+# Copyright 2002-2018 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
-#
+#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
-#
+#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-# Please email any bugs, comments, and/or additions to this file to:
-# bug-gdb@prep.ai.mit.edu
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
# This file was written by Michael Snyder (msnyder@redhat.com)
# This is a test for the gdb command "dump".
-if $tracelevel then {
- strace $tracelevel
-}
-set prms_id 0
-set bug_id 0
+standard_testfile
-set testfile "dump"
+set options {debug}
-set srcfile ${testfile}.c
-set binfile ${objdir}/${subdir}/${testfile}
+set is64bitonly "no"
+set endian "auto"
-if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
- gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+if [istarget "alpha*-*-*"] then {
+ # SREC etc cannot handle 64-bit addresses. Force the test
+ # program into the low 31 bits of the address space.
+ lappend options "additional_flags=-Wl,-taso"
+}
+
+if {[istarget "spu*-*-*"]} then {
+ # The internal address format used for the combined Cell/B.E.
+ # debugger requires 64-bit.
+ set is64bitonly "yes"
+}
+
+if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable ${options}] != "" } {
+ untested "failed to compile"
+ return -1
}
# Start with a fresh gdb.
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
+
+gdb_test "dump mem /dev/null 0x10 0x20" "Cannot access memory at address 0x10" \
+ "inaccessible memory is reported"
+
gdb_load ${binfile}
+# Check the address of a variable. If it is bigger than 32-bit,
+# assume our target has 64-bit addresses that are not supported by SREC,
+# IHEX and TEKHEX. We skip those tests then.
+set max_32bit_address "0xffffffff"
+set data_address [get_hexadecimal_valueof "&intarray" 0x100000000]
+if {${data_address} > ${max_32bit_address}} then {
+ set is64bitonly "yes"
+}
+
# Clean up any stale output files from previous test runs
-remote_exec build "rm -f intarr1.bin intarr1b.bin intarr1.ihex intarr1.srec intarr1.tekhex intarr2.bin intarr2b.bin intarr2.ihex intarr2.srec intarr2.tekhex intstr1.bin intstr1b.bin intstr1.ihex intstr1.srec intstr1.tekhex intstr2.bin intstr2b.bin intstr2.ihex intstr2.srec intstr2.tekhex intarr3.srec"
+set filenames {}
+set all_files {
+ intarr1.bin intarr1b.bin intarr1.ihex
+ intarr1.srec intarr1.tekhex intarr1.verilog
+ intarr2.bin intarr2b.bin intarr2.ihex
+ intarr2.srec intarr2.tekhex intarr2.verilog
+ intstr1.bin intstr1b.bin intstr1.ihex
+ intstr1.srec intstr1.tekhex intstr1.verilog
+ intstr2.bin intstr2b.bin intstr2.ihex
+ intstr2.srec intstr2.tekhex intstr2.verilog
+ intarr3.srec
+}
+
+# This loop sets variables dynamically -- each name listed in
+# $ALL_FILES is both a file name and a variable name.
+foreach file $all_files {
+ if {[is_remote host]} {
+ set this_name $file
+ } else {
+ set this_name [standard_output_file $file]
+ }
+
+ lappend filenames [set ${file} $this_name]
+}
+
+remote_exec host "rm -f $filenames"
# Test help (FIXME:)
# Run target program until data structs are initialized.
if { ! [ runto checkpoint1 ] } then {
- gdb_suppress_entire_file "Program failed to run, so all tests in this file will automatically fail."
+ untested "couldn't run to checkpoint"
+ return -1
}
+# Get the endianness for the later use with endianless formats.
+
+set endian [get_endianness]
+
# Now generate some dump files.
proc make_dump_file { command msg } {
global gdb_prompt
- send_gdb "${command}\n"
- gdb_expect {
+ gdb_test_multiple "${command}" "$msg" {
-re ".*\[Ee\]rror.*$gdb_prompt $" { fail $msg }
-re ".*\[Ww\]arning.*$gdb_prompt $" { fail $msg }
-re ".*\[Uu\]ndefined .*$gdb_prompt $" { fail $msg }
- -re ".*$gdb_prompt $" { pass $msg }
- timeout { fail "$msg (timeout)" }
+ -re ".*$gdb_prompt $" { pass $msg }
}
}
-make_dump_file "dump val intarr1.bin intarray" \
+make_dump_file "dump val [set intarr1.bin] intarray" \
"dump array as value, default"
-make_dump_file "dump val intstr1.bin intstruct" \
+make_dump_file "dump val [set intstr1.bin] intstruct" \
"dump struct as value, default"
-make_dump_file "dump bin val intarr1b.bin intarray" \
+make_dump_file "dump bin val [set intarr1b.bin] intarray" \
"dump array as value, binary"
-make_dump_file "dump bin val intstr1b.bin intstruct" \
+make_dump_file "dump bin val [set intstr1b.bin] intstruct" \
"dump struct as value, binary"
-make_dump_file "dump srec val intarr1.srec intarray" \
+make_dump_file "dump srec val [set intarr1.srec] intarray" \
"dump array as value, srec"
-make_dump_file "dump srec val intstr1.srec intstruct" \
+make_dump_file "dump srec val [set intstr1.srec] intstruct" \
"dump struct as value, srec"
-make_dump_file "dump ihex val intarr1.ihex intarray" \
+make_dump_file "dump ihex val [set intarr1.ihex] intarray" \
"dump array as value, intel hex"
-make_dump_file "dump ihex val intstr1.ihex intstruct" \
+make_dump_file "dump ihex val [set intstr1.ihex] intstruct" \
"dump struct as value, intel hex"
-make_dump_file "dump tekhex val intarr1.tekhex intarray" \
+make_dump_file "dump tekhex val [set intarr1.tekhex] intarray" \
"dump array as value, tekhex"
-make_dump_file "dump tekhex val intstr1.tekhex intstruct" \
+make_dump_file "dump tekhex val [set intstr1.tekhex] intstruct" \
"dump struct as value, tekhex"
-proc capture_value { expression } {
+make_dump_file "dump verilog val [set intarr1.verilog] intarray" \
+ "dump array as value, verilog"
+
+make_dump_file "dump verilog val [set intstr1.verilog] intstruct" \
+ "dump struct as value, verilog"
+
+proc capture_value { expression args } {
global gdb_prompt
global expect_out
set output_string ""
- send_gdb "print ${expression}\n"
- gdb_expect {
- -re ".*\[\r\n\]+.\[0123456789\]+ = (\[^\r\n\]+).*$gdb_prompt $" {
- set output_string $expect_out(1,string)
+ if {[llength $args] > 0} {
+ # Convert $args into a simple string and don't use EXPRESSION
+ # in the test name.
+ set test "[join $args]; capture"
+ } {
+ set test "capture $expression"
+ }
+ gdb_test_multiple "print ${expression}" "$test" {
+ -re "\\$\[0-9\]+ = (\[^\r\n\]+).*$gdb_prompt $" {
+ set output_string "$expect_out(1,string)"
+ pass "$test"
}
- default {
- fail "capture_value failed on $expression."
+ -re "(Cannot access memory at address \[^\r\n\]+).*$gdb_prompt $" {
+ # Even a failed value is valid
+ set output_string "$expect_out(1,string)"
+ pass "$test"
+ }
+ }
+ return $output_string
+}
+
+# POINTER is a pointer and this proc captures the value of POINTER along
+# with POINTER's type. For example, POINTER is "&intarray", this proc will
+# call "p &intarray", capture "(int (*)[32]) 0x804a0e0", and return this
+# string.
+
+proc capture_pointer_with_type { pointer } {
+ global gdb_prompt
+ global expect_out
+
+ set test "capture type of pointer $pointer"
+ set output_string ""
+ gdb_test_multiple "p ${pointer}" $test {
+ -re "\\$\[0-9\]+ = .*$gdb_prompt $" {
+ # Expected output of "p ${pointer}" is like "$7 = (int (*)[32]) 0x804a0e0",
+ # and we want to extract "(int (*)[32]) 0x804a0e0" from it via
+ # following regexp.
+ if [regexp " \\(.*\\).* 0x\[0-9a-fA-F\]+" $expect_out(0,string) output_string] {
+ # OUTPUT_STRING is expected to be like "(int (*)[32]) 0x804a0e0".
+ pass "$test"
+ } else {
+ fail "$test"
+ }
}
}
+
return $output_string
}
set array_val [capture_value "intarray"]
set struct_val [capture_value "intstruct"]
-make_dump_file "dump mem intarr2.bin $array_start $array_end" \
+set array_ptr_type [capture_pointer_with_type "&intarray"]
+set struct_ptr_type [capture_pointer_with_type "&intstruct"]
+
+make_dump_file "dump mem [set intarr2.bin] $array_start $array_end" \
"dump array as memory, default"
-make_dump_file "dump mem intstr2.bin $struct_start $struct_end" \
+make_dump_file "dump mem [set intstr2.bin] $struct_start $struct_end" \
"dump struct as memory, default"
-make_dump_file "dump bin mem intarr2b.bin $array_start $array_end" \
+make_dump_file "dump bin mem [set intarr2b.bin] $array_start $array_end" \
"dump array as memory, binary"
-make_dump_file "dump bin mem intstr2b.bin $struct_start $struct_end" \
+make_dump_file "dump bin mem [set intstr2b.bin] $struct_start $struct_end" \
"dump struct as memory, binary"
-make_dump_file "dump srec mem intarr2.srec $array_start $array_end" \
+make_dump_file "dump srec mem [set intarr2.srec] $array_start $array_end" \
"dump array as memory, srec"
-make_dump_file "dump srec mem intstr2.srec $struct_start $struct_end" \
+make_dump_file "dump srec mem [set intstr2.srec] $struct_start $struct_end" \
"dump struct as memory, srec"
-make_dump_file "dump ihex mem intarr2.ihex $array_start $array_end" \
+make_dump_file "dump ihex mem [set intarr2.ihex] $array_start $array_end" \
"dump array as memory, ihex"
-make_dump_file "dump ihex mem intstr2.ihex $struct_start $struct_end" \
+make_dump_file "dump ihex mem [set intstr2.ihex] $struct_start $struct_end" \
"dump struct as memory, ihex"
-make_dump_file "dump tekhex mem intarr2.tekhex $array_start $array_end" \
+make_dump_file "dump tekhex mem [set intarr2.tekhex] $array_start $array_end" \
"dump array as memory, tekhex"
-make_dump_file "dump tekhex mem intstr2.tekhex $struct_start $struct_end" \
+make_dump_file "dump tekhex mem [set intstr2.tekhex] $struct_start $struct_end" \
"dump struct as memory, tekhex"
+make_dump_file "dump verilog mem [set intarr2.verilog] $array_start $array_end" \
+ "dump array as memory, verilog"
+
+make_dump_file "dump verilog mem [set intstr2.verilog] $struct_start $struct_end" \
+ "dump struct as memory, verilog"
+
# test complex expressions
make_dump_file \
- "dump srec mem intarr3.srec &intarray \(char *\) &intarray + sizeof intarray" \
+ "dump srec mem [set intarr3.srec] &intarray \(char *\) &intarray + sizeof intarray" \
"dump array as mem, srec, expressions"
-
-# Now start a fresh gdb session, and reload the saved value files.
-
-gdb_exit
-gdb_start
-gdb_file_cmd ${binfile}
-
-# Reload saved values one by one, and compare.
-
-if { ![string compare $array_val [capture_value "intarray"]] } then {
- fail "start with intarray un-initialized"
-} else {
- pass "start with intarray un-initialized"
-}
-
-if { ![string compare $struct_val [capture_value "intstruct"]] } then {
- fail "start with intstruct un-initialized"
-} else {
- pass "start with intstruct un-initialized"
-}
-
-proc test_reload_saved_value { filename msg oldval newval } {
- global gdb_prompt
-
- gdb_file_cmd $filename
- if { ![string compare $oldval [capture_value $newval]] } then {
- pass $msg
- } else {
- fail $msg
- }
-}
-
proc test_restore_saved_value { restore_args msg oldval newval } {
global gdb_prompt
gdb_test "restore $restore_args" \
- "Restoring .*" \
- "Restore command, $msg"
-
- if { ![string compare $oldval [capture_value $newval]] } then {
- pass "Restored value, $msg"
+ "Restoring .*" \
+ "$msg; file restored ok"
+ if { ![string compare $oldval \
+ [capture_value $newval "$msg"]] } then {
+ pass "$msg; value restored ok"
} else {
- fail "Restored value, $msg"
+ fail "$msg; value restored ok"
}
}
-test_reload_saved_value "intarr1.srec" "reload array as value, srec" \
- $array_val "intarray"
-test_reload_saved_value "intstr1.srec" "reload struct as value, srec" \
- $struct_val "intstruct"
-test_reload_saved_value "intarr2.srec" "reload array as memory, srec" \
- $array_val "intarray"
-test_reload_saved_value "intstr2.srec" "reload struct as memory, srec" \
- $struct_val "intstruct"
-
-test_reload_saved_value "intarr1.ihex" "reload array as value, intel hex" \
- $array_val "intarray"
-test_reload_saved_value "intstr1.ihex" "reload struct as value, intel hex" \
- $struct_val "intstruct"
-test_reload_saved_value "intarr2.ihex" "reload array as memory, intel hex" \
- $array_val "intarray"
-test_reload_saved_value "intstr2.ihex" "reload struct as memory, intel hex" \
- $struct_val "intstruct"
-
-test_reload_saved_value "intarr1.tekhex" "reload array as value, tekhex" \
- $array_val "intarray"
-test_reload_saved_value "intstr1.tekhex" "reload struct as value, tekhex" \
- $struct_val "intstruct"
-test_reload_saved_value "intarr2.tekhex" "reload array as memory, tekhex" \
- $array_val "intarray"
-test_reload_saved_value "intstr2.tekhex" "reload struct as memory, tekhex" \
- $struct_val "intstruct"
-
-# Start a fresh gdb session
-
-gdb_exit
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
-
-# Run to main.
-if { ! [ runto main ] } then {
- gdb_suppress_entire_file "Program failed to run, so remaining tests in this file will automatically fail."
-}
-
-if { ![string compare $array_val [capture_value "intarray"]] } then {
- fail "start with intarray un-initialized, runto main"
-} else {
- pass "start with intarray un-initialized, runto main"
-}
+if ![string compare $is64bitonly "no"] then {
-if { ![string compare $struct_val [capture_value "intstruct"]] } then {
- fail "start with intstruct un-initialized, runto main"
-} else {
- pass "start with intstruct un-initialized, runto main"
-}
+ gdb_test "print zero_all ()" ".*"
-test_restore_saved_value "intarr1.srec" "array as value, srec" \
+ test_restore_saved_value "[set intarr1.srec]" "array as value, srec" \
$array_val "intarray"
-test_restore_saved_value "intstr1.srec" "struct as value, srec" \
+ test_restore_saved_value "[set intstr1.srec]" "struct as value, srec" \
$struct_val "intstruct"
-gdb_test "print zero_all ()" "void" "zero all"
+ gdb_test "print zero_all ()" "void" "zero all"
-test_restore_saved_value "intarr2.srec" "array as memory, srec" \
+ test_restore_saved_value "[set intarr2.srec]" "array as memory, srec" \
$array_val "intarray"
-test_restore_saved_value "intstr2.srec" "struct as memory, srec" \
+ test_restore_saved_value "[set intstr2.srec]" "struct as memory, srec" \
$struct_val "intstruct"
-gdb_test "print zero_all ()" ""
+ gdb_test "print zero_all ()" ".*"
-test_restore_saved_value "intarr1.ihex" "array as value, ihex" \
+ test_restore_saved_value "[set intarr1.ihex]" "array as value, ihex" \
$array_val "intarray"
-test_restore_saved_value "intstr1.ihex" "struct as value, ihex" \
+ test_restore_saved_value "[set intstr1.ihex]" "struct as value, ihex" \
$struct_val "intstruct"
-gdb_test "print zero_all ()" ""
+ gdb_test "print zero_all ()" ".*"
-test_restore_saved_value "intarr2.ihex" "array as memory, ihex" \
+ test_restore_saved_value "[set intarr2.ihex]" "array as memory, ihex" \
$array_val "intarray"
-test_restore_saved_value "intstr2.ihex" "struct as memory, ihex" \
+ test_restore_saved_value "[set intstr2.ihex]" "struct as memory, ihex" \
$struct_val "intstruct"
-gdb_test "print zero_all ()" ""
+ gdb_test "print zero_all ()" ".*"
-test_restore_saved_value "intarr1.tekhex" "array as value, tekhex" \
+ test_restore_saved_value "[set intarr1.tekhex]" "array as value, tekhex" \
$array_val "intarray"
-test_restore_saved_value "intstr1.tekhex" "struct as value, tekhex" \
+ test_restore_saved_value "[set intstr1.tekhex]" "struct as value, tekhex" \
$struct_val "intstruct"
-gdb_test "print zero_all ()" ""
+ gdb_test "print zero_all ()" ".*"
-test_restore_saved_value "intarr2.tekhex" "array as memory, tekhex" \
+ test_restore_saved_value "[set intarr2.tekhex]" "array as memory, tekhex" \
$array_val "intarray"
-test_restore_saved_value "intstr2.tekhex" "struct as memory, tekhex" \
+ test_restore_saved_value "[set intstr2.tekhex]" "struct as memory, tekhex" \
$struct_val "intstruct"
+}
-gdb_test "print zero_all ()" ""
+gdb_test "print zero_all ()" ".*"
-test_restore_saved_value "intarr1.bin binary $array_start" \
+test_restore_saved_value "[set intarr1.bin] binary $array_start" \
"array as value, binary" \
$array_val "intarray"
-test_restore_saved_value "intstr1.bin binary $struct_start" \
+test_restore_saved_value "[set intstr1.bin] binary $struct_start" \
"struct as value, binary" \
$struct_val "intstruct"
-gdb_test "print zero_all ()" ""
+gdb_test "print zero_all ()" ".*"
-test_restore_saved_value "intarr2.bin binary $array_start" \
+test_restore_saved_value "[set intarr2.bin] binary $array_start" \
"array as memory, binary" \
$array_val "intarray"
-test_restore_saved_value "intstr2.bin binary $struct_start" \
+test_restore_saved_value "[set intstr2.bin] binary $struct_start" \
"struct as memory, binary" \
$struct_val "intstruct"
set array2_start [capture_value "/x &intarray2\[0\]"]
set struct2_start [capture_value "/x &intstruct2"]
set array2_offset \
- [capture_value "/x (char *) &intarray2 - (char *) &intarray"]
+ [capture_value "(char *) &intarray2 - (char *) &intarray"]
set struct2_offset \
- [capture_value "/x (char *) &intstruct2 - (char *) &intstruct"]
+ [capture_value "(char *) &intstruct2 - (char *) &intstruct"]
-gdb_test "print zero_all ()" ""
+gdb_test "print zero_all ()" ".*"
-test_restore_saved_value "intarr1.srec $array2_offset" \
+
+if ![string compare $is64bitonly "no"] then {
+ test_restore_saved_value "[set intarr1.srec] $array2_offset" \
"array copy, srec" \
$array_val "intarray2"
-test_restore_saved_value "intstr1.srec $struct2_offset" \
+ test_restore_saved_value "[set intstr1.srec] $struct2_offset" \
"struct copy, srec" \
$struct_val "intstruct2"
-gdb_test "print zero_all ()" ""
+ gdb_test "print zero_all ()" ".*"
-test_restore_saved_value "intarr1.ihex $array2_offset" \
+ test_restore_saved_value "[set intarr1.ihex] $array2_offset" \
"array copy, ihex" \
$array_val "intarray2"
-test_restore_saved_value "intstr1.ihex $struct2_offset" \
+ test_restore_saved_value "[set intstr1.ihex] $struct2_offset" \
"struct copy, ihex" \
$struct_val "intstruct2"
-gdb_test "print zero_all ()" ""
+ gdb_test "print zero_all ()" ".*"
-test_restore_saved_value "intarr1.tekhex $array2_offset" \
+ test_restore_saved_value "[set intarr1.tekhex] $array2_offset" \
"array copy, tekhex" \
$array_val "intarray2"
-test_restore_saved_value "intstr1.tekhex $struct2_offset" \
+ test_restore_saved_value "[set intstr1.tekhex] $struct2_offset" \
"struct copy, tekhex" \
$struct_val "intstruct2"
+}
-gdb_test "print zero_all ()" ""
+gdb_test "print zero_all ()" ".*"
-test_restore_saved_value "intarr1.bin binary $array2_start" \
+test_restore_saved_value "[set intarr1.bin] binary $array2_start" \
"array copy, binary" \
$array_val "intarray2"
-test_restore_saved_value "intstr1.bin binary $struct2_start" \
+test_restore_saved_value "[set intstr1.bin] binary $struct2_start" \
"struct copy, binary" \
$struct_val "intstruct2"
set element4_offset \
[capture_value "/x (char *) &intarray\[4\] - (char *) &intarray\[0\]"]
-gdb_test "print zero_all ()" ""
+if ![string compare $is64bitonly "no"] then {
+ gdb_test "print zero_all ()" ".*"
-test_restore_saved_value "intarr1.srec 0 $element3_start $element4_start" \
- "array partial, srec" \
- [capture_value "4"] "intarray\[3\]"
+ test_restore_saved_value "[set intarr1.srec] 0 $element3_start $element4_start" \
+ "array partial, srec" 4 "intarray\[3\]"
-gdb_test "print intarray\[2\] == 0" " = 1" "element 2 not changed - 1"
-gdb_test "print intarray\[4\] == 0" " = 1" "element 4 not changed - 1"
+ gdb_test "print intarray\[2\] == 0" " = 1" "element 2 not changed - 1"
+ gdb_test "print intarray\[4\] == 0" " = 1" "element 4 not changed - 1"
-gdb_test "print zero_all ()" ""
+ gdb_test "print zero_all ()" ".*"
-test_restore_saved_value "intarr1.ihex 0 $element3_start $element4_start" \
- "array partial, ihex" \
- [capture_value "4"] "intarray\[3\]"
+ test_restore_saved_value "[set intarr1.ihex] 0 $element3_start $element4_start" \
+ "array partial, ihex" 4 "intarray\[3\]"
-gdb_test "print intarray\[2\] == 0" " = 1" "element 2 not changed - 2"
-gdb_test "print intarray\[4\] == 0" " = 1" "element 4 not changed - 2"
+ gdb_test "print intarray\[2\] == 0" " = 1" "element 2 not changed - 2"
+ gdb_test "print intarray\[4\] == 0" " = 1" "element 4 not changed - 2"
-gdb_test "print zero_all ()" ""
+ gdb_test "print zero_all ()" ".*"
-test_restore_saved_value "intarr1.tekhex 0 $element3_start $element4_start" \
- "array partial, tekhex" \
- [capture_value "4"] "intarray\[3\]"
+ test_restore_saved_value "[set intarr1.tekhex] 0 $element3_start $element4_start" \
+ "array partial, tekhex" 4 "intarray\[3\]"
-gdb_test "print intarray\[2\] == 0" " = 1" "element 2 not changed - 3"
-gdb_test "print intarray\[4\] == 0" " = 1" "element 4 not changed - 3"
+ gdb_test "print intarray\[2\] == 0" " = 1" "element 2 not changed - 3"
+ gdb_test "print intarray\[4\] == 0" " = 1" "element 4 not changed - 3"
+}
-gdb_test "print zero_all ()" ""
+gdb_test "print zero_all ()" ".*"
test_restore_saved_value \
- "intarr1.bin binary $array_start $element3_offset $element4_offset" \
- "array partial, binary" \
- [capture_value "4"] "intarray\[3\]"
+ "[set intarr1.bin] binary $array_start $element3_offset $element4_offset" \
+ "array partial, binary" 4 "intarray\[3\]"
gdb_test "print intarray\[2\] == 0" " = 1" "element 2 not changed - 4"
gdb_test "print intarray\[4\] == 0" " = 1" "element 4 not changed - 4"
-gdb_test "print zero_all ()" "" ""
+if ![string compare $is64bitonly "no"] then {
+ gdb_test "print zero_all ()" ".*" ""
-# restore with expressions
-test_restore_saved_value \
- "intarr3.srec ${array2_start}-${array_start} &intarray\[3\] &intarray\[4\]" \
- "array partial with expressions" \
- [capture_value "4"] "intarray2\[3\]"
+ # restore with expressions
+ test_restore_saved_value \
+ "[set intarr3.srec] (char*)${array2_start}-(char*)${array_start} &intarray\[3\] &intarray\[4\]" \
+ "array partial with expressions" 4 "intarray2\[3\]"
-gdb_test "print intarray2\[2\] == 0" " = 1" "element 2 not changed, == 4"
-gdb_test "print intarray2\[4\] == 0" " = 1" "element 4 not changed, == 4"
+ gdb_test "print intarray2\[2\] == 0" " = 1" "element 2 not changed, == 4"
+ gdb_test "print intarray2\[4\] == 0" " = 1" "element 4 not changed, == 4"
+}
-# clean up files
+# Now start a fresh gdb session, and reload the saved value files.
+
+gdb_exit
+gdb_start
+gdb_file_cmd ${binfile}
+
+# Now fix the endianness at the correct state.
+
+gdb_test_multiple "set endian $endian" "set endianness" {
+ -re ".* (big|little) endian.*$gdb_prompt $" {
+ pass "setting $endian endianness"
+ }
+}
+
+# Reload saved values one by one, and compare.
+
+if { ![string compare $array_val \
+ [capture_value "intarray" "file binfile; intarray"]] } then {
+ fail "start with intarray un-initialized"
+} else {
+ pass "start with intarray un-initialized"
+}
+
+if { ![string compare $struct_val \
+ [capture_value "intstruct" "file binfile; intstruct"]] } then {
+ fail "start with intstruct un-initialized"
+} else {
+ pass "start with intstruct un-initialized"
+}
-remote_exec build "rm -f intarr1.bin intarr1b.bin intarr1.ihex intarr1.srec intarr1.tekhex intarr2.bin intarr2b.bin intarr2.ihex intarr2.srec intarr2.tekhex intstr1.bin intstr1b.bin intstr1.ihex intstr1.srec intstr1.tekhex intstr2.bin intstr2b.bin intstr2.ihex intstr2.srec intstr2.tekhex intarr3.srec"
+proc test_reload_saved_value { filename msg oldval newval } {
+ global gdb_prompt
+
+ gdb_file_cmd $filename
+ if { ![string compare $oldval \
+ [capture_value $newval "$msg"]] } then {
+ pass "$msg; value restored ok"
+ } else {
+ fail "$msg; value restored ok"
+ }
+}
+
+# srec format can not be loaded for 64-bit-only platforms
+if ![string compare $is64bitonly "no"] then {
+ test_reload_saved_value "[set intarr1.srec]" "reload array as value, srec" \
+ $array_val "\*$array_ptr_type"
+ test_reload_saved_value "[set intstr1.srec]" "reload struct as value, srec" \
+ $struct_val "\*$struct_ptr_type"
+ test_reload_saved_value "[set intarr2.srec]" "reload array as memory, srec" \
+ $array_val "\*$array_ptr_type"
+ test_reload_saved_value "[set intstr2.srec]" "reload struct as memory, srec" \
+ $struct_val "\*$struct_ptr_type"
+}
+
+# ihex format can not be loaded for 64-bit-only platforms
+if ![string compare $is64bitonly "no"] then {
+
+ test_reload_saved_value "[set intarr1.ihex]" \
+ "reload array as value, intel hex" \
+ $array_val "\*$array_ptr_type"
+ test_reload_saved_value "[set intstr1.ihex]" \
+ "reload struct as value, intel hex" \
+ $struct_val "\*$struct_ptr_type"
+ test_reload_saved_value "[set intarr2.ihex]" \
+ "reload array as memory, intel hex" \
+ $array_val "\*$array_ptr_type"
+ test_reload_saved_value "[set intstr2.ihex]" \
+ "reload struct as memory, intel hex" \
+ $struct_val "\*$struct_ptr_type"
+}
+
+# tekhex format can not be loaded for 64-bit-only platforms
+if ![string compare $is64bitonly "no"] then {
+ test_reload_saved_value "[set intarr1.tekhex]" \
+ "reload array as value, tekhex" \
+ $array_val "\*$array_ptr_type"
+ test_reload_saved_value "[set intstr1.tekhex]" \
+ "reload struct as value, tekhex" \
+ $struct_val "\*$struct_ptr_type"
+ test_reload_saved_value "[set intarr2.tekhex]" \
+ "reload array as memory, tekhex" \
+ $array_val "\*$array_ptr_type"
+ test_reload_saved_value "[set intstr2.tekhex]" \
+ "reload struct as memory, tekhex" \
+ $struct_val "\*$struct_ptr_type"
+}
+
+# clean up files
+remote_exec host "rm -f $filenames"
projects / deliverable / binutils-gdb.git / blobdiff