-# Copyright 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
-# Free Software Foundation, Inc.
+# Copyright 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
-#
+#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
-#
+#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-# Please email any bugs, comments, and/or additions to this file to:
-# bug-gdb@prep.ai.mit.edu
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
# This file was written by Fred Fish. (fnf@cygnus.com)
# need to be modified for any target, it can be done with a variable
# or by passing arguments.
+if {$tool == ""} {
+ # Tests would fail, logs on get_compiler_info() would be missing.
+ send_error "`site.exp' not found, run `make site.exp'!\n"
+ exit 2
+}
+
load_lib libgloss.exp
global GDB
}
verbose "using GDB = $GDB" 2
+# GDBFLAGS is available for the user to set on the command line.
+# E.g. make check RUNTESTFLAGS=GDBFLAGS=mumble
+# Testcases may use it to add additional flags, but they must:
+# - append new flags, not overwrite
+# - restore the original value when done
global GDBFLAGS
if ![info exists GDBFLAGS] {
- set GDBFLAGS "-nx"
+ set GDBFLAGS ""
}
verbose "using GDBFLAGS = $GDBFLAGS" 2
+# INTERNAL_GDBFLAGS contains flags that the testsuite requires.
+global INTERNAL_GDBFLAGS
+if ![info exists INTERNAL_GDBFLAGS] {
+ set INTERNAL_GDBFLAGS "-nw -nx"
+}
+
# The variable gdb_prompt is a regexp which matches the gdb prompt.
# Set it if it is not already set.
global gdb_prompt
set gdb_prompt "\[(\]gdb\[)\]"
}
+# The variable fullname_syntax_POSIX is a regexp which matches a POSIX
+# absolute path ie. /foo/
+set fullname_syntax_POSIX {/[^\n]*/}
+# The variable fullname_syntax_UNC is a regexp which matches a Windows
+# UNC path ie. \\D\foo\
+set fullname_syntax_UNC {\\\\[^\\]+\\[^\n]+\\}
+# The variable fullname_syntax_DOS_CASE is a regexp which matches a
+# particular DOS case that GDB most likely will output
+# ie. \foo\, but don't match \\.*\
+set fullname_syntax_DOS_CASE {\\[^\\][^\n]*\\}
+# The variable fullname_syntax_DOS is a regexp which matches a DOS path
+# ie. a:\foo\ && a:foo\
+set fullname_syntax_DOS {[a-zA-Z]:[^\n]*\\}
+# The variable fullname_syntax is a regexp which matches what GDB considers
+# an absolute path. It is currently debatable if the Windows style paths
+# d:foo and \abc should be considered valid as an absolute path.
+# Also, the purpse of this regexp is not to recognize a well formed
+# absolute path, but to say with certainty that a path is absolute.
+set fullname_syntax "($fullname_syntax_POSIX|$fullname_syntax_UNC|$fullname_syntax_DOS_CASE|$fullname_syntax_DOS)"
+
# Needed for some tests under Cygwin.
global EXEEXT
global env
set EXEEXT $env(EXEEXT)
}
+set octal "\[0-7\]+"
+
### Only procedures should come after this point.
#
#
proc default_gdb_version {} {
global GDB
- global GDBFLAGS
+ global INTERNAL_GDBFLAGS GDBFLAGS
global gdb_prompt
- set fileid [open "gdb_cmd" w];
- puts $fileid "q";
- close $fileid;
- set cmdfile [remote_download host "gdb_cmd"];
- set output [remote_exec host "$GDB -nw --command $cmdfile"]
- remote_file build delete "gdb_cmd";
- remote_file host delete "$cmdfile";
+ set output [remote_exec host "$GDB $INTERNAL_GDBFLAGS --version"]
set tmp [lindex $output 1];
set version ""
regexp " \[0-9\]\[^ \t\n\r\]+" "$tmp" version
if ![is_remote host] {
- clone_output "[which $GDB] version $version $GDBFLAGS\n"
+ clone_output "[which $GDB] version $version $INTERNAL_GDBFLAGS $GDBFLAGS\n"
} else {
- clone_output "$GDB on remote host version $version $GDBFLAGS\n"
+ clone_output "$GDB on remote host version $version $INTERNAL_GDBFLAGS $GDBFLAGS\n"
}
}
if [target_info exists use_gdb_stub] {
if [target_info exists gdb,do_reload_on_run] {
- # Specifying no file, defaults to the executable
- # currently being debugged.
- if { [gdb_load ""] < 0 } {
+ if { [gdb_reload] != 0 } {
return;
}
send_gdb "continue\n";
send_gdb "y\n"
}
-re "The program is not being run.*$gdb_prompt $" {
- if { [gdb_load ""] < 0 } {
+ if { [gdb_reload] != 0 } {
return;
}
send_gdb "jump *$start\n";
}
return
}
+
+ if [target_info exists gdb,do_reload_on_run] {
+ if { [gdb_reload] != 0 } {
+ return;
+ }
+ }
send_gdb "run $args\n"
# This doesn't work quite right yet.
+# Use -notransfer here so that test cases (like chng-sym.exp)
+# may test for additional start-up messages.
+ gdb_expect 60 {
+ -re "The program .* has been started already.*y or n. $" {
+ send_gdb "y\n"
+ exp_continue
+ }
+ -notransfer -re "Starting program: \[^\r\n\]*" {}
+ }
+}
+
+# Generic start command. Return 0 if we could start the program, -1
+# if we could not.
+
+proc gdb_start_cmd {args} {
+ global gdb_prompt
+
+ if [target_info exists gdb_init_command] {
+ send_gdb "[target_info gdb_init_command]\n";
+ gdb_expect 30 {
+ -re "$gdb_prompt $" { }
+ default {
+ perror "gdb_init_command for target failed";
+ return;
+ }
+ }
+ }
+
+ if [target_info exists use_gdb_stub] {
+ return -1
+ }
+
+ send_gdb "start $args\n"
+ # Use -notransfer here so that test cases (like chng-sym.exp)
+ # may test for additional start-up messages.
gdb_expect 60 {
-re "The program .* has been started already.*y or n. $" {
send_gdb "y\n"
exp_continue
}
- -re "Starting program: \[^\r\n\]*" {}
+ -notransfer -re "Starting program: \[^\r\n\]*" {
+ return 0
+ }
}
+ return -1
}
-proc gdb_breakpoint { function } {
+# Set a breakpoint at FUNCTION. If there is an additional argument it is
+# a list of options; the supported options are allow-pending, temporary,
+# and no-message.
+
+proc gdb_breakpoint { function args } {
global gdb_prompt
global decimal
- send_gdb "break $function\n"
+ set pending_response n
+ if {[lsearch -exact [lindex $args 0] allow-pending] != -1} {
+ set pending_response y
+ }
+
+ set break_command "break"
+ set break_message "Breakpoint"
+ if {[lsearch -exact [lindex $args 0] temporary] != -1} {
+ set break_command "tbreak"
+ set break_message "Temporary breakpoint"
+ }
+
+ set no_message 0
+ if {[lsearch -exact [lindex $args 0] no-message] != -1} {
+ set no_message 1
+ }
+
+ send_gdb "$break_command $function\n"
# The first two regexps are what we get with -g, the third is without -g.
gdb_expect 30 {
- -re "Breakpoint \[0-9\]* at .*: file .*, line $decimal.\r\n$gdb_prompt $" {}
- -re "Breakpoint \[0-9\]*: file .*, line $decimal.\r\n$gdb_prompt $" {}
- -re "Breakpoint \[0-9\]* at .*$gdb_prompt $" {}
- -re "$gdb_prompt $" { fail "setting breakpoint at $function" ; return 0 }
- timeout { fail "setting breakpoint at $function (timeout)" ; return 0 }
+ -re "$break_message \[0-9\]* at .*: file .*, line $decimal.\r\n$gdb_prompt $" {}
+ -re "$break_message \[0-9\]*: file .*, line $decimal.\r\n$gdb_prompt $" {}
+ -re "$break_message \[0-9\]* at .*$gdb_prompt $" {}
+ -re "$break_message \[0-9\]* \\(.*\\) pending.*$gdb_prompt $" {
+ if {$pending_response == "n"} {
+ if { $no_message == 0 } {
+ fail "setting breakpoint at $function"
+ }
+ return 0
+ }
+ }
+ -re "Make breakpoint pending.*y or \\\[n\\\]. $" {
+ send_gdb "$pending_response\n"
+ exp_continue
+ }
+ -re "$gdb_prompt $" {
+ if { $no_message == 0 } {
+ fail "setting breakpoint at $function"
+ }
+ return 0
+ }
+ timeout {
+ if { $no_message == 0 } {
+ fail "setting breakpoint at $function (timeout)"
+ }
+ return 0
+ }
}
return 1;
}
# Since this is the only breakpoint that will be set, if it stops
# at a breakpoint, we will assume it is the one we want. We can't
# just compare to "function" because it might be a fully qualified,
-# single quoted C++ function specifier.
+# single quoted C++ function specifier. If there's an additional argument,
+# pass it to gdb_breakpoint.
-proc runto { function } {
+proc runto { function args } {
global gdb_prompt
global decimal
delete_breakpoints
- if ![gdb_breakpoint $function] {
+ if ![gdb_breakpoint $function [lindex $args 0]] {
return 0;
}
fail "running to $function in runto"
return 0
}
+ eof {
+ fail "running to $function in runto (end of file)"
+ return 0
+ }
timeout {
fail "running to $function in runto (timeout)"
return 0
### worked. Use NAME as part of the test name; each call to
### continue_to_breakpoint should use a NAME which is unique within
### that test file.
-proc gdb_continue_to_breakpoint {name} {
+proc gdb_continue_to_breakpoint {name {location_pattern .*}} {
global gdb_prompt
set full_name "continue to breakpoint: $name"
send_gdb "continue\n"
gdb_expect {
- -re "Breakpoint .* at .*\r\n$gdb_prompt $" {
+ -re "Breakpoint .* (at|in) $location_pattern\r\n$gdb_prompt $" {
pass $full_name
}
-re ".*$gdb_prompt $" {
}
+# gdb_internal_error_resync:
+#
+# Answer the questions GDB asks after it reports an internal error
+# until we get back to a GDB prompt. Decline to quit the debugging
+# session, and decline to create a core file. Return non-zero if the
+# resync succeeds.
+#
+# This procedure just answers whatever questions come up until it sees
+# a GDB prompt; it doesn't require you to have matched the input up to
+# any specific point. However, it only answers questions it sees in
+# the output itself, so if you've matched a question, you had better
+# answer it yourself before calling this.
+#
+# You can use this function thus:
+#
+# gdb_expect {
+# ...
+# -re ".*A problem internal to GDB has been detected" {
+# gdb_internal_error_resync
+# }
+# ...
+# }
+#
+proc gdb_internal_error_resync {} {
+ global gdb_prompt
+
+ set count 0
+ while {$count < 10} {
+ gdb_expect {
+ -re "Quit this debugging session\\? \\(y or n\\) $" {
+ send_gdb "n\n"
+ incr count
+ }
+ -re "Create a core file of GDB\\? \\(y or n\\) $" {
+ send_gdb "n\n"
+ incr count
+ }
+ -re "$gdb_prompt $" {
+ # We're resynchronized.
+ return 1
+ }
+ timeout {
+ perror "Could not resync from internal error (timeout)"
+ return 0
+ }
+ }
+ }
+ perror "Could not resync from internal error (resync count exceeded)"
+ return 0
+}
+
-# gdb_test COMMAND PATTERN MESSAGE QUESTION RESPONSE
+# gdb_test_multiple COMMAND MESSAGE EXPECT_ARGUMENTS
# Send a command to gdb; test the result.
#
# COMMAND is the command to execute, send to GDB with send_gdb. If
# this is the null string no command is sent.
-# PATTERN is the pattern to match for a PASS, and must NOT include
-# the \r\n sequence immediately before the gdb prompt.
-# MESSAGE is an optional message to be printed. If this is
-# omitted, then the pass/fail messages use the command string as the
-# message. (If this is the empty string, then sometimes we don't
-# call pass or fail at all; I don't understand this at all.)
-# QUESTION is a question GDB may ask in response to COMMAND, like
-# "are you sure?"
-# RESPONSE is the response to send if QUESTION appears.
+# MESSAGE is a message to be printed with the built-in failure patterns
+# if one of them matches. If MESSAGE is empty COMMAND will be used.
+# EXPECT_ARGUMENTS will be fed to expect in addition to the standard
+# patterns. Pattern elements will be evaluated in the caller's
+# context; action elements will be executed in the caller's context.
+# Unlike patterns for gdb_test, these patterns should generally include
+# the final newline and prompt.
#
# Returns:
-# 1 if the test failed,
-# 0 if the test passes,
+# 1 if the test failed, according to a built-in failure pattern
+# 0 if only user-supplied patterns matched
# -1 if there was an internal error.
#
-proc gdb_test { args } {
+# You can use this function thus:
+#
+# gdb_test_multiple "print foo" "test foo" {
+# -re "expected output 1" {
+# pass "print foo"
+# }
+# -re "expected output 2" {
+# fail "print foo"
+# }
+# }
+#
+# The standard patterns, such as "Program exited..." and "A problem
+# ...", all being implicitly appended to that list.
+#
+proc gdb_test_multiple { command message user_code } {
global verbose
global gdb_prompt
global GDB
upvar timeout timeout
+ upvar expect_out expect_out
- if [llength $args]>2 then {
- set message [lindex $args 2]
- } else {
- set message [lindex $args 0]
+ if { $message == "" } {
+ set message $command
}
- set command [lindex $args 0]
- set pattern [lindex $args 1]
- if [llength $args]==5 {
- set question_string [lindex $args 3];
- set response_string [lindex $args 4];
- } else {
- set question_string "^FOOBAR$"
- }
+ # TCL/EXPECT WART ALERT
+ # Expect does something very strange when it receives a single braced
+ # argument. It splits it along word separators and performs substitutions.
+ # This means that { "[ab]" } is evaluated as "[ab]", but { "\[ab\]" } is
+ # evaluated as "\[ab\]". But that's not how TCL normally works; inside a
+ # double-quoted list item, "\[ab\]" is just a long way of representing
+ # "[ab]", because the backslashes will be removed by lindex.
+
+ # Unfortunately, there appears to be no easy way to duplicate the splitting
+ # that expect will do from within TCL. And many places make use of the
+ # "\[0-9\]" construct, so we need to support that; and some places make use
+ # of the "[func]" construct, so we need to support that too. In order to
+ # get this right we have to substitute quoted list elements differently
+ # from braced list elements.
+
+ # We do this roughly the same way that Expect does it. We have to use two
+ # lists, because if we leave unquoted newlines in the argument to uplevel
+ # they'll be treated as command separators, and if we escape newlines
+ # we mangle newlines inside of command blocks. This assumes that the
+ # input doesn't contain a pattern which contains actual embedded newlines
+ # at this point!
+
+ regsub -all {\n} ${user_code} { } subst_code
+ set subst_code [uplevel list $subst_code]
+
+ set processed_code ""
+ set patterns ""
+ set expecting_action 0
+ foreach item $user_code subst_item $subst_code {
+ if { $item == "-n" || $item == "-notransfer" || $item == "-nocase" } {
+ lappend processed_code $item
+ continue
+ }
+ if {$item == "-indices" || $item == "-re" || $item == "-ex"} {
+ lappend processed_code $item
+ continue
+ }
+ if { $expecting_action } {
+ lappend processed_code "uplevel [list $item]"
+ set expecting_action 0
+ # Cosmetic, no effect on the list.
+ append processed_code "\n"
+ continue
+ }
+ set expecting_action 1
+ lappend processed_code $subst_item
+ if {$patterns != ""} {
+ append patterns "; "
+ }
+ append patterns "\"$subst_item\""
+ }
+
+ # Also purely cosmetic.
+ regsub -all {\r} $patterns {\\r} patterns
+ regsub -all {\n} $patterns {\\n} patterns
if $verbose>2 then {
send_user "Sending \"$command\" to gdb\n"
- send_user "Looking to match \"$pattern\"\n"
+ send_user "Looking to match \"$patterns\"\n"
send_user "Message is \"$message\"\n"
}
}
}
}
- gdb_expect $tmt {
+
+ set code {
+ -re ".*A problem internal to GDB has been detected" {
+ fail "$message (GDB internal error)"
+ gdb_internal_error_resync
+ }
-re "\\*\\*\\* DOSEXIT code.*" {
if { $message != "" } {
fail "$message";
}
gdb_suppress_entire_file "GDB died";
- return -1;
+ set result -1;
}
+ }
+ append code $processed_code
+ append code {
-re "Ending remote debugging.*$gdb_prompt $" {
if ![isnative] then {
warning "Can`t communicate to remote target."
gdb_exit
gdb_start
set result -1
- }
- -re "\[\r\n\]*($pattern)\[\r\n\]+$gdb_prompt $" {
- if ![string match "" $message] then {
- pass "$message"
- }
- set result 0
- }
- -re "(${question_string})$" {
- send_gdb "$response_string\n";
- exp_continue;
}
-re "Undefined\[a-z\]* command:.*$gdb_prompt $" {
perror "Undefined command \"$command\"."
}
-re "Program exited with code \[0-9\]+.*$gdb_prompt $" {
if ![string match "" $message] then {
- set errmsg "$message: the program exited"
+ set errmsg "$message (the program exited)"
} else {
- set errmsg "$command: the program exited"
+ set errmsg "$command (the program exited)"
}
fail "$errmsg"
- return -1
+ set result -1
}
-re "EXIT code \[0-9\r\n\]+Program exited normally.*$gdb_prompt $" {
if ![string match "" $message] then {
- set errmsg "$message: the program exited"
+ set errmsg "$message (the program exited)"
} else {
- set errmsg "$command: the program exited"
+ set errmsg "$command (the program exited)"
}
fail "$errmsg"
- return -1
+ set result -1
}
-re "The program is not being run.*$gdb_prompt $" {
if ![string match "" $message] then {
- set errmsg "$message: the program is no longer running"
+ set errmsg "$message (the program is no longer running)"
} else {
- set errmsg "$command: the program is no longer running"
+ set errmsg "$command (the program is no longer running)"
}
fail "$errmsg"
- return -1
+ set result -1
}
- -re ".*$gdb_prompt $" {
+ -re "\r\n$gdb_prompt $" {
if ![string match "" $message] then {
fail "$message"
}
send_gdb "\n"
perror "Window too small."
fail "$message"
+ set result -1
}
- -re "\\(y or n\\) " {
+ -re "\\((y or n|y or \\\[n\\\]|\\\[y\\\] or n)\\) " {
send_gdb "n\n"
- perror "Got interactive prompt."
- fail "$message"
+ gdb_expect -re "$gdb_prompt $"
+ fail "$message (got interactive prompt)"
+ set result -1
+ }
+ -re "\\\[0\\\] cancel\r\n\\\[1\\\] all.*\r\n> $" {
+ send_gdb "0\n"
+ gdb_expect -re "$gdb_prompt $"
+ fail "$message (got breakpoint menu)"
+ set result -1
}
eof {
perror "Process no longer exists"
full_buffer {
perror "internal buffer is full."
fail "$message"
+ set result -1
}
timeout {
if ![string match "" $message] then {
set result 1
}
}
+
+ set result 0
+ set code [catch {gdb_expect $tmt $code} string]
+ if {$code == 1} {
+ global errorInfo errorCode;
+ return -code error -errorinfo $errorInfo -errorcode $errorCode $string
+ } elseif {$code == 2} {
+ return -code return $string
+ } elseif {$code == 3} {
+ return
+ } elseif {$code > 4} {
+ return -code $code $string
+ }
return $result
}
+
+# gdb_test COMMAND PATTERN MESSAGE QUESTION RESPONSE
+# Send a command to gdb; test the result.
+#
+# COMMAND is the command to execute, send to GDB with send_gdb. If
+# this is the null string no command is sent.
+# PATTERN is the pattern to match for a PASS, and must NOT include
+# the \r\n sequence immediately before the gdb prompt.
+# MESSAGE is an optional message to be printed. If this is
+# omitted, then the pass/fail messages use the command string as the
+# message. (If this is the empty string, then sometimes we don't
+# call pass or fail at all; I don't understand this at all.)
+# QUESTION is a question GDB may ask in response to COMMAND, like
+# "are you sure?"
+# RESPONSE is the response to send if QUESTION appears.
+#
+# Returns:
+# 1 if the test failed,
+# 0 if the test passes,
+# -1 if there was an internal error.
+#
+proc gdb_test { args } {
+ global verbose
+ global gdb_prompt
+ global GDB
+ upvar timeout timeout
+
+ if [llength $args]>2 then {
+ set message [lindex $args 2]
+ } else {
+ set message [lindex $args 0]
+ }
+ set command [lindex $args 0]
+ set pattern [lindex $args 1]
+
+ if [llength $args]==5 {
+ set question_string [lindex $args 3];
+ set response_string [lindex $args 4];
+ } else {
+ set question_string "^FOOBAR$"
+ }
+
+ return [gdb_test_multiple $command $message {
+ -re "\[\r\n\]*($pattern)\[\r\n\]+$gdb_prompt $" {
+ if ![string match "" $message] then {
+ pass "$message"
+ }
+ }
+ -re "(${question_string})$" {
+ send_gdb "$response_string\n";
+ exp_continue;
+ }
+ }]
+}
\f
# Test that a command gives an error. For pass or fail, return
# a 1 to indicate that more tests can proceed. However a timeout
proc string_to_regexp {str} {
set result $str
- regsub -all {[]*+.|()^$\[]} $str {\\&} result
+ regsub -all {[]*+.|()^$\[\\]} $str {\\&} result
return $result
}
#
proc default_gdb_exit {} {
global GDB
- global GDBFLAGS
+ global INTERNAL_GDBFLAGS GDBFLAGS
global verbose
global gdb_spawn_id;
return;
}
- verbose "Quitting $GDB $GDBFLAGS"
+ verbose "Quitting $GDB $INTERNAL_GDBFLAGS $GDBFLAGS"
if { [is_remote host] && [board_info host exists fileid] } {
send_gdb "quit\n";
unset gdb_spawn_id
}
+# Load a file into the debugger.
+# The return value is 0 for success, -1 for failure.
+#
+# This procedure also set the global variable GDB_FILE_CMD_DEBUG_INFO
+# to one of these values:
+#
+# debug file was loaded successfully and has debug information
+# nodebug file was loaded successfully and has no debug information
+# fail file was not loaded
#
-# load a file into the debugger.
-# return a -1 if anything goes wrong.
+# I tried returning this information as part of the return value,
+# but ran into a mess because of the many re-implementations of
+# gdb_load in config/*.exp.
#
+# TODO: gdb.base/sepdebug.exp and gdb.stabs/weird.exp might be able to use
+# this if they can get more information set.
+
proc gdb_file_cmd { arg } {
+ global gdb_prompt
global verbose
- global loadpath
- global loadfile
global GDB
- global gdb_prompt
- upvar timeout timeout
+ global last_loaded_file
+
+ set last_loaded_file $arg
+
+ # Set whether debug info was found.
+ # Default to "fail".
+ global gdb_file_cmd_debug_info
+ set gdb_file_cmd_debug_info "fail"
if [is_remote host] {
- set arg [remote_download host $arg];
+ set arg [remote_download host $arg]
if { $arg == "" } {
- error "download failed"
- return -1;
+ perror "download failed"
+ return -1
+ }
+ }
+
+ # The file command used to kill the remote target. For the benefit
+ # of the testsuite, preserve this behavior.
+ send_gdb "kill\n"
+ gdb_expect 120 {
+ -re "Kill the program being debugged. .y or n. $" {
+ send_gdb "y\n"
+ verbose "\t\tKilling previous program being debugged"
+ exp_continue
+ }
+ -re "$gdb_prompt $" {
+ # OK.
}
}
send_gdb "file $arg\n"
gdb_expect 120 {
+ -re "Reading symbols from.*no debugging symbols found.*done.*$gdb_prompt $" {
+ verbose "\t\tLoaded $arg into the $GDB with no debugging symbols"
+ set gdb_file_cmd_debug_info "nodebug"
+ return 0
+ }
-re "Reading symbols from.*done.*$gdb_prompt $" {
verbose "\t\tLoaded $arg into the $GDB"
- return 0
- }
- -re "has no symbol-table.*$gdb_prompt $" {
- perror "$arg wasn't compiled with \"-g\""
- return -1
- }
- -re "A program is being debugged already.*Kill it.*y or n. $" {
- send_gdb "y\n"
- verbose "\t\tKilling previous program being debugged"
- exp_continue
+ set gdb_file_cmd_debug_info "debug"
+ return 0
}
-re "Load new symbol table from \".*\".*y or n. $" {
send_gdb "y\n"
gdb_expect 120 {
-re "Reading symbols from.*done.*$gdb_prompt $" {
verbose "\t\tLoaded $arg with new symbol table into $GDB"
- return 0
+ set gdb_file_cmd_debug_info "debug"
+ return 0
}
timeout {
perror "(timeout) Couldn't load $arg, other program already loaded."
- return -1
+ return -1
}
}
}
-re "No such file or directory.*$gdb_prompt $" {
- perror "($arg) No such file or directory\n"
- return -1
+ perror "($arg) No such file or directory"
+ return -1
}
-re "$gdb_prompt $" {
perror "couldn't load $arg into $GDB."
- return -1
+ return -1
}
timeout {
perror "couldn't load $arg into $GDB (timed out)."
- return -1
+ return -1
}
eof {
# This is an attempt to detect a core dump, but seems not to
# work. Perhaps we need to match .* followed by eof, in which
# gdb_expect does not seem to have a way to do that.
perror "couldn't load $arg into $GDB (end of file)."
- return -1
+ return -1
}
}
}
proc default_gdb_start { } {
global verbose
global GDB
- global GDBFLAGS
+ global INTERNAL_GDBFLAGS GDBFLAGS
global gdb_prompt
global timeout
global gdb_spawn_id;
+ global env
gdb_stop_suppressing_tests;
- verbose "Spawning $GDB -nw $GDBFLAGS"
+ set env(LC_CTYPE) C
+
+ # Don't let a .inputrc file or an existing setting of INPUTRC mess up
+ # the test results. Even if /dev/null doesn't exist on the particular
+ # platform, the readline library will use the default setting just by
+ # failing to open the file. OTOH, opening /dev/null successfully will
+ # also result in the default settings being used since nothing will be
+ # read from this file.
+ set env(INPUTRC) "/dev/null"
+
+ # The gdb.base/readline.exp arrow key test relies on the standard VT100
+ # bindings, so make sure that an appropriate terminal is selected.
+ # The same bug doesn't show up if we use ^P / ^N instead.
+ set env(TERM) "vt100"
+
+ verbose "Spawning $GDB $INTERNAL_GDBFLAGS $GDBFLAGS"
if [info exists gdb_spawn_id] {
return 0;
exit 1
}
}
- set res [remote_spawn host "$GDB -nw $GDBFLAGS [host_info gdb_opts]"];
+ set res [remote_spawn host "$GDB $INTERNAL_GDBFLAGS $GDBFLAGS [host_info gdb_opts]"];
if { $res < 0 || $res == "" } {
perror "Spawning $GDB failed."
return 1;
return 0;
}
+# Examine the output of compilation to determine whether compilation
+# failed or not. If it failed determine whether it is due to missing
+# compiler or due to compiler error. Report pass, fail or unsupported
+# as appropriate
+
+proc gdb_compile_test {src output} {
+ if { $output == "" } {
+ pass "compilation [file tail $src]"
+ } elseif { [regexp {^[a-zA-Z_0-9]+: Can't find [^ ]+\.$} $output] } {
+ unsupported "compilation [file tail $src]"
+ } elseif { [regexp {.*: command not found[\r|\n]*$} $output] } {
+ unsupported "compilation [file tail $src]"
+ } else {
+ verbose -log "compilation failed: $output" 2
+ fail "compilation [file tail $src]"
+ }
+}
+
# Return a 1 for configurations for which we don't even want to try to
# test C++.
proc skip_cplus_tests {} {
- if { [istarget "d10v-*-*"] } {
+ if { [istarget "h8300-*-*"] } {
return 1
}
- if { [istarget "h8300-*-*"] } {
+
+ # The C++ IO streams are too large for HC11/HC12 and are thus not
+ # available. The gdb C++ tests use them and don't compile.
+ if { [istarget "m6811-*-*"] } {
+ return 1
+ }
+ if { [istarget "m6812-*-*"] } {
return 1
}
return 0
}
-# Skip all the tests in the file if you are not on an hppa running
-# hpux target.
+# Return a 1 if I don't even want to try to test FORTRAN.
-proc skip_hp_tests {} {
- eval set skip_hp [ expr ![isnative] || ![istarget "hppa*-*-hpux*"] ]
- verbose "Skip hp tests is $skip_hp"
- return $skip_hp
+proc skip_fortran_tests {} {
+ return 0
}
-proc get_compiler_info {binfile args} {
- # Create and source the file that provides information about the compiler
- # used to compile the test case.
- # Compiler_type can be null or c++. If null we assume c.
- global srcdir
- global subdir
- # These two come from compiler.c.
- global signed_keyword_not_used
- global gcc_compiled
-
- if {![istarget "hppa*-*-hpux*"] && ![istarget "mips*-*-irix*"]} {
- if { [llength $args] > 0 } {
- if {$args == "c++"} {
- if { [gdb_compile "${srcdir}/lib/compiler.cc" "${binfile}.ci" preprocess {}] != "" } {
- perror "Couldn't make ${binfile}.ci file"
- return 1;
- }
- }
- } else {
- if { [gdb_compile "${srcdir}/lib/compiler.c" "${binfile}.ci" preprocess {}] != "" } {
- perror "Couldn't make ${binfile}.ci file"
- return 1;
- }
- }
- } else {
- if { [llength $args] > 0 } {
- if {$args == "c++"} {
- if { [eval gdb_preprocess \
- [list "${srcdir}/lib/compiler.cc" "${binfile}.ci"] \
- $args] != "" } {
- perror "Couldn't make ${binfile}.ci file"
- return 1;
- }
- }
- } elseif { $args != "f77" } {
- if { [eval gdb_preprocess \
- [list "${srcdir}/lib/compiler.c" "${binfile}.ci"] \
- $args] != "" } {
- perror "Couldn't make ${binfile}.ci file"
- return 1;
- }
- }
- }
-
- uplevel \#0 { set gcc_compiled 0 }
+# Return a 1 if I don't even want to try to test ada.
- if { [llength $args] == 0 || $args != "f77" } {
- source ${binfile}.ci
- }
+proc skip_ada_tests {} {
+ return 0
+}
- # Most compilers will evaluate comparisons and other boolean
- # operations to 0 or 1.
- uplevel \#0 { set true 1 }
- uplevel \#0 { set false 0 }
+# Return a 1 if I don't even want to try to test java.
- uplevel \#0 { set hp_cc_compiler 0 }
- uplevel \#0 { set hp_aCC_compiler 0 }
- uplevel \#0 { set hp_f77_compiler 0 }
- uplevel \#0 { set hp_f90_compiler 0 }
- if { !$gcc_compiled && [istarget "hppa*-*-hpux*"] } {
- # Check for the HP compilers
- set compiler [lindex [split [get_compiler $args] " "] 0]
- catch "exec what $compiler" output
- if [regexp ".*HP aC\\+\\+.*" $output] {
- uplevel \#0 { set hp_aCC_compiler 1 }
- # Use of aCC results in boolean results being displayed as
- # "true" or "false"
- uplevel \#0 { set true true }
- uplevel \#0 { set false false }
- } elseif [regexp ".*HP C Compiler.*" $output] {
- uplevel \#0 { set hp_cc_compiler 1 }
- } elseif [regexp ".*HP-UX f77.*" $output] {
- uplevel \#0 { set hp_f77_compiler 1 }
- } elseif [regexp ".*HP-UX f90.*" $output] {
- uplevel \#0 { set hp_f90_compiler 1 }
- }
+proc skip_java_tests {} {
+ return 0
+}
+
+# Return a 1 if we should skip shared library tests.
+
+proc skip_shlib_tests {} {
+ # Run the shared library tests on native systems.
+ if {[isnative]} {
+ return 0
}
- return 0;
+ # An abbreviated list of remote targets where we should be able to
+ # run shared library tests.
+ if {([istarget *-*-linux*]
+ || [istarget *-*-*bsd*]
+ || [istarget *-*-solaris2*]
+ || [istarget arm*-*-symbianelf*]
+ || [istarget *-*-mingw*]
+ || [istarget *-*-cygwin*]
+ || [istarget *-*-pe*])} {
+ return 0
+ }
+
+ return 1
}
-proc get_compiler {args} {
- global CC CC_FOR_TARGET CXX CXX_FOR_TARGET F77_FOR_TARGET
+# Run a test on the target to see if it supports vmx hardware. Return 0 if so,
+# 1 if it does not. Based on 'check_vmx_hw_available' from the GCC testsuite.
+
+proc skip_altivec_tests {} {
+ global skip_vmx_tests_saved
+ global srcdir subdir gdb_prompt
+
+ # Use the cached value, if it exists.
+ set me "skip_altivec_tests"
+ if [info exists skip_vmx_tests_saved] {
+ verbose "$me: returning saved $skip_vmx_tests_saved" 2
+ return $skip_vmx_tests_saved
+ }
+
+ # Some simulators are known to not support VMX instructions.
+ if { [istarget powerpc-*-eabi] || [istarget powerpc*-*-eabispe] } {
+ verbose "$me: target known to not support VMX, returning 1" 2
+ return [set skip_vmx_tests_saved 1]
+ }
- if { [llength $args] == 0
- || ([llength $args] == 1 && [lindex $args 0] == "") } {
- set which_compiler "c"
+ # Make sure we have a compiler that understands altivec.
+ set compile_flags {debug nowarnings}
+ if [get_compiler_info not-used] {
+ warning "Could not get compiler info"
+ return 1
+ }
+ if [test_compiler_info gcc*] {
+ set compile_flags "$compile_flags additional_flags=-maltivec"
+ } elseif [test_compiler_info xlc*] {
+ set compile_flags "$compile_flags additional_flags=-qaltivec"
} else {
- if { $args =="c++" } {
- set which_compiler "c++"
- } elseif { $args =="f77" } {
- set which_compiler "f77"
- } else {
- perror "Unknown compiler type supplied to gdb_preprocess"
- return ""
+ verbose "Could not compile with altivec support, returning 1" 2
+ return 1
+ }
+
+ # Set up, compile, and execute a test program containing VMX instructions.
+ # Include the current process ID in the file names to prevent conflicts
+ # with invocations for multiple testsuites.
+ set src vmx[pid].c
+ set exe vmx[pid].x
+
+ set f [open $src "w"]
+ puts $f "int main() {"
+ puts $f "#ifdef __MACH__"
+ puts $f " asm volatile (\"vor v0,v0,v0\");"
+ puts $f "#else"
+ puts $f " asm volatile (\"vor 0,0,0\");"
+ puts $f "#endif"
+ puts $f " return 0; }"
+ close $f
+
+ verbose "$me: compiling testfile $src" 2
+ set lines [gdb_compile $src $exe executable $compile_flags]
+ file delete $src
+
+ if ![string match "" $lines] then {
+ verbose "$me: testfile compilation failed, returning 1" 2
+ return [set skip_vmx_tests_saved 1]
+ }
+
+ # No error message, compilation succeeded so now run it via gdb.
+
+ gdb_exit
+ gdb_start
+ gdb_reinitialize_dir $srcdir/$subdir
+ gdb_load "$exe"
+ gdb_run_cmd
+ gdb_expect {
+ -re ".*Illegal instruction.*${gdb_prompt} $" {
+ verbose -log "\n$me altivec hardware not detected"
+ set skip_vmx_tests_saved 1
+ }
+ -re ".*Program exited normally.*${gdb_prompt} $" {
+ verbose -log "\n$me: altivec hardware detected"
+ set skip_vmx_tests_saved 0
+ }
+ default {
+ warning "\n$me: default case taken"
+ set skip_vmx_tests_saved 1
}
}
+ gdb_exit
+ remote_file build delete $exe
- if [info exists CC_FOR_TARGET] {
- if {$which_compiler == "c"} {
- set compiler $CC_FOR_TARGET
- }
+ verbose "$me: returning $skip_vmx_tests_saved" 2
+ return $skip_vmx_tests_saved
+}
+
+# Run a test on the target to see if it supports vmx hardware. Return 0 if so,
+# 1 if it does not. Based on 'check_vmx_hw_available' from the GCC testsuite.
+
+proc skip_vsx_tests {} {
+ global skip_vsx_tests_saved
+ global srcdir subdir gdb_prompt
+
+ # Use the cached value, if it exists.
+ set me "skip_vsx_tests"
+ if [info exists skip_vsx_tests_saved] {
+ verbose "$me: returning saved $skip_vsx_tests_saved" 2
+ return $skip_vsx_tests_saved
}
-
- if [info exists CXX_FOR_TARGET] {
- if {$which_compiler == "c++"} {
- set compiler $CXX_FOR_TARGET
- }
+
+ # Some simulators are known to not support Altivec instructions, so
+ # they won't support VSX instructions as well.
+ if { [istarget powerpc-*-eabi] || [istarget powerpc*-*-eabispe] } {
+ verbose "$me: target known to not support VSX, returning 1" 2
+ return [set skip_vsx_tests_saved 1]
}
- if [info exists F77_FOR_TARGET] {
- if {$which_compiler == "f77"} {
- set compiler $F77_FOR_TARGET
- }
+ # Make sure we have a compiler that understands altivec.
+ set compile_flags {debug nowarnings quiet}
+ if [get_compiler_info not-used] {
+ warning "Could not get compiler info"
+ return 1
+ }
+ if [test_compiler_info gcc*] {
+ set compile_flags "$compile_flags additional_flags=-mvsx"
+ } elseif [test_compiler_info xlc*] {
+ set compile_flags "$compile_flags additional_flags=-qvsx"
+ } else {
+ verbose "Could not compile with vsx support, returning 1" 2
+ return 1
}
- if { ![info exists compiler] } {
- if { $which_compiler == "c" } {
- if {[info exists CC]} {
- set compiler $CC
- }
- }
- if { $which_compiler == "c++" } {
- if {[info exists CXX]} {
- set compiler $CXX
- }
- }
- if {![info exists compiler]} {
- set compiler [board_info [target_info name] compiler];
- if { $compiler == "" } {
- perror "get_compiler: No compiler found"
- return ""
- }
- }
+ set src vsx[pid].c
+ set exe vsx[pid].x
+
+ set f [open $src "w"]
+ puts $f "int main() {"
+ puts $f "#ifdef __MACH__"
+ puts $f " asm volatile (\"lxvd2x v0,v0,v0\");"
+ puts $f "#else"
+ puts $f " asm volatile (\"lxvd2x 0,0,0\");"
+ puts $f "#endif"
+ puts $f " return 0; }"
+ close $f
+
+ verbose "$me: compiling testfile $src" 2
+ set lines [gdb_compile $src $exe executable $compile_flags]
+ file delete $src
+
+ if ![string match "" $lines] then {
+ verbose "$me: testfile compilation failed, returning 1" 2
+ return [set skip_vsx_tests_saved 1]
+ }
+
+ # No error message, compilation succeeded so now run it via gdb.
+
+ gdb_exit
+ gdb_start
+ gdb_reinitialize_dir $srcdir/$subdir
+ gdb_load "$exe"
+ gdb_run_cmd
+ gdb_expect {
+ -re ".*Illegal instruction.*${gdb_prompt} $" {
+ verbose -log "\n$me VSX hardware not detected"
+ set skip_vsx_tests_saved 1
+ }
+ -re ".*Program exited normally.*${gdb_prompt} $" {
+ verbose -log "\n$me: VSX hardware detected"
+ set skip_vsx_tests_saved 0
+ }
+ default {
+ warning "\n$me: default case taken"
+ set skip_vsx_tests_saved 1
+ }
}
+ gdb_exit
+ remote_file build delete $exe
+
+ verbose "$me: returning $skip_vsx_tests_saved" 2
+ return $skip_vsx_tests_saved
+}
- return $compiler
+# Skip all the tests in the file if you are not on an hppa running
+# hpux target.
+
+proc skip_hp_tests {} {
+ eval set skip_hp [ expr ![isnative] || ![istarget "hppa*-*-hpux*"] ]
+ verbose "Skip hp tests is $skip_hp"
+ return $skip_hp
}
-proc gdb_preprocess {source dest args} {
- set compiler [get_compiler "$args"]
- if { $compiler == "" } {
+# Return whether we should skip tests for showing inlined functions in
+# backtraces. Requires get_compiler_info and get_debug_format.
+
+proc skip_inline_frame_tests {} {
+ # GDB only recognizes inlining information in DWARF 2 (DWARF 3).
+ if { ! [test_debug_format "DWARF 2"] } {
return 1
}
- set cmdline "$compiler -E $source > $dest"
+ # GCC before 4.1 does not emit DW_AT_call_file / DW_AT_call_line.
+ if { ([test_compiler_info "gcc-2-*"]
+ || [test_compiler_info "gcc-3-*"]
+ || [test_compiler_info "gcc-4-0-*"]) } {
+ return 1
+ }
- verbose "Invoking $compiler -E $source > $dest"
- verbose -log "Executing on local host: $cmdline" 2
- set status [catch "exec ${cmdline}" exec_output]
+ return 0
+}
- set result [prune_warnings $exec_output]
- regsub "\[\r\n\]*$" "$result" "" result;
- regsub "^\[\r\n\]*" "$result" "" result;
- if { $result != "" } {
- clone_output "gdb compile failed, $result"
+# Return whether we should skip tests for showing variables from
+# inlined functions. Requires get_compiler_info and get_debug_format.
+
+proc skip_inline_var_tests {} {
+ # GDB only recognizes inlining information in DWARF 2 (DWARF 3).
+ if { ! [test_debug_format "DWARF 2"] } {
+ return 1
}
- return $result;
+
+ return 0
+}
+
+set compiler_info "unknown"
+set gcc_compiled 0
+set hp_cc_compiler 0
+set hp_aCC_compiler 0
+
+# Figure out what compiler I am using.
+#
+# BINFILE is a "compiler information" output file. This implementation
+# does not use BINFILE.
+#
+# ARGS can be empty or "C++". If empty, "C" is assumed.
+#
+# There are several ways to do this, with various problems.
+#
+# [ gdb_compile -E $ifile -o $binfile.ci ]
+# source $binfile.ci
+#
+# Single Unix Spec v3 says that "-E -o ..." together are not
+# specified. And in fact, the native compiler on hp-ux 11 (among
+# others) does not work with "-E -o ...". Most targets used to do
+# this, and it mostly worked, because it works with gcc.
+#
+# [ catch "exec $compiler -E $ifile > $binfile.ci" exec_output ]
+# source $binfile.ci
+#
+# This avoids the problem with -E and -o together. This almost works
+# if the build machine is the same as the host machine, which is
+# usually true of the targets which are not gcc. But this code does
+# not figure which compiler to call, and it always ends up using the C
+# compiler. Not good for setting hp_aCC_compiler. Targets
+# hppa*-*-hpux* and mips*-*-irix* used to do this.
+#
+# [ gdb_compile -E $ifile > $binfile.ci ]
+# source $binfile.ci
+#
+# dejagnu target_compile says that it supports output redirection,
+# but the code is completely different from the normal path and I
+# don't want to sweep the mines from that path. So I didn't even try
+# this.
+#
+# set cppout [ gdb_compile $ifile "" preprocess $args quiet ]
+# eval $cppout
+#
+# I actually do this for all targets now. gdb_compile runs the right
+# compiler, and TCL captures the output, and I eval the output.
+#
+# Unfortunately, expect logs the output of the command as it goes by,
+# and dejagnu helpfully prints a second copy of it right afterwards.
+# So I turn off expect logging for a moment.
+#
+# [ gdb_compile $ifile $ciexe_file executable $args ]
+# [ remote_exec $ciexe_file ]
+# [ source $ci_file.out ]
+#
+# I could give up on -E and just do this.
+# I didn't get desperate enough to try this.
+#
+# -- chastain 2004-01-06
+
+proc get_compiler_info {binfile args} {
+ # For compiler.c and compiler.cc
+ global srcdir
+
+ # I am going to play with the log to keep noise out.
+ global outdir
+ global tool
+
+ # These come from compiler.c or compiler.cc
+ global compiler_info
+
+ # Legacy global data symbols.
+ global gcc_compiled
+ global hp_cc_compiler
+ global hp_aCC_compiler
+
+ # Choose which file to preprocess.
+ set ifile "${srcdir}/lib/compiler.c"
+ if { [llength $args] > 0 && [lindex $args 0] == "c++" } {
+ set ifile "${srcdir}/lib/compiler.cc"
+ }
+
+ # Run $ifile through the right preprocessor.
+ # Toggle gdb.log to keep the compiler output out of the log.
+ log_file
+ if [is_remote host] {
+ # We have to use -E and -o together, despite the comments
+ # above, because of how DejaGnu handles remote host testing.
+ set ppout "$outdir/compiler.i"
+ gdb_compile "${ifile}" "$ppout" preprocess [list "$args" quiet]
+ set file [open $ppout r]
+ set cppout [read $file]
+ close $file
+ } else {
+ set cppout [ gdb_compile "${ifile}" "" preprocess [list "$args" quiet] ]
+ }
+ log_file -a "$outdir/$tool.log"
+
+ # Eval the output.
+ set unknown 0
+ foreach cppline [ split "$cppout" "\n" ] {
+ if { [ regexp "^#" "$cppline" ] } {
+ # line marker
+ } elseif { [ regexp "^\[\n\r\t \]*$" "$cppline" ] } {
+ # blank line
+ } elseif { [ regexp "^\[\n\r\t \]*set\[\n\r\t \]" "$cppline" ] } {
+ # eval this line
+ verbose "get_compiler_info: $cppline" 2
+ eval "$cppline"
+ } else {
+ # unknown line
+ verbose -log "get_compiler_info: $cppline"
+ set unknown 1
+ }
+ }
+
+ # Reset to unknown compiler if any diagnostics happened.
+ if { $unknown } {
+ set compiler_info "unknown"
+ }
+
+ # Set the legacy symbols.
+ set gcc_compiled 0
+ set hp_cc_compiler 0
+ set hp_aCC_compiler 0
+ if { [regexp "^gcc-1-" "$compiler_info" ] } { set gcc_compiled 1 }
+ if { [regexp "^gcc-2-" "$compiler_info" ] } { set gcc_compiled 2 }
+ if { [regexp "^gcc-3-" "$compiler_info" ] } { set gcc_compiled 3 }
+ if { [regexp "^gcc-4-" "$compiler_info" ] } { set gcc_compiled 4 }
+ if { [regexp "^gcc-5-" "$compiler_info" ] } { set gcc_compiled 5 }
+ if { [regexp "^hpcc-" "$compiler_info" ] } { set hp_cc_compiler 1 }
+ if { [regexp "^hpacc-" "$compiler_info" ] } { set hp_aCC_compiler 1 }
+
+ # Log what happened.
+ verbose -log "get_compiler_info: $compiler_info"
+
+ # Most compilers will evaluate comparisons and other boolean
+ # operations to 0 or 1.
+ uplevel \#0 { set true 1 }
+ uplevel \#0 { set false 0 }
+
+ # Use of aCC results in boolean results being displayed as
+ # "true" or "false"
+ if { $hp_aCC_compiler } {
+ uplevel \#0 { set true true }
+ uplevel \#0 { set false false }
+ }
+
+ return 0;
+}
+
+proc test_compiler_info { {compiler ""} } {
+ global compiler_info
+
+ # if no arg, return the compiler_info string
+
+ if [string match "" $compiler] {
+ if [info exists compiler_info] {
+ return $compiler_info
+ } else {
+ perror "No compiler info found."
+ }
+ }
+
+ return [string match $compiler $compiler_info]
+}
+
+proc current_target_name { } {
+ global target_info
+ if [info exists target_info(target,name)] {
+ set answer $target_info(target,name)
+ } else {
+ set answer ""
+ }
+ return $answer
}
set gdb_wrapper_initialized 0
+set gdb_wrapper_target ""
proc gdb_wrapper_init { args } {
global gdb_wrapper_initialized;
global gdb_wrapper_file;
global gdb_wrapper_flags;
+ global gdb_wrapper_target
if { $gdb_wrapper_initialized == 1 } { return; }
}
}
set gdb_wrapper_initialized 1
+ set gdb_wrapper_target [current_target_name]
}
+# Some targets need to always link a special object in. Save its path here.
+global gdb_saved_set_unbuffered_mode_obj
+set gdb_saved_set_unbuffered_mode_obj ""
+
proc gdb_compile {source dest type options} {
global GDB_TESTCASE_OPTIONS;
global gdb_wrapper_file;
global gdb_wrapper_flags;
global gdb_wrapper_initialized;
+ global srcdir
+ global objdir
+ global gdb_saved_set_unbuffered_mode_obj
+
+ set outdir [file dirname $dest]
+
+ # Add platform-specific options if a shared library was specified using
+ # "shlib=librarypath" in OPTIONS.
+ set new_options ""
+ set shlib_found 0
+ set shlib_load 0
+ foreach opt $options {
+ if [regexp {^shlib=(.*)} $opt dummy_var shlib_name] {
+ if [test_compiler_info "xlc-*"] {
+ # IBM xlc compiler doesn't accept shared library named other
+ # than .so: use "-Wl," to bypass this
+ lappend source "-Wl,$shlib_name"
+ } elseif { ([istarget "*-*-mingw*"]
+ || [istarget *-*-cygwin*]
+ || [istarget *-*-pe*])} {
+ lappend source "${shlib_name}.a"
+ } else {
+ lappend source $shlib_name
+ }
+ if { $shlib_found == 0 } {
+ set shlib_found 1
+ if { ([istarget "*-*-mingw*"]
+ || [istarget *-*-cygwin*]) } {
+ lappend new_options "additional_flags=-Wl,--enable-auto-import"
+ }
+ }
+ } elseif { $opt == "shlib_load" } {
+ set shlib_load 1
+ } else {
+ lappend new_options $opt
+ }
+ }
+
+ # We typically link to shared libraries using an absolute path, and
+ # that's how they are found at runtime. If we are going to
+ # dynamically load one by basename, we must specify rpath. If we
+ # are using a remote host, DejaGNU will link to the shared library
+ # using a relative path, so again we must specify an rpath.
+ if { $shlib_load || ($shlib_found && [is_remote host]) } {
+ if { ([istarget "*-*-mingw*"]
+ || [istarget *-*-cygwin*]
+ || [istarget *-*-pe*]
+ || [istarget arm*-*-symbianelf*]
+ || [istarget hppa*-*-hpux*])} {
+ # Do not need anything.
+ } elseif { [istarget *-*-openbsd*] } {
+ lappend new_options "additional_flags=-Wl,-rpath,${outdir}"
+ } else {
+ if { $shlib_load } {
+ lappend new_options "libs=-ldl"
+ }
+ lappend new_options "additional_flags=-Wl,-rpath,\\\$ORIGIN"
+ }
+ }
+ set options $new_options
if [target_info exists gdb_stub] {
set options2 { "additional_flags=-Dusestubs" }
lappend options "ldflags=${gdb_wrapper_flags}"
}
+ # Replace the "nowarnings" option with the appropriate additional_flags
+ # to disable compiler warnings.
+ set nowarnings [lsearch -exact $options nowarnings]
+ if {$nowarnings != -1} {
+ if [target_info exists gdb,nowarnings_flag] {
+ set flag "additional_flags=[target_info gdb,nowarnings_flag]"
+ } else {
+ set flag "additional_flags=-w"
+ }
+ set options [lreplace $options $nowarnings $nowarnings $flag]
+ }
+
+ if { $type == "executable" } {
+ if { ([istarget "*-*-mingw*"]
+ || [istarget "*-*-*djgpp"]
+ || [istarget "*-*-cygwin*"])} {
+ # Force output to unbuffered mode, by linking in an object file
+ # with a global contructor that calls setvbuf.
+ #
+ # Compile the special object seperatelly for two reasons:
+ # 1) Insulate it from $options.
+ # 2) Avoid compiling it for every gdb_compile invocation,
+ # which is time consuming, especially if we're remote
+ # host testing.
+ #
+ if { $gdb_saved_set_unbuffered_mode_obj == "" } {
+ verbose "compiling gdb_saved_set_unbuffered_obj"
+ set unbuf_src ${srcdir}/lib/set_unbuffered_mode.c
+ set unbuf_obj ${objdir}/set_unbuffered_mode.o
+
+ set result [gdb_compile "${unbuf_src}" "${unbuf_obj}" object {nowarnings}]
+ if { $result != "" } {
+ return $result
+ }
+
+ set gdb_saved_set_unbuffered_mode_obj ${objdir}/set_unbuffered_mode_saved.o
+ # Link a copy of the output object, because the
+ # original may be automatically deleted.
+ remote_exec host "cp -f $unbuf_obj $gdb_saved_set_unbuffered_mode_obj"
+ } else {
+ verbose "gdb_saved_set_unbuffered_obj already compiled"
+ }
+
+ # Rely on the internal knowledge that the global ctors are ran in
+ # reverse link order. In that case, we can use ldflags to
+ # avoid copying the object file to the host multiple
+ # times.
+ # This object can only be added if standard libraries are
+ # used. Thus, we need to disable it if -nostdlib option is used
+ if {[lsearch -regexp $options "-nostdlib"] < 0 } {
+ lappend options "ldflags=$gdb_saved_set_unbuffered_mode_obj"
+ }
+ }
+ }
+
set result [target_compile $source $dest $type $options];
+
+ # Prune uninteresting compiler (and linker) output.
+ regsub "Creating library file: \[^\r\n\]*\[\r\n\]+" $result "" result
+
regsub "\[\r\n\]*$" "$result" "" result;
regsub "^\[\r\n\]*" "$result" "" result;
- if { $result != "" } {
- clone_output "gdb compile failed, $result"
+
+ if {[lsearch $options quiet] < 0} {
+ # We shall update this on a per language basis, to avoid
+ # changing the entire testsuite in one go.
+ if {[lsearch $options f77] >= 0} {
+ gdb_compile_test $source $result
+ } elseif { $result != "" } {
+ clone_output "gdb compile failed, $result"
+ }
}
return $result;
}
foreach lib {-lpthreads -lpthread -lthread} {
# This kind of wipes out whatever libs the caller may have
# set. Or maybe theirs will override ours. How infelicitous.
- set options_with_lib [concat $options [list libs=$lib]]
+ set options_with_lib [concat $options [list libs=$lib quiet]]
set ccout [gdb_compile $source $dest $type $options_with_lib]
switch -regexp -- $ccout {
".*no posix threads support.*" {
}
}
+# Build a shared library from SOURCES. You must use get_compiler_info
+# first.
+
+proc gdb_compile_shlib {sources dest options} {
+ set obj_options $options
+
+ switch -glob [test_compiler_info] {
+ "xlc-*" {
+ lappend obj_options "additional_flags=-qpic"
+ }
+ "gcc-*" {
+ if { !([istarget "powerpc*-*-aix*"]
+ || [istarget "rs6000*-*-aix*"]
+ || [istarget "*-*-cygwin*"]
+ || [istarget "*-*-mingw*"]
+ || [istarget "*-*-pe*"]) } {
+ lappend obj_options "additional_flags=-fpic"
+ }
+ }
+ default {
+ switch -glob [istarget] {
+ "hppa*-hp-hpux*" {
+ lappend obj_options "additional_flags=+z"
+ }
+ "mips-sgi-irix*" {
+ # Disable SGI compiler's implicit -Dsgi
+ lappend obj_options "additional_flags=-Usgi"
+ }
+ default {
+ # don't know what the compiler is...
+ }
+ }
+ }
+ }
+
+ set outdir [file dirname $dest]
+ set objects ""
+ foreach source $sources {
+ set sourcebase [file tail $source]
+ if {[gdb_compile $source "${outdir}/${sourcebase}.o" object $obj_options] != ""} {
+ return -1
+ }
+ lappend objects ${outdir}/${sourcebase}.o
+ }
+
+ if [istarget "hppa*-*-hpux*"] {
+ remote_exec build "ld -b ${objects} -o ${dest}"
+ } else {
+ set link_options $options
+ if [test_compiler_info "xlc-*"] {
+ lappend link_options "additional_flags=-qmkshrobj"
+ } else {
+ lappend link_options "additional_flags=-shared"
+
+ if { ([istarget "*-*-mingw*"]
+ || [istarget *-*-cygwin*]
+ || [istarget *-*-pe*])} {
+ lappend link_options "additional_flags=-Wl,--out-implib,${dest}.a"
+ }
+ }
+ if {[gdb_compile "${objects}" "${dest}" executable $link_options] != ""} {
+ return -1
+ }
+ }
+}
+
+# This is just like gdb_compile_pthreads, above, except that we always add the
+# objc library for compiling Objective-C programs
+proc gdb_compile_objc {source dest type options} {
+ set built_binfile 0
+ set why_msg "unrecognized error"
+ foreach lib {-lobjc -lpthreads -lpthread -lthread solaris} {
+ # This kind of wipes out whatever libs the caller may have
+ # set. Or maybe theirs will override ours. How infelicitous.
+ if { $lib == "solaris" } {
+ set lib "-lpthread -lposix4"
+ }
+ if { $lib != "-lobjc" } {
+ set lib "-lobjc $lib"
+ }
+ set options_with_lib [concat $options [list libs=$lib quiet]]
+ set ccout [gdb_compile $source $dest $type $options_with_lib]
+ switch -regexp -- $ccout {
+ ".*no posix threads support.*" {
+ set why_msg "missing threads include file"
+ break
+ }
+ ".*cannot open -lpthread.*" {
+ set why_msg "missing runtime threads library"
+ }
+ ".*Can't find library for -lpthread.*" {
+ set why_msg "missing runtime threads library"
+ }
+ {^$} {
+ pass "successfully compiled objc with posix threads test case"
+ set built_binfile 1
+ break
+ }
+ }
+ }
+ if {!$built_binfile} {
+ unsupported "Couldn't compile $source: ${why_msg}"
+ return -1
+ }
+}
+
proc send_gdb { string } {
global suppress_flag;
if { $suppress_flag } {
proc gdb_expect { args } {
if { [llength $args] == 2 && [lindex $args 0] != "-re" } {
- set gtimeout [lindex $args 0];
+ set atimeout [lindex $args 0];
set expcode [list [lindex $args 1]];
} else {
- upvar timeout timeout;
-
set expcode $args;
- if [target_info exists gdb,timeout] {
- if [info exists timeout] {
- if { $timeout < [target_info gdb,timeout] } {
- set gtimeout [target_info gdb,timeout];
- } else {
- set gtimeout $timeout;
- }
- } else {
+ }
+
+ upvar timeout timeout;
+
+ if [target_info exists gdb,timeout] {
+ if [info exists timeout] {
+ if { $timeout < [target_info gdb,timeout] } {
set gtimeout [target_info gdb,timeout];
+ } else {
+ set gtimeout $timeout;
}
+ } else {
+ set gtimeout [target_info gdb,timeout];
}
+ }
+ if ![info exists gtimeout] {
+ global timeout;
+ if [info exists timeout] {
+ set gtimeout $timeout;
+ }
+ }
+
+ if [info exists atimeout] {
+ if { ![info exists gtimeout] || $gtimeout < $atimeout } {
+ set gtimeout $atimeout;
+ }
+ } else {
if ![info exists gtimeout] {
- global timeout;
- if [info exists timeout] {
- set gtimeout $timeout;
- } else {
- # Eeeeew.
- set gtimeout 60;
- }
+ # Eeeeew.
+ set gtimeout 60;
}
}
+
global suppress_flag;
global remote_suppress_flag;
if [info exists remote_suppress_flag] {
fail "${test} (pattern ${index} + sentinel)"
set ok 0
}
+ -re ".*A problem internal to GDB has been detected" {
+ fail "${test} (GDB internal error)"
+ set ok 0
+ gdb_internal_error_resync
+ }
timeout {
fail "${test} (pattern ${index} + sentinel) (timeout)"
set ok 0
fail "${test} (pattern ${index})"
set ok 0
}
+ -re ".*A problem internal to GDB has been detected" {
+ fail "${test} (GDB internal error)"
+ set ok 0
+ gdb_internal_error_resync
+ }
timeout {
fail "${test} (pattern ${index}) (timeout)"
set ok 0
catch default_gdb_exit
}
+#
+# gdb_load_cmd -- load a file into the debugger.
+# ARGS - additional args to load command.
+# return a -1 if anything goes wrong.
+#
+proc gdb_load_cmd { args } {
+ global gdb_prompt
+
+ if [target_info exists gdb_load_timeout] {
+ set loadtimeout [target_info gdb_load_timeout]
+ } else {
+ set loadtimeout 1600
+ }
+ send_gdb "load $args\n"
+ verbose "Timeout is now $loadtimeout seconds" 2
+ gdb_expect $loadtimeout {
+ -re "Loading section\[^\r\]*\r\n" {
+ exp_continue
+ }
+ -re "Start address\[\r\]*\r\n" {
+ exp_continue
+ }
+ -re "Transfer rate\[\r\]*\r\n" {
+ exp_continue
+ }
+ -re "Memory access error\[^\r\]*\r\n" {
+ perror "Failed to load program"
+ return -1
+ }
+ -re "$gdb_prompt $" {
+ return 0
+ }
+ -re "(.*)\r\n$gdb_prompt " {
+ perror "Unexpected reponse from 'load' -- $expect_out(1,string)"
+ return -1
+ }
+ timeout {
+ perror "Timed out trying to load $args."
+ return -1
+ }
+ }
+ return -1
+}
+
+# gdb_download
+#
+# Copy a file to the remote target and return its target filename.
+# Schedule the file to be deleted at the end of this test.
+
+proc gdb_download { filename } {
+ global cleanfiles
+
+ set destname [remote_download target $filename]
+ lappend cleanfiles $destname
+ return $destname
+}
+
+# gdb_load_shlibs LIB...
+#
+# Copy the listed libraries to the target.
+
+proc gdb_load_shlibs { args } {
+ if {![is_remote target]} {
+ return
+ }
+
+ foreach file $args {
+ gdb_download $file
+ }
+
+ # Even if the target supplies full paths for shared libraries,
+ # they may not be paths for this system.
+ gdb_test "set solib-search-path [file dirname [lindex $args 0]]" "" ""
+}
+
#
# gdb_load -- load a file into the debugger.
-# return a -1 if anything goes wrong.
+# Many files in config/*.exp override this procedure.
#
proc gdb_load { arg } {
return [gdb_file_cmd $arg]
}
+# gdb_reload -- load a file into the target. Called before "running",
+# either the first time or after already starting the program once,
+# for remote targets. Most files that override gdb_load should now
+# override this instead.
+
+proc gdb_reload { } {
+ # For the benefit of existing configurations, default to gdb_load.
+ # Specifying no file defaults to the executable currently being
+ # debugged.
+ return [gdb_load ""]
+}
+
proc gdb_continue { function } {
global decimal
proc default_gdb_init { args } {
global gdb_wrapper_initialized
+ global gdb_wrapper_target
+ global cleanfiles
+ set cleanfiles {}
+
gdb_clear_suppressed;
# Make sure that the wrapper is rebuilt
# with the appropriate multilib option.
- set gdb_wrapper_initialized 0
+ if { $gdb_wrapper_target != [current_target_name] } {
+ set gdb_wrapper_initialized 0
+ }
- # Uh, this is lame. Really, really, really lame. But there's this *one*
- # testcase that will fail in random places if we don't increase this.
- match_max -d 20000
+ # Unlike most tests, we have a small number of tests that generate
+ # a very large amount of output. We therefore increase the expect
+ # buffer size to be able to contain the entire test output.
+ match_max -d 30000
+ # Also set this value for the currently running GDB.
+ match_max [match_max -d]
# We want to add the name of the TCL testcase to the PASS/FAIL messages.
if { [llength $args] > 0 } {
}
}
+# The default timeout used when testing GDB commands. We want to use
+# the same timeout as the default dejagnu timeout, unless the user has
+# already provided a specific value (probably through a site.exp file).
+global gdb_test_timeout
+if ![info exists gdb_test_timeout] {
+ set gdb_test_timeout $timeout
+}
+
proc gdb_init { args } {
+ # Reset the timeout value to the default. This way, any testcase
+ # that changes the timeout value without resetting it cannot affect
+ # the timeout used in subsequent testcases.
+ global gdb_test_timeout
+ global timeout
+ set timeout $gdb_test_timeout
+
return [eval default_gdb_init $args];
}
proc gdb_finish { } {
- gdb_exit;
+ global cleanfiles
+
+ # Exit first, so that the files are no longer in use.
+ gdb_exit
+
+ if { [llength $cleanfiles] > 0 } {
+ eval remote_file target delete $cleanfiles
+ set cleanfiles {}
+ }
}
global debug_format
}
}
-### gdb_get_line_number TEXT [FILE]
-###
-### Search the source file FILE, and return the line number of a line
-### containing TEXT. Use this function instead of hard-coding line
-### numbers into your test script.
-###
-### Specifically, this function uses GDB's "search" command to search
-### FILE for the first line containing TEXT, and returns its line
-### number. Thus, FILE must be a source file, compiled into the
-### executable you are running. If omitted, FILE defaults to the
-### value of the global variable `srcfile'; most test scripts set
-### `srcfile' appropriately at the top anyway.
-###
-### Use this function to keep your test scripts independent of the
-### exact line numbering of the source file. Don't write:
-###
-### send_gdb "break 20"
-###
-### This means that if anyone ever edits your test's source file,
-### your test could break. Instead, put a comment like this on the
-### source file line you want to break at:
-###
-### /* breakpoint spot: frotz.exp: test name */
-###
-### and then write, in your test script (which we assume is named
-### frotz.exp):
-###
-### send_gdb "break [gdb_get_line_number "frotz.exp: test name"]\n"
-###
-### (Yes, Tcl knows how to handle the nested quotes and brackets.
-### Try this:
-### $ tclsh
-### % puts "foo [lindex "bar baz" 1]"
-### foo baz
-### %
-### Tcl is quite clever, for a little stringy language.)
-
-proc gdb_get_line_number {text {file /omitted/}} {
- global gdb_prompt;
- global srcfile;
+# gdb_get_line_number TEXT [FILE]
+#
+# Search the source file FILE, and return the line number of the
+# first line containing TEXT. If no match is found, return -1.
+#
+# TEXT is a string literal, not a regular expression.
+#
+# The default value of FILE is "$srcdir/$subdir/$srcfile". If FILE is
+# specified, and does not start with "/", then it is assumed to be in
+# "$srcdir/$subdir". This is awkward, and can be fixed in the future,
+# by changing the callers and the interface at the same time.
+# In particular: gdb.base/break.exp, gdb.base/condbreak.exp,
+# gdb.base/ena-dis-br.exp.
+#
+# Use this function to keep your test scripts independent of the
+# exact line numbering of the source file. Don't write:
+#
+# send_gdb "break 20"
+#
+# This means that if anyone ever edits your test's source file,
+# your test could break. Instead, put a comment like this on the
+# source file line you want to break at:
+#
+# /* breakpoint spot: frotz.exp: test name */
+#
+# and then write, in your test script (which we assume is named
+# frotz.exp):
+#
+# send_gdb "break [gdb_get_line_number "frotz.exp: test name"]\n"
+#
+# (Yes, Tcl knows how to handle the nested quotes and brackets.
+# Try this:
+# $ tclsh
+# % puts "foo [lindex "bar baz" 1]"
+# foo baz
+# %
+# Tcl is quite clever, for a little stringy language.)
+#
+# ===
+#
+# The previous implementation of this procedure used the gdb search command.
+# This version is different:
+#
+# . It works with MI, and it also works when gdb is not running.
+#
+# . It operates on the build machine, not the host machine.
+#
+# . For now, this implementation fakes a current directory of
+# $srcdir/$subdir to be compatible with the old implementation.
+# This will go away eventually and some callers will need to
+# be changed.
+#
+# . The TEXT argument is literal text and matches literally,
+# not a regular expression as it was before.
+#
+# . State changes in gdb, such as changing the current file
+# and setting $_, no longer happen.
+#
+# After a bit of time we can forget about the differences from the
+# old implementation.
+#
+# --chastain 2004-08-05
+
+proc gdb_get_line_number { text { file "" } } {
+ global srcdir
+ global subdir
+ global srcfile
- if {! [string compare $file /omitted/]} {
- set file $srcfile
+ if { "$file" == "" } then {
+ set file "$srcfile"
+ }
+ if { ! [regexp "^/" "$file"] } then {
+ set file "$srcdir/$subdir/$file"
}
- set result -1;
- gdb_test "list ${file}:1,1" ".*" ""
- send_gdb "search ${text}\n"
- gdb_expect {
- -re "\[\r\n\]+(\[0-9\]+)\[ \t\].*${text}.*$gdb_prompt $" {
- set result $expect_out(1,string)
- }
- -re ".*$gdb_prompt $" {
- fail "find line number containing \"${text}\""
- }
- timeout {
- fail "find line number containing \"${text}\" (timeout)"
- }
+ if { [ catch { set fd [open "$file"] } message ] } then {
+ perror "$message"
+ return -1
}
- return $result;
+
+ set found -1
+ for { set line 1 } { 1 } { incr line } {
+ if { [ catch { set nchar [gets "$fd" body] } message ] } then {
+ perror "$message"
+ return -1
+ }
+ if { $nchar < 0 } then {
+ break
+ }
+ if { [string first "$text" "$body"] >= 0 } then {
+ set found $line
+ break
+ }
+ }
+
+ if { [ catch { close "$fd" } message ] } then {
+ perror "$message"
+ return -1
+ }
+
+ return $found
}
# gdb_continue_to_end:
return 0;
}
+# Return true if a test should be skipped due to lack of XML support
+# in the host GDB.
+# NOTE: This must be called while gdb is *not* running.
+
+proc gdb_skip_xml_test { } {
+ global gdb_prompt
+ global srcdir
+ global xml_missing_cached
+
+ if {[info exists xml_missing_cached]} {
+ return $xml_missing_cached
+ }
+
+ gdb_start
+ set xml_missing_cached 0
+ gdb_test_multiple "set tdesc filename ${srcdir}/gdb.xml/trivial.xml" "" {
+ -re ".*XML support was disabled at compile time.*$gdb_prompt $" {
+ set xml_missing_cached 1
+ }
+ -re ".*$gdb_prompt $" { }
+ }
+ gdb_exit
+ return $xml_missing_cached
+}
+
+# Note: the procedure gdb_gnu_strip_debug will produce an executable called
+# ${binfile}.dbglnk, which is just like the executable ($binfile) but without
+# the debuginfo. Instead $binfile has a .gnu_debuglink section which contains
+# the name of a debuginfo only file. This file will be stored in the
+# gdb.base/.debug subdirectory.
+
+# Functions for separate debug info testing
+
+# starting with an executable:
+# foo --> original executable
+
+# at the end of the process we have:
+# foo.stripped --> foo w/o debug info
+# .debug/foo.debug --> foo's debug info
+# foo --> like foo, but with a new .gnu_debuglink section pointing to foo.debug.
+
+# Return the name of the file in which we should stor EXEC's separated
+# debug info. EXEC contains the full path.
+proc separate_debug_filename { exec } {
+
+ # In a .debug subdirectory off the same directory where the testcase
+ # executable is going to be. Something like:
+ # <your-path>/gdb/testsuite/gdb.base/.debug/blah.debug.
+ # This is the default location where gdb expects to findi
+ # the debug info file.
+
+ set exec_dir [file dirname $exec]
+ set exec_file [file tail $exec]
+ set debug_dir [file join $exec_dir ".debug"]
+ set debug_file [file join $debug_dir "${exec_file}.debug"]
+
+ return $debug_file
+}
+
+# Return the build-id hex string (usually 160 bits as 40 hex characters)
+# converted to the form: .build-id/ab/cdef1234...89.debug
+# Return "" if no build-id found.
+proc build_id_debug_filename_get { exec } {
+ set tmp "${exec}-tmp"
+ set objcopy_program [transform objcopy]
+
+ set result [catch "exec $objcopy_program -j .note.gnu.build-id -O binary $exec $tmp" output]
+ verbose "result is $result"
+ verbose "output is $output"
+ if {$result == 1} {
+ return ""
+ }
+ set fi [open $tmp]
+ fconfigure $fi -translation binary
+ # Skip the NOTE header.
+ read $fi 16
+ set data [read $fi]
+ close $fi
+ file delete $tmp
+ if ![string compare $data ""] then {
+ return ""
+ }
+ # Convert it to hex.
+ binary scan $data H* data
+ set data [regsub {^..} $data {\0/}]
+ return ".build-id/${data}.debug";
+}
+
+# Create stripped files for DEST, replacing it. If ARGS is passed, it is a
+# list of optional flags. The only currently supported flag is no-main,
+# which removes the symbol entry for main from the separate debug file.
+
+proc gdb_gnu_strip_debug { dest args } {
+
+ set debug_file [separate_debug_filename $dest]
+ set strip_to_file_program [transform strip]
+ set objcopy_program [transform objcopy]
+
+ # Make sure the directory that will hold the separated debug
+ # info actually exists.
+ set debug_dir [file dirname $debug_file]
+ if {! [file isdirectory $debug_dir]} {
+ file mkdir $debug_dir
+ }
+
+ set debug_link [file tail $debug_file]
+ set stripped_file "${dest}.stripped"
+
+ # Get rid of the debug info, and store result in stripped_file
+ # something like gdb/testsuite/gdb.base/blah.stripped.
+ set result [catch "exec $strip_to_file_program --strip-debug ${dest} -o ${stripped_file}" output]
+ verbose "result is $result"
+ verbose "output is $output"
+ if {$result == 1} {
+ return 1
+ }
+
+ # Workaround PR binutils/10802:
+ # Preserve the 'x' bit also for PIEs (Position Independent Executables).
+ set perm [file attributes ${dest} -permissions]
+ file attributes ${stripped_file} -permissions $perm
+
+ # Get rid of everything but the debug info, and store result in debug_file
+ # This will be in the .debug subdirectory, see above.
+ set result [catch "exec $strip_to_file_program --only-keep-debug ${dest} -o ${debug_file}" output]
+ verbose "result is $result"
+ verbose "output is $output"
+ if {$result == 1} {
+ return 1
+ }
+
+ # If no-main is passed, strip the symbol for main from the separate
+ # file. This is to simulate the behavior of elfutils's eu-strip, which
+ # leaves the symtab in the original file only. There's no way to get
+ # objcopy or strip to remove the symbol table without also removing the
+ # debugging sections, so this is as close as we can get.
+ if { [llength $args] == 1 && [lindex $args 0] == "no-main" } {
+ set result [catch "exec $objcopy_program -N main ${debug_file} ${debug_file}-tmp" output]
+ verbose "result is $result"
+ verbose "output is $output"
+ if {$result == 1} {
+ return 1
+ }
+ file delete "${debug_file}"
+ file rename "${debug_file}-tmp" "${debug_file}"
+ }
+
+ # Link the two previous output files together, adding the .gnu_debuglink
+ # section to the stripped_file, containing a pointer to the debug_file,
+ # save the new file in dest.
+ # This will be the regular executable filename, in the usual location.
+ set result [catch "exec $objcopy_program --add-gnu-debuglink=${debug_file} ${stripped_file} ${dest}" output]
+ verbose "result is $result"
+ verbose "output is $output"
+ if {$result == 1} {
+ return 1
+ }
+
+ # Workaround PR binutils/10802:
+ # Preserve the 'x' bit also for PIEs (Position Independent Executables).
+ set perm [file attributes ${stripped_file} -permissions]
+ file attributes ${dest} -permissions $perm
+
+ return 0
+}
+
+# Test the output of GDB_COMMAND matches the pattern obtained
+# by concatenating all elements of EXPECTED_LINES. This makes
+# it possible to split otherwise very long string into pieces.
+# If third argument is not empty, it's used as the name of the
+# test to be printed on pass/fail.
+proc help_test_raw { gdb_command expected_lines args } {
+ set message $gdb_command
+ if [llength $args]>0 then {
+ set message [lindex $args 0]
+ }
+ set expected_output [join $expected_lines ""]
+ gdb_test "${gdb_command}" "${expected_output}" $message
+}
+
+# Test the output of "help COMMNAD_CLASS". EXPECTED_INITIAL_LINES
+# are regular expressions that should match the beginning of output,
+# before the list of commands in that class. The presence of
+# command list and standard epilogue will be tested automatically.
+proc test_class_help { command_class expected_initial_lines args } {
+ set l_stock_body {
+ "List of commands\:.*\[\r\n\]+"
+ "Type \"help\" followed by command name for full documentation\.\[\r\n\]+"
+ "Type \"apropos word\" to search for commands related to \"word\"\.[\r\n\]+"
+ "Command name abbreviations are allowed if unambiguous\."
+ }
+ set l_entire_body [concat $expected_initial_lines $l_stock_body]
+
+ eval [list help_test_raw "help ${command_class}" $l_entire_body] $args
+}
+
+# COMMAND_LIST should have either one element -- command to test, or
+# two elements -- abbreviated command to test, and full command the first
+# element is abbreviation of.
+# The command must be a prefix command. EXPECTED_INITIAL_LINES
+# are regular expressions that should match the beginning of output,
+# before the list of subcommands. The presence of
+# subcommand list and standard epilogue will be tested automatically.
+proc test_prefix_command_help { command_list expected_initial_lines args } {
+ set command [lindex $command_list 0]
+ if {[llength $command_list]>1} {
+ set full_command [lindex $command_list 1]
+ } else {
+ set full_command $command
+ }
+ # Use 'list' and not just {} because we want variables to
+ # be expanded in this list.
+ set l_stock_body [list\
+ "List of $full_command subcommands\:.*\[\r\n\]+"\
+ "Type \"help $full_command\" followed by $full_command subcommand name for full documentation\.\[\r\n\]+"\
+ "Type \"apropos word\" to search for commands related to \"word\"\.\[\r\n\]+"\
+ "Command name abbreviations are allowed if unambiguous\."]
+ set l_entire_body [concat $expected_initial_lines $l_stock_body]
+ if {[llength $args]>0} {
+ help_test_raw "help ${command}" $l_entire_body [lindex $args 0]
+ } else {
+ help_test_raw "help ${command}" $l_entire_body
+ }
+}
+
+# Build executable named EXECUTABLE, from SOURCES. If SOURCES are not
+# provided, uses $EXECUTABLE.c. The TESTNAME paramer is the name of test
+# to pass to untested, if something is wrong. OPTIONS are passed
+# to gdb_compile directly.
+proc build_executable { testname executable {sources ""} {options {debug}} } {
+
+ global objdir
+ global subdir
+ global srcdir
+ if {[llength $sources]==0} {
+ set sources ${executable}.c
+ }
+
+ set binfile ${objdir}/${subdir}/${executable}
+
+ set objects {}
+ for {set i 0} "\$i<[llength $sources]" {incr i} {
+ set s [lindex $sources $i]
+ if { [gdb_compile "${srcdir}/${subdir}/${s}" "${binfile}${i}.o" object $options] != "" } {
+ untested $testname
+ return -1
+ }
+ lappend objects "${binfile}${i}.o"
+ }
+
+ if { [gdb_compile $objects "${binfile}" executable $options] != "" } {
+ untested $testname
+ return -1
+ }
+
+ if [get_compiler_info ${binfile}] {
+ return -1
+ }
+ return 0
+}
+
+# Starts fresh GDB binary and loads EXECUTABLE into GDB. EXECUTABLE is
+# the name of binary in ${objdir}/${subdir}.
+proc clean_restart { executable } {
+ global srcdir
+ global objdir
+ global subdir
+ set binfile ${objdir}/${subdir}/${executable}
+
+ gdb_exit
+ gdb_start
+ gdb_reinitialize_dir $srcdir/$subdir
+ gdb_load ${binfile}
+
+ if [target_info exists gdb_stub] {
+ gdb_step_for_stub;
+ }
+}
+
+# Prepares for testing, by calling build_executable, and then clean_restart.
+# Please refer to build_executable for parameter description.
+proc prepare_for_testing { testname executable {sources ""} {options {debug}}} {
+
+ if {[build_executable $testname $executable $sources $options] == -1} {
+ return -1
+ }
+ clean_restart $executable
+
+ return 0
+}
+
+proc get_valueof { fmt exp default } {
+ global gdb_prompt
+
+ set test "get valueof \"${exp}\""
+ set val ${default}
+ gdb_test_multiple "print${fmt} ${exp}" "$test" {
+ -re "\\$\[0-9\]* = (.*)\[\r\n\]*$gdb_prompt $" {
+ set val $expect_out(1,string)
+ pass "$test ($val)"
+ }
+ timeout {
+ fail "$test (timeout)"
+ }
+ }
+ return ${val}
+}
+
+proc get_integer_valueof { exp default } {
+ global gdb_prompt
+
+ set test "get integer valueof \"${exp}\""
+ set val ${default}
+ gdb_test_multiple "print /d ${exp}" "$test" {
+ -re "\\$\[0-9\]* = (\[-\]*\[0-9\]*).*$gdb_prompt $" {
+ set val $expect_out(1,string)
+ pass "$test ($val)"
+ }
+ timeout {
+ fail "$test (timeout)"
+ }
+ }
+ return ${val}
+}
+
+proc get_hexadecimal_valueof { exp default } {
+ global gdb_prompt
+ send_gdb "print /x ${exp}\n"
+ set test "get hexadecimal valueof \"${exp}\""
+ gdb_expect {
+ -re "\\$\[0-9\]* = (0x\[0-9a-zA-Z\]+).*$gdb_prompt $" {
+ set val $expect_out(1,string)
+ pass "$test"
+ }
+ timeout {
+ set val ${default}
+ fail "$test (timeout)"
+ }
+ }
+ return ${val}
+}
+
+proc get_sizeof { type default } {
+ return [get_integer_valueof "sizeof (${type})" $default]
+}
+
+# Log gdb command line and script if requested.
+if {[info exists TRANSCRIPT]} {
+ rename send_gdb real_send_gdb
+ rename remote_spawn real_remote_spawn
+ rename remote_close real_remote_close
+
+ global gdb_transcript
+ set gdb_transcript ""
+
+ global gdb_trans_count
+ set gdb_trans_count 1
+
+ proc remote_spawn {args} {
+ global gdb_transcript gdb_trans_count outdir
+
+ if {$gdb_transcript != ""} {
+ close $gdb_transcript
+ }
+ set gdb_transcript [open [file join $outdir transcript.$gdb_trans_count] w]
+ puts $gdb_transcript [lindex $args 1]
+ incr gdb_trans_count
+
+ return [uplevel real_remote_spawn $args]
+ }
+
+ proc remote_close {args} {
+ global gdb_transcript
+
+ if {$gdb_transcript != ""} {
+ close $gdb_transcript
+ set gdb_transcript ""
+ }
+
+ return [uplevel real_remote_close $args]
+ }
+
+ proc send_gdb {args} {
+ global gdb_transcript
+
+ if {$gdb_transcript != ""} {
+ puts -nonewline $gdb_transcript [lindex $args 0]
+ }
+
+ return [uplevel real_send_gdb $args]
+ }
+}
+
+proc core_find {binfile {deletefiles {}} {arg ""}} {
+ global objdir subdir
+
+ set destcore "$binfile.core"
+ file delete $destcore
+
+ # Create a core file named "$destcore" rather than just "core", to
+ # avoid problems with sys admin types that like to regularly prune all
+ # files named "core" from the system.
+ #
+ # Arbitrarily try setting the core size limit to "unlimited" since
+ # this does not hurt on systems where the command does not work and
+ # allows us to generate a core on systems where it does.
+ #
+ # Some systems append "core" to the name of the program; others append
+ # the name of the program to "core"; still others (like Linux, as of
+ # May 2003) create cores named "core.PID". In the latter case, we
+ # could have many core files lying around, and it may be difficult to
+ # tell which one is ours, so let's run the program in a subdirectory.
+ set found 0
+ set coredir "${objdir}/${subdir}/coredir.[getpid]"
+ file mkdir $coredir
+ catch "system \"(cd ${coredir}; ulimit -c unlimited; ${binfile} ${arg}; true) >/dev/null 2>&1\""
+ # remote_exec host "${binfile}"
+ foreach i "${coredir}/core ${coredir}/core.coremaker.c ${binfile}.core" {
+ if [remote_file build exists $i] {
+ remote_exec build "mv $i $destcore"
+ set found 1
+ }
+ }
+ # Check for "core.PID".
+ if { $found == 0 } {
+ set names [glob -nocomplain -directory $coredir core.*]
+ if {[llength $names] == 1} {
+ set corefile [file join $coredir [lindex $names 0]]
+ remote_exec build "mv $corefile $destcore"
+ set found 1
+ }
+ }
+ if { $found == 0 } {
+ # The braindamaged HPUX shell quits after the ulimit -c above
+ # without executing ${binfile}. So we try again without the
+ # ulimit here if we didn't find a core file above.
+ # Oh, I should mention that any "braindamaged" non-Unix system has
+ # the same problem. I like the cd bit too, it's really neat'n stuff.
+ catch "system \"(cd ${objdir}/${subdir}; ${binfile}; true) >/dev/null 2>&1\""
+ foreach i "${objdir}/${subdir}/core ${objdir}/${subdir}/core.coremaker.c ${binfile}.core" {
+ if [remote_file build exists $i] {
+ remote_exec build "mv $i $destcore"
+ set found 1
+ }
+ }
+ }
+
+ # Try to clean up after ourselves.
+ foreach deletefile $deletefiles {
+ remote_file build delete [file join $coredir $deletefile]
+ }
+ remote_exec build "rmdir $coredir"
+
+ if { $found == 0 } {
+ warning "can't generate a core file - core tests suppressed - check ulimit -c"
+ return ""
+ }
+ return $destcore
+}