/* General utility routines for GDB, the GNU debugger.
Copyright (C) 1986, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
- 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
- Free Software Foundation, Inc.
+ 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008,
+ 2009, 2010, 2011 Free Software Foundation, Inc.
This file is part of GDB.
#include "gdb_string.h"
#include "event-top.h"
#include "exceptions.h"
+#include "gdbthread.h"
+#ifdef HAVE_SYS_RESOURCE_H
+#include <sys/resource.h>
+#endif /* HAVE_SYS_RESOURCE_H */
#ifdef TUI
#include "tui/tui.h" /* For tui_get_command_dimension. */
#include <pc.h>
#endif
-/* SunOS's curses.h has a '#define reg register' in it. Thank you Sun. */
+/* SunOS's curses.h has a '#define reg register' in it. Thank you Sun. */
#ifdef reg
#undef reg
#endif
#include "gdb_obstack.h"
#include "gdbcore.h"
#include "top.h"
+#include "main.h"
#include "inferior.h" /* for signed_pointer_to_address */
#include <sys/time.h>
#include <time.h>
+#include "gdb_usleep.h"
+#include "interps.h"
+#include "gdb_regex.h"
+
#if !HAVE_DECL_MALLOC
-extern PTR malloc (); /* OK: PTR */
+extern PTR malloc (); /* ARI: PTR */
#endif
#if !HAVE_DECL_REALLOC
-extern PTR realloc (); /* OK: PTR */
+extern PTR realloc (); /* ARI: PTR */
#endif
#if !HAVE_DECL_FREE
extern void free ();
/* Prototypes for local functions */
static void vfprintf_maybe_filtered (struct ui_file *, const char *,
- va_list, int) ATTR_FORMAT (printf, 2, 0);
+ va_list, int) ATTRIBUTE_PRINTF (2, 0);
static void fputs_maybe_filtered (const char *, struct ui_file *, int);
static struct cleanup *cleanup_chain; /* cleaned up after a failed command */
static struct cleanup *final_cleanup_chain; /* cleaned up when gdb exits */
-/* Pointer to what is left to do for an execution command after the
- target stops. Used only in asynchronous mode, by targets that
- support async execution. The finish and until commands use it. So
- does the target extended-remote command. */
-struct continuation *cmd_continuation;
-struct continuation *intermediate_continuation;
-
-/* Nonzero if we have job control. */
+/* Nonzero if we have job control. */
int job_control;
show_demangle (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
- fprintf_filtered (file, _("\
-Demangling of encoded C++/ObjC names when displaying symbols is %s.\n"),
+ fprintf_filtered (file,
+ _("Demangling of encoded C++/ObjC names "
+ "when displaying symbols is %s.\n"),
value);
}
show_asm_demangle (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
- fprintf_filtered (file, _("\
-Demangling of C++/ObjC names in disassembly listings is %s.\n"),
+ fprintf_filtered (file,
+ _("Demangling of C++/ObjC names in "
+ "disassembly listings is %s.\n"),
value);
}
show_sevenbit_strings (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
- fprintf_filtered (file, _("\
-Printing of 8-bit characters in strings as \\nnn is %s.\n"),
+ fprintf_filtered (file, _("Printing of 8-bit characters "
+ "in strings as \\nnn is %s.\n"),
value);
}
return make_my_cleanup (&cleanup_chain, function, arg);
}
+struct cleanup *
+make_cleanup_dtor (make_cleanup_ftype *function, void *arg,
+ void (*dtor) (void *))
+{
+ return make_my_cleanup2 (&cleanup_chain,
+ function, arg, dtor);
+}
+
struct cleanup *
make_final_cleanup (make_cleanup_ftype *function, void *arg)
{
do_close_cleanup (void *arg)
{
int *fd = arg;
+
close (*fd);
- xfree (fd);
}
struct cleanup *
make_cleanup_close (int fd)
{
int *saved_fd = xmalloc (sizeof (fd));
+
*saved_fd = fd;
- return make_cleanup (do_close_cleanup, saved_fd);
+ return make_cleanup_dtor (do_close_cleanup, saved_fd, xfree);
+}
+
+/* Helper function which does the work for make_cleanup_fclose. */
+
+static void
+do_fclose_cleanup (void *arg)
+{
+ FILE *file = arg;
+
+ fclose (file);
+}
+
+/* Return a new cleanup that closes FILE. */
+
+struct cleanup *
+make_cleanup_fclose (FILE *file)
+{
+ return make_cleanup (do_fclose_cleanup, file);
+}
+
+/* Helper function which does the work for make_cleanup_obstack_free. */
+
+static void
+do_obstack_free (void *arg)
+{
+ struct obstack *ob = arg;
+
+ obstack_free (ob, NULL);
+}
+
+/* Return a new cleanup that frees OBSTACK. */
+
+struct cleanup *
+make_cleanup_obstack_free (struct obstack *obstack)
+{
+ return make_cleanup (do_obstack_free, obstack);
}
static void
return make_my_cleanup (&cleanup_chain, do_ui_file_delete, arg);
}
+/* Helper function for make_cleanup_ui_out_redirect_pop. */
+
+static void
+do_ui_out_redirect_pop (void *arg)
+{
+ struct ui_out *uiout = arg;
+
+ if (ui_out_redirect (uiout, NULL) < 0)
+ warning (_("Cannot restore redirection of the current output protocol"));
+}
+
+/* Return a new cleanup that pops the last redirection by ui_out_redirect
+ with NULL parameter. */
+
+struct cleanup *
+make_cleanup_ui_out_redirect_pop (struct ui_out *uiout)
+{
+ return make_my_cleanup (&cleanup_chain, do_ui_out_redirect_pop, uiout);
+}
+
static void
do_free_section_addr_info (void *arg)
{
return make_my_cleanup (&cleanup_chain, do_free_section_addr_info, addrs);
}
+struct restore_integer_closure
+{
+ int *variable;
+ int value;
+};
+
+static void
+restore_integer (void *p)
+{
+ struct restore_integer_closure *closure = p;
+
+ *(closure->variable) = closure->value;
+}
+
+/* Remember the current value of *VARIABLE and make it restored when
+ the cleanup is run. */
struct cleanup *
-make_my_cleanup (struct cleanup **pmy_chain, make_cleanup_ftype *function,
- void *arg)
+make_cleanup_restore_integer (int *variable)
+{
+ struct restore_integer_closure *c =
+ xmalloc (sizeof (struct restore_integer_closure));
+
+ c->variable = variable;
+ c->value = *variable;
+
+ return make_my_cleanup2 (&cleanup_chain, restore_integer, (void *)c,
+ xfree);
+}
+
+/* Remember the current value of *VARIABLE and make it restored when
+ the cleanup is run. */
+
+struct cleanup *
+make_cleanup_restore_uinteger (unsigned int *variable)
+{
+ return make_cleanup_restore_integer ((int *) variable);
+}
+
+/* Helper for make_cleanup_unpush_target. */
+
+static void
+do_unpush_target (void *arg)
+{
+ struct target_ops *ops = arg;
+
+ unpush_target (ops);
+}
+
+/* Return a new cleanup that unpushes OPS. */
+
+struct cleanup *
+make_cleanup_unpush_target (struct target_ops *ops)
+{
+ return make_my_cleanup (&cleanup_chain, do_unpush_target, ops);
+}
+
+struct restore_ui_file_closure
+{
+ struct ui_file **variable;
+ struct ui_file *value;
+};
+
+static void
+do_restore_ui_file (void *p)
+{
+ struct restore_ui_file_closure *closure = p;
+
+ *(closure->variable) = closure->value;
+}
+
+/* Remember the current value of *VARIABLE and make it restored when
+ the cleanup is run. */
+
+struct cleanup *
+make_cleanup_restore_ui_file (struct ui_file **variable)
+{
+ struct restore_ui_file_closure *c = XNEW (struct restore_ui_file_closure);
+
+ c->variable = variable;
+ c->value = *variable;
+
+ return make_cleanup_dtor (do_restore_ui_file, (void *) c, xfree);
+}
+
+struct cleanup *
+make_my_cleanup2 (struct cleanup **pmy_chain, make_cleanup_ftype *function,
+ void *arg, void (*free_arg) (void *))
{
struct cleanup *new
= (struct cleanup *) xmalloc (sizeof (struct cleanup));
new->next = *pmy_chain;
new->function = function;
+ new->free_arg = free_arg;
new->arg = arg;
*pmy_chain = new;
return old_chain;
}
+struct cleanup *
+make_my_cleanup (struct cleanup **pmy_chain, make_cleanup_ftype *function,
+ void *arg)
+{
+ return make_my_cleanup2 (pmy_chain, function, arg, NULL);
+}
+
/* Discard cleanups and do the actions they describe
until we get back to the point OLD_CHAIN in the cleanup_chain. */
struct cleanup *old_chain)
{
struct cleanup *ptr;
+
while ((ptr = *pmy_chain) != old_chain)
{
- *pmy_chain = ptr->next; /* Do this first incase recursion */
+ *pmy_chain = ptr->next; /* Do this first in case of recursion. */
(*ptr->function) (ptr->arg);
+ if (ptr->free_arg)
+ (*ptr->free_arg) (ptr->arg);
xfree (ptr);
}
}
struct cleanup *old_chain)
{
struct cleanup *ptr;
+
while ((ptr = *pmy_chain) != old_chain)
{
*pmy_chain = ptr->next;
+ if (ptr->free_arg)
+ (*ptr->free_arg) (ptr->arg);
xfree (ptr);
}
}
free_current_contents (void *ptr)
{
void **location = ptr;
+
if (location == NULL)
internal_error (__FILE__, __LINE__,
_("free_current_contents: NULL pointer"));
use the cleanup chain for handling normal cleanups as well as dealing
with cleanups that need to be done as a result of a call to error().
In such cases, we may not be certain where the first cleanup is, unless
- we have a do-nothing one to always use as the base. */
+ we have a do-nothing one to always use as the base. */
void
null_cleanup (void *arg)
{
}
-/* Add a continuation to the continuation list, the global list
- cmd_continuation. The new continuation will be added at the front.*/
+/* If nonzero, display time usage both at startup and for each command. */
+
+static int display_time;
+
+/* If nonzero, display space usage both at startup and for each command. */
+
+static int display_space;
+
+/* Records a run time and space usage to be used as a base for
+ reporting elapsed time or change in space. In addition,
+ the msg_type field indicates whether the saved time is from the
+ beginning of GDB execution (0) or the beginning of an individual
+ command execution (1). */
+struct cmd_stats
+{
+ int msg_type;
+ long start_time;
+ long start_space;
+};
+
+/* Set whether to display time statistics to NEW_VALUE (non-zero
+ means true). */
void
-add_continuation (void (*continuation_hook) (struct continuation_arg *, int),
- struct continuation_arg *arg_list)
+set_display_time (int new_value)
{
- struct continuation *continuation_ptr;
+ display_time = new_value;
+}
- continuation_ptr =
- (struct continuation *) xmalloc (sizeof (struct continuation));
- continuation_ptr->continuation_hook = continuation_hook;
- continuation_ptr->arg_list = arg_list;
- continuation_ptr->next = cmd_continuation;
- cmd_continuation = continuation_ptr;
+/* Set whether to display space statistics to NEW_VALUE (non-zero
+ means true). */
+void
+set_display_space (int new_value)
+{
+ display_space = new_value;
}
-/* Walk down the cmd_continuation list, and execute all the
- continuations. There is a problem though. In some cases new
- continuations may be added while we are in the middle of this
- loop. If this happens they will be added in the front, and done
- before we have a chance of exhausting those that were already
- there. We need to then save the beginning of the list in a pointer
- and do the continuations from there on, instead of using the
- global beginning of list as our iteration pointer. */
+/* As indicated by display_time and display_space, report GDB's elapsed time
+ and space usage from the base time and space provided in ARG, which
+ must be a pointer to a struct cmd_stat. This function is intended
+ to be called as a cleanup. */
+static void
+report_command_stats (void *arg)
+{
+ struct cmd_stats *start_stats = (struct cmd_stats *) arg;
+ int msg_type = start_stats->msg_type;
+
+ if (display_time)
+ {
+ long cmd_time = get_run_time () - start_stats->start_time;
+
+ printf_unfiltered (msg_type == 0
+ ? _("Startup time: %ld.%06ld\n")
+ : _("Command execution time: %ld.%06ld\n"),
+ cmd_time / 1000000, cmd_time % 1000000);
+ }
+
+ if (display_space)
+ {
+#ifdef HAVE_SBRK
+ char *lim = (char *) sbrk (0);
+
+ long space_now = lim - lim_at_start;
+ long space_diff = space_now - start_stats->start_space;
+
+ printf_unfiltered (msg_type == 0
+ ? _("Space used: %ld (%c%ld during startup)\n")
+ : _("Space used: %ld (%c%ld for this command)\n"),
+ space_now,
+ (space_diff >= 0 ? '+' : '-'),
+ space_diff);
+#endif
+ }
+}
+
+/* Create a cleanup that reports time and space used since its
+ creation. Precise messages depend on MSG_TYPE:
+ 0: Initial time/space
+ 1: Individual command time/space. */
+struct cleanup *
+make_command_stats_cleanup (int msg_type)
+{
+ struct cmd_stats *new_stat = XMALLOC (struct cmd_stats);
+
+#ifdef HAVE_SBRK
+ char *lim = (char *) sbrk (0);
+ new_stat->start_space = lim - lim_at_start;
+#endif
+
+ new_stat->msg_type = msg_type;
+ new_stat->start_time = get_run_time ();
+
+ return make_cleanup_dtor (report_command_stats, new_stat, xfree);
+}
+
+/* Continuations are implemented as cleanups internally. Inherit from
+ cleanups. */
+struct continuation
+{
+ struct cleanup base;
+};
+
+/* Add a continuation to the continuation list of THREAD. The new
+ continuation will be added at the front. */
+void
+add_continuation (struct thread_info *thread,
+ void (*continuation_hook) (void *), void *args,
+ void (*continuation_free_args) (void *))
+{
+ struct cleanup *as_cleanup = &thread->continuations->base;
+ make_cleanup_ftype *continuation_hook_fn = continuation_hook;
+
+ make_my_cleanup2 (&as_cleanup,
+ continuation_hook_fn,
+ args,
+ continuation_free_args);
+
+ thread->continuations = (struct continuation *) as_cleanup;
+}
+
+/* Add a continuation to the continuation list of INFERIOR. The new
+ continuation will be added at the front. */
+
+void
+add_inferior_continuation (void (*continuation_hook) (void *), void *args,
+ void (*continuation_free_args) (void *))
+{
+ struct inferior *inf = current_inferior ();
+ struct cleanup *as_cleanup = &inf->continuations->base;
+ make_cleanup_ftype *continuation_hook_fn = continuation_hook;
+
+ make_my_cleanup2 (&as_cleanup,
+ continuation_hook_fn,
+ args,
+ continuation_free_args);
+
+ inf->continuations = (struct continuation *) as_cleanup;
+}
+
+/* Do all continuations of the current inferior. */
+
void
-do_all_continuations (int error)
+do_all_inferior_continuations (void)
{
- struct continuation *continuation_ptr;
- struct continuation *saved_continuation;
+ struct cleanup *as_cleanup;
+ struct inferior *inf = current_inferior ();
+
+ if (inf->continuations == NULL)
+ return;
/* Copy the list header into another pointer, and set the global
list header to null, so that the global list can change as a side
- effect of invoking the continuations and the processing of
- the preexisting continuations will not be affected. */
- continuation_ptr = cmd_continuation;
- cmd_continuation = NULL;
+ effect of invoking the continuations and the processing of the
+ preexisting continuations will not be affected. */
+
+ as_cleanup = &inf->continuations->base;
+ inf->continuations = NULL;
/* Work now on the list we have set aside. */
- while (continuation_ptr)
- {
- (continuation_ptr->continuation_hook) (continuation_ptr->arg_list, error);
- saved_continuation = continuation_ptr;
- continuation_ptr = continuation_ptr->next;
- xfree (saved_continuation);
- }
+ do_my_cleanups (&as_cleanup, NULL);
}
-/* Walk down the cmd_continuation list, and get rid of all the
- continuations. */
+/* Get rid of all the inferior-wide continuations of INF. */
+
void
-discard_all_continuations (void)
+discard_all_inferior_continuations (struct inferior *inf)
{
- struct continuation *continuation_ptr;
+ struct cleanup *continuation_ptr = &inf->continuations->base;
- while (cmd_continuation)
- {
- continuation_ptr = cmd_continuation;
- cmd_continuation = continuation_ptr->next;
- xfree (continuation_ptr);
- }
+ discard_my_cleanups (&continuation_ptr, NULL);
+ inf->continuations = NULL;
}
-/* Add a continuation to the continuation list, the global list
- intermediate_continuation. The new continuation will be added at
- the front. */
+static void
+restore_thread_cleanup (void *arg)
+{
+ ptid_t *ptid_p = arg;
+
+ switch_to_thread (*ptid_p);
+}
+
+/* Walk down the continuation list of PTID, and execute all the
+ continuations. There is a problem though. In some cases new
+ continuations may be added while we are in the middle of this loop.
+ If this happens they will be added in the front, and done before we
+ have a chance of exhausting those that were already there. We need
+ to then save the beginning of the list in a pointer and do the
+ continuations from there on, instead of using the global beginning
+ of list as our iteration pointer. */
+static void
+do_all_continuations_ptid (ptid_t ptid,
+ struct continuation **continuations_p)
+{
+ struct cleanup *old_chain;
+ ptid_t current_thread;
+ struct cleanup *as_cleanup;
+
+ if (*continuations_p == NULL)
+ return;
+
+ current_thread = inferior_ptid;
+
+ /* Restore selected thread on exit. Don't try to restore the frame
+ as well, because:
+
+ - When running continuations, the selected frame is always #0.
+
+ - The continuations may trigger symbol file loads, which may
+ change the frame layout (frame ids change), which would trigger
+ a warning if we used make_cleanup_restore_current_thread. */
+
+ old_chain = make_cleanup (restore_thread_cleanup, ¤t_thread);
+
+ /* Let the continuation see this thread as selected. */
+ switch_to_thread (ptid);
+
+ /* Copy the list header into another pointer, and set the global
+ list header to null, so that the global list can change as a side
+ effect of invoking the continuations and the processing of the
+ preexisting continuations will not be affected. */
+
+ as_cleanup = &(*continuations_p)->base;
+ *continuations_p = NULL;
+
+ /* Work now on the list we have set aside. */
+ do_my_cleanups (&as_cleanup, NULL);
+
+ do_cleanups (old_chain);
+}
+
+/* Callback for iterate over threads. */
+static int
+do_all_continuations_thread_callback (struct thread_info *thread, void *data)
+{
+ do_all_continuations_ptid (thread->ptid, &thread->continuations);
+ return 0;
+}
+
+/* Do all continuations of thread THREAD. */
void
-add_intermediate_continuation (void (*continuation_hook)
- (struct continuation_arg *, int),
- struct continuation_arg *arg_list)
+do_all_continuations_thread (struct thread_info *thread)
{
- struct continuation *continuation_ptr;
+ do_all_continuations_thread_callback (thread, NULL);
+}
- continuation_ptr =
- (struct continuation *) xmalloc (sizeof (struct continuation));
- continuation_ptr->continuation_hook = continuation_hook;
- continuation_ptr->arg_list = arg_list;
- continuation_ptr->next = intermediate_continuation;
- intermediate_continuation = continuation_ptr;
+/* Do all continuations of all threads. */
+void
+do_all_continuations (void)
+{
+ iterate_over_threads (do_all_continuations_thread_callback, NULL);
+}
+
+/* Callback for iterate over threads. */
+static int
+discard_all_continuations_thread_callback (struct thread_info *thread,
+ void *data)
+{
+ struct cleanup *continuation_ptr = &thread->continuations->base;
+
+ discard_my_cleanups (&continuation_ptr, NULL);
+ thread->continuations = NULL;
+ return 0;
+}
+
+/* Get rid of all the continuations of THREAD. */
+void
+discard_all_continuations_thread (struct thread_info *thread)
+{
+ discard_all_continuations_thread_callback (thread, NULL);
+}
+
+/* Get rid of all the continuations of all threads. */
+void
+discard_all_continuations (void)
+{
+ iterate_over_threads (discard_all_continuations_thread_callback, NULL);
+}
+
+
+/* Add a continuation to the intermediate continuation list of THREAD.
+ The new continuation will be added at the front. */
+void
+add_intermediate_continuation (struct thread_info *thread,
+ void (*continuation_hook)
+ (void *), void *args,
+ void (*continuation_free_args) (void *))
+{
+ struct cleanup *as_cleanup = &thread->intermediate_continuations->base;
+ make_cleanup_ftype *continuation_hook_fn = continuation_hook;
+
+ make_my_cleanup2 (&as_cleanup,
+ continuation_hook_fn,
+ args,
+ continuation_free_args);
+
+ thread->intermediate_continuations = (struct continuation *) as_cleanup;
}
/* Walk down the cmd_continuation list, and execute all the
- continuations. There is a problem though. In some cases new
+ continuations. There is a problem though. In some cases new
continuations may be added while we are in the middle of this
- loop. If this happens they will be added in the front, and done
+ loop. If this happens they will be added in the front, and done
before we have a chance of exhausting those that were already
- there. We need to then save the beginning of the list in a pointer
+ there. We need to then save the beginning of the list in a pointer
and do the continuations from there on, instead of using the
- global beginning of list as our iteration pointer.*/
+ global beginning of list as our iteration pointer. */
+static int
+do_all_intermediate_continuations_thread_callback (struct thread_info *thread,
+ void *data)
+{
+ do_all_continuations_ptid (thread->ptid,
+ &thread->intermediate_continuations);
+ return 0;
+}
+
+/* Do all intermediate continuations of thread THREAD. */
void
-do_all_intermediate_continuations (int error)
+do_all_intermediate_continuations_thread (struct thread_info *thread)
{
- struct continuation *continuation_ptr;
- struct continuation *saved_continuation;
+ do_all_intermediate_continuations_thread_callback (thread, NULL);
+}
- /* Copy the list header into another pointer, and set the global
- list header to null, so that the global list can change as a side
- effect of invoking the continuations and the processing of
- the preexisting continuations will not be affected. */
- continuation_ptr = intermediate_continuation;
- intermediate_continuation = NULL;
+/* Do all intermediate continuations of all threads. */
+void
+do_all_intermediate_continuations (void)
+{
+ iterate_over_threads (do_all_intermediate_continuations_thread_callback,
+ NULL);
+}
- /* Work now on the list we have set aside. */
- while (continuation_ptr)
- {
- (continuation_ptr->continuation_hook) (continuation_ptr->arg_list, error);
- saved_continuation = continuation_ptr;
- continuation_ptr = continuation_ptr->next;
- xfree (saved_continuation);
- }
+/* Callback for iterate over threads. */
+static int
+discard_all_intermediate_continuations_thread_callback (struct thread_info *thread,
+ void *data)
+{
+ struct cleanup *continuation_ptr = &thread->intermediate_continuations->base;
+
+ discard_my_cleanups (&continuation_ptr, NULL);
+ thread->intermediate_continuations = NULL;
+ return 0;
}
-/* Walk down the cmd_continuation list, and get rid of all the
- continuations. */
+/* Get rid of all the intermediate continuations of THREAD. */
void
-discard_all_intermediate_continuations (void)
+discard_all_intermediate_continuations_thread (struct thread_info *thread)
{
- struct continuation *continuation_ptr;
+ discard_all_intermediate_continuations_thread_callback (thread, NULL);
+}
- while (intermediate_continuation)
- {
- continuation_ptr = intermediate_continuation;
- intermediate_continuation = continuation_ptr->next;
- xfree (continuation_ptr);
- }
+/* Get rid of all the intermediate continuations of all threads. */
+void
+discard_all_intermediate_continuations (void)
+{
+ iterate_over_threads (discard_all_intermediate_continuations_thread_callback,
+ NULL);
}
\f
else
{
target_terminal_ours ();
- wrap_here (""); /* Force out any buffered output */
+ wrap_here (""); /* Force out any buffered output. */
gdb_flush (gdb_stdout);
if (warning_pre_print)
fputs_unfiltered (warning_pre_print, gdb_stderr);
warning (const char *string, ...)
{
va_list args;
+
va_start (args, string);
vwarning (string, args);
va_end (args);
The first argument STRING is the error message, used as a fprintf string,
and the remaining args are passed as arguments to it. */
-NORETURN void
+void
verror (const char *string, va_list args)
{
throw_verror (GENERIC_ERROR, string, args);
}
-NORETURN void
+void
error (const char *string, ...)
{
va_list args;
+
va_start (args, string);
throw_verror (GENERIC_ERROR, string, args);
va_end (args);
The first argument STRING is the error message, used as a fprintf string,
and the remaining args are passed as arguments to it. */
-NORETURN void
+void
vfatal (const char *string, va_list args)
{
throw_vfatal (string, args);
}
-NORETURN void
+void
fatal (const char *string, ...)
{
va_list args;
+
va_start (args, string);
throw_vfatal (string, args);
va_end (args);
}
-NORETURN void
+void
error_stream (struct ui_file *stream)
{
- long len;
- char *message = ui_file_xstrdup (stream, &len);
+ char *message = ui_file_xstrdup (stream, NULL);
+
make_cleanup (xfree, message);
error (("%s"), message);
}
-/* Print a message reporting an internal error/warning. Ask the user
+/* Dump core trying to increase the core soft limit to hard limit first. */
+
+static void
+dump_core (void)
+{
+#ifdef HAVE_SETRLIMIT
+ struct rlimit rlim = { RLIM_INFINITY, RLIM_INFINITY };
+
+ setrlimit (RLIMIT_CORE, &rlim);
+#endif /* HAVE_SETRLIMIT */
+
+ abort (); /* NOTE: GDB has only three calls to abort(). */
+}
+
+/* Check whether GDB will be able to dump core using the dump_core
+ function. */
+
+static int
+can_dump_core (const char *reason)
+{
+#ifdef HAVE_GETRLIMIT
+ struct rlimit rlim;
+
+ /* Be quiet and assume we can dump if an error is returned. */
+ if (getrlimit (RLIMIT_CORE, &rlim) != 0)
+ return 1;
+
+ if (rlim.rlim_max == 0)
+ {
+ fprintf_unfiltered (gdb_stderr,
+ _("%s\nUnable to dump core, use `ulimit -c"
+ " unlimited' before executing GDB next time.\n"),
+ reason);
+ return 0;
+ }
+#endif /* HAVE_GETRLIMIT */
+
+ return 1;
+}
+
+/* Allow the user to configure the debugger behavior with respect to
+ what to do when an internal problem is detected. */
+
+const char internal_problem_ask[] = "ask";
+const char internal_problem_yes[] = "yes";
+const char internal_problem_no[] = "no";
+static const char *internal_problem_modes[] =
+{
+ internal_problem_ask,
+ internal_problem_yes,
+ internal_problem_no,
+ NULL
+};
+
+/* Print a message reporting an internal error/warning. Ask the user
if they want to continue, dump core, or just exit. Return
something to indicate a quit. */
struct internal_problem
{
const char *name;
- /* FIXME: cagney/2002-08-15: There should be ``maint set/show''
- commands available for controlling these variables. */
- enum auto_boolean should_quit;
- enum auto_boolean should_dump_core;
+ const char *should_quit;
+ const char *should_dump_core;
};
/* Report a problem, internal to GDB, to the user. Once the problem
has been reported, and assuming GDB didn't quit, the caller can
either allow execution to resume or throw an error. */
-static void ATTR_FORMAT (printf, 4, 0)
+static void ATTRIBUTE_PRINTF (4, 0)
internal_vproblem (struct internal_problem *problem,
const char *file, int line, const char *fmt, va_list ap)
{
/* Don't allow infinite error/warning recursion. */
{
static char msg[] = "Recursive internal problem.\n";
+
switch (dejavu)
{
case 0:
abort (); /* NOTE: GDB has only three calls to abort(). */
default:
dejavu = 3;
- write (STDERR_FILENO, msg, sizeof (msg));
+ /* Newer GLIBC versions put the warn_unused_result attribute
+ on write, but this is one of those rare cases where
+ ignoring the return value is correct. Casting to (void)
+ does not fix this problem. This is the solution suggested
+ at http://gcc.gnu.org/bugzilla/show_bug.cgi?id=25509. */
+ if (write (STDERR_FILENO, msg, sizeof (msg)) != sizeof (msg))
+ abort (); /* NOTE: GDB has only three calls to abort(). */
exit (1);
}
}
so that the user knows that they are living on the edge. */
{
char *msg;
+
msg = xstrvprintf (fmt, ap);
- reason = xstrprintf ("\
-%s:%d: %s: %s\n\
-A problem internal to GDB has been detected,\n\
-further debugging may prove unreliable.", file, line, problem->name, msg);
+ reason = xstrprintf ("%s:%d: %s: %s\n"
+ "A problem internal to GDB has been detected,\n"
+ "further debugging may prove unreliable.",
+ file, line, problem->name, msg);
xfree (msg);
make_cleanup (xfree, reason);
}
- switch (problem->should_quit)
+ if (problem->should_quit == internal_problem_ask)
{
- case AUTO_BOOLEAN_AUTO:
/* Default (yes/batch case) is to quit GDB. When in batch mode
- this lessens the likelhood of GDB going into an infinate
- loop. */
- quit_p = query (_("%s\nQuit this debugging session? "), reason);
- break;
- case AUTO_BOOLEAN_TRUE:
- quit_p = 1;
- break;
- case AUTO_BOOLEAN_FALSE:
- quit_p = 0;
- break;
- default:
- internal_error (__FILE__, __LINE__, _("bad switch"));
+ this lessens the likelihood of GDB going into an infinite
+ loop. */
+ if (caution == 0)
+ {
+ /* Emit the message and quit. */
+ fputs_unfiltered (reason, gdb_stderr);
+ fputs_unfiltered ("\n", gdb_stderr);
+ quit_p = 1;
+ }
+ else
+ quit_p = query (_("%s\nQuit this debugging session? "), reason);
}
+ else if (problem->should_quit == internal_problem_yes)
+ quit_p = 1;
+ else if (problem->should_quit == internal_problem_no)
+ quit_p = 0;
+ else
+ internal_error (__FILE__, __LINE__, _("bad switch"));
- switch (problem->should_dump_core)
+ if (problem->should_dump_core == internal_problem_ask)
{
- case AUTO_BOOLEAN_AUTO:
- /* Default (yes/batch case) is to dump core. This leaves a GDB
- `dropping' so that it is easier to see that something went
- wrong in GDB. */
- dump_core_p = query (_("%s\nCreate a core file of GDB? "), reason);
- break;
- break;
- case AUTO_BOOLEAN_TRUE:
- dump_core_p = 1;
- break;
- case AUTO_BOOLEAN_FALSE:
- dump_core_p = 0;
- break;
- default:
- internal_error (__FILE__, __LINE__, _("bad switch"));
+ if (!can_dump_core (reason))
+ dump_core_p = 0;
+ else
+ {
+ /* Default (yes/batch case) is to dump core. This leaves a GDB
+ `dropping' so that it is easier to see that something went
+ wrong in GDB. */
+ dump_core_p = query (_("%s\nCreate a core file of GDB? "), reason);
+ }
}
+ else if (problem->should_dump_core == internal_problem_yes)
+ dump_core_p = can_dump_core (reason);
+ else if (problem->should_dump_core == internal_problem_no)
+ dump_core_p = 0;
+ else
+ internal_error (__FILE__, __LINE__, _("bad switch"));
if (quit_p)
{
if (dump_core_p)
- abort (); /* NOTE: GDB has only three calls to abort(). */
+ dump_core ();
else
exit (1);
}
{
#ifdef HAVE_WORKING_FORK
if (fork () == 0)
- abort (); /* NOTE: GDB has only three calls to abort(). */
+ dump_core ();
#endif
}
}
}
static struct internal_problem internal_error_problem = {
- "internal-error", AUTO_BOOLEAN_AUTO, AUTO_BOOLEAN_AUTO
+ "internal-error", internal_problem_ask, internal_problem_ask
};
-NORETURN void
+void
internal_verror (const char *file, int line, const char *fmt, va_list ap)
{
internal_vproblem (&internal_error_problem, file, line, fmt, ap);
deprecated_throw_reason (RETURN_ERROR);
}
-NORETURN void
+void
internal_error (const char *file, int line, const char *string, ...)
{
va_list ap;
+
va_start (ap, string);
internal_verror (file, line, string, ap);
va_end (ap);
}
static struct internal_problem internal_warning_problem = {
- "internal-warning", AUTO_BOOLEAN_AUTO, AUTO_BOOLEAN_AUTO
+ "internal-warning", internal_problem_ask, internal_problem_ask
};
void
internal_warning (const char *file, int line, const char *string, ...)
{
va_list ap;
+
va_start (ap, string);
internal_vwarning (file, line, string, ap);
va_end (ap);
}
+/* Dummy functions to keep add_prefix_cmd happy. */
+
+static void
+set_internal_problem_cmd (char *args, int from_tty)
+{
+}
+
+static void
+show_internal_problem_cmd (char *args, int from_tty)
+{
+}
+
+/* When GDB reports an internal problem (error or warning) it gives
+ the user the opportunity to quit GDB and/or create a core file of
+ the current debug session. This function registers a few commands
+ that make it possible to specify that GDB should always or never
+ quit or create a core file, without asking. The commands look
+ like:
+
+ maint set PROBLEM-NAME quit ask|yes|no
+ maint show PROBLEM-NAME quit
+ maint set PROBLEM-NAME corefile ask|yes|no
+ maint show PROBLEM-NAME corefile
+
+ Where PROBLEM-NAME is currently "internal-error" or
+ "internal-warning". */
+
+static void
+add_internal_problem_command (struct internal_problem *problem)
+{
+ struct cmd_list_element **set_cmd_list;
+ struct cmd_list_element **show_cmd_list;
+ char *set_doc;
+ char *show_doc;
+
+ set_cmd_list = xmalloc (sizeof (*set_cmd_list));
+ show_cmd_list = xmalloc (sizeof (*set_cmd_list));
+ *set_cmd_list = NULL;
+ *show_cmd_list = NULL;
+
+ set_doc = xstrprintf (_("Configure what GDB does when %s is detected."),
+ problem->name);
+
+ show_doc = xstrprintf (_("Show what GDB does when %s is detected."),
+ problem->name);
+
+ add_prefix_cmd ((char*) problem->name,
+ class_maintenance, set_internal_problem_cmd, set_doc,
+ set_cmd_list,
+ concat ("maintenance set ", problem->name, " ",
+ (char *) NULL),
+ 0/*allow-unknown*/, &maintenance_set_cmdlist);
+
+ add_prefix_cmd ((char*) problem->name,
+ class_maintenance, show_internal_problem_cmd, show_doc,
+ show_cmd_list,
+ concat ("maintenance show ", problem->name, " ",
+ (char *) NULL),
+ 0/*allow-unknown*/, &maintenance_show_cmdlist);
+
+ set_doc = xstrprintf (_("Set whether GDB should quit "
+ "when an %s is detected"),
+ problem->name);
+ show_doc = xstrprintf (_("Show whether GDB will quit "
+ "when an %s is detected"),
+ problem->name);
+ add_setshow_enum_cmd ("quit", class_maintenance,
+ internal_problem_modes,
+ &problem->should_quit,
+ set_doc,
+ show_doc,
+ NULL, /* help_doc */
+ NULL, /* setfunc */
+ NULL, /* showfunc */
+ set_cmd_list,
+ show_cmd_list);
+
+ xfree (set_doc);
+ xfree (show_doc);
+
+ set_doc = xstrprintf (_("Set whether GDB should create a core "
+ "file of GDB when %s is detected"),
+ problem->name);
+ show_doc = xstrprintf (_("Show whether GDB will create a core "
+ "file of GDB when %s is detected"),
+ problem->name);
+ add_setshow_enum_cmd ("corefile", class_maintenance,
+ internal_problem_modes,
+ &problem->should_dump_core,
+ set_doc,
+ show_doc,
+ NULL, /* help_doc */
+ NULL, /* setfunc */
+ NULL, /* showfunc */
+ set_cmd_list,
+ show_cmd_list);
+
+ xfree (set_doc);
+ xfree (show_doc);
+}
+
/* Print the system error message for errno, and also mention STRING
as the file name for which the error was encountered.
Then return to command level. */
-NORETURN void
+void
perror_with_name (const char *string)
{
char *err;
/* I understand setting these is a matter of taste. Still, some people
may clear errno but not know about bfd_error. Doing this here is not
- unreasonable. */
+ unreasonable. */
bfd_set_error (bfd_error_no_error);
errno = 0;
\f
/* Called when a memory allocation fails, with the number of bytes of
- memory requested in SIZE. */
+ memory requested in SIZE. */
-NORETURN void
+void
nomem (long size)
{
if (size > 0)
/* NOTE: These are declared using PTR to ensure consistency with
"libiberty.h". xfree() is GDB local. */
-PTR /* OK: PTR */
+PTR /* ARI: PTR */
xmalloc (size_t size)
{
void *val;
if (size == 0)
size = 1;
- val = malloc (size); /* OK: malloc */
+ val = malloc (size); /* ARI: malloc */
if (val == NULL)
nomem (size);
return xcalloc (1, size);
}
-PTR /* OK: PTR */
-xrealloc (PTR ptr, size_t size) /* OK: PTR */
+PTR /* ARI: PTR */
+xrealloc (PTR ptr, size_t size) /* ARI: PTR */
{
void *val;
size = 1;
if (ptr != NULL)
- val = realloc (ptr, size); /* OK: realloc */
+ val = realloc (ptr, size); /* ARI: realloc */
else
- val = malloc (size); /* OK: malloc */
+ val = malloc (size); /* ARI: malloc */
if (val == NULL)
nomem (size);
return (val);
}
-PTR /* OK: PTR */
+PTR /* ARI: PTR */
xcalloc (size_t number, size_t size)
{
void *mem;
size = 1;
}
- mem = calloc (number, size); /* OK: xcalloc */
+ mem = calloc (number, size); /* ARI: xcalloc */
if (mem == NULL)
nomem (number * size);
xfree (void *ptr)
{
if (ptr != NULL)
- free (ptr); /* OK: free */
+ free (ptr); /* ARI: free */
}
\f
/* Like asprintf/vasprintf but get an internal_error if the call
- fails. */
+ fails. */
char *
xstrprintf (const char *format, ...)
{
char *ret;
va_list args;
+
va_start (args, format);
ret = xstrvprintf (format, args);
va_end (args);
xasprintf (char **ret, const char *format, ...)
{
va_list args;
+
va_start (args, format);
(*ret) = xstrvprintf (format, args);
va_end (args);
{
char *ret = NULL;
int status = vasprintf (&ret, format, ap);
+
/* NULL is returned when there was a memory allocation problem, or
any other error (for instance, a bad format string). A negative
status (the printed length) with a non-NULL buffer should never
savestring (const char *ptr, size_t size)
{
char *p = (char *) xmalloc (size + 1);
+
memcpy (p, ptr, size);
p[size] = 0;
return p;
void
gdb_print_host_address (const void *addr, struct ui_file *stream)
{
+ fprintf_filtered (stream, "%s", host_address_to_string (addr));
+}
+\f
- /* We could use the %p conversion specifier to fprintf if we had any
- way of knowing whether this host supports it. But the following
- should work on the Alpha and on 32 bit machines. */
+/* A cleanup function that calls regfree. */
- fprintf_filtered (stream, "0x%lx", (unsigned long) addr);
+static void
+do_regfree_cleanup (void *r)
+{
+ regfree (r);
}
+
+/* Create a new cleanup that frees the compiled regular expression R. */
+
+struct cleanup *
+make_regfree_cleanup (regex_t *r)
+{
+ return make_cleanup (do_regfree_cleanup, r);
+}
+
+/* Return an xmalloc'd error message resulting from a regular
+ expression compilation failure. */
+
+char *
+get_regcomp_error (int code, regex_t *rx)
+{
+ size_t length = regerror (code, rx, NULL, 0);
+ char *result = xmalloc (length);
+
+ regerror (code, rx, result, length);
+ return result;
+}
+
\f
/* This function supports the query, nquery, and yquery functions.
ARGS are the arguments passed along with the CTLSTR argument to
printf. */
-static int ATTR_FORMAT (printf, 1, 0)
+static int ATTRIBUTE_PRINTF (1, 0)
defaulted_query (const char *ctlstr, const char defchar, va_list args)
{
int answer;
}
/* Automatically answer the default value if the user did not want
- prompts. */
- if (! caution)
+ prompts or the command was issued with the server prefix. */
+ if (! caution || server_command)
return def_value;
/* If input isn't coming from the user directly, just say what
- question we're asking, and then answer "yes" automatically. This
+ question we're asking, and then answer the default automatically. This
way, important error messages don't get lost when talking to GDB
over a pipe. */
if (! input_from_terminal_p ())
wrap_here ("");
vfprintf_filtered (gdb_stdout, ctlstr, args);
- printf_filtered (_("(%s or %s) [answered %c; input not from terminal]\n"),
+ printf_filtered (_("(%s or %s) [answered %c; "
+ "input not from terminal]\n"),
y_string, n_string, def_answer);
gdb_flush (gdb_stdout);
return def_value;
}
- /* Automatically answer the default value if input is not from the user
- directly, or if the user did not want prompts. */
- if (!input_from_terminal_p () || !caution)
- return def_value;
-
if (deprecated_query_hook)
{
return deprecated_query_hook (ctlstr, args);
while (1)
{
- wrap_here (""); /* Flush any buffered output */
+ wrap_here (""); /* Flush any buffered output. */
gdb_flush (gdb_stdout);
if (annotation_level > 1)
gdb_flush (gdb_stdout);
answer = fgetc (stdin);
+
+ /* We expect fgetc to block until a character is read. But
+ this may not be the case if the terminal was opened with
+ the NONBLOCK flag. In that case, if there is nothing to
+ read on stdin, fgetc returns EOF, but also sets the error
+ condition flag on stdin and errno to EAGAIN. With a true
+ EOF, stdin's error condition flag is not set.
+
+ A situation where this behavior was observed is a pseudo
+ terminal on AIX. */
+ while (answer == EOF && ferror (stdin) && errno == EAGAIN)
+ {
+ /* Not a real EOF. Wait a little while and try again until
+ we read something. */
+ clearerr (stdin);
+ gdb_usleep (10000);
+ answer = fgetc (stdin);
+ }
+
clearerr (stdin); /* in case of C-d */
if (answer == EOF) /* C-d */
{
retval = def_value;
break;
}
- /* Eat rest of input line, to EOF or newline */
+ /* Eat rest of input line, to EOF or newline. */
if (answer != '\n')
do
{
nquery (const char *ctlstr, ...)
{
va_list args;
+ int ret;
va_start (args, ctlstr);
- return defaulted_query (ctlstr, 'n', args);
+ ret = defaulted_query (ctlstr, 'n', args);
va_end (args);
+ return ret;
}
/* Ask user a y-or-n question and return 0 if answer is no, 1 if
yquery (const char *ctlstr, ...)
{
va_list args;
+ int ret;
va_start (args, ctlstr);
- return defaulted_query (ctlstr, 'y', args);
+ ret = defaulted_query (ctlstr, 'y', args);
va_end (args);
+ return ret;
}
/* Ask user a y-or-n question and return 1 iff answer is yes.
query (const char *ctlstr, ...)
{
va_list args;
+ int ret;
va_start (args, ctlstr);
- return defaulted_query (ctlstr, '\0', args);
+ ret = defaulted_query (ctlstr, '\0', args);
va_end (args);
+ return ret;
}
-/* Print an error message saying that we couldn't make sense of a
- \^mumble sequence in a string or character constant. START and END
- indicate a substring of some larger string that contains the
- erroneous backslash sequence, missing the initial backslash. */
-static NORETURN int
-no_control_char_error (const char *start, const char *end)
+/* A helper for parse_escape that converts a host character to a
+ target character. C is the host character. If conversion is
+ possible, then the target character is stored in *TARGET_C and the
+ function returns 1. Otherwise, the function returns 0. */
+
+static int
+host_char_to_target (struct gdbarch *gdbarch, int c, int *target_c)
{
- int len = end - start;
- char *copy = alloca (end - start + 1);
+ struct obstack host_data;
+ char the_char = c;
+ struct cleanup *cleanups;
+ int result = 0;
+
+ obstack_init (&host_data);
+ cleanups = make_cleanup_obstack_free (&host_data);
- memcpy (copy, start, len);
- copy[len] = '\0';
+ convert_between_encodings (target_charset (gdbarch), host_charset (),
+ &the_char, 1, 1, &host_data, translit_none);
- error (_("There is no control character `\\%s' in the `%s' character set."),
- copy, target_charset ());
+ if (obstack_object_size (&host_data) == 1)
+ {
+ result = 1;
+ *target_c = *(char *) obstack_base (&host_data);
+ }
+
+ do_cleanups (cleanups);
+ return result;
}
/* Parse a C escape sequence. STRING_PTR points to a variable
after the zeros. A value of 0 does not mean end of string. */
int
-parse_escape (char **string_ptr)
+parse_escape (struct gdbarch *gdbarch, char **string_ptr)
{
- int target_char;
+ int target_char = -2; /* Initialize to avoid GCC warnings. */
int c = *(*string_ptr)++;
- if (c_parse_backslash (c, &target_char))
- return target_char;
- else
- switch (c)
- {
+
+ switch (c)
+ {
case '\n':
return -2;
case 0:
(*string_ptr)--;
return 0;
- case '^':
- {
- /* Remember where this escape sequence started, for reporting
- errors. */
- char *sequence_start_pos = *string_ptr - 1;
-
- c = *(*string_ptr)++;
-
- if (c == '?')
- {
- /* XXXCHARSET: What is `delete' in the host character set? */
- c = 0177;
-
- if (!host_char_to_target (c, &target_char))
- error (_("There is no character corresponding to `Delete' "
- "in the target character set `%s'."), host_charset ());
-
- return target_char;
- }
- else if (c == '\\')
- target_char = parse_escape (string_ptr);
- else
- {
- if (!host_char_to_target (c, &target_char))
- no_control_char_error (sequence_start_pos, *string_ptr);
- }
-
- /* Now target_char is something like `c', and we want to find
- its control-character equivalent. */
- if (!target_char_to_control_char (target_char, &target_char))
- no_control_char_error (sequence_start_pos, *string_ptr);
-
- return target_char;
- }
-
- /* XXXCHARSET: we need to use isdigit and value-of-digit
- methods of the host character set here. */
case '0':
case '1':
case '6':
case '7':
{
- int i = c - '0';
+ int i = host_hex_value (c);
int count = 0;
while (++count < 3)
{
c = (**string_ptr);
- if (c >= '0' && c <= '7')
+ if (isdigit (c) && c != '8' && c != '9')
{
(*string_ptr)++;
i *= 8;
- i += c - '0';
+ i += host_hex_value (c);
}
else
{
}
return i;
}
- default:
- if (!host_char_to_target (c, &target_char))
- error
- ("The escape sequence `\%c' is equivalent to plain `%c', which"
- " has no equivalent\n" "in the `%s' character set.", c, c,
- target_charset ());
- return target_char;
- }
+
+ case 'a':
+ c = '\a';
+ break;
+ case 'b':
+ c = '\b';
+ break;
+ case 'f':
+ c = '\f';
+ break;
+ case 'n':
+ c = '\n';
+ break;
+ case 'r':
+ c = '\r';
+ break;
+ case 't':
+ c = '\t';
+ break;
+ case 'v':
+ c = '\v';
+ break;
+
+ default:
+ break;
+ }
+
+ if (!host_char_to_target (gdbarch, c, &target_char))
+ error (_("The escape sequence `\\%c' is equivalent to plain `%c',"
+ " which has no equivalent\nin the `%s' character set."),
+ c, c, target_charset (gdbarch));
+ return target_char;
}
\f
/* Print the character C on STREAM as part of the contents of a literal
string whose delimiter is QUOTER. Note that this routine should only
be call for printing things which are independent of the language
- of the program being debugged. */
+ of the program being debugged. */
static void
printchar (int c, void (*do_fputs) (const char *, struct ui_file *),
void (*do_fprintf) (struct ui_file *, const char *, ...)
ATTRIBUTE_FPTR_PRINTF_2, struct ui_file *stream, int quoter)
{
-
c &= 0xFF; /* Avoid sign bit follies */
if (c < 0x20 || /* Low control chars */
/* Print the character C on STREAM as part of the contents of a
literal string whose delimiter is QUOTER. Note that these routines
should only be call for printing things which are independent of
- the language of the program being debugged. */
+ the language of the program being debugged. */
void
fputstr_filtered (const char *str, int quoter, struct ui_file *stream)
struct ui_file *stream)
{
int i;
+
for (i = 0; i < n; i++)
printchar (str[i], fputs_filtered, fprintf_filtered, stream, quoter);
}
struct ui_file *stream)
{
int i;
+
for (i = 0; i < n; i++)
printchar (str[i], fputs_unfiltered, fprintf_unfiltered, stream, quoter);
}
show_lines_per_page (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
- fprintf_filtered (file, _("\
-Number of lines gdb thinks are in a page is %s.\n"),
+ fprintf_filtered (file,
+ _("Number of lines gdb thinks are in a page is %s.\n"),
value);
}
show_chars_per_line (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
- fprintf_filtered (file, _("\
-Number of characters gdb thinks are in a line is %s.\n"),
+ fprintf_filtered (file,
+ _("Number of characters gdb thinks "
+ "are in a line is %s.\n"),
value);
}
void
init_page_info (void)
{
+ if (batch_flag)
+ {
+ lines_per_page = UINT_MAX;
+ chars_per_line = UINT_MAX;
+ }
+ else
#if defined(TUI)
if (!tui_get_command_dimension (&chars_per_line, &lines_per_page))
#endif
set_width ();
}
+/* Helper for make_cleanup_restore_page_info. */
+
+static void
+do_restore_page_info_cleanup (void *arg)
+{
+ set_screen_size ();
+ set_width ();
+}
+
+/* Provide cleanup for restoring the terminal size. */
+
+struct cleanup *
+make_cleanup_restore_page_info (void)
+{
+ struct cleanup *back_to;
+
+ back_to = make_cleanup (do_restore_page_info_cleanup, NULL);
+ make_cleanup_restore_uinteger (&lines_per_page);
+ make_cleanup_restore_uinteger (&chars_per_line);
+
+ return back_to;
+}
+
+/* Temporarily set BATCH_FLAG and the associated unlimited terminal size.
+ Provide cleanup for restoring the original state. */
+
+struct cleanup *
+set_batch_flag_and_make_cleanup_restore_page_info (void)
+{
+ struct cleanup *back_to = make_cleanup_restore_page_info ();
+
+ make_cleanup_restore_integer (&batch_flag);
+ batch_flag = 1;
+ init_page_info ();
+
+ return back_to;
+}
+
/* Set the screen size based on LINES_PER_PAGE and CHARS_PER_LINE. */
static void
if (ignore)
{
char *p = ignore;
+
while (*p == ' ' || *p == '\t')
++p;
if (p[0] == 'q')
need to save the ---Type <return>--- line at the top of the screen. */
reinitialize_more_filter ();
- dont_repeat (); /* Forget prev cmd -- CR won't repeat it. */
+ dont_repeat (); /* Forget prev cmd -- CR won't repeat it. */
}
/* Reinitialize filter; ie. tell it to reset to original values. */
}
/* Indicate that if the next sequence of characters overflows the line,
- a newline should be inserted here rather than when it hits the end.
+ a newline should be inserted here rather than when it hits the end.
If INDENT is non-null, it is a string to be printed to indent the
wrapped part on the next line. INDENT must remain accessible until
the next call to wrap_here() or until a newline is printed through
void
wrap_here (char *indent)
{
- /* This should have been allocated, but be paranoid anyway. */
+ /* This should have been allocated, but be paranoid anyway. */
if (!wrap_buffer)
- internal_error (__FILE__, __LINE__, _("failed internal consistency check"));
+ internal_error (__FILE__, __LINE__,
+ _("failed internal consistency check"));
if (wrap_buffer[0])
{
}
wrap_pointer = wrap_buffer;
wrap_buffer[0] = '\0';
- if (chars_per_line == UINT_MAX) /* No line overflow checking */
+ if (chars_per_line == UINT_MAX) /* No line overflow checking. */
{
wrap_column = 0;
}
}
/* Print input string to gdb_stdout, filtered, with wrap,
- arranging strings in columns of n chars. String can be
+ arranging strings in columns of n chars. String can be
right or left justified in the column. Never prints
trailing spaces. String should never be longer than
width. FIXME: this could be useful for the EXAMINE
- command, which currently doesn't tabulate very well */
+ command, which currently doesn't tabulate very well. */
void
puts_filtered_tabular (char *string, int width, int right)
/* Ensure that whatever gets printed next, using the filtered output
- commands, starts at the beginning of the line. I.E. if there is
+ commands, starts at the beginning of the line. I.e. if there is
any pending output for the current line, flush it and start a new
- line. Otherwise do nothing. */
+ line. Otherwise do nothing. */
void
begin_line (void)
return;
/* Don't do any filtering if it is disabled. */
- if ((stream != gdb_stdout) || !pagination_enabled
- || (lines_per_page == UINT_MAX && chars_per_line == UINT_MAX))
+ if (stream != gdb_stdout
+ || ! pagination_enabled
+ || ! input_from_terminal_p ()
+ || (lines_per_page == UINT_MAX && chars_per_line == UINT_MAX)
+ || top_level_interpreter () == NULL
+ || ui_out_is_mi_like_p (interp_ui_out (top_level_interpreter ())))
{
fputs_unfiltered (linebuffer, stream);
return;
if (lines_printed >= lines_per_page - 1)
prompt_for_continue ();
- /* Now output indentation and wrapped string */
+ /* Now output indentation and wrapped string. */
if (wrap_column)
{
fputs_unfiltered (wrap_indent, stream);
- *wrap_pointer = '\0'; /* Null-terminate saved stuff */
- fputs_unfiltered (wrap_buffer, stream); /* and eject it */
+ *wrap_pointer = '\0'; /* Null-terminate saved stuff, */
+ fputs_unfiltered (wrap_buffer, stream); /* and eject it. */
/* FIXME, this strlen is what prevents wrap_indent from
containing tabs. However, if we recurse to print it
and count its chars, we risk trouble if wrap_indent is
- longer than (the user settable) chars_per_line.
+ longer than (the user settable) chars_per_line.
Note also that this can set chars_printed > chars_per_line
if we are printing a long string. */
chars_printed = strlen (wrap_indent)
if (*lineptr == '\n')
{
chars_printed = 0;
- wrap_here ((char *) 0); /* Spit out chars, cancel further wraps */
+ wrap_here ((char *) 0); /* Spit out chars, cancel
+ further wraps. */
lines_printed++;
fputc_unfiltered ('\n', stream);
lineptr++;
putchar_unfiltered (int c)
{
char buf = c;
+
ui_file_write (gdb_stdout, &buf, 1);
return c;
}
fputc_unfiltered (int c, struct ui_file *stream)
{
char buf = c;
+
ui_file_write (stream, &buf, 1);
return c;
}
{
struct timeval tm;
char *timestamp;
+ int len, need_nl;
gettimeofday (&tm, NULL);
- timestamp = xstrprintf ("%ld:%ld ", (long) tm.tv_sec, (long) tm.tv_usec);
+
+ len = strlen (linebuffer);
+ need_nl = (len > 0 && linebuffer[len - 1] != '\n');
+
+ timestamp = xstrprintf ("%ld:%ld %s%s",
+ (long) tm.tv_sec, (long) tm.tv_usec,
+ linebuffer,
+ need_nl ? "\n": "");
make_cleanup (xfree, timestamp);
fputs_unfiltered (timestamp, stream);
}
- fputs_unfiltered (linebuffer, stream);
+ else
+ fputs_unfiltered (linebuffer, stream);
do_cleanups (old_cleanups);
}
fprintf_filtered (struct ui_file *stream, const char *format, ...)
{
va_list args;
+
va_start (args, format);
vfprintf_filtered (stream, format, args);
va_end (args);
fprintf_unfiltered (struct ui_file *stream, const char *format, ...)
{
va_list args;
+
va_start (args, format);
vfprintf_unfiltered (stream, format, args);
va_end (args);
...)
{
va_list args;
+
va_start (args, format);
print_spaces_filtered (spaces, stream);
printf_filtered (const char *format, ...)
{
va_list args;
+
va_start (args, format);
vfprintf_filtered (gdb_stdout, format, args);
va_end (args);
printf_unfiltered (const char *format, ...)
{
va_list args;
+
va_start (args, format);
vfprintf_unfiltered (gdb_stdout, format, args);
va_end (args);
printfi_filtered (int spaces, const char *format, ...)
{
va_list args;
+
va_start (args, format);
print_spaces_filtered (spaces, gdb_stdout);
vfprintf_filtered (gdb_stdout, format, args);
/* fprintf_symbol_filtered attempts to demangle NAME, a symbol in language
LANG, using demangling args ARG_MODE, and print it filtered to STREAM.
If the name is not mangled, or the language for the name is unknown, or
- demangling is off, the name is printed in its "raw" form. */
+ demangling is off, the name is printed in its "raw" form. */
void
fprintf_symbol_filtered (struct ui_file *stream, char *name,
As an extra hack, string1=="FOO(ARGS)" matches string2=="FOO".
This "feature" is useful when searching for matching C++ function names
(such as if the user types 'break FOO', where FOO is a mangled C++
- function). */
+ function). */
int
strcmp_iw (const char *string1, const char *string2)
subset_compare (char *string_to_compare, char *template_string)
{
int match;
+
if (template_string != (char *) NULL && string_to_compare != (char *) NULL
&& strlen (string_to_compare) <= strlen (template_string))
match =
show_debug_timestamp (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
- fprintf_filtered (file, _("Timestamping debugging messages is %s.\n"), value);
+ fprintf_filtered (file, _("Timestamping debugging messages is %s.\n"),
+ value);
}
\f
void
initialize_utils (void)
{
- struct cmd_list_element *c;
-
add_setshow_uinteger_cmd ("width", class_support, &chars_per_line, _("\
Set number of characters gdb thinks are in a line."), _("\
Show number of characters gdb thinks are in a line."), NULL,
&setdebuglist, &showdebuglist);
}
-/* Machine specific function to handle SIGWINCH signal. */
+/* Machine specific function to handle SIGWINCH signal. */
#ifdef SIGWINCH_HANDLER_BODY
SIGWINCH_HANDLER_BODY
#endif
-/* print routines to handle variable size regs, etc. */
-/* temporary storage using circular buffer */
+/* Print routines to handle variable size regs, etc. */
+/* Temporary storage using circular buffer. */
#define NUMCELLS 16
#define CELLSIZE 50
static char *
{
static char buf[NUMCELLS][CELLSIZE];
static int cell = 0;
+
if (++cell >= NUMCELLS)
cell = 0;
return buf[cell];
}
-int
-strlen_paddr (void)
-{
- return (gdbarch_addr_bit (current_gdbarch) / 8 * 2);
-}
-
-char *
-paddr (CORE_ADDR addr)
-{
- return phex (addr, gdbarch_addr_bit (current_gdbarch) / 8);
-}
-
-char *
-paddr_nz (CORE_ADDR addr)
-{
- return phex_nz (addr, gdbarch_addr_bit (current_gdbarch) / 8);
-}
-
const char *
-paddress (CORE_ADDR addr)
+paddress (struct gdbarch *gdbarch, CORE_ADDR addr)
{
/* Truncate address to the size of a target address, avoiding shifts
larger or equal than the width of a CORE_ADDR. The local
variable ADDR_BIT stops the compiler reporting a shift overflow
- when it won't occur. */
+ when it won't occur. */
/* NOTE: This assumes that the significant address information is
kept in the least significant bits of ADDR - the upper bits were
either zero or sign extended. Should gdbarch_address_to_pointer or
some ADDRESS_TO_PRINTABLE() be used to do the conversion? */
- int addr_bit = gdbarch_addr_bit (current_gdbarch);
+ int addr_bit = gdbarch_addr_bit (gdbarch);
if (addr_bit < (sizeof (CORE_ADDR) * HOST_CHAR_BIT))
addr &= ((CORE_ADDR) 1 << addr_bit) - 1;
return hex_string (addr);
}
+/* This function is described in "defs.h". */
+
+const char *
+print_core_address (struct gdbarch *gdbarch, CORE_ADDR address)
+{
+ int addr_bit = gdbarch_addr_bit (gdbarch);
+
+ if (addr_bit < (sizeof (CORE_ADDR) * HOST_CHAR_BIT))
+ address &= ((CORE_ADDR) 1 << addr_bit) - 1;
+
+ /* FIXME: cagney/2002-05-03: Need local_address_string() function
+ that returns the language localized string formatted to a width
+ based on gdbarch_addr_bit. */
+ if (addr_bit <= 32)
+ return hex_string_custom (address, 8);
+ else
+ return hex_string_custom (address, 16);
+}
+
static char *
decimal2str (char *sign, ULONGEST addr, int width)
{
/* Steal code from valprint.c:print_decimal(). Should this worry
- about the real size of addr as the above does? */
+ about the real size of addr as the above does? */
unsigned long temp[3];
char *str = get_cell ();
-
int i = 0;
+
do
{
temp[i] = addr % (1000 * 1000 * 1000);
{
unsigned long temp[3];
char *str = get_cell ();
-
int i = 0;
+
do
{
temp[i] = addr % (0100000 * 0100000);
}
char *
-paddr_u (CORE_ADDR addr)
+pulongest (ULONGEST u)
{
- return decimal2str ("", addr, 0);
+ return decimal2str ("", u, 0);
}
char *
-paddr_d (LONGEST addr)
+plongest (LONGEST l)
{
- if (addr < 0)
- return decimal2str ("-", -addr, 0);
+ if (l < 0)
+ return decimal2str ("-", -l, 0);
else
- return decimal2str ("", addr, 0);
+ return decimal2str ("", l, 0);
}
/* Eliminate warning from compiler on 32-bit systems. */
case 8:
{
unsigned long high = (unsigned long) (l >> thirty_two);
+
str = get_cell ();
if (high == 0)
xsnprintf (str, CELLSIZE, "%lx",
hex_string (LONGEST num)
{
char *result = get_cell ();
+
xsnprintf (result, CELLSIZE, "0x%s", phex_nz (num, sizeof (num)));
return result;
}
if (hex_len > width)
width = hex_len;
if (width + 2 >= CELLSIZE)
- internal_error (__FILE__, __LINE__,
- _("hex_string_custom: insufficient space to store result"));
+ internal_error (__FILE__, __LINE__, _("\
+hex_string_custom: insufficient space to store result"));
strcpy (result_end - width - 2, "0x");
memset (result_end - width, '0', width);
* otherwise VAL is interpreted as unsigned. If WIDTH is supplied,
* it is the minimum width (0-padded if needed). USE_C_FORMAT means
* to use C format in all cases. If it is false, then 'x'
- * and 'o' formats do not include a prefix (0x or leading 0). */
+ * and 'o' formats do not include a prefix (0x or leading 0). */
char *
int_string (LONGEST val, int radix, int is_signed, int width,
case 16:
{
char *result;
+
if (width == 0)
result = hex_string (val);
else
case 8:
{
char *result = octal2str (val, width);
+
if (use_c_format || val == 0)
return result;
else
core_addr_to_string (const CORE_ADDR addr)
{
char *str = get_cell ();
+
strcpy (str, "0x");
strcat (str, phex (addr, sizeof (addr)));
return str;
core_addr_to_string_nz (const CORE_ADDR addr)
{
char *str = get_cell ();
+
strcpy (str, "0x");
strcat (str, phex_nz (addr, sizeof (addr)));
return str;
CORE_ADDR
string_to_core_addr (const char *my_string)
{
- int addr_bit = gdbarch_addr_bit (current_gdbarch);
CORE_ADDR addr = 0;
if (my_string[0] == '0' && tolower (my_string[1]) == 'x')
{
/* Assume that it is in hex. */
int i;
+
for (i = 2; my_string[i] != '\0'; i++)
{
if (isdigit (my_string[i]))
else
error (_("invalid hex \"%s\""), my_string);
}
-
- /* Not very modular, but if the executable format expects
- addresses to be sign-extended, then do so if the address was
- specified with only 32 significant bits. Really this should
- be determined by the target architecture, not by the object
- file. */
- if (i - 2 == addr_bit / 4
- && exec_bfd
- && bfd_get_sign_extend_vma (exec_bfd))
- addr = (addr ^ ((CORE_ADDR) 1 << (addr_bit - 1)))
- - ((CORE_ADDR) 1 << (addr_bit - 1));
}
else
{
/* Assume that it is in decimal. */
int i;
+
for (i = 0; my_string[i] != '\0'; i++)
{
if (isdigit (my_string[i]))
return addr;
}
+const char *
+host_address_to_string (const void *addr)
+{
+ char *str = get_cell ();
+
+ xsnprintf (str, CELLSIZE, "0x%s", phex_nz ((uintptr_t) addr, sizeof (addr)));
+ return str;
+}
+
char *
gdb_realpath (const char *filename)
{
# endif
# if defined (USE_REALPATH)
const char *rp = realpath (filename, buf);
+
if (rp == NULL)
rp = filename;
return xstrdup (rp);
#if defined(HAVE_CANONICALIZE_FILE_NAME)
{
char *rp = canonicalize_file_name (filename);
+
if (rp == NULL)
return xstrdup (filename);
else
{
/* Find out the max path size. */
long path_max = pathconf ("/", _PC_PATH_MAX);
+
if (path_max > 0)
{
/* PATH_MAX is bounded. */
char *buf = alloca (path_max);
char *rp = realpath (filename, buf);
+
return xstrdup (rp ? rp : filename);
}
}
char *result;
/* Extract the basename of filename, and return immediately
- a copy of filename if it does not contain any directory prefix. */
+ a copy of filename if it does not contain any directory prefix. */
if (base_name == filename)
return xstrdup (filename);
dir_name = alloca ((size_t) (base_name - filename + 2));
/* Allocate enough space to store the dir_name + plus one extra
character sometimes needed under Windows (see below), and
- then the closing \000 character */
+ then the closing \000 character. */
strncpy (dir_name, filename, base_name - filename);
dir_name[base_name - filename] = '\000';
#endif
/* Canonicalize the directory prefix, and build the resulting
- filename. If the dirname realpath already contains an ending
+ filename. If the dirname realpath already contains an ending
directory separator, avoid doubling it. */
real_path = gdb_realpath (dir_name);
if (IS_DIR_SEPARATOR (real_path[strlen (real_path) - 1]))
- result = concat (real_path, base_name, (char *)NULL);
+ result = concat (real_path, base_name, (char *) NULL);
else
- result = concat (real_path, SLASH_STRING, base_name, (char *)NULL);
+ result = concat (real_path, SLASH_STRING, base_name, (char *) NULL);
xfree (real_path);
return result;
unsigned long
gnu_debuglink_crc32 (unsigned long crc, unsigned char *buf, size_t len)
{
- static const unsigned long crc32_table[256] = {
+ static const unsigned int crc32_table[256] = {
0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419,
0x706af48f, 0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4,
0xe0d5e91e, 0x97d2d988, 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07,
crc = ~crc & 0xffffffff;
for (end = buf + len; buf < end; ++buf)
crc = crc32_table[(crc ^ *buf) & 0xff] ^ (crc >> 8);
- return ~crc & 0xffffffff;;
+ return ~crc & 0xffffffff;
}
ULONGEST
{
unsigned int total = size * count;
void *ptr = obstack_alloc ((struct obstack *) data, total);
+
memset (ptr, 0, total);
return ptr;
}
dirname[base - filename] = '\0';
return dirname;
}
+
+/* Call libiberty's buildargv, and return the result.
+ If buildargv fails due to out-of-memory, call nomem.
+ Therefore, the returned value is guaranteed to be non-NULL,
+ unless the parameter itself is NULL. */
+
+char **
+gdb_buildargv (const char *s)
+{
+ char **argv = buildargv (s);
+
+ if (s != NULL && argv == NULL)
+ nomem (0);
+ return argv;
+}
+
+int
+compare_positive_ints (const void *ap, const void *bp)
+{
+ /* Because we know we're comparing two ints which are positive,
+ there's no danger of overflow here. */
+ return * (int *) ap - * (int *) bp;
+}
+
+#define AMBIGUOUS_MESS1 ".\nMatching formats:"
+#define AMBIGUOUS_MESS2 \
+ ".\nUse \"set gnutarget format-name\" to specify the format."
+
+const char *
+gdb_bfd_errmsg (bfd_error_type error_tag, char **matching)
+{
+ char *ret, *retp;
+ int ret_len;
+ char **p;
+
+ /* Check if errmsg just need simple return. */
+ if (error_tag != bfd_error_file_ambiguously_recognized || matching == NULL)
+ return bfd_errmsg (error_tag);
+
+ ret_len = strlen (bfd_errmsg (error_tag)) + strlen (AMBIGUOUS_MESS1)
+ + strlen (AMBIGUOUS_MESS2);
+ for (p = matching; *p; p++)
+ ret_len += strlen (*p) + 1;
+ ret = xmalloc (ret_len + 1);
+ retp = ret;
+ make_cleanup (xfree, ret);
+
+ strcpy (retp, bfd_errmsg (error_tag));
+ retp += strlen (retp);
+
+ strcpy (retp, AMBIGUOUS_MESS1);
+ retp += strlen (retp);
+
+ for (p = matching; *p; p++)
+ {
+ sprintf (retp, " %s", *p);
+ retp += strlen (retp);
+ }
+ xfree (matching);
+
+ strcpy (retp, AMBIGUOUS_MESS2);
+
+ return ret;
+}
+
+/* Return ARGS parsed as a valid pid, or throw an error. */
+
+int
+parse_pid_to_attach (char *args)
+{
+ unsigned long pid;
+ char *dummy;
+
+ if (!args)
+ error_no_arg (_("process-id to attach"));
+
+ dummy = args;
+ pid = strtoul (args, &dummy, 0);
+ /* Some targets don't set errno on errors, grrr! */
+ if ((pid == 0 && dummy == args) || dummy != &args[strlen (args)])
+ error (_("Illegal process-id: %s."), args);
+
+ return pid;
+}
+
+/* Provide a prototype to silence -Wmissing-prototypes. */
+extern initialize_file_ftype _initialize_utils;
+
+void
+_initialize_utils (void)
+{
+ add_internal_problem_command (&internal_error_problem);
+ add_internal_problem_command (&internal_warning_problem);
+}
projects / deliverable / binutils-gdb.git / blobdiff