "continue" "step into print_long_arg_list" {
- -re ".*print_long_arg_list \\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}, five_char=\{ch1 = 108 \'l\', ch2 = 109 \'m\', ch3 = 110 \'n\', ch4 = 111 \'o\', ch5 = 112 \'p\'\}, int_char_combo=\{int1 = 123, ch1 = 122 \'z\'\}, d1=\{double1 = 10.5\}, d2=\{double1 = -3.375\}, d3=\{double1 = 675.09375\}, f1=\{float1 = 45.2340012, float2 = 43.5999985\}, f2=\{float1 = 78.0100021, float2 = 122.099998\}, f3=\{float1 = -1232.34497, float2 = -199.210007\}\\) at .*${srcfile}:992\[\r\n\]+992\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" {
- pass "step into print_long_arg_list"
- }
- -re ".*print_long_arg_list.*\\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}.*\\) at .*${srcfile}:992\[\r\n\]+992\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" {
- pass "step into print_long_arg_list (short match)"
- }
+set stop_line [gdb_get_line_number "-tbreak7-"]
+gdb_test "tbreak $stop_line" \
+ "Temporary breakpoint .* file .*$srcfile, line $stop_line.*" \
+ "tbreakpoint at tbreak7"
+
+gdb_test continue "Continuing\\..*main \\(.*\\) at.*$srcfile:$stop_line\[\t\r\n \]+$stop_line.*print_long_arg_list \\( a, b, c, d, e, f, .struct1, .struct2, .struct3, .struct4,.*" "continue to tbreak7"
+
+set stop_line [gdb_get_line_number "-step2-"]
+# We can't just assume that a "step" will get us into
+# print_long_arg_list here,either.
+gdb_test "tbreak print_long_arg_list" \
+ "Temporary breakpoint .* file .*$srcfile, line .*" \
+ "tbreak in print_long_arg_list after stepping into memcpy"
+# The short match case below handles cases where a buffer
+# overflows or something, and expect can't deal with the full
+# line. Perhaps a more elegant solution exists... -sts 1999-08-17
+if {!$skip_float_test} {
+ gdb_test_multiple "continue" "step into print_long_arg_list" {
+ -re ".*print_long_arg_list \\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}, five_char=\{ch1 = 108 \'l\', ch2 = 109 \'m\', ch3 = 110 \'n\', ch4 = 111 \'o\', ch5 = 112 \'p\'\}, int_char_combo=\{int1 = 123, ch1 = 122 \'z\'\}, d1=\{double1 = 10.5\}, d2=\{double1 = -3.375\}, d3=\{double1 = 675.09375\}, f1=\{float1 = 45.2340012, float2 = 43.5999985\}, f2=\{float1 = 78.0100021, float2 = 122.099998\}, f3=\{float1 = -1232.34497, float2 = -199.210007\}\\) at .*${srcfile}:$stop_line\[\r\n\]+$stop_line\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" {
+ pass "step into print_long_arg_list"
+ }
+ -re ".*print_long_arg_list.*\\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}.*\\) at .*${srcfile}:$stop_line\[\r\n\]+$stop_line\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" {
+ pass "step into print_long_arg_list (short match)"
}
- } else {
- # If skipping float tests, don't expect anything in arg list.
- gdb_test "continue" \
- "print_long_arg_list \\(.*\\).*" \
- "step into print_long_arg_list"
}
+} else {
+ # If skipping float tests, don't expect anything in arg list.
+ gdb_test "continue" \
+ "print_long_arg_list \\(.*\\).*" \
+ "step into print_long_arg_list"
}
set ws "\[\n\r\t \]+"
# flags_combo, three_char, five_char, int_char_combo,
# d1, d2, d3, f1, f2, f3)
-if {![gdb_skip_float_test "print_small_structs from print_long_arg_list"] && \
+if {!$skip_float_test && \
![gdb_skip_stdio_test "print_small_structs from print_long_arg_list"] } {
# On 32-bit SPARC, some of the args are passed by ref, others by
setup_kfail "gdb/1539" "sparc-*-*"
}
- gdb_test_sequence "print print_small_structs(struct1, struct2, struct3, struct4, flags, flags_combo, three_char, five_char, int_char_combo, d1, d2, d3, f1, f2, f3)" "print print_small_structs from print_long_arg_list" {
- "\[\t\r\n \]+alpha"
- "\[\t\r\n \]+gamma"
- "\[\t\r\n \]+epsilon"
- "\[\t\r\n \]+alpha"
- "\[\t\r\n \]+gamma"
- "\[\t\r\n \]+epsilon"
- "\[\t\r\n \]+ch1: y[ \t]*ch2: n"
- "\[\t\r\n \]+Contents of three_char_t:"
- "\[\t\r\n \]+a\[ \t\]*b\[ \t\]*c"
- "\[\t\r\n \]+Contents of five_char_t:"
- "\[\t\r\n \]+l\[ \t\]*m\[ \t\]*n\[ \t\]*o\[ \t\]*p"
- "\[\t\r\n \]+Contents of int_char_combo_t:"
- "\[\t\r\n \]+123\[ \t\]*z"
- "\[\t\r\n \]+Sum of the 4 struct values and seed :"
- "\[\t\r\n \]+52"
- "\[\t\r\n \]+Contents of struct1:"
- "\[\t\r\n \]+6\[ \t\]*0"
- "\[\t\r\n \]+Contents of struct2:"
- "\[\t\r\n \]+10\[ \t\]*0"
- "\[\t\r\n \]+Contents of struct3:"
- "\[\t\r\n \]+12\[ \t\]*0"
- "\[\t\r\n \]+Contents of one_double_t:"
- "\[\t\r\n \]+10.500000"
- "\[\t\r\n \]+Contents of one_double_t:"
- "\[\t\r\n \]+-3.375000"
- "\[\t\r\n \]+Contents of one_double_t:"
- "\[\t\r\n \]+675.093750"
- "\[\t\r\n \]+Contents of two_floats_t:"
- "\[\t\r\n \]+45.234001\[ \t\]*43.599998"
- "\[\t\r\n \]+Contents of two_floats_t:"
- "\[\t\r\n \]+78.010002\[ \t\]*122.099998"
- "\[\t\r\n \]+Contents of two_floats_t:"
- "\[\t\r\n \]+-1232.344971\[ \t\]*-199.210007"
- }
-}
+ gdb_test_stdio "print print_small_structs(struct1, struct2, struct3, struct4, flags, flags_combo, three_char, five_char, int_char_combo, d1, d2, d3, f1, f2, f3)" \
+ [multi_line \
+ "alpha" \
+ "gamma" \
+ "epsilon" \
+ "alpha" \
+ "gamma" \
+ "epsilon" \
+ "ch1: y\[ \t\]*ch2: n" \
+ "Contents of three_char_t: " \
+ "" \
+ "a\[ \t\]*b\[ \t\]*c" \
+ "Contents of five_char_t: " \
+ "" \
+ "l\[ \t\]*m\[ \t\]*n\[ \t\]*o\[ \t\]*p" \
+ "Contents of int_char_combo_t: " \
+ "" \
+ "123\[ \t\]*z" \
+ "Sum of the 4 struct values and seed : " \
+ "" \
+ "\[ \t\]*52" \
+ "Contents of struct1: " \
+ "" \
+ "\[ \t\]*6\[ \t\]*0" \
+ "Contents of struct2: " \
+ "" \
+ "\[ \t\]*10\[ \t\]*0" \
+ "Contents of struct3: " \
+ "" \
+ "\[ \t\]*12\[ \t\]*0" \
+ "Contents of one_double_t: " \
+ "" \
+ "10.500000" \
+ "Contents of one_double_t: " \
+ "" \
+ "-3.375000" \
+ "Contents of one_double_t: " \
+ "" \
+ "675.093750" \
+ "Contents of two_floats_t: " \
+ "" \
+ "\[ \t\]*45.234001\[ \t\]*43.599998" \
+ "Contents of two_floats_t: " \
+ "" \
+ "\[ \t\]*78.010002\[ \t\]*122.099998" \
+ "Contents of two_floats_t: " \
+ "" \
+ "-1232.344971\[ \t\]*-199.210007" \
+ ] \
+ "" \
+ "print print_small_structs from print_long_arg_list"
+}
-#go -until 1300
-gdb_test "tbreak 1300" \
- "Temporary breakpoint.* file .*call-ar-st.c, line 1300.*" \
- "tbreakpoint line 1300"
+set stop_line [gdb_get_line_number "-tbreak8-"]
+gdb_test "tbreak $stop_line" \
+ "Temporary breakpoint.* file .*$srcfile, line $stop_line.*" \
+ "tbreakpoint at tbreak8"
-if ![gdb_skip_stdio_test "continuing to 1300"] {
- gdb_test "continue" "Continuing\\..*Contents of two_floats_t:.*main \\(\\) at.*call-ar-st.c:1300.*1300.*init_bit_flags_combo\\(flags_combo, \\(unsigned\\)1, \\(unsigned\\)0, .y.,.*" \
- "continue to 1300"
+if ![gdb_skip_stdio_test "continuing to tbreak8"] {
+ gdb_test_stdio "continue" \
+ "Contents of two_floats_t:" \
+ ".*main \\(\\) at.*$srcfile:$stop_line.*$stop_line.*init_bit_flags_combo\\(flags_combo, \\(unsigned\\)1, \\(unsigned\\)0, .y.,.*" \
+ "continue to tbreak8"
} else {
gdb_test "continue" ".*" ""
}
#step
+set stop_line [gdb_get_line_number "-step3-"]
gdb_test "step" \
- "init_bit_flags_combo \\(bit_flags_combo=, a=1, b=0, ch1=121 .y., g=1, d=0, ch2=110 .n., e=1, o=0\\) at .*call-ar-st.c:416\[ \t\n\r\]+416.*bit_flags_combo->alpha = a;" \
+ "init_bit_flags_combo \\(bit_flags_combo=, a=1, b=0, ch1=121 .y., g=1, d=0, ch2=110 .n., e=1, o=0\\) at .*$srcfile:$stop_line\[ \t\n\r\]+$stop_line.*bit_flags_combo->alpha = a;.*" \
"step into init_bit_flags_combo"
#call print_bit_flags_combo(*bit_flags_combo)
-if ![gdb_skip_stdio_test "continuing to 1300"] {
- gdb_test "print print_bit_flags_combo(*bit_flags_combo)" \
- "alpha.*gamma.*epsilon.*ch1: y.*ch2: n.*" \
- "print print_bit_flags_combo from init_bit_flags_combo"
+if ![gdb_skip_stdio_test "continuing at step3"] {
+ gdb_test_stdio "print print_bit_flags_combo(*bit_flags_combo)" \
+ "alpha.*gamma.*epsilon.*ch1: y.*ch2: n"
}
-#go -until 1305
-gdb_test "tbreak 1305" \
- "Temporary breakpoint.* file .*call-ar-st.c, line 1305.*" \
- "tbreakpoint line 1305"
+set stop_line [gdb_get_line_number "-tbreak9-"]
+gdb_test "tbreak $stop_line" \
+ "Temporary breakpoint.* file .*$srcfile, line $stop_line.*" \
+ "tbreakpoint at tbreak9"
-gdb_test continue "Continuing\\..*main \\(\\) at .*call-ar-st.c:1305\[\r\n\t \]+1305.*init_int_char_combo\\(int_char_combo, 13, .!.\\);" \
-"continue to 1305"
+gdb_test continue "Continuing\\..*main \\(\\) at .*$srcfile:$stop_line\[\r\n\t \]+$stop_line.*init_int_char_combo\\(int_char_combo, 13, .!.\\);.*" \
+"continue to tbreak9"
#call print_long_arg_list(a, b, c, d, e, f, *struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)
-# FIXME:
-# HP aCC demangler currently does not handle hp aCC functions with >10 args
-# DTS CLLbs16994 coulter 990114
-
-if {$hp_aCC_compiler} {setup_xfail "hppa*-*-*" CLLbs16994}
-
-if {![gdb_skip_float_test "print print_long_arg_list"] && \
+if {!$skip_float_test && \
![gdb_skip_stdio_test "print print_long_arg_list"] } {
- gdb_test_sequence "print print_long_arg_list(a, b, c, d, e, f, *struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)" "print print_long_arg_list" {
- "\[ \n\r\t\]+double : 22.250000"
- "\[ \n\r\t\]+double : 33.375000"
- "\[ \n\r\t\]+int : 0"
- "\[ \n\r\t\]+int : -25"
- "\[ \n\r\t\]+int : 100"
- "\[ \n\r\t\]+int : 2345"
- "\[ \n\r\t\]+alpha"
- "\[ \n\r\t\]+gamma"
- "\[ \n\r\t\]+epsilon"
- "\[ \n\r\t\]+ch1: y\[ \t\]+ch2: n"
- "\[ \n\r\t\]+Contents of three_char_t:"
- "\[ \n\r\t\]+x\[ \t\]+y\[ \t\]+z"
- "\[ \n\r\t\]+Contents of five_char_t:"
- "\[ \n\r\t\]+h\[ \t\]+e\[ \t\]+l\[ \t\]+l\[ \t\]+o"
- "\[ \n\r\t\]+Contents of int_char_combo_t:"
- "\[ \n\r\t\]+123\[ \t\]+z"
- "\[ \n\r\t\]+Sum of the 4 struct values and seed :"
- "\[ \n\r\t\]+52"
- "\[ \n\r\t\]+Contents of struct1:"
- "\[ \n\r\t\]+6\[ \t\]+0"
- "\[ \n\r\t\]+Contents of struct2:"
- "\[ \n\r\t\]+10\[ \t\]+0"
- "\[ \n\r\t\]+Contents of struct3:"
- "\[ \n\r\t\]+12\[ \t\]+0"
- "\[ \n\r\t\]+Contents of one_double_t:"
- "\[ \n\r\t\]+1.111110"
- "\[ \n\r\t\]+Contents of one_double_t:"
- "\[ \n\r\t\]+-345.340000"
- "\[ \n\r\t\]+Contents of one_double_t:"
- "\[ \n\r\t\]+546464.200000"
- "\[ \n\r\t\]+Contents of two_floats_t:"
- "\[ \n\r\t\]+0.234000\[ \t\]+453.100006"
- "\[ \n\r\t\]+Contents of two_floats_t:"
- "\[ \n\r\t\]+78.345001\[ \t\]+23.090000"
- "\[ \n\r\t\]+Contents of two_floats_t:"
- "\[ \n\r\t\]+-2.345000\[ \t\]+1.000000"
- }
+
+ gdb_test_stdio "print print_long_arg_list(a, b, c, d, e, f, *struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)" \
+ [multi_line \
+ "double : 22.250000" \
+ "double : 33.375000" \
+ "int : 0" \
+ "int : -25" \
+ "int : 100" \
+ "int : 2345" \
+ "alpha" \
+ "gamma" \
+ "epsilon" \
+ "alpha" \
+ "gamma" \
+ "epsilon" \
+ "ch1: y\[ \t\]*ch2: n" \
+ "Contents of three_char_t: " \
+ "" \
+ "x\[ \t\]*y\[ \t\]*z" \
+ "Contents of five_char_t: " \
+ "" \
+ "h\[ \t\]*e\[ \t\]*l\[ \t\]*l\[ \t\]*o" \
+ "Contents of int_char_combo_t: " \
+ "" \
+ "123\[ \t\]*z" \
+ "Sum of the 4 struct values and seed : " \
+ "" \
+ "\[ \t\]*52" \
+ "Contents of struct1: " \
+ "" \
+ "\[ \t\]*6\[ \t\]*0" \
+ "Contents of struct2: " \
+ "" \
+ "\[ \t\]*10\[ \t\]*0" \
+ "Contents of struct3: " \
+ "" \
+ "\[ \t\]*12\[ \t\]*0" \
+ "Contents of one_double_t: " \
+ "" \
+ "1.111110" \
+ "Contents of one_double_t: " \
+ "" \
+ "-345.340000" \
+ "Contents of one_double_t: " \
+ "" \
+ "546464.200000" \
+ "Contents of two_floats_t: " \
+ "" \
+ "0.234000\[ \t\]*453.100006" \
+ "Contents of two_floats_t: " \
+ "" \
+ "78.345001\[ \t\]*23.090000" \
+ "Contents of two_floats_t: " \
+ "" \
+ "-2.345000\[ \t\]*1.000000" \
+ ] \
+ "" \
+ "print print_long_arg_list"
}
-#go -until 1311
-gdb_test "tbreak 1311" \
- "Temporary breakpoint.* file .*call-ar-st.c, line 1311.*" \
- "tbreakpoint line 1311"
+set stop_line [gdb_get_line_number "-tbreak10-"]
+gdb_test "tbreak $stop_line" \
+ "Temporary breakpoint.* file .*$srcfile, line $stop_line.*" \
+ "tbreakpoint at tbreak10"
-gdb_test continue "Continuing\\..*main \\(\\) at .*call-ar-st.c:1311\[ \t\n\r\]+1311.*compute_with_small_structs\\(35\\);" \
-"continue to 1311"
+gdb_test continue "Continuing\\..*main \\(\\) at .*$srcfile:$stop_line\[ \t\n\r\]+$stop_line.*compute_with_small_structs\\(35\\);.*" \
+"continue to tbreak10"
#call sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)
if ![gdb_skip_stdio_test "print sum_struct_print(...)"] {
- gdb_test "print sum_struct_print(10,*struct1,*struct2,*struct3,*struct4)" \
- "Sum of the 4 struct values and seed :\[ \t\n\r\]+218.*" \
- "print sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)"
+ gdb_test_stdio "print sum_struct_print(10,*struct1,*struct2,*struct3,*struct4)" \
+ "Sum of the 4 struct values and seed :\[ \t\n\r\]+218"
}
#call print_struct_rep(*struct1, *struct2, *struct3)
if ![gdb_skip_stdio_test "print print_struct_rep(...)"] {
- gdb_test_sequence "print print_struct_rep(*struct1, *struct2, *struct3)" \
- "print print_struct_rep(*struct1, *struct2, *struct3)" {
- "\[ \t\n\r\]+Contents of struct1:"
- "\[ \t\n\r\]+ 22 0"
- "\[ \t\n\r\]+Contents of struct2:"
- "\[ \t\n\r\]+ 42 0"
- "\[ \t\n\r\]+Contents of struct3:"
- "\[ \t\n\r\]+ 62 0"
- }
+ gdb_test_stdio "print print_struct_rep(*struct1, *struct2, *struct3)" \
+ [multi_line \
+ "Contents of struct1: " \
+ "" \
+ " 22 0" \
+ "Contents of struct2: " \
+ "" \
+ " 42 0" \
+ "Contents of struct3: " \
+ "" \
+ " 62 0" \
+ ]
}
if ![gdb_skip_stdio_test "print print_one_large_struct(...)"] {
- gdb_test "print print_one_large_struct(*list1)" \
- " 4 1.*" \
- "print print_one_large_struct(*list1)"
+ gdb_test_stdio "print print_one_large_struct(*list1)" \
+ " 4 1"
}
set timeout $oldtimeout
projects / deliverable / binutils-gdb.git / blobdiff