/* Tracing functionality for remote targets in custom GDB protocol
- Copyright (C) 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free
- Software Foundation, Inc.
+ Copyright (C) 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
+ 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor,
- Boston, MA 02110-1301, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
+#include "arch-utils.h"
#include "symtab.h"
#include "frame.h"
#include "gdbtypes.h"
#include "language.h"
#include "gdb_string.h"
#include "inferior.h"
+#include "breakpoint.h"
#include "tracepoint.h"
-#include "remote.h"
#include "linespec.h"
#include "regcache.h"
#include "completer.h"
-#include "gdb-events.h"
#include "block.h"
#include "dictionary.h"
+#include "observer.h"
+#include "user-regs.h"
+#include "valprint.h"
+#include "gdbcore.h"
+#include "objfiles.h"
+#include "filenames.h"
+#include "gdbthread.h"
+#include "stack.h"
+#include "gdbcore.h"
#include "ax.h"
#include "ax-gdb.h"
#include <unistd.h>
#endif
+#ifndef O_LARGEFILE
+#define O_LARGEFILE 0
+#endif
+
+extern int hex2bin (const char *hex, gdb_byte *bin, int count);
+extern int bin2hex (const gdb_byte *bin, char *hex, int count);
+
+extern void stop_tracing ();
+
/* Maximum length of an agent aexpression.
This accounts for the fact that packets are limited to 400 bytes
(which includes everything -- including the checksum), and assumes
large. (400 - 31)/2 == 184 */
#define MAX_AGENT_EXPR_LEN 184
+/* A hook used to notify the UI of tracepoint operations. */
+
+void (*deprecated_trace_find_hook) (char *arg, int from_tty);
+void (*deprecated_trace_start_stop_hook) (int start, int from_tty);
extern void (*deprecated_readline_begin_hook) (char *, ...);
extern char *(*deprecated_readline_hook) (char *);
extern void (*deprecated_readline_end_hook) (void);
-extern void x_command (char *, int);
-extern int addressprint; /* Print machine addresses? */
/* GDB commands implemented in other modules:
*/
/* ======= Important global variables: ======= */
-/* Chain of all tracepoints defined. */
-struct tracepoint *tracepoint_chain;
+/* The list of all trace state variables. We don't retain pointers to
+ any of these for any reason - API is by name or number only - so it
+ works to have a vector of objects. */
+
+typedef struct trace_state_variable tsv_s;
+DEF_VEC_O(tsv_s);
+
+static VEC(tsv_s) *tvariables;
+
+/* The next integer to assign to a variable. */
-/* Number of last tracepoint made. */
-static int tracepoint_count;
+static int next_tsv_number = 1;
/* Number of last traceframe collected. */
static int traceframe_number;
/* Tracing command lists */
static struct cmd_list_element *tfindlist;
+/* List of expressions to collect by default at each tracepoint hit. */
+char *default_collect = "";
+
+static int disconnected_tracing;
+
+/* This variable controls whether we ask the target for a linear or
+ circular trace buffer. */
+
+static int circular_trace_buffer;
+
/* ======= Important command functions: ======= */
-static void trace_command (char *, int);
-static void tracepoints_info (char *, int);
-static void delete_trace_command (char *, int);
-static void enable_trace_command (char *, int);
-static void disable_trace_command (char *, int);
-static void trace_pass_command (char *, int);
static void trace_actions_command (char *, int);
static void trace_start_command (char *, int);
static void trace_stop_command (char *, int);
static void trace_find_line_command (char *, int);
static void trace_find_range_command (char *, int);
static void trace_find_outside_command (char *, int);
-static void tracepoint_save_command (char *, int);
static void trace_dump_command (char *, int);
/* support routines */
-static void trace_mention (struct tracepoint *);
struct collection_list;
static void add_aexpr (struct collection_list *, struct agent_expr *);
static char *mem2hex (gdb_byte *, char *, int);
static void add_register (struct collection_list *collection,
unsigned int regno);
-static struct cleanup *make_cleanup_free_actions (struct tracepoint *t);
-static void free_actions_list (char **actions_list);
-static void free_actions_list_cleanup_wrapper (void *);
-extern void _initialize_tracepoint (void);
+extern void send_disconnected_tracing_value (int value);
-/* Utility: returns true if "target remote" */
-static int
-target_is_remote (void)
-{
- if (current_target.to_shortname &&
- (strcmp (current_target.to_shortname, "remote") == 0
- || strcmp (current_target.to_shortname, "extended-remote") == 0))
- return 1;
- else
- return 0;
-}
+static void free_uploaded_tps (struct uploaded_tp **utpp);
+static void free_uploaded_tsvs (struct uploaded_tsv **utsvp);
-/* Utility: generate error from an incoming stub packet. */
-static void
-trace_error (char *buf)
-{
- if (*buf++ != 'E')
- return; /* not an error msg */
- switch (*buf)
- {
- case '1': /* malformed packet error */
- if (*++buf == '0') /* general case: */
- error (_("tracepoint.c: error in outgoing packet."));
- else
- error (_("tracepoint.c: error in outgoing packet at field #%ld."),
- strtol (buf, NULL, 16));
- case '2':
- error (_("trace API error 0x%s."), ++buf);
- default:
- error (_("Target returns error code '%s'."), buf);
- }
-}
-/* Utility: wait for reply from stub, while accepting "O" packets. */
-static char *
-remote_get_noisy_reply (char *buf,
- long sizeof_buf)
-{
- do /* Loop on reply from remote stub. */
- {
- QUIT; /* allow user to bail out with ^C */
- getpkt (buf, sizeof_buf, 0);
- if (buf[0] == 0)
- error (_("Target does not support this command."));
- else if (buf[0] == 'E')
- trace_error (buf);
- else if (buf[0] == 'O' &&
- buf[1] != 'K')
- remote_console_output (buf + 1); /* 'O' message from stub */
- else
- return buf; /* here's the actual reply */
- }
- while (1);
-}
+extern void _initialize_tracepoint (void);
-/* Set tracepoint count to NUM. */
-static void
-set_tracepoint_count (int num)
+static struct trace_status trace_status;
+
+char *stop_reason_names[] = {
+ "tunknown",
+ "tnotrun",
+ "tstop",
+ "tfull",
+ "tdisconnected",
+ "tpasscount",
+ "terror"
+};
+
+struct trace_status *
+current_trace_status ()
{
- tracepoint_count = num;
- set_internalvar (lookup_internalvar ("tpnum"),
- value_from_longest (builtin_type_int, (LONGEST) num));
+ return &trace_status;
}
/* Set traceframe number to NUM. */
set_traceframe_num (int num)
{
traceframe_number = num;
- set_internalvar (lookup_internalvar ("trace_frame"),
- value_from_longest (builtin_type_int, (LONGEST) num));
+ set_internalvar_integer (lookup_internalvar ("trace_frame"), num);
}
/* Set tracepoint number to NUM. */
set_tracepoint_num (int num)
{
tracepoint_number = num;
- set_internalvar (lookup_internalvar ("tracepoint"),
- value_from_longest (builtin_type_int,
- (LONGEST) num));
+ set_internalvar_integer (lookup_internalvar ("tracepoint"), num);
}
/* Set externally visible debug variables for querying/printing
the traceframe context (line, function, file) */
static void
-set_traceframe_context (CORE_ADDR trace_pc)
+set_traceframe_context (struct frame_info *trace_frame)
{
- static struct type *func_string, *file_string;
- static struct type *func_range, *file_range;
- struct value *func_val;
- struct value *file_val;
- static struct type *charstar;
- int len;
-
- if (charstar == (struct type *) NULL)
- charstar = lookup_pointer_type (builtin_type_char);
+ CORE_ADDR trace_pc;
- if (trace_pc == -1) /* Cease debugging any trace buffers. */
+ if (trace_frame == NULL) /* Cease debugging any trace buffers. */
{
traceframe_fun = 0;
traceframe_sal.pc = traceframe_sal.line = 0;
traceframe_sal.symtab = NULL;
- set_internalvar (lookup_internalvar ("trace_func"),
- value_from_pointer (charstar, (LONGEST) 0));
- set_internalvar (lookup_internalvar ("trace_file"),
- value_from_pointer (charstar, (LONGEST) 0));
- set_internalvar (lookup_internalvar ("trace_line"),
- value_from_longest (builtin_type_int,
- (LONGEST) - 1));
+ clear_internalvar (lookup_internalvar ("trace_func"));
+ clear_internalvar (lookup_internalvar ("trace_file"));
+ set_internalvar_integer (lookup_internalvar ("trace_line"), -1);
return;
}
/* Save as globals for internal use. */
+ trace_pc = get_frame_pc (trace_frame);
traceframe_sal = find_pc_line (trace_pc, 0);
traceframe_fun = find_pc_function (trace_pc);
/* Save linenumber as "$trace_line", a debugger variable visible to
users. */
- set_internalvar (lookup_internalvar ("trace_line"),
- value_from_longest (builtin_type_int,
- (LONGEST) traceframe_sal.line));
+ set_internalvar_integer (lookup_internalvar ("trace_line"),
+ traceframe_sal.line);
/* Save func name as "$trace_func", a debugger variable visible to
users. */
- if (traceframe_fun == NULL ||
- DEPRECATED_SYMBOL_NAME (traceframe_fun) == NULL)
- set_internalvar (lookup_internalvar ("trace_func"),
- value_from_pointer (charstar, (LONGEST) 0));
+ if (traceframe_fun == NULL
+ || SYMBOL_LINKAGE_NAME (traceframe_fun) == NULL)
+ clear_internalvar (lookup_internalvar ("trace_func"));
else
- {
- len = strlen (DEPRECATED_SYMBOL_NAME (traceframe_fun));
- func_range = create_range_type (func_range,
- builtin_type_int, 0, len - 1);
- func_string = create_array_type (func_string,
- builtin_type_char, func_range);
- func_val = allocate_value (func_string);
- deprecated_set_value_type (func_val, func_string);
- memcpy (value_contents_raw (func_val),
- DEPRECATED_SYMBOL_NAME (traceframe_fun),
- len);
- deprecated_set_value_modifiable (func_val, 0);
- set_internalvar (lookup_internalvar ("trace_func"), func_val);
- }
+ set_internalvar_string (lookup_internalvar ("trace_func"),
+ SYMBOL_LINKAGE_NAME (traceframe_fun));
/* Save file name as "$trace_file", a debugger variable visible to
users. */
- if (traceframe_sal.symtab == NULL ||
- traceframe_sal.symtab->filename == NULL)
- set_internalvar (lookup_internalvar ("trace_file"),
- value_from_pointer (charstar, (LONGEST) 0));
+ if (traceframe_sal.symtab == NULL
+ || traceframe_sal.symtab->filename == NULL)
+ clear_internalvar (lookup_internalvar ("trace_file"));
else
- {
- len = strlen (traceframe_sal.symtab->filename);
- file_range = create_range_type (file_range,
- builtin_type_int, 0, len - 1);
- file_string = create_array_type (file_string,
- builtin_type_char, file_range);
- file_val = allocate_value (file_string);
- deprecated_set_value_type (file_val, file_string);
- memcpy (value_contents_raw (file_val),
- traceframe_sal.symtab->filename,
- len);
- deprecated_set_value_modifiable (file_val, 0);
- set_internalvar (lookup_internalvar ("trace_file"), file_val);
- }
+ set_internalvar_string (lookup_internalvar ("trace_file"),
+ traceframe_sal.symtab->filename);
}
-/* Low level routine to set a tracepoint.
- Returns the tracepoint object so caller can set other things.
- Does not set the tracepoint number!
- Does not print anything.
+/* Create a new trace state variable with the given name. */
- ==> This routine should not be called if there is a chance of later
- error(); otherwise it leaves a bogus tracepoint on the chain.
- Validate your arguments BEFORE calling this routine! */
-
-static struct tracepoint *
-set_raw_tracepoint (struct symtab_and_line sal)
+struct trace_state_variable *
+create_trace_state_variable (const char *name)
{
- struct tracepoint *t, *tc;
- struct cleanup *old_chain;
+ struct trace_state_variable tsv;
- t = (struct tracepoint *) xmalloc (sizeof (struct tracepoint));
- old_chain = make_cleanup (xfree, t);
- memset (t, 0, sizeof (*t));
- t->address = sal.pc;
- if (sal.symtab == NULL)
- t->source_file = NULL;
- else
- t->source_file = savestring (sal.symtab->filename,
- strlen (sal.symtab->filename));
-
- t->section = sal.section;
- t->language = current_language->la_language;
- t->input_radix = input_radix;
- t->line_number = sal.line;
- t->enabled_p = 1;
- t->next = 0;
- t->step_count = 0;
- t->pass_count = 0;
- t->addr_string = NULL;
-
- /* Add this tracepoint to the end of the chain
- so that a list of tracepoints will come out in order
- of increasing numbers. */
-
- tc = tracepoint_chain;
- if (tc == 0)
- tracepoint_chain = t;
- else
- {
- while (tc->next)
- tc = tc->next;
- tc->next = t;
- }
- discard_cleanups (old_chain);
- return t;
+ memset (&tsv, 0, sizeof (tsv));
+ tsv.name = xstrdup (name);
+ tsv.number = next_tsv_number++;
+ return VEC_safe_push (tsv_s, tvariables, &tsv);
}
-/* Set a tracepoint according to ARG (function, linenum or *address). */
-static void
-trace_command (char *arg, int from_tty)
-{
- char **canonical = (char **) NULL;
- struct symtabs_and_lines sals;
- struct symtab_and_line sal;
- struct tracepoint *t;
- char *addr_start = 0, *addr_end = 0;
- int i;
-
- if (!arg || !*arg)
- error (_("trace command requires an argument"));
-
- if (from_tty && info_verbose)
- printf_filtered ("TRACE %s\n", arg);
-
- addr_start = arg;
- sals = decode_line_1 (&arg, 1, (struct symtab *) NULL,
- 0, &canonical, NULL);
- addr_end = arg;
- if (!sals.nelts)
- return; /* ??? Presumably decode_line_1 has already warned? */
+/* Look for a trace state variable of the given name. */
- /* Resolve all line numbers to PC's */
- for (i = 0; i < sals.nelts; i++)
- resolve_sal_pc (&sals.sals[i]);
-
- /* Now set all the tracepoints. */
- for (i = 0; i < sals.nelts; i++)
- {
- sal = sals.sals[i];
-
- t = set_raw_tracepoint (sal);
- set_tracepoint_count (tracepoint_count + 1);
- t->number = tracepoint_count;
-
- /* If a canonical line spec is needed use that instead of the
- command string. */
- if (canonical != (char **) NULL && canonical[i] != NULL)
- t->addr_string = canonical[i];
- else if (addr_start)
- t->addr_string = savestring (addr_start, addr_end - addr_start);
+struct trace_state_variable *
+find_trace_state_variable (const char *name)
+{
+ struct trace_state_variable *tsv;
+ int ix;
- trace_mention (t);
- }
+ for (ix = 0; VEC_iterate (tsv_s, tvariables, ix, tsv); ++ix)
+ if (strcmp (name, tsv->name) == 0)
+ return tsv;
- if (sals.nelts > 1)
- {
- printf_filtered ("Multiple tracepoints were set.\n");
- printf_filtered ("Use 'delete trace' to delete unwanted tracepoints.\n");
- }
+ return NULL;
}
-/* Tell the user we have just set a tracepoint TP. */
-
-static void
-trace_mention (struct tracepoint *tp)
+void
+delete_trace_state_variable (const char *name)
{
- printf_filtered ("Tracepoint %d", tp->number);
+ struct trace_state_variable *tsv;
+ int ix;
- if (addressprint || (tp->source_file == NULL))
- {
- printf_filtered (" at ");
- deprecated_print_address_numeric (tp->address, 1, gdb_stdout);
- }
- if (tp->source_file)
- printf_filtered (": file %s, line %d.",
- tp->source_file, tp->line_number);
+ for (ix = 0; VEC_iterate (tsv_s, tvariables, ix, tsv); ++ix)
+ if (strcmp (name, tsv->name) == 0)
+ {
+ xfree ((void *)tsv->name);
+ VEC_unordered_remove (tsv_s, tvariables, ix);
+ return;
+ }
- printf_filtered ("\n");
+ warning (_("No trace variable named \"$%s\", not deleting"), name);
}
-/* Print information on tracepoint number TPNUM_EXP, or all if
- omitted. */
+/* The 'tvariable' command collects a name and optional expression to
+ evaluate into an initial value. */
-static void
-tracepoints_info (char *tpnum_exp, int from_tty)
+void
+trace_variable_command (char *args, int from_tty)
{
- struct tracepoint *t;
- struct action_line *action;
- int found_a_tracepoint = 0;
- char wrap_indent[80];
- struct symbol *sym;
- int tpnum = -1;
-
- if (tpnum_exp)
- tpnum = parse_and_eval_long (tpnum_exp);
-
- ALL_TRACEPOINTS (t)
- if (tpnum == -1 || tpnum == t->number)
- {
- extern int addressprint; /* Print machine addresses? */
-
- if (!found_a_tracepoint++)
- {
- printf_filtered ("Num Enb ");
- if (addressprint)
- {
- if (TARGET_ADDR_BIT <= 32)
- printf_filtered ("Address ");
- else
- printf_filtered ("Address ");
- }
- printf_filtered ("PassC StepC What\n");
- }
- strcpy (wrap_indent, " ");
- if (addressprint)
- {
- if (TARGET_ADDR_BIT <= 32)
- strcat (wrap_indent, " ");
- else
- strcat (wrap_indent, " ");
- }
-
- printf_filtered ("%-3d %-3s ", t->number,
- t->enabled_p ? "y" : "n");
- if (addressprint)
- {
- char *tmp;
+ struct expression *expr;
+ struct cleanup *old_chain;
+ struct internalvar *intvar = NULL;
+ LONGEST initval = 0;
+ struct trace_state_variable *tsv;
- if (TARGET_ADDR_BIT <= 32)
- tmp = hex_string_custom (t->address & (CORE_ADDR) 0xffffffff,
- 8);
- else
- tmp = hex_string_custom (t->address, 16);
+ if (!args || !*args)
+ error_no_arg (_("trace state variable name"));
- printf_filtered ("%s ", tmp);
- }
- printf_filtered ("%-5d %-5ld ", t->pass_count, t->step_count);
+ /* All the possible valid arguments are expressions. */
+ expr = parse_expression (args);
+ old_chain = make_cleanup (free_current_contents, &expr);
- if (t->source_file)
- {
- sym = find_pc_sect_function (t->address, t->section);
- if (sym)
- {
- fputs_filtered ("in ", gdb_stdout);
- fputs_filtered (SYMBOL_PRINT_NAME (sym), gdb_stdout);
- wrap_here (wrap_indent);
- fputs_filtered (" at ", gdb_stdout);
- }
- fputs_filtered (t->source_file, gdb_stdout);
- printf_filtered (":%d", t->line_number);
- }
- else
- print_address_symbolic (t->address, gdb_stdout, demangle, " ");
+ if (expr->nelts == 0)
+ error (_("No expression?"));
- printf_filtered ("\n");
- if (t->actions)
- {
- printf_filtered (" Actions for tracepoint %d: \n", t->number);
- for (action = t->actions; action; action = action->next)
- {
- printf_filtered ("\t%s\n", action->action);
- }
- }
+ /* Only allow two syntaxes; "$name" and "$name=value". */
+ if (expr->elts[0].opcode == OP_INTERNALVAR)
+ {
+ intvar = expr->elts[1].internalvar;
}
- if (!found_a_tracepoint)
+ else if (expr->elts[0].opcode == BINOP_ASSIGN
+ && expr->elts[1].opcode == OP_INTERNALVAR)
{
- if (tpnum == -1)
- printf_filtered ("No tracepoints.\n");
- else
- printf_filtered ("No tracepoint number %d.\n", tpnum);
+ intvar = expr->elts[2].internalvar;
+ initval = value_as_long (evaluate_subexpression_type (expr, 4));
}
-}
-
-/* Optimization: the code to parse an enable, disable, or delete TP
- command is virtually identical except for whether it performs an
- enable, disable, or delete. Therefore I've combined them into one
- function with an opcode. */
-enum tracepoint_opcode
-{
- enable_op,
- disable_op,
- delete_op
-};
+ else
+ error (_("Syntax must be $NAME [ = EXPR ]"));
-/* This function implements enable, disable and delete commands. */
-static void
-tracepoint_operation (struct tracepoint *t, int from_tty,
- enum tracepoint_opcode opcode)
-{
- struct tracepoint *t2;
+ if (!intvar)
+ error (_("No name given"));
- if (t == NULL) /* no tracepoint operand */
- return;
+ if (strlen (internalvar_name (intvar)) <= 0)
+ error (_("Must supply a non-empty variable name"));
- switch (opcode)
+ /* If the variable already exists, just change its initial value. */
+ tsv = find_trace_state_variable (internalvar_name (intvar));
+ if (tsv)
{
- case enable_op:
- t->enabled_p = 1;
- tracepoint_modify_event (t->number);
- break;
- case disable_op:
- t->enabled_p = 0;
- tracepoint_modify_event (t->number);
- break;
- case delete_op:
- if (tracepoint_chain == t)
- tracepoint_chain = t->next;
+ tsv->initial_value = initval;
+ printf_filtered (_("Trace state variable $%s now has initial value %s.\n"),
+ tsv->name, plongest (tsv->initial_value));
+ return;
+ }
- ALL_TRACEPOINTS (t2)
- if (t2->next == t)
- {
- tracepoint_delete_event (t2->number);
- t2->next = t->next;
- break;
- }
+ /* Create a new variable. */
+ tsv = create_trace_state_variable (internalvar_name (intvar));
+ tsv->initial_value = initval;
- if (t->addr_string)
- xfree (t->addr_string);
- if (t->source_file)
- xfree (t->source_file);
- if (t->actions)
- free_actions (t);
+ printf_filtered (_("Trace state variable $%s created, with initial value %s.\n"),
+ tsv->name, plongest (tsv->initial_value));
- xfree (t);
- break;
- }
+ do_cleanups (old_chain);
}
-/* Utility: parse a tracepoint number and look it up in the list.
- If MULTI_P is true, there might be a range of tracepoints in ARG.
- if OPTIONAL_P is true, then if the argument is missing, the most
- recent tracepoint (tracepoint_count) is returned. */
-struct tracepoint *
-get_tracepoint_by_number (char **arg, int multi_p, int optional_p)
+void
+delete_trace_variable_command (char *args, int from_tty)
{
- struct tracepoint *t;
- int tpnum;
- char *instring = arg == NULL ? NULL : *arg;
+ int i, ix;
+ char **argv;
+ struct cleanup *back_to;
+ struct trace_state_variable *tsv;
- if (arg == NULL || *arg == NULL || ! **arg)
+ if (args == NULL)
{
- if (optional_p)
- tpnum = tracepoint_count;
- else
- error_no_arg (_("tracepoint number"));
+ if (query (_("Delete all trace state variables? ")))
+ VEC_free (tsv_s, tvariables);
+ dont_repeat ();
+ return;
}
- else
- tpnum = multi_p ? get_number_or_range (arg) : get_number (arg);
- if (tpnum <= 0)
+ argv = gdb_buildargv (args);
+ back_to = make_cleanup_freeargv (argv);
+
+ for (i = 0; argv[i] != NULL; i++)
{
- if (instring && *instring)
- printf_filtered ("bad tracepoint number at or near '%s'\n",
- instring);
+ if (*argv[i] == '$')
+ delete_trace_state_variable (argv[i] + 1);
else
- printf_filtered ("Tracepoint argument missing and no previous tracepoint\n");
- return NULL;
+ warning (_("Name \"%s\" not prefixed with '$', ignoring"), argv[i]);
}
- ALL_TRACEPOINTS (t)
- if (t->number == tpnum)
- {
- return t;
- }
+ do_cleanups (back_to);
- /* FIXME: if we are in the middle of a range we don't want to give
- a message. The current interface to get_number_or_range doesn't
- allow us to discover this. */
- printf_unfiltered ("No tracepoint number %d.\n", tpnum);
- return NULL;
+ dont_repeat ();
}
-/* Utility:
- parse a list of tracepoint numbers, and call a func for each. */
-static void
-map_args_over_tracepoints (char *args, int from_tty,
- enum tracepoint_opcode opcode)
+void
+tvariables_info_1 (void)
{
- struct tracepoint *t, *tmp;
+ struct trace_state_variable *tsv;
+ int ix;
+ int count = 0;
+ struct cleanup *back_to;
- if (args == 0 || *args == 0) /* do them all */
- ALL_TRACEPOINTS_SAFE (t, tmp)
- tracepoint_operation (t, from_tty, opcode);
- else
- while (*args)
- {
- QUIT; /* Give user option to bail out with ^C. */
- t = get_tracepoint_by_number (&args, 1, 0);
- tracepoint_operation (t, from_tty, opcode);
- while (*args == ' ' || *args == '\t')
- args++;
- }
-}
+ if (VEC_length (tsv_s, tvariables) == 0 && !ui_out_is_mi_like_p (uiout))
+ {
+ printf_filtered (_("No trace state variables.\n"));
+ return;
+ }
-/* The 'enable trace' command enables tracepoints.
- Not supported by all targets. */
-static void
-enable_trace_command (char *args, int from_tty)
-{
- dont_repeat ();
- map_args_over_tracepoints (args, from_tty, enable_op);
-}
+ /* Try to acquire values from the target. */
+ for (ix = 0; VEC_iterate (tsv_s, tvariables, ix, tsv); ++ix, ++count)
+ tsv->value_known = target_get_trace_state_variable_value (tsv->number,
+ &(tsv->value));
-/* The 'disable trace' command disables tracepoints.
- Not supported by all targets. */
-static void
-disable_trace_command (char *args, int from_tty)
-{
- dont_repeat ();
- map_args_over_tracepoints (args, from_tty, disable_op);
-}
+ back_to = make_cleanup_ui_out_table_begin_end (uiout, 3,
+ count, "trace-variables");
+ ui_out_table_header (uiout, 15, ui_left, "name", "Name");
+ ui_out_table_header (uiout, 11, ui_left, "initial", "Initial");
+ ui_out_table_header (uiout, 11, ui_left, "current", "Current");
-/* Remove a tracepoint (or all if no argument) */
-static void
-delete_trace_command (char *args, int from_tty)
-{
- dont_repeat ();
- if (!args || !*args) /* No args implies all tracepoints; */
- if (from_tty) /* confirm only if from_tty... */
- if (tracepoint_chain) /* and if there are tracepoints to
- delete! */
- if (!query ("Delete all tracepoints? "))
- return;
+ ui_out_table_body (uiout);
- map_args_over_tracepoints (args, from_tty, delete_op);
-}
+ for (ix = 0; VEC_iterate (tsv_s, tvariables, ix, tsv); ++ix)
+ {
+ struct cleanup *back_to2;
+ char *c;
+ char *name;
+
+ back_to2 = make_cleanup_ui_out_tuple_begin_end (uiout, "variable");
+
+ name = concat ("$", tsv->name, NULL);
+ make_cleanup (xfree, name);
+ ui_out_field_string (uiout, "name", name);
+ ui_out_field_string (uiout, "initial", plongest (tsv->initial_value));
+
+ if (tsv->value_known)
+ c = plongest (tsv->value);
+ else if (ui_out_is_mi_like_p (uiout))
+ /* For MI, we prefer not to use magic string constants, but rather
+ omit the field completely. The difference between unknown and
+ undefined does not seem important enough to represent. */
+ c = NULL;
+ else if (current_trace_status ()->running || traceframe_number >= 0)
+ /* The value is/was defined, but we don't have it. */
+ c = "<unknown>";
+ else
+ /* It is not meaningful to ask about the value. */
+ c = "<undefined>";
+ if (c)
+ ui_out_field_string (uiout, "current", c);
+ ui_out_text (uiout, "\n");
-/* Set passcount for tracepoint.
+ do_cleanups (back_to2);
+ }
+
+ do_cleanups (back_to);
+}
- First command argument is passcount, second is tracepoint number.
- If tracepoint number omitted, apply to most recently defined.
- Also accepts special argument "all". */
+/* List all the trace state variables. */
static void
-trace_pass_command (char *args, int from_tty)
+tvariables_info (char *args, int from_tty)
{
- struct tracepoint *t1 = (struct tracepoint *) -1, *t2;
- unsigned int count;
- int all = 0;
-
- if (args == 0 || *args == 0)
- error (_("passcount command requires an argument (count + optional TP num)"));
-
- count = strtoul (args, &args, 10); /* Count comes first, then TP num. */
+ tvariables_info_1 ();
+}
- while (*args && isspace ((int) *args))
- args++;
+/* Stash definitions of tsvs into the given file. */
- if (*args && strncasecmp (args, "all", 3) == 0)
- {
- args += 3; /* Skip special argument "all". */
- all = 1;
- if (*args)
- error (_("Junk at end of arguments."));
- }
- else
- t1 = get_tracepoint_by_number (&args, 1, 1);
+void
+save_trace_state_variables (struct ui_file *fp)
+{
+ struct trace_state_variable *tsv;
+ int ix;
- do
+ for (ix = 0; VEC_iterate (tsv_s, tvariables, ix, tsv); ++ix)
{
- if (t1)
- {
- ALL_TRACEPOINTS (t2)
- if (t1 == (struct tracepoint *) -1 || t1 == t2)
- {
- t2->pass_count = count;
- tracepoint_modify_event (t2->number);
- if (from_tty)
- printf_filtered ("Setting tracepoint %d's passcount to %d\n",
- t2->number, count);
- }
- if (! all && *args)
- t1 = get_tracepoint_by_number (&args, 1, 0);
- }
+ fprintf_unfiltered (fp, "tvariable $%s", tsv->name);
+ if (tsv->initial_value)
+ fprintf_unfiltered (fp, " = %s", plongest (tsv->initial_value));
+ fprintf_unfiltered (fp, "\n");
}
- while (*args);
}
/* ACTIONS functions: */
-/* Prototypes for action-parsing utility commands */
-static void read_actions (struct tracepoint *);
-
/* The three functions:
collect_pseudocommand,
while_stepping_pseudocommand, and
it means that somebody issued the "command" at the top level,
which is always an error. */
-static void
+void
end_actions_pseudocommand (char *args, int from_tty)
{
error (_("This command cannot be used at the top level."));
}
-static void
+void
while_stepping_pseudocommand (char *args, int from_tty)
{
error (_("This command can only be used in a tracepoint actions list."));
error (_("This command can only be used in a tracepoint actions list."));
}
+static void
+teval_pseudocommand (char *args, int from_tty)
+{
+ error (_("This command can only be used in a tracepoint actions list."));
+}
+
/* Enter a list of actions for a tracepoint. */
static void
trace_actions_command (char *args, int from_tty)
{
- struct tracepoint *t;
- char tmpbuf[128];
- char *end_msg = "End with a line saying just \"end\".";
+ struct breakpoint *t;
+ struct command_line *l;
t = get_tracepoint_by_number (&args, 0, 1);
if (t)
{
- sprintf (tmpbuf, "Enter actions for tracepoint %d, one per line.",
- t->number);
-
- if (from_tty)
- {
- if (deprecated_readline_begin_hook)
- (*deprecated_readline_begin_hook) ("%s %s\n", tmpbuf, end_msg);
- else if (input_from_terminal_p ())
- printf_filtered ("%s\n%s\n", tmpbuf, end_msg);
- }
-
- free_actions (t);
- t->step_count = 0; /* read_actions may set this */
- read_actions (t);
-
- if (deprecated_readline_end_hook)
- (*deprecated_readline_end_hook) ();
- /* tracepoints_changed () */
+ char *tmpbuf =
+ xstrprintf ("Enter actions for tracepoint %d, one per line.",
+ t->number);
+ struct cleanup *cleanups = make_cleanup (xfree, tmpbuf);
+
+ l = read_command_lines (tmpbuf, from_tty, 1, check_tracepoint_command, t);
+ do_cleanups (cleanups);
+ breakpoint_set_commands (t, l);
}
/* else just return */
}
-/* worker function */
-static void
-read_actions (struct tracepoint *t)
-{
- char *line;
- char *prompt1 = "> ", *prompt2 = " > ";
- char *prompt = prompt1;
- enum actionline_type linetype;
- extern FILE *instream;
- struct action_line *next = NULL, *temp;
- struct cleanup *old_chain;
-
- /* Control-C quits instantly if typed while in this loop
- since it should not wait until the user types a newline. */
- immediate_quit++;
- /* FIXME: kettenis/20010823: Something is wrong here. In this file
- STOP_SIGNAL is never defined. So this code has been left out, at
- least for quite a while now. Replacing STOP_SIGNAL with SIGTSTP
- leads to compilation failures since the variable job_control
- isn't declared. Leave this alone for now. */
-#ifdef STOP_SIGNAL
- if (job_control)
- signal (STOP_SIGNAL, handle_stop_sig);
-#endif
- old_chain = make_cleanup_free_actions (t);
- while (1)
- {
- /* Make sure that all output has been output. Some machines may
- let you get away with leaving out some of the gdb_flush, but
- not all. */
- wrap_here ("");
- gdb_flush (gdb_stdout);
- gdb_flush (gdb_stderr);
-
- if (deprecated_readline_hook && instream == NULL)
- line = (*deprecated_readline_hook) (prompt);
- else if (instream == stdin && ISATTY (instream))
- {
- line = gdb_readline_wrapper (prompt);
- if (line && *line) /* add it to command history */
- add_history (line);
- }
- else
- line = gdb_readline (0);
-
- if (!line)
- line = "end";
-
- linetype = validate_actionline (&line, t);
- if (linetype == BADLINE)
- continue; /* already warned -- collect another line */
-
- temp = xmalloc (sizeof (struct action_line));
- temp->next = NULL;
- temp->action = line;
+/* Report the results of checking the agent expression, as errors or
+ internal errors. */
- if (next == NULL) /* first action for this tracepoint? */
- t->actions = next = temp;
- else
- {
- next->next = temp;
- next = temp;
- }
-
- if (linetype == STEPPING) /* begin "while-stepping" */
- {
- if (prompt == prompt2)
- {
- warning (_("Already processing 'while-stepping'"));
- continue;
- }
- else
- prompt = prompt2; /* change prompt for stepping actions */
- }
- else if (linetype == END)
- {
- if (prompt == prompt2)
- {
- prompt = prompt1; /* end of single-stepping actions */
- }
- else
- { /* end of actions */
- if (t->actions->next == NULL)
- {
- /* An "end" all by itself with no other actions
- means this tracepoint has no actions.
- Discard empty list. */
- free_actions (t);
- }
- break;
- }
- }
- }
-#ifdef STOP_SIGNAL
- if (job_control)
- signal (STOP_SIGNAL, SIG_DFL);
-#endif
- immediate_quit--;
- discard_cleanups (old_chain);
+static void
+report_agent_reqs_errors (struct agent_expr *aexpr, struct agent_reqs *areqs)
+{
+ /* All of the "flaws" are serious bytecode generation issues that
+ should never occur. */
+ if (areqs->flaw != agent_flaw_none)
+ internal_error (__FILE__, __LINE__, _("expression is malformed"));
+
+ /* If analysis shows a stack underflow, GDB must have done something
+ badly wrong in its bytecode generation. */
+ if (areqs->min_height < 0)
+ internal_error (__FILE__, __LINE__,
+ _("expression has min height < 0"));
+
+ /* Issue this error if the stack is predicted to get too deep. The
+ limit is rather arbitrary; a better scheme might be for the
+ target to report how much stack it will have available. The
+ depth roughly corresponds to parenthesization, so a limit of 20
+ amounts to 20 levels of expression nesting, which is actually
+ a pretty big hairy expression. */
+ if (areqs->max_height > 20)
+ error (_("Expression is too complicated."));
}
/* worker function */
-enum actionline_type
-validate_actionline (char **line, struct tracepoint *t)
+void
+validate_actionline (char **line, struct breakpoint *t)
{
struct cmd_list_element *c;
struct expression *exp = NULL;
struct cleanup *old_chain = NULL;
- char *p;
+ char *p, *tmp_p;
+ struct bp_location *loc;
+ struct agent_expr *aexpr;
+ struct agent_reqs areqs;
/* if EOF is typed, *line is NULL */
if (*line == NULL)
- return END;
+ return;
for (p = *line; isspace ((int) *p);)
p++;
/* Symbol lookup etc. */
if (*p == '\0') /* empty line: just prompt for another line. */
- return BADLINE;
+ return;
if (*p == '#') /* comment line */
- return GENERIC;
+ return;
c = lookup_cmd (&p, cmdlist, "", -1, 1);
if (c == 0)
- {
- warning (_("'%s' is not an action that I know, or is ambiguous."),
- p);
- return BADLINE;
- }
+ error (_("`%s' is not a tracepoint action, or is ambiguous."), p);
if (cmd_cfunc_eq (c, collect_pseudocommand))
{
- struct agent_expr *aexpr;
- struct agent_reqs areqs;
-
do
{ /* repeat over a comma-separated list */
QUIT; /* allow user to bail out with ^C */
}
/* else fall thru, treat p as an expression and parse it! */
}
- exp = parse_exp_1 (&p, block_for_pc (t->address), 1);
- old_chain = make_cleanup (free_current_contents, &exp);
-
- if (exp->elts[0].opcode == OP_VAR_VALUE)
+ tmp_p = p;
+ for (loc = t->loc; loc; loc = loc->next)
{
- if (SYMBOL_CLASS (exp->elts[2].symbol) == LOC_CONST)
- {
- warning (_("constant %s (value %ld) will not be collected."),
- DEPRECATED_SYMBOL_NAME (exp->elts[2].symbol),
- SYMBOL_VALUE (exp->elts[2].symbol));
- return BADLINE;
- }
- else if (SYMBOL_CLASS (exp->elts[2].symbol) == LOC_OPTIMIZED_OUT)
+ p = tmp_p;
+ exp = parse_exp_1 (&p, block_for_pc (loc->address), 1);
+ old_chain = make_cleanup (free_current_contents, &exp);
+
+ if (exp->elts[0].opcode == OP_VAR_VALUE)
{
- warning (_("%s is optimized away and cannot be collected."),
- DEPRECATED_SYMBOL_NAME (exp->elts[2].symbol));
- return BADLINE;
+ if (SYMBOL_CLASS (exp->elts[2].symbol) == LOC_CONST)
+ {
+ error (_("constant `%s' (value %ld) will not be collected."),
+ SYMBOL_PRINT_NAME (exp->elts[2].symbol),
+ SYMBOL_VALUE (exp->elts[2].symbol));
+ }
+ else if (SYMBOL_CLASS (exp->elts[2].symbol) == LOC_OPTIMIZED_OUT)
+ {
+ error (_("`%s' is optimized away and cannot be collected."),
+ SYMBOL_PRINT_NAME (exp->elts[2].symbol));
+ }
}
- }
-
- /* We have something to collect, make sure that the expr to
- bytecode translator can handle it and that it's not too
- long. */
- aexpr = gen_trace_for_expr (t->address, exp);
- make_cleanup_free_agent_expr (aexpr);
- if (aexpr->len > MAX_AGENT_EXPR_LEN)
- error (_("expression too complicated, try simplifying"));
+ /* We have something to collect, make sure that the expr to
+ bytecode translator can handle it and that it's not too
+ long. */
+ aexpr = gen_trace_for_expr (loc->address, exp);
+ make_cleanup_free_agent_expr (aexpr);
- ax_reqs (aexpr, &areqs);
- (void) make_cleanup (xfree, areqs.reg_mask);
+ if (aexpr->len > MAX_AGENT_EXPR_LEN)
+ error (_("Expression is too complicated."));
- if (areqs.flaw != agent_flaw_none)
- error (_("malformed expression"));
+ ax_reqs (aexpr, &areqs);
+ (void) make_cleanup (xfree, areqs.reg_mask);
- if (areqs.min_height < 0)
- error (_("gdb: Internal error: expression has min height < 0"));
+ report_agent_reqs_errors (aexpr, &areqs);
- if (areqs.max_height > 20)
- error (_("expression too complicated, try simplifying"));
-
- do_cleanups (old_chain);
+ do_cleanups (old_chain);
+ }
}
while (p && *p++ == ',');
- return GENERIC;
}
- else if (cmd_cfunc_eq (c, while_stepping_pseudocommand))
+
+ else if (cmd_cfunc_eq (c, teval_pseudocommand))
{
- char *steparg; /* in case warning is necessary */
+ do
+ { /* repeat over a comma-separated list */
+ QUIT; /* allow user to bail out with ^C */
+ while (isspace ((int) *p))
+ p++;
- while (isspace ((int) *p))
- p++;
- steparg = p;
+ tmp_p = p;
+ for (loc = t->loc; loc; loc = loc->next)
+ {
+ p = tmp_p;
+ /* Only expressions are allowed for this action. */
+ exp = parse_exp_1 (&p, block_for_pc (loc->address), 1);
+ old_chain = make_cleanup (free_current_contents, &exp);
- if (*p == '\0' ||
- (t->step_count = strtol (p, &p, 0)) == 0)
- {
- warning (_("'%s': bad step-count; command ignored."), *line);
- return BADLINE;
+ /* We have something to evaluate, make sure that the expr to
+ bytecode translator can handle it and that it's not too
+ long. */
+ aexpr = gen_eval_for_expr (loc->address, exp);
+ make_cleanup_free_agent_expr (aexpr);
+
+ if (aexpr->len > MAX_AGENT_EXPR_LEN)
+ error (_("Expression is too complicated."));
+
+ ax_reqs (aexpr, &areqs);
+ (void) make_cleanup (xfree, areqs.reg_mask);
+
+ report_agent_reqs_errors (aexpr, &areqs);
+
+ do_cleanups (old_chain);
+ }
}
- return STEPPING;
+ while (p && *p++ == ',');
}
- else if (cmd_cfunc_eq (c, end_actions_pseudocommand))
- return END;
- else
+
+ else if (cmd_cfunc_eq (c, while_stepping_pseudocommand))
{
- warning (_("'%s' is not a supported tracepoint action."), *line);
- return BADLINE;
- }
-}
+ char *steparg; /* in case warning is necessary */
-/* worker function */
-void
-free_actions (struct tracepoint *t)
-{
- struct action_line *line, *next;
+ while (isspace ((int) *p))
+ p++;
+ steparg = p;
- for (line = t->actions; line; line = next)
- {
- next = line->next;
- if (line->action)
- xfree (line->action);
- xfree (line);
+ if (*p == '\0' || (t->step_count = strtol (p, &p, 0)) == 0)
+ error (_("while-stepping step count `%s' is malformed."), *line);
}
- t->actions = NULL;
-}
-static void
-do_free_actions_cleanup (void *t)
-{
- free_actions (t);
-}
+ else if (cmd_cfunc_eq (c, end_actions_pseudocommand))
+ ;
-static struct cleanup *
-make_cleanup_free_actions (struct tracepoint *t)
-{
- return make_cleanup (do_free_actions_cleanup, t);
+ else
+ error (_("`%s' is not a supported tracepoint action."), *line);
}
enum {
{
if (info_verbose)
printf_filtered ("collect register %d\n", regno);
- if (regno > (8 * sizeof (collection->regs_mask)))
+ if (regno >= (8 * sizeof (collection->regs_mask)))
error (_("Internal: register number %d too large for tracepoint"),
regno);
collection->regs_mask[regno / 8] |= 1 << (regno % 8);
static void
collect_symbol (struct collection_list *collect,
struct symbol *sym,
- long frame_regno, long frame_offset)
+ struct gdbarch *gdbarch,
+ long frame_regno, long frame_offset,
+ CORE_ADDR scope)
{
unsigned long len;
unsigned int reg;
bfd_signed_vma offset;
+ int treat_as_expr = 0;
len = TYPE_LENGTH (check_typedef (SYMBOL_TYPE (sym)));
switch (SYMBOL_CLASS (sym))
{
default:
printf_filtered ("%s: don't know symbol class %d\n",
- DEPRECATED_SYMBOL_NAME (sym),
+ SYMBOL_PRINT_NAME (sym),
SYMBOL_CLASS (sym));
break;
case LOC_CONST:
printf_filtered ("constant %s (value %ld) will not be collected.\n",
- DEPRECATED_SYMBOL_NAME (sym), SYMBOL_VALUE (sym));
+ SYMBOL_PRINT_NAME (sym), SYMBOL_VALUE (sym));
break;
case LOC_STATIC:
offset = SYMBOL_VALUE_ADDRESS (sym);
sprintf_vma (tmp, offset);
printf_filtered ("LOC_STATIC %s: collect %ld bytes at %s.\n",
- DEPRECATED_SYMBOL_NAME (sym), len,
+ SYMBOL_PRINT_NAME (sym), len,
tmp /* address */);
}
- add_memrange (collect, memrange_absolute, offset, len);
+ /* A struct may be a C++ class with static fields, go to general
+ expression handling. */
+ if (TYPE_CODE (SYMBOL_TYPE (sym)) == TYPE_CODE_STRUCT)
+ treat_as_expr = 1;
+ else
+ add_memrange (collect, memrange_absolute, offset, len);
break;
case LOC_REGISTER:
- case LOC_REGPARM:
- reg = SYMBOL_VALUE (sym);
+ reg = SYMBOL_REGISTER_OPS (sym)->register_number (sym, gdbarch);
if (info_verbose)
printf_filtered ("LOC_REG[parm] %s: ",
- DEPRECATED_SYMBOL_NAME (sym));
+ SYMBOL_PRINT_NAME (sym));
add_register (collect, reg);
/* Check for doubles stored in two registers. */
/* FIXME: how about larger types stored in 3 or more regs? */
if (TYPE_CODE (SYMBOL_TYPE (sym)) == TYPE_CODE_FLT &&
- len > register_size (current_gdbarch, reg))
+ len > register_size (gdbarch, reg))
add_register (collect, reg + 1);
break;
case LOC_REF_ARG:
printf_filtered ("Sorry, don't know how to do LOC_REF_ARG yet.\n");
printf_filtered (" (will not collect %s)\n",
- DEPRECATED_SYMBOL_NAME (sym));
+ SYMBOL_PRINT_NAME (sym));
break;
case LOC_ARG:
reg = frame_regno;
if (info_verbose)
{
printf_filtered ("LOC_LOCAL %s: Collect %ld bytes at offset ",
- DEPRECATED_SYMBOL_NAME (sym), len);
+ SYMBOL_PRINT_NAME (sym), len);
printf_vma (offset);
printf_filtered (" from frame ptr reg %d\n", reg);
}
if (info_verbose)
{
printf_filtered ("LOC_REGPARM_ADDR %s: Collect %ld bytes at offset ",
- DEPRECATED_SYMBOL_NAME (sym), len);
+ SYMBOL_PRINT_NAME (sym), len);
printf_vma (offset);
printf_filtered (" from reg %d\n", reg);
}
add_memrange (collect, reg, offset, len);
break;
case LOC_LOCAL:
- case LOC_LOCAL_ARG:
reg = frame_regno;
offset = frame_offset + SYMBOL_VALUE (sym);
if (info_verbose)
{
printf_filtered ("LOC_LOCAL %s: Collect %ld bytes at offset ",
- DEPRECATED_SYMBOL_NAME (sym), len);
+ SYMBOL_PRINT_NAME (sym), len);
printf_vma (offset);
printf_filtered (" from frame ptr reg %d\n", reg);
}
add_memrange (collect, reg, offset, len);
break;
- case LOC_BASEREG:
- case LOC_BASEREG_ARG:
- reg = SYMBOL_BASEREG (sym);
- offset = SYMBOL_VALUE (sym);
- if (info_verbose)
- {
- printf_filtered ("LOC_BASEREG %s: collect %ld bytes at offset ",
- DEPRECATED_SYMBOL_NAME (sym), len);
- printf_vma (offset);
- printf_filtered (" from basereg %d\n", reg);
- }
- add_memrange (collect, reg, offset, len);
- break;
+
case LOC_UNRESOLVED:
- printf_filtered ("Don't know LOC_UNRESOLVED %s\n",
- DEPRECATED_SYMBOL_NAME (sym));
+ treat_as_expr = 1;
break;
+
case LOC_OPTIMIZED_OUT:
printf_filtered ("%s has been optimized out of existence.\n",
- DEPRECATED_SYMBOL_NAME (sym));
+ SYMBOL_PRINT_NAME (sym));
break;
+
+ case LOC_COMPUTED:
+ treat_as_expr = 1;
+ break;
+ }
+
+ /* Expressions are the most general case. */
+ if (treat_as_expr)
+ {
+ struct agent_expr *aexpr;
+ struct cleanup *old_chain1 = NULL;
+ struct agent_reqs areqs;
+
+ aexpr = gen_trace_for_var (scope, gdbarch, sym);
+
+ /* It can happen that the symbol is recorded as a computed
+ location, but it's been optimized away and doesn't actually
+ have a location expression. */
+ if (!aexpr)
+ {
+ printf_filtered ("%s has been optimized out of existence.\n",
+ SYMBOL_PRINT_NAME (sym));
+ return;
+ }
+
+ old_chain1 = make_cleanup_free_agent_expr (aexpr);
+
+ ax_reqs (aexpr, &areqs);
+
+ report_agent_reqs_errors (aexpr, &areqs);
+
+ discard_cleanups (old_chain1);
+ add_aexpr (collect, aexpr);
+
+ /* take care of the registers */
+ if (areqs.reg_mask_len > 0)
+ {
+ int ndx1, ndx2;
+
+ for (ndx1 = 0; ndx1 < areqs.reg_mask_len; ndx1++)
+ {
+ QUIT; /* allow user to bail out with ^C */
+ if (areqs.reg_mask[ndx1] != 0)
+ {
+ /* assume chars have 8 bits */
+ for (ndx2 = 0; ndx2 < 8; ndx2++)
+ if (areqs.reg_mask[ndx1] & (1 << ndx2))
+ /* it's used -- record it */
+ add_register (collect, ndx1 * 8 + ndx2);
+ }
+ }
+ }
}
}
+/* Data to be passed around in the calls to the locals and args
+ iterators. */
+
+struct add_local_symbols_data
+{
+ struct collection_list *collect;
+ struct gdbarch *gdbarch;
+ CORE_ADDR pc;
+ long frame_regno;
+ long frame_offset;
+ int count;
+};
+
+/* The callback for the locals and args iterators */
+
+static void
+do_collect_symbol (const char *print_name,
+ struct symbol *sym,
+ void *cb_data)
+{
+ struct add_local_symbols_data *p = cb_data;
+
+ collect_symbol (p->collect, sym, p->gdbarch, p->frame_regno,
+ p->frame_offset, p->pc);
+ p->count++;
+}
+
/* Add all locals (or args) symbols to collection list */
static void
-add_local_symbols (struct collection_list *collect, CORE_ADDR pc,
+add_local_symbols (struct collection_list *collect,
+ struct gdbarch *gdbarch, CORE_ADDR pc,
long frame_regno, long frame_offset, int type)
{
- struct symbol *sym;
struct block *block;
- struct dict_iterator iter;
- int count = 0;
+ struct add_local_symbols_data cb_data;
- block = block_for_pc (pc);
- while (block != 0)
+ cb_data.collect = collect;
+ cb_data.gdbarch = gdbarch;
+ cb_data.pc = pc;
+ cb_data.frame_regno = frame_regno;
+ cb_data.frame_offset = frame_offset;
+ cb_data.count = 0;
+
+ if (type == 'L')
{
- QUIT; /* allow user to bail out with ^C */
- ALL_BLOCK_SYMBOLS (block, iter, sym)
+ block = block_for_pc (pc);
+ if (block == NULL)
{
- switch (SYMBOL_CLASS (sym))
- {
- default:
- warning (_("don't know how to trace local symbol %s"),
- DEPRECATED_SYMBOL_NAME (sym));
- case LOC_LOCAL:
- case LOC_STATIC:
- case LOC_REGISTER:
- case LOC_BASEREG:
- if (type == 'L') /* collecting Locals */
- {
- count++;
- collect_symbol (collect, sym, frame_regno,
- frame_offset);
- }
- break;
- case LOC_ARG:
- case LOC_LOCAL_ARG:
- case LOC_REF_ARG:
- case LOC_REGPARM:
- case LOC_REGPARM_ADDR:
- case LOC_BASEREG_ARG:
- if (type == 'A') /* collecting Arguments */
- {
- count++;
- collect_symbol (collect, sym, frame_regno,
- frame_offset);
- }
- }
+ warning (_("Can't collect locals; "
+ "no symbol table info available.\n"));
+ return;
}
- if (BLOCK_FUNCTION (block))
- break;
- else
- block = BLOCK_SUPERBLOCK (block);
+
+ iterate_over_block_local_vars (block, do_collect_symbol, &cb_data);
+ if (cb_data.count == 0)
+ warning (_("No locals found in scope."));
+ }
+ else
+ {
+ pc = get_pc_function_start (pc);
+ block = block_for_pc (pc);
+ if (block == NULL)
+ {
+ warning (_("Can't collect args; no symbol table info available.\n"));
+ return;
+ }
+
+ iterate_over_block_arg_vars (block, do_collect_symbol, &cb_data);
+ if (cb_data.count == 0)
+ warning (_("No args found in scope."));
}
- if (count == 0)
- warning (_("No %s found in scope."),
- type == 'L' ? "locals" : "args");
}
/* worker function */
sprintf (end, "%02X", list->regs_mask[i]);
end += 2;
}
- (*str_list)[ndx] = savestring (temp_buf, end - temp_buf);
+ (*str_list)[ndx] = xstrdup (temp_buf);
ndx++;
}
if (info_verbose)
(*str_list)[ndx] = NULL;
if (ndx == 0)
- return NULL;
+ {
+ xfree (str_list);
+ return NULL;
+ }
else
return *str_list;
}
-static void
-free_actions_list_cleanup_wrapper (void *al)
-{
- free_actions_list (al);
-}
-
-static void
-free_actions_list (char **actions_list)
-{
- int ndx;
-
- if (actions_list == 0)
- return;
-
- for (ndx = 0; actions_list[ndx]; ndx++)
- xfree (actions_list[ndx]);
-
- xfree (actions_list);
-}
-/* Render all actions into gdb protocol. */
static void
-encode_actions (struct tracepoint *t, char ***tdp_actions,
- char ***stepping_actions)
+encode_actions_1 (struct command_line *action,
+ struct breakpoint *t,
+ struct bp_location *tloc,
+ int frame_reg,
+ LONGEST frame_offset,
+ struct collection_list *collect,
+ struct collection_list *stepping_list)
{
- static char tdp_buff[2048], step_buff[2048];
char *action_exp;
struct expression *exp = NULL;
- struct action_line *action;
+ struct command_line *actions;
int i;
struct value *tempval;
- struct collection_list *collect;
struct cmd_list_element *cmd;
struct agent_expr *aexpr;
- int frame_reg;
- LONGEST frame_offset;
-
-
- clear_collection_list (&tracepoint_list);
- clear_collection_list (&stepping_list);
- collect = &tracepoint_list;
-
- *tdp_actions = NULL;
- *stepping_actions = NULL;
- TARGET_VIRTUAL_FRAME_POINTER (t->address, &frame_reg, &frame_offset);
-
- for (action = t->actions; action; action = action->next)
+ for (; action; action = action->next)
{
QUIT; /* allow user to bail out with ^C */
- action_exp = action->action;
+ action_exp = action->line;
while (isspace ((int) *action_exp))
action_exp++;
- if (*action_exp == '#') /* comment line */
- return;
-
cmd = lookup_cmd (&action_exp, cmdlist, "", -1, 1);
if (cmd == 0)
error (_("Bad action list item: %s"), action_exp);
if (0 == strncasecmp ("$reg", action_exp, 4))
{
- for (i = 0; i < NUM_REGS; i++)
+ for (i = 0; i < gdbarch_num_regs (t->gdbarch); i++)
add_register (collect, i);
action_exp = strchr (action_exp, ','); /* more? */
}
else if (0 == strncasecmp ("$arg", action_exp, 4))
{
add_local_symbols (collect,
- t->address,
+ t->gdbarch,
+ tloc->address,
frame_reg,
frame_offset,
'A');
else if (0 == strncasecmp ("$loc", action_exp, 4))
{
add_local_symbols (collect,
- t->address,
+ t->gdbarch,
+ tloc->address,
frame_reg,
frame_offset,
'L');
struct agent_reqs areqs;
exp = parse_exp_1 (&action_exp,
- block_for_pc (t->address), 1);
+ block_for_pc (tloc->address), 1);
old_chain = make_cleanup (free_current_contents, &exp);
switch (exp->elts[0].opcode)
{
case OP_REGISTER:
- i = exp->elts[1].longconst;
- if (info_verbose)
- printf_filtered ("OP_REGISTER: ");
- add_register (collect, i);
- break;
+ {
+ const char *name = &exp->elts[2].string;
+
+ i = user_reg_map_name_to_regnum (t->gdbarch,
+ name, strlen (name));
+ if (i == -1)
+ internal_error (__FILE__, __LINE__,
+ _("Register $%s not available"),
+ name);
+ if (info_verbose)
+ printf_filtered ("OP_REGISTER: ");
+ add_register (collect, i);
+ break;
+ }
case UNOP_MEMVAL:
/* safe because we know it's a simple expression */
tempval = evaluate_expression (exp);
- addr = VALUE_ADDRESS (tempval) + value_offset (tempval);
+ addr = value_address (tempval);
len = TYPE_LENGTH (check_typedef (exp->elts[1].type));
add_memrange (collect, memrange_absolute, addr, len);
break;
case OP_VAR_VALUE:
collect_symbol (collect,
exp->elts[2].symbol,
+ t->gdbarch,
frame_reg,
- frame_offset);
+ frame_offset,
+ tloc->address);
break;
default: /* full-fledged expression */
- aexpr = gen_trace_for_expr (t->address, exp);
+ aexpr = gen_trace_for_expr (tloc->address, exp);
old_chain1 = make_cleanup_free_agent_expr (aexpr);
ax_reqs (aexpr, &areqs);
- if (areqs.flaw != agent_flaw_none)
- error (_("malformed expression"));
- if (areqs.min_height < 0)
- error (_("gdb: Internal error: expression has min height < 0"));
- if (areqs.max_height > 20)
- error (_("expression too complicated, try simplifying"));
+ report_agent_reqs_errors (aexpr, &areqs);
discard_cleanups (old_chain1);
add_aexpr (collect, aexpr);
}
while (action_exp && *action_exp++ == ',');
} /* if */
- else if (cmd_cfunc_eq (cmd, while_stepping_pseudocommand))
+ else if (cmd_cfunc_eq (cmd, teval_pseudocommand))
{
- collect = &stepping_list;
- }
- else if (cmd_cfunc_eq (cmd, end_actions_pseudocommand))
+ do
+ { /* repeat over a comma-separated list */
+ QUIT; /* allow user to bail out with ^C */
+ while (isspace ((int) *action_exp))
+ action_exp++;
+
+ {
+ unsigned long addr, len;
+ struct cleanup *old_chain = NULL;
+ struct cleanup *old_chain1 = NULL;
+ struct agent_reqs areqs;
+
+ exp = parse_exp_1 (&action_exp,
+ block_for_pc (tloc->address), 1);
+ old_chain = make_cleanup (free_current_contents, &exp);
+
+ aexpr = gen_eval_for_expr (tloc->address, exp);
+ old_chain1 = make_cleanup_free_agent_expr (aexpr);
+
+ ax_reqs (aexpr, &areqs);
+
+ report_agent_reqs_errors (aexpr, &areqs);
+
+ discard_cleanups (old_chain1);
+ /* Even though we're not officially collecting, add
+ to the collect list anyway. */
+ add_aexpr (collect, aexpr);
+
+ do_cleanups (old_chain);
+ } /* do */
+ }
+ while (action_exp && *action_exp++ == ',');
+ } /* if */
+ else if (cmd_cfunc_eq (cmd, while_stepping_pseudocommand))
{
- if (collect == &stepping_list) /* end stepping actions */
- collect = &tracepoint_list;
- else
- break; /* end tracepoint actions */
+ /* We check against nested while-stepping when setting
+ breakpoint action, so no way to run into nested
+ here. */
+ gdb_assert (stepping_list);
+
+ encode_actions_1 (action->body_list[0], t, tloc, frame_reg, frame_offset,
+ stepping_list, NULL);
}
+ else
+ error (_("Invalid tracepoint command '%s'"), action->line);
} /* for */
+}
+
+/* Render all actions into gdb protocol. */
+/*static*/ void
+encode_actions (struct breakpoint *t, struct bp_location *tloc,
+ char ***tdp_actions, char ***stepping_actions)
+{
+ static char tdp_buff[2048], step_buff[2048];
+ char *default_collect_line = NULL;
+ struct command_line *actions;
+ struct command_line *default_collect_action = NULL;
+ int frame_reg;
+ LONGEST frame_offset;
+ struct cleanup *back_to;
+
+ back_to = make_cleanup (null_cleanup, NULL);
+
+ clear_collection_list (&tracepoint_list);
+ clear_collection_list (&stepping_list);
+
+ *tdp_actions = NULL;
+ *stepping_actions = NULL;
+
+ gdbarch_virtual_frame_pointer (t->gdbarch,
+ t->loc->address, &frame_reg, &frame_offset);
+
+ actions = breakpoint_commands (t);
+
+ /* If there are default expressions to collect, make up a collect
+ action and prepend to the action list to encode. Note that since
+ validation is per-tracepoint (local var "xyz" might be valid for
+ one tracepoint and not another, etc), we make up the action on
+ the fly, and don't cache it. */
+ if (*default_collect)
+ {
+ char *line;
+
+ default_collect_line = xstrprintf ("collect %s", default_collect);
+ make_cleanup (xfree, default_collect_line);
+
+ line = default_collect_line;
+ validate_actionline (&line, t);
+
+ default_collect_action = xmalloc (sizeof (struct command_line));
+ make_cleanup (xfree, default_collect_action);
+ default_collect_action->next = actions;
+ default_collect_action->line = line;
+ actions = default_collect_action;
+ }
+ encode_actions_1 (actions, t, tloc, frame_reg, frame_offset,
+ &tracepoint_list, &stepping_list);
+
memrange_sortmerge (&tracepoint_list);
memrange_sortmerge (&stepping_list);
- *tdp_actions = stringify_collection_list (&tracepoint_list,
+ *tdp_actions = stringify_collection_list (&tracepoint_list,
tdp_buff);
- *stepping_actions = stringify_collection_list (&stepping_list,
+ *stepping_actions = stringify_collection_list (&stepping_list,
step_buff);
+
+ do_cleanups (back_to);
}
static void
collect->next_aexpr_elt++;
}
-static char target_buf[2048];
-
-/* Set "transparent" memory ranges
- Allow trace mechanism to treat text-like sections
- (and perhaps all read-only sections) transparently,
- i.e. don't reject memory requests from these address ranges
- just because they haven't been collected. */
-
-static void
-remote_set_transparent_ranges (void)
+void
+start_tracing (void)
{
- extern bfd *exec_bfd;
- asection *s;
- bfd_size_type size;
- bfd_vma lma;
- int anysecs = 0;
+ char buf[2048];
+ VEC(breakpoint_p) *tp_vec = NULL;
+ int ix;
+ struct breakpoint *t;
+ struct trace_state_variable *tsv;
+ int any_enabled = 0;
+
+ tp_vec = all_tracepoints ();
+
+ /* No point in tracing without any tracepoints... */
+ if (VEC_length (breakpoint_p, tp_vec) == 0)
+ {
+ VEC_free (breakpoint_p, tp_vec);
+ error (_("No tracepoints defined, not starting trace"));
+ }
- if (!exec_bfd)
- return; /* No information to give. */
+ for (ix = 0; VEC_iterate (breakpoint_p, tp_vec, ix, t); ix++)
+ {
+ if (t->enable_state == bp_enabled)
+ {
+ any_enabled = 1;
+ break;
+ }
+ }
- strcpy (target_buf, "QTro");
- for (s = exec_bfd->sections; s; s = s->next)
+ /* No point in tracing with only disabled tracepoints. */
+ if (!any_enabled)
{
- char tmp1[40], tmp2[40];
+ VEC_free (breakpoint_p, tp_vec);
+ error (_("No tracepoints enabled, not starting trace"));
+ }
- if ((s->flags & SEC_LOAD) == 0 ||
- /* (s->flags & SEC_CODE) == 0 || */
- (s->flags & SEC_READONLY) == 0)
- continue;
+ target_trace_init ();
- anysecs = 1;
- lma = s->lma;
- size = bfd_get_section_size (s);
- sprintf_vma (tmp1, lma);
- sprintf_vma (tmp2, lma + size);
- sprintf (target_buf + strlen (target_buf),
- ":%s,%s", tmp1, tmp2);
+ for (ix = 0; VEC_iterate (breakpoint_p, tp_vec, ix, t); ix++)
+ {
+ t->number_on_target = 0;
+ target_download_tracepoint (t);
+ t->number_on_target = t->number;
}
- if (anysecs)
+ VEC_free (breakpoint_p, tp_vec);
+
+ /* Send down all the trace state variables too. */
+ for (ix = 0; VEC_iterate (tsv_s, tvariables, ix, tsv); ++ix)
{
- putpkt (target_buf);
- getpkt (target_buf, sizeof (target_buf), 0);
+ target_download_trace_state_variable (tsv);
}
+
+ /* Tell target to treat text-like sections as transparent. */
+ target_trace_set_readonly_regions ();
+ /* Set some mode flags. */
+ target_set_disconnected_tracing (disconnected_tracing);
+ target_set_circular_trace_buffer (circular_trace_buffer);
+
+ /* Now insert traps and begin collecting data. */
+ target_trace_start ();
+
+ /* Reset our local state. */
+ set_traceframe_num (-1);
+ set_tracepoint_num (-1);
+ set_traceframe_context (NULL);
+ current_trace_status()->running = 1;
}
/* tstart command:
Tell target to clear any previous trace experiment.
Walk the list of tracepoints, and send them (and their actions)
- to the target. If no errors,
+ to the target. If no errors,
Tell target to start a new trace experiment. */
static void
trace_start_command (char *args, int from_tty)
{
- struct tracepoint *t;
- char buf[2048];
- char **tdp_actions;
- char **stepping_actions;
- int ndx;
- struct cleanup *old_chain = NULL;
-
dont_repeat (); /* Like "run", dangerous to repeat accidentally. */
- if (target_is_remote ())
+ if (current_trace_status ()->running)
{
- putpkt ("QTinit");
- remote_get_noisy_reply (target_buf, sizeof (target_buf));
- if (strcmp (target_buf, "OK"))
- error (_("Target does not support this command."));
-
- ALL_TRACEPOINTS (t)
- {
- char tmp[40];
-
- sprintf_vma (tmp, t->address);
- sprintf (buf, "QTDP:%x:%s:%c:%lx:%x", t->number,
- tmp, /* address */
- t->enabled_p ? 'E' : 'D',
- t->step_count, t->pass_count);
-
- if (t->actions)
- strcat (buf, "-");
- putpkt (buf);
- remote_get_noisy_reply (target_buf, sizeof (target_buf));
- if (strcmp (target_buf, "OK"))
- error (_("Target does not support tracepoints."));
-
- if (t->actions)
- {
- encode_actions (t, &tdp_actions, &stepping_actions);
- old_chain = make_cleanup (free_actions_list_cleanup_wrapper,
- tdp_actions);
- (void) make_cleanup (free_actions_list_cleanup_wrapper,
- stepping_actions);
-
- /* do_single_steps (t); */
- if (tdp_actions)
- {
- for (ndx = 0; tdp_actions[ndx]; ndx++)
- {
- QUIT; /* allow user to bail out with ^C */
- sprintf (buf, "QTDP:-%x:%s:%s%c",
- t->number, tmp, /* address */
- tdp_actions[ndx],
- ((tdp_actions[ndx + 1] || stepping_actions)
- ? '-' : 0));
- putpkt (buf);
- remote_get_noisy_reply (target_buf,
- sizeof (target_buf));
- if (strcmp (target_buf, "OK"))
- error (_("Error on target while setting tracepoints."));
- }
- }
- if (stepping_actions)
- {
- for (ndx = 0; stepping_actions[ndx]; ndx++)
- {
- QUIT; /* allow user to bail out with ^C */
- sprintf (buf, "QTDP:-%x:%s:%s%s%s",
- t->number, tmp, /* address */
- ((ndx == 0) ? "S" : ""),
- stepping_actions[ndx],
- (stepping_actions[ndx + 1] ? "-" : ""));
- putpkt (buf);
- remote_get_noisy_reply (target_buf,
- sizeof (target_buf));
- if (strcmp (target_buf, "OK"))
- error (_("Error on target while setting tracepoints."));
- }
- }
-
- do_cleanups (old_chain);
- }
- }
- /* Tell target to treat text-like sections as transparent. */
- remote_set_transparent_ranges ();
- /* Now insert traps and begin collecting data. */
- putpkt ("QTStart");
- remote_get_noisy_reply (target_buf, sizeof (target_buf));
- if (strcmp (target_buf, "OK"))
- error (_("Bogus reply from target: %s"), target_buf);
- set_traceframe_num (-1); /* All old traceframes invalidated. */
- set_tracepoint_num (-1);
- set_traceframe_context (-1);
- trace_running_p = 1;
- if (deprecated_trace_start_stop_hook)
- deprecated_trace_start_stop_hook (1, from_tty);
-
+ if (from_tty
+ && !query (_("A trace is running already. Start a new run? ")))
+ error (_("New trace run not started."));
}
- else
- error (_("Trace can only be run on remote targets."));
+
+ start_tracing ();
}
/* tstop command */
static void
trace_stop_command (char *args, int from_tty)
{
- if (target_is_remote ())
- {
- putpkt ("QTStop");
- remote_get_noisy_reply (target_buf, sizeof (target_buf));
- if (strcmp (target_buf, "OK"))
- error (_("Bogus reply from target: %s"), target_buf);
- trace_running_p = 0;
- if (deprecated_trace_start_stop_hook)
- deprecated_trace_start_stop_hook (0, from_tty);
- }
- else
- error (_("Trace can only be run on remote targets."));
+ if (!current_trace_status ()->running)
+ error (_("Trace is not running."));
+
+ stop_tracing ();
}
-unsigned long trace_running_p;
+void
+stop_tracing (void)
+{
+ target_trace_stop ();
+ /* should change in response to reply? */
+ current_trace_status ()->running = 0;
+}
/* tstatus command */
static void
trace_status_command (char *args, int from_tty)
{
- if (target_is_remote ())
- {
- putpkt ("qTStatus");
- remote_get_noisy_reply (target_buf, sizeof (target_buf));
+ struct trace_status *ts = current_trace_status ();
+ int status;
+
+ status = target_get_trace_status (ts);
- if (target_buf[0] != 'T' ||
- (target_buf[1] != '0' && target_buf[1] != '1'))
- error (_("Bogus reply from target: %s"), target_buf);
+ if (status == -1)
+ {
+ if (ts->from_file)
+ printf_filtered (_("Using a trace file.\n"));
+ else
+ {
+ printf_filtered (_("Trace can not be run on this target.\n"));
+ return;
+ }
+ }
- /* exported for use by the GUI */
- trace_running_p = (target_buf[1] == '1');
+ if (!ts->running_known)
+ {
+ printf_filtered (_("Run/stop status is unknown.\n"));
+ }
+ else if (ts->running)
+ {
+ printf_filtered (_("Trace is running on the target.\n"));
+ if (disconnected_tracing)
+ printf_filtered (_("Trace will continue if GDB disconnects.\n"));
+ else
+ printf_filtered (_("Trace will stop if GDB disconnects.\n"));
}
else
- error (_("Trace can only be run on remote targets."));
-}
-
-/* Worker function for the various flavors of the tfind command. */
-static void
-finish_tfind_command (char *msg,
- long sizeof_msg,
- int from_tty)
-{
- int target_frameno = -1, target_tracept = -1;
- CORE_ADDR old_frame_addr;
- struct symbol *old_func;
- char *reply;
-
- old_frame_addr = get_frame_base (get_current_frame ());
- old_func = find_pc_function (read_pc ());
-
- putpkt (msg);
- reply = remote_get_noisy_reply (msg, sizeof_msg);
+ {
+ switch (ts->stop_reason)
+ {
+ case trace_never_run:
+ printf_filtered (_("No trace has been run on the target.\n"));
+ break;
+ case tstop_command:
+ printf_filtered (_("Trace stopped by a tstop command.\n"));
+ break;
+ case trace_buffer_full:
+ printf_filtered (_("Trace stopped because the buffer was full.\n"));
+ break;
+ case trace_disconnected:
+ printf_filtered (_("Trace stopped because of disconnection.\n"));
+ break;
+ case tracepoint_passcount:
+ printf_filtered (_("Trace stopped by tracepoint %d.\n"),
+ ts->stopping_tracepoint);
+ break;
+ case tracepoint_error:
+ if (ts->stopping_tracepoint)
+ printf_filtered (_("Trace stopped by an error (%s, tracepoint %d).\n"),
+ ts->error_desc, ts->stopping_tracepoint);
+ else
+ printf_filtered (_("Trace stopped by an error (%s).\n"),
+ ts->error_desc);
+ break;
+ case trace_stop_reason_unknown:
+ printf_filtered (_("Trace stopped for an unknown reason.\n"));
+ break;
+ default:
+ printf_filtered (_("Trace stopped for some other reason (%d).\n"),
+ ts->stop_reason);
+ break;
+ }
+ }
- while (reply && *reply)
- switch (*reply)
- {
- case 'F':
- if ((target_frameno = (int) strtol (++reply, &reply, 16)) == -1)
- {
- /* A request for a non-existant trace frame has failed.
- Our response will be different, depending on FROM_TTY:
-
- If FROM_TTY is true, meaning that this command was
- typed interactively by the user, then give an error
- and DO NOT change the state of traceframe_number etc.
-
- However if FROM_TTY is false, meaning that we're either
- in a script, a loop, or a user-defined command, then
- DON'T give an error, but DO change the state of
- traceframe_number etc. to invalid.
-
- The rationalle is that if you typed the command, you
- might just have committed a typo or something, and you'd
- like to NOT lose your current debugging state. However
- if you're in a user-defined command or especially in a
- loop, then you need a way to detect that the command
- failed WITHOUT aborting. This allows you to write
- scripts that search thru the trace buffer until the end,
- and then continue on to do something else. */
-
- if (from_tty)
- error (_("Target failed to find requested trace frame."));
- else
- {
- if (info_verbose)
- printf_filtered ("End of trace buffer.\n");
- /* The following will not recurse, since it's
- special-cased. */
- trace_find_command ("-1", from_tty);
- reply = NULL; /* Break out of loop
- (avoid recursive nonsense). */
- }
- }
- break;
- case 'T':
- if ((target_tracept = (int) strtol (++reply, &reply, 16)) == -1)
- error (_("Target failed to find requested trace frame."));
- break;
- case 'O': /* "OK"? */
- if (reply[1] == 'K' && reply[2] == '\0')
- reply += 2;
- else
- error (_("Bogus reply from target: %s"), reply);
- break;
- default:
- error (_("Bogus reply from target: %s"), reply);
- }
+ if (ts->traceframes_created >= 0
+ && ts->traceframe_count != ts->traceframes_created)
+ {
+ printf_filtered (_("Buffer contains %d trace frames (of %d created total).\n"),
+ ts->traceframe_count, ts->traceframes_created);
+ }
+ else if (ts->traceframe_count >= 0)
+ {
+ printf_filtered (_("Collected %d trace frames.\n"),
+ ts->traceframe_count);
+ }
+
+ if (ts->buffer_free >= 0)
+ {
+ if (ts->buffer_size >= 0)
+ {
+ printf_filtered (_("Trace buffer has %d bytes of %d bytes free"),
+ ts->buffer_free, ts->buffer_size);
+ if (ts->buffer_size > 0)
+ printf_filtered (_(" (%d%% full)"),
+ ((int) ((((long long) (ts->buffer_size
+ - ts->buffer_free)) * 100)
+ / ts->buffer_size)));
+ printf_filtered (_(".\n"));
+ }
+ else
+ printf_filtered (_("Trace buffer has %d bytes free.\n"),
+ ts->buffer_free);
+ }
+
+ /* Now report on what we're doing with tfind. */
+ if (traceframe_number >= 0)
+ printf_filtered (_("Looking at trace frame %d, tracepoint %d.\n"),
+ traceframe_number, tracepoint_number);
+ else
+ printf_filtered (_("Not looking at any trace frame.\n"));
+}
+
+/* Report the trace status to uiout, in a way suitable for MI, and not
+ suitable for CLI. If ON_STOP is true, suppress a few fields that
+ are not meaningful in the -trace-stop response.
+
+ The implementation is essentially parallel to trace_status_command, but
+ merging them will result in unreadable code. */
+void
+trace_status_mi (int on_stop)
+{
+ struct trace_status *ts = current_trace_status ();
+ int status;
+ char *string_status;
+
+ status = target_get_trace_status (ts);
+
+ if (status == -1 && !ts->from_file)
+ {
+ ui_out_field_string (uiout, "supported", "0");
+ return;
+ }
+
+ if (ts->from_file)
+ ui_out_field_string (uiout, "supported", "file");
+ else if (!on_stop)
+ ui_out_field_string (uiout, "supported", "1");
+
+ gdb_assert (ts->running_known);
+
+ if (ts->running)
+ {
+ ui_out_field_string (uiout, "running", "1");
+
+ /* Unlike CLI, do not show the state of 'disconnected-tracing' variable.
+ Given that the frontend gets the status either on -trace-stop, or from
+ -trace-status after re-connection, it does not seem like this
+ information is necessary for anything. It is not necessary for either
+ figuring the vital state of the target nor for navigation of trace
+ frames. If the frontend wants to show the current state is some
+ configure dialog, it can request the value when such dialog is
+ invoked by the user. */
+ }
+ else
+ {
+ char *stop_reason = NULL;
+ int stopping_tracepoint = -1;
+
+ if (!on_stop)
+ ui_out_field_string (uiout, "running", "0");
+
+ if (ts->stop_reason != trace_stop_reason_unknown)
+ {
+ switch (ts->stop_reason)
+ {
+ case tstop_command:
+ stop_reason = "request";
+ break;
+ case trace_buffer_full:
+ stop_reason = "overflow";
+ break;
+ case trace_disconnected:
+ stop_reason = "disconnection";
+ break;
+ case tracepoint_passcount:
+ stop_reason = "passcount";
+ stopping_tracepoint = ts->stopping_tracepoint;
+ break;
+ case tracepoint_error:
+ stop_reason = "error";
+ stopping_tracepoint = ts->stopping_tracepoint;
+ break;
+ }
+
+ if (stop_reason)
+ {
+ ui_out_field_string (uiout, "stop-reason", stop_reason);
+ if (stopping_tracepoint != -1)
+ ui_out_field_int (uiout, "stopping-tracepoint",
+ stopping_tracepoint);
+ if (ts->stop_reason == tracepoint_error)
+ ui_out_field_string (uiout, "error-description",
+ ts->error_desc);
+ }
+ }
+ }
+
+
+ if ((int) ts->traceframe_count != -1)
+ ui_out_field_int (uiout, "frames", ts->traceframe_count);
+ if ((int) ts->buffer_size != -1)
+ ui_out_field_int (uiout, "buffer-size", (int) ts->buffer_size);
+ if ((int) ts->buffer_free != -1)
+ ui_out_field_int (uiout, "buffer-free", (int) ts->buffer_free);
+}
- flush_cached_frames ();
+
+void
+disconnect_or_stop_tracing (int from_tty)
+{
+ /* It can happen that the target that was tracing went away on its
+ own, and we didn't notice. Get a status update, and if the
+ current target doesn't even do tracing, then assume it's not
+ running anymore. */
+ if (target_get_trace_status (current_trace_status ()) < 0)
+ current_trace_status ()->running = 0;
+
+ if (current_trace_status ()->running && from_tty)
+ {
+ int cont = query (_("Trace is running. Continue tracing after detach? "));
+ /* Note that we send the query result without affecting the
+ user's setting of disconnected_tracing, so that the answer is
+ a one-time-only. */
+ send_disconnected_tracing_value (cont);
+
+ /* Also ensure that we do the equivalent of a tstop command if
+ tracing is not to continue after the detach. */
+ if (!cont)
+ stop_tracing ();
+ }
+
+ /* Also we want to be out of tfind mode, otherwise things can get
+ confusing upon reconnection. Just use these calls instead of
+ full tfind_1 behavior because we're in the middle of detaching,
+ and there's no point to updating current stack frame etc. */
+ set_traceframe_number (-1);
+ set_traceframe_context (NULL);
+}
+
+/* Worker function for the various flavors of the tfind command. */
+void
+tfind_1 (enum trace_find_type type, int num,
+ ULONGEST addr1, ULONGEST addr2,
+ int from_tty)
+{
+ int target_frameno = -1, target_tracept = -1;
+ struct frame_id old_frame_id;
+ char *reply;
+ struct breakpoint *tp;
+
+ old_frame_id = get_frame_id (get_current_frame ());
+
+ target_frameno = target_trace_find (type, num, addr1, addr2,
+ &target_tracept);
+
+ if (type == tfind_number
+ && num == -1
+ && target_frameno == -1)
+ {
+ /* We told the target to get out of tfind mode, and it did. */
+ }
+ else if (target_frameno == -1)
+ {
+ /* A request for a non-existant trace frame has failed.
+ Our response will be different, depending on FROM_TTY:
+
+ If FROM_TTY is true, meaning that this command was
+ typed interactively by the user, then give an error
+ and DO NOT change the state of traceframe_number etc.
+
+ However if FROM_TTY is false, meaning that we're either
+ in a script, a loop, or a user-defined command, then
+ DON'T give an error, but DO change the state of
+ traceframe_number etc. to invalid.
+
+ The rationalle is that if you typed the command, you
+ might just have committed a typo or something, and you'd
+ like to NOT lose your current debugging state. However
+ if you're in a user-defined command or especially in a
+ loop, then you need a way to detect that the command
+ failed WITHOUT aborting. This allows you to write
+ scripts that search thru the trace buffer until the end,
+ and then continue on to do something else. */
+
+ if (from_tty)
+ error (_("Target failed to find requested trace frame."));
+ else
+ {
+ if (info_verbose)
+ printf_filtered ("End of trace buffer.\n");
+#if 0 /* dubious now? */
+ /* The following will not recurse, since it's
+ special-cased. */
+ trace_find_command ("-1", from_tty);
+#endif
+ }
+ }
+
+ tp = get_tracepoint_by_number_on_target (target_tracept);
+
+ reinit_frame_cache ();
registers_changed ();
- select_frame (get_current_frame ());
+ target_dcache_invalidate ();
set_traceframe_num (target_frameno);
- set_tracepoint_num (target_tracept);
+ set_tracepoint_num (tp ? tp->number : target_tracept);
if (target_frameno == -1)
- set_traceframe_context (-1);
+ set_traceframe_context (NULL);
else
- set_traceframe_context (read_pc ());
+ set_traceframe_context (get_current_frame ());
- if (from_tty)
+ if (traceframe_number >= 0)
+ {
+ /* Use different branches for MI and CLI to make CLI messages
+ i18n-eable. */
+ if (ui_out_is_mi_like_p (uiout))
+ {
+ ui_out_field_string (uiout, "found", "1");
+ ui_out_field_int (uiout, "tracepoint", tracepoint_number);
+ ui_out_field_int (uiout, "traceframe", traceframe_number);
+ }
+ else
+ {
+ printf_unfiltered (_("Found trace frame %d, tracepoint %d\n"),
+ traceframe_number, tracepoint_number);
+ }
+ }
+ else
+ {
+ if (ui_out_is_mi_like_p (uiout))
+ ui_out_field_string (uiout, "found", "0");
+ else
+ printf_unfiltered (_("No trace frame found"));
+ }
+
+ /* If we're in nonstop mode and getting out of looking at trace
+ frames, there won't be any current frame to go back to and
+ display. */
+ if (from_tty
+ && (has_stack_frames () || traceframe_number >= 0))
{
enum print_what print_what;
whether we have made a transition from one function to
another. If so, we'll print the "stack frame" (ie. the new
function and it's arguments) -- otherwise we'll just show the
- new source line.
-
- This determination is made by checking (1) whether the
- current function has changed, and (2) whether the current FP
- has changed. Hack: if the FP wasn't collected, either at the
- current or the previous frame, assume that the FP has NOT
- changed. */
-
- if (old_func == find_pc_function (read_pc ()) &&
- (old_frame_addr == 0 ||
- get_frame_base (get_current_frame ()) == 0 ||
- old_frame_addr == get_frame_base (get_current_frame ())))
+ new source line. */
+
+ if (frame_id_eq (old_frame_id,
+ get_frame_id (get_current_frame ())))
print_what = SRC_LINE;
else
print_what = SRC_AND_LOC;
{ /* this should only be called with a numeric argument */
int frameno = -1;
- if (target_is_remote ())
+ if (current_trace_status ()->running && !current_trace_status ()->from_file)
+ error ("May not look at trace frames while trace is running.");
+
+ if (args == 0 || *args == 0)
+ { /* TFIND with no args means find NEXT trace frame. */
+ if (traceframe_number == -1)
+ frameno = 0; /* "next" is first one */
+ else
+ frameno = traceframe_number + 1;
+ }
+ else if (0 == strcmp (args, "-"))
{
- if (deprecated_trace_find_hook)
- deprecated_trace_find_hook (args, from_tty);
-
- if (args == 0 || *args == 0)
- { /* TFIND with no args means find NEXT trace frame. */
- if (traceframe_number == -1)
- frameno = 0; /* "next" is first one */
- else
- frameno = traceframe_number + 1;
- }
- else if (0 == strcmp (args, "-"))
- {
- if (traceframe_number == -1)
- error (_("not debugging trace buffer"));
- else if (from_tty && traceframe_number == 0)
- error (_("already at start of trace buffer"));
-
- frameno = traceframe_number - 1;
- }
- else
- frameno = parse_and_eval_long (args);
+ if (traceframe_number == -1)
+ error (_("not debugging trace buffer"));
+ else if (from_tty && traceframe_number == 0)
+ error (_("already at start of trace buffer"));
+
+ frameno = traceframe_number - 1;
+ }
+ /* A hack to work around eval's need for fp to have been collected. */
+ else if (0 == strcmp (args, "-1"))
+ frameno = -1;
+ else
+ frameno = parse_and_eval_long (args);
- if (frameno < -1)
- error (_("invalid input (%d is less than zero)"), frameno);
+ if (frameno < -1)
+ error (_("invalid input (%d is less than zero)"), frameno);
- sprintf (target_buf, "QTFrame:%x", frameno);
- finish_tfind_command (target_buf, sizeof (target_buf), from_tty);
- }
- else
- error (_("Trace can only be run on remote targets."));
+ tfind_1 (tfind_number, frameno, 0, 0, from_tty);
}
/* tfind end */
CORE_ADDR pc;
char tmp[40];
- if (target_is_remote ())
- {
- if (args == 0 || *args == 0)
- pc = read_pc (); /* default is current pc */
- else
- pc = parse_and_eval_address (args);
+ if (current_trace_status ()->running && !current_trace_status ()->from_file)
+ error ("May not look at trace frames while trace is running.");
- sprintf_vma (tmp, pc);
- sprintf (target_buf, "QTFrame:pc:%s", tmp);
- finish_tfind_command (target_buf, sizeof (target_buf), from_tty);
- }
+ if (args == 0 || *args == 0)
+ pc = regcache_read_pc (get_current_regcache ());
else
- error (_("Trace can only be run on remote targets."));
+ pc = parse_and_eval_address (args);
+
+ tfind_1 (tfind_pc, 0, pc, 0, from_tty);
}
/* tfind tracepoint command */
trace_find_tracepoint_command (char *args, int from_tty)
{
int tdp;
+ struct breakpoint *tp;
- if (target_is_remote ())
+ if (current_trace_status ()->running && !current_trace_status ()->from_file)
+ error ("May not look at trace frames while trace is running.");
+
+ if (args == 0 || *args == 0)
{
- if (args == 0 || *args == 0)
- {
- if (tracepoint_number == -1)
- error (_("No current tracepoint -- please supply an argument."));
- else
- tdp = tracepoint_number; /* default is current TDP */
- }
+ if (tracepoint_number == -1)
+ error (_("No current tracepoint -- please supply an argument."));
else
- tdp = parse_and_eval_long (args);
-
- sprintf (target_buf, "QTFrame:tdp:%x", tdp);
- finish_tfind_command (target_buf, sizeof (target_buf), from_tty);
+ tdp = tracepoint_number; /* default is current TDP */
}
else
- error (_("Trace can only be run on remote targets."));
+ tdp = parse_and_eval_long (args);
+
+ /* If we have the tracepoint on hand, use the number that the
+ target knows about (which may be different if we disconnected
+ and reconnected). */
+ tp = get_tracepoint (tdp);
+ if (tp)
+ tdp = tp->number_on_target;
+
+ tfind_1 (tfind_tp, tdp, 0, 0, from_tty);
}
/* TFIND LINE command:
struct cleanup *old_chain;
char startpc_str[40], endpc_str[40];
- if (target_is_remote ())
- {
- if (args == 0 || *args == 0)
- {
- sal = find_pc_line (get_frame_pc (get_current_frame ()), 0);
- sals.nelts = 1;
- sals.sals = (struct symtab_and_line *)
- xmalloc (sizeof (struct symtab_and_line));
- sals.sals[0] = sal;
- }
- else
- {
- sals = decode_line_spec (args, 1);
- sal = sals.sals[0];
- }
+ if (current_trace_status ()->running && !current_trace_status ()->from_file)
+ error ("May not look at trace frames while trace is running.");
- old_chain = make_cleanup (xfree, sals.sals);
- if (sal.symtab == 0)
- {
- printf_filtered ("TFIND: No line number information available");
- if (sal.pc != 0)
- {
- /* This is useful for "info line *0x7f34". If we can't
- tell the user about a source line, at least let them
- have the symbolic address. */
- printf_filtered (" for address ");
- wrap_here (" ");
- print_address (sal.pc, gdb_stdout);
- printf_filtered (";\n -- will attempt to find by PC. \n");
- }
- else
- {
- printf_filtered (".\n");
- return; /* No line, no PC; what can we do? */
- }
- }
- else if (sal.line > 0
- && find_line_pc_range (sal, &start_pc, &end_pc))
- {
- if (start_pc == end_pc)
- {
- printf_filtered ("Line %d of \"%s\"",
- sal.line, sal.symtab->filename);
- wrap_here (" ");
- printf_filtered (" is at address ");
- print_address (start_pc, gdb_stdout);
- wrap_here (" ");
- printf_filtered (" but contains no code.\n");
- sal = find_pc_line (start_pc, 0);
- if (sal.line > 0 &&
- find_line_pc_range (sal, &start_pc, &end_pc) &&
- start_pc != end_pc)
- printf_filtered ("Attempting to find line %d instead.\n",
- sal.line);
- else
- error (_("Cannot find a good line."));
- }
- }
- else
- /* Is there any case in which we get here, and have an address
- which the user would want to see? If we have debugging
- symbols and no line numbers? */
- error (_("Line number %d is out of range for \"%s\"."),
- sal.line, sal.symtab->filename);
-
- sprintf_vma (startpc_str, start_pc);
- sprintf_vma (endpc_str, end_pc - 1);
- /* Find within range of stated line. */
- if (args && *args)
- sprintf (target_buf, "QTFrame:range:%s:%s",
- startpc_str, endpc_str);
- /* Find OUTSIDE OF range of CURRENT line. */
- else
- sprintf (target_buf, "QTFrame:outside:%s:%s",
- startpc_str, endpc_str);
- finish_tfind_command (target_buf, sizeof (target_buf),
- from_tty);
- do_cleanups (old_chain);
+ if (args == 0 || *args == 0)
+ {
+ sal = find_pc_line (get_frame_pc (get_current_frame ()), 0);
+ sals.nelts = 1;
+ sals.sals = (struct symtab_and_line *)
+ xmalloc (sizeof (struct symtab_and_line));
+ sals.sals[0] = sal;
+ }
+ else
+ {
+ sals = decode_line_spec (args, 1);
+ sal = sals.sals[0];
}
+
+ old_chain = make_cleanup (xfree, sals.sals);
+ if (sal.symtab == 0)
+ error (_("No line number information available."));
+
+ if (sal.line > 0 && find_line_pc_range (sal, &start_pc, &end_pc))
+ {
+ if (start_pc == end_pc)
+ {
+ printf_filtered ("Line %d of \"%s\"",
+ sal.line, sal.symtab->filename);
+ wrap_here (" ");
+ printf_filtered (" is at address ");
+ print_address (get_current_arch (), start_pc, gdb_stdout);
+ wrap_here (" ");
+ printf_filtered (" but contains no code.\n");
+ sal = find_pc_line (start_pc, 0);
+ if (sal.line > 0
+ && find_line_pc_range (sal, &start_pc, &end_pc)
+ && start_pc != end_pc)
+ printf_filtered ("Attempting to find line %d instead.\n",
+ sal.line);
+ else
+ error (_("Cannot find a good line."));
+ }
+ }
+ else
+ /* Is there any case in which we get here, and have an address
+ which the user would want to see? If we have debugging
+ symbols and no line numbers? */
+ error (_("Line number %d is out of range for \"%s\"."),
+ sal.line, sal.symtab->filename);
+
+ /* Find within range of stated line. */
+ if (args && *args)
+ tfind_1 (tfind_range, 0, start_pc, end_pc - 1, from_tty);
else
- error (_("Trace can only be run on remote targets."));
+ tfind_1 (tfind_outside, 0, start_pc, end_pc - 1, from_tty);
+ do_cleanups (old_chain);
}
/* tfind range command */
char start_str[40], stop_str[40];
char *tmp;
- if (target_is_remote ())
- {
- if (args == 0 || *args == 0)
- { /* XXX FIXME: what should default behavior be? */
- printf_filtered ("Usage: tfind range <startaddr>,<endaddr>\n");
- return;
- }
+ if (current_trace_status ()->running && !current_trace_status ()->from_file)
+ error ("May not look at trace frames while trace is running.");
- if (0 != (tmp = strchr (args, ',')))
- {
- *tmp++ = '\0'; /* terminate start address */
- while (isspace ((int) *tmp))
- tmp++;
- start = parse_and_eval_address (args);
- stop = parse_and_eval_address (tmp);
- }
- else
- { /* no explicit end address? */
- start = parse_and_eval_address (args);
- stop = start + 1; /* ??? */
- }
+ if (args == 0 || *args == 0)
+ { /* XXX FIXME: what should default behavior be? */
+ printf_filtered ("Usage: tfind range <startaddr>,<endaddr>\n");
+ return;
+ }
- sprintf_vma (start_str, start);
- sprintf_vma (stop_str, stop);
- sprintf (target_buf, "QTFrame:range:%s:%s", start_str, stop_str);
- finish_tfind_command (target_buf, sizeof (target_buf), from_tty);
+ if (0 != (tmp = strchr (args, ',')))
+ {
+ *tmp++ = '\0'; /* terminate start address */
+ while (isspace ((int) *tmp))
+ tmp++;
+ start = parse_and_eval_address (args);
+ stop = parse_and_eval_address (tmp);
}
else
- error (_("Trace can only be run on remote targets."));
+ { /* no explicit end address? */
+ start = parse_and_eval_address (args);
+ stop = start + 1; /* ??? */
+ }
+
+ tfind_1 (tfind_range, 0, start, stop, from_tty);
}
/* tfind outside command */
char start_str[40], stop_str[40];
char *tmp;
- if (target_is_remote ())
- {
- if (args == 0 || *args == 0)
- { /* XXX FIXME: what should default behavior be? */
- printf_filtered ("Usage: tfind outside <startaddr>,<endaddr>\n");
- return;
- }
-
- if (0 != (tmp = strchr (args, ',')))
- {
- *tmp++ = '\0'; /* terminate start address */
- while (isspace ((int) *tmp))
- tmp++;
- start = parse_and_eval_address (args);
- stop = parse_and_eval_address (tmp);
- }
- else
- { /* no explicit end address? */
- start = parse_and_eval_address (args);
- stop = start + 1; /* ??? */
- }
-
- sprintf_vma (start_str, start);
- sprintf_vma (stop_str, stop);
- sprintf (target_buf, "QTFrame:outside:%s:%s", start_str, stop_str);
- finish_tfind_command (target_buf, sizeof (target_buf), from_tty);
- }
- else
- error (_("Trace can only be run on remote targets."));
-}
-
-/* save-tracepoints command */
-static void
-tracepoint_save_command (char *args, int from_tty)
-{
- struct tracepoint *tp;
- struct action_line *line;
- FILE *fp;
- char *i1 = " ", *i2 = " ";
- char *indent, *actionline, *pathname;
- char tmp[40];
+ if (current_trace_status ()->running && !current_trace_status ()->from_file)
+ error ("May not look at trace frames while trace is running.");
if (args == 0 || *args == 0)
- error (_("Argument required (file name in which to save tracepoints"));
-
- if (tracepoint_chain == 0)
- {
- warning (_("save-tracepoints: no tracepoints to save."));
+ { /* XXX FIXME: what should default behavior be? */
+ printf_filtered ("Usage: tfind outside <startaddr>,<endaddr>\n");
return;
}
- pathname = tilde_expand (args);
- if (!(fp = fopen (pathname, "w")))
- error (_("Unable to open file '%s' for saving tracepoints (%s)"),
- args, safe_strerror (errno));
- xfree (pathname);
-
- ALL_TRACEPOINTS (tp)
- {
- if (tp->addr_string)
- fprintf (fp, "trace %s\n", tp->addr_string);
- else
- {
- sprintf_vma (tmp, tp->address);
- fprintf (fp, "trace *0x%s\n", tmp);
- }
-
- if (tp->pass_count)
- fprintf (fp, " passcount %d\n", tp->pass_count);
+ if (0 != (tmp = strchr (args, ',')))
+ {
+ *tmp++ = '\0'; /* terminate start address */
+ while (isspace ((int) *tmp))
+ tmp++;
+ start = parse_and_eval_address (args);
+ stop = parse_and_eval_address (tmp);
+ }
+ else
+ { /* no explicit end address? */
+ start = parse_and_eval_address (args);
+ stop = start + 1; /* ??? */
+ }
- if (tp->actions)
- {
- fprintf (fp, " actions\n");
- indent = i1;
- for (line = tp->actions; line; line = line->next)
- {
- struct cmd_list_element *cmd;
-
- QUIT; /* allow user to bail out with ^C */
- actionline = line->action;
- while (isspace ((int) *actionline))
- actionline++;
-
- fprintf (fp, "%s%s\n", indent, actionline);
- if (*actionline != '#') /* skip for comment lines */
- {
- cmd = lookup_cmd (&actionline, cmdlist, "", -1, 1);
- if (cmd == 0)
- error (_("Bad action list item: %s"), actionline);
- if (cmd_cfunc_eq (cmd, while_stepping_pseudocommand))
- indent = i2;
- else if (cmd_cfunc_eq (cmd, end_actions_pseudocommand))
- indent = i1;
- }
- }
- }
- }
- fclose (fp);
- if (from_tty)
- printf_filtered ("Tracepoints saved to file '%s'.\n", args);
- return;
+ tfind_1 (tfind_outside, 0, start, stop, from_tty);
}
/* info scope command: list the locals for a scope. */
char **canonical, *symname, *save_args = args;
struct dict_iterator iter;
int j, count = 0;
+ struct gdbarch *gdbarch;
+ int regno;
if (args == 0 || *args == 0)
error (_("requires an argument (function, line or *addr) to define a scope"));
printf_filtered ("Scope for %s:\n", save_args);
count++;
- symname = DEPRECATED_SYMBOL_NAME (sym);
+ symname = SYMBOL_PRINT_NAME (sym);
if (symname == NULL || *symname == '\0')
continue; /* probably botched, certainly useless */
+ gdbarch = get_objfile_arch (SYMBOL_SYMTAB (sym)->objfile);
+
printf_filtered ("Symbol %s is ", symname);
switch (SYMBOL_CLASS (sym))
{
break;
case LOC_STATIC:
printf_filtered ("in static storage at address ");
- deprecated_print_address_numeric (SYMBOL_VALUE_ADDRESS (sym),
- 1, gdb_stdout);
+ printf_filtered ("%s", paddress (gdbarch,
+ SYMBOL_VALUE_ADDRESS (sym)));
break;
case LOC_REGISTER:
- printf_filtered ("a local variable in register $%s",
- REGISTER_NAME (SYMBOL_VALUE (sym)));
+ /* GDBARCH is the architecture associated with the objfile
+ the symbol is defined in; the target architecture may be
+ different, and may provide additional registers. However,
+ we do not know the target architecture at this point.
+ We assume the objfile architecture will contain all the
+ standard registers that occur in debug info in that
+ objfile. */
+ regno = SYMBOL_REGISTER_OPS (sym)->register_number (sym, gdbarch);
+
+ if (SYMBOL_IS_ARGUMENT (sym))
+ printf_filtered ("an argument in register $%s",
+ gdbarch_register_name (gdbarch, regno));
+ else
+ printf_filtered ("a local variable in register $%s",
+ gdbarch_register_name (gdbarch, regno));
break;
case LOC_ARG:
- case LOC_LOCAL_ARG:
printf_filtered ("an argument at stack/frame offset %ld",
SYMBOL_VALUE (sym));
break;
printf_filtered ("a reference argument at offset %ld",
SYMBOL_VALUE (sym));
break;
- case LOC_REGPARM:
- printf_filtered ("an argument in register $%s",
- REGISTER_NAME (SYMBOL_VALUE (sym)));
- break;
case LOC_REGPARM_ADDR:
+ /* Note comment at LOC_REGISTER. */
+ regno = SYMBOL_REGISTER_OPS (sym)->register_number (sym, gdbarch);
printf_filtered ("the address of an argument, in register $%s",
- REGISTER_NAME (SYMBOL_VALUE (sym)));
+ gdbarch_register_name (gdbarch, regno));
break;
case LOC_TYPEDEF:
printf_filtered ("a typedef.\n");
continue;
case LOC_LABEL:
printf_filtered ("a label at address ");
- deprecated_print_address_numeric (SYMBOL_VALUE_ADDRESS (sym),
- 1, gdb_stdout);
+ printf_filtered ("%s", paddress (gdbarch,
+ SYMBOL_VALUE_ADDRESS (sym)));
break;
case LOC_BLOCK:
printf_filtered ("a function at address ");
- deprecated_print_address_numeric (BLOCK_START (SYMBOL_BLOCK_VALUE (sym)),
- 1, gdb_stdout);
- break;
- case LOC_BASEREG:
- printf_filtered ("a variable at offset %ld from register $%s",
- SYMBOL_VALUE (sym),
- REGISTER_NAME (SYMBOL_BASEREG (sym)));
- break;
- case LOC_BASEREG_ARG:
- printf_filtered ("an argument at offset %ld from register $%s",
- SYMBOL_VALUE (sym),
- REGISTER_NAME (SYMBOL_BASEREG (sym)));
+ printf_filtered ("%s",
+ paddress (gdbarch, BLOCK_START (SYMBOL_BLOCK_VALUE (sym))));
break;
case LOC_UNRESOLVED:
- msym = lookup_minimal_symbol (DEPRECATED_SYMBOL_NAME (sym),
+ msym = lookup_minimal_symbol (SYMBOL_LINKAGE_NAME (sym),
NULL, NULL);
if (msym == NULL)
printf_filtered ("Unresolved Static");
else
{
printf_filtered ("static storage at address ");
- deprecated_print_address_numeric (SYMBOL_VALUE_ADDRESS (msym), 1,
- gdb_stdout);
+ printf_filtered ("%s",
+ paddress (gdbarch, SYMBOL_VALUE_ADDRESS (msym)));
}
break;
case LOC_OPTIMIZED_OUT:
printf_filtered ("optimized out.\n");
continue;
- case LOC_HP_THREAD_LOCAL_STATIC:
- printf_filtered ("HP thread local static ");
- break;
- case LOC_INDIRECT:
- printf_filtered ("extern (local indirect) at address ");
- deprecated_print_address_numeric (SYMBOL_VALUE_ADDRESS (sym),
- 1, gdb_stdout);
- break;
case LOC_COMPUTED:
- case LOC_COMPUTED_ARG:
- SYMBOL_OPS (sym)->describe_location (sym, gdb_stdout);
+ SYMBOL_COMPUTED_OPS (sym)->describe_location (sym, gdb_stdout);
break;
}
if (SYMBOL_TYPE (sym))
*comma = ',';
}
-/* tdump command */
+
+/* Helper for trace_dump_command. Dump the action list starting at
+ ACTION. STEPPING_ACTIONS is true if we're iterating over the
+ actions of the body of a while-stepping action. STEPPING_FRAME is
+ set if the current traceframe was determined to be a while-stepping
+ traceframe. */
+
static void
-trace_dump_command (char *args, int from_tty)
+trace_dump_actions (struct command_line *action,
+ int stepping_actions, int stepping_frame,
+ int from_tty)
{
- struct tracepoint *t;
- struct action_line *action;
char *action_exp, *next_comma;
- struct cleanup *old_cleanups;
- int stepping_actions = 0;
- int stepping_frame = 0;
-
- if (!target_is_remote ())
- {
- error (_("Trace can only be run on remote targets."));
- return;
- }
-
- if (tracepoint_number == -1)
- {
- warning (_("No current trace frame."));
- return;
- }
-
- ALL_TRACEPOINTS (t)
- if (t->number == tracepoint_number)
- break;
-
- if (t == NULL)
- error (_("No known tracepoint matches 'current' tracepoint #%d."),
- tracepoint_number);
-
- old_cleanups = make_cleanup (null_cleanup, NULL);
-
- printf_filtered ("Data collected at tracepoint %d, trace frame %d:\n",
- tracepoint_number, traceframe_number);
-
- /* The current frame is a trap frame if the frame PC is equal
- to the tracepoint PC. If not, then the current frame was
- collected during single-stepping. */
- stepping_frame = (t->address != (read_pc () - DECR_PC_AFTER_BREAK));
-
- for (action = t->actions; action; action = action->next)
+ for (; action != NULL; action = action->next)
{
struct cmd_list_element *cmd;
QUIT; /* allow user to bail out with ^C */
- action_exp = action->action;
+ action_exp = action->line;
while (isspace ((int) *action_exp))
action_exp++;
error (_("Bad action list item: %s"), action_exp);
if (cmd_cfunc_eq (cmd, while_stepping_pseudocommand))
- stepping_actions = 1;
- else if (cmd_cfunc_eq (cmd, end_actions_pseudocommand))
- stepping_actions = 0;
+ {
+ int i;
+
+ for (i = 0; i < action->body_count; ++i)
+ trace_dump_actions (action->body_list[i],
+ 1, stepping_frame, from_tty);
+ }
else if (cmd_cfunc_eq (cmd, collect_pseudocommand))
{
/* Display the collected data.
}
}
}
- discard_cleanups (old_cleanups);
}
-/* Convert the memory pointed to by mem into hex, placing result in buf.
- * Return a pointer to the last char put in buf (null)
- * "stolen" from sparc-stub.c
- */
-
-static const char hexchars[] = "0123456789abcdef";
+/* The tdump command. */
+
+static void
+trace_dump_command (char *args, int from_tty)
+{
+ struct regcache *regcache;
+ struct breakpoint *t;
+ int stepping_frame = 0;
+ struct bp_location *loc;
+
+ if (tracepoint_number == -1)
+ {
+ warning (_("No current trace frame."));
+ return;
+ }
+
+ t = get_tracepoint (tracepoint_number);
+
+ if (t == NULL)
+ error (_("No known tracepoint matches 'current' tracepoint #%d."),
+ tracepoint_number);
+
+ printf_filtered ("Data collected at tracepoint %d, trace frame %d:\n",
+ tracepoint_number, traceframe_number);
+
+ /* The current frame is a trap frame if the frame PC is equal
+ to the tracepoint PC. If not, then the current frame was
+ collected during single-stepping. */
+
+ regcache = get_current_regcache ();
+
+ /* If the traceframe's address matches any of the tracepoint's
+ locations, assume it is a direct hit rather than a while-stepping
+ frame. (FIXME this is not reliable, should record each frame's
+ type.) */
+ stepping_frame = 1;
+ for (loc = t->loc; loc; loc = loc->next)
+ if (loc->address == regcache_read_pc (regcache))
+ stepping_frame = 0;
+
+ trace_dump_actions (breakpoint_commands (t), 0, stepping_frame, from_tty);
+}
+
+/* Encode a piece of a tracepoint's source-level definition in a form
+ that is suitable for both protocol and saving in files. */
+/* This version does not do multiple encodes for long strings; it should
+ return an offset to the next piece to encode. FIXME */
+
+extern int
+encode_source_string (int tpnum, ULONGEST addr,
+ char *srctype, char *src, char *buf, int buf_size)
+{
+ if (80 + strlen (srctype) > buf_size)
+ error (_("Buffer too small for source encoding"));
+ sprintf (buf, "%x:%s:%s:%x:%x:",
+ tpnum, phex_nz (addr, sizeof (addr)), srctype, 0, (int) strlen (src));
+ if (strlen (buf) + strlen (src) * 2 >= buf_size)
+ error (_("Source string too long for buffer"));
+ bin2hex (src, buf + strlen (buf), 0);
+ return -1;
+}
+
+extern int trace_regblock_size;
+
+/* Save tracepoint data to file named FILENAME. If TARGET_DOES_SAVE is
+ non-zero, the save is performed on the target, otherwise GDB obtains all
+ trace data and saves it locally. */
+
+void
+trace_save (const char *filename, int target_does_save)
+{
+ struct cleanup *cleanup;
+ char *pathname;
+ struct trace_status *ts = current_trace_status ();
+ int err, status;
+ FILE *fp;
+ struct uploaded_tp *uploaded_tps = NULL, *utp;
+ struct uploaded_tsv *uploaded_tsvs = NULL, *utsv;
+ int a;
+ char *act;
+ LONGEST gotten = 0;
+ ULONGEST offset = 0;
+#define MAX_TRACE_UPLOAD 2000
+ gdb_byte buf[MAX_TRACE_UPLOAD];
+ int written;
+
+ /* If the target is to save the data to a file on its own, then just
+ send the command and be done with it. */
+ if (target_does_save)
+ {
+ err = target_save_trace_data (filename);
+ if (err < 0)
+ error (_("Target failed to save trace data to '%s'."),
+ filename);
+ return;
+ }
+
+ /* Get the trace status first before opening the file, so if the
+ target is losing, we can get out without touching files. */
+ status = target_get_trace_status (ts);
+
+ pathname = tilde_expand (filename);
+ cleanup = make_cleanup (xfree, pathname);
+
+ fp = fopen (pathname, "w");
+ if (!fp)
+ error (_("Unable to open file '%s' for saving trace data (%s)"),
+ filename, safe_strerror (errno));
+ make_cleanup_fclose (fp);
+
+ /* Write a file header, with a high-bit-set char to indicate a
+ binary file, plus a hint as what this file is, and a version
+ number in case of future needs. */
+ written = fwrite ("\x7fTRACE0\n", 8, 1, fp);
+ if (written < 1)
+ perror_with_name (pathname);
+
+ /* Write descriptive info. */
+
+ /* Write out the size of a register block. */
+ fprintf (fp, "R %x\n", trace_regblock_size);
+
+ /* Write out status of the tracing run (aka "tstatus" info). */
+ fprintf (fp, "status %c;%s",
+ (ts->running ? '1' : '0'), stop_reason_names[ts->stop_reason]);
+ if (ts->stop_reason == tracepoint_error)
+ {
+ char *buf = (char *) alloca (strlen (ts->error_desc) * 2 + 1);
+ bin2hex ((gdb_byte *) ts->error_desc, buf, 0);
+ fprintf (fp, ":%s", buf);
+ }
+ fprintf (fp, ":%x", ts->stopping_tracepoint);
+ if (ts->traceframe_count >= 0)
+ fprintf (fp, ";tframes:%x", ts->traceframe_count);
+ if (ts->traceframes_created >= 0)
+ fprintf (fp, ";tcreated:%x", ts->traceframes_created);
+ if (ts->buffer_free >= 0)
+ fprintf (fp, ";tfree:%x", ts->buffer_free);
+ if (ts->buffer_size >= 0)
+ fprintf (fp, ";tsize:%x", ts->buffer_size);
+ fprintf (fp, "\n");
+
+ /* Note that we want to upload tracepoints and save those, rather
+ than simply writing out the local ones, because the user may have
+ changed tracepoints in GDB in preparation for a future tracing
+ run, or maybe just mass-deleted all types of breakpoints as part
+ of cleaning up. So as not to contaminate the session, leave the
+ data in its uploaded form, don't make into real tracepoints. */
+
+ /* Get trace state variables first, they may be checked when parsing
+ uploaded commands. */
+
+ target_upload_trace_state_variables (&uploaded_tsvs);
+
+ for (utsv = uploaded_tsvs; utsv; utsv = utsv->next)
+ {
+ char *buf = "";
+
+ if (utsv->name)
+ {
+ buf = (char *) xmalloc (strlen (utsv->name) * 2 + 1);
+ bin2hex ((gdb_byte *) (utsv->name), buf, 0);
+ }
+
+ fprintf (fp, "tsv %x:%s:%x:%s\n",
+ utsv->number, phex_nz (utsv->initial_value, 8),
+ utsv->builtin, buf);
+
+ if (utsv->name)
+ xfree (buf);
+ }
+
+ free_uploaded_tsvs (&uploaded_tsvs);
+
+ target_upload_tracepoints (&uploaded_tps);
+
+ for (utp = uploaded_tps; utp; utp = utp->next)
+ {
+ fprintf (fp, "tp T%x:%s:%c:%x:%x",
+ utp->number, phex_nz (utp->addr, sizeof (utp->addr)),
+ (utp->enabled ? 'E' : 'D'), utp->step, utp->pass);
+ if (utp->type == bp_fast_tracepoint)
+ fprintf (fp, ":F%x", utp->orig_size);
+ if (utp->cond)
+ fprintf (fp, ":X%x,%s", (unsigned int) strlen (utp->cond) / 2,
+ utp->cond);
+ fprintf (fp, "\n");
+ for (a = 0; VEC_iterate (char_ptr, utp->actions, a, act); ++a)
+ fprintf (fp, "tp A%x:%s:%s\n",
+ utp->number, phex_nz (utp->addr, sizeof (utp->addr)), act);
+ for (a = 0; VEC_iterate (char_ptr, utp->actions, a, act); ++a)
+ fprintf (fp, "tp S%x:%s:%s\n",
+ utp->number, phex_nz (utp->addr, sizeof (utp->addr)), act);
+ if (utp->at_string)
+ {
+ encode_source_string (utp->number, utp->addr,
+ "at", utp->at_string, buf, MAX_TRACE_UPLOAD);
+ fprintf (fp, "tp Z%s\n", buf);
+ }
+ if (utp->cond_string)
+ {
+ encode_source_string (utp->number, utp->addr,
+ "cond", utp->cond_string, buf, MAX_TRACE_UPLOAD);
+ fprintf (fp, "tp Z%s\n", buf);
+ }
+ for (a = 0; VEC_iterate (char_ptr, utp->cmd_strings, a, act); ++a)
+ {
+ encode_source_string (utp->number, utp->addr, "cmd", act,
+ buf, MAX_TRACE_UPLOAD);
+ fprintf (fp, "tp Z%s\n", buf);
+ }
+ }
+
+ free_uploaded_tps (&uploaded_tps);
+
+ /* Mark the end of the definition section. */
+ fprintf (fp, "\n");
+
+ /* Get and write the trace data proper. We ask for big blocks, in
+ the hopes of efficiency, but will take less if the target has
+ packet size limitations or some such. */
+ while (1)
+ {
+ gotten = target_get_raw_trace_data (buf, offset, MAX_TRACE_UPLOAD);
+ if (gotten < 0)
+ error (_("Failure to get requested trace buffer data"));
+ /* No more data is forthcoming, we're done. */
+ if (gotten == 0)
+ break;
+ written = fwrite (buf, gotten, 1, fp);
+ if (written < 1)
+ perror_with_name (pathname);
+ offset += gotten;
+ }
+
+ /* Mark the end of trace data. (We know that gotten is 0 at this point.) */
+ written = fwrite (&gotten, 4, 1, fp);
+ if (written < 1)
+ perror_with_name (pathname);
+
+ do_cleanups (cleanup);
+}
+
+static void
+trace_save_command (char *args, int from_tty)
+{
+ int target_does_save = 0;
+ char **argv;
+ char *filename = NULL;
+ struct cleanup *back_to;
+
+ if (args == NULL)
+ error_no_arg (_("file in which to save trace data"));
+
+ argv = gdb_buildargv (args);
+ back_to = make_cleanup_freeargv (argv);
+
+ for (; *argv; ++argv)
+ {
+ if (strcmp (*argv, "-r") == 0)
+ target_does_save = 1;
+ else if (**argv == '-')
+ error (_("unknown option `%s'"), *argv);
+ else
+ filename = *argv;
+ }
+
+ if (!filename)
+ error_no_arg (_("file in which to save trace data"));
+
+ trace_save (filename, target_does_save);
+
+ if (from_tty)
+ printf_filtered (_("Trace data saved to file '%s'.\n"), args);
+
+ do_cleanups (back_to);
+}
+
+/* Tell the target what to do with an ongoing tracing run if GDB
+ disconnects for some reason. */
+
+void
+send_disconnected_tracing_value (int value)
+{
+ target_set_disconnected_tracing (value);
+}
+
+static void
+set_disconnected_tracing (char *args, int from_tty,
+ struct cmd_list_element *c)
+{
+ send_disconnected_tracing_value (disconnected_tracing);
+}
+
+static void
+set_circular_trace_buffer (char *args, int from_tty,
+ struct cmd_list_element *c)
+{
+ target_set_circular_trace_buffer (circular_trace_buffer);
+}
+
+/* Convert the memory pointed to by mem into hex, placing result in buf.
+ * Return a pointer to the last char put in buf (null)
+ * "stolen" from sparc-stub.c
+ */
+
+static const char hexchars[] = "0123456789abcdef";
static char *
mem2hex (gdb_byte *mem, char *buf, int count)
return traceframe_number;
}
+/* Make the traceframe NUM be the current trace frame. Does nothing
+ if NUM is already current. */
+
+void
+set_traceframe_number (int num)
+{
+ int newnum;
+
+ if (traceframe_number == num)
+ {
+ /* Nothing to do. */
+ return;
+ }
+
+ newnum = target_trace_find (tfind_number, num, 0, 0, NULL);
+
+ if (newnum != num)
+ warning (_("could not change traceframe"));
+
+ traceframe_number = newnum;
+
+ /* Changing the traceframe changes our view of registers and of the
+ frame chain. */
+ registers_changed ();
+}
+
+/* A cleanup used when switching away and back from tfind mode. */
+
+struct current_traceframe_cleanup
+{
+ /* The traceframe we were inspecting. */
+ int traceframe_number;
+};
+
+static void
+do_restore_current_traceframe_cleanup (void *arg)
+{
+ struct current_traceframe_cleanup *old = arg;
+
+ set_traceframe_number (old->traceframe_number);
+}
+
+static void
+restore_current_traceframe_cleanup_dtor (void *arg)
+{
+ struct current_traceframe_cleanup *old = arg;
+
+ xfree (old);
+}
+
+struct cleanup *
+make_cleanup_restore_current_traceframe (void)
+{
+ struct current_traceframe_cleanup *old;
+
+ old = xmalloc (sizeof (struct current_traceframe_cleanup));
+ old->traceframe_number = traceframe_number;
+
+ return make_cleanup_dtor (do_restore_current_traceframe_cleanup, old,
+ restore_current_traceframe_cleanup_dtor);
+}
+
+/* Given a number and address, return an uploaded tracepoint with that
+ number, creating if necessary. */
+
+struct uploaded_tp *
+get_uploaded_tp (int num, ULONGEST addr, struct uploaded_tp **utpp)
+{
+ struct uploaded_tp *utp;
+
+ for (utp = *utpp; utp; utp = utp->next)
+ if (utp->number == num && utp->addr == addr)
+ return utp;
+ utp = (struct uploaded_tp *) xmalloc (sizeof (struct uploaded_tp));
+ memset (utp, 0, sizeof (struct uploaded_tp));
+ utp->number = num;
+ utp->addr = addr;
+ utp->actions = NULL;
+ utp->step_actions = NULL;
+ utp->cmd_strings = NULL;
+ utp->next = *utpp;
+ *utpp = utp;
+ return utp;
+}
+
+static void
+free_uploaded_tps (struct uploaded_tp **utpp)
+{
+ struct uploaded_tp *next_one;
+
+ while (*utpp)
+ {
+ next_one = (*utpp)->next;
+ xfree (*utpp);
+ *utpp = next_one;
+ }
+}
+
+/* Given a number and address, return an uploaded tracepoint with that
+ number, creating if necessary. */
+
+struct uploaded_tsv *
+get_uploaded_tsv (int num, struct uploaded_tsv **utsvp)
+{
+ struct uploaded_tsv *utsv;
+
+ for (utsv = *utsvp; utsv; utsv = utsv->next)
+ if (utsv->number == num)
+ return utsv;
+ utsv = (struct uploaded_tsv *) xmalloc (sizeof (struct uploaded_tsv));
+ memset (utsv, 0, sizeof (struct uploaded_tsv));
+ utsv->number = num;
+ utsv->next = *utsvp;
+ *utsvp = utsv;
+ return utsv;
+}
+
+static void
+free_uploaded_tsvs (struct uploaded_tsv **utsvp)
+{
+ struct uploaded_tsv *next_one;
+
+ while (*utsvp)
+ {
+ next_one = (*utsvp)->next;
+ xfree (*utsvp);
+ *utsvp = next_one;
+ }
+}
+
+/* Look for an existing tracepoint that seems similar enough to the
+ uploaded one. Enablement isn't compared, because the user can
+ toggle that freely, and may have done so in anticipation of the
+ next trace run. */
+
+struct breakpoint *
+find_matching_tracepoint (struct uploaded_tp *utp)
+{
+ VEC(breakpoint_p) *tp_vec = all_tracepoints ();
+ int ix;
+ struct breakpoint *t;
+ struct bp_location *loc;
+
+ for (ix = 0; VEC_iterate (breakpoint_p, tp_vec, ix, t); ix++)
+ {
+ if (t->type == utp->type
+ && t->step_count == utp->step
+ && t->pass_count == utp->pass
+ /* FIXME also test conditionals and actions */
+ )
+ {
+ /* Scan the locations for an address match. */
+ for (loc = t->loc; loc; loc = loc->next)
+ {
+ if (loc->address == utp->addr)
+ return t;
+ }
+ }
+ }
+ return NULL;
+}
+
+/* Given a list of tracepoints uploaded from a target, attempt to
+ match them up with existing tracepoints, and create new ones if not
+ found. */
+
+void
+merge_uploaded_tracepoints (struct uploaded_tp **uploaded_tps)
+{
+ struct uploaded_tp *utp;
+ struct breakpoint *t;
+
+ /* Look for GDB tracepoints that match up with our uploaded versions. */
+ for (utp = *uploaded_tps; utp; utp = utp->next)
+ {
+ t = find_matching_tracepoint (utp);
+ if (t)
+ printf_filtered (_("Assuming tracepoint %d is same as target's tracepoint %d at %s.\n"),
+ t->number, utp->number, paddress (get_current_arch (), utp->addr));
+ else
+ {
+ t = create_tracepoint_from_upload (utp);
+ if (t)
+ printf_filtered (_("Created tracepoint %d for target's tracepoint %d at %s.\n"),
+ t->number, utp->number, paddress (get_current_arch (), utp->addr));
+ else
+ printf_filtered (_("Failed to create tracepoint for target's tracepoint %d at %s, skipping it.\n"),
+ utp->number, paddress (get_current_arch (), utp->addr));
+ }
+ /* Whether found or created, record the number used by the
+ target, to help with mapping target tracepoints back to their
+ counterparts here. */
+ if (t)
+ t->number_on_target = utp->number;
+ }
+
+ free_uploaded_tps (uploaded_tps);
+}
+
+/* Trace state variables don't have much to identify them beyond their
+ name, so just use that to detect matches. */
+
+struct trace_state_variable *
+find_matching_tsv (struct uploaded_tsv *utsv)
+{
+ if (!utsv->name)
+ return NULL;
+
+ return find_trace_state_variable (utsv->name);
+}
+
+struct trace_state_variable *
+create_tsv_from_upload (struct uploaded_tsv *utsv)
+{
+ const char *namebase;
+ char buf[20];
+ int try_num = 0;
+ struct trace_state_variable *tsv;
+
+ if (utsv->name)
+ {
+ namebase = utsv->name;
+ sprintf (buf, "%s", namebase);
+ }
+ else
+ {
+ namebase = "__tsv";
+ sprintf (buf, "%s_%d", namebase, try_num++);
+ }
+
+ /* Fish for a name that is not in use. */
+ /* (should check against all internal vars?) */
+ while (find_trace_state_variable (buf))
+ sprintf (buf, "%s_%d", namebase, try_num++);
+
+ /* We have an available name, create the variable. */
+ tsv = create_trace_state_variable (xstrdup (buf));
+ tsv->initial_value = utsv->initial_value;
+ tsv->builtin = utsv->builtin;
+
+ return tsv;
+}
+
+/* Given a list of uploaded trace state variables, try to match them
+ up with existing variables, or create additional ones. */
+
+void
+merge_uploaded_trace_state_variables (struct uploaded_tsv **uploaded_tsvs)
+{
+ int ix;
+ struct uploaded_tsv *utsv;
+ struct trace_state_variable *tsv;
+ int highest;
+
+ /* Most likely some numbers will have to be reassigned as part of
+ the merge, so clear them all in anticipation. */
+ for (ix = 0; VEC_iterate (tsv_s, tvariables, ix, tsv); ++ix)
+ tsv->number = 0;
+
+ for (utsv = *uploaded_tsvs; utsv; utsv = utsv->next)
+ {
+ tsv = find_matching_tsv (utsv);
+ if (tsv)
+ printf_filtered (_("Assuming trace state variable $%s is same as target's variable %d.\n"),
+ tsv->name, utsv->number);
+ else
+ {
+ tsv = create_tsv_from_upload (utsv);
+ printf_filtered (_("Created trace state variable $%s for target's variable %d.\n"),
+ tsv->name, utsv->number);
+ }
+ /* Give precedence to numberings that come from the target. */
+ if (tsv)
+ tsv->number = utsv->number;
+ }
+
+ /* Renumber everything that didn't get a target-assigned number. */
+ highest = 0;
+ for (ix = 0; VEC_iterate (tsv_s, tvariables, ix, tsv); ++ix)
+ if (tsv->number > highest)
+ highest = tsv->number;
+
+ ++highest;
+ for (ix = 0; VEC_iterate (tsv_s, tvariables, ix, tsv); ++ix)
+ if (tsv->number == 0)
+ tsv->number = highest++;
+
+ free_uploaded_tsvs (uploaded_tsvs);
+}
+
+/* target tfile command */
+
+struct target_ops tfile_ops;
+
+/* Fill in tfile_ops with its defined operations and properties. */
+
+#define TRACE_HEADER_SIZE 8
+
+char *trace_filename;
+int trace_fd = -1;
+off_t trace_frames_offset;
+off_t cur_offset;
+int cur_data_size;
+int trace_regblock_size;
+
+static void tfile_interp_line (char *line,
+ struct uploaded_tp **utpp,
+ struct uploaded_tsv **utsvp);
+
+static void
+tfile_open (char *filename, int from_tty)
+{
+ char *temp;
+ struct cleanup *old_chain;
+ int flags;
+ int scratch_chan;
+ char header[TRACE_HEADER_SIZE];
+ char linebuf[1000]; /* should be max remote packet size or so */
+ char byte;
+ int bytes, i, gotten;
+ struct trace_status *ts;
+ struct uploaded_tp *uploaded_tps = NULL;
+ struct uploaded_tsv *uploaded_tsvs = NULL;
+
+ target_preopen (from_tty);
+ if (!filename)
+ error (_("No trace file specified."));
+
+ filename = tilde_expand (filename);
+ if (!IS_ABSOLUTE_PATH(filename))
+ {
+ temp = concat (current_directory, "/", filename, (char *)NULL);
+ xfree (filename);
+ filename = temp;
+ }
+
+ old_chain = make_cleanup (xfree, filename);
+
+ flags = O_BINARY | O_LARGEFILE;
+ flags |= O_RDONLY;
+ scratch_chan = open (filename, flags, 0);
+ if (scratch_chan < 0)
+ perror_with_name (filename);
+
+ /* Looks semi-reasonable. Toss the old trace file and work on the new. */
+
+ discard_cleanups (old_chain); /* Don't free filename any more */
+ unpush_target (&tfile_ops);
+
+ push_target (&tfile_ops);
+
+ trace_filename = xstrdup (filename);
+ trace_fd = scratch_chan;
+
+ bytes = 0;
+ /* Read the file header and test for validity. */
+ gotten = read (trace_fd, &header, TRACE_HEADER_SIZE);
+ if (gotten < 0)
+ perror_with_name (trace_filename);
+ else if (gotten < TRACE_HEADER_SIZE)
+ error (_("Premature end of file while reading trace file"));
+
+ bytes += TRACE_HEADER_SIZE;
+ if (!(header[0] == 0x7f
+ && (strncmp (header + 1, "TRACE0\n", 7) == 0)))
+ error (_("File is not a valid trace file."));
+
+ trace_regblock_size = 0;
+ ts = current_trace_status ();
+ /* We know we're working with a file. */
+ ts->from_file = 1;
+ /* Set defaults in case there is no status line. */
+ ts->running_known = 0;
+ ts->stop_reason = trace_stop_reason_unknown;
+ ts->traceframe_count = -1;
+ ts->buffer_free = 0;
+
+ /* Read through a section of newline-terminated lines that
+ define things like tracepoints. */
+ i = 0;
+ while (1)
+ {
+ gotten = read (trace_fd, &byte, 1);
+ if (gotten < 0)
+ perror_with_name (trace_filename);
+ else if (gotten < 1)
+ error (_("Premature end of file while reading trace file"));
+
+ ++bytes;
+ if (byte == '\n')
+ {
+ /* Empty line marks end of the definition section. */
+ if (i == 0)
+ break;
+ linebuf[i] = '\0';
+ i = 0;
+ tfile_interp_line (linebuf, &uploaded_tps, &uploaded_tsvs);
+ }
+ else
+ linebuf[i++] = byte;
+ if (i >= 1000)
+ error (_("Excessively long lines in trace file"));
+ }
+
+ /* Add the file's tracepoints and variables into the current mix. */
+
+ /* Get trace state variables first, they may be checked when parsing
+ uploaded commands. */
+ merge_uploaded_trace_state_variables (&uploaded_tsvs);
+
+ merge_uploaded_tracepoints (&uploaded_tps);
+
+ /* Record the starting offset of the binary trace data. */
+ trace_frames_offset = bytes;
+
+ /* If we don't have a blocksize, we can't interpret the
+ traceframes. */
+ if (trace_regblock_size == 0)
+ error (_("No register block size recorded in trace file"));
+ if (ts->traceframe_count <= 0)
+ {
+ warning ("No traceframes present in this file.");
+ return;
+ }
+
+#define TFILE_PID (1)
+ inferior_appeared (current_inferior (), TFILE_PID);
+ inferior_ptid = pid_to_ptid (TFILE_PID);
+ add_thread_silent (inferior_ptid);
+
+ post_create_inferior (&tfile_ops, from_tty);
+
+#if 0
+ /* FIXME this will get defined in MI patch submission */
+ tfind_1 (tfind_number, 0, 0, 0, 0);
+#endif
+}
+
+/* Interpret the given line from the definitions part of the trace
+ file. */
+
+static void
+tfile_interp_line (char *line,
+ struct uploaded_tp **utpp, struct uploaded_tsv **utsvp)
+{
+ char *p = line;
+
+ if (strncmp (p, "R ", strlen ("R ")) == 0)
+ {
+ p += strlen ("R ");
+ trace_regblock_size = strtol (p, &p, 16);
+ }
+ else if (strncmp (p, "status ", strlen ("status ")) == 0)
+ {
+ p += strlen ("status ");
+ parse_trace_status (p, current_trace_status ());
+ }
+ else if (strncmp (p, "tp ", strlen ("tp ")) == 0)
+ {
+ p += strlen ("tp ");
+ parse_tracepoint_definition (p, utpp);
+ }
+ else if (strncmp (p, "tsv ", strlen ("tsv ")) == 0)
+ {
+ p += strlen ("tsv ");
+ parse_tsv_definition (p, utsvp);
+ }
+ else
+ warning ("Ignoring trace file definition \"%s\"", line);
+}
+
+/* Parse the part of trace status syntax that is shared between
+ the remote protocol and the trace file reader. */
+
+extern char *unpack_varlen_hex (char *buff, ULONGEST *result);
+
+void
+parse_trace_status (char *line, struct trace_status *ts)
+{
+ char *p = line, *p1, *p2, *p_temp;
+ ULONGEST val;
+
+ ts->running_known = 1;
+ ts->running = (*p++ == '1');
+ ts->stop_reason = trace_stop_reason_unknown;
+ xfree (ts->error_desc);
+ ts->error_desc = NULL;
+ ts->traceframe_count = -1;
+ ts->traceframes_created = -1;
+ ts->buffer_free = -1;
+ ts->buffer_size = -1;
+
+ while (*p++)
+ {
+ p1 = strchr (p, ':');
+ if (p1 == NULL)
+ error (_("Malformed trace status, at %s\n\
+Status line: '%s'\n"), p, line);
+ if (strncmp (p, stop_reason_names[trace_buffer_full], p1 - p) == 0)
+ {
+ p = unpack_varlen_hex (++p1, &val);
+ ts->stop_reason = trace_buffer_full;
+ }
+ else if (strncmp (p, stop_reason_names[trace_never_run], p1 - p) == 0)
+ {
+ p = unpack_varlen_hex (++p1, &val);
+ ts->stop_reason = trace_never_run;
+ }
+ else if (strncmp (p, stop_reason_names[tracepoint_passcount], p1 - p) == 0)
+ {
+ p = unpack_varlen_hex (++p1, &val);
+ ts->stop_reason = tracepoint_passcount;
+ ts->stopping_tracepoint = val;
+ }
+ else if (strncmp (p, stop_reason_names[tstop_command], p1 - p) == 0)
+ {
+ p = unpack_varlen_hex (++p1, &val);
+ ts->stop_reason = tstop_command;
+ }
+ else if (strncmp (p, stop_reason_names[tracepoint_error], p1 - p) == 0)
+ {
+ p2 = strchr (++p1, ':');
+ if (p2 != p1)
+ {
+ int end;
+
+ ts->error_desc = xmalloc ((p2 - p1) / 2 + 1);
+ end = hex2bin (p1, ts->error_desc, (p2 - p1) / 2);
+ ts->error_desc[end] = '\0';
+ }
+ else
+ ts->error_desc = xstrdup ("");
+
+ p = unpack_varlen_hex (++p2, &val);
+ ts->stopping_tracepoint = val;
+ ts->stop_reason = tracepoint_error;
+ }
+ else if (strncmp (p, "tframes", p1 - p) == 0)
+ {
+ p = unpack_varlen_hex (++p1, &val);
+ ts->traceframe_count = val;
+ }
+ else if (strncmp (p, "tcreated", p1 - p) == 0)
+ {
+ p = unpack_varlen_hex (++p1, &val);
+ ts->traceframes_created = val;
+ }
+ else if (strncmp (p, "tfree", p1 - p) == 0)
+ {
+ p = unpack_varlen_hex (++p1, &val);
+ ts->buffer_free = val;
+ }
+ else if (strncmp (p, "tsize", p1 - p) == 0)
+ {
+ p = unpack_varlen_hex (++p1, &val);
+ ts->buffer_size = val;
+ }
+ else
+ {
+ /* Silently skip unknown optional info. */
+ p_temp = strchr (p1 + 1, ';');
+ if (p_temp)
+ p = p_temp;
+ else
+ /* Must be at the end. */
+ break;
+ }
+ }
+}
+
+/* Given a line of text defining a part of a tracepoint, parse it into
+ an "uploaded tracepoint". */
+
+void
+parse_tracepoint_definition (char *line, struct uploaded_tp **utpp)
+{
+ char *p;
+ char piece;
+ ULONGEST num, addr, step, pass, orig_size, xlen, start;
+ int enabled, i, end;
+ enum bptype type;
+ char *cond, *srctype, *src, *buf;
+ struct uploaded_tp *utp = NULL;
+
+ p = line;
+ /* Both tracepoint and action definitions start with the same number
+ and address sequence. */
+ piece = *p++;
+ p = unpack_varlen_hex (p, &num);
+ p++; /* skip a colon */
+ p = unpack_varlen_hex (p, &addr);
+ p++; /* skip a colon */
+ if (piece == 'T')
+ {
+ enabled = (*p++ == 'E');
+ p++; /* skip a colon */
+ p = unpack_varlen_hex (p, &step);
+ p++; /* skip a colon */
+ p = unpack_varlen_hex (p, &pass);
+ type = bp_tracepoint;
+ cond = NULL;
+ /* Thumb through optional fields. */
+ while (*p == ':')
+ {
+ p++; /* skip a colon */
+ if (*p == 'F')
+ {
+ type = bp_fast_tracepoint;
+ p++;
+ p = unpack_varlen_hex (p, &orig_size);
+ }
+ else if (*p == 'X')
+ {
+ p++;
+ p = unpack_varlen_hex (p, &xlen);
+ p++; /* skip a comma */
+ cond = (char *) xmalloc (2 * xlen + 1);
+ strncpy (cond, p, 2 * xlen);
+ cond[2 * xlen] = '\0';
+ p += 2 * xlen;
+ }
+ else
+ warning (_("Unrecognized char '%c' in tracepoint definition, skipping rest"), *p);
+ }
+ utp = get_uploaded_tp (num, addr, utpp);
+ utp->type = type;
+ utp->enabled = enabled;
+ utp->step = step;
+ utp->pass = pass;
+ utp->cond = cond;
+ }
+ else if (piece == 'A')
+ {
+ utp = get_uploaded_tp (num, addr, utpp);
+ VEC_safe_push (char_ptr, utp->actions, xstrdup (p));
+ }
+ else if (piece == 'S')
+ {
+ utp = get_uploaded_tp (num, addr, utpp);
+ VEC_safe_push (char_ptr, utp->step_actions, xstrdup (p));
+ }
+ else if (piece == 'Z')
+ {
+ /* Parse a chunk of source form definition. */
+ utp = get_uploaded_tp (num, addr, utpp);
+ srctype = p;
+ p = strchr (p, ':');
+ p++; /* skip a colon */
+ p = unpack_varlen_hex (p, &start);
+ p++; /* skip a colon */
+ p = unpack_varlen_hex (p, &xlen);
+ p++; /* skip a colon */
+
+ buf = alloca (strlen (line));
+
+ end = hex2bin (p, (gdb_byte *) buf, strlen (p) / 2);
+ buf[end] = '\0';
+
+ if (strncmp (srctype, "at:", strlen ("at:")) == 0)
+ utp->at_string = xstrdup (buf);
+ else if (strncmp (srctype, "cond:", strlen ("cond:")) == 0)
+ utp->cond_string = xstrdup (buf);
+ else if (strncmp (srctype, "cmd:", strlen ("cmd:")) == 0)
+ VEC_safe_push (char_ptr, utp->cmd_strings, xstrdup (buf));
+ }
+ else
+ {
+ /* Don't error out, the target might be sending us optional
+ info that we don't care about. */
+ warning (_("Unrecognized tracepoint piece '%c', ignoring"), piece);
+ }
+}
+
+/* Convert a textual description of a trace state variable into an
+ uploaded object. */
+
+void
+parse_tsv_definition (char *line, struct uploaded_tsv **utsvp)
+{
+ char *p, *buf;
+ ULONGEST num, initval, builtin;
+ int end;
+ struct uploaded_tsv *utsv = NULL;
+
+ buf = alloca (strlen (line));
+
+ p = line;
+ p = unpack_varlen_hex (p, &num);
+ p++; /* skip a colon */
+ p = unpack_varlen_hex (p, &initval);
+ p++; /* skip a colon */
+ p = unpack_varlen_hex (p, &builtin);
+ p++; /* skip a colon */
+ end = hex2bin (p, (gdb_byte *) buf, strlen (p) / 2);
+ buf[end] = '\0';
+
+ utsv = get_uploaded_tsv (num, utsvp);
+ utsv->initial_value = initval;
+ utsv->builtin = builtin;
+ utsv->name = xstrdup (buf);
+}
+
+/* Close the trace file and generally clean up. */
+
+static void
+tfile_close (int quitting)
+{
+ int pid;
+
+ if (trace_fd < 0)
+ return;
+
+ pid = ptid_get_pid (inferior_ptid);
+ inferior_ptid = null_ptid; /* Avoid confusion from thread stuff */
+ exit_inferior_silent (pid);
+
+ close (trace_fd);
+ trace_fd = -1;
+ if (trace_filename)
+ xfree (trace_filename);
+}
+
+static void
+tfile_files_info (struct target_ops *t)
+{
+ /* (it would be useful to mention the name of the file) */
+ printf_filtered ("Looking at a trace file.\n");
+}
+
+/* The trace status for a file is that tracing can never be run. */
+
+static int
+tfile_get_trace_status (struct trace_status *ts)
+{
+ /* Other bits of trace status were collected as part of opening the
+ trace files, so nothing to do here. */
+
+ return -1;
+}
+
+/* Given the position of a traceframe in the file, figure out what
+ address the frame was collected at. This would normally be the
+ value of a collected PC register, but if not available, we
+ improvise. */
+
+static ULONGEST
+tfile_get_traceframe_address (off_t tframe_offset)
+{
+ ULONGEST addr = 0;
+ short tpnum;
+ struct breakpoint *tp;
+ off_t saved_offset = cur_offset;
+ int gotten;
+
+ /* FIXME dig pc out of collected registers */
+
+ /* Fall back to using tracepoint address. */
+ lseek (trace_fd, tframe_offset, SEEK_SET);
+ gotten = read (trace_fd, &tpnum, 2);
+ if (gotten < 0)
+ perror_with_name (trace_filename);
+ else if (gotten < 2)
+ error (_("Premature end of file while reading trace file"));
+
+ tp = get_tracepoint_by_number_on_target (tpnum);
+ /* FIXME this is a poor heuristic if multiple locations */
+ if (tp && tp->loc)
+ addr = tp->loc->address;
+
+ /* Restore our seek position. */
+ cur_offset = saved_offset;
+ lseek (trace_fd, cur_offset, SEEK_SET);
+ return addr;
+}
+
+/* Given a type of search and some parameters, scan the collection of
+ traceframes in the file looking for a match. When found, return
+ both the traceframe and tracepoint number, otherwise -1 for
+ each. */
+
+static int
+tfile_trace_find (enum trace_find_type type, int num,
+ ULONGEST addr1, ULONGEST addr2, int *tpp)
+{
+ short tpnum;
+ int tfnum = 0, found = 0, gotten;
+ int data_size;
+ struct breakpoint *tp;
+ off_t offset, tframe_offset;
+ ULONGEST tfaddr;
+
+ lseek (trace_fd, trace_frames_offset, SEEK_SET);
+ offset = trace_frames_offset;
+ while (1)
+ {
+ tframe_offset = offset;
+ gotten = read (trace_fd, &tpnum, 2);
+ if (gotten < 0)
+ perror_with_name (trace_filename);
+ else if (gotten < 2)
+ error (_("Premature end of file while reading trace file"));
+ offset += 2;
+ if (tpnum == 0)
+ break;
+ gotten = read (trace_fd, &data_size, 4);
+ if (gotten < 0)
+ perror_with_name (trace_filename);
+ else if (gotten < 4)
+ error (_("Premature end of file while reading trace file"));
+ offset += 4;
+ switch (type)
+ {
+ case tfind_number:
+ if (tfnum == num)
+ found = 1;
+ break;
+ case tfind_pc:
+ tfaddr = tfile_get_traceframe_address (tframe_offset);
+ if (tfaddr == addr1)
+ found = 1;
+ break;
+ case tfind_tp:
+ tp = get_tracepoint (num);
+ if (tp && tpnum == tp->number_on_target)
+ found = 1;
+ break;
+ case tfind_range:
+ tfaddr = tfile_get_traceframe_address (tframe_offset);
+ if (addr1 <= tfaddr && tfaddr <= addr2)
+ found = 1;
+ break;
+ case tfind_outside:
+ tfaddr = tfile_get_traceframe_address (tframe_offset);
+ if (!(addr1 <= tfaddr && tfaddr <= addr2))
+ found = 1;
+ break;
+ default:
+ internal_error (__FILE__, __LINE__, _("unknown tfind type"));
+ }
+ if (found)
+ {
+ if (tpp)
+ *tpp = tpnum;
+ cur_offset = offset;
+ cur_data_size = data_size;
+ return tfnum;
+ }
+ /* Skip past the traceframe's data. */
+ lseek (trace_fd, data_size, SEEK_CUR);
+ offset += data_size;
+ /* Update our own count of traceframes. */
+ ++tfnum;
+ }
+ /* Did not find what we were looking for. */
+ if (tpp)
+ *tpp = -1;
+ return -1;
+}
+
+/* Look for a block of saved registers in the traceframe, and get the
+ requested register from it. */
+
+static void
+tfile_fetch_registers (struct target_ops *ops,
+ struct regcache *regcache, int regno)
+{
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ char block_type;
+ int i, pos, offset, regn, regsize, gotten, pc_regno;
+ unsigned short mlen;
+ char *regs;
+
+ /* An uninitialized reg size says we're not going to be
+ successful at getting register blocks. */
+ if (!trace_regblock_size)
+ return;
+
+ regs = alloca (trace_regblock_size);
+
+ lseek (trace_fd, cur_offset, SEEK_SET);
+ pos = 0;
+ while (pos < cur_data_size)
+ {
+ gotten = read (trace_fd, &block_type, 1);
+ if (gotten < 0)
+ perror_with_name (trace_filename);
+ else if (gotten < 1)
+ error (_("Premature end of file while reading trace file"));
+
+ ++pos;
+ switch (block_type)
+ {
+ case 'R':
+ gotten = read (trace_fd, regs, trace_regblock_size);
+ if (gotten < 0)
+ perror_with_name (trace_filename);
+ else if (gotten < trace_regblock_size)
+ error (_("Premature end of file while reading trace file"));
+
+ /* Assume the block is laid out in GDB register number order,
+ each register with the size that it has in GDB. */
+ offset = 0;
+ for (regn = 0; regn < gdbarch_num_regs (gdbarch); regn++)
+ {
+ regsize = register_size (gdbarch, regn);
+ /* Make sure we stay within block bounds. */
+ if (offset + regsize >= trace_regblock_size)
+ break;
+ if (!regcache_valid_p (regcache, regn))
+ {
+ if (regno == regn)
+ {
+ regcache_raw_supply (regcache, regno, regs + offset);
+ break;
+ }
+ else if (regno == -1)
+ {
+ regcache_raw_supply (regcache, regn, regs + offset);
+ }
+ }
+ offset += regsize;
+ }
+ return;
+ case 'M':
+ lseek (trace_fd, 8, SEEK_CUR);
+ gotten = read (trace_fd, &mlen, 2);
+ if (gotten < 0)
+ perror_with_name (trace_filename);
+ else if (gotten < 2)
+ error (_("Premature end of file while reading trace file"));
+ lseek (trace_fd, mlen, SEEK_CUR);
+ pos += (8 + 2 + mlen);
+ break;
+ case 'V':
+ lseek (trace_fd, 4 + 8, SEEK_CUR);
+ pos += (4 + 8);
+ break;
+ default:
+ error ("Unknown block type '%c' (0x%x) in trace frame",
+ block_type, block_type);
+ break;
+ }
+ }
+
+ /* We get here if no register data has been found. Although we
+ don't like making up numbers, GDB has all manner of troubles when
+ the target says some register is not available. Filling in with
+ zeroes is a reasonable fallback. */
+ for (regn = 0; regn < gdbarch_num_regs (gdbarch); regn++)
+ regcache_raw_supply (regcache, regn, NULL);
+
+ /* We can often usefully guess that the PC is going to be the same
+ as the address of the tracepoint. */
+ pc_regno = gdbarch_pc_regnum (gdbarch);
+ if (pc_regno >= 0 && (regno == -1 || regno == pc_regno))
+ {
+ struct breakpoint *tp = get_tracepoint (tracepoint_number);
+
+ if (tp && tp->loc)
+ {
+ /* But don't try to guess if tracepoint is multi-location... */
+ if (tp->loc->next)
+ {
+ warning ("Tracepoint %d has multiple locations, cannot infer $pc",
+ tp->number);
+ return;
+ }
+ /* ... or does while-stepping. */
+ if (tp->step_count > 0)
+ {
+ warning ("Tracepoint %d does while-stepping, cannot infer $pc",
+ tp->number);
+ return;
+ }
+
+ store_unsigned_integer (regs, register_size (gdbarch, pc_regno),
+ gdbarch_byte_order (gdbarch),
+ tp->loc->address);
+ regcache_raw_supply (regcache, pc_regno, regs);
+ }
+ }
+}
+
+static LONGEST
+tfile_xfer_partial (struct target_ops *ops, enum target_object object,
+ const char *annex, gdb_byte *readbuf,
+ const gdb_byte *writebuf, ULONGEST offset, LONGEST len)
+{
+ char block_type;
+ int pos, gotten;
+ ULONGEST maddr, amt;
+ unsigned short mlen;
+
+ /* We're only doing regular memory for now. */
+ if (object != TARGET_OBJECT_MEMORY)
+ return -1;
+
+ if (readbuf == NULL)
+ error ("tfile_xfer_partial: trace file is read-only");
+
+ lseek (trace_fd, cur_offset, SEEK_SET);
+ pos = 0;
+ while (pos < cur_data_size)
+ {
+ gotten = read (trace_fd, &block_type, 1);
+ if (gotten < 0)
+ perror_with_name (trace_filename);
+ else if (gotten < 1)
+ error (_("Premature end of file while reading trace file"));
+ ++pos;
+ switch (block_type)
+ {
+ case 'R':
+ lseek (trace_fd, trace_regblock_size, SEEK_CUR);
+ pos += trace_regblock_size;
+ break;
+ case 'M':
+ gotten = read (trace_fd, &maddr, 8);
+ if (gotten < 0)
+ perror_with_name (trace_filename);
+ else if (gotten < 8)
+ error (_("Premature end of file while reading trace file"));
+
+ gotten = read (trace_fd, &mlen, 2);
+ if (gotten < 0)
+ perror_with_name (trace_filename);
+ else if (gotten < 2)
+ error (_("Premature end of file while reading trace file"));
+ /* If the block includes the first part of the desired
+ range, return as much it has; GDB will re-request the
+ remainder, which might be in a different block of this
+ trace frame. */
+ if (maddr <= offset && offset < (maddr + mlen))
+ {
+ amt = (maddr + mlen) - offset;
+ if (amt > len)
+ amt = len;
+
+ read (trace_fd, readbuf, amt);
+ return amt;
+ }
+ lseek (trace_fd, mlen, SEEK_CUR);
+ pos += (8 + 2 + mlen);
+ break;
+ case 'V':
+ lseek (trace_fd, 4 + 8, SEEK_CUR);
+ pos += (4 + 8);
+ break;
+ default:
+ error ("Unknown block type '%c' (0x%x) in traceframe",
+ block_type, block_type);
+ break;
+ }
+ }
+
+ /* It's unduly pedantic to refuse to look at the executable for
+ read-only pieces; so do the equivalent of readonly regions aka
+ QTro packet. */
+ /* FIXME account for relocation at some point */
+ if (exec_bfd)
+ {
+ asection *s;
+ bfd_size_type size;
+ bfd_vma lma;
+
+ for (s = exec_bfd->sections; s; s = s->next)
+ {
+ if ((s->flags & SEC_LOAD) == 0 ||
+ (s->flags & SEC_READONLY) == 0)
+ continue;
+
+ lma = s->lma;
+ size = bfd_get_section_size (s);
+ if (lma <= offset && offset < (lma + size))
+ {
+ amt = (lma + size) - offset;
+ if (amt > len)
+ amt = len;
+
+ amt = bfd_get_section_contents (exec_bfd, s,
+ readbuf, offset - lma, amt);
+ return amt;
+ }
+ }
+ }
+
+ /* Indicate failure to find the requested memory block. */
+ return -1;
+}
+
+/* Iterate through the blocks of a trace frame, looking for a 'V'
+ block with a matching tsv number. */
+
+static int
+tfile_get_trace_state_variable_value (int tsvnum, LONGEST *val)
+{
+ char block_type;
+ int pos, vnum, gotten;
+ unsigned short mlen;
+
+ lseek (trace_fd, cur_offset, SEEK_SET);
+ pos = 0;
+ while (pos < cur_data_size)
+ {
+ gotten = read (trace_fd, &block_type, 1);
+ if (gotten < 0)
+ perror_with_name (trace_filename);
+ else if (gotten < 1)
+ error (_("Premature end of file while reading trace file"));
+ ++pos;
+ switch (block_type)
+ {
+ case 'R':
+ lseek (trace_fd, trace_regblock_size, SEEK_CUR);
+ pos += trace_regblock_size;
+ break;
+ case 'M':
+ lseek (trace_fd, 8, SEEK_CUR);
+ gotten = read (trace_fd, &mlen, 2);
+ if (gotten < 0)
+ perror_with_name (trace_filename);
+ else if (gotten < 2)
+ error (_("Premature end of file while reading trace file"));
+ lseek (trace_fd, mlen, SEEK_CUR);
+ pos += (8 + 2 + mlen);
+ break;
+ case 'V':
+ gotten = read (trace_fd, &vnum, 4);
+ if (gotten < 0)
+ perror_with_name (trace_filename);
+ else if (gotten < 4)
+ error (_("Premature end of file while reading trace file"));
+ if (tsvnum == vnum)
+ {
+ gotten = read (trace_fd, val, 8);
+ if (gotten < 0)
+ perror_with_name (trace_filename);
+ else if (gotten < 8)
+ error (_("Premature end of file while reading trace file"));
+ return 1;
+ }
+ lseek (trace_fd, 8, SEEK_CUR);
+ pos += (4 + 8);
+ break;
+ default:
+ error ("Unknown block type '%c' (0x%x) in traceframe",
+ block_type, block_type);
+ break;
+ }
+ }
+ /* Didn't find anything. */
+ return 0;
+}
+
+static int
+tfile_has_all_memory (struct target_ops *ops)
+{
+ return 1;
+}
+
+static int
+tfile_has_memory (struct target_ops *ops)
+{
+ return 1;
+}
+
+static int
+tfile_has_stack (struct target_ops *ops)
+{
+ return 1;
+}
+
+static int
+tfile_has_registers (struct target_ops *ops)
+{
+ return 1;
+}
+
+static void
+init_tfile_ops (void)
+{
+ tfile_ops.to_shortname = "tfile";
+ tfile_ops.to_longname = "Local trace dump file";
+ tfile_ops.to_doc =
+ "Use a trace file as a target. Specify the filename of the trace file.";
+ tfile_ops.to_open = tfile_open;
+ tfile_ops.to_close = tfile_close;
+ tfile_ops.to_fetch_registers = tfile_fetch_registers;
+ tfile_ops.to_xfer_partial = tfile_xfer_partial;
+ tfile_ops.to_files_info = tfile_files_info;
+ tfile_ops.to_get_trace_status = tfile_get_trace_status;
+ tfile_ops.to_trace_find = tfile_trace_find;
+ tfile_ops.to_get_trace_state_variable_value = tfile_get_trace_state_variable_value;
+ /* core_stratum might seem more logical, but GDB doesn't like having
+ more than one core_stratum vector. */
+ tfile_ops.to_stratum = process_stratum;
+ tfile_ops.to_has_all_memory = tfile_has_all_memory;
+ tfile_ops.to_has_memory = tfile_has_memory;
+ tfile_ops.to_has_stack = tfile_has_stack;
+ tfile_ops.to_has_registers = tfile_has_registers;
+ tfile_ops.to_magic = OPS_MAGIC;
+}
/* module initialization */
void
{
struct cmd_list_element *c;
- tracepoint_chain = 0;
- tracepoint_count = 0;
traceframe_number = -1;
tracepoint_number = -1;
_("Tracing of program execution without stopping the program."),
&cmdlist);
- add_info ("tracepoints", tracepoints_info, _("\
-Status of tracepoints, or tracepoint number NUMBER.\n\
-Convenience variable \"$tpnum\" contains the number of the\n\
-last tracepoint set."));
+ add_com ("tdump", class_trace, trace_dump_command,
+ _("Print everything collected at the current tracepoint."));
- add_info_alias ("tp", "tracepoints", 1);
+ add_com ("tsave", class_trace, trace_save_command, _("\
+Save the trace data to a file.\n\
+Use the '-r' option to direct the target to save directly to the file,\n\
+using its own filesystem."));
- c = add_com ("save-tracepoints", class_trace, tracepoint_save_command, _("\
-Save current tracepoint definitions as a script.\n\
-Use the 'source' command in another debug session to restore them."));
- set_cmd_completer (c, filename_completer);
+ c = add_com ("tvariable", class_trace, trace_variable_command,_("\
+Define a trace state variable.\n\
+Argument is a $-prefixed name, optionally followed\n\
+by '=' and an expression that sets the initial value\n\
+at the start of tracing."));
+ set_cmd_completer (c, expression_completer);
- add_com ("tdump", class_trace, trace_dump_command,
- _("Print everything collected at the current tracepoint."));
+ add_cmd ("tvariable", class_trace, delete_trace_variable_command, _("\
+Delete one or more trace state variables.\n\
+Arguments are the names of the variables to delete.\n\
+If no arguments are supplied, delete all variables."), &deletelist);
+ /* FIXME add a trace variable completer */
+
+ add_info ("tvariables", tvariables_info, _("\
+Status of trace state variables and their values.\n\
+"));
add_prefix_cmd ("tfind", class_trace, trace_find_command, _("\
Select a trace frame;\n\
&tfindlist, "tfind ", 1, &cmdlist);
add_cmd ("outside", class_trace, trace_find_outside_command, _("\
-Select a trace frame whose PC is outside the given range.\n\
+Select a trace frame whose PC is outside the given range (exclusive).\n\
Usage: tfind outside addr1, addr2"),
&tfindlist);
add_cmd ("range", class_trace, trace_find_range_command, _("\
-Select a trace frame whose PC is in the given range.\n\
+Select a trace frame whose PC is in the given range (inclusive).\n\
Usage: tfind range addr1,addr2"),
&tfindlist);
add_com ("tstart", class_trace, trace_start_command,
_("Start trace data collection."));
- add_com ("passcount", class_trace, trace_pass_command, _("\
-Set the passcount for a tracepoint.\n\
-The trace will end when the tracepoint has been passed 'count' times.\n\
-Usage: passcount COUNT TPNUM, where TPNUM may also be \"all\";\n\
-if TPNUM is omitted, passcount refers to the last tracepoint defined."));
-
add_com ("end", class_trace, end_actions_pseudocommand, _("\
Ends a list of commands or actions.\n\
Several GDB commands allow you to enter a list of commands or actions.\n\
$locals -- all variables local to the block/function scope.\n\
Note: this command can only be used in a tracepoint \"actions\" list."));
+ add_com ("teval", class_trace, teval_pseudocommand, _("\
+Specify one or more expressions to be evaluated at a tracepoint.\n\
+Accepts a comma-separated list of (one or more) expressions.\n\
+The result of each evaluation will be discarded.\n\
+Note: this command can only be used in a tracepoint \"actions\" list."));
+
add_com ("actions", class_trace, trace_actions_command, _("\
Specify the actions to be taken at a tracepoint.\n\
Tracepoint actions may include collecting of specified data, \n\
single-stepping, or enabling/disabling other tracepoints, \n\
depending on target's capabilities."));
- add_cmd ("tracepoints", class_trace, delete_trace_command, _("\
-Delete specified tracepoints.\n\
-Arguments are tracepoint numbers, separated by spaces.\n\
-No argument means delete all tracepoints."),
- &deletelist);
-
- add_cmd ("tracepoints", class_trace, disable_trace_command, _("\
-Disable specified tracepoints.\n\
-Arguments are tracepoint numbers, separated by spaces.\n\
-No argument means disable all tracepoints."),
- &disablelist);
-
- add_cmd ("tracepoints", class_trace, enable_trace_command, _("\
-Enable specified tracepoints.\n\
-Arguments are tracepoint numbers, separated by spaces.\n\
-No argument means enable all tracepoints."),
- &enablelist);
-
- c = add_com ("trace", class_trace, trace_command, _("\
-Set a tracepoint at a specified line or function or address.\n\
-Argument may be a line number, function name, or '*' plus an address.\n\
-For a line number or function, trace at the start of its code.\n\
-If an address is specified, trace at that exact address.\n\n\
-Do \"help tracepoints\" for info on other tracepoint commands."));
- set_cmd_completer (c, location_completer);
-
- add_com_alias ("tp", "trace", class_alias, 0);
- add_com_alias ("tr", "trace", class_alias, 1);
- add_com_alias ("tra", "trace", class_alias, 1);
- add_com_alias ("trac", "trace", class_alias, 1);
+ default_collect = xstrdup ("");
+ add_setshow_string_cmd ("default-collect", class_trace,
+ &default_collect, _("\
+Set the list of expressions to collect by default"), _("\
+Show the list of expressions to collect by default"), NULL,
+ NULL, NULL,
+ &setlist, &showlist);
+
+ add_setshow_boolean_cmd ("disconnected-tracing", no_class,
+ &disconnected_tracing, _("\
+Set whether tracing continues after GDB disconnects."), _("\
+Show whether tracing continues after GDB disconnects."), _("\
+Use this to continue a tracing run even if GDB disconnects\n\
+or detaches from the target. You can reconnect later and look at\n\
+trace data collected in the meantime."),
+ set_disconnected_tracing,
+ NULL,
+ &setlist,
+ &showlist);
+
+ add_setshow_boolean_cmd ("circular-trace-buffer", no_class,
+ &circular_trace_buffer, _("\
+Set target's use of circular trace buffer."), _("\
+Show target's use of circular trace buffer."), _("\
+Use this to make the trace buffer into a circular buffer,\n\
+which will discard traceframes (oldest first) instead of filling\n\
+up and stopping the trace run."),
+ set_circular_trace_buffer,
+ NULL,
+ &setlist,
+ &showlist);
+
+ init_tfile_ops ();
+
+ add_target (&tfile_ops);
}
projects / deliverable / binutils-gdb.git / blobdiff