-# Copyright 1992-2017 Free Software Foundation, Inc.
+# Copyright 1992-2019 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
}
# A regexp that matches the pagination prompt.
-set pagination_prompt [string_to_regexp "---Type <return> to continue, or q <return> to quit---"]
+set pagination_prompt \
+ "--Type <RET> for more, q to quit, c to continue without paging--"
# The variable fullname_syntax_POSIX is a regexp which matches a POSIX
# absolute path ie. /foo/
}
}
+# Returns true iff the target supports using the "run" command.
+
+proc target_can_use_run_cmd {} {
+ if [target_info exists use_gdb_stub] {
+ # In this case, when we connect, the inferior is already
+ # running.
+ return 0
+ }
+
+ # Assume yes.
+ return 1
+}
+
# Generic run command.
#
# The second pattern below matches up to the first newline *only*.
return -1
}
+# Generic starti command. Return 0 if we could start the program, -1
+# if we could not.
+#
+# N.B. This function does not wait for gdb to return to the prompt,
+# that is the caller's responsibility.
+
+proc gdb_starti_cmd {args} {
+ global gdb_prompt use_gdb_stub
+
+ foreach command [gdb_init_commands] {
+ send_gdb "$command\n"
+ gdb_expect 30 {
+ -re "$gdb_prompt $" { }
+ default {
+ perror "gdb_init_command for target failed"
+ return -1
+ }
+ }
+ }
+
+ if $use_gdb_stub {
+ return -1
+ }
+
+ send_gdb "starti $args\n"
+ gdb_expect 60 {
+ -re "The program .* has been started already.*y or n. $" {
+ send_gdb "y\n"
+ exp_continue
+ }
+ -re "Starting program: \[^\r\n\]*" {
+ return 0
+ }
+ }
+ return -1
+}
+
# Set a breakpoint at FUNCTION. If there is an additional argument it is
# a list of options; the supported options are allow-pending, temporary,
-# message, no-message, and passfail.
+# message, no-message, passfail and qualified.
# The result is 1 for success, 0 for failure.
#
# Note: The handling of message vs no-message is messed up, but it's based
set break_message "Temporary breakpoint"
}
+ if {[lsearch -exact $args qualified] != -1} {
+ append break_command " -qualified"
+ }
+
set print_pass 0
set print_fail 1
set no_message_loc [lsearch -exact $args no-message]
}
}
append code $processed_code
+
+ # Reset the spawn id, in case the processed code used -i.
append code {
- # Reset the spawn id, in case the processed code used -i.
-i "$gdb_spawn_id"
+ }
+ append code {
-re "Ending remote debugging.*$gdb_prompt $" {
if ![isnative] then {
warning "Can`t communicate to remote target."
set result -1
}
- # Patterns below apply to any spawn id specified.
+ -i $gdb_spawn_id
+ eof {
+ perror "GDB process no longer exists"
+ set wait_status [wait -i $gdb_spawn_id]
+ verbose -log "GDB process exited with wait status $wait_status"
+ if { $message != "" } {
+ fail "$message"
+ }
+ return -1
+ }
+ }
+
+ # Now patterns that apply to any spawn id specified.
+ append code {
-i $any_spawn_id
eof {
perror "Process no longer exists"
}
}
+ # remote_expect calls the eof section if there is an error on the
+ # expect call. We already have eof sections above, and we don't
+ # want them to get called in that situation. Since the last eof
+ # section becomes the error section, here we define another eof
+ # section, but with an empty spawn_id list, so that it won't ever
+ # match.
+ append code {
+ -i "" eof {
+ # This comment is here because the eof section must not be
+ # the empty string, otherwise remote_expect won't realize
+ # it exists.
+ }
+ }
+
set result 0
set code [catch {gdb_expect $code} string]
if {$code == 1} {
}
return [gdb_test_multiple $command $message {
- -re "\[\r\n\]*($pattern)\[\r\n\]+$gdb_prompt $" {
+ -re "\[\r\n\]*(?:$pattern)\[\r\n\]+$gdb_prompt $" {
if ![string match "" $message] then {
pass "$message"
}
# This is useful when the sequence is long and contains ".*", a single
# regexp to match the entire output can get a timeout much easier.
#
-# COMMAND is the command to send.
+# COMMAND is the command to execute, send to GDB with send_gdb. If
+# this is the null string no command is sent.
# TEST_NAME is passed to pass/fail. COMMAND is used if TEST_NAME is "".
# EXPECTED_OUTPUT_LIST is a list of regexps of expected output, which are
# processed in order, and all must be present in the output.
set test_name $command
}
lappend expected_output_list ""; # implicit ".*" before gdb prompt
- send_gdb "$command\n"
+ if { $command != "" } {
+ send_gdb "$command\n"
+ }
return [gdb_expect_list $test_name "$gdb_prompt $" $expected_output_list]
}
send_gdb "file $arg\n"
gdb_expect 120 {
- -re "Reading symbols from.*LZMA support was disabled.*done.*$gdb_prompt $" {
+ -re "Reading symbols from.*LZMA support was disabled.*$gdb_prompt $" {
verbose "\t\tLoaded $arg into $GDB; .gnu_debugdata found but no LZMA available"
set gdb_file_cmd_debug_info "lzma"
return 0
}
- -re "Reading symbols from.*no debugging symbols found.*done.*$gdb_prompt $" {
+ -re "Reading symbols from.*no debugging symbols found.*$gdb_prompt $" {
verbose "\t\tLoaded $arg into $GDB with no debugging symbols"
set gdb_file_cmd_debug_info "nodebug"
return 0
}
- -re "Reading symbols from.*done.*$gdb_prompt $" {
+ -re "Reading symbols from.*$gdb_prompt $" {
verbose "\t\tLoaded $arg into $GDB"
set gdb_file_cmd_debug_info "debug"
return 0
-re "Load new symbol table from \".*\".*y or n. $" {
send_gdb "y\n"
gdb_expect 120 {
- -re "Reading symbols from.*done.*$gdb_prompt $" {
+ -re "Reading symbols from.*$gdb_prompt $" {
verbose "\t\tLoaded $arg with new symbol table into $GDB"
set gdb_file_cmd_debug_info "debug"
return 0
# Default gdb_start procedure.
proc default_gdb_start { } {
- global gdb_prompt pagination_prompt
+ global gdb_prompt
global gdb_spawn_id
global inferior_spawn_id
# When running over NFS, particularly if running many simultaneous
# tests on different hosts all using the same server, things can
# get really slow. Give gdb at least 3 minutes to start up.
- set loop_again 1
- while { $loop_again } {
- set loop_again 0
- gdb_expect 360 {
- -re "$pagination_prompt" {
- verbose "Hit pagination during startup. Pressing enter to continue."
- send_gdb "\n"
- set loop_again 1
- }
- -re "\[\r\n\]$gdb_prompt $" {
- verbose "GDB initialized."
- }
- -re "$gdb_prompt $" {
- perror "GDB never initialized."
- unset gdb_spawn_id
- return -1
- }
- timeout {
- perror "(timeout) GDB never initialized after 10 seconds."
- remote_close host
- unset gdb_spawn_id
- return -1
- }
+ gdb_expect 360 {
+ -re "\[\r\n\]$gdb_prompt $" {
+ verbose "GDB initialized."
+ }
+ -re "$gdb_prompt $" {
+ perror "GDB never initialized."
+ unset gdb_spawn_id
+ return -1
+ }
+ timeout {
+ perror "(timeout) GDB never initialized after 10 seconds."
+ remote_close host
+ unset gdb_spawn_id
+ return -1
}
}
proc skip_python_tests_prompt { prompt_regexp } {
global gdb_py_is_py3k
- global gdb_py_is_py24
gdb_test_multiple "python print ('test')" "verify python support" {
-re "not supported.*$prompt_regexp" {
-re "$prompt_regexp" {}
}
- set gdb_py_is_py24 0
gdb_test_multiple "python print (sys.version_info\[0\])" "check if python 3" {
-re "3.*$prompt_regexp" {
set gdb_py_is_py3k 1
set gdb_py_is_py3k 0
}
}
- if { $gdb_py_is_py3k == 0 } {
- gdb_test_multiple "python print (sys.version_info\[1\])" "check if python 2.4" {
- -re "\[45\].*$prompt_regexp" {
- set gdb_py_is_py24 1
- }
- -re ".*$prompt_regexp" {
- set gdb_py_is_py24 0
- }
- }
- }
return 0
}
}
}
+# Run tests in BODY with the current working directory (CWD) set to
+# DIR. When BODY is finished, restore the original CWD. Return the
+# result of BODY.
+#
+# This procedure doesn't check if DIR is a valid directory, so you
+# have to make sure of that.
+
+proc with_cwd { dir body } {
+ set saved_dir [pwd]
+ verbose -log "Switching to directory $dir (saved CWD: $saved_dir)."
+ cd $dir
+
+ set code [catch {uplevel 1 $body} result]
+
+ verbose -log "Switching back to $saved_dir."
+ cd $saved_dir
+
+ if {$code == 1} {
+ global errorInfo errorCode
+ return -code $code -errorinfo $errorInfo -errorcode $errorCode $result
+ } else {
+ return -code $code $result
+ }
+}
# Run tests in BODY with GDB prompt and variable $gdb_prompt set to
# PROMPT. When BODY is finished, restore GDB prompt and variable
return 0
}
- # Set up, compile, and execute a test program containing _Complex types.
- # Include the current process ID in the file names to prevent conflicts
- # with invocations for multiple testsuites.
- set src [standard_temp_file complex[pid].c]
- set exe [standard_temp_file complex[pid].x]
+ # Compile a test program containing _Complex types.
- gdb_produce_source $src {
+ return [gdb_can_simple_compile complex {
int main() {
_Complex float cf;
_Complex double cd;
_Complex long double cld;
return 0;
}
- }
-
- verbose "compiling testfile $src" 2
- set compile_flags {debug nowarnings quiet}
- set lines [gdb_compile $src $exe executable $compile_flags]
- file delete $src
- file delete $exe
-
- if ![string match "" $lines] then {
- verbose "testfile compilation failed, returning 0" 2
- set result 0
- } else {
- set result 1
- }
-
- return $result
+ } executable]
}
# Return 1 if GDB can get a type for siginfo from the target, otherwise
gdb_caching_proc is_elf_target {
set me "is_elf_target"
- set src [standard_temp_file is_elf_target[pid].c]
- set obj [standard_temp_file is_elf_target[pid].o]
-
- gdb_produce_source $src {
- int foo () {return 0;}
- }
-
- verbose "$me: compiling testfile $src" 2
- set lines [gdb_compile $src $obj object {quiet}]
-
- file delete $src
-
- if ![string match "" $lines] then {
- verbose "$me: testfile compilation failed, returning 0" 2
- return 0
+ set src { int foo () {return 0;} }
+ if {![gdb_simple_compile elf_target $src]} {
+ return 0
}
set fp_obj [open $obj "r"]
# This cannot be decided simply from looking at the target string,
# as it might depend on externally passed compiler options like -m64.
gdb_caching_proc is_ilp32_target {
- set me "is_ilp32_target"
-
- set src [standard_temp_file ilp32[pid].c]
- set obj [standard_temp_file ilp32[pid].o]
-
- gdb_produce_source $src {
+ return [gdb_can_simple_compile is_ilp32_target {
int dummy[sizeof (int) == 4
&& sizeof (void *) == 4
&& sizeof (long) == 4 ? 1 : -1];
- }
-
- verbose "$me: compiling testfile $src" 2
- set lines [gdb_compile $src $obj object {quiet}]
- file delete $src
- file delete $obj
-
- if ![string match "" $lines] then {
- verbose "$me: testfile compilation failed, returning 0" 2
- return 0
- }
-
- verbose "$me: returning 1" 2
- return 1
+ }]
}
# Return 1 if target is LP64.
# This cannot be decided simply from looking at the target string,
# as it might depend on externally passed compiler options like -m64.
gdb_caching_proc is_lp64_target {
- set me "is_lp64_target"
-
- set src [standard_temp_file lp64[pid].c]
- set obj [standard_temp_file lp64[pid].o]
-
- gdb_produce_source $src {
+ return [gdb_can_simple_compile is_lp64_target {
int dummy[sizeof (int) == 4
&& sizeof (void *) == 8
&& sizeof (long) == 8 ? 1 : -1];
- }
-
- verbose "$me: compiling testfile $src" 2
- set lines [gdb_compile $src $obj object {quiet}]
- file delete $src
- file delete $obj
-
- if ![string match "" $lines] then {
- verbose "$me: testfile compilation failed, returning 0" 2
- return 0
- }
-
- verbose "$me: returning 1" 2
- return 1
+ }]
}
# Return 1 if target has 64 bit addresses.
# This cannot be decided simply from looking at the target string,
# as it might depend on externally passed compiler options like -m64.
gdb_caching_proc is_64_target {
- set me "is_64_target"
-
- set src [standard_temp_file is64[pid].c]
- set obj [standard_temp_file is64[pid].o]
-
- gdb_produce_source $src {
+ return [gdb_can_simple_compile is_64_target {
int function(void) { return 3; }
int dummy[sizeof (&function) == 8 ? 1 : -1];
- }
-
- verbose "$me: compiling testfile $src" 2
- set lines [gdb_compile $src $obj object {quiet}]
- file delete $src
- file delete $obj
-
- if ![string match "" $lines] then {
- verbose "$me: testfile compilation failed, returning 0" 2
- return 0
- }
-
- verbose "$me: returning 1" 2
- return 1
+ }]
}
# Return 1 if target has x86_64 registers - either amd64 or x32.
return 0
}
- set me "is_amd64_regs_target"
-
- set src [standard_temp_file reg64[pid].s]
- set obj [standard_temp_file reg64[pid].o]
+ return [gdb_can_simple_compile is_amd64_regs_target {
+ int main (void) {
+ asm ("incq %rax");
+ asm ("incq %r15");
- set list {}
- foreach reg \
- {rax rbx rcx rdx rsi rdi rbp rsp r8 r9 r10 r11 r12 r13 r14 r15} {
- lappend list "\tincq %$reg"
+ return 0;
}
- gdb_produce_source $src [join $list \n]
-
- verbose "$me: compiling testfile $src" 2
- set lines [gdb_compile $src $obj object {quiet}]
- file delete $src
- file delete $obj
-
- if ![string match "" $lines] then {
- verbose "$me: testfile compilation failed, returning 0" 2
- return 0
- }
-
- verbose "$me: returning 1" 2
- return 1
+ }]
}
# Return 1 if this target is an x86 or x86-64 with -m32.
return 0
}
- set me "is_aarch32_target"
-
- set src [standard_temp_file aarch32[pid].s]
- set obj [standard_temp_file aarch32[pid].o]
-
set list {}
foreach reg \
{r0 r1 r2 r3} {
lappend list "\tmov $reg, $reg"
}
- gdb_produce_source $src [join $list \n]
-
- verbose "$me: compiling testfile $src" 2
- set lines [gdb_compile $src $obj object {quiet}]
- file delete $src
- file delete $obj
- if ![string match "" $lines] then {
- verbose "$me: testfile compilation failed, returning 0" 2
- return 0
- }
-
- verbose "$me: returning 1" 2
- return 1
+ return [gdb_can_simple_compile aarch32 [join $list \n]]
}
# Return 1 if this target is an aarch64, either lp64 or ilp32.
}
# Make sure we have a compiler that understands altivec.
- set compile_flags {debug nowarnings}
if [get_compiler_info] {
warning "Could not get compiler info"
return 1
}
if [test_compiler_info gcc*] {
- set compile_flags "$compile_flags additional_flags=-maltivec"
+ set compile_flags "additional_flags=-maltivec"
} elseif [test_compiler_info xlc*] {
- set compile_flags "$compile_flags additional_flags=-qaltivec"
+ set compile_flags "additional_flags=-qaltivec"
} else {
verbose "Could not compile with altivec support, returning 1" 2
return 1
}
- # Set up, compile, and execute a test program containing VMX instructions.
- # Include the current process ID in the file names to prevent conflicts
- # with invocations for multiple testsuites.
- set src [standard_temp_file vmx[pid].c]
- set exe [standard_temp_file vmx[pid].x]
-
- gdb_produce_source $src {
+ # Compile a test program containing VMX instructions.
+ set src {
int main() {
#ifdef __MACH__
asm volatile ("vor v0,v0,v0");
return 0;
}
}
-
- verbose "$me: compiling testfile $src" 2
- set lines [gdb_compile $src $exe executable $compile_flags]
- file delete $src
-
- if ![string match "" $lines] then {
- verbose "$me: testfile compilation failed, returning 1" 2
+ if {![gdb_simple_compile $me $src executable $compile_flags]} {
return 1
}
- # No error message, compilation succeeded so now run it via gdb.
+ # Compilation succeeded so now run it via gdb.
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
- gdb_load "$exe"
+ gdb_load "$obj"
gdb_run_cmd
gdb_expect {
-re ".*Illegal instruction.*${gdb_prompt} $" {
}
}
gdb_exit
- remote_file build delete $exe
+ remote_file build delete $obj
verbose "$me: returning $skip_vmx_tests" 2
return $skip_vmx_tests
}
# Make sure we have a compiler that understands altivec.
- set compile_flags {debug nowarnings quiet}
if [get_compiler_info] {
warning "Could not get compiler info"
return 1
}
if [test_compiler_info gcc*] {
- set compile_flags "$compile_flags additional_flags=-mvsx"
+ set compile_flags "additional_flags=-mvsx"
} elseif [test_compiler_info xlc*] {
- set compile_flags "$compile_flags additional_flags=-qasm=gcc"
+ set compile_flags "additional_flags=-qasm=gcc"
} else {
verbose "Could not compile with vsx support, returning 1" 2
return 1
}
- set src [standard_temp_file vsx[pid].c]
- set exe [standard_temp_file vsx[pid].x]
-
- gdb_produce_source $src {
+ # Compile a test program containing VSX instructions.
+ set src {
int main() {
double a[2] = { 1.0, 2.0 };
#ifdef __MACH__
return 0;
}
}
-
- verbose "$me: compiling testfile $src" 2
- set lines [gdb_compile $src $exe executable $compile_flags]
- file delete $src
-
- if ![string match "" $lines] then {
- verbose "$me: testfile compilation failed, returning 1" 2
+ if {![gdb_simple_compile $me $src executable $compile_flags]} {
return 1
}
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
- gdb_load "$exe"
+ gdb_load "$obj"
gdb_run_cmd
gdb_expect {
-re ".*Illegal instruction.*${gdb_prompt} $" {
}
}
gdb_exit
- remote_file build delete $exe
+ remote_file build delete $obj
verbose "$me: returning $skip_vsx_tests" 2
return $skip_vsx_tests
set me "skip_tsx_tests"
- set src [standard_temp_file tsx[pid].c]
- set exe [standard_temp_file tsx[pid].x]
-
- gdb_produce_source $src {
- int main() {
- asm volatile ("xbegin .L0");
- asm volatile ("xend");
- asm volatile (".L0: nop");
- return 0;
- }
+ # Compile a test program.
+ set src {
+ int main() {
+ asm volatile ("xbegin .L0");
+ asm volatile ("xend");
+ asm volatile (".L0: nop");
+ return 0;
+ }
}
-
- verbose "$me: compiling testfile $src" 2
- set lines [gdb_compile $src $exe executable {nowarnings quiet}]
- file delete $src
-
- if ![string match "" $lines] then {
- verbose "$me: testfile compilation failed." 2
+ if {![gdb_simple_compile $me $src executable]} {
return 1
}
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
- gdb_load "$exe"
+ gdb_load "$obj"
gdb_run_cmd
gdb_expect {
-re ".*Illegal instruction.*${gdb_prompt} $" {
}
}
gdb_exit
- remote_file build delete $exe
+ remote_file build delete $obj
verbose "$me: returning $skip_tsx_tests" 2
return $skip_tsx_tests
return 1
}
- # Set up, compile, and execute a test program.
- # Include the current process ID in the file names to prevent conflicts
- # with invocations for multiple testsuites.
- set src [standard_temp_file btrace[pid].c]
- set exe [standard_temp_file btrace[pid].x]
-
- gdb_produce_source $src {
- int main(void) { return 0; }
- }
-
- verbose "$me: compiling testfile $src" 2
- set compile_flags {debug nowarnings quiet}
- set lines [gdb_compile $src $exe executable $compile_flags]
-
- if ![string match "" $lines] then {
- verbose "$me: testfile compilation failed, returning 1" 2
- file delete $src
- return 1
+ # Compile a test program.
+ set src { int main() { return 0; } }
+ if {![gdb_simple_compile $me $src executable]} {
+ return 0
}
# No error message, compilation succeeded so now run it via gdb.
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
- gdb_load $exe
+ gdb_load $obj
if ![runto_main] {
- file delete $src
return 1
}
- file delete $src
# In case of an unexpected output, we return 2 as a fail value.
set skip_btrace_tests 2
gdb_test_multiple "record btrace" "check btrace support" {
}
}
gdb_exit
- remote_file build delete $exe
+ remote_file build delete $obj
verbose "$me: returning $skip_btrace_tests" 2
return $skip_btrace_tests
return 1
}
- # Set up, compile, and execute a test program.
- # Include the current process ID in the file names to prevent conflicts
- # with invocations for multiple testsuites.
- set src [standard_temp_file btrace[pid].c]
- set exe [standard_temp_file btrace[pid].x]
-
- gdb_produce_source $src {
- int main(void) { return 0; }
- }
-
- verbose "$me: compiling testfile $src" 2
- set compile_flags {debug nowarnings quiet}
- set lines [gdb_compile $src $exe executable $compile_flags]
-
- if ![string match "" $lines] then {
- verbose "$me: testfile compilation failed, returning 1" 2
- file delete $src
- return 1
+ # Compile a test program.
+ set src { int main() { return 0; } }
+ if {![gdb_simple_compile $me $src executable]} {
+ return 0
}
# No error message, compilation succeeded so now run it via gdb.
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
- gdb_load $exe
+ gdb_load $obj
if ![runto_main] {
- file delete $src
return 1
}
- file delete $src
# In case of an unexpected output, we return 2 as a fail value.
set skip_btrace_tests 2
- gdb_test_multiple "record btrace pt" "check btrace support" {
+ gdb_test_multiple "record btrace pt" "check btrace pt support" {
-re "You can't do that when your target is.*\r\n$gdb_prompt $" {
set skip_btrace_tests 1
}
-re "Could not enable branch tracing.*\r\n$gdb_prompt $" {
set skip_btrace_tests 1
}
- -re "GDB does not support.*\r\n$gdb_prompt $" {
+ -re "support was disabled at compile time.*\r\n$gdb_prompt $" {
set skip_btrace_tests 1
}
-re "^record btrace pt\r\n$gdb_prompt $" {
}
}
gdb_exit
- remote_file build delete $exe
+ remote_file build delete $obj
verbose "$me: returning $skip_btrace_tests" 2
return $skip_btrace_tests
}
+# Run a test on the target to see if it supports Aarch64 SVE hardware.
+# Return 0 if so, 1 if it does not. Note this causes a restart of GDB.
+
+gdb_caching_proc skip_aarch64_sve_tests {
+ global srcdir subdir gdb_prompt inferior_exited_re
+
+ set me "skip_aarch64_sve_tests"
+
+ if { ![is_aarch64_target]} {
+ return 1
+ }
+
+ set compile_flags "{additional_flags=-march=armv8-a+sve}"
+
+ # Compile a test program containing SVE instructions.
+ set src {
+ int main() {
+ asm volatile ("ptrue p0.b");
+ return 0;
+ }
+ }
+ if {![gdb_simple_compile $me $src executable $compile_flags]} {
+ return 1
+ }
+
+ # Compilation succeeded so now run it via gdb.
+ clean_restart $obj
+ gdb_run_cmd
+ gdb_expect {
+ -re ".*Illegal instruction.*${gdb_prompt} $" {
+ verbose -log "\n$me sve hardware not detected"
+ set skip_sve_tests 1
+ }
+ -re ".*$inferior_exited_re normally.*${gdb_prompt} $" {
+ verbose -log "\n$me: sve hardware detected"
+ set skip_sve_tests 0
+ }
+ default {
+ warning "\n$me: default case taken"
+ set skip_sve_tests 1
+ }
+ }
+ gdb_exit
+ remote_file build delete $obj
+
+ verbose "$me: returning $skip_sve_tests" 2
+ return $skip_sve_tests
+}
+
+
+# A helper that compiles a test case to see if __int128 is supported.
+proc gdb_int128_helper {lang} {
+ return [gdb_can_simple_compile "i128-for-$lang" {
+ __int128 x;
+ int main() { return 0; }
+ } executable $lang]
+}
+
+# Return true if the C compiler understands the __int128 type.
+gdb_caching_proc has_int128_c {
+ return [gdb_int128_helper c]
+}
+
+# Return true if the C++ compiler understands the __int128 type.
+gdb_caching_proc has_int128_cxx {
+ return [gdb_int128_helper c++]
+}
+
+# Return true if the IFUNC feature is unsupported.
+gdb_caching_proc skip_ifunc_tests {
+ if [gdb_can_simple_compile ifunc {
+ extern void f_ ();
+ typedef void F (void);
+ F* g (void) { return &f_; }
+ void f () __attribute__ ((ifunc ("g")));
+ } object] {
+ return 0
+ } else {
+ return 1
+ }
+}
+
# Return whether we should skip tests for showing inlined functions in
# backtraces. Requires get_compiler_info and get_debug_format.
return $result
}
-# Helper for gdb_is_target_remote. PROMPT_REGEXP is the expected
-# prompt.
+# Helper for gdb_is_target_* procs. TARGET_NAME is the name of the target
+# we're looking for (used to build the test name). TARGET_STACK_REGEXP
+# is a regexp that will match the output of "maint print target-stack" if
+# the target in question is currently pushed. PROMPT_REGEXP is a regexp
+# matching the expected prompt after the command output.
-proc gdb_is_target_remote_prompt { prompt_regexp } {
-
- set test "probe for target remote"
+proc gdb_is_target_1 { target_name target_stack_regexp prompt_regexp } {
+ set test "probe for target ${target_name}"
gdb_test_multiple "maint print target-stack" $test {
- -re ".*emote serial target in gdb-specific protocol.*$prompt_regexp" {
+ -re "${target_stack_regexp}${prompt_regexp}" {
pass $test
return 1
}
return 0
}
+# Helper for gdb_is_target_remote where the expected prompt is variable.
+
+proc gdb_is_target_remote_prompt { prompt_regexp } {
+ return [gdb_is_target_1 "remote" ".*emote serial target in gdb-specific protocol.*" $prompt_regexp]
+}
+
# Check whether we're testing with the remote or extended-remote
# targets.
-proc gdb_is_target_remote {} {
+proc gdb_is_target_remote { } {
global gdb_prompt
return [gdb_is_target_remote_prompt "$gdb_prompt $"]
}
+# Check whether we're testing with the native target.
+
+proc gdb_is_target_native { } {
+ global gdb_prompt
+
+ return [gdb_is_target_1 "native" ".*native \\(Native process\\).*" "$gdb_prompt $"]
+}
+
# Return the effective value of use_gdb_stub.
#
# If the use_gdb_stub global has been set (it is set when the gdb process is
# We have to use -E and -o together, despite the comments
# above, because of how DejaGnu handles remote host testing.
set ppout "$outdir/compiler.i"
- gdb_compile "${ifile}" "$ppout" preprocess [list "$arg" quiet]
+ gdb_compile "${ifile}" "$ppout" preprocess [list "$arg" quiet getting_compiler_info]
set file [open $ppout r]
set cppout [read $file]
close $file
} else {
- set cppout [ gdb_compile "${ifile}" "" preprocess [list "$arg" quiet] ]
+ set cppout [ gdb_compile "${ifile}" "" preprocess [list "$arg" quiet getting_compiler_info] ]
}
eval log_file $saved_log
set gdb_wrapper_target [current_target_name]
}
+# Determine options that we always want to pass to the compiler.
+gdb_caching_proc universal_compile_options {
+ set me "universal_compile_options"
+ set options {}
+
+ set src [standard_temp_file ccopts[pid].c]
+ set obj [standard_temp_file ccopts[pid].o]
+
+ gdb_produce_source $src {
+ int foo(void) { return 0; }
+ }
+
+ # Try an option for disabling colored diagnostics. Some compilers
+ # yield colored diagnostics by default (when run from a tty) unless
+ # such an option is specified.
+ set opt "additional_flags=-fdiagnostics-color=never"
+ set lines [target_compile $src $obj object [list "quiet" $opt]]
+ if [string match "" $lines] then {
+ # Seems to have worked; use the option.
+ lappend options $opt
+ }
+ file delete $src
+ file delete $obj
+
+ verbose "$me: returning $options" 2
+ return $options
+}
+
+# Compile the code in $code to a file based on $name, using the flags
+# $compile_flag as well as debug, nowarning and quiet.
+# Return 1 if code can be compiled
+# Leave the file name of the resulting object in the upvar object.
+
+proc gdb_simple_compile {name code {type object} {compile_flags {}} {object obj}} {
+ upvar $object obj
+
+ switch -regexp -- $type {
+ "executable" {
+ set postfix "x"
+ }
+ "object" {
+ set postfix "o"
+ }
+ "preprocess" {
+ set postfix "i"
+ }
+ "assembly" {
+ set postfix "s"
+ }
+ }
+ set src [standard_temp_file $name-[pid].c]
+ set obj [standard_temp_file $name-[pid].$postfix]
+ set compile_flags [concat $compile_flags {debug nowarnings quiet}]
+
+ gdb_produce_source $src $code
+
+ verbose "$name: compiling testfile $src" 2
+ set lines [gdb_compile $src $obj $type $compile_flags]
+
+ file delete $src
+
+ if ![string match "" $lines] then {
+ verbose "$name: compilation failed, returning 0" 2
+ return 0
+ }
+ return 1
+}
+
+# Compile the code in $code to a file based on $name, using the flags
+# $compile_flag as well as debug, nowarning and quiet.
+# Return 1 if code can be compiled
+# Delete all created files and objects.
+
+proc gdb_can_simple_compile {name code {type object} {compile_flags ""}} {
+ set ret [gdb_simple_compile $name $code $type $compile_flags temp_obj]
+ file delete $temp_obj
+ return $ret
+}
+
# Some targets need to always link a special object in. Save its path here.
global gdb_saved_set_unbuffered_mode_obj
set gdb_saved_set_unbuffered_mode_obj ""
# dynamically load libraries at runtime. For example, on Linux, this adds
# -ldl so that the test can use dlopen.
# - nowarnings: Inhibit all compiler warnings.
+# - pie: Force creation of PIE executables.
+# - nopie: Prevent creation of PIE executables.
#
# And here are some of the not too obscure options understood by DejaGnu that
# influence the compilation:
# Add platform-specific options if a shared library was specified using
# "shlib=librarypath" in OPTIONS.
- set new_options ""
+ set new_options {}
+ if {[lsearch -exact $options rust] != -1} {
+ # -fdiagnostics-color is not a rustcc option.
+ } else {
+ set new_options [universal_compile_options]
+ }
set shlib_found 0
set shlib_load 0
+ set getting_compiler_info 0
foreach opt $options {
- if [regexp {^shlib=(.*)} $opt dummy_var shlib_name] {
+ if {[regexp {^shlib=(.*)} $opt dummy_var shlib_name]
+ && $type == "executable"} {
if [test_compiler_info "xlc-*"] {
# IBM xlc compiler doesn't accept shared library named other
# than .so: use "-Wl," to bypass this
lappend new_options "early_flags=-Wl,--no-as-needed"
}
}
- } elseif { $opt == "shlib_load" } {
+ } elseif { $opt == "shlib_load" && $type == "executable" } {
set shlib_load 1
+ } elseif { $opt == "getting_compiler_info" } {
+ # If this is set, calling test_compiler_info will cause recursion.
+ set getting_compiler_info 1
} else {
lappend new_options $opt
}
}
+ # Ensure stack protector is disabled for GCC, as this causes problems with
+ # DWARF line numbering.
+ # See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=88432
+ # This option defaults to on for Debian/Ubuntu.
+ if { $getting_compiler_info == 0
+ && [test_compiler_info {gcc-*-*}]
+ && !([test_compiler_info {gcc-[0-3]-*}]
+ || [test_compiler_info {gcc-4-0-*}]) } {
+ # Put it at the front to not override any user-provided value.
+ lappend new_options "early_flags=-fno-stack-protector"
+ }
+
# Because we link with libraries using their basename, we may need
# (depending on the platform) to set a special rpath value, to allow
# the executable to find the libraries it depends on.
set options [lreplace $options $nowarnings $nowarnings $flag]
}
+ # Replace the "pie" option with the appropriate compiler and linker flags
+ # to enable PIE executables.
+ set pie [lsearch -exact $options pie]
+ if {$pie != -1} {
+ if [target_info exists gdb,pie_flag] {
+ set flag "additional_flags=[target_info gdb,pie_flag]"
+ } else {
+ # For safety, use fPIE rather than fpie. On AArch64, m68k, PowerPC
+ # and SPARC, fpie can cause compile errors due to the GOT exceeding
+ # a maximum size. On other architectures the two flags are
+ # identical (see the GCC manual). Note Debian9 and Ubuntu16.10
+ # onwards default GCC to using fPIE. If you do require fpie, then
+ # it can be set using the pie_flag.
+ set flag "additional_flags=-fPIE"
+ }
+ set options [lreplace $options $pie $pie $flag]
+
+ if [target_info exists gdb,pie_ldflag] {
+ set flag "ldflags=[target_info gdb,pie_ldflag]"
+ } else {
+ set flag "ldflags=-pie"
+ }
+ lappend options "$flag"
+ }
+
+ # Replace the "nopie" option with the appropriate linker flag to disable
+ # PIE executables. There are no compiler flags for this option.
+ set nopie [lsearch -exact $options nopie]
+ if {$nopie != -1} {
+ if [target_info exists gdb,nopie_flag] {
+ set flag "ldflags=[target_info gdb,nopie_flag]"
+ } else {
+ set flag "ldflags=-no-pie"
+ }
+ set options [lreplace $options $nopie $nopie $flag]
+ }
+
if { $type == "executable" } {
if { ([istarget "*-*-mingw*"]
|| [istarget "*-*-*djgpp"]
# Copy the listed library to the target.
proc gdb_load_shlib { file } {
+ global gdb_spawn_id
+
+ if ![info exists gdb_spawn_id] {
+ perror "gdb_load_shlib: GDB is not running"
+ }
+
set dest [gdb_remote_download target [shlib_target_file $file]]
if {[is_remote target]} {
# read from this file.
setenv INPUTRC "/dev/null"
- # The gdb.base/readline.exp arrow key test relies on the standard VT100
- # bindings, so make sure that an appropriate terminal is selected.
- # The same bug doesn't show up if we use ^P / ^N instead.
- setenv TERM "vt100"
+ # This disables style output, which would interfere with many
+ # tests.
+ setenv TERM "dumb"
+
+ # Initialize GDB's pty with a fixed size, to make sure we avoid pagination
+ # during startup. See "man expect" for details about stty_init.
+ global stty_init
+ set stty_init "rows 25 cols 80"
# Some tests (for example gdb.base/maint.exp) shell out from gdb to use
# grep. Clear GREP_OPTIONS to make the behavior predictable,
gdb_caching_proc gdb_has_argv0 {
set result 0
- # Set up, compile, and execute a test program to check whether
- # argv[0] is available.
- set src [standard_temp_file has_argv0[pid].c]
- set exe [standard_temp_file has_argv0[pid].x]
-
- gdb_produce_source $src {
+ # Compile and execute a test program to check whether argv[0] is available.
+ gdb_simple_compile has_argv0 {
int main (int argc, char **argv) {
return 0;
}
- }
+ } executable
- gdb_compile $src $exe executable {debug}
# Helper proc.
proc gdb_has_argv0_1 { exe } {
return $retval
}
- set result [gdb_has_argv0_1 $exe]
+ set result [gdb_has_argv0_1 $obj]
gdb_exit
- file delete $src
- file delete $exe
+ file delete $obj
if { !$result
&& ([istarget *-*-linux*]
set val ${default}
gdb_test_multiple "print${fmt} ${exp}" "$test" {
- -re "\\$\[0-9\]* = (.*)\[\r\n\]*$gdb_prompt $" {
+ -re "\\$\[0-9\]* = (\[^\r\n\]*)\[\r\n\]*$gdb_prompt $" {
set val $expect_out(1,string)
- pass "$test ($val)"
+ pass "$test"
}
timeout {
fail "$test (timeout)"
gdb_test_multiple "print /d ${exp}" "$test" {
-re "\\$\[0-9\]* = (\[-\]*\[0-9\]*).*$gdb_prompt $" {
set val $expect_out(1,string)
- pass "$test ($val)"
+ pass "$test"
}
timeout {
fail "$test (timeout)"
return ""
}
+# Return the frame number for the currently selected frame
+proc get_current_frame_number {{test_name ""}} {
+ global gdb_prompt
+
+ if { $test_name == "" } {
+ set test_name "get current frame number"
+ }
+ set frame_num -1
+ gdb_test_multiple "frame" $test_name {
+ -re "#(\[0-9\]+) .*$gdb_prompt $" {
+ set frame_num $expect_out(1,string)
+ }
+ }
+ return $frame_num
+}
+
# Get the current value for remotetimeout and return it.
proc get_remotetimeout { } {
global gdb_prompt
}
}
+# Get the target's current endianness and return it.
+proc get_endianness { } {
+ global gdb_prompt
+
+ gdb_test_multiple "show endian" "determine endianness" {
+ -re ".* (little|big) endian.*\r\n$gdb_prompt $" {
+ # Pass silently.
+ return $expect_out(1,string)
+ }
+ }
+ return "little"
+}
+
# ROOT and FULL are file names. Returns the relative path from ROOT
# to FULL. Note that FULL must be in a subdirectory of ROOT.
# For example, given ROOT = /usr/bin and FULL = /usr/bin/ls, this
# for linker symbol prefixes.
gdb_caching_proc gdb_target_symbol_prefix {
- # Set up and compile a simple test program...
- set src [standard_temp_file main[pid].c]
- set exe [standard_temp_file main[pid].x]
+ # Compile a simple test program...
+ set src { int main() { return 0; } }
+ if {![gdb_simple_compile target_symbol_prefix $src executable]} {
+ return 0
+ }
- gdb_produce_source $src {
- int main() {
- return 0;
- }
+ set prefix ""
+
+ set objdump_program [gdb_find_objdump]
+ set result [catch "exec $objdump_program --syms $obj" output]
+
+ if { $result == 0 \
+ && ![regexp -lineanchor \
+ { ([^ a-zA-Z0-9]*)main$} $output dummy prefix] } {
+ verbose "gdb_target_symbol_prefix: Could not find main in objdump output; returning null prefix" 2
}
- verbose "compiling testfile $src" 2
- set compile_flags {debug nowarnings quiet}
- set lines [gdb_compile $src $exe executable $compile_flags]
+ file delete $obj
- set prefix ""
+ return $prefix
+}
- if ![string match "" $lines] then {
- verbose "gdb_target_symbol_prefix: testfile compilation failed, returning null prefix" 2
- } else {
- set objdump_program [gdb_find_objdump]
- set result [catch "exec $objdump_program --syms $exe" output]
+# Return 1 if target supports scheduler locking, otherwise return 0.
+
+gdb_caching_proc target_supports_scheduler_locking {
+ global gdb_prompt
+
+ set me "gdb_target_supports_scheduler_locking"
- if { $result == 0 \
- && ![regexp -lineanchor \
- { ([^ a-zA-Z0-9]*)main$} $output dummy prefix] } {
- verbose "gdb_target_symbol_prefix: Could not find main in objdump output; returning null prefix" 2
+ set src { int main() { return 0; } }
+ if {![gdb_simple_compile $me $src executable]} {
+ return 0
+ }
+
+ clean_restart $obj
+ if ![runto_main] {
+ return 0
+ }
+
+ set supports_schedule_locking -1
+ set current_schedule_locking_mode ""
+
+ set test "reading current scheduler-locking mode"
+ gdb_test_multiple "show scheduler-locking" $test {
+ -re "Mode for locking scheduler during execution is \"(\[\^\"\]*)\".*$gdb_prompt" {
+ set current_schedule_locking_mode $expect_out(1,string)
+ }
+ -re "$gdb_prompt $" {
+ set supports_schedule_locking 0
+ }
+ timeout {
+ set supports_schedule_locking 0
}
}
- file delete $src
- file delete $exe
+ if { $supports_schedule_locking == -1 } {
+ set test "checking for scheduler-locking support"
+ gdb_test_multiple "set scheduler-locking $current_schedule_locking_mode" $test {
+ -re "Target '\[^'\]+' cannot support this command\..*$gdb_prompt $" {
+ set supports_schedule_locking 0
+ }
+ -re "$gdb_prompt $" {
+ set supports_schedule_locking 1
+ }
+ timeout {
+ set supports_schedule_locking 0
+ }
+ }
+ }
- return $prefix
+ if { $supports_schedule_locking == -1 } {
+ set supports_schedule_locking 0
+ }
+
+ gdb_exit
+ remote_file build delete $obj
+ verbose "$me: returning $supports_schedule_locking" 2
+ return $supports_schedule_locking
}
# gdb_target_symbol returns the provided symbol with the correct prefix
}
}
+# Override the 'cd' builtin with a version that ensures that the
+# log file keeps pointing at the same file. We need this because
+# unfortunately the path to the log file is recorded using an
+# relative path name, and, we sometimes need to close/reopen the log
+# after changing the current directory. See get_compiler_info.
+
+rename cd builtin_cd
+
+proc cd { dir } {
+
+ # Get the existing log file flags.
+ set log_file_info [log_file -info]
+
+ # Split the flags into args and file name.
+ set log_file_flags ""
+ set log_file_file ""
+ foreach arg [ split "$log_file_info" " "] {
+ if [string match "-*" $arg] {
+ lappend log_file_flags $arg
+ } else {
+ lappend log_file_file $arg
+ }
+ }
+
+ # If there was an existing file, ensure it is an absolute path, and then
+ # reset logging.
+ if { $log_file_file != "" } {
+ set log_file_file [file normalize $log_file_file]
+ log_file
+ log_file $log_file_flags "$log_file_file"
+ }
+
+ # Call the builtin version of cd.
+ builtin_cd $dir
+}
+
# Always load compatibility stuff.
load_lib future.exp
projects / deliverable / binutils-gdb.git / blobdiff