-# Copyright (C) 1992, 1994, 1997 Free Software Foundation, Inc.
+# Copyright 1992-2016 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
-#
+#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
-#
+#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-# Please email any bugs, comments, and/or additions to this file to:
-# bug-gdb@prep.ai.mit.edu
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
# This file was written by Michael Snyder (msnyder@cygnus.com)
-if $tracelevel then {
- strace $tracelevel
-}
-set prms_id 0
-set bug_id 0
+standard_testfile .c
-set testfile "setshow"
-set srcfile ${srcdir}/${subdir}/${testfile}.c
-set binfile ${objdir}/${subdir}/${testfile}
-if { [gdb_compile ${srcfile} ${binfile} executable {debug}] != "" } {
- perror "Couldn't compile ${srcfile}"
- return -1
+if { [gdb_compile ${srcdir}/${subdir}/${srcfile} ${binfile} executable {debug}] != "" } {
+ untested "failed to compile"
+ return -1
}
# Start with a fresh gdb
-gdb_exit
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
+clean_restart ${binfile}
+
+# make sure $pc is sane, in case we're talking to a board.
+if { ![runto_main] } {
+ gdb_suppress_tests
+}
#
# Test gdb set and show commands.
gdb_test "show annotate" "Annotation_level is 0..*" "default annotation_level is zero"
#test set annotate 2
-send_gdb "set annotate 2\n"
-gdb_expect {
- -re ".*\032\032pre-prompt.*$gdb_prompt .*\032\032prompt.*$" \
- { pass "set annotate 2" }
- -re ".*$gdb_prompt $" { fail "set annotate 2" }
- timeout { fail "(timeout) set annotate 2" }
+
+# Here we need to fiddle with prompts.
+set old_gdb_prompt $gdb_prompt
+set gdb_prompt "\r\n\032\032pre-prompt\r\n$gdb_prompt \r\n\032\032prompt\r\n"
+
+gdb_test_multiple "set annotate 2" "set annotate 2" {
+ -re "\r\n$gdb_prompt$" {
+ pass "set annotate 2"
}
+}
-send_gdb "show annotate\n"
-gdb_expect {
- -re ".*\032\032post-prompt.*Annotation_level is 2..*\032\032pre-prompt.*$gdb_prompt .*\032\032prompt.*$" \
- { pass "show annotate (2)" }
- -re ".*$gdb_prompt $" { fail "show annotate (2)" }
- timeout { fail "(timeout) show annotate (2)" }
+gdb_test_multiple "show annotate" "show annotate 2" {
+ -re ".*\032\032post-prompt.*Annotation_level is 2..*\032\032pre-prompt.*$old_gdb_prompt .*\032\032prompt.*$" {
+ pass "show annotate 2"
}
+}
#test annotation_level 2
-send_gdb "info line 1\n"
-gdb_expect {
- -re ".*\032\032post-prompt.*Line 1 of .* is at address .* but contains no code.*:1:0:beg:0x.*\032\032pre-prompt.*$gdb_prompt .*\032\032prompt.*$" \
- { pass "annotation_level 2" }
- -re ".*$gdb_prompt $" { fail "annotation_level 2" }
- timeout { fail "(timeout) annotation_level 2" }
+gdb_test_multiple "info line 1" "annotation_level 2" {
+ -re ".*\032\032post-prompt.*Line 1 of .* is at address .* but contains no code.*:1:0:beg:0x.*\032\032pre-prompt.*$old_gdb_prompt .*\032\032prompt.*$" {
+ pass "annotation_level 2"
}
+}
+
+# Restore the original prompt for the rest of the testsuite.
+set gdb_prompt $old_gdb_prompt
#test set annotate 1
gdb_test "set annotate 1" ".*post-prompt.*" "set annotate 1"
#test annotation_level 1
gdb_test "info line 1" "Line 1 of .* is at address .* but contains no code.*:1:0:beg:0x.*" "annotation_level 1"
#test set annotate 0
-gdb_test "set annotate 0" "" "set annotate 0"
+gdb_test_no_output "set annotate 0" "set annotate 0"
gdb_test "show annotate" "Annotation_level is 0..*" "show annotate (0)"
#test annotation_level 0
gdb_test "info line 1" "Line 1 of .* is at address .* but contains no code.*" "annotation_level 0"
+
+gdb_test_no_output "set args ~"
+gdb_test "show args" "Argument list to give program being debugged when it is started is \"~\"..*" \
+ "show args ~"
#test set args
-gdb_test "set args foo bar blup baz bubble" "" "set args"
+gdb_test_no_output "set args foo bar blup baz bubble" "set args"
#test show args
-gdb_test "show args" "Arguments to give program being debugged when it is started is \"foo bar blup baz bubble\"..*" "show args"
+gdb_test "show args" "Argument list to give program being debugged when it is started is \"foo bar blup baz bubble\"..*" "show args"
# Don't test if we can't pass args or if we're using a stub.
-if { ![target_info exists gdb,use_stub] && ![target_info exists noargs] } {
+if { !$use_gdb_stub && ![target_info exists noargs] } {
#test passing args
+ gdb_test "cont" "Continuing.*" "continuing"
+ delete_breakpoints
gdb_test "run" "Starting program:.*foo bar blup baz bubble.*" "passing args"
}
#test set check range on
-gdb_test "set check range on" "" "set check range on"
+gdb_test "set check range on" ".*" "set check range on"
#test show check range on
gdb_test "show check range" "Range checking is \"on\"\..*" "show check range (on)"
+#test set check range off with trailing space
+gdb_test_no_output "set check range off " "set check range off"
+#test show check range off
+gdb_test "show check range" "Range checking is \"off\"\..*" "show check range (off)"
#test set check range auto
-gdb_test "set check range auto" "" "set check range auto"
+gdb_test_no_output "set check range auto" "set check range auto"
#test show check range auto
-gdb_test "show check range" "Range checking is \"auto; currently .*" "show check range (auto)"
-#test set check type on
-gdb_test "set check type on" "" "set check type on"
-#test show check type on
-gdb_test "show check type" "Type checking is \"on\"..*" "show check type (on)"
-#test set check type auto
-gdb_test "set check type auto" "" "set check type auto"
-#test show check type
-gdb_test "show check type" "Type checking is \"auto; currently .*" "show check type (auto)"
+gdb_test "show check range" "Range checking is \"auto; currently .*" "show check range (auto)"
+
+# Test set check type on
+gdb_test "set check type on" ".*" "set check type on"
+
+# Test show check type on
+gdb_test "show check type" "Strict type checking is on\..*" \
+ "show check type (on)"
+
+# Test set check type off with trailing space
+gdb_test_no_output "set check type off " "set check type off"
+
+# Test show check type off
+gdb_test "show check type" "Strict type checking is off\..*" \
+ "show check type (off)"
+
#test set complaints 100
-gdb_test "set complaints 100" "" "set complaints 100"
+gdb_test_no_output "set complaints 100" "set complaints 100"
#test show complaints 100
gdb_test "show complaints" "Max number of complaints about incorrect symbols is 100..*" "show complaints (100)"
#test set complaints 0
-gdb_test "set complaints 0" "" "set complaints 0"
+gdb_test_no_output "set complaints 0" "set complaints 0"
#test show complaints 0
gdb_test "show complaints" "Max number of complaints about incorrect symbols is 0..*" "show complaints (0)"
#test set confirm off
-gdb_test "set confirm off" "" "set confirm off"
+gdb_test_no_output "set confirm off" "set confirm off"
#test show confirm off
gdb_test "show confirm" "Whether to confirm potentially dangerous operations is off..*" "show confirm (off)"
#test set confirm on
-gdb_test "set confirm on" "" "set confirm on"
+gdb_test_no_output "set confirm on" "set confirm on"
#test show confirm on
gdb_test "show confirm" "Whether to confirm potentially dangerous operations is on..*" "show confirm (on)"
#test set editing off
-gdb_test "set editing off" "" "set editing off"
+gdb_test_no_output "set editing off" "set editing off"
#test show editing off
gdb_test "show editing" "Editing of command lines as they are typed is off..*" "show editing (off)"
#test set editing on
-#gdb_test "set editing on" "" "set editing on"
+#gdb_test_no_output "set editing on" "set editing on"
#test show editing on
#gdb_test "show editing" "Editing of command lines as they are typed is on..*" "show editing (on)"
#test set environment FOOBARBAZ
-gdb_test "set environment FOOBARBAZ = grbxgrbxgrbx" "" "set environment FOOBARBAZ"
+gdb_test_no_output "set environment FOOBARBAZ = grbxgrbxgrbx" \
+ "set environment FOOBARBAZ"
#test show environment FOOBARBAZ
gdb_test "show environment FOOBARBAZ" "FOOBARBAZ = grbxgrbxgrbx.*" "show environment FOOBARBAZ"
#test set height 100
-gdb_test "set height 100" "" "set height 100"
+gdb_test_no_output "set height 100" "set height 100"
#test show height 100
gdb_test "show height" "Number of lines gdb thinks are in a page is 100..*" "show height"
+# Back to infinite height to avoid pagers. While at it, check that
+# literal "unlimited" works just as well as 0.
+gdb_test_no_output "set height unlimited"
#test set history expansion on
-gdb_test "set history expansion on" "" "set history expansion on"
+gdb_test_no_output "set history expansion on" "set history expansion on"
#test show history expansion on
gdb_test "show history expansion on" "History expansion on command input is on.*" "show history expansion"
+#get home directory path
+set HOME ""
+set test "show environment HOME"
+gdb_test_multiple $test $test {
+ -re "\nHOME = (\[^\r\n\]*)\[\r\n\]+$gdb_prompt $" {
+ set HOME $expect_out(1,string)
+ pass $test
+ }
+}
+#test set history filename ~/foobar.baz
+gdb_test_no_output "set history filename ~/foobar.baz" \
+ "set history filename ~/foobar.baz"
+#test show history filename ~/foobar.baz
+gdb_test "show history filename" \
+ "The filename in which to record the command history is \"[string_to_regexp $HOME]/foobar.baz\"..*" \
+ "show history filename (~/foobar.baz)"
+#get current working directory
+set PWD ""
+set test "show working directory"
+gdb_test_multiple "pwd" $test {
+ -re "\nWorking directory (\[^\r\n\]*)\\.\[\r\n\]+$gdb_prompt $" {
+ set PWD $expect_out(1,string)
+ pass $test
+ }
+}
#test set history filename foobar.baz
-gdb_test "set history filename foobar.baz" "" "set history filename foobar.baz"
+gdb_test_no_output "set history filename foobar.baz" \
+ "set history filename foobar.baz"
#test show history filename foobar.baz
-gdb_test "show history filename" "The filename in which to record the command history is \"foobar.baz\"..*" "show history filename (foobar.baz)"
+gdb_test "show history filename" \
+ "The filename in which to record the command history is \"[string_to_regexp $PWD]/foobar.baz\"..*" \
+ "show history filename (current_directory/foobar.baz)"
#test set history save on
-gdb_test "set history save on" "" "set history save on"
+gdb_test_no_output "set history save on" "set history save on"
#test show history save on
gdb_test "show history save" "Saving of the history record on exit is on..*" "show history save (on)"
+#history saving should stay disabled
+gdb_test_no_output "set history save off" "set history save off"
#test set history size 100
-gdb_test "set history size 100" "" "set history size 100"
+gdb_test_no_output "set history size 100" "set history size 100"
#test show history size 100
gdb_test "show history size" "The size of the command history is 100..*" "show history size (100)"
#test set language asm
-gdb_test "set language asm" "" "set language asm"
+gdb_test "set language asm" ".*" "set language asm"
#test show language asm
gdb_test "show language" "The current source language is \"asm\"..*" "show language (asm)"
+#test set language rust, with a trailing space
+gdb_test_no_output "set language rust " "set language rust"
+#test show language rust
+gdb_test "show language" "The current source language is \"rust\"..*" "show language (rust)"
+#test completion for set language.
+gdb_test "complete set language min" "set language minimal" \
+ "complete set language minimal"
#test set language auto
-gdb_test "set language auto" "" "set language auto"
+gdb_test_no_output "set language auto" "set language auto"
#test show language
gdb_test "show language" "The current source language is \"auto.*\"..*" "show language (auto)"
#test set listsize 100
-gdb_test "set listsize 100" "" "set listsize 100"
+gdb_test_no_output "set listsize 100" "set listsize 100"
#test show listsize 100
gdb_test "show listsize" "Number of source lines gdb will list by default is 100..*" "show listsize (100)"
if ![board_info target exists gdb_prompt] {
#test set prompt (FooBarBaz)
set newprompt "\\(FooBarBaz\\)"
- send_gdb "set prompt (FooBarBaz) \n"
- gdb_expect {
- -re "$newprompt $" { pass "set prompt (FooBarBaz) " }
- timeout { fail "(timeout) set prompt (FooBarBaz) " }
+
+ gdb_test_multiple "set prompt (FooBarBaz) " "set prompt FooBarBaz" {
+ -re "\[\r\n\]$newprompt $" {
+ pass "set prompt FooBarBaz"
+ }
}
#test show prompt (FooBarBaz)
- send_gdb "show prompt\n"
- gdb_expect {
- -re "Gdb's prompt is \"$newprompt \"..* $" \
- { pass "show prompt (FooBarBaz) " }
- timeout { fail "(timeout) show prompt (FooBarBaz) " }
+
+ gdb_test_multiple "show prompt" "show prompt FooBarBaz" {
+ -re "Gdb's prompt is \"$newprompt \"..* $" {
+ pass "show prompt FooBarBaz"
+ }
}
#test set prompt (gdb)
- send_gdb "set prompt (gdb) \n"
- gdb_expect {
- -re "$gdb_prompt $" { pass "set prompt (gdb) " }
- timeout { fail "(timeout) set prompt (gdb) " }
+
+ gdb_test_multiple "set prompt (gdb) " "set prompt gdb" {
+ -re "\[\r\n\]$gdb_prompt $" {
+ pass "set prompt gdb"
+ }
}
}
#test show radix 10
gdb_test "show radix" "Input and output radices set to decimal 10, hex a, octal 12..*" "show radix (10)"
#test set width 90
-gdb_test "set width 90" "" "set width 90"
+gdb_test_no_output "set width 90" "set width 90"
#test show width 90
gdb_test "show width" "Number of characters gdb thinks are in a line is 90..*" "show width (90)"
#test set write on
# This is only supported on targets which use exec.o.
-gdb_test "set write on" "" "set write on"
+gdb_test_no_output "set write on" "set write on"
#test show write on
# This is only supported on targets which use exec.o.
gdb_test "show write" "Writing into executable and core files is on..*" "show write (on)"
-#test set symbol-reloading on
-gdb_test "set symbol-reloading on" "" "set symbol-reloading on"
-#test show symbol-reloading on
-gdb_test "show symbol-reloading" "Dynamic symbol table reloading multiple times in one run is on..*" "show symbol-reloading (on)"
#test show user
-gdb_test "show user" "" "show user"
+gdb_test_no_output "show user" "show user"
#test set verbose on
-gdb_test "set verbose on" "" "set verbose on"
+gdb_test_no_output "set verbose on" "set verbose on"
#test show verbose on
gdb_test "show verbose" "Verbose printing of informational messages is on..*" "show verbose (on)"
#test set verbose off
-gdb_test "set verbose off" "" "set verbose off"
+gdb_test_no_output "set verbose off" "set verbose off"
#test show verbose off
gdb_test "show verbose" "Verbosity is off..*" "show verbose (off)"
+#test argument must be preceded by space
+foreach x {"history file" "solib-search-path" "data-directory"} {
+ foreach y {"/home/" "." "~/home" "=home"} {
+ gdb_test "set $x$y" "Argument must be preceded by space." \
+ "$x is not set to $y"
+ }
+}