-# Copyright (C) 1988, 1990, 1991, 1992 Free Software Foundation, Inc.
+# Copyright 1988, 1990, 1991, 1992, 1994, 1995, 1997, 1998, 1999, 2000,
+# 2001, 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
-#
+#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
-#
+#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-
-# Please email any bugs, comments, and/or additions to this file to:
-# bug-gdb@prep.ai.mit.edu
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
if $tracelevel then {
strace $tracelevel
set prms_id 0
set bug_id 0
-set binfile "run"
-
-if ![file exists $objdir/$subdir/$binfile] then {
- perror "$objdir/$subdir/$binfile does not exist."
- return 0
+set testfile "run"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/commands
+if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-DFAKEARGV}] != "" } {
+ untested commands.exp
+ return -1
}
gdb_exit
gdb_start
delete_breakpoints
gdb_reinitialize_dir $srcdir/$subdir
-gdb_load $objdir/$subdir/$binfile
+gdb_load ${binfile}
proc gdbvar_simple_if_test {} {
- global prompt
+ global gdb_prompt
gdb_test "set \$foo = 0" "" "set foo in gdbvar_simple_if_test"
# All this test should do is print 0xdeadbeef once.
- gdb_test "if \$foo == 1\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" "\\\$\[0-9\]* = 0xdeadbeef" "gdbvar_simple_if_test #1"
+ gdb_test "if \$foo == 1\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" \
+ "\\\$\[0-9\]* = 0xdeadbeef" "gdbvar_simple_if_test #1"
# All this test should do is print 0xfeedface once.
- gdb_test "if \$foo == 0\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" "\\\$\[0-9\]* = 0xfeedface" "gdbvar_simple_if_test #2"
+ gdb_test "if \$foo == 0\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" \
+ "\\\$\[0-9\]* = 0xfeedface" "gdbvar_simple_if_test #2"
}
proc gdbvar_simple_while_test {} {
- global prompt
+ global gdb_prompt
gdb_test "set \$foo = 5" "" "set foo in gdbvar_simple_while_test"
# This test should print 0xfeedface five times.
- gdb_test "while \$foo > 0\np/x 0xfeedface\nset \$foo -= 1\nend" "\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" "gdbvar_simple_while_test #1"
+ gdb_test "while \$foo > 0\np/x 0xfeedface\nset \$foo -= 1\nend" \
+ "\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" \
+ "gdbvar_simple_while_test #1"
}
proc gdbvar_complex_if_while_test {} {
- global prompt
+ global gdb_prompt
gdb_test "set \$foo = 4" "" "set foo in gdbvar complex_if_while_test"
# This test should alternate between 0xdeadbeef and 0xfeedface two times.
- gdb_test "while \$foo > 0\nset \$foo -= 1\nif \(\$foo % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend" "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" "gdbvar_complex_if_while_test #1"
+ gdb_test "while \$foo > 0\nset \$foo -= 1\nif \(\$foo % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend" \
+ "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" \
+ "gdbvar_complex_if_while_test #1"
}
proc progvar_simple_if_test {} {
- global prompt
+ global gdb_prompt
- gdb_test "set args 5" "" "set args in progvar_simple_if_test"
- if { ![runto factorial] } then { return }
+ if [target_info exists noargs] {
+ verbose "Skipping progvar_simple_if_test because of noargs."
+ return
+ }
+
+ if { ![runto factorial] } then { gdb_suppress_tests; }
+ # Don't depend upon argument passing, since most simulators don't
+ # currently support it. Bash value variable to be what we want.
+ gdb_test "p value=5" "" "set value to 5 in progvar_simple_if_test #1"
# All this test should do is print 0xdeadbeef once.
- gdb_test "if value == 1\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" "\\\$\[0-9\]* = 0xdeadbeef" "progvar_simple_if_test #1"
+ gdb_test "if value == 1\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" \
+ "\\\$\[0-9\]* = 0xdeadbeef" \
+ "progvar_simple_if_test #1"
# All this test should do is print 0xfeedface once.
- gdb_test "if value == 5\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" "\\\$\[0-9\]* = 0xfeedface" "progvar_simple_if_test #2"
+ gdb_test "if value == 5\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" \
+ "\\\$\[0-9\]* = 0xfeedface" \
+ "progvar_simple_if_test #2"
+ gdb_stop_suppressing_tests;
}
proc progvar_simple_while_test {} {
- global prompt
+ global gdb_prompt
+
+ if [target_info exists noargs] {
+ verbose "Skipping progvar_simple_while_test because of noargs."
+ return
+ }
gdb_test "set args 5" "" "set args in progvar_simple_while_test"
- if { ![runto factorial] } then { return }
+ if { ![runto factorial] } then { gdb_suppress_tests }
+ # Don't depend upon argument passing, since most simulators don't
+ # currently support it. Bash value variable to be what we want.
+ gdb_test "p value=5" "" "set value to 5 in progvar_simple_if_test #2"
# This test should print 0xfeedface five times.
- gdb_test "while value > 0\np/x 0xfeedface\nset value -= 1\nend" "\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" "progvar_simple_while_test #1"
+ gdb_test "while value > 0\np/x 0xfeedface\nset value -= 1\nend" \
+ "\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" \
+ "progvar_simple_while_test #1"
+ gdb_stop_suppressing_tests;
}
proc progvar_complex_if_while_test {} {
- global prompt
+ global gdb_prompt
+
+ if [target_info exists noargs] {
+ verbose "Skipping progvar_simple_if_while_test because of noargs."
+ return
+ }
gdb_test "set args 4" "" "set args in progvar_complex_if_while_test"
- if { ![runto factorial] } then { return }
+ if { ![runto factorial] } then { gdb_suppress_tests }
+ # Don't depend upon argument passing, since most simulators don't
+ # currently support it. Bash value variable to be what we want.
+ gdb_test "p value=4" "" "set value to 4 in progvar_simple_if_test"
# This test should alternate between 0xdeadbeef and 0xfeedface two times.
- gdb_test "while value > 0\nset value -= 1\nif \(value % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend" "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" "progvar_complex_if_while_test #1"
+ gdb_test "while value > 0\nset value -= 1\nif \(value % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend" \
+ "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" \
+ "progvar_complex_if_while_test #1"
+ gdb_stop_suppressing_tests;
}
proc if_while_breakpoint_command_test {} {
+ if [target_info exists noargs] {
+ verbose "Skipping if_while_breakpoint_command_test because of noargs."
+ return
+ }
+
gdb_test "set args 5" "" "set args in if_while_breakpoint_command_test"
- if { ![runto factorial] } then { return }
+ if { ![runto factorial] } then { gdb_suppress_tests }
+ # Don't depend upon argument passing, since most simulators don't
+ # currently support it. Bash value variable to be what we want.
+ gdb_test "p value=5" "" "set value to 5 in progvar_simple_if_test"
delete_breakpoints
- gdb_test "break factorial" "Breakpoint.*at.*"
+ gdb_test "break factorial" "Breakpoint.*at.*" "break factorial #1"
- send "commands\n"
- expect {
+ send_gdb "commands\n"
+ gdb_expect {
-re "End with" {
pass "commands in if_while_breakpoint_command_test"
}
}
}
# This test should alternate between 0xdeadbeef and 0xfeedface two times.
- gdb_test "while value > 0\nset value -= 1\nif \(value % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend\nend" "" "commands part 2 in if_while_breakpoint_command_test"
- gdb_test "continue" "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" "if_while_breakpoint_command_test #1"
- gdb_test "info break" "while.*set.*if.*p/x.*else.*p/x.*end.*" "info break in if_while_breakpoint_command_test"
+ gdb_test "while value > 0\nset value -= 1\nif \(value % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend\nend" \
+ "" \
+ "commands part 2 in if_while_breakpoint_command_test"
+ gdb_test "continue" \
+ "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" \
+ "if_while_breakpoint_command_test #1"
+ gdb_test "info break" \
+ "while.*set.*if.*p/x.*else.*p/x.*end.*" \
+ "info break in if_while_breakpoint_command_test"
+ gdb_stop_suppressing_tests;
}
# Test that we can run the inferior from breakpoint commands.
+#
+# The expected behavior is that all commands after the first "step"
+# shall be ignored. See the gdb manual, "Break Commands",
+# subsection "Breakpoint command lists".
+
proc infrun_breakpoint_command_test {} {
- gdb_test "set args 6" "" "set args in progvar_simple_while_test"
- if { ![runto factorial] } then { return }
+ if [target_info exists noargs] {
+ verbose "Skipping infrun_breakpoint_command_test because of noargs."
+ return
+ }
+
+ gdb_test "set args 6" "" "set args in infrun_breakpoint_command_test"
+ if { ![runto factorial] } then { gdb_suppress_tests }
+ # Don't depend upon argument passing, since most simulators don't
+ # currently support it. Bash value variable to be what we want.
+ gdb_test "p value=6" "" "set value to 6 in progvar_simple_if_test #1"
delete_breakpoints
gdb_test "break factorial if value == 5" "Breakpoint.*at.*"
- gdb_test "commands\nstep\nstep\nstep\nstep\nbt\nend" \
- "End with.*" "commands in infrun_breakpoint_command_test"
- gdb_test "continue" "Breakpoint \[0-9\]*, factorial \\(value=5\\).*at.*
-\[0-9\]*\[ \]*if \\(value > 1\\) \{.*
-\[0-9\]*\[ \]*value \\*= factorial \\(value - 1\\);.*
-factorial \\(value=4\\) at.*\[0-9\]*\[ \]*if \\(value > 1\\) \{.*
-\[0-9\]*\[ \]*value \\*= factorial \\(value - 1\\);.*
-factorial \\(value=3\\) at .*
-\[0-9\]*\[ \]*if \\(value > 1\\) \{.*
-#0 factorial \\(value=3\\).*
-#1 \[0-9a-fx\]* in factorial \\(value=4\\).*
-#2 \[0-9a-fx\]* in factorial \\(value=5\\).*
-#3 \[0-9a-fx\]* in factorial \\(value=6\\).*
-#4 \[0-9a-fx\]* in main \\(.*\\).*" \
- "continue in infrun_breakpoint_command_test"
+
+# infrun_breakpoint_command_test - This test was broken into two parts
+# to get around a synchronization problem in expect.
+# part1: issue the gdb command "commands"
+# part2: send the list of commands
+ send_gdb "commands\n"
+ gdb_expect {
+ -re "End with" {
+ pass "commands in infrun_breakpoint_command_test #1"
+ }
+ default {
+ fail "(timeout or eof) commands in infrun_breakpoint_command_test"
+ }
+ }
+ gdb_test "step\nstep\nstep\nstep\nend" "" \
+ "commands in infrun_breakpoint_command_test #2"
+
+ gdb_test "continue" \
+ "Continuing.*.*.*Breakpoint \[0-9\]*, factorial \\(value=5\\).*at.*\[0-9\]*\[ \]*if \\(value > 1\\) \{.*\[0-9\]*\[ \]*value \\*= factorial \\(value - 1\\);.*" \
+ "continue in infrun_breakpoint_command_test"
+
+ gdb_stop_suppressing_tests;
+}
+
+proc breakpoint_command_test {} {
+ if [target_info exists noargs] {
+ verbose "Skipping breakpoint_command_test because of noargs."
+ return
+ }
+
+ gdb_test "set args 6" "" "set args in breakpoint_command_test"
+ if { ![runto factorial] } then { gdb_suppress_tests; }
+ # Don't depend upon argument passing, since most simulators don't
+ # currently support it. Bash value variable to be what we want.
+ gdb_test "p value=6" "" "set value to 6 in progvar_simple_if_test #2"
+ delete_breakpoints
+ gdb_test "break factorial" "Breakpoint.*at.*" "break factorial #2"
+ gdb_test "commands\nprintf \"Now the value is %d\\n\", value\nend" \
+ "End with.*" "commands in breakpoint_command_test"
+ gdb_test "continue" \
+ "Breakpoint \[0-9\]*, factorial.*Now the value is 5" \
+ "continue in breakpoint_command_test"
+ gdb_test "print value" " = 5" "print value in breakpoint_command_test"
+ gdb_stop_suppressing_tests;
}
# Test a simple user defined command (with arguments)
proc user_defined_command_test {} {
- global prompt
+ global gdb_prompt
gdb_test "set \$foo = 4" "" "set foo in user_defined_command_test"
- send "define mycommand\n"
- expect {
+ send_gdb "define mycommand\n"
+ gdb_expect {
-re "End with" {
pass "define mycommand in user_defined_command_test"
}
}
}
# This test should alternate between 0xdeadbeef and 0xfeedface two times.
- gdb_test "while \$arg0 > 0\nset \$arg0 -= 1\nif \(\$arg0 % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend\nend" "" "enter commands in user_defined_command_test"
+ gdb_test "while \$arg0 > 0\nset \$arg0 -= 1\nif \(\$arg0 % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend\nend" \
+ "" \
+ "enter commands in user_defined_command_test"
+
+ gdb_test "mycommand \$foo" \
+ "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" \
+ "execute user defined command in user_defined_command_test"
+ gdb_test "show user mycommand" \
+ " while \\\$arg0.*set.* if \\\(\\\$arg0.*p/x.* else\[^\n\].*p/x.* end\[^\n\].* end\[^\n\].*" \
+ "display user command in user_defined_command_test"
+}
+
+proc watchpoint_command_test {} {
+ global noargs
+ global gdb_prompt
+
+ if [target_info exists noargs] {
+ verbose "Skipping watchpoint_command_test because of noargs."
+ return
+ }
+
+ # Disable hardware watchpoints if necessary.
+ if [target_info exists gdb,no_hardware_watchpoints] {
+ gdb_test "set can-use-hw-watchpoints 0" "" ""
+ }
+
+ gdb_test "set args 6" "" "set args in watchpoint_command_test"
+ if { ![runto factorial] } then { return }
+ delete_breakpoints
+
+ # Verify that we can create a watchpoint, and give it a commands
+ # list that continues the inferior. We set the watchpoint on a
+ # local variable, too, so that it self-deletes when the watched
+ # data goes out of scope.
+ #
+ # What should happen is: Each time the watchpoint triggers, it
+ # continues the inferior. Eventually, the watchpoint will self-
+ # delete, when the watched variable is out of scope. But by that
+ # time, the inferior should have exited. GDB shouldn't crash or
+ # anything untoward as a result of this.
+ #
+ set wp_id -1
+
+ send_gdb "watch local_var\n"
+ gdb_expect {
+ -re ".*\[Ww\]atchpoint (\[0-9\]*): local_var.*$gdb_prompt $" {
+ set wp_id $expect_out(1,string)
+ pass "watch local_var"
+ }
+ -re "$gdb_prompt $"\
+ {fail "watch local_var"}
+ timeout {fail "(timeout) watch local_var"}
+ }
+
+ if {$wp_id == -1} {return}
+
+ send_gdb "commands $wp_id\n"
+ gdb_expect {
+ -re "Type commands for when breakpoint $wp_id is hit, one per line.*>" {
+ pass "begin commands on watch"
+ }
+ -re "$gdb_prompt $" {fail "begin commands on watch"}
+ timeout {fail "(timeout) begin commands on watch"}
+ }
+ send_gdb "print value\n"
+ gdb_expect {
+ -re ">" {pass "add print command to watch"}
+ -re "$gdb_prompt $" {fail "add print command to watch"}
+ timeout {fail "(timeout) add print command to watch"}
+ }
+ send_gdb "continue\n"
+ gdb_expect {
+ -re ">" {pass "add continue command to watch"}
+ -re "$gdb_prompt $" {fail "add continue command to watch"}
+ timeout {fail "(timeout) add continue command to watch"}
+ }
+ send_gdb "end\n"
+ gdb_expect {
+ -re "$gdb_prompt $" {pass "end commands on watch"}
+ timeout {fail "(timeout) end commands on watch"}
+ }
+ send_gdb "continue\n"
+ gdb_expect {
+ -re "Continuing.*\[Ww\]atchpoint $wp_id deleted because the program has left the block in.*which its expression is valid.*run.c:(57|82).*$gdb_prompt $" {
+ pass "continue with watch"
+ }
+ -re "$gdb_prompt $" {fail "continue with watch"}
+ timeout {fail "(timeout) continue with watch"}
+ }
+}
+
+proc test_command_prompt_position {} {
+ global gdb_prompt
+
+ if [target_info exists noargs] {
+ verbose "Skipping test_command_prompt_position because of noargs."
+ return
+ }
+
+ if { ![runto factorial] } then { gdb_suppress_tests; }
+ # Don't depend upon argument passing, since most simulators don't
+ # currently support it. Bash value variable to be what we want.
+ delete_breakpoints
+ gdb_test "break factorial" "Breakpoint.*at.*" "break factorial #3"
+ gdb_test "p value=5" "" "set value to 5 in test_command_prompt_position"
+ # All this test should do is print 0xdeadbeef once.
+ gdb_test "if value == 1\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" \
+ "\\\$\[0-9\]* = 0xdeadbeef" \
+ "if test in test_command_prompt_position"
+
+ # Now let's test for the correct position of the '>' in gdb's
+ # prompt for commands. It should be at the beginning of the line,
+ # and not after one space.
+
+ send_gdb "commands\n"
+ gdb_expect {
+ -re "Type commands.*End with.*\[\r\n\]>$" {
+ send_gdb "printf \"Now the value is %d\\n\", value\n"
+ gdb_expect {
+ -re "^printf.*value\r\n>$" {
+ send_gdb "end\n"
+ gdb_expect {
+ -re "^end\r\n$gdb_prompt $" {
+ pass "> OK in test_command_prompt_position"
+ }
+ -re ".*$gdb_prompt $" {
+ fail "some other message in test_command_prompt_position"
+ }
+ timeout {
+ fail "(timeout) 1 in test_command_prompt_position"
+ }
+ }
+ }
+ -re "^ >$" { fail "> not OK in test_command_prompt_position" }
+ -re ".*$gdb_prompt $" {
+ fail "wrong message in test_command_prompt_position"
+ }
+ timeout {
+ fail "(timeout) 2 in test_command_prompt_position "
+ }
+ }
+ }
+ -re "Type commands.*End with.*\[\r\n\] >$" {
+ fail "prompt not OK in test_command_prompt_position"
+ }
+ -re ".*$gdb_prompt $" {
+ fail "commands in test_command_prompt_position"
+ }
+ timeout { fail "(timeout) 3 commands in test_command_prompt_position" }
+ }
- gdb_test "mycommand \$foo" "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" "execute user defined command in user_defined_command_test"
- gdb_test "show user mycommand" "while.*set.*if.*p/x.*else.*p/x.*end.*" "display user command in user_defined_command_test"
+ gdb_stop_suppressing_tests;
+}
+
+
+
+proc deprecated_command_test {} {
+ gdb_test "maintenance deprecate blah" "Can't find command.*" \
+ "tried to deprecate non-existing command"
+
+ gdb_test "maintenance deprecate p \"new_p\"" "" "maintenance deprecate p \"new_p\" /1/"
+ gdb_test "p 5" \
+ "Warning: 'p', an alias for the command 'print' is deprecated.*Use 'new_p'.*" \
+ "p deprecated warning, with replacement"
+ gdb_test "p 5" ".\[0-9\]* = 5.*" "Deprecated warning goes away /1/"
+
+ gdb_test "maintenance deprecate p \"new_p\"" "" "maintenance deprecate p \"new_p\" /2/"
+ gdb_test "maintenance deprecate print \"new_print\"" ""
+ gdb_test "p 5" \
+ "Warning: command 'print' \\(p\\) is deprecated.*Use 'new_print'.*" \
+ "both alias and command are deprecated"
+ gdb_test "p 5" ".\[0-9\]* = 5.*" "Deprecated warning goes away /2/"
+
+ gdb_test "maintenance deprecate set remote memory-read-packet-size \"srm\" " \
+ "" \
+ "deprecate long command /1/"
+ gdb_test "set remote memory-read-packet-size" \
+ "Warning: command 'set remote memory-read-packet-size' is deprecated.*Use 'srm'.*" \
+ "long command deprecated /1/"
+
+ gdb_test "maintenance deprecate set remote memory-read-packet-size" \
+ "" \
+ "deprecate long command /2/"
+ gdb_test "set remote memory-read-packet-size" \
+ "Warning: command 'set remote memory-read-packet-size' is deprecated.*No alternative known.*" \
+ "long command deprecated with no alternative /2/"
+
+ gdb_test "maintenance deprecate" \
+ "\"maintenance deprecate\".*" \
+ "deprecate with no arguments"
+}
+
+proc bp_deleted_in_command_test {} {
+ global gdb_prompt
+
+ if [target_info exists noargs] {
+ verbose "Skipping bp_deleted_in_command_test because of noargs."
+ return
+ }
+
+ gdb_test "set args 1" "" "set args in bp_deleted_in_command_test"
+ delete_breakpoints
+
+ # Create a breakpoint, and associate a command-list to it, with
+ # one command that deletes this breakpoint.
+ gdb_test "break factorial" \
+ "Breakpoint \[0-9\]+ at .*: file .*/run.c, line \[0-9\]+\." \
+ "breakpoint in bp_deleted_in_command_test"
+
+ send_gdb "commands\n"
+ gdb_expect {
+ -re "Type commands for when breakpoint .* is hit, one per line.*>" {
+ pass "begin commands in bp_deleted_in_command_test"
+ }
+ -re "$gdb_prompt $" {fail "begin commands in bp_deleted_in_command_test"}
+ timeout {fail "(timeout) begin commands bp_deleted_in_command_test"}
+ }
+ send_gdb "silent\n"
+ gdb_expect {
+ -re ">" {pass "add silent command"}
+ -re "$gdb_prompt $" {fail "add silent command"}
+ timeout {fail "(timeout) add silent command"}
+ }
+ send_gdb "clear factorial\n"
+ gdb_expect {
+ -re ">" {pass "add clear command"}
+ -re "$gdb_prompt $" {fail "add clear command"}
+ timeout {fail "(timeout) add clear command"} }
+ send_gdb "printf \"factorial command-list executed\\n\"\n"
+ gdb_expect {
+ -re ">" {pass "add printf command"}
+ -re "$gdb_prompt $" {fail "add printf command"}
+ timeout {fail "(timeout) add printf command"}
+ }
+ send_gdb "cont\n"
+ gdb_expect {
+ -re ">" {pass "add cont command"}
+ -re "$gdb_prompt $" {fail "add cont command"}
+ timeout {fail "(timeout) add cont command"} }
+ send_gdb "end\n"
+ gdb_expect {
+ -re "$gdb_prompt $" {pass "end commands"}
+ timeout {fail "(timeout) end commands"}
+ }
+
+ gdb_run_cmd
+ gdb_expect {
+ -re ".*factorial command-list executed.*1.*$gdb_prompt $" {
+ pass "run factorial until breakpoint"
+ }
+ -re ".*$gdb_prompt $" {
+ fail "run factorial until breakpoint"
+ }
+ default { fail "(timeout) run factorial until breakpoint" }
+ timeout { fail "(timeout) run factorial until breakpoint" }
+ }
+}
+
+proc temporary_breakpoint_commands {} {
+ global gdb_prompt
+
+ if [target_info exists noargs] {
+ verbose "Skipping temporary_breakpoint_commands because of noargs."
+ return
+ }
+
+ gdb_test "set args 1" "" "set args in temporary_breakpoint_commands"
+ delete_breakpoints
+
+ # Create a temporary breakpoint, and associate a commands list to it.
+ # This test will verify that this commands list is executed when the
+ # breakpoint is hit.
+ gdb_test "tbreak factorial" \
+ "Temporary breakpoint \[0-9\]+ at .*: file .*/run.c, line \[0-9\]+\." \
+ "breakpoint in temporary_breakpoint_commands"
+
+ send_gdb "commands\n"
+ gdb_expect {
+ -re "Type commands for when breakpoint .* is hit, one per line.*>" {
+ pass "begin commands in bp_deleted_in_command_test"
+ }
+ -re "$gdb_prompt $" {fail "begin commands in bp_deleted_in_command_test"}
+ timeout {fail "(timeout) begin commands bp_deleted_in_command_test"}
+ }
+ send_gdb "silent\n"
+ gdb_expect {
+ -re ">" {pass "add silent tbreak command"}
+ -re "$gdb_prompt $" {fail "add silent tbreak command"}
+ timeout {fail "(timeout) add silent tbreak command"}
+ }
+ send_gdb "printf \"factorial tbreak commands executed\\n\"\n"
+ gdb_expect {
+ -re ">" {pass "add printf tbreak command"}
+ -re "$gdb_prompt $" {fail "add printf tbreak command"}
+ timeout {fail "(timeout) add printf tbreak command"}
+ }
+ send_gdb "cont\n"
+ gdb_expect {
+ -re ">" {pass "add cont tbreak command"}
+ -re "$gdb_prompt $" {fail "add cont tbreak command"}
+ timeout {fail "(timeout) add cont tbreak command"} }
+ send_gdb "end\n"
+ gdb_expect {
+ -re "$gdb_prompt $" {pass "end tbreak commands"}
+ timeout {fail "(timeout) end tbreak commands"}
+ }
+
+ gdb_run_cmd
+ gdb_expect {
+ -re ".*factorial tbreak commands executed.*1.*$gdb_prompt $" {
+ pass "run factorial until temporary breakpoint"
+ }
+ timeout { fail "(timeout) run factorial until temporary breakpoint" }
+ }
+}
+
+# Test that GDB can handle $arg0 outside of user functions without
+# crashing.
+proc stray_arg0_test { } {
+ gdb_test "print \$arg0" \
+ "\\\$\[0-9\]* = void" \
+ "stray_arg0_test #1"
+
+ gdb_test "if 1 == 1\nprint \$arg0\nend" \
+ "\\\$\[0-9\]* = void" \
+ "stray_arg0_test #2"
+
+ gdb_test "print \$arg0 = 1" \
+ "\\\$\[0-9\]* = 1" \
+ "stray_arg0_test #3"
+
+ gdb_test "print \$arg0" \
+ "\\\$\[0-9\]* = 1" \
+ "stray_arg0_test #4"
+}
+
+# Test that GDB can handle arguments when sourcing files recursively.
+# If the arguments are overwritten with ####### then the test has failed.
+proc recursive_source_test {} {
+ set fd [open "file1" w]
+ puts $fd \
+{source file2
+abcdef qwerty}
+ close $fd
+
+ set fd [open "file2" w]
+ puts $fd \
+{define abcdef
+ echo 1: <<<$arg0>>>\n
+ source file3
+ echo 2: <<<$arg0>>>\n
+end}
+ close $fd
+
+ set fd [open "file3" w]
+ puts $fd \
+"echo in file3\\n
+#################################################################"
+ close $fd
+
+ gdb_test "source file1" \
+ "1: <<<qwerty>>>\[\r\n]+in file3\[\r\n]+2: <<<qwerty>>>" \
+ "recursive source test"
+
+ file delete file1
+ file delete file2
+ file delete file3
+}
+
+proc gdb_test_no_prompt { command result msg } {
+ global gdb_prompt
+
+ set msg "$command - $msg"
+ set result "^[string_to_regexp $command]\r\n$result$"
+ gdb_test_multiple $command $msg {
+ -re "$result" {
+ pass $msg
+ return 1
+ }
+ -re "\r\n *>$" {
+ fail $msg
+ return 0
+ }
+ }
+ return 0
+}
+
+proc if_commands_test {} {
+ global gdb_prompt
+
+ gdb_test "set \$tem = 1" "" "set \$tem in if_commands_test"
+
+ set test "if_commands_test 1"
+ gdb_test_no_prompt "if \$tem == 2" { >} $test
+ gdb_test_no_prompt "break main" { >} $test
+ gdb_test_no_prompt "else" { >} $test
+ gdb_test_no_prompt "break factorial" { >} $test
+ gdb_test_no_prompt "commands" { >} $test
+ gdb_test_no_prompt "silent" { >} $test
+ gdb_test_no_prompt "set \$tem = 3" { >} $test
+ gdb_test_no_prompt "continue" { >} $test
+ gdb_test_multiple "end" "first end - $test" {
+ -re " >\$" {
+ pass "first end - $test"
+ }
+ -re "\r\n>\$" {
+ fail "first end - $test"
+ }
+ }
+ gdb_test_multiple "end" "second end - $test" {
+ -re "Breakpoint \[0-9\]+ at .*: file .*/run.c, line \[0-9\]+\.\r\n$gdb_prompt $" {
+ pass "second end - $test"
+ }
+ -re "Undefined command: \"silent\".*$gdb_prompt $" {
+ fail "second end - $test"
+ }
+ }
+
+ set test "if_commands_test 2"
+ gdb_test_no_prompt "if \$tem == 1" { >} $test
+ gdb_test_no_prompt "break main" { >} $test
+ gdb_test_no_prompt "else" { >} $test
+ gdb_test_no_prompt "break factorial" { >} $test
+ gdb_test_no_prompt "commands" { >} $test
+ gdb_test_no_prompt "silent" { >} $test
+ gdb_test_no_prompt "set \$tem = 3" { >} $test
+ gdb_test_no_prompt "continue" { >} $test
+ gdb_test_multiple "end" "first end - $test" {
+ -re " >\$" {
+ pass "first end - $test"
+ }
+ -re "\r\n>\$" {
+ fail "first end - $test"
+ }
+ }
+ gdb_test_multiple "end" "second end - $test" {
+ -re "Breakpoint \[0-9\]+ at .*: file .*/run.c, line \[0-9\]+\.\r\n$gdb_prompt $" {
+ pass "second end - $test"
+ }
+ }
}
gdbvar_simple_if_test
progvar_complex_if_while_test
if_while_breakpoint_command_test
infrun_breakpoint_command_test
+breakpoint_command_test
user_defined_command_test
+watchpoint_command_test
+test_command_prompt_position
+deprecated_command_test
+bp_deleted_in_command_test
+temporary_breakpoint_commands
+stray_arg0_test
+recursive_source_test
+if_commands_test