-# Copyright 2000-2014 Free Software Foundation, Inc.
+# Copyright 2000-2020 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
#
#
-# gdb_target_cmd
-# Send gdb the "target" command
+# gdb_target_cmd_ext
+# Send gdb the "target" command. Returns 0 on success, 1 on failure, 2 on
+# unsupported.
+# If specified, then ADDITIONAL_TEXT must match the text that comes after
+# the connection message in order for the procedure to succeed.
#
-proc gdb_target_cmd { targetname serialport } {
+proc gdb_target_cmd_ext { targetname serialport {additional_text ""} } {
global gdb_prompt
set serialport_re [string_to_regexp $serialport]
-re "Couldn't establish connection to remote.*$gdb_prompt $" {
verbose "Connection failed"
}
- -re "Remote MIPS debugging.*$gdb_prompt" {
+ -re "Remote MIPS debugging.*$additional_text.*$gdb_prompt" {
verbose "Set target to $targetname"
return 0
}
- -re "Remote debugging using .*$serialport_re.*$gdb_prompt $" {
+ -re "Remote debugging using .*$serialport_re.*$additional_text.*$gdb_prompt $" {
verbose "Set target to $targetname"
return 0
}
- -re "Remote debugging using stdio.*$gdb_prompt $" {
+ -re "Remote debugging using stdio.*$additional_text.*$gdb_prompt $" {
verbose "Set target to $targetname"
return 0
}
- -re "Remote target $targetname connected to.*$gdb_prompt $" {
+ -re "Remote target $targetname connected to.*$additional_text.*$gdb_prompt $" {
verbose "Set target to $targetname"
return 0
}
- -re "Connected to.*$gdb_prompt $" {
+ -re "Connected to.*$additional_text.*$gdb_prompt $" {
verbose "Set target to $targetname"
return 0
}
# Leave it there for the test to diagnose.
return 1
}
+ -re ": Network is unreachable.\r\n.*$gdb_prompt $" {
+ return 2
+ }
timeout {
send_gdb "\ 3"
break
return 1
}
+# Like gdb_target_cmd_ext, but returns 0 on success, 1 on failure.
+
+proc gdb_target_cmd { args } {
+ set res [eval gdb_target_cmd_ext $args]
+ return [expr $res == 0 ? 0 : 1]
+}
global portnum
set portnum "2345"
return 1
}
+ # If GDB is lack of XML support, and targets, like arm, have
+ # multiple target descriptions, GDB doesn't know which target
+ # description GDBserver uses, and may fail to parse 'g' packet
+ # after connection.
+ if { [gdb_skip_xml_test]
+ && ([istarget "arm*-*-linux*"]
+ || [istarget "mips*-*-linux*"]
+ || [istarget "powerpc*-*-linux*"]
+ || [istarget "s390*-*-linux*"]
+ || [istarget "x86_64-*-linux*"]
+ || [istarget "i\[34567\]86-*-linux*"]) } {
+ return 1
+ }
+
return 0
}
global gdbserver_server_exec
global last_loaded_file
+ if { ![info exists last_loaded_file] } {
+ return ""
+ }
+
set host_exec $last_loaded_file
# If we already downloaded a file to the target, see if we can reuse it.
if { $reuse == 0 } {
set gdbserver_host_exec $host_exec
set gdbserver_host_mtime [file mtime $host_exec]
- if [is_remote target] {
- set gdbserver_server_exec [gdb_download $host_exec]
- } else {
- set gdbserver_server_exec $host_exec
- }
+ set gdbserver_server_exec [gdb_remote_download target $host_exec]
}
return $gdbserver_server_exec
# Default routine to compute the "comm" argument for gdbserver.
proc gdbserver_default_get_comm_port { port } {
- return ":$port"
+ return "$port"
}
# Start a gdbserver process with initial OPTIONS and trailing ARGUMENTS.
proc gdbserver_start { options arguments } {
global portnum
+ global GDB_TEST_SOCKETHOST
# Port id -- either specified in baseboard file, or managed here.
if [target_info exists gdb,socketport] {
}
# Extract the local and remote host ids from the target board struct.
- if [target_info exists sockethost] {
+ if { [info exists GDB_TEST_SOCKETHOST] } {
+ # The user is not supposed to provide a port number, just a
+ # hostname/address, therefore we add the trailing ":" here.
+ set debughost "${GDB_TEST_SOCKETHOST}:"
+ # Escape open and close square brackets.
+ set debughost_tmp [string map { [ \\[ ] \\] } $debughost]
+ # We need a "gdbserver" version of the debughost, which will
+ # have the possible connection prefix stripped. This is
+ # because gdbserver currently doesn't recognize the prefixes.
+ regsub -all "^\(tcp:|udp:|tcp4:|udp4:|tcp6:|udp6:\)" $debughost_tmp "" debughost_gdbserver
+ } elseif [target_info exists sockethost] {
set debughost [target_info sockethost]
+ set debughost_gdbserver $debughost
} else {
set debughost "localhost:"
+ set debughost_gdbserver $debughost
}
# Some boards use a different value for the port that is passed to
# If gdbserver_reconnect will be called $gdbserver_reconnect_p must be
# set to true already during gdbserver_start.
global gdbserver_reconnect_p
+ global srcdir
+ global subdir
if {![info exists gdbserver_reconnect_p] || !$gdbserver_reconnect_p} {
# GDB client could accidentally connect to a stale server.
- # append gdbserver_command " --debug --once"
append gdbserver_command " --once"
}
+ # Enable debug if set.
+ if [gdbserver_debug_enabled] {
+ global gdbserverdebug
+ set enabled 0
+ foreach entry [split $gdbserverdebug ,] {
+ switch -- $entry {
+ "debug" {
+ append gdbserver_command " --debug"
+ set enabled 1
+ }
+ "remote" {
+ append gdbserver_command " --remote-debug"
+ set enabled 1
+ }
+ }
+ }
+ # Ensure debugfile is only added if something has been enabled
+ if { $enabled } {
+ set debugfile [standard_output_file gdbserver.debug]
+ append gdbserver_command " --debug-file=$debugfile"
+ }
+ }
+
if { $options != "" } {
append gdbserver_command " $options"
}
+ if { $debughost_gdbserver != "" } {
+ append gdbserver_command " $debughost_gdbserver"
+ }
if { $portnum != "" } {
- append gdbserver_command " [$get_comm_port $portnum]"
+ if { $debughost_gdbserver == "" } {
+ append gdbserver_command " "
+ }
+ append gdbserver_command "[$get_comm_port $portnum]"
}
if { $arguments != "" } {
append gdbserver_command " $arguments"
}
+ gdbserver_write_cmd_file $gdbserver_command
+
+ global server_spawn_id
set server_spawn_id [remote_spawn target $gdbserver_command]
+ # GDBserver doesn't do inferior I/O through GDB. But we can
+ # talk to the program using GDBserver's tty instead.
+ global inferior_spawn_id
+ set inferior_spawn_id $server_spawn_id
+
# Wait for the server to open its TCP socket, so that GDB can connect.
expect {
-i $server_spawn_id
-timeout 120
-notransfer
-re "Listening on" { }
- -re "Can't bind address: Address already in use\\.\r\n" {
+ -re "Can't (bind address|listen on socket): Address already in use\\.\r\n" {
verbose -log "Port $portnum is already in use."
if ![target_info exists gdb,socketport] {
# Bump the port number to avoid the conflict.
continue
}
}
+ -re ".*: cannot resolve name: .*\r\n" {
+ error "gdbserver cannot resolve name."
+ }
+ timeout {
+ error "Timeout waiting for gdbserver response."
+ }
}
break
}
- # We can't just call close, because if gdbserver is local then that means
- # that it will get a SIGHUP. Doing it this way could also allow us to
- # get at the inferior's input or output if necessary, and means that we
- # don't need to redirect output.
- expect_background {
- -i $server_spawn_id
- full_buffer { }
- eof {
- # The spawn ID is already closed now (but not yet waited for).
- wait -i $expect_out(spawn_id)
- }
- }
-
return [list $protocol [$get_remote_address $debughost $portnum]]
}
return [gdbserver_start "" $arguments]
}
+# Close the GDBserver connection.
+
+proc close_gdbserver {} {
+ global server_spawn_id
+
+ # We can't just call close, because if gdbserver is local then that means
+ # that it will get a SIGHUP. Doing it this way could also allow us to
+ # get at the inferior's input or output if necessary, and means that we
+ # don't need to redirect output.
+
+ if {![info exists server_spawn_id]} {
+ return
+ }
+
+ verbose "Quitting GDBserver"
+
+ catch "close -i $server_spawn_id"
+ catch "wait -i $server_spawn_id"
+ unset server_spawn_id
+}
+
+# Hook into GDB exit, and close GDBserver. We must load this
+# explicitly here, and rename the procedures we want to override.
+load_lib mi-support.exp
+
+if { [info procs gdbserver_orig_gdb_exit] == "" } {
+ rename gdb_exit gdbserver_orig_gdb_exit
+ rename mi_gdb_exit gdbserver_orig_mi_gdb_exit
+}
+
+proc gdbserver_gdb_exit { is_mi } {
+ global gdb_spawn_id server_spawn_id
+ global gdb_prompt
+ global gdbserver_reconnect_p
+
+ # Leave GDBserver running if we're exiting GDB in order to
+ # reconnect to the same instance of GDBserver again.
+ if {[info exists gdbserver_reconnect_p] && $gdbserver_reconnect_p} {
+ if { $is_mi } {
+ gdbserver_orig_mi_gdb_exit
+ } else {
+ gdbserver_orig_gdb_exit
+ }
+ return
+ }
+
+ if {[info exists gdb_spawn_id] && [info exists server_spawn_id]} {
+ # GDB may be terminated in an expected way or an unexpected way,
+ # but DejaGNU doesn't know that, so gdb_spawn_id isn't unset.
+ # Catch the exceptions.
+ catch {
+ if { $is_mi } {
+ set monitor_exit "-interpreter-exec console \"monitor exit\""
+ } else {
+ set monitor_exit "monitor exit"
+ }
+ send_gdb "$monitor_exit\n";
+ # We use expect rather than gdb_expect because
+ # we want to suppress printing exception messages, otherwise,
+ # remote_expect, invoked by gdb_expect, prints the exceptions.
+ expect {
+ -i "$gdb_spawn_id" -re "$gdb_prompt $" {
+ exp_continue
+ }
+ -i "$server_spawn_id" eof {
+ wait -i $expect_out(spawn_id)
+ unset server_spawn_id
+ }
+ }
+ }
+ }
+ close_gdbserver
+
+ if { $is_mi } {
+ gdbserver_orig_mi_gdb_exit
+ } else {
+ gdbserver_orig_gdb_exit
+ }
+}
+
+proc gdb_exit {} {
+ gdbserver_gdb_exit 0
+}
+
+proc mi_gdb_exit {} {
+ gdbserver_gdb_exit 1
+}
+
# Start a gdbserver process running HOST_EXEC and pass CHILD_ARGS
-# to it. Return 0 on success, or non-zero on failure.
+# to it. Return 0 on success, or non-zero on failure: 2 if gdbserver
+# failed to start or 1 if we couldn't connect to it.
proc gdbserver_run { child_args } {
global gdbserver_protocol
# Kill anything running before we try to start gdbserver, in case
# we are sharing a serial connection.
global gdb_prompt
- send_gdb "kill\n"
+ send_gdb "kill\n" optional
gdb_expect 120 {
-re "Kill the program being debugged. .y or n. $" {
send_gdb "y\n"
}
}
- set res [gdbserver_spawn $child_args]
+ if { [catch { gdbserver_spawn $child_args } res] == 1 } {
+ perror $res
+ return 2
+ }
set gdbserver_protocol [lindex $res 0]
set gdbserver_gdbport [lindex $res 1]
return [gdb_target_cmd $gdbserver_protocol $gdbserver_gdbport]
}
-# Start and connect to a gdbserver in extended mode. Note this frobs
-# $gdbserver_protocol, so should be used only from a board that
-# usually connects in target remote mode.
-proc gdbserver_start_extended { } {
+# Start gdbserver in extended mode with OPTIONS and connect to it. Note
+# this frobs $gdbserver_protocol, so should be used only from a board
+# that usually connects in target remote mode.
+proc gdbserver_start_extended { {options ""} } {
global gdbserver_protocol
global gdbserver_gdbport
global use_gdb_stub
- set res [gdbserver_start "--multi" ""]
+ set gdbserver_options "--multi"
+
+ if { $options != "" } {
+ append gdbserver_options " $options"
+ }
+
+ if { [catch { gdbserver_start $gdbserver_options "" } res] == 1 } {
+ perror $res
+ return 2
+ }
set gdbserver_protocol [lindex $res 0]
if { [string first "extended-" $gdbserver_protocol] != 0} {
set gdbserver_protocol "extended-$gdbserver_protocol"
global gdbserver_protocol
global gdbserver_gdbport
- set res [gdbserver_start "--multi" ""]
+ if { [catch { gdbserver_start "--multi" "" } res] == 1 } {
+ perror $res
+ return 2
+ }
set gdbserver_protocol [lindex $res 0]
set gdbserver_gdbport [lindex $res 1]
global gdbserver_protocol
global gdbserver_gdbport
- set res [gdbserver_start "--multi" ""]
+ if { [catch { gdbserver_start "--multi" "" } res] == 1 } {
+ perror $res
+ return 2
+ }
set gdbserver_protocol [lindex $res 0]
set gdbserver_gdbport [lindex $res 1]
return [mi_gdb_target_cmd $gdbserver_protocol $gdbserver_gdbport]
}
+
+# Check if debugging is enabled for gdbserver.
+
+proc gdbserver_debug_enabled { } {
+ global gdbserverdebug
+
+ # If not already read, get the debug setting from environment or board setting.
+ if ![info exists gdbserverdebug] {
+ global env
+ if [info exists env(GDBSERVER_DEBUG)] {
+ set gdbserverdebug $env(GDBSERVER_DEBUG)
+ } elseif [target_info exists gdbserver,debug] {
+ set gdbserverdebug [target_info gdbserver,debug]
+ } else {
+ return 0
+ }
+ }
+
+ # Expand the all option
+ if { $gdbserverdebug == "all" } {
+ set gdbserverdebug "debug,remote,replay"
+ }
+
+ # Ensure it is not empty.
+ return [expr { $gdbserverdebug != "" }]
+}
+
+# Write the command line used to invocate gdbserver to the cmd file.
+
+proc gdbserver_write_cmd_file { cmdline } {
+ set logfile [standard_output_file_with_gdb_instance gdbserver.cmd]
+ set cmd_file [open $logfile w]
+ puts $cmd_file $cmdline
+ catch "close $cmd_file"
+}
+
+# Override gdb_debug_init so that we can set replay logging in GDB if required.
+# Backup the original function so we can call it afterwards
+
+rename gdb_debug_init _gdb_debug_init
+
+proc gdb_debug_init { } {
+ global gdbserverdebug
+ global gdb_prompt
+
+ if [gdbserver_debug_enabled] {
+ foreach entry [split $gdbserverdebug ,] {
+ if { $entry == "replay" } {
+ set replayfile [standard_output_file_with_gdb_instance gdbserver.replay]
+ send_gdb "set remotelogfile $replayfile\n" optional
+ gdb_expect 10 {
+ -re "$gdb_prompt $" {}
+ }
+ }
+ }
+ }
+
+ # Now call the standard debug init function
+ _gdb_debug_init
+}
projects / deliverable / binutils-gdb.git / blobdiff