-# Copyright 2002, 2004, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+# Copyright 2002-2014 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# This file was written by Michael Snyder (msnyder@redhat.com)
# This is a test for the gdb command "dump".
-if $tracelevel then {
- strace $tracelevel
-}
-
-set testfile "dump"
+standard_testfile
-set srcfile ${testfile}.c
-set binfile ${objdir}/${subdir}/${testfile}
set options {debug}
set is64bitonly "no"
lappend options "additional_flags=-Wl,-taso"
}
-if {[istarget "ia64*-*-*"] || [istarget "hppa64-*-*"]} then {
- set is64bitonly "yes"
-}
-
if {[istarget "spu*-*-*"]} then {
# The internal address format used for the combined Cell/B.E.
# debugger requires 64-bit.
gdb_load ${binfile}
+# Check the address of a variable. If it is bigger than 32-bit,
+# assume our target has 64-bit addresses that are not supported by SREC,
+# IHEX and TEKHEX. We skip those tests then.
+set max_32bit_address "0xffffffff"
+set data_address [get_hexadecimal_valueof "&intarray" 0x100000000]
+if {${data_address} > ${max_32bit_address}} then {
+ set is64bitonly "yes"
+}
+
# Clean up any stale output files from previous test runs
-remote_exec build "rm -f intarr1.bin intarr1b.bin intarr1.ihex intarr1.srec intarr1.tekhex intarr2.bin intarr2b.bin intarr2.ihex intarr2.srec intarr2.tekhex intstr1.bin intstr1b.bin intstr1.ihex intstr1.srec intstr1.tekhex intstr2.bin intstr2b.bin intstr2.ihex intstr2.srec intstr2.tekhex intarr3.srec"
+set filenames {}
+set all_files {
+ intarr1.bin intarr1b.bin intarr1.ihex
+ intarr1.srec intarr1.tekhex intarr2.bin intarr2b.bin intarr2.ihex
+ intarr2.srec intarr2.tekhex intstr1.bin intstr1b.bin intstr1.ihex
+ intstr1.srec intstr1.tekhex intstr2.bin intstr2b.bin intstr2.ihex
+ intstr2.srec intstr2.tekhex intarr3.srec
+}
+
+# This loop sets variables dynamically -- each name listed in
+# $ALL_FILES is both a file name and a variable name.
+foreach file $all_files {
+ if {[is_remote host]} {
+ set this_name $file
+ } else {
+ set this_name [standard_output_file $file]
+ }
+
+ lappend filenames [set ${file} $this_name]
+}
+
+remote_exec host "rm -f $filenames"
# Test help (FIXME:)
}
}
-make_dump_file "dump val intarr1.bin intarray" \
+make_dump_file "dump val [set intarr1.bin] intarray" \
"dump array as value, default"
-make_dump_file "dump val intstr1.bin intstruct" \
+make_dump_file "dump val [set intstr1.bin] intstruct" \
"dump struct as value, default"
-make_dump_file "dump bin val intarr1b.bin intarray" \
+make_dump_file "dump bin val [set intarr1b.bin] intarray" \
"dump array as value, binary"
-make_dump_file "dump bin val intstr1b.bin intstruct" \
+make_dump_file "dump bin val [set intstr1b.bin] intstruct" \
"dump struct as value, binary"
-make_dump_file "dump srec val intarr1.srec intarray" \
+make_dump_file "dump srec val [set intarr1.srec] intarray" \
"dump array as value, srec"
-make_dump_file "dump srec val intstr1.srec intstruct" \
+make_dump_file "dump srec val [set intstr1.srec] intstruct" \
"dump struct as value, srec"
-make_dump_file "dump ihex val intarr1.ihex intarray" \
+make_dump_file "dump ihex val [set intarr1.ihex] intarray" \
"dump array as value, intel hex"
-make_dump_file "dump ihex val intstr1.ihex intstruct" \
+make_dump_file "dump ihex val [set intstr1.ihex] intstruct" \
"dump struct as value, intel hex"
-make_dump_file "dump tekhex val intarr1.tekhex intarray" \
+make_dump_file "dump tekhex val [set intarr1.tekhex] intarray" \
"dump array as value, tekhex"
-make_dump_file "dump tekhex val intstr1.tekhex intstruct" \
+make_dump_file "dump tekhex val [set intstr1.tekhex] intstruct" \
"dump struct as value, tekhex"
proc capture_value { expression args } {
set output_string ""
if {[llength $args] > 0} {
- # Convert $args into a simple string.
- set test "[join $args]; capture $expression"
+ # Convert $args into a simple string and don't use EXPRESSION
+ # in the test name.
+ set test "[join $args]; capture"
} {
set test "capture $expression"
}
return $output_string
}
+# POINTER is a pointer and this proc captures the value of POINTER along
+# with POINTER's type. For example, POINTER is "&intarray", this proc will
+# call "p &intarray", capture "(int (*)[32]) 0x804a0e0", and return this
+# string.
+
+proc capture_pointer_with_type { pointer } {
+ global gdb_prompt
+ global expect_out
+
+ set test "capture type of pointer $pointer"
+ set output_string ""
+ gdb_test_multiple "p ${pointer}" $test {
+ -re "\\$\[0-9\]+ = .*$gdb_prompt $" {
+ # Expected output of "p ${pointer}" is like "$7 = (int (*)[32]) 0x804a0e0",
+ # and we want to extract "(int (*)[32]) 0x804a0e0" from it via
+ # following regexp.
+ if [regexp " \\(.*\\).* 0x\[0-9a-fA-F\]+" $expect_out(0,string) output_string] {
+ # OUTPUT_STRING is expected to be like "(int (*)[32]) 0x804a0e0".
+ pass "$test"
+ } else {
+ fail "$test"
+ }
+ }
+ }
+
+ return $output_string
+}
+
set array_start [capture_value "/x &intarray\[0\]"]
set array_end [capture_value "/x &intarray\[32\]"]
set struct_start [capture_value "/x &intstruct"]
set array_val [capture_value "intarray"]
set struct_val [capture_value "intstruct"]
-make_dump_file "dump mem intarr2.bin $array_start $array_end" \
+set array_ptr_type [capture_pointer_with_type "&intarray"]
+set struct_ptr_type [capture_pointer_with_type "&intstruct"]
+
+make_dump_file "dump mem [set intarr2.bin] $array_start $array_end" \
"dump array as memory, default"
-make_dump_file "dump mem intstr2.bin $struct_start $struct_end" \
+make_dump_file "dump mem [set intstr2.bin] $struct_start $struct_end" \
"dump struct as memory, default"
-make_dump_file "dump bin mem intarr2b.bin $array_start $array_end" \
+make_dump_file "dump bin mem [set intarr2b.bin] $array_start $array_end" \
"dump array as memory, binary"
-make_dump_file "dump bin mem intstr2b.bin $struct_start $struct_end" \
+make_dump_file "dump bin mem [set intstr2b.bin] $struct_start $struct_end" \
"dump struct as memory, binary"
-make_dump_file "dump srec mem intarr2.srec $array_start $array_end" \
+make_dump_file "dump srec mem [set intarr2.srec] $array_start $array_end" \
"dump array as memory, srec"
-make_dump_file "dump srec mem intstr2.srec $struct_start $struct_end" \
+make_dump_file "dump srec mem [set intstr2.srec] $struct_start $struct_end" \
"dump struct as memory, srec"
-make_dump_file "dump ihex mem intarr2.ihex $array_start $array_end" \
+make_dump_file "dump ihex mem [set intarr2.ihex] $array_start $array_end" \
"dump array as memory, ihex"
-make_dump_file "dump ihex mem intstr2.ihex $struct_start $struct_end" \
+make_dump_file "dump ihex mem [set intstr2.ihex] $struct_start $struct_end" \
"dump struct as memory, ihex"
-make_dump_file "dump tekhex mem intarr2.tekhex $array_start $array_end" \
+make_dump_file "dump tekhex mem [set intarr2.tekhex] $array_start $array_end" \
"dump array as memory, tekhex"
-make_dump_file "dump tekhex mem intstr2.tekhex $struct_start $struct_end" \
+make_dump_file "dump tekhex mem [set intstr2.tekhex] $struct_start $struct_end" \
"dump struct as memory, tekhex"
# test complex expressions
make_dump_file \
- "dump srec mem intarr3.srec &intarray \(char *\) &intarray + sizeof intarray" \
+ "dump srec mem [set intarr3.srec] &intarray \(char *\) &intarray + sizeof intarray" \
"dump array as mem, srec, expressions"
-
-# Now start a fresh gdb session, and reload the saved value files.
-
-gdb_exit
-gdb_start
-gdb_file_cmd ${binfile}
-
-# Now fix the endianness at the correct state.
-
-gdb_test_multiple "set endian $endian" "set endianness" {
- -re ".* (big|little) endian.*$gdb_prompt $" {
- pass "setting $endian endianness"
- }
-}
-
-# Reload saved values one by one, and compare.
-
-if { ![string compare $array_val \
- [capture_value "intarray" "file binfile"]] } then {
- fail "start with intarray un-initialized"
-} else {
- pass "start with intarray un-initialized"
-}
-
-if { ![string compare $struct_val \
- [capture_value "intstruct" "file binfile"]] } then {
- fail "start with intstruct un-initialized"
-} else {
- pass "start with intstruct un-initialized"
-}
-
-proc test_reload_saved_value { filename msg oldval newval } {
- global gdb_prompt
-
- gdb_file_cmd $filename
- if { ![string compare $oldval \
- [capture_value $newval "$msg"]] } then {
- pass "$msg; value restored ok"
- } else {
- fail "$msg; value restored ok"
- }
-}
-
proc test_restore_saved_value { restore_args msg oldval newval } {
global gdb_prompt
}
}
-# srec format can not be loaded for 64-bit-only platforms
if ![string compare $is64bitonly "no"] then {
- test_reload_saved_value "intarr1.srec" "reload array as value, srec" \
- $array_val "intarray"
- test_reload_saved_value "intstr1.srec" "reload struct as value, srec" \
- $struct_val "intstruct"
- test_reload_saved_value "intarr2.srec" "reload array as memory, srec" \
- $array_val "intarray"
- test_reload_saved_value "intstr2.srec" "reload struct as memory, srec" \
- $struct_val "intstruct"
-}
-# ihex format can not be loaded for 64-bit-only platforms
-if ![string compare $is64bitonly "no"] then {
+ gdb_test "print zero_all ()" ".*"
- test_reload_saved_value "intarr1.ihex" "reload array as value, intel hex" \
- $array_val "intarray"
- test_reload_saved_value "intstr1.ihex" "reload struct as value, intel hex" \
- $struct_val "intstruct"
- test_reload_saved_value "intarr2.ihex" "reload array as memory, intel hex" \
+ test_restore_saved_value "[set intarr1.srec]" "array as value, srec" \
$array_val "intarray"
- test_reload_saved_value "intstr2.ihex" "reload struct as memory, intel hex" \
- $struct_val "intstruct"
-}
-# tekhex format can not be loaded for 64-bit-only platforms
-if ![string compare $is64bitonly "no"] then {
- test_reload_saved_value "intarr1.tekhex" "reload array as value, tekhex" \
- $array_val "intarray"
- test_reload_saved_value "intstr1.tekhex" "reload struct as value, tekhex" \
- $struct_val "intstruct"
- test_reload_saved_value "intarr2.tekhex" "reload array as memory, tekhex" \
- $array_val "intarray"
- test_reload_saved_value "intstr2.tekhex" "reload struct as memory, tekhex" \
- $struct_val "intstruct"
-}
-
-# Start a fresh gdb session
-
-gdb_exit
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
-
-# Run to main.
-if { ! [ runto_main ] } then {
- untested dump.exp
- return -1
-}
-
-if { ![string compare $array_val \
- [capture_value "intarray" "load binfile"]] } then {
- fail "start with intarray un-initialized, runto main"
-} else {
- pass "start with intarray un-initialized, runto main"
-}
-
-if { ![string compare $struct_val \
- [capture_value "intstruct" "load binfile"]] } then {
- fail "start with intstruct un-initialized, runto main"
-} else {
- pass "start with intstruct un-initialized, runto main"
-}
-
-if ![string compare $is64bitonly "no"] then {
- test_restore_saved_value "intarr1.srec" "array as value, srec" \
- $array_val "intarray"
-
- test_restore_saved_value "intstr1.srec" "struct as value, srec" \
+ test_restore_saved_value "[set intstr1.srec]" "struct as value, srec" \
$struct_val "intstruct"
gdb_test "print zero_all ()" "void" "zero all"
- test_restore_saved_value "intarr2.srec" "array as memory, srec" \
+ test_restore_saved_value "[set intarr2.srec]" "array as memory, srec" \
$array_val "intarray"
- test_restore_saved_value "intstr2.srec" "struct as memory, srec" \
+ test_restore_saved_value "[set intstr2.srec]" "struct as memory, srec" \
$struct_val "intstruct"
- gdb_test "print zero_all ()" ""
+ gdb_test "print zero_all ()" ".*"
- test_restore_saved_value "intarr1.ihex" "array as value, ihex" \
+ test_restore_saved_value "[set intarr1.ihex]" "array as value, ihex" \
$array_val "intarray"
- test_restore_saved_value "intstr1.ihex" "struct as value, ihex" \
+ test_restore_saved_value "[set intstr1.ihex]" "struct as value, ihex" \
$struct_val "intstruct"
- gdb_test "print zero_all ()" ""
+ gdb_test "print zero_all ()" ".*"
- test_restore_saved_value "intarr2.ihex" "array as memory, ihex" \
+ test_restore_saved_value "[set intarr2.ihex]" "array as memory, ihex" \
$array_val "intarray"
- test_restore_saved_value "intstr2.ihex" "struct as memory, ihex" \
+ test_restore_saved_value "[set intstr2.ihex]" "struct as memory, ihex" \
$struct_val "intstruct"
- gdb_test "print zero_all ()" ""
+ gdb_test "print zero_all ()" ".*"
- test_restore_saved_value "intarr1.tekhex" "array as value, tekhex" \
+ test_restore_saved_value "[set intarr1.tekhex]" "array as value, tekhex" \
$array_val "intarray"
- test_restore_saved_value "intstr1.tekhex" "struct as value, tekhex" \
+ test_restore_saved_value "[set intstr1.tekhex]" "struct as value, tekhex" \
$struct_val "intstruct"
- gdb_test "print zero_all ()" ""
+ gdb_test "print zero_all ()" ".*"
- test_restore_saved_value "intarr2.tekhex" "array as memory, tekhex" \
+ test_restore_saved_value "[set intarr2.tekhex]" "array as memory, tekhex" \
$array_val "intarray"
- test_restore_saved_value "intstr2.tekhex" "struct as memory, tekhex" \
+ test_restore_saved_value "[set intstr2.tekhex]" "struct as memory, tekhex" \
$struct_val "intstruct"
}
-gdb_test "print zero_all ()" ""
+gdb_test "print zero_all ()" ".*"
-test_restore_saved_value "intarr1.bin binary $array_start" \
+test_restore_saved_value "[set intarr1.bin] binary $array_start" \
"array as value, binary" \
$array_val "intarray"
-test_restore_saved_value "intstr1.bin binary $struct_start" \
+test_restore_saved_value "[set intstr1.bin] binary $struct_start" \
"struct as value, binary" \
$struct_val "intstruct"
-gdb_test "print zero_all ()" ""
+gdb_test "print zero_all ()" ".*"
-test_restore_saved_value "intarr2.bin binary $array_start" \
+test_restore_saved_value "[set intarr2.bin] binary $array_start" \
"array as memory, binary" \
$array_val "intarray"
-test_restore_saved_value "intstr2.bin binary $struct_start" \
+test_restore_saved_value "[set intstr2.bin] binary $struct_start" \
"struct as memory, binary" \
$struct_val "intstruct"
set struct2_offset \
[capture_value "(char *) &intstruct2 - (char *) &intstruct"]
-gdb_test "print zero_all ()" ""
+gdb_test "print zero_all ()" ".*"
if ![string compare $is64bitonly "no"] then {
- test_restore_saved_value "intarr1.srec $array2_offset" \
+ test_restore_saved_value "[set intarr1.srec] $array2_offset" \
"array copy, srec" \
$array_val "intarray2"
- test_restore_saved_value "intstr1.srec $struct2_offset" \
+ test_restore_saved_value "[set intstr1.srec] $struct2_offset" \
"struct copy, srec" \
$struct_val "intstruct2"
- gdb_test "print zero_all ()" ""
+ gdb_test "print zero_all ()" ".*"
- test_restore_saved_value "intarr1.ihex $array2_offset" \
+ test_restore_saved_value "[set intarr1.ihex] $array2_offset" \
"array copy, ihex" \
$array_val "intarray2"
- test_restore_saved_value "intstr1.ihex $struct2_offset" \
+ test_restore_saved_value "[set intstr1.ihex] $struct2_offset" \
"struct copy, ihex" \
$struct_val "intstruct2"
- gdb_test "print zero_all ()" ""
+ gdb_test "print zero_all ()" ".*"
- test_restore_saved_value "intarr1.tekhex $array2_offset" \
+ test_restore_saved_value "[set intarr1.tekhex] $array2_offset" \
"array copy, tekhex" \
$array_val "intarray2"
- test_restore_saved_value "intstr1.tekhex $struct2_offset" \
+ test_restore_saved_value "[set intstr1.tekhex] $struct2_offset" \
"struct copy, tekhex" \
$struct_val "intstruct2"
}
-gdb_test "print zero_all ()" ""
+gdb_test "print zero_all ()" ".*"
-test_restore_saved_value "intarr1.bin binary $array2_start" \
+test_restore_saved_value "[set intarr1.bin] binary $array2_start" \
"array copy, binary" \
$array_val "intarray2"
-test_restore_saved_value "intstr1.bin binary $struct2_start" \
+test_restore_saved_value "[set intstr1.bin] binary $struct2_start" \
"struct copy, binary" \
$struct_val "intstruct2"
[capture_value "/x (char *) &intarray\[4\] - (char *) &intarray\[0\]"]
if ![string compare $is64bitonly "no"] then {
- gdb_test "print zero_all ()" ""
+ gdb_test "print zero_all ()" ".*"
- test_restore_saved_value "intarr1.srec 0 $element3_start $element4_start" \
+ test_restore_saved_value "[set intarr1.srec] 0 $element3_start $element4_start" \
"array partial, srec" 4 "intarray\[3\]"
gdb_test "print intarray\[2\] == 0" " = 1" "element 2 not changed - 1"
gdb_test "print intarray\[4\] == 0" " = 1" "element 4 not changed - 1"
- gdb_test "print zero_all ()" ""
+ gdb_test "print zero_all ()" ".*"
- test_restore_saved_value "intarr1.ihex 0 $element3_start $element4_start" \
+ test_restore_saved_value "[set intarr1.ihex] 0 $element3_start $element4_start" \
"array partial, ihex" 4 "intarray\[3\]"
gdb_test "print intarray\[2\] == 0" " = 1" "element 2 not changed - 2"
gdb_test "print intarray\[4\] == 0" " = 1" "element 4 not changed - 2"
- gdb_test "print zero_all ()" ""
+ gdb_test "print zero_all ()" ".*"
- test_restore_saved_value "intarr1.tekhex 0 $element3_start $element4_start" \
+ test_restore_saved_value "[set intarr1.tekhex] 0 $element3_start $element4_start" \
"array partial, tekhex" 4 "intarray\[3\]"
gdb_test "print intarray\[2\] == 0" " = 1" "element 2 not changed - 3"
gdb_test "print intarray\[4\] == 0" " = 1" "element 4 not changed - 3"
}
-gdb_test "print zero_all ()" ""
+gdb_test "print zero_all ()" ".*"
test_restore_saved_value \
- "intarr1.bin binary $array_start $element3_offset $element4_offset" \
+ "[set intarr1.bin] binary $array_start $element3_offset $element4_offset" \
"array partial, binary" 4 "intarray\[3\]"
gdb_test "print intarray\[2\] == 0" " = 1" "element 2 not changed - 4"
gdb_test "print intarray\[4\] == 0" " = 1" "element 4 not changed - 4"
if ![string compare $is64bitonly "no"] then {
- gdb_test "print zero_all ()" "" ""
+ gdb_test "print zero_all ()" ".*" ""
# restore with expressions
test_restore_saved_value \
- "intarr3.srec (char*)${array2_start}-(char*)${array_start} &intarray\[3\] &intarray\[4\]" \
+ "[set intarr3.srec] (char*)${array2_start}-(char*)${array_start} &intarray\[3\] &intarray\[4\]" \
"array partial with expressions" 4 "intarray2\[3\]"
gdb_test "print intarray2\[2\] == 0" " = 1" "element 2 not changed, == 4"
gdb_test "print intarray2\[4\] == 0" " = 1" "element 4 not changed, == 4"
}
+
+# Now start a fresh gdb session, and reload the saved value files.
+
+gdb_exit
+gdb_start
+gdb_file_cmd ${binfile}
+
+# Now fix the endianness at the correct state.
+
+gdb_test_multiple "set endian $endian" "set endianness" {
+ -re ".* (big|little) endian.*$gdb_prompt $" {
+ pass "setting $endian endianness"
+ }
+}
+
+# Reload saved values one by one, and compare.
+
+if { ![string compare $array_val \
+ [capture_value "intarray" "file binfile; intarray"]] } then {
+ fail "start with intarray un-initialized"
+} else {
+ pass "start with intarray un-initialized"
+}
+
+if { ![string compare $struct_val \
+ [capture_value "intstruct" "file binfile; intstruct"]] } then {
+ fail "start with intstruct un-initialized"
+} else {
+ pass "start with intstruct un-initialized"
+}
+
+proc test_reload_saved_value { filename msg oldval newval } {
+ global gdb_prompt
+
+ gdb_file_cmd $filename
+ if { ![string compare $oldval \
+ [capture_value $newval "$msg"]] } then {
+ pass "$msg; value restored ok"
+ } else {
+ fail "$msg; value restored ok"
+ }
+}
+
+# srec format can not be loaded for 64-bit-only platforms
+if ![string compare $is64bitonly "no"] then {
+ test_reload_saved_value "[set intarr1.srec]" "reload array as value, srec" \
+ $array_val "\*$array_ptr_type"
+ test_reload_saved_value "[set intstr1.srec]" "reload struct as value, srec" \
+ $struct_val "\*$struct_ptr_type"
+ test_reload_saved_value "[set intarr2.srec]" "reload array as memory, srec" \
+ $array_val "\*$array_ptr_type"
+ test_reload_saved_value "[set intstr2.srec]" "reload struct as memory, srec" \
+ $struct_val "\*$struct_ptr_type"
+}
+
+# ihex format can not be loaded for 64-bit-only platforms
+if ![string compare $is64bitonly "no"] then {
+
+ test_reload_saved_value "[set intarr1.ihex]" \
+ "reload array as value, intel hex" \
+ $array_val "\*$array_ptr_type"
+ test_reload_saved_value "[set intstr1.ihex]" \
+ "reload struct as value, intel hex" \
+ $struct_val "\*$struct_ptr_type"
+ test_reload_saved_value "[set intarr2.ihex]" \
+ "reload array as memory, intel hex" \
+ $array_val "\*$array_ptr_type"
+ test_reload_saved_value "[set intstr2.ihex]" \
+ "reload struct as memory, intel hex" \
+ $struct_val "\*$struct_ptr_type"
+}
+
+# tekhex format can not be loaded for 64-bit-only platforms
+if ![string compare $is64bitonly "no"] then {
+ test_reload_saved_value "[set intarr1.tekhex]" \
+ "reload array as value, tekhex" \
+ $array_val "\*$array_ptr_type"
+ test_reload_saved_value "[set intstr1.tekhex]" \
+ "reload struct as value, tekhex" \
+ $struct_val "\*$struct_ptr_type"
+ test_reload_saved_value "[set intarr2.tekhex]" \
+ "reload array as memory, tekhex" \
+ $array_val "\*$array_ptr_type"
+ test_reload_saved_value "[set intstr2.tekhex]" \
+ "reload struct as memory, tekhex" \
+ $struct_val "\*$struct_ptr_type"
+}
+
# clean up files
-remote_exec build "rm -f intarr1.bin intarr1b.bin intarr1.ihex intarr1.srec intarr1.tekhex intarr2.bin intarr2b.bin intarr2.ihex intarr2.srec intarr2.tekhex intstr1.bin intstr1b.bin intstr1.ihex intstr1.srec intstr1.tekhex intstr2.bin intstr2b.bin intstr2.ihex intstr2.srec intstr2.tekhex intarr3.srec"
+remote_exec host "rm -f $filenames"
projects / deliverable / binutils-gdb.git / blobdiff