-# Copyright (C) 1992, 1994, 1995, 1997, 1999 Free Software Foundation, Inc.
+# Copyright 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004
+# Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-# Please email any bugs, comments, and/or additions to this file to:
-# bug-gdb@prep.ai.mit.edu
-
# This file was written by Fred Fish. (fnf@cygnus.com)
# Generic gdb subroutines that should work for any target. If these
load_lib libgloss.exp
global GDB
-global CHILL_LIB
-global CHILL_RT0
-
-if ![info exists CHILL_LIB] {
- set CHILL_LIB [findfile $base_dir/../../gcc/ch/runtime/libchill.a "$base_dir/../../gcc/ch/runtime/libchill.a" [transform -lchill]]
-}
-verbose "using CHILL_LIB = $CHILL_LIB" 2
-if ![info exists CHILL_RT0] {
- set CHILL_RT0 [findfile $base_dir/../../gcc/ch/runtime/chillrt0.o "$base_dir/../../gcc/ch/runtime/chillrt0.o" ""]
-}
-verbose "using CHILL_RT0 = $CHILL_RT0" 2
if [info exists TOOL_EXECUTABLE] {
set GDB $TOOL_EXECUTABLE;
set gdb_prompt "\[(\]gdb\[)\]"
}
+# Needed for some tests under Cygwin.
+global EXEEXT
+global env
+
+if ![info exists env(EXEEXT)] {
+ set EXEEXT ""
+} else {
+ set EXEEXT $env(EXEEXT)
+}
+
### Only procedures should come after this point.
#
if [target_info exists gdb,do_reload_on_run] {
# Specifying no file, defaults to the executable
# currently being debugged.
- if { [gdb_load ""] < 0 } {
+ if { [gdb_load ""] != 0 } {
return;
}
send_gdb "continue\n";
send_gdb "y\n"
}
-re "The program is not being run.*$gdb_prompt $" {
- if { [gdb_load ""] < 0 } {
+ if { [gdb_load ""] != 0 } {
return;
}
send_gdb "jump *$start\n";
}
return
}
+
+ if [target_info exists gdb,do_reload_on_run] {
+ if { [gdb_load ""] != 0 } {
+ return;
+ }
+ }
send_gdb "run $args\n"
# This doesn't work quite right yet.
gdb_expect 60 {
}
}
-proc gdb_breakpoint { function } {
+# Set a breakpoint at FUNCTION. If there is an additional argument it is
+# a list of options; the only currently supported option is allow-pending.
+
+proc gdb_breakpoint { function args } {
global gdb_prompt
global decimal
+ set pending_response n
+ if {[lsearch -exact [lindex $args 0] allow-pending] != -1} {
+ set pending_response y
+ }
+
send_gdb "break $function\n"
# The first two regexps are what we get with -g, the third is without -g.
gdb_expect 30 {
-re "Breakpoint \[0-9\]* at .*: file .*, line $decimal.\r\n$gdb_prompt $" {}
-re "Breakpoint \[0-9\]*: file .*, line $decimal.\r\n$gdb_prompt $" {}
-re "Breakpoint \[0-9\]* at .*$gdb_prompt $" {}
+ -re "Breakpoint \[0-9\]* \\(.*\\) pending.*$gdb_prompt $" {
+ if {$pending_response == "n"} {
+ fail "setting breakpoint at $function"
+ return 0
+ }
+ }
+ -re "Make breakpoint pending.*y or \\\[n\\\]. $" {
+ send_gdb "$pending_response\n"
+ exp_continue
+ }
-re "$gdb_prompt $" { fail "setting breakpoint at $function" ; return 0 }
timeout { fail "setting breakpoint at $function (timeout)" ; return 0 }
}
# Since this is the only breakpoint that will be set, if it stops
# at a breakpoint, we will assume it is the one we want. We can't
# just compare to "function" because it might be a fully qualified,
-# single quoted C++ function specifier.
+# single quoted C++ function specifier. If there's an additional argument,
+# pass it to gdb_breakpoint.
-proc runto { function } {
+proc runto { function args } {
global gdb_prompt
global decimal
delete_breakpoints
- if ![gdb_breakpoint $function] {
+ if ![gdb_breakpoint $function [lindex $args 0]] {
return 0;
}
}
+# gdb_internal_error_resync:
+#
+# Answer the questions GDB asks after it reports an internal error
+# until we get back to a GDB prompt. Decline to quit the debugging
+# session, and decline to create a core file. Return non-zero if the
+# resync succeeds.
+#
+# This procedure just answers whatever questions come up until it sees
+# a GDB prompt; it doesn't require you to have matched the input up to
+# any specific point. However, it only answers questions it sees in
+# the output itself, so if you've matched a question, you had better
+# answer it yourself before calling this.
+#
+# You can use this function thus:
+#
+# gdb_expect {
+# ...
+# -re ".*A problem internal to GDB has been detected" {
+# gdb_internal_error_resync
+# }
+# ...
+# }
+#
+proc gdb_internal_error_resync {} {
+ global gdb_prompt
-# gdb_test COMMAND PATTERN MESSAGE -- send a command to gdb; test the result.
+ set count 0
+ while {$count < 10} {
+ gdb_expect {
+ -re "Quit this debugging session\\? \\(y or n\\) $" {
+ send_gdb "n\n"
+ incr count
+ }
+ -re "Create a core file of GDB\\? \\(y or n\\) $" {
+ send_gdb "n\n"
+ incr count
+ }
+ -re "$gdb_prompt $" {
+ # We're resynchronized.
+ return 1
+ }
+ timeout {
+ perror "Could not resync from internal error (timeout)"
+ return 0
+ }
+ }
+ }
+ perror "Could not resync from internal error (resync count exceeded)"
+ return 0
+}
+
+
+# gdb_test_multiple COMMAND MESSAGE EXPECT_ARGUMENTS
+# Send a command to gdb; test the result.
#
# COMMAND is the command to execute, send to GDB with send_gdb. If
# this is the null string no command is sent.
-# PATTERN is the pattern to match for a PASS, and must NOT include
-# the \r\n sequence immediately before the gdb prompt.
-# MESSAGE is an optional message to be printed. If this is
-# omitted, then the pass/fail messages use the command string as the
-# message. (If this is the empty string, then sometimes we don't
-# call pass or fail at all; I don't understand this at all.)
+# MESSAGE is a message to be printed with the built-in failure patterns
+# if one of them matches. If MESSAGE is empty COMMAND will be used.
+# EXPECT_ARGUMENTS will be fed to expect in addition to the standard
+# patterns. Pattern elements will be evaluated in the caller's
+# context; action elements will be executed in the caller's context.
+# Unlike patterns for gdb_test, these patterns should generally include
+# the final newline and prompt.
#
# Returns:
-# 1 if the test failed,
-# 0 if the test passes,
+# 1 if the test failed, according to a built-in failure pattern
+# 0 if only user-supplied patterns matched
# -1 if there was an internal error.
#
-proc gdb_test { args } {
+# You can use this function thus:
+#
+# gdb_test_multiple "print foo" "test foo" {
+# -re "expected output 1" {
+# pass "print foo"
+# }
+# -re "expected output 2" {
+# fail "print foo"
+# }
+# }
+#
+# The standard patterns, such as "Program exited..." and "A problem
+# ...", all being implicitly appended to that list.
+#
+proc gdb_test_multiple { command message user_code } {
global verbose
global gdb_prompt
global GDB
upvar timeout timeout
+ upvar expect_out expect_out
- if [llength $args]>2 then {
- set message [lindex $args 2]
- } else {
- set message [lindex $args 0]
+ if { $message == "" } {
+ set message $command
}
- set command [lindex $args 0]
- set pattern [lindex $args 1]
- if [llength $args]==5 {
- set question_string [lindex $args 3];
- set response_string [lindex $args 4];
- } else {
- set question_string "^FOOBAR$"
- }
+ # TCL/EXPECT WART ALERT
+ # Expect does something very strange when it receives a single braced
+ # argument. It splits it along word separators and performs substitutions.
+ # This means that { "[ab]" } is evaluated as "[ab]", but { "\[ab\]" } is
+ # evaluated as "\[ab\]". But that's not how TCL normally works; inside a
+ # double-quoted list item, "\[ab\]" is just a long way of representing
+ # "[ab]", because the backslashes will be removed by lindex.
+
+ # Unfortunately, there appears to be no easy way to duplicate the splitting
+ # that expect will do from within TCL. And many places make use of the
+ # "\[0-9\]" construct, so we need to support that; and some places make use
+ # of the "[func]" construct, so we need to support that too. In order to
+ # get this right we have to substitute quoted list elements differently
+ # from braced list elements.
+
+ # We do this roughly the same way that Expect does it. We have to use two
+ # lists, because if we leave unquoted newlines in the argument to uplevel
+ # they'll be treated as command separators, and if we escape newlines
+ # we mangle newlines inside of command blocks. This assumes that the
+ # input doesn't contain a pattern which contains actual embedded newlines
+ # at this point!
+
+ regsub -all {\n} ${user_code} { } subst_code
+ set subst_code [uplevel list $subst_code]
+
+ set processed_code ""
+ set patterns ""
+ set expecting_action 0
+ foreach item $user_code subst_item $subst_code {
+ if { $item == "-n" || $item == "-notransfer" || $item == "-nocase" } {
+ lappend processed_code $item
+ continue
+ }
+ if {$item == "-indices" || $item == "-re" || $item == "-ex"} {
+ lappend processed_code $item
+ continue
+ }
+ if { $expecting_action } {
+ lappend processed_code "uplevel [list $item]"
+ set expecting_action 0
+ # Cosmetic, no effect on the list.
+ append processed_code "\n"
+ continue
+ }
+ set expecting_action 1
+ lappend processed_code $subst_item
+ if {$patterns != ""} {
+ append patterns "; "
+ }
+ append patterns "\"$subst_item\""
+ }
+
+ # Also purely cosmetic.
+ regsub -all {\r} $patterns {\\r} patterns
+ regsub -all {\n} $patterns {\\n} patterns
if $verbose>2 then {
send_user "Sending \"$command\" to gdb\n"
- send_user "Looking to match \"$pattern\"\n"
+ send_user "Looking to match \"$patterns\"\n"
send_user "Message is \"$message\"\n"
}
# we need to set -notransfer expect option so that
# command output is not lost for pattern matching
# - guo
- gdb_expect -notransfer 2 {
- -re "\[\r\n\]" { }
- timeout { }
+ gdb_expect 2 {
+ -notransfer -re "\[\r\n\]" { verbose "partial: match" 3 }
+ timeout { verbose "partial: timeout" 3 }
}
set string [string range "$string" [expr $foo + 1] end];
} else {
}
}
- if [info exists timeout] {
- set tmt $timeout;
+ if [target_info exists gdb,timeout] {
+ set tmt [target_info gdb,timeout];
} else {
- global timeout;
if [info exists timeout] {
set tmt $timeout;
} else {
- set tmt 60;
+ global timeout;
+ if [info exists timeout] {
+ set tmt $timeout;
+ } else {
+ set tmt 60;
+ }
}
}
- gdb_expect $tmt {
+
+ set code {
+ -re ".*A problem internal to GDB has been detected" {
+ fail "$message (GDB internal error)"
+ gdb_internal_error_resync
+ }
-re "\\*\\*\\* DOSEXIT code.*" {
if { $message != "" } {
fail "$message";
}
gdb_suppress_entire_file "GDB died";
- return -1;
+ set result -1;
}
-re "Ending remote debugging.*$gdb_prompt $" {
if ![isnative] then {
gdb_start
set result -1
}
- -re "\[\r\n\]*($pattern)\[\r\n\]+$gdb_prompt $" {
- if ![string match "" $message] then {
- pass "$message"
- }
- set result 0
- }
- -re "(${question_string})$" {
- send_gdb "$response_string\n";
- exp_continue;
- }
+ }
+ append code $processed_code
+ append code {
-re "Undefined\[a-z\]* command:.*$gdb_prompt $" {
perror "Undefined command \"$command\"."
fail "$message"
}
-re "Program exited with code \[0-9\]+.*$gdb_prompt $" {
if ![string match "" $message] then {
- set errmsg "$message: the program exited"
+ set errmsg "$message (the program exited)"
} else {
- set errmsg "$command: the program exited"
+ set errmsg "$command (the program exited)"
}
fail "$errmsg"
- return -1
+ set result -1
+ }
+ -re "EXIT code \[0-9\r\n\]+Program exited normally.*$gdb_prompt $" {
+ if ![string match "" $message] then {
+ set errmsg "$message (the program exited)"
+ } else {
+ set errmsg "$command (the program exited)"
+ }
+ fail "$errmsg"
+ set result -1
}
-re "The program is not being run.*$gdb_prompt $" {
if ![string match "" $message] then {
- set errmsg "$message: the program is no longer running"
+ set errmsg "$message (the program is no longer running)"
} else {
- set errmsg "$command: the program is no longer running"
+ set errmsg "$command (the program is no longer running)"
}
fail "$errmsg"
- return -1
+ set result -1
}
- -re ".*$gdb_prompt $" {
+ -re "\r\n$gdb_prompt $" {
if ![string match "" $message] then {
fail "$message"
}
send_gdb "\n"
perror "Window too small."
fail "$message"
+ set result -1
}
-re "\\(y or n\\) " {
send_gdb "n\n"
perror "Got interactive prompt."
fail "$message"
+ set result -1
}
eof {
perror "Process no longer exists"
full_buffer {
perror "internal buffer is full."
fail "$message"
+ set result -1
}
timeout {
if ![string match "" $message] then {
set result 1
}
}
+
+ set result 0
+ set code [catch {gdb_expect $tmt $code} string]
+ if {$code == 1} {
+ global errorInfo errorCode;
+ return -code error -errorinfo $errorInfo -errorcode $errorCode $string
+ } elseif {$code == 2} {
+ return -code return $string
+ } elseif {$code == 3} {
+ return
+ } elseif {$code > 4} {
+ return -code $code $string
+ }
return $result
}
+
+# gdb_test COMMAND PATTERN MESSAGE QUESTION RESPONSE
+# Send a command to gdb; test the result.
+#
+# COMMAND is the command to execute, send to GDB with send_gdb. If
+# this is the null string no command is sent.
+# PATTERN is the pattern to match for a PASS, and must NOT include
+# the \r\n sequence immediately before the gdb prompt.
+# MESSAGE is an optional message to be printed. If this is
+# omitted, then the pass/fail messages use the command string as the
+# message. (If this is the empty string, then sometimes we don't
+# call pass or fail at all; I don't understand this at all.)
+# QUESTION is a question GDB may ask in response to COMMAND, like
+# "are you sure?"
+# RESPONSE is the response to send if QUESTION appears.
+#
+# Returns:
+# 1 if the test failed,
+# 0 if the test passes,
+# -1 if there was an internal error.
+#
+proc gdb_test { args } {
+ global verbose
+ global gdb_prompt
+ global GDB
+ upvar timeout timeout
+
+ if [llength $args]>2 then {
+ set message [lindex $args 2]
+ } else {
+ set message [lindex $args 0]
+ }
+ set command [lindex $args 0]
+ set pattern [lindex $args 1]
+
+ if [llength $args]==5 {
+ set question_string [lindex $args 3];
+ set response_string [lindex $args 4];
+ } else {
+ set question_string "^FOOBAR$"
+ }
+
+ return [gdb_test_multiple $command $message {
+ -re "\[\r\n\]*($pattern)\[\r\n\]+$gdb_prompt $" {
+ if ![string match "" $message] then {
+ pass "$message"
+ }
+ }
+ -re "(${question_string})$" {
+ send_gdb "$response_string\n";
+ exp_continue;
+ }
+ }]
+}
\f
# Test that a command gives an error. For pass or fail, return
# a 1 to indicate that more tests can proceed. However a timeout
pass "reject $sendthis"
return 1
}
+ -re "Unmatched single quote.*$gdb_prompt $" {
+ pass "reject $sendthis"
+ return 1
+ }
+ -re "A character constant must contain at least one character.*$gdb_prompt $" {
+ pass "reject $sendthis"
+ return 1
+ }
-re "$expectthis.*$gdb_prompt $" {
pass "reject $sendthis"
return 1
unset gdb_spawn_id
}
+# Load a file into the debugger.
+# The return value is 0 for success, -1 for failure.
+#
+# This procedure also set the global variable GDB_FILE_CMD_DEBUG_INFO
+# to one of these values:
#
-# load a file into the debugger.
-# return a -1 if anything goes wrong.
+# debug file was loaded successfully and has debug information
+# nodebug file was loaded successfully and has no debug information
+# fail file was not loaded
#
+# I tried returning this information as part of the return value,
+# but ran into a mess because of the many re-implementations of
+# gdb_load in config/*.exp.
+#
+# TODO: gdb.base/sepdebug.exp and gdb.stabs/weird.exp might be able to use
+# this if they can get more information set.
+
proc gdb_file_cmd { arg } {
+ global gdb_prompt
global verbose
- global loadpath
- global loadfile
global GDB
- global gdb_prompt
- upvar timeout timeout
+
+ # Set whether debug info was found.
+ # Default to "fail".
+ global gdb_file_cmd_debug_info
+ set gdb_file_cmd_debug_info "fail"
if [is_remote host] {
- set arg [remote_download host $arg];
+ set arg [remote_download host $arg]
if { $arg == "" } {
- error "download failed"
- return -1;
+ perror "download failed"
+ return -1
}
}
send_gdb "file $arg\n"
gdb_expect 120 {
+ -re "Reading symbols from.*no debugging symbols found.*done.*$gdb_prompt $" {
+ verbose "\t\tLoaded $arg into the $GDB with no debugging symbols"
+ set gdb_file_cmd_debug_info "nodebug"
+ return 0
+ }
-re "Reading symbols from.*done.*$gdb_prompt $" {
verbose "\t\tLoaded $arg into the $GDB"
- return 0
- }
- -re "has no symbol-table.*$gdb_prompt $" {
- perror "$arg wasn't compiled with \"-g\""
- return -1
+ set gdb_file_cmd_debug_info "debug"
+ return 0
}
-re "A program is being debugged already.*Kill it.*y or n. $" {
send_gdb "y\n"
- verbose "\t\tKilling previous program being debugged"
+ verbose "\t\tKilling previous program being debugged"
exp_continue
}
-re "Load new symbol table from \".*\".*y or n. $" {
gdb_expect 120 {
-re "Reading symbols from.*done.*$gdb_prompt $" {
verbose "\t\tLoaded $arg with new symbol table into $GDB"
- return 0
+ set gdb_file_cmd_debug_info "debug"
+ return 0
}
timeout {
perror "(timeout) Couldn't load $arg, other program already loaded."
- return -1
+ return -1
}
}
}
-re "No such file or directory.*$gdb_prompt $" {
- perror "($arg) No such file or directory\n"
- return -1
+ perror "($arg) No such file or directory"
+ return -1
}
-re "$gdb_prompt $" {
perror "couldn't load $arg into $GDB."
- return -1
+ return -1
}
timeout {
perror "couldn't load $arg into $GDB (timed out)."
- return -1
+ return -1
}
eof {
# This is an attempt to detect a core dump, but seems not to
# work. Perhaps we need to match .* followed by eof, in which
# gdb_expect does not seem to have a way to do that.
perror "couldn't load $arg into $GDB (end of file)."
- return -1
+ return -1
}
}
}
if { [istarget "h8300-*-*"] } {
return 1
}
+
+ # The C++ IO streams are too large for HC11/HC12 and are thus not
+ # available. The gdb C++ tests use them and don't compile.
+ if { [istarget "m6811-*-*"] } {
+ return 1
+ }
+ if { [istarget "m6812-*-*"] } {
+ return 1
+ }
return 0
}
-# * For crosses, the CHILL runtime doesn't build because it can't find
-# setjmp.h, stdio.h, etc.
-# * For AIX (as of 16 Mar 95), (a) there is no language code for
-# CHILL in output_epilog in gcc/config/rs6000/rs6000.c, (b) collect2
-# does not get along with AIX's too-clever linker.
-# * On Irix5, there is a bug whereby set of bool, etc., don't get
-# TYPE_LOW_BOUND for the bool right because force_to_range_type doesn't
-# work with stub types.
-# Lots of things seem to fail on the PA, and since it's not a supported
-# chill target at the moment, don't run the chill tests.
-
-proc skip_chill_tests {} {
- if ![info exists do_chill_tests] {
- return 1;
- }
- eval set skip_chill [expr ![isnative] || [istarget "*-*-aix*"] || [istarget "*-*-irix5*"] || [istarget "*-*-irix6*"] || [istarget "alpha-*-osf*"] || [istarget "hppa*-*-*"]]
- verbose "Skip chill tests is $skip_chill"
- return $skip_chill
+# Return a 1 if I don't even want to try to test FORTRAN.
+
+proc skip_fortran_tests {} {
+ return 0
}
# Skip all the tests in the file if you are not on an hppa running
return $skip_hp
}
+set compiler_info "unknown"
+set gcc_compiled 0
+set hp_cc_compiler 0
+set hp_aCC_compiler 0
+
+# Figure out what compiler I am using.
+#
+# BINFILE is a "compiler information" output file. This implementation
+# does not use BINFILE.
+#
+# ARGS can be empty or "C++". If empty, "C" is assumed.
+#
+# There are several ways to do this, with various problems.
+#
+# [ gdb_compile -E $ifile -o $binfile.ci ]
+# source $binfile.ci
+#
+# Single Unix Spec v3 says that "-E -o ..." together are not
+# specified. And in fact, the native compiler on hp-ux 11 (among
+# others) does not work with "-E -o ...". Most targets used to do
+# this, and it mostly worked, because it works with gcc.
+#
+# [ catch "exec $compiler -E $ifile > $binfile.ci" exec_output ]
+# source $binfile.ci
+#
+# This avoids the problem with -E and -o together. This almost works
+# if the build machine is the same as the host machine, which is
+# usually true of the targets which are not gcc. But this code does
+# not figure which compiler to call, and it always ends up using the C
+# compiler. Not good for setting hp_aCC_compiler. Targets
+# hppa*-*-hpux* and mips*-*-irix* used to do this.
+#
+# [ gdb_compile -E $ifile > $binfile.ci ]
+# source $binfile.ci
+#
+# dejagnu target_compile says that it supports output redirection,
+# but the code is completely different from the normal path and I
+# don't want to sweep the mines from that path. So I didn't even try
+# this.
+#
+# set cppout [ gdb_compile $ifile "" preprocess $args quiet ]
+# eval $cppout
+#
+# I actually do this for all targets now. gdb_compile runs the right
+# compiler, and TCL captures the output, and I eval the output.
+#
+# Unfortunately, expect logs the output of the command as it goes by,
+# and dejagnu helpfully prints a second copy of it right afterwards.
+# So I turn off expect logging for a moment.
+#
+# [ gdb_compile $ifile $ciexe_file executable $args ]
+# [ remote_exec $ciexe_file ]
+# [ source $ci_file.out ]
+#
+# I could give up on -E and just do this.
+# I didn't get desperate enough to try this.
+#
+# -- chastain 2004-01-06
+
proc get_compiler_info {binfile args} {
- # Create and source the file that provides information about the compiler
- # used to compile the test case.
- # Compiler_type can be null or c++. If null we assume c.
+ # For compiler.c and compiler.cc
global srcdir
- global subdir
- # These two come from compiler.c.
- global signed_keyword_not_used
- global gcc_compiled
- if {![istarget "hppa*-*-hpux*"]} {
- if { [llength $args] > 0 } {
- if {$args == "c++"} {
- if { [gdb_compile "${srcdir}/lib/compiler.cc" "${binfile}.ci" preprocess {}] != "" } {
- perror "Couldn't make ${binfile}.ci file"
- return 1;
- }
- }
+ # I am going to play with the log to keep noise out.
+ global outdir
+ global tool
+
+ # These come from compiler.c or compiler.cc
+ global compiler_info
+
+ # Legacy global data symbols.
+ global gcc_compiled
+ global hp_cc_compiler
+ global hp_aCC_compiler
+
+ # Choose which file to preprocess.
+ set ifile "${srcdir}/lib/compiler.c"
+ if { [llength $args] > 0 && [lindex $args 0] == "c++" } {
+ set ifile "${srcdir}/lib/compiler.cc"
+ }
+
+ # Run $ifile through the right preprocessor.
+ # Toggle gdb.log to keep the compiler output out of the log.
+ log_file
+ set cppout [ gdb_compile "${ifile}" "" preprocess [list "$args" quiet] ]
+ log_file -a "$outdir/$tool.log"
+
+ # Eval the output.
+ set unknown 0
+ foreach cppline [ split "$cppout" "\n" ] {
+ if { [ regexp "^#" "$cppline" ] } {
+ # line marker
+ } elseif { [ regexp "^\[\n\r\t \]*$" "$cppline" ] } {
+ # blank line
+ } elseif { [ regexp "^\[\n\r\t \]*set\[\n\r\t \]" "$cppline" ] } {
+ # eval this line
+ verbose "get_compiler_info: $cppline" 2
+ eval "$cppline"
} else {
- if { [gdb_compile "${srcdir}/lib/compiler.c" "${binfile}.ci" preprocess {}] != "" } {
- perror "Couldn't make ${binfile}.ci file"
- return 1;
- }
- }
- } else {
- if { [llength $args] > 0 } {
- if {$args == "c++"} {
- if { [eval gdb_preprocess \
- [list "${srcdir}/lib/compiler.cc" "${binfile}.ci"] \
- $args] != "" } {
- perror "Couldn't make ${binfile}.ci file"
- return 1;
- }
- }
- } elseif { $args != "f77" } {
- if { [eval gdb_preprocess \
- [list "${srcdir}/lib/compiler.c" "${binfile}.ci"] \
- $args] != "" } {
- perror "Couldn't make ${binfile}.ci file"
- return 1;
- }
+ # unknown line
+ verbose -log "get_compiler_info: $cppline"
+ set unknown 1
}
}
-
- uplevel \#0 { set gcc_compiled 0 }
- if { [llength $args] == 0 || $args != "f77" } {
- source ${binfile}.ci
+ # Reset to unknown compiler if any diagnostics happened.
+ if { $unknown } {
+ set compiler_info "unknown"
}
+ # Set the legacy symbols.
+ set gcc_compiled 0
+ set hp_cc_compiler 0
+ set hp_aCC_compiler 0
+ if { [regexp "^gcc-1-" "$compiler_info" ] } { set gcc_compiled 1 }
+ if { [regexp "^gcc-2-" "$compiler_info" ] } { set gcc_compiled 2 }
+ if { [regexp "^gcc-3-" "$compiler_info" ] } { set gcc_compiled 3 }
+ if { [regexp "^gcc-4-" "$compiler_info" ] } { set gcc_compiled 4 }
+ if { [regexp "^gcc-5-" "$compiler_info" ] } { set gcc_compiled 5 }
+ if { [regexp "^hpcc-" "$compiler_info" ] } { set hp_cc_compiler 1 }
+ if { [regexp "^hpacc-" "$compiler_info" ] } { set hp_aCC_compiler 1 }
+
+ # Log what happened.
+ verbose -log "get_compiler_info: $compiler_info"
+
# Most compilers will evaluate comparisons and other boolean
# operations to 0 or 1.
uplevel \#0 { set true 1 }
uplevel \#0 { set false 0 }
- uplevel \#0 { set hp_cc_compiler 0 }
- uplevel \#0 { set hp_aCC_compiler 0 }
- uplevel \#0 { set hp_f77_compiler 0 }
- uplevel \#0 { set hp_f90_compiler 0 }
- if { !$gcc_compiled && [istarget "hppa*-*-hpux*"] } {
- # Check for the HP compilers
- set compiler [lindex [split [get_compiler $args] " "] 0]
- catch "exec what $compiler" output
- if [regexp ".*HP aC\\+\\+.*" $output] {
- uplevel \#0 { set hp_aCC_compiler 1 }
- # Use of aCC results in boolean results being displayed as
- # "true" or "false"
- uplevel \#0 { set true true }
- uplevel \#0 { set false false }
- } elseif [regexp ".*HP C Compiler.*" $output] {
- uplevel \#0 { set hp_cc_compiler 1 }
- } elseif [regexp ".*HP-UX f77.*" $output] {
- uplevel \#0 { set hp_f77_compiler 1 }
- } elseif [regexp ".*HP-UX f90.*" $output] {
- uplevel \#0 { set hp_f90_compiler 1 }
- }
+ # Use of aCC results in boolean results being displayed as
+ # "true" or "false"
+ if { $hp_aCC_compiler } {
+ uplevel \#0 { set true true }
+ uplevel \#0 { set false false }
}
return 0;
}
-proc get_compiler {args} {
- global CC CC_FOR_TARGET CXX CXX_FOR_TARGET F77_FOR_TARGET
-
- if { [llength $args] == 0
- || ([llength $args] == 1 && [lindex $args 0] == "") } {
- set which_compiler "c"
- } else {
- if { $args =="c++" } {
- set which_compiler "c++"
- } elseif { $args =="f77" } {
- set which_compiler "f77"
- } else {
- perror "Unknown compiler type supplied to gdb_preprocess"
- return ""
- }
- }
-
- if [info exists CC_FOR_TARGET] {
- if {$which_compiler == "c"} {
- set compiler $CC_FOR_TARGET
- }
- }
-
- if [info exists CXX_FOR_TARGET] {
- if {$which_compiler == "c++"} {
- set compiler $CXX_FOR_TARGET
- }
- }
+proc test_compiler_info { {compiler ""} } {
+ global compiler_info
- if [info exists F77_FOR_TARGET] {
- if {$which_compiler == "f77"} {
- set compiler $F77_FOR_TARGET
- }
- }
+ # if no arg, return the compiler_info string
- if { ![info exists compiler] } {
- if { $which_compiler == "c" } {
- if {[info exists CC]} {
- set compiler $CC
- }
- }
- if { $which_compiler == "c++" } {
- if {[info exists CXX]} {
- set compiler $CXX
- }
- }
- if {![info exists compiler]} {
- set compiler [board_info [target_info name] compiler];
- if { $compiler == "" } {
- perror "get_compiler: No compiler found"
- return ""
- }
- }
- }
+ if [string match "" $compiler] {
+ if [info exists compiler_info] {
+ return $compiler_info
+ } else {
+ perror "No compiler info found."
+ }
+ }
- return $compiler
+ return [string match $compiler $compiler_info]
}
-proc gdb_preprocess {source dest args} {
- set compiler [get_compiler "$args"]
- if { $compiler == "" } {
- return 1
- }
+set gdb_wrapper_initialized 0
- set cmdline "$compiler -E $source > $dest"
+proc gdb_wrapper_init { args } {
+ global gdb_wrapper_initialized;
+ global gdb_wrapper_file;
+ global gdb_wrapper_flags;
- verbose "Invoking $compiler -E $source > $dest"
- verbose -log "Executing on local host: $cmdline" 2
- set status [catch "exec ${cmdline}" exec_output]
+ if { $gdb_wrapper_initialized == 1 } { return; }
- set result [prune_warnings $exec_output]
- regsub "\[\r\n\]*$" "$result" "" result;
- regsub "^\[\r\n\]*" "$result" "" result;
- if { $result != "" } {
- clone_output "gdb compile failed, $result"
+ if {[target_info exists needs_status_wrapper] && \
+ [target_info needs_status_wrapper] != "0"} {
+ set result [build_wrapper "testglue.o"];
+ if { $result != "" } {
+ set gdb_wrapper_file [lindex $result 0];
+ set gdb_wrapper_flags [lindex $result 1];
+ } else {
+ warning "Status wrapper failed to build."
+ }
}
- return $result;
+ set gdb_wrapper_initialized 1
}
proc gdb_compile {source dest type options} {
global GDB_TESTCASE_OPTIONS;
+ global gdb_wrapper_file;
+ global gdb_wrapper_flags;
+ global gdb_wrapper_initialized;
+
+ # Add platform-specific options if a shared library was specified using
+ # "shlib=librarypath" in OPTIONS.
+ set new_options ""
+ set shlib_found 0
+ foreach opt $options {
+ if [regexp {^shlib=(.*)} $opt dummy_var shlib_name] {
+ if [test_compiler_info "xlc-*"] {
+ # IBM xlc compiler doesn't accept shared library named other
+ # than .so: use "-Wl," to bypass this
+ lappend source "-Wl,$shlib_name"
+ } else {
+ lappend source $shlib_name
+ }
+ if {$shlib_found == 0} {
+ set shlib_found 1
+ if { ([test_compiler_info "gcc-*"]
+ && ([istarget "powerpc*-*-aix*"]
+ || [istarget "rs6000*-*-aix*"] )) } {
+ lappend options "additional_flags=-L${objdir}/${subdir}"
+ } elseif { [istarget "mips-sgi-irix*"] } {
+ lappend options "additional_flags=-rpath ${objdir}/${subdir}"
+ }
+ }
+ } else {
+ lappend new_options $opt
+ }
+ }
+ set options $new_options
if [target_info exists gdb_stub] {
set options2 { "additional_flags=-Dusestubs" }
verbose "options are $options"
verbose "source is $source $dest $type $options"
+ if { $gdb_wrapper_initialized == 0 } { gdb_wrapper_init }
+
+ if {[target_info exists needs_status_wrapper] && \
+ [target_info needs_status_wrapper] != "0" && \
+ [info exists gdb_wrapper_file]} {
+ lappend options "libs=${gdb_wrapper_file}"
+ lappend options "ldflags=${gdb_wrapper_flags}"
+ }
+
set result [target_compile $source $dest $type $options];
regsub "\[\r\n\]*$" "$result" "" result;
regsub "^\[\r\n\]*" "$result" "" result;
- if { $result != "" } {
+ if { $result != "" && [lsearch $options quiet] == -1} {
clone_output "gdb compile failed, $result"
}
return $result;
}
+
+# This is just like gdb_compile, above, except that it tries compiling
+# against several different thread libraries, to see which one this
+# system has.
+proc gdb_compile_pthreads {source dest type options} {
+ set built_binfile 0
+ set why_msg "unrecognized error"
+ foreach lib {-lpthreads -lpthread -lthread} {
+ # This kind of wipes out whatever libs the caller may have
+ # set. Or maybe theirs will override ours. How infelicitous.
+ set options_with_lib [concat $options [list libs=$lib quiet]]
+ set ccout [gdb_compile $source $dest $type $options_with_lib]
+ switch -regexp -- $ccout {
+ ".*no posix threads support.*" {
+ set why_msg "missing threads include file"
+ break
+ }
+ ".*cannot open -lpthread.*" {
+ set why_msg "missing runtime threads library"
+ }
+ ".*Can't find library for -lpthread.*" {
+ set why_msg "missing runtime threads library"
+ }
+ {^$} {
+ pass "successfully compiled posix threads test case"
+ set built_binfile 1
+ break
+ }
+ }
+ }
+ if {!$built_binfile} {
+ unsupported "Couldn't compile $source: ${why_msg}"
+ return -1
+ }
+}
+
+# Build a shared library from SOURCES. You must use get_compiler_info
+# first.
+
+proc gdb_compile_shlib {sources dest options} {
+ set obj_options $options
+
+ switch -glob [test_compiler_info] {
+ "xlc-*" {
+ lappend obj_options "additional_flags=-qpic"
+ }
+ "gcc-*" {
+ if { !([istarget "powerpc*-*-aix*"]
+ || [istarget "rs6000*-*-aix*"]) } {
+ lappend obj_options "additional_flags=-fpic"
+ }
+ }
+ default {
+ switch -glob [istarget] {
+ "hppa*-hp-hpux*" {
+ lappend obj_options "additional_flags=+z"
+ }
+ "mips-sgi-irix*" {
+ # Disable SGI compiler's implicit -Dsgi
+ lappend obj_options "additional_flags=-Usgi"
+ }
+ default {
+ # don't know what the compiler is...
+ }
+ }
+ }
+ }
+
+ set outdir [file dirname $dest]
+ set objects ""
+ foreach source $sources {
+ set sourcebase [file tail $source]
+ if {[gdb_compile $source "${outdir}/${sourcebase}.o" object $obj_options] != ""} {
+ return -1
+ }
+ lappend objects ${outdir}/${sourcebase}.o
+ }
+
+ if [istarget "hppa*-*-hpux*"] {
+ remote_exec build "ld -b ${objects} -o ${dest}"
+ } else {
+ set link_options $options
+ if [test_compiler_info "xlc-*"] {
+ lappend link_options "additional_flags=-qmkshrobj"
+ } else {
+ lappend link_options "additional_flags=-shared"
+ }
+ if {[gdb_compile "${objects}" "${dest}" executable $link_options] != ""} {
+ return -1
+ }
+ }
+}
+
+# This is just like gdb_compile_pthreads, above, except that we always add the
+# objc library for compiling Objective-C programs
+proc gdb_compile_objc {source dest type options} {
+ set built_binfile 0
+ set why_msg "unrecognized error"
+ foreach lib {-lobjc -lpthreads -lpthread -lthread solaris} {
+ # This kind of wipes out whatever libs the caller may have
+ # set. Or maybe theirs will override ours. How infelicitous.
+ if { $lib == "solaris" } {
+ set lib "-lpthread -lposix4"
+ }
+ if { $lib != "-lobjc" } {
+ set lib "-lobjc $lib"
+ }
+ set options_with_lib [concat $options [list libs=$lib quiet]]
+ set ccout [gdb_compile $source $dest $type $options_with_lib]
+ switch -regexp -- $ccout {
+ ".*no posix threads support.*" {
+ set why_msg "missing threads include file"
+ break
+ }
+ ".*cannot open -lpthread.*" {
+ set why_msg "missing runtime threads library"
+ }
+ ".*Can't find library for -lpthread.*" {
+ set why_msg "missing runtime threads library"
+ }
+ {^$} {
+ pass "successfully compiled objc with posix threads test case"
+ set built_binfile 1
+ break
+ }
+ }
+ }
+ if {!$built_binfile} {
+ unsupported "Couldn't compile $source: ${why_msg}"
+ return -1
+ }
+}
+
proc send_gdb { string } {
global suppress_flag;
if { $suppress_flag } {
#
proc gdb_expect { args } {
- # allow -notransfer expect flag specification,
- # used by gdb_test routine for multi-line commands.
- # packed with gtimeout when fed to remote_expect routine,
- # which is a hack but due to what looks like a res and orig
- # parsing problem in remote_expect routine (dejagnu/lib/remote.exp):
- # what's fed into res is not removed from orig.
- # - guo
- if { [lindex $args 0] == "-notransfer" } {
- set notransfer -notransfer;
- set args [lrange $args 1 end];
- } else {
- set notransfer "";
- }
-
if { [llength $args] == 2 && [lindex $args 0] != "-re" } {
set gtimeout [lindex $args 0];
set expcode [list [lindex $args 1]];
}
}
set code [catch \
- {uplevel remote_expect host "$gtimeout $notransfer" $expcode} string];
+ {uplevel remote_expect host $gtimeout $expcode} string];
if [info exists old_val] {
set remote_suppress_flag $old_val;
} else {
set ok 1
if { $suppress_flag } {
set ok 0
+ unresolved "${test}"
}
while { ${index} < [llength ${list}] } {
set pattern [lindex ${list} ${index}]
if { ${ok} } {
gdb_expect {
-re "${pattern}${sentinel}" {
- pass "${test}, pattern ${index} + sentinel"
+ # pass "${test}, pattern ${index} + sentinel"
}
-re "${sentinel}" {
- fail "${test}, pattern ${index} + sentinel"
+ fail "${test} (pattern ${index} + sentinel)"
set ok 0
}
+ -re ".*A problem internal to GDB has been detected" {
+ fail "${test} (GDB internal error)"
+ set ok 0
+ gdb_internal_error_resync
+ }
timeout {
- fail "${test}, pattern ${index} + sentinel (timeout)"
+ fail "${test} (pattern ${index} + sentinel) (timeout)"
set ok 0
}
}
} else {
- unresolved "${test}, pattern ${index} + sentinel"
+ # unresolved "${test}, pattern ${index} + sentinel"
}
} else {
if { ${ok} } {
gdb_expect {
-re "${pattern}" {
- pass "${test}, pattern ${index}"
+ # pass "${test}, pattern ${index}"
}
-re "${sentinel}" {
- fail "${test}, pattern ${index}"
+ fail "${test} (pattern ${index})"
+ set ok 0
+ }
+ -re ".*A problem internal to GDB has been detected" {
+ fail "${test} (GDB internal error)"
set ok 0
+ gdb_internal_error_resync
}
timeout {
- fail "${test}, pattern ${index} (timeout)"
+ fail "${test} (pattern ${index}) (timeout)"
set ok 0
}
}
} else {
- unresolved "${test}, pattern ${index}"
+ # unresolved "${test}, pattern ${index}"
}
}
}
if { ${ok} } {
+ pass "${test}"
return 0
} else {
return 1
#
# gdb_load -- load a file into the debugger.
-# return a -1 if anything goes wrong.
+# Many files in config/*.exp override this procedure.
#
proc gdb_load { arg } {
return [gdb_file_cmd $arg]
}
proc default_gdb_init { args } {
+ global gdb_wrapper_initialized
+
gdb_clear_suppressed;
+ # Make sure that the wrapper is rebuilt
+ # with the appropriate multilib option.
+ set gdb_wrapper_initialized 0
+
# Uh, this is lame. Really, really, really lame. But there's this *one*
# testcase that will fail in random places if we don't increase this.
match_max -d 20000
set debug_format "unknown"
send_gdb "info source\n"
gdb_expect 10 {
- -re "Compiled with (.*) debugging format.\r\n$gdb_prompt $" {
+ -re "Compiled with (.*) debugging format.\r\n.*$gdb_prompt $" {
set debug_format $expect_out(1,string)
verbose "debug format is $debug_format"
return 1;
}
}
+# Return true if FORMAT matches the debug format the current test was
+# compiled with. FORMAT is a shell-style globbing pattern; it can use
+# `*', `[...]', and so on.
+#
+# This function depends on variables set by `get_debug_format', above.
+
+proc test_debug_format {format} {
+ global debug_format
+
+ return [expr [string match $format $debug_format] != 0]
+}
+
# Like setup_xfail, but takes the name of a debug format (DWARF 1,
# COFF, stabs, etc). If that format matches the format that the
# current test was compiled with, then the next test is expected to
# fail for any target. Returns 1 if the next test or set of tests is
# expected to fail, 0 otherwise (or if it is unknown). Must have
# previously called get_debug_format.
-
proc setup_xfail_format { format } {
- global debug_format
+ set ret [test_debug_format $format];
- if [string match $debug_format $format] then {
+ if {$ret} then {
setup_xfail "*-*-*"
- return 1;
}
- return 0
-}
+ return $ret;
+}
proc gdb_step_for_stub { } {
global gdb_prompt;
}
}
-### gdb_get_line_number TEXT [FILE]
-###
-### Search the source file FILE, and return the line number of a line
-### containing TEXT. Use this function instead of hard-coding line
-### numbers into your test script.
-###
-### Specifically, this function uses GDB's "search" command to search
-### FILE for the first line containing TEXT, and returns its line
-### number. Thus, FILE must be a source file, compiled into the
-### executable you are running. If omitted, FILE defaults to the
-### value of the global variable `srcfile'; most test scripts set
-### `srcfile' appropriately at the top anyway.
-###
-### Use this function to keep your test scripts independent of the
-### exact line numbering of the source file. Don't write:
-###
-### send_gdb "break 20"
-###
-### This means that if anyone ever edits your test's source file,
-### your test could break. Instead, put a comment like this on the
-### source file line you want to break at:
-###
-### /* breakpoint spot: frotz.exp: test name */
-###
-### and then write, in your test script (which we assume is named
-### frotz.exp):
-###
-### send_gdb "break [gdb_get_line_number "frotz.exp: test name"]\n"
-###
-### (Yes, Tcl knows how to handle the nested quotes and brackets.
-### Try this:
-### $ tclsh
-### % puts "foo [lindex "bar baz" 1]"
-### foo baz
-### %
-### Tcl is quite clever, for a little stringy language.)
-
-proc gdb_get_line_number {text {file /omitted/}} {
- global gdb_prompt;
- global srcfile;
+# gdb_get_line_number TEXT [FILE]
+#
+# Search the source file FILE, and return the line number of the
+# first line containing TEXT. If no match is found, return -1.
+#
+# TEXT is a string literal, not a regular expression.
+#
+# The default value of FILE is "$srcdir/$subdir/$srcfile". If FILE is
+# specified, and does not start with "/", then it is assumed to be in
+# "$srcdir/$subdir". This is awkward, and can be fixed in the future,
+# by changing the callers and the interface at the same time.
+# In particular: gdb.base/break.exp, gdb.base/condbreak.exp,
+# gdb.base/ena-dis-br.exp.
+#
+# Use this function to keep your test scripts independent of the
+# exact line numbering of the source file. Don't write:
+#
+# send_gdb "break 20"
+#
+# This means that if anyone ever edits your test's source file,
+# your test could break. Instead, put a comment like this on the
+# source file line you want to break at:
+#
+# /* breakpoint spot: frotz.exp: test name */
+#
+# and then write, in your test script (which we assume is named
+# frotz.exp):
+#
+# send_gdb "break [gdb_get_line_number "frotz.exp: test name"]\n"
+#
+# (Yes, Tcl knows how to handle the nested quotes and brackets.
+# Try this:
+# $ tclsh
+# % puts "foo [lindex "bar baz" 1]"
+# foo baz
+# %
+# Tcl is quite clever, for a little stringy language.)
+#
+# ===
+#
+# The previous implementation of this procedure used the gdb search command.
+# This version is different:
+#
+# . It works with MI, and it also works when gdb is not running.
+#
+# . It operates on the build machine, not the host machine.
+#
+# . For now, this implementation fakes a current directory of
+# $srcdir/$subdir to be compatible with the old implementation.
+# This will go away eventually and some callers will need to
+# be changed.
+#
+# . The TEXT argument is literal text and matches literally,
+# not a regular expression as it was before.
+#
+# . State changes in gdb, such as changing the current file
+# and setting $_, no longer happen.
+#
+# After a bit of time we can forget about the differences from the
+# old implementation.
+#
+# --chastain 2004-08-05
- if {! [string compare $file /omitted/]} {
- set file $srcfile
+proc gdb_get_line_number { text { file "" } } {
+ global srcdir
+ global subdir
+ global srcfile
+
+ if { "$file" == "" } then {
+ set file "$srcfile"
+ }
+ if { ! [regexp "^/" "$file"] } then {
+ set file "$srcdir/$subdir/$file"
}
- set result -1;
- gdb_test "list ${file}:1,1" ".*" ""
- send_gdb "search ${text}\n"
- gdb_expect {
- -re "\[\r\n\]+(\[0-9\]+)\[ \t\].*${text}.*$gdb_prompt $" {
- set result $expect_out(1,string)
- }
- -re ".*$gdb_prompt $" {
- fail "find line number containing \"${text}\""
- }
- timeout {
- fail "find line number containing \"${text}\" (timeout)"
- }
+ if { [ catch { set fd [open "$file"] } message ] } then {
+ perror "$message"
+ return -1
}
- return $result;
+
+ set found -1
+ for { set line 1 } { 1 } { incr line } {
+ if { [ catch { set nchar [gets "$fd" body] } message ] } then {
+ perror "$message"
+ return -1
+ }
+ if { $nchar < 0 } then {
+ break
+ }
+ if { [string first "$text" "$body"] >= 0 } then {
+ set found $line
+ break
+ }
+ }
+
+ if { [ catch { close "$fd" } message ] } then {
+ perror "$message"
+ return -1
+ }
+
+ return $found
}
# gdb_continue_to_end:
# Don't bother to check the output of the program, that may be
# extremely tough for some remote systems.
gdb_test "continue"\
- "Continuing.\[\r\n0-9\]+Program exited normally\\..*"\
+ "Continuing.\[\r\n0-9\]+(... EXIT code 0\[\r\n\]+|Program exited normally\\.).*"\
"continue until exit at $mssg"
}
}
} else {
send_gdb "run\n"
gdb_expect {
+ -re "The program .* has been started already.*y or n. $" {
+ send_gdb "y\n"
+ exp_continue
+ }
-re "Starting program.*$gdb_prompt $"\
{pass "rerun to main" ; return 0}
-re "$gdb_prompt $"\
}
}
-# From dejagnu:
-# srcdir = testsuite src dir (e.g., devo/gdb/testsuite)
-# objdir = testsuite obj dir (e.g., gdb/testsuite)
-# subdir = subdir of testsuite (e.g., gdb.gdbtk)
-#
-# To gdbtk:
-# env(DEFS)=the "defs" files (e.g., devo/gdb/testsuite/gdb.gdbtk/defs)
-# env(SRCDIR)=directory containing the test code (e.g., *.test)
-# env(OBJDIR)=directory which contains any executables
-# (e.g., gdb/testsuite/gdb.gdbtk)
-proc gdbtk_start {test} {
- global verbose
- global GDB
- global GDBFLAGS
- global env srcdir subdir objdir
-
- gdb_stop_suppressing_tests;
-
- verbose "Starting $GDB -nx -q --tclcommand=$test"
-
- set real_test [which $test]
- if {$real_test == 0} {
- perror "$test is not found"
- exit 1
- }
+# Print a message and return true if a test should be skipped
+# due to lack of floating point suport.
- if {![is_remote host]} {
- if { [which $GDB] == 0 } {
- perror "$GDB does not exist."
- exit 1
+proc gdb_skip_float_test { msg } {
+ if [target_info exists gdb,skip_float_tests] {
+ verbose "Skipping test '$msg': no float tests.";
+ return 1;
}
- }
+ return 0;
+}
-
- set wd [pwd]
- cd $srcdir
- set abs_srcdir [pwd]
- cd [file join $abs_srcdir .. gdbtk library]
- set env(GDBTK_LIBRARY) [pwd]
- cd [file join $abs_srcdir .. .. tcl library]
- set env(TCL_LIBRARY) [pwd]
- cd [file join $abs_srcdir .. .. tk library]
- set env(TK_LIBRARY) [pwd]
- cd [file join $abs_srcdir .. .. tix library]
- set env(TIX_LIBRARY) [pwd]
- cd [file join $abs_srcdir .. .. itcl itcl library]
- set env(ITCL_LIBRARY) [pwd]
- cd [file join .. $abs_srcdir .. .. libgui library]
- set env(CYGNUS_GUI_LIBRARY) [pwd]
- cd $wd
- cd [file join $abs_srcdir $subdir]
- set env(DEFS) [file join [pwd] defs]
- cd $wd
- cd [file join $objdir $subdir]
- set env(OBJDIR) [pwd]
- cd $wd
-
- set env(SRCDIR) $abs_srcdir
- set env(GDBTK_VERBOSE) 1
- set env(GDBTK_LOGFILE) [file join $objdir gdb.log]
- set env(GDBTK_TEST_RUNNING) 1
- set err [catch {exec $GDB -nx -q --tclcommand=$test} res]
- if { $err } {
- perror "Execing $GDB failed: $res"
- exit 1;
- }
- return $res
+# Print a message and return true if a test should be skipped
+# due to lack of stdio support.
+
+proc gdb_skip_stdio_test { msg } {
+ if [target_info exists gdb,noinferiorio] {
+ verbose "Skipping test '$msg': no inferior i/o.";
+ return 1;
+ }
+ return 0;
}
-# gdbtk tests call this function to print out the results of the
-# tests. The argument is a proper list of lists of the form:
-# {status name description msg}. All of these things typically
-# come from the testsuite harness.
-proc gdbtk_analyze_results {results} {
- foreach test $results {
- set status [lindex $test 0]
- set name [lindex $test 1]
- set description [lindex $test 2]
- set msg [lindex $test 3]
-
- switch $status {
- PASS {
- pass "$description ($name)"
- }
+proc gdb_skip_bogus_test { msg } {
+ return 0;
+}
- FAIL {
- fail "$description ($name)"
- }
- ERROR {
- perror "$name"
- }
+# Note: the procedure gdb_gnu_strip_debug will produce an executable called
+# ${binfile}.dbglnk, which is just like the executable ($binfile) but without
+# the debuginfo. Instead $binfile has a .gnu_debuglink section which contains
+# the name of a idebuginfo only file. This file will be stored in the
+# gdb.base/.debug subdirectory.
- XFAIL {
- xfail "$description ($name)"
- }
+# Functions for separate debug info testing
- XPASS {
- xpass "$description ($name)"
- }
+# starting with an executable:
+# foo --> original executable
+
+# at the end of the process we have:
+# foo.stripped --> foo w/o debug info
+# .debug/foo.debug --> foo's debug info
+# foo --> like foo, but with a new .gnu_debuglink section pointing to foo.debug.
+
+# Return the name of the file in which we should stor EXEC's separated
+# debug info. EXEC contains the full path.
+proc separate_debug_filename { exec } {
+
+ # In a .debug subdirectory off the same directory where the testcase
+ # executable is going to be. Something like:
+ # <your-path>/gdb/testsuite/gdb.base/.debug/blah.debug.
+ # This is the default location where gdb expects to findi
+ # the debug info file.
+
+ set exec_dir [file dirname $exec]
+ set exec_file [file tail $exec]
+ set debug_dir [file join $exec_dir ".debug"]
+ set debug_file [file join $debug_dir "${exec_file}.debug"]
+
+ return $debug_file
+}
+
+
+proc gdb_gnu_strip_debug { dest } {
+
+ set debug_file [separate_debug_filename $dest]
+ set strip_to_file_program strip
+ set objcopy_program objcopy
+
+ # Make sure the directory that will hold the separated debug
+ # info actually exists.
+ set debug_dir [file dirname $debug_file]
+ if {! [file isdirectory $debug_dir]} {
+ file mkdir $debug_dir
}
- }
+
+ set debug_link [file tail $debug_file]
+ set stripped_file "${dest}.stripped"
+
+ # Get rid of the debug info, and store result in stripped_file
+ # something like gdb/testsuite/gdb.base/blah.stripped.
+ set result [catch "exec $strip_to_file_program --strip-debug ${dest} -o ${stripped_file}" output]
+ verbose "result is $result"
+ verbose "output is $output"
+ if {$result == 1} {
+ return 1
+ }
+
+ # Get rid of everything but the debug info, and store result in debug_file
+ # This will be in the .debug subdirectory, see above.
+ set result [catch "exec $strip_to_file_program --only-keep-debug ${dest} -o ${debug_file}" output]
+ verbose "result is $result"
+ verbose "output is $output"
+ if {$result == 1} {
+ return 1
+ }
+
+ # Link the two previous output files together, adding the .gnu_debuglink
+ # section to the stripped_file, containing a pointer to the debug_file,
+ # save the new file in dest.
+ # This will be the regular executable filename, in the usual location.
+ set result [catch "exec $objcopy_program --add-gnu-debuglink=${debug_file} ${stripped_file} ${dest}" output]
+ verbose "result is $result"
+ verbose "output is $output"
+ if {$result == 1} {
+ return 1
+ }
+
+ return 0
}
+
projects / deliverable / binutils-gdb.git / blobdiff