/* General utility routines for GDB, the GNU debugger.
- Copyright (C) 1986-2015 Free Software Foundation, Inc.
+ Copyright (C) 1986-2016 Free Software Foundation, Inc.
This file is part of GDB.
int job_control;
-/* Nonzero means quit immediately if Control-C is typed now, rather
- than waiting until QUIT is executed. Be careful in setting this;
- code which executes with immediate_quit set has to be very careful
- about being able to deal with being interrupted at any time. It is
- almost always better to use QUIT; the only exception I can think of
- is being able to quit out of a system call (using EINTR loses if
- the SIGINT happens between the previous QUIT and the system call).
- To immediately quit in the case in which a SIGINT happens between
- the previous QUIT and setting immediate_quit (desirable anytime we
- expect to block), call QUIT after setting immediate_quit. */
-
-int immediate_quit;
-
/* Nonzero means that strings with character values >0x7F should be printed
as octal escapes. Zero means just print the value (e.g. it's an
international character, and the terminal or window can cope.) */
static void
do_bfd_close_cleanup (void *arg)
{
- gdb_bfd_unref (arg);
+ gdb_bfd_unref ((bfd *) arg);
}
struct cleanup *
static void
do_fclose_cleanup (void *arg)
{
- FILE *file = arg;
+ FILE *file = (FILE *) arg;
fclose (file);
}
static void
do_obstack_free (void *arg)
{
- struct obstack *ob = arg;
+ struct obstack *ob = (struct obstack *) arg;
obstack_free (ob, NULL);
}
static void
do_ui_file_delete (void *arg)
{
- ui_file_delete (arg);
+ ui_file_delete ((struct ui_file *) arg);
}
struct cleanup *
static void
do_ui_out_redirect_pop (void *arg)
{
- struct ui_out *uiout = arg;
+ struct ui_out *uiout = (struct ui_out *) arg;
if (ui_out_redirect (uiout, NULL) < 0)
warning (_("Cannot restore redirection of the current output protocol"));
static void
do_free_section_addr_info (void *arg)
{
- free_section_addr_info (arg);
+ free_section_addr_info ((struct section_addr_info *) arg);
}
struct cleanup *
static void
restore_integer (void *p)
{
- struct restore_integer_closure *closure = p;
+ struct restore_integer_closure *closure
+ = (struct restore_integer_closure *) p;
*(closure->variable) = closure->value;
}
struct cleanup *
make_cleanup_restore_integer (int *variable)
{
- struct restore_integer_closure *c =
- xmalloc (sizeof (struct restore_integer_closure));
+ struct restore_integer_closure *c = XNEW (struct restore_integer_closure);
c->variable = variable;
c->value = *variable;
static void
do_unpush_target (void *arg)
{
- struct target_ops *ops = arg;
+ struct target_ops *ops = (struct target_ops *) arg;
unpush_target (ops);
}
static void
do_htab_delete_cleanup (void *htab_voidp)
{
- htab_t htab = htab_voidp;
+ htab_t htab = (htab_t) htab_voidp;
htab_delete (htab);
}
return make_cleanup (do_htab_delete_cleanup, htab);
}
+struct restore_ui_out_closure
+{
+ struct ui_out **variable;
+ struct ui_out *value;
+};
+
struct restore_ui_file_closure
{
struct ui_file **variable;
static void
do_restore_ui_file (void *p)
{
- struct restore_ui_file_closure *closure = p;
+ struct restore_ui_file_closure *closure
+ = (struct restore_ui_file_closure *) p;
*(closure->variable) = closure->value;
}
static void
do_value_free (void *value)
{
- value_free (value);
+ value_free ((struct value *) value);
}
/* Free VALUE. */
static void
do_free_so (void *arg)
{
- struct so_list *so = arg;
+ struct so_list *so = (struct so_list *) arg;
free_so (so);
}
void
free_current_contents (void *ptr)
{
- void **location = ptr;
+ void **location = (void **) ptr;
if (location == NULL)
internal_error (__FILE__, __LINE__,
(*deprecated_warning_hook) (string, args);
else
{
+ struct cleanup *old_chain = make_cleanup (null_cleanup, NULL);
+
if (target_supports_terminal_ours ())
- target_terminal_ours ();
+ {
+ make_cleanup_restore_target_terminal ();
+ target_terminal_ours_for_output ();
+ }
if (filtered_printing_initialized ())
wrap_here (""); /* Force out any buffered output. */
gdb_flush (gdb_stdout);
fputs_unfiltered (warning_pre_print, gdb_stderr);
vfprintf_unfiltered (gdb_stderr, string, args);
fprintf_unfiltered (gdb_stderr, "\n");
+
+ do_cleanups (old_chain);
}
}
/* Try to get the message out and at the start of a new line. */
if (target_supports_terminal_ours ())
- target_terminal_ours ();
+ {
+ make_cleanup_restore_target_terminal ();
+ target_terminal_ours_for_output ();
+ }
if (filtered_printing_initialized ())
begin_line ();
char *set_doc;
char *show_doc;
- set_cmd_list = xmalloc (sizeof (*set_cmd_list));
- show_cmd_list = xmalloc (sizeof (*set_cmd_list));
+ set_cmd_list = XNEW (struct cmd_list_element *);
+ show_cmd_list = XNEW (struct cmd_list_element *);
*set_cmd_list = NULL;
*show_cmd_list = NULL;
void
quit (void)
{
+ struct ui *ui = current_ui;
+
if (sync_quit_force_run)
{
sync_quit_force_run = 0;
- quit_force (NULL, stdin == instream);
+ quit_force (NULL, 0);
}
#ifdef __MSDOS__
#endif
}
+/* See defs.h. */
+
+void
+maybe_quit (void)
+{
+ if (sync_quit_force_run)
+ quit ();
+
+ quit_handler ();
+
+ if (deprecated_interactive_hook)
+ deprecated_interactive_hook ();
+}
+
\f
/* Called when a memory allocation fails, with the number of bytes of
memory requested in SIZE. */
/* Print a host address. */
void
-gdb_print_host_address (const void *addr, struct ui_file *stream)
+gdb_print_host_address_1 (const void *addr, struct ui_file *stream)
{
fprintf_filtered (stream, "%s", host_address_to_string (addr));
}
char *
make_hex_string (const gdb_byte *data, size_t length)
{
- char *result = xmalloc (length * 2 + 1);
+ char *result = (char *) xmalloc (length * 2 + 1);
char *p;
size_t i;
static void
do_regfree_cleanup (void *r)
{
- regfree (r);
+ regfree ((regex_t *) r);
}
/* Create a new cleanup that frees the compiled regular expression R. */
get_regcomp_error (int code, regex_t *rx)
{
size_t length = regerror (code, rx, NULL, 0);
- char *result = xmalloc (length);
+ char *result = (char *) xmalloc (length);
regerror (code, rx, result, length);
return result;
return make_regfree_cleanup (pattern);
}
+/* A cleanup that simply calls ui_unregister_input_event_handler. */
+
+static void
+ui_unregister_input_event_handler_cleanup (void *ui)
+{
+ ui_unregister_input_event_handler ((struct ui *) ui);
+}
+
+/* Set up to handle input. */
+
+static struct cleanup *
+prepare_to_handle_input (void)
+{
+ struct cleanup *old_chain;
+
+ old_chain = make_cleanup_restore_target_terminal ();
+ target_terminal_ours ();
+
+ ui_register_input_event_handler (current_ui);
+ if (current_ui->prompt_state == PROMPT_BLOCKED)
+ make_cleanup (ui_unregister_input_event_handler_cleanup, current_ui);
+
+ make_cleanup_override_quit_handler (default_quit_handler);
+
+ return old_chain;
+}
+
\f
/* This function supports the query, nquery, and yquery functions.
/* Used to add duration we waited for user to respond to
prompt_for_continue_wait_time. */
struct timeval prompt_started, prompt_ended, prompt_delta;
+ struct cleanup *old_chain;
/* Set up according to which answer is the default. */
if (defchar == '\0')
question we're asking, and then answer the default automatically. This
way, important error messages don't get lost when talking to GDB
over a pipe. */
- if (! input_from_terminal_p ())
+ if (current_ui->instream != current_ui->stdin_stream
+ || !input_interactive_p (current_ui))
{
+ old_chain = make_cleanup_restore_target_terminal ();
+
+ target_terminal_ours_for_output ();
wrap_here ("");
vfprintf_filtered (gdb_stdout, ctlstr, args);
y_string, n_string, def_answer);
gdb_flush (gdb_stdout);
+ do_cleanups (old_chain);
return def_value;
}
if (deprecated_query_hook)
{
- return deprecated_query_hook (ctlstr, args);
+ int res;
+
+ old_chain = make_cleanup_restore_target_terminal ();
+ res = deprecated_query_hook (ctlstr, args);
+ do_cleanups (old_chain);
+ return res;
}
/* Format the question outside of the loop, to avoid reusing args. */
question = xstrvprintf (ctlstr, args);
+ old_chain = make_cleanup (xfree, question);
prompt = xstrprintf (_("%s%s(%s or %s) %s"),
annotation_level > 1 ? "\n\032\032pre-query\n" : "",
question, y_string, n_string,
annotation_level > 1 ? "\n\032\032query\n" : "");
- xfree (question);
+ make_cleanup (xfree, prompt);
/* Used for calculating time spend waiting for user. */
gettimeofday (&prompt_started, NULL);
+ prepare_to_handle_input ();
+
while (1)
{
char *response, answer;
timeval_add (&prompt_for_continue_wait_time,
&prompt_for_continue_wait_time, &prompt_delta);
- xfree (prompt);
if (annotation_level > 1)
printf_filtered (("\n\032\032post-query\n"));
+ do_cleanups (old_chain);
return retval;
}
\f
\f
/* Print the character C on STREAM as part of the contents of a literal
string whose delimiter is QUOTER. Note that this routine should only
- be call for printing things which are independent of the language
+ be called for printing things which are independent of the language
of the program being debugged.
printchar will normally escape backslashes and instances of QUOTER. If
Only try to use tgetnum function if rl_get_screen_size
did not return a useful value. */
if (((rows <= 0) && (tgetnum ("li") < 0))
- /* Also disable paging if inside EMACS. */
- || getenv ("EMACS"))
+ /* Also disable paging if inside Emacs. $EMACS was used
+ before Emacs v25.1, $INSIDE_EMACS is used since then. */
+ || getenv ("EMACS") || getenv ("INSIDE_EMACS"))
{
/* The number of lines per page is not mentioned in the terminal
description or EMACS evironment variable is set. This probably
}
/* Wait, so the user can read what's on the screen. Prompt the user
- to continue by pressing RETURN. */
+ to continue by pressing RETURN. 'q' is also provided because
+ telling users what to do in the prompt is more user-friendly than
+ expecting them to think of Ctrl-C/SIGINT. */
static void
prompt_for_continue (void)
/* Used to add duration we waited for user to respond to
prompt_for_continue_wait_time. */
struct timeval prompt_started, prompt_ended, prompt_delta;
+ struct cleanup *old_chain = make_cleanup (null_cleanup, NULL);
gettimeofday (&prompt_started, NULL);
if (annotation_level > 1)
strcat (cont_prompt, "\n\032\032prompt-for-continue\n");
- /* We must do this *before* we call gdb_readline, else it will eventually
- call us -- thinking that we're trying to print beyond the end of the
- screen. */
+ /* We must do this *before* we call gdb_readline_wrapper, else it
+ will eventually call us -- thinking that we're trying to print
+ beyond the end of the screen. */
reinitialize_more_filter ();
- immediate_quit++;
- QUIT;
-
- /* We'll need to handle input. */
- target_terminal_ours ();
+ prepare_to_handle_input ();
- /* On a real operating system, the user can quit with SIGINT.
- But not on GO32.
-
- 'q' is provided on all systems so users don't have to change habits
- from system to system, and because telling them what to do in
- the prompt is more user-friendly than expecting them to think of
- SIGINT. */
- /* Call readline, not gdb_readline, because GO32 readline handles control-C
- whereas control-C to gdb_readline will cause the user to get dumped
- out to DOS. */
+ /* Call gdb_readline_wrapper, not readline, in order to keep an
+ event loop running. */
ignore = gdb_readline_wrapper (cont_prompt);
+ make_cleanup (xfree, ignore);
/* Add time spend in this routine to prompt_for_continue_wait_time. */
gettimeofday (&prompt_ended, NULL);
if (annotation_level > 1)
printf_unfiltered (("\n\032\032post-prompt-for-continue\n"));
- if (ignore)
+ if (ignore != NULL)
{
char *p = ignore;
while (*p == ' ' || *p == '\t')
++p;
if (p[0] == 'q')
- quit ();
- xfree (ignore);
+ /* Do not call quit here; there is no possibility of SIGINT. */
+ throw_quit ("Quit");
}
- immediate_quit--;
/* Now we have to do this again, so that GDB will know that it doesn't
need to save the ---Type <return>--- line at the top of the screen. */
reinitialize_more_filter ();
dont_repeat (); /* Forget prev cmd -- CR won't repeat it. */
+
+ do_cleanups (old_chain);
}
/* Initalize timer to keep track of how long we waited for the user. */
if (right)
spaces += width - stringlen;
- spacebuf = alloca (spaces + 1);
+ spacebuf = (char *) alloca (spaces + 1);
spacebuf[spaces] = '\0';
while (spaces--)
spacebuf[spaces] = ' ';
hashval_t
core_addr_hash (const void *ap)
{
- const CORE_ADDR *addrp = ap;
+ const CORE_ADDR *addrp = (const CORE_ADDR *) ap;
return *addrp;
}
int
core_addr_eq (const void *ap, const void *bp)
{
- const CORE_ADDR *addr_ap = ap;
- const CORE_ADDR *addr_bp = bp;
+ const CORE_ADDR *addr_ap = (const CORE_ADDR *) ap;
+ const CORE_ADDR *addr_bp = (const CORE_ADDR *) bp;
return *addr_ap == *addr_bp;
}
if (base_name == filename)
return xstrdup (filename);
- dir_name = alloca ((size_t) (base_name - filename + 2));
+ dir_name = (char *) alloca ((size_t) (base_name - filename + 2));
/* Allocate enough space to store the dir_name + plus one extra
character sometimes needed under Windows (see below), and
then the closing \000 character. */
if (base == filename)
return NULL;
- dirname = xmalloc (base - filename + 2);
+ dirname = (char *) xmalloc (base - filename + 2);
memcpy (dirname, filename, base - filename);
/* On DOS based file systems, convert "d:foo" to "d:.", so that we
+ strlen (AMBIGUOUS_MESS2);
for (p = matching; *p; p++)
ret_len += strlen (*p) + 1;
- ret = xmalloc (ret_len + 1);
+ ret = (char *) xmalloc (ret_len + 1);
retp = ret;
make_cleanup (xfree, ret);
static void
do_free_char_ptr_vec (void *arg)
{
- VEC (char_ptr) *char_ptr_vec = arg;
+ VEC (char_ptr) *char_ptr_vec = (VEC (char_ptr) *) arg;
free_char_ptr_vec (char_ptr_vec);
}
{
char *string_new;
- string_new = xrealloc (string, (strlen (string) + to_len + 1));
+ string_new
+ = (char *) xrealloc (string, (strlen (string) + to_len + 1));
/* Relocate the current S pointer. */
s = s - string + string_new;
sa.sa_flags = 0;
sigaction (SIGALRM, &sa, &old_sa);
#else
- void (*ofunc) ();
+ sighandler_t ofunc;
- ofunc = (void (*)()) signal (SIGALRM, sigalrm_handler);
+ ofunc = signal (SIGALRM, sigalrm_handler);
#endif
alarm (timeout);
/* Replace '\' by '/' in both strings. */
- pattern_slash = alloca (strlen (pattern) + 1);
+ pattern_slash = (char *) alloca (strlen (pattern) + 1);
strcpy (pattern_slash, pattern);
pattern = pattern_slash;
for (; *pattern_slash != 0; pattern_slash++)
if (IS_DIR_SEPARATOR (*pattern_slash))
*pattern_slash = '/';
- string_slash = alloca (strlen (string) + 1);
+ string_slash = (char *) alloca (strlen (string) + 1);
strcpy (string_slash, string);
string = string_slash;
for (; *string_slash != 0; string_slash++)
return fnmatch (pattern, string, flags);
}
+/* Return the number of path elements in PATH.
+ / = 1
+ /foo = 2
+ /foo/ = 2
+ foo/bar = 2
+ foo/ = 1 */
+
+int
+count_path_elements (const char *path)
+{
+ int count = 0;
+ const char *p = path;
+
+ if (HAS_DRIVE_SPEC (p))
+ {
+ p = STRIP_DRIVE_SPEC (p);
+ ++count;
+ }
+
+ while (*p != '\0')
+ {
+ if (IS_DIR_SEPARATOR (*p))
+ ++count;
+ ++p;
+ }
+
+ /* Backup one if last character is /, unless it's the only one. */
+ if (p > path + 1 && IS_DIR_SEPARATOR (p[-1]))
+ --count;
+
+ /* Add one for the file name, if present. */
+ if (p > path && !IS_DIR_SEPARATOR (p[-1]))
+ ++count;
+
+ return count;
+}
+
+/* Remove N leading path elements from PATH.
+ N must be non-negative.
+ If PATH has more than N path elements then return NULL.
+ If PATH has exactly N path elements then return "".
+ See count_path_elements for a description of how we do the counting. */
+
+const char *
+strip_leading_path_elements (const char *path, int n)
+{
+ int i = 0;
+ const char *p = path;
+
+ gdb_assert (n >= 0);
+
+ if (n == 0)
+ return p;
+
+ if (HAS_DRIVE_SPEC (p))
+ {
+ p = STRIP_DRIVE_SPEC (p);
+ ++i;
+ }
+
+ while (i < n)
+ {
+ while (*p != '\0' && !IS_DIR_SEPARATOR (*p))
+ ++p;
+ if (*p == '\0')
+ {
+ if (i + 1 == n)
+ return "";
+ return NULL;
+ }
+ ++p;
+ ++i;
+ }
+
+ return p;
+}
+
/* Provide a prototype to silence -Wmissing-prototypes. */
extern initialize_file_ftype _initialize_utils;
projects / deliverable / binutils-gdb.git / blobdiff