/* TUI support I/O functions.
- Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2007
- Free Software Foundation, Inc.
+ Copyright (C) 1998-2020 Free Software Foundation, Inc.
Contributed by Hewlett-Packard Company.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor,
- Boston, MA 02110-1301, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include "target.h"
-#include "event-loop.h"
+#include "gdbsupport/event-loop.h"
#include "event-top.h"
#include "command.h"
#include "top.h"
#include "tui/tui-win.h"
#include "tui/tui-wingeneral.h"
#include "tui/tui-file.h"
+#include "tui/tui-out.h"
#include "ui-out.h"
#include "cli-out.h"
#include <fcntl.h>
#include <signal.h>
-#include <stdio.h>
-
+#ifdef __MINGW32__
+#include <windows.h>
+#endif
+#include "gdbsupport/filestuff.h"
+#include "completer.h"
#include "gdb_curses.h"
+#include <map>
/* This redefines CTRL if it is not already defined, so it must come
after terminal state releated include files like <term.h> and
"gdb_curses.h". */
#include "readline/readline.h"
-int
-key_is_start_sequence (int ch)
-{
- return (ch == 27);
-}
-
-int
-key_is_end_sequence (int ch)
-{
- return (ch == 126);
-}
+#ifdef __MINGW32__
+static SHORT ncurses_norm_attr;
+#endif
-int
-key_is_backspace (int ch)
-{
- return (ch == 8);
-}
+static int tui_getc (FILE *fp);
-int
-key_is_command_char (int ch)
+static int
+key_is_start_sequence (int ch)
{
- return ((ch == KEY_NPAGE) || (ch == KEY_PPAGE)
- || (ch == KEY_LEFT) || (ch == KEY_RIGHT)
- || (ch == KEY_UP) || (ch == KEY_DOWN)
- || (ch == KEY_SF) || (ch == KEY_SR)
- || (ch == (int)'\f') || key_is_start_sequence (ch));
+ return (ch == 27);
}
/* Use definition from readline 4.3. */
be garbled. This is implemented with a pipe that TUI reads and
readline writes to. A gdb input handler is created so that reading
the pipe is handled automatically. This will probably not work on
- non-Unix platforms. The best fix is to make readline clean enougth
+ non-Unix platforms. The best fix is to make readline clean enough
so that is never write on stdout.
Note SCz/2002-09-01: we now use more readline hooks and it seems
#undef TUI_USE_PIPE_FOR_READLINE. */
/* For gdb 5.3, prefer to continue the pipe hack as a backup wheel. */
+#ifdef HAVE_PIPE
#define TUI_USE_PIPE_FOR_READLINE
+#endif
/* #undef TUI_USE_PIPE_FOR_READLINE */
/* TUI output files. */
/* GDB output files in non-curses mode. */
static struct ui_file *tui_old_stdout;
static struct ui_file *tui_old_stderr;
-struct ui_out *tui_old_uiout;
+cli_ui_out *tui_old_uiout;
/* Readline previous hooks. */
-static Function *tui_old_rl_getc_function;
-static VFunction *tui_old_rl_redisplay_function;
-static VFunction *tui_old_rl_prep_terminal;
-static VFunction *tui_old_rl_deprep_terminal;
-static int tui_old_readline_echoing_p;
+static rl_getc_func_t *tui_old_rl_getc_function;
+static rl_voidfunc_t *tui_old_rl_redisplay_function;
+static rl_vintfunc_t *tui_old_rl_prep_terminal;
+static rl_voidfunc_t *tui_old_rl_deprep_terminal;
+static rl_compdisp_func_t *tui_old_rl_display_matches_hook;
+static int tui_old_rl_echoing_p;
/* Readline output stream.
Should be removed when readline is clean. */
static int tui_readline_pipe[2];
#endif
-/* The last gdb prompt that was registered in readline.
- This may be the main gdb prompt or a secondary prompt. */
-static char *tui_rl_saved_prompt;
+/* Print a character in the curses command window. The output is
+ buffered. It is up to the caller to refresh the screen if
+ necessary. */
+
+static void
+do_tui_putc (WINDOW *w, char c)
+{
+ /* Expand TABs, since ncurses on MS-Windows doesn't. */
+ if (c == '\t')
+ {
+ int col;
+
+ col = getcurx (w);
+ do
+ {
+ waddch (w, ' ');
+ col++;
+ }
+ while ((col % 8) != 0);
+ }
+ else
+ waddch (w, c);
+}
-static unsigned int tui_handle_resize_during_io (unsigned int);
+/* Update the cached value of the command window's start line based on
+ the window's current Y coordinate. */
+
+static void
+update_cmdwin_start_line ()
+{
+ TUI_CMD_WIN->start_line = getcury (TUI_CMD_WIN->handle.get ());
+}
+
+/* Print a character in the curses command window. The output is
+ buffered. It is up to the caller to refresh the screen if
+ necessary. */
static void
tui_putc (char c)
{
- char buf[2];
+ do_tui_putc (TUI_CMD_WIN->handle.get (), c);
+ update_cmdwin_start_line ();
+}
+
+/* This maps colors to their corresponding color index. */
+
+static std::map<ui_file_style::color, int> color_map;
+
+/* This holds a pair of colors and is used to track the mapping
+ between a color pair index and the actual colors. */
+
+struct color_pair
+{
+ int fg;
+ int bg;
+
+ bool operator< (const color_pair &o) const
+ {
+ return fg < o.fg || (fg == o.fg && bg < o.bg);
+ }
+};
+
+/* This maps pairs of colors to their corresponding color pair
+ index. */
+
+static std::map<color_pair, int> color_pair_map;
+
+/* This is indexed by ANSI color offset from the base color, and holds
+ the corresponding curses color constant. */
+
+static const int curses_colors[] = {
+ COLOR_BLACK,
+ COLOR_RED,
+ COLOR_GREEN,
+ COLOR_YELLOW,
+ COLOR_BLUE,
+ COLOR_MAGENTA,
+ COLOR_CYAN,
+ COLOR_WHITE
+};
+
+/* Given a color, find its index. */
+
+static bool
+get_color (const ui_file_style::color &color, int *result)
+{
+ if (color.is_none ())
+ *result = -1;
+ else if (color.is_basic ())
+ *result = curses_colors[color.get_value ()];
+ else
+ {
+ auto it = color_map.find (color);
+ if (it == color_map.end ())
+ {
+ /* The first 8 colors are standard. */
+ int next = color_map.size () + 8;
+ if (next >= COLORS)
+ return false;
+ uint8_t rgb[3];
+ color.get_rgb (rgb);
+ /* We store RGB as 0..255, but curses wants 0..1000. */
+ if (init_color (next, rgb[0] * 1000 / 255, rgb[1] * 1000 / 255,
+ rgb[2] * 1000 / 255) == ERR)
+ return false;
+ color_map[color] = next;
+ *result = next;
+ }
+ else
+ *result = it->second;
+ }
+ return true;
+}
+
+/* The most recently emitted color pair. */
+
+static int last_color_pair = -1;
+
+/* The most recently applied style. */
+
+static ui_file_style last_style;
+
+/* If true, we're highlighting the current source line in reverse
+ video mode. */
+static bool reverse_mode_p = false;
+
+/* The background/foreground colors before we entered reverse
+ mode. */
+static ui_file_style::color reverse_save_bg (ui_file_style::NONE);
+static ui_file_style::color reverse_save_fg (ui_file_style::NONE);
+
+/* Given two colors, return their color pair index; making a new one
+ if necessary. */
- buf[0] = c;
- buf[1] = 0;
- tui_puts (buf);
+static int
+get_color_pair (int fg, int bg)
+{
+ color_pair c = { fg, bg };
+ auto it = color_pair_map.find (c);
+ if (it == color_pair_map.end ())
+ {
+ /* Color pair 0 is our default color, so new colors start at
+ 1. */
+ int next = color_pair_map.size () + 1;
+ /* Curses has a limited number of available color pairs. Fall
+ back to the default if we've used too many. */
+ if (next >= COLOR_PAIRS)
+ return 0;
+ init_pair (next, fg, bg);
+ color_pair_map[c] = next;
+ return next;
+ }
+ return it->second;
}
-/* Print the string in the curses command window. */
+/* Apply STYLE to W. */
+
void
-tui_puts (const char *string)
+tui_apply_style (WINDOW *w, ui_file_style style)
+{
+ /* Reset. */
+ wattron (w, A_NORMAL);
+ wattroff (w, A_BOLD);
+ wattroff (w, A_DIM);
+ wattroff (w, A_REVERSE);
+ if (last_color_pair != -1)
+ wattroff (w, COLOR_PAIR (last_color_pair));
+ wattron (w, COLOR_PAIR (0));
+
+ const ui_file_style::color &fg = style.get_foreground ();
+ const ui_file_style::color &bg = style.get_background ();
+ if (!fg.is_none () || !bg.is_none ())
+ {
+ int fgi, bgi;
+ if (get_color (fg, &fgi) && get_color (bg, &bgi))
+ {
+#ifdef __MINGW32__
+ /* MS-Windows port of ncurses doesn't support implicit
+ default foreground and background colors, so we must
+ specify them explicitly when needed, using the colors we
+ saw at startup. */
+ if (fgi == -1)
+ fgi = ncurses_norm_attr & 15;
+ if (bgi == -1)
+ bgi = (ncurses_norm_attr >> 4) & 15;
+#endif
+ int pair = get_color_pair (fgi, bgi);
+ if (last_color_pair != -1)
+ wattroff (w, COLOR_PAIR (last_color_pair));
+ wattron (w, COLOR_PAIR (pair));
+ last_color_pair = pair;
+ }
+ }
+
+ switch (style.get_intensity ())
+ {
+ case ui_file_style::NORMAL:
+ break;
+
+ case ui_file_style::BOLD:
+ wattron (w, A_BOLD);
+ break;
+
+ case ui_file_style::DIM:
+ wattron (w, A_DIM);
+ break;
+
+ default:
+ gdb_assert_not_reached ("invalid intensity");
+ }
+
+ if (style.is_reverse ())
+ wattron (w, A_REVERSE);
+
+ last_style = style;
+}
+
+/* Apply an ANSI escape sequence from BUF to W. BUF must start with
+ the ESC character. If BUF does not start with an ANSI escape,
+ return 0. Otherwise, apply the sequence if it is recognized, or
+ simply ignore it if not. In this case, the number of bytes read
+ from BUF is returned. */
+
+static size_t
+apply_ansi_escape (WINDOW *w, const char *buf)
+{
+ ui_file_style style = last_style;
+ size_t n_read;
+
+ if (!style.parse (buf, &n_read))
+ return n_read;
+
+ if (reverse_mode_p)
+ {
+ /* We want to reverse _only_ the default foreground/background
+ colors. If the foreground color is not the default (because
+ the text was styled), we want to leave it as is. If e.g.,
+ the terminal is fg=BLACK, and bg=WHITE, and the style wants
+ to print text in RED, we want to reverse the background color
+ (print in BLACK), but still print the text in RED. To do
+ that, we enable the A_REVERSE attribute, and re-reverse the
+ parsed-style's fb/bg colors.
+
+ Notes on the approach:
+
+ - there's no portable way to know which colors the default
+ fb/bg colors map to.
+
+ - this approach does the right thing even if you change the
+ terminal colors while GDB is running -- the reversed
+ colors automatically adapt.
+ */
+ if (!style.is_default ())
+ {
+ ui_file_style::color bg = style.get_background ();
+ ui_file_style::color fg = style.get_foreground ();
+ style.set_fg (bg);
+ style.set_bg (fg);
+ }
+
+ /* Enable A_REVERSE. */
+ style.set_reverse (true);
+ }
+
+ tui_apply_style (w, style);
+ return n_read;
+}
+
+/* See tui.io.h. */
+
+void
+tui_set_reverse_mode (WINDOW *w, bool reverse)
+{
+ ui_file_style style = last_style;
+
+ reverse_mode_p = reverse;
+ style.set_reverse (reverse);
+
+ if (reverse)
+ {
+ reverse_save_bg = style.get_background ();
+ reverse_save_fg = style.get_foreground ();
+ }
+ else
+ {
+ style.set_bg (reverse_save_bg);
+ style.set_fg (reverse_save_fg);
+ }
+
+ tui_apply_style (w, style);
+}
+
+/* Print LENGTH characters from the buffer pointed to by BUF to the
+ curses command window. The output is buffered. It is up to the
+ caller to refresh the screen if necessary. */
+
+void
+tui_write (const char *buf, size_t length)
+{
+ /* We need this to be \0-terminated for the regexp matching. */
+ std::string copy (buf, length);
+ tui_puts (copy.c_str ());
+}
+
+static void
+tui_puts_internal (WINDOW *w, const char *string, int *height)
{
- static int tui_skip_line = -1;
char c;
- WINDOW *w;
+ int prev_col = 0;
+ bool saw_nl = false;
- w = TUI_CMD_WIN->generic.handle;
while ((c = *string++) != 0)
{
- /* Catch annotation and discard them. We need two \032 and
- discard until a \n is seen. */
- if (c == '\032')
- {
- tui_skip_line++;
- }
- else if (tui_skip_line != 1)
- {
- tui_skip_line = -1;
- waddch (w, c);
- }
- else if (c == '\n')
- tui_skip_line = -1;
+ if (c == '\n')
+ saw_nl = true;
+
+ if (c == '\1' || c == '\2')
+ {
+ /* Ignore these, they are readline escape-marking
+ sequences. */
+ }
+ else
+ {
+ if (c == '\033')
+ {
+ size_t bytes_read = apply_ansi_escape (w, string - 1);
+ if (bytes_read > 0)
+ {
+ string = string + bytes_read - 1;
+ continue;
+ }
+ }
+ do_tui_putc (w, c);
+
+ if (height != nullptr)
+ {
+ int col = getcurx (w);
+ if (col <= prev_col)
+ ++*height;
+ prev_col = col;
+ }
+ }
}
- getyx (w, TUI_CMD_WIN->detail.command_info.cur_line,
- TUI_CMD_WIN->detail.command_info.curch);
- TUI_CMD_WIN->detail.command_info.start_line = TUI_CMD_WIN->detail.command_info.cur_line;
+ if (TUI_CMD_WIN != nullptr && w == TUI_CMD_WIN->handle.get ())
+ update_cmdwin_start_line ();
+ if (saw_nl)
+ wrefresh (w);
+}
- /* We could defer the following. */
- wrefresh (w);
- fflush (stdout);
+/* Print a string in the curses command window. The output is
+ buffered. It is up to the caller to refresh the screen if
+ necessary. */
+
+void
+tui_puts (const char *string, WINDOW *w)
+{
+ if (w == nullptr)
+ w = TUI_CMD_WIN->handle.get ();
+ tui_puts_internal (w, string, nullptr);
}
/* Readline callback.
{
int prev_col;
int height;
- int col, line;
+ int col;
int c_pos;
int c_line;
int in;
WINDOW *w;
- char *prompt;
+ const char *prompt;
int start_line;
/* Detect when we temporarily left SingleKey and now the readline
edit buffer is empty, automatically restore the SingleKey
- mode. */
- if (tui_current_key_mode == TUI_ONE_COMMAND_MODE && rl_end == 0)
+ mode. The restore must only be done if the command has finished.
+ The command could call prompt_for_continue and we must not
+ restore SingleKey so that the prompt and normal keymap are used. */
+ if (tui_current_key_mode == TUI_ONE_COMMAND_MODE && rl_end == 0
+ && !gdb_in_secondary_prompt_p (current_ui))
tui_set_key_mode (TUI_SINGLE_KEY_MODE);
if (tui_current_key_mode == TUI_SINGLE_KEY_MODE)
prompt = "";
else
- prompt = tui_rl_saved_prompt;
+ prompt = rl_display_prompt;
c_pos = -1;
c_line = -1;
- w = TUI_CMD_WIN->generic.handle;
- start_line = TUI_CMD_WIN->detail.command_info.start_line;
+ w = TUI_CMD_WIN->handle.get ();
+ start_line = TUI_CMD_WIN->start_line;
wmove (w, start_line, 0);
prev_col = 0;
height = 1;
- for (in = 0; prompt && prompt[in]; in++)
- {
- waddch (w, prompt[in]);
- getyx (w, line, col);
- if (col < prev_col)
- height++;
- prev_col = col;
- }
- for (in = 0; in < rl_end; in++)
+ if (prompt != nullptr)
+ tui_puts_internal (w, prompt, &height);
+
+ prev_col = getcurx (w);
+ for (in = 0; in <= rl_end; in++)
{
unsigned char c;
- c = (unsigned char) rl_line_buffer[in];
if (in == rl_point)
{
getyx (w, c_line, c_pos);
}
+ if (in == rl_end)
+ break;
+
+ c = (unsigned char) rl_line_buffer[in];
if (CTRL_CHAR (c) || c == RUBOUT)
{
waddch (w, '^');
waddch (w, CTRL_CHAR (c) ? UNCTRL (c) : '?');
}
+ else if (c == '\t')
+ {
+ /* Expand TABs, since ncurses on MS-Windows doesn't. */
+ col = getcurx (w);
+ do
+ {
+ waddch (w, ' ');
+ col++;
+ } while ((col % 8) != 0);
+ }
else
{
waddch (w, c);
}
if (c == '\n')
- {
- getyx (w, TUI_CMD_WIN->detail.command_info.start_line,
- TUI_CMD_WIN->detail.command_info.curch);
- }
- getyx (w, line, col);
+ TUI_CMD_WIN->start_line = getcury (w);
+ col = getcurx (w);
if (col < prev_col)
height++;
prev_col = col;
}
wclrtobot (w);
- getyx (w, TUI_CMD_WIN->detail.command_info.start_line,
- TUI_CMD_WIN->detail.command_info.curch);
+ TUI_CMD_WIN->start_line = getcury (w);
if (c_line >= 0)
- {
- wmove (w, c_line, c_pos);
- TUI_CMD_WIN->detail.command_info.cur_line = c_line;
- TUI_CMD_WIN->detail.command_info.curch = c_pos;
- }
- TUI_CMD_WIN->detail.command_info.start_line -= height - 1;
+ wmove (w, c_line, c_pos);
+ TUI_CMD_WIN->start_line -= height - 1;
wrefresh (w);
fflush(stdout);
static void
tui_prep_terminal (int notused1)
{
- /* Save the prompt registered in readline to correctly display it.
- (we can't use gdb_prompt() due to secondary prompts and can't use
- rl_prompt because it points to an alloca buffer). */
- xfree (tui_rl_saved_prompt);
- tui_rl_saved_prompt = xstrdup (rl_prompt);
}
/* Readline callback to restore the terminal. It is called once each
/* Read readline output pipe and feed the command window with it.
Should be removed when readline is clean. */
static void
-tui_readline_output (int code, gdb_client_data data)
+tui_readline_output (int error, gdb_client_data data)
{
int size;
char buf[256];
}
#endif
-/* Return the portion of PATHNAME that should be output when listing
- possible completions. If we are hacking filename completion, we
- are only interested in the basename, the portion following the
- final slash. Otherwise, we return what we were passed.
+/* TUI version of displayer.crlf. */
- Comes from readline/complete.c. */
-static char *
-printable_part (char *pathname)
+static void
+tui_mld_crlf (const struct match_list_displayer *displayer)
{
- char *temp;
+ tui_putc ('\n');
+}
- temp = rl_filename_completion_desired ? strrchr (pathname, '/') : (char *)NULL;
-#if defined (__MSDOS__)
- if (rl_filename_completion_desired && temp == 0 && isalpha (pathname[0]) && pathname[1] == ':')
- temp = pathname + 1;
-#endif
- return (temp ? ++temp : pathname);
-}
-
-/* Output TO_PRINT to rl_outstream. If VISIBLE_STATS is defined and
- we are using it, check for and output a single character for
- `special' filenames. Return the number of characters we
- output. */
-
-#define PUTX(c) \
- do { \
- if (CTRL_CHAR (c)) \
- { \
- tui_puts ("^"); \
- tui_putc (UNCTRL (c)); \
- printed_len += 2; \
- } \
- else if (c == RUBOUT) \
- { \
- tui_puts ("^?"); \
- printed_len += 2; \
- } \
- else \
- { \
- tui_putc (c); \
- printed_len++; \
- } \
- } while (0)
+/* TUI version of displayer.putch. */
-static int
-print_filename (char *to_print, char *full_pathname)
+static void
+tui_mld_putch (const struct match_list_displayer *displayer, int ch)
{
- int printed_len = 0;
- char *s;
-
- for (s = to_print; *s; s++)
- {
- PUTX (*s);
- }
- return printed_len;
+ tui_putc (ch);
}
-/* The user must press "y" or "n". Non-zero return means "y" pressed.
- Comes from readline/complete.c. */
-static int
-get_y_or_n (void)
+/* TUI version of displayer.puts. */
+
+static void
+tui_mld_puts (const struct match_list_displayer *displayer, const char *s)
{
- extern int _rl_abort_internal ();
- int c;
+ tui_puts (s);
+}
- for (;;)
- {
- c = rl_read_key ();
- if (c == 'y' || c == 'Y' || c == ' ')
- return (1);
- if (c == 'n' || c == 'N' || c == RUBOUT)
- return (0);
- if (c == ABORT_CHAR)
- _rl_abort_internal ();
- beep ();
- }
+/* TUI version of displayer.flush. */
+
+static void
+tui_mld_flush (const struct match_list_displayer *displayer)
+{
+ wrefresh (TUI_CMD_WIN->handle.get ());
}
-/* A convenience function for displaying a list of strings in
- columnar format on readline's output stream. MATCHES is the list
- of strings, in argv format, LEN is the number of strings in MATCHES,
- and MAX is the length of the longest string in MATCHES.
+/* TUI version of displayer.erase_entire_line. */
- Comes from readline/complete.c and modified to write in
- the TUI command window using tui_putc/tui_puts. */
static void
-tui_rl_display_match_list (char **matches, int len, int max)
+tui_mld_erase_entire_line (const struct match_list_displayer *displayer)
{
- typedef int QSFUNC (const void *, const void *);
- extern int _rl_qsort_string_compare (const void *,
- const void *);
- extern int _rl_print_completions_horizontally;
-
- int count, limit, printed_len;
- int i, j, k, l;
- char *temp;
+ WINDOW *w = TUI_CMD_WIN->handle.get ();
+ int cur_y = getcury (w);
- /* Screen dimension correspond to the TUI command window. */
- int screenwidth = TUI_CMD_WIN->generic.width;
+ wmove (w, cur_y, 0);
+ wclrtoeol (w);
+ wmove (w, cur_y, 0);
+}
- /* If there are many items, then ask the user if she really wants to
- see them all. */
- if (len >= rl_completion_query_items)
- {
- char msg[256];
+/* TUI version of displayer.beep. */
- sprintf (msg, "\nDisplay all %d possibilities? (y or n)", len);
- tui_puts (msg);
- if (get_y_or_n () == 0)
- {
- tui_puts ("\n");
- return;
- }
- }
+static void
+tui_mld_beep (const struct match_list_displayer *displayer)
+{
+ beep ();
+}
- /* How many items of MAX length can we fit in the screen window? */
- max += 2;
- limit = screenwidth / max;
- if (limit != 1 && (limit * max == screenwidth))
- limit--;
+/* A wrapper for wgetch that enters nonl mode. We We normally want
+ curses' "nl" mode, but when reading from the user, we'd like to
+ differentiate between C-j and C-m, because some users bind these
+ keys differently in their .inputrc. So, put curses into nonl mode
+ just when reading from the user. See PR tui/20819. */
- /* Avoid a possible floating exception. If max > screenwidth, limit
- will be 0 and a divide-by-zero fault will result. */
- if (limit == 0)
- limit = 1;
+static int
+gdb_wgetch (WINDOW *win)
+{
+ nonl ();
+ int r = wgetch (win);
+ nl ();
+ return r;
+}
- /* How many iterations of the printing loop? */
- count = (len + (limit - 1)) / limit;
+/* Helper function for tui_mld_read_key.
+ This temporarily replaces tui_getc for use during tab-completion
+ match list display. */
- /* Watch out for special case. If LEN is less than LIMIT, then
- just do the inner printing loop.
- 0 < len <= limit implies count = 1. */
+static int
+tui_mld_getc (FILE *fp)
+{
+ WINDOW *w = TUI_CMD_WIN->handle.get ();
+ int c = gdb_wgetch (w);
- /* Sort the items if they are not already sorted. */
- if (rl_ignore_completion_duplicates == 0)
- qsort (matches + 1, len, sizeof (char *),
- (QSFUNC *)_rl_qsort_string_compare);
+ return c;
+}
- tui_putc ('\n');
+/* TUI version of displayer.read_key. */
- if (_rl_print_completions_horizontally == 0)
- {
- /* Print the sorted items, up-and-down alphabetically, like ls. */
- for (i = 1; i <= count; i++)
- {
- for (j = 0, l = i; j < limit; j++)
- {
- if (l > len || matches[l] == 0)
- break;
- else
- {
- temp = printable_part (matches[l]);
- printed_len = print_filename (temp, matches[l]);
+static int
+tui_mld_read_key (const struct match_list_displayer *displayer)
+{
+ rl_getc_func_t *prev = rl_getc_function;
+ int c;
- if (j + 1 < limit)
- for (k = 0; k < max - printed_len; k++)
- tui_putc (' ');
- }
- l += count;
- }
- tui_putc ('\n');
- }
- }
- else
- {
- /* Print the sorted items, across alphabetically, like ls -x. */
- for (i = 1; matches[i]; i++)
- {
- temp = printable_part (matches[i]);
- printed_len = print_filename (temp, matches[i]);
- /* Have we reached the end of this line? */
- if (matches[i+1])
- {
- if (i && (limit > 1) && (i % limit) == 0)
- tui_putc ('\n');
- else
- for (k = 0; k < max - printed_len; k++)
- tui_putc (' ');
- }
- }
- tui_putc ('\n');
- }
+ /* We can't use tui_getc as we need NEWLINE to not get emitted. */
+ rl_getc_function = tui_mld_getc;
+ c = rl_read_key ();
+ rl_getc_function = prev;
+ return c;
+}
+
+/* TUI version of rl_completion_display_matches_hook.
+ See gdb_display_match_list for a description of the arguments. */
+
+static void
+tui_rl_display_match_list (char **matches, int len, int max)
+{
+ struct match_list_displayer displayer;
+
+ rl_get_screen_size (&displayer.height, &displayer.width);
+ displayer.crlf = tui_mld_crlf;
+ displayer.putch = tui_mld_putch;
+ displayer.puts = tui_mld_puts;
+ displayer.flush = tui_mld_flush;
+ displayer.erase_entire_line = tui_mld_erase_entire_line;
+ displayer.beep = tui_mld_beep;
+ displayer.read_key = tui_mld_read_key;
+
+ gdb_display_match_list (matches, len, max, &displayer);
}
/* Setup the IO for curses or non-curses mode.
void
tui_setup_io (int mode)
{
- extern int readline_echoing_p;
-
+ extern int _rl_echoing_p;
+
if (mode)
{
/* Redirect readline to TUI. */
tui_old_rl_deprep_terminal = rl_deprep_term_function;
tui_old_rl_prep_terminal = rl_prep_term_function;
tui_old_rl_getc_function = rl_getc_function;
+ tui_old_rl_display_matches_hook = rl_completion_display_matches_hook;
tui_old_rl_outstream = rl_outstream;
- tui_old_readline_echoing_p = readline_echoing_p;
+ tui_old_rl_echoing_p = _rl_echoing_p;
rl_redisplay_function = tui_redisplay_readline;
rl_deprep_term_function = tui_deprep_terminal;
rl_prep_term_function = tui_prep_terminal;
rl_getc_function = tui_getc;
- readline_echoing_p = 0;
+ _rl_echoing_p = 0;
rl_outstream = tui_rl_outstream;
rl_prompt = 0;
rl_completion_display_matches_hook = tui_rl_display_match_list;
/* Keep track of previous gdb output. */
tui_old_stdout = gdb_stdout;
tui_old_stderr = gdb_stderr;
- tui_old_uiout = uiout;
+ tui_old_uiout = dynamic_cast<cli_ui_out *> (current_uiout);
+ gdb_assert (tui_old_uiout != nullptr);
/* Reconfigure gdb output. */
gdb_stdout = tui_stdout;
gdb_stderr = tui_stderr;
gdb_stdlog = gdb_stdout; /* for moment */
gdb_stdtarg = gdb_stderr; /* for moment */
- uiout = tui_out;
+ gdb_stdtargerr = gdb_stderr; /* for moment */
+ current_uiout = tui_out;
/* Save tty for SIGCONT. */
savetty ();
gdb_stderr = tui_old_stderr;
gdb_stdlog = gdb_stdout; /* for moment */
gdb_stdtarg = gdb_stderr; /* for moment */
- uiout = tui_old_uiout;
+ gdb_stdtargerr = gdb_stderr; /* for moment */
+ current_uiout = tui_old_uiout;
/* Restore readline. */
rl_redisplay_function = tui_old_rl_redisplay_function;
rl_deprep_term_function = tui_old_rl_deprep_terminal;
rl_prep_term_function = tui_old_rl_prep_terminal;
rl_getc_function = tui_old_rl_getc_function;
+ rl_completion_display_matches_hook = tui_old_rl_display_matches_hook;
rl_outstream = tui_old_rl_outstream;
- rl_completion_display_matches_hook = 0;
- readline_echoing_p = tui_old_readline_echoing_p;
+ _rl_echoing_p = tui_old_rl_echoing_p;
rl_already_prompted = 0;
/* Save tty for SIGCONT. */
savetty ();
+
+ /* Clean up color information. */
+ last_color_pair = -1;
+ last_style = ui_file_style ();
+ color_map.clear ();
+ color_pair_map.clear ();
}
}
/* Force a refresh of the screen. */
tui_refresh_all_win ();
-
- /* Update cursor position on the screen. */
- wmove (TUI_CMD_WIN->generic.handle,
- TUI_CMD_WIN->detail.command_info.start_line,
- TUI_CMD_WIN->detail.command_info.curch);
- wrefresh (TUI_CMD_WIN->generic.handle);
}
signal (sig, tui_cont_sig);
}
#endif
/* Create tui output streams. */
- tui_stdout = tui_fileopen (stdout);
- tui_stderr = tui_fileopen (stderr);
+ tui_stdout = new tui_file (stdout);
+ tui_stderr = new tui_file (stderr);
tui_out = tui_out_new (tui_stdout);
- /* Create the default UI. It is not created because we installed a
- deprecated_init_ui_hook. */
- tui_old_uiout = uiout = cli_out_new (gdb_stdout);
+ /* Create the default UI. */
+ tui_old_uiout = cli_out_new (gdb_stdout);
#ifdef TUI_USE_PIPE_FOR_READLINE
/* Temporary solution for readline writing to stdout: redirect
readline output in a pipe, read that pipe and output the content
in the curses command window. */
- if (pipe (tui_readline_pipe) != 0)
- {
- fprintf_unfiltered (gdb_stderr, "Cannot create pipe for readline");
- exit (1);
- }
+ if (gdb_pipe_cloexec (tui_readline_pipe) != 0)
+ error (_("Cannot create pipe for readline"));
+
tui_rl_outstream = fdopen (tui_readline_pipe[1], "w");
if (tui_rl_outstream == 0)
- {
- fprintf_unfiltered (gdb_stderr, "Cannot redirect readline output");
- exit (1);
- }
- setvbuf (tui_rl_outstream, (char*) NULL, _IOLBF, 0);
+ error (_("Cannot redirect readline output"));
+
+ setvbuf (tui_rl_outstream, NULL, _IOLBF, 0);
#ifdef O_NONBLOCK
(void) fcntl (tui_readline_pipe[0], F_SETFL, O_NONBLOCK);
#else
tui_rl_outstream = stdout;
#endif
+
+#ifdef __MINGW32__
+ /* MS-Windows port of ncurses doesn't support default foreground and
+ background colors, so we must record the default colors at startup. */
+ HANDLE hstdout = (HANDLE)_get_osfhandle (fileno (stdout));
+ DWORD cmode;
+ CONSOLE_SCREEN_BUFFER_INFO csbi;
+
+ if (hstdout != INVALID_HANDLE_VALUE
+ && GetConsoleMode (hstdout, &cmode) != 0
+ && GetConsoleScreenBufferInfo (hstdout, &csbi))
+ ncurses_norm_attr = csbi.wAttributes;
+#endif
}
-/* Get a character from the command window. This is called from the
- readline package. */
-int
-tui_getc (FILE *fp)
+/* Dispatch the correct tui function based upon the control
+ character. */
+static unsigned int
+tui_dispatch_ctrl_char (unsigned int ch)
+{
+ struct tui_win_info *win_info = tui_win_with_focus ();
+
+ /* Handle the CTRL-L refresh for each window. */
+ if (ch == '\f')
+ tui_refresh_all_win ();
+
+ /* If no window has the focus, or if the focus window can't scroll,
+ just pass the character through. */
+ if (win_info == NULL || !win_info->can_scroll ())
+ return ch;
+
+ switch (ch)
+ {
+ case KEY_NPAGE:
+ win_info->forward_scroll (0);
+ break;
+ case KEY_PPAGE:
+ win_info->backward_scroll (0);
+ break;
+ case KEY_DOWN:
+ case KEY_SF:
+ win_info->forward_scroll (1);
+ break;
+ case KEY_UP:
+ case KEY_SR:
+ win_info->backward_scroll (1);
+ break;
+ case KEY_RIGHT:
+ win_info->left_scroll (1);
+ break;
+ case KEY_LEFT:
+ win_info->right_scroll (1);
+ break;
+ case '\f':
+ break;
+ default:
+ /* We didn't recognize the character as a control character, so pass it
+ through. */
+ return ch;
+ }
+
+ /* We intercepted the control character, so return 0 (which readline
+ will interpret as a no-op). */
+ return 0;
+}
+
+/* Main worker for tui_getc. Get a character from the command window.
+ This is called from the readline package, but wrapped in a
+ try/catch by tui_getc. */
+
+static int
+tui_getc_1 (FILE *fp)
{
int ch;
WINDOW *w;
- w = TUI_CMD_WIN->generic.handle;
+ w = TUI_CMD_WIN->handle.get ();
#ifdef TUI_USE_PIPE_FOR_READLINE
/* Flush readline output. */
- tui_readline_output (GDB_READABLE, 0);
+ tui_readline_output (0, 0);
#endif
- ch = wgetch (w);
- ch = tui_handle_resize_during_io (ch);
+ ch = gdb_wgetch (w);
/* The \n must be echoed because it will not be printed by
readline. */
- if (ch == '\n')
+ if (ch == '\n' || ch == '\r')
{
/* When hitting return with an empty input, gdb executes the last
command. If we emit a newline, this fills up the command window
with empty lines with gdb prompt at beginning. Instead of that,
stay on the same line but provide a visual effect to show the
user we recognized the command. */
- if (rl_end == 0)
+ if (rl_end == 0 && !gdb_in_secondary_prompt_p (current_ui))
{
- wmove (w, TUI_CMD_WIN->detail.command_info.cur_line, 0);
+ wmove (w, getcury (w), 0);
/* Clear the line. This will blink the gdb prompt since
it will be redrawn at the same line. */
}
else
{
- wmove (w, TUI_CMD_WIN->detail.command_info.cur_line,
- TUI_CMD_WIN->detail.command_info.curch);
- waddch (w, ch);
+ /* Move cursor to the end of the command line before emitting the
+ newline. We need to do so because when ncurses outputs a newline
+ it truncates any text that appears past the end of the cursor. */
+ int px, py;
+ getyx (w, py, px);
+ px += rl_end - rl_point;
+ py += px / TUI_CMD_WIN->width;
+ px %= TUI_CMD_WIN->width;
+ wmove (w, py, px);
+ tui_putc ('\n');
}
}
- if (key_is_command_char (ch))
- { /* Handle prev/next/up/down here. */
- ch = tui_dispatch_ctrl_char (ch);
- }
+ /* Handle prev/next/up/down here. */
+ ch = tui_dispatch_ctrl_char (ch);
- if (ch == '\n' || ch == '\r' || ch == '\f')
- TUI_CMD_WIN->detail.command_info.curch = 0;
if (ch == KEY_BACKSPACE)
return '\b';
-
+
+ if (current_ui->command_editing && key_is_start_sequence (ch))
+ {
+ int ch_pending;
+
+ nodelay (w, TRUE);
+ ch_pending = gdb_wgetch (w);
+ nodelay (w, FALSE);
+
+ /* If we have pending input following a start sequence, call the stdin
+ event handler again because ncurses may have already read and stored
+ the input into its internal buffer, meaning that we won't get an stdin
+ event for it. If we don't compensate for this missed stdin event, key
+ sequences as Alt_F (^[f) will not behave promptly.
+
+ (We only compensates for the missed 2nd byte of a key sequence because
+ 2-byte sequences are by far the most commonly used. ncurses may have
+ buffered a larger, 3+-byte key sequence though it remains to be seen
+ whether it is useful to compensate for all the bytes of such
+ sequences.) */
+ if (ch_pending != ERR)
+ {
+ ungetch (ch_pending);
+ call_stdin_event_handler_again_p = 1;
+ }
+ }
+
return ch;
}
+/* Get a character from the command window. This is called from the
+ readline package. */
-/* Cleanup when a resize has occured.
- Returns the character that must be processed. */
-static unsigned int
-tui_handle_resize_during_io (unsigned int original_ch)
+static int
+tui_getc (FILE *fp)
{
- if (tui_win_resized ())
+ try
{
- tui_refresh_all_win ();
- dont_repeat ();
- tui_set_win_resized_to (FALSE);
- return '\n';
+ return tui_getc_1 (fp);
}
- else
- return original_ch;
+ catch (const gdb_exception &ex)
+ {
+ /* Just in case, don't ever let an exception escape to readline.
+ This shouldn't ever happen, but if it does, print the
+ exception instead of just crashing GDB. */
+ exception_print (gdb_stderr, ex);
+
+ /* If we threw an exception, it's because we recognized the
+ character. */
+ return 0;
+ }
+}
+
+/* See tui-io.h. */
+
+gdb::unique_xmalloc_ptr<char>
+tui_expand_tabs (const char *string)
+{
+ int n_adjust, ncol;
+ const char *s;
+ char *ret, *q;
+
+ /* 1. How many additional characters do we need? */
+ for (ncol = 0, n_adjust = 0, s = string; s; )
+ {
+ s = strpbrk (s, "\t");
+ if (s)
+ {
+ ncol += (s - string) + n_adjust;
+ /* Adjustment for the next tab stop, minus one for the TAB
+ we replace with spaces. */
+ n_adjust += 8 - (ncol % 8) - 1;
+ s++;
+ }
+ }
+
+ /* Allocate the copy. */
+ ret = q = (char *) xmalloc (strlen (string) + n_adjust + 1);
+
+ /* 2. Copy the original string while replacing TABs with spaces. */
+ for (ncol = 0, s = string; s; )
+ {
+ const char *s1 = strpbrk (s, "\t");
+ if (s1)
+ {
+ if (s1 > s)
+ {
+ strncpy (q, s, s1 - s);
+ q += s1 - s;
+ ncol += s1 - s;
+ }
+ do {
+ *q++ = ' ';
+ ncol++;
+ } while ((ncol % 8) != 0);
+ s1++;
+ }
+ else
+ strcpy (q, s);
+ s = s1;
+ }
+
+ return gdb::unique_xmalloc_ptr<char> (ret);
}
projects / deliverable / binutils-gdb.git / blobdiff