-# Copyright (C) 1988, 1990, 1991, 1992, 1997 Free Software Foundation, Inc.
+# Copyright 1988, 1990, 1991, 1992, 1994, 1995, 1997, 1998, 1999, 2000,
+# 2001, 2002, 2003 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
gdb_test "set \$foo = 0" "" "set foo in gdbvar_simple_if_test"
# All this test should do is print 0xdeadbeef once.
- gdb_test "if \$foo == 1\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" "\\\$\[0-9\]* = 0xdeadbeef" "gdbvar_simple_if_test #1"
+ gdb_test "if \$foo == 1\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" \
+ "\\\$\[0-9\]* = 0xdeadbeef" "gdbvar_simple_if_test #1"
# All this test should do is print 0xfeedface once.
- gdb_test "if \$foo == 0\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" "\\\$\[0-9\]* = 0xfeedface" "gdbvar_simple_if_test #2"
+ gdb_test "if \$foo == 0\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" \
+ "\\\$\[0-9\]* = 0xfeedface" "gdbvar_simple_if_test #2"
}
proc gdbvar_simple_while_test {} {
gdb_test "set \$foo = 5" "" "set foo in gdbvar_simple_while_test"
# This test should print 0xfeedface five times.
- gdb_test "while \$foo > 0\np/x 0xfeedface\nset \$foo -= 1\nend" "\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" "gdbvar_simple_while_test #1"
+ gdb_test "while \$foo > 0\np/x 0xfeedface\nset \$foo -= 1\nend" \
+ "\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" \
+ "gdbvar_simple_while_test #1"
}
proc gdbvar_complex_if_while_test {} {
gdb_test "set \$foo = 4" "" "set foo in gdbvar complex_if_while_test"
# This test should alternate between 0xdeadbeef and 0xfeedface two times.
- gdb_test "while \$foo > 0\nset \$foo -= 1\nif \(\$foo % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend" "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" "gdbvar_complex_if_while_test #1"
+ gdb_test "while \$foo > 0\nset \$foo -= 1\nif \(\$foo % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend" \
+ "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" \
+ "gdbvar_complex_if_while_test #1"
}
proc progvar_simple_if_test {} {
}
if { ![runto factorial] } then { gdb_suppress_tests; }
- # Don't depend upon argument passing, since most simulators don't currently
- # support it. Bash value variable to be what we want.
+ # Don't depend upon argument passing, since most simulators don't
+ # currently support it. Bash value variable to be what we want.
gdb_test "p value=5" "" "set value to 5 in progvar_simple_if_test #1"
# All this test should do is print 0xdeadbeef once.
- gdb_test "if value == 1\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" "\\\$\[0-9\]* = 0xdeadbeef" "progvar_simple_if_test #1"
+ gdb_test "if value == 1\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" \
+ "\\\$\[0-9\]* = 0xdeadbeef" \
+ "progvar_simple_if_test #1"
# All this test should do is print 0xfeedface once.
- gdb_test "if value == 5\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" "\\\$\[0-9\]* = 0xfeedface" "progvar_simple_if_test #2"
+ gdb_test "if value == 5\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" \
+ "\\\$\[0-9\]* = 0xfeedface" \
+ "progvar_simple_if_test #2"
gdb_stop_suppressing_tests;
}
gdb_test "set args 5" "" "set args in progvar_simple_while_test"
if { ![runto factorial] } then { gdb_suppress_tests }
- # Don't depend upon argument passing, since most simulators don't currently
- # support it. Bash value variable to be what we want.
+ # Don't depend upon argument passing, since most simulators don't
+ # currently support it. Bash value variable to be what we want.
gdb_test "p value=5" "" "set value to 5 in progvar_simple_if_test #2"
# This test should print 0xfeedface five times.
- gdb_test "while value > 0\np/x 0xfeedface\nset value -= 1\nend" "\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" "progvar_simple_while_test #1"
+ gdb_test "while value > 0\np/x 0xfeedface\nset value -= 1\nend" \
+ "\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" \
+ "progvar_simple_while_test #1"
gdb_stop_suppressing_tests;
}
gdb_test "set args 4" "" "set args in progvar_complex_if_while_test"
if { ![runto factorial] } then { gdb_suppress_tests }
- # Don't depend upon argument passing, since most simulators don't currently
- # support it. Bash value variable to be what we want.
+ # Don't depend upon argument passing, since most simulators don't
+ # currently support it. Bash value variable to be what we want.
gdb_test "p value=4" "" "set value to 4 in progvar_simple_if_test"
# This test should alternate between 0xdeadbeef and 0xfeedface two times.
- gdb_test "while value > 0\nset value -= 1\nif \(value % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend" "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" "progvar_complex_if_while_test #1"
+ gdb_test "while value > 0\nset value -= 1\nif \(value % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend" \
+ "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" \
+ "progvar_complex_if_while_test #1"
gdb_stop_suppressing_tests;
}
gdb_test "set args 5" "" "set args in if_while_breakpoint_command_test"
if { ![runto factorial] } then { gdb_suppress_tests }
- # Don't depend upon argument passing, since most simulators don't currently
- # support it. Bash value variable to be what we want.
+ # Don't depend upon argument passing, since most simulators don't
+ # currently support it. Bash value variable to be what we want.
gdb_test "p value=5" "" "set value to 5 in progvar_simple_if_test"
delete_breakpoints
gdb_test "break factorial" "Breakpoint.*at.*" "break factorial #1"
}
}
# This test should alternate between 0xdeadbeef and 0xfeedface two times.
- gdb_test "while value > 0\nset value -= 1\nif \(value % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend\nend" "" "commands part 2 in if_while_breakpoint_command_test"
- gdb_test "continue" "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" "if_while_breakpoint_command_test #1"
- gdb_test "info break" "while.*set.*if.*p/x.*else.*p/x.*end.*" "info break in if_while_breakpoint_command_test"
+ gdb_test "while value > 0\nset value -= 1\nif \(value % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend\nend" \
+ "" \
+ "commands part 2 in if_while_breakpoint_command_test"
+ gdb_test "continue" \
+ "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" \
+ "if_while_breakpoint_command_test #1"
+ gdb_test "info break" \
+ "while.*set.*if.*p/x.*else.*p/x.*end.*" \
+ "info break in if_while_breakpoint_command_test"
gdb_stop_suppressing_tests;
}
# Test that we can run the inferior from breakpoint commands.
+#
+# The expected behavior is that all commands after the first "step"
+# shall be ignored. See the gdb manual, "Break Commands",
+# subsection "Breakpoint command lists".
+
proc infrun_breakpoint_command_test {} {
if [target_info exists noargs] {
verbose "Skipping infrun_breakpoint_command_test because of noargs."
return
}
- gdb_test "set args 6" "" "set args in progvar_simple_while_test"
+ gdb_test "set args 6" "" "set args in infrun_breakpoint_command_test"
if { ![runto factorial] } then { gdb_suppress_tests }
- # Don't depend upon argument passing, since most simulators don't currently
- # support it. Bash value variable to be what we want.
+ # Don't depend upon argument passing, since most simulators don't
+ # currently support it. Bash value variable to be what we want.
gdb_test "p value=6" "" "set value to 6 in progvar_simple_if_test #1"
delete_breakpoints
gdb_test "break factorial if value == 5" "Breakpoint.*at.*"
fail "(timeout or eof) commands in infrun_breakpoint_command_test"
}
}
- gdb_test "step\nstep\nstep\nstep\nbt\nend" "" \
+ gdb_test "step\nstep\nstep\nstep\nend" "" \
"commands in infrun_breakpoint_command_test #2"
- if { [istarget "hppa*-hp-hpux*"] } {
gdb_test "continue" \
- "Continuing.*.*.*Breakpoint \[0-9\]*, factorial \\(value=5\\).*at.*\[0-9\]*\[ \]*if \\(value > 1\\) \{.*\[0-9\]*\[ \]*value \\*= factorial \\(value - 1\\);.*" \
- "continue in infrun_breakpoint_command_test"
- } else {
- gdb_test "continue" \
- "Breakpoint \[0-9\]*, factorial \\(value=5\\).*at.*
-\[0-9\]*\[ \]*if \\(value > 1\\) \{.*
-\[0-9\]*\[ \]*value \\*= factorial \\(value - 1\\);.*
-factorial \\(value=4\\) at.*\[0-9\]*\[ \]*if \\(value > 1\\) \{.*
-\[0-9\]*\[ \]*value \\*= factorial \\(value - 1\\);.*
-factorial \\(value=3\\) at .*
-\[0-9\]*\[ \]*if \\(value > 1\\) \{.*
-#0 factorial \\(value=3\\).*
-#1 \[0-9a-fx\]* in factorial \\(value=4\\).*
-#2 \[0-9a-fx\]* in factorial \\(value=5\\).*
-#3 \[0-9a-fx\]* in factorial \\(value=6\\).*
-#4 \[0-9a-fx\]* in main \\(.*\\).*" \
- "continue in infrun_breakpoint_command_test";
- }
+ "Continuing.*.*.*Breakpoint \[0-9\]*, factorial \\(value=5\\).*at.*\[0-9\]*\[ \]*if \\(value > 1\\) \{.*\[0-9\]*\[ \]*value \\*= factorial \\(value - 1\\);.*" \
+ "continue in infrun_breakpoint_command_test"
gdb_stop_suppressing_tests;
}
gdb_test "set args 6" "" "set args in breakpoint_command_test"
if { ![runto factorial] } then { gdb_suppress_tests; }
- # Don't depend upon argument passing, since most simulators don't currently
- # support it. Bash value variable to be what we want.
+ # Don't depend upon argument passing, since most simulators don't
+ # currently support it. Bash value variable to be what we want.
gdb_test "p value=6" "" "set value to 6 in progvar_simple_if_test #2"
delete_breakpoints
gdb_test "break factorial" "Breakpoint.*at.*" "break factorial #2"
gdb_test "commands\nprintf \"Now the value is %d\\n\", value\nend" \
"End with.*" "commands in breakpoint_command_test"
- gdb_test "continue" "Breakpoint \[0-9\]*, factorial.*Now the value is 5" \
+ gdb_test "continue" \
+ "Breakpoint \[0-9\]*, factorial.*Now the value is 5" \
"continue in breakpoint_command_test"
gdb_test "print value" " = 5" "print value in breakpoint_command_test"
gdb_stop_suppressing_tests;
}
}
# This test should alternate between 0xdeadbeef and 0xfeedface two times.
- gdb_test "while \$arg0 > 0\nset \$arg0 -= 1\nif \(\$arg0 % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend\nend" "" "enter commands in user_defined_command_test"
-
- gdb_test "mycommand \$foo" "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" "execute user defined command in user_defined_command_test"
- gdb_test "show user mycommand" "while.*set.*if.*p/x.*else.*p/x.*end.*" "display user command in user_defined_command_test"
+ gdb_test "while \$arg0 > 0\nset \$arg0 -= 1\nif \(\$arg0 % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend\nend" \
+ "" \
+ "enter commands in user_defined_command_test"
+
+ gdb_test "mycommand \$foo" \
+ "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" \
+ "execute user defined command in user_defined_command_test"
+ gdb_test "show user mycommand" \
+ " while \\\$arg0.*set.* if \\\(\\\$arg0.*p/x.* else\[^\n\].*p/x.* end\[^\n\].* end\[^\n\].*" \
+ "display user command in user_defined_command_test"
}
proc watchpoint_command_test {} {
send_gdb "commands $wp_id\n"
gdb_expect {
- -re "Type commands for when breakpoint $wp_id is hit, one per line.*>"\
- {pass "begin commands on watch"}
- -re "$gdb_prompt $"\
- {fail "begin commands on watch"}
- timeout {fail "(timeout) begin commands on watch"}
+ -re "Type commands for when breakpoint $wp_id is hit, one per line.*>" {
+ pass "begin commands on watch"
+ }
+ -re "$gdb_prompt $" {fail "begin commands on watch"}
+ timeout {fail "(timeout) begin commands on watch"}
}
send_gdb "print value\n"
gdb_expect {
- -re ">"\
- {pass "add print command to watch"}
- -re "$gdb_prompt $"\
- {fail "add print command to watch"}
- timeout {fail "(timeout) add print command to watch"}
+ -re ">" {pass "add print command to watch"}
+ -re "$gdb_prompt $" {fail "add print command to watch"}
+ timeout {fail "(timeout) add print command to watch"}
}
send_gdb "continue\n"
gdb_expect {
- -re ">"\
- {pass "add continue command to watch"}
- -re "$gdb_prompt $"\
- {fail "add continue command to watch"}
- timeout {fail "(timeout) add continue command to watch"}
+ -re ">" {pass "add continue command to watch"}
+ -re "$gdb_prompt $" {fail "add continue command to watch"}
+ timeout {fail "(timeout) add continue command to watch"}
}
send_gdb "end\n"
gdb_expect {
- -re "$gdb_prompt $"\
- {pass "begin commands on watch"}
- timeout {fail "(timeout) begin commands on watch"}
+ -re "$gdb_prompt $" {pass "end commands on watch"}
+ timeout {fail "(timeout) end commands on watch"}
}
send_gdb "continue\n"
gdb_expect {
- -re "Continuing.*\[Ww\]atchpoint $wp_id deleted because the program has left the block in.*which its expression is valid.*run.c:57.*$gdb_prompt $"\
- {pass "continue with watch"}
- -re "$gdb_prompt $"\
- {fail "continue with watch"}
- timeout {fail "(timeout) continue with watch"}
+ -re "Continuing.*\[Ww\]atchpoint $wp_id deleted because the program has left the block in.*which its expression is valid.*run.c:57.*$gdb_prompt $" {
+ pass "continue with watch"
+ }
+ -re "$gdb_prompt $" {fail "continue with watch"}
+ timeout {fail "(timeout) continue with watch"}
}
}
}
if { ![runto factorial] } then { gdb_suppress_tests; }
- # Don't depend upon argument passing, since most simulators don't currently
- # support it. Bash value variable to be what we want.
+ # Don't depend upon argument passing, since most simulators don't
+ # currently support it. Bash value variable to be what we want.
delete_breakpoints
- gdb_test "break factorial" "Breakpoint.*at.*" "break factorial #2"
+ gdb_test "break factorial" "Breakpoint.*at.*" "break factorial #3"
gdb_test "p value=5" "" "set value to 5 in test_command_prompt_position"
# All this test should do is print 0xdeadbeef once.
- gdb_test "if value == 1\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" "\\\$\[0-9\]* = 0xdeadbeef" "if test in test_command_prompt_position"
-
-# Now let's test for the correct position of the '>' in gdb's prompt for commands.
-# It should be at the beginning of the line, and not after one space.
+ gdb_test "if value == 1\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" \
+ "\\\$\[0-9\]* = 0xdeadbeef" \
+ "if test in test_command_prompt_position"
+
+ # Now let's test for the correct position of the '>' in gdb's
+ # prompt for commands. It should be at the beginning of the line,
+ # and not after one space.
send_gdb "commands\n"
gdb_expect {
- -re "Type commands.*End with.*\[\r\n\]>$" \
- { send_gdb "printf \"Now the value is %d\\n\", value\n"
- gdb_expect {
- -re "^printf.*value\r\n>$" \
- { send_gdb "end\n"
- gdb_expect {
- -re "^end\r\n$gdb_prompt $" { pass "> OK in test_command_prompt_position" }
- -re ".*$gdb_prompt $" { fail "some other message in test_command_prompt_position" }
- timeout { fail "(timeout) 1 in test_command_prompt_position" }
- }
- }
- -re "^ >$" { fail "> not OK in test_command_prompt_position" }
- -re ".*$gdb_prompt $" { fail "wrong message in test_command_prompt_position" }
- timeout { fail "(timeout) 2 in test_command_prompt_position " }
- }
- }
- -re "Type commands.*End with.*\[\r\n\] >$" { fail "prompt not OK in test_command_prompt_position" }
- -re ".*$gdb_prompt $" { fail "commands in test_command_prompt_position" }
- timeout { fail "(timeout) 3 commands in test_command_prompt_position" }
+ -re "Type commands.*End with.*\[\r\n\]>$" {
+ send_gdb "printf \"Now the value is %d\\n\", value\n"
+ gdb_expect {
+ -re "^printf.*value\r\n>$" {
+ send_gdb "end\n"
+ gdb_expect {
+ -re "^end\r\n$gdb_prompt $" {
+ pass "> OK in test_command_prompt_position"
+ }
+ -re ".*$gdb_prompt $" {
+ fail "some other message in test_command_prompt_position"
+ }
+ timeout {
+ fail "(timeout) 1 in test_command_prompt_position"
+ }
+ }
+ }
+ -re "^ >$" { fail "> not OK in test_command_prompt_position" }
+ -re ".*$gdb_prompt $" {
+ fail "wrong message in test_command_prompt_position"
+ }
+ timeout {
+ fail "(timeout) 2 in test_command_prompt_position "
+ }
+ }
+ }
+ -re "Type commands.*End with.*\[\r\n\] >$" {
+ fail "prompt not OK in test_command_prompt_position"
}
+ -re ".*$gdb_prompt $" {
+ fail "commands in test_command_prompt_position"
+ }
+ timeout { fail "(timeout) 3 commands in test_command_prompt_position" }
+ }
gdb_stop_suppressing_tests;
}
proc deprecated_command_test {} {
-
-
gdb_test "maintenance deprecate blah" "Can't find command.*" \
- "tried to deprecate non-existsing command"
+ "tried to deprecate non-existing command"
- gdb_test "maintenance deprecate p \"new_p\"" ""
- gdb_test "p 5" "Warning: 'p', an alias for the command 'print' is deprecated.*Use 'new_p'.*" "p deprecated warning, with replacement"
- gdb_test "p 5" ".\[0-9\]* = 5.*" "Deprecated warning goes away"
+ gdb_test "maintenance deprecate p \"new_p\"" "" "maintenance deprecate p \"new_p\" /1/"
+ gdb_test "p 5" \
+ "Warning: 'p', an alias for the command 'print' is deprecated.*Use 'new_p'.*" \
+ "p deprecated warning, with replacement"
+ gdb_test "p 5" ".\[0-9\]* = 5.*" "Deprecated warning goes away /1/"
- gdb_test "maintenance deprecate p \"new_p\"" ""
+ gdb_test "maintenance deprecate p \"new_p\"" "" "maintenance deprecate p \"new_p\" /2/"
gdb_test "maintenance deprecate print \"new_print\"" ""
- gdb_test "p 5" "Warning: command 'print' \\(p\\) is deprecated.*Use 'new_print'.*" "both alias and command are deprecated"
- gdb_test "p 5" ".\[0-9\]* = 5.*" "Deprecated warning goes away"
+ gdb_test "p 5" \
+ "Warning: command 'print' \\(p\\) is deprecated.*Use 'new_print'.*" \
+ "both alias and command are deprecated"
+ gdb_test "p 5" ".\[0-9\]* = 5.*" "Deprecated warning goes away /2/"
+
+ gdb_test "maintenance deprecate set remote memory-read-packet-size \"srm\" " \
+ "" \
+ "deprecate long command /1/"
+ gdb_test "set remote memory-read-packet-size" \
+ "Warning: command 'set remote memory-read-packet-size' is deprecated.*Use 'srm'.*" \
+ "long command deprecated /1/"
+
+ gdb_test "maintenance deprecate set remote memory-read-packet-size" \
+ "" \
+ "deprecate long command /2/"
+ gdb_test "set remote memory-read-packet-size" \
+ "Warning: command 'set remote memory-read-packet-size' is deprecated.*No alternative known.*" \
+ "long command deprecated with no alternative /2/"
+
+ gdb_test "maintenance deprecate" \
+ "\"maintenance deprecate\".*" \
+ "deprecate with no arguments"
+}
- gdb_test "maintenance deprecate set remote memory-read-packet-size \"srm\" " "" "deprecate long comamnd"
- gdb_test "set remote memory-read-packet-size" "Warning: command 'set remote memory-read-packet-size' is deprecated.*Use 'srm'.*" "long command deprecated"
+proc bp_deleted_in_command_test {} {
+ global gdb_prompt
+
+ if [target_info exists noargs] {
+ verbose "Skipping bp_deleted_in_command_test because of noargs."
+ return
+ }
- gdb_test "maintenance deprecate set remote memory-read-packet-size" "" "deprecate long comamnd"
- gdb_test "set remote memory-read-packet-size" "Warning: command 'set remote memory-read-packet-size' is deprecated.*No alternative known.*" "long command deprecated with no alternative."
+ gdb_test "set args 1" "" "set args in bp_deleted_in_command_test"
+ delete_breakpoints
- gdb_test "maintenance deprecate" "\"maintenance deprecate\".*" "deprecate with no arguments"
+ # Create a breakpoint, and associate a command-list to it, with
+ # one command that deletes this breakpoint.
+ gdb_test "break factorial" \
+ "Breakpoint \[0-9\]+ at .*: file .*/run.c, line \[0-9\]+\." \
+ "breakpoint in bp_deleted_in_command_test"
+
+ send_gdb "commands\n"
+ gdb_expect {
+ -re "Type commands for when breakpoint .* is hit, one per line.*>" {
+ pass "begin commands in bp_deleted_in_command_test"
+ }
+ -re "$gdb_prompt $" {fail "begin commands in bp_deleted_in_command_test"}
+ timeout {fail "(timeout) begin commands bp_deleted_in_command_test"}
+ }
+ send_gdb "silent\n"
+ gdb_expect {
+ -re ">" {pass "add silent command"}
+ -re "$gdb_prompt $" {fail "add silent command"}
+ timeout {fail "(timeout) add silent command"}
+ }
+ send_gdb "clear factorial\n"
+ gdb_expect {
+ -re ">" {pass "add clear command"}
+ -re "$gdb_prompt $" {fail "add clear command"}
+ timeout {fail "(timeout) add clear command"} }
+ send_gdb "printf \"factorial command-list executed\\n\"\n"
+ gdb_expect {
+ -re ">" {pass "add printf command"}
+ -re "$gdb_prompt $" {fail "add printf command"}
+ timeout {fail "(timeout) add printf command"}
+ }
+ send_gdb "cont\n"
+ gdb_expect {
+ -re ">" {pass "add cont command"}
+ -re "$gdb_prompt $" {fail "add cont command"}
+ timeout {fail "(timeout) add cont command"} }
+ send_gdb "end\n"
+ gdb_expect {
+ -re "$gdb_prompt $" {pass "end commands"}
+ timeout {fail "(timeout) end commands"}
+ }
+
+ gdb_run_cmd
+ gdb_expect {
+ -re ".*factorial command-list executed.*1.*$gdb_prompt $" {
+ pass "run factorial until breakpoint"
+ }
+ -re ".*$gdb_prompt $" {
+ fail "run factorial until breakpoint"
+ }
+ default { fail "(timeout) run factorial until breakpoint" }
+ timeout { fail "(timeout) run factorial until breakpoint" }
+ }
}
+proc temporary_breakpoint_commands {} {
+ global gdb_prompt
+
+ if [target_info exists noargs] {
+ verbose "Skipping temporary_breakpoint_commands because of noargs."
+ return
+ }
+
+ gdb_test "set args 1" "" "set args in temporary_breakpoint_commands"
+ delete_breakpoints
+
+ # Create a temporary breakpoint, and associate a commands list to it.
+ # This test will verify that this commands list is executed when the
+ # breakpoint is hit.
+ gdb_test "tbreak factorial" \
+ "Breakpoint \[0-9\]+ at .*: file .*/run.c, line \[0-9\]+\." \
+ "breakpoint in temporary_breakpoint_commands"
+
+ send_gdb "commands\n"
+ gdb_expect {
+ -re "Type commands for when breakpoint .* is hit, one per line.*>" {
+ pass "begin commands in bp_deleted_in_command_test"
+ }
+ -re "$gdb_prompt $" {fail "begin commands in bp_deleted_in_command_test"}
+ timeout {fail "(timeout) begin commands bp_deleted_in_command_test"}
+ }
+ send_gdb "silent\n"
+ gdb_expect {
+ -re ">" {pass "add silent tbreak command"}
+ -re "$gdb_prompt $" {fail "add silent tbreak command"}
+ timeout {fail "(timeout) add silent tbreak command"}
+ }
+ send_gdb "printf \"factorial tbreak commands executed\\n\"\n"
+ gdb_expect {
+ -re ">" {pass "add printf tbreak command"}
+ -re "$gdb_prompt $" {fail "add printf tbreak command"}
+ timeout {fail "(timeout) add printf tbreak command"}
+ }
+ send_gdb "cont\n"
+ gdb_expect {
+ -re ">" {pass "add cont tbreak command"}
+ -re "$gdb_prompt $" {fail "add cont tbreak command"}
+ timeout {fail "(timeout) add cont tbreak command"} }
+ send_gdb "end\n"
+ gdb_expect {
+ -re "$gdb_prompt $" {pass "end tbreak commands"}
+ timeout {fail "(timeout) end tbreak commands"}
+ }
+ gdb_run_cmd
+ gdb_expect {
+ -re ".*factorial tbreak commands executed.*1.*$gdb_prompt $" {
+ pass "run factorial until temporary breakpoint"
+ }
+ timeout { fail "(timeout) run factorial until temporary breakpoint" }
+ }
+}
+
gdbvar_simple_if_test
gdbvar_simple_while_test
gdbvar_complex_if_while_test
watchpoint_command_test
test_command_prompt_position
deprecated_command_test
+bp_deleted_in_command_test
+temporary_breakpoint_commands
projects / deliverable / binutils-gdb.git / blobdiff