/* General utility routines for GDB, the GNU debugger.
- Copyright 1986, 1989, 1990-1992, 1995, 1996, 1998, 2000, 2001
+ Copyright 1986, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
+ 1997, 1998, 1999, 2000, 2001
Free Software Foundation, Inc.
This file is part of GDB.
Boston, MA 02111-1307, USA. */
#include "defs.h"
+#include "gdb_assert.h"
#include <ctype.h>
#include "gdb_string.h"
#include "event-top.h"
#undef reg
#endif
-#include "signals.h"
+#include <signal.h>
#include "gdbcmd.h"
#include "serial.h"
#include "bfd.h"
#include <readline/readline.h>
+#ifndef MALLOC_INCOMPATIBLE
+#ifdef NEED_DECLARATION_MALLOC
+extern PTR malloc ();
+#endif
+#ifdef NEED_DECLARATION_REALLOC
+extern PTR realloc ();
+#endif
+#ifdef NEED_DECLARATION_FREE
+extern void free ();
+#endif
+#endif
+
#undef XMALLOC
#define XMALLOC(TYPE) ((TYPE*) xmalloc (sizeof (TYPE)))
static void
do_close_cleanup (void *arg)
{
- close ((int) arg);
+ int *fd = arg;
+ close (*fd);
+ xfree (fd);
}
struct cleanup *
make_cleanup_close (int fd)
{
- /* int into void*. Outch!! */
- return make_cleanup (do_close_cleanup, (void *) fd);
+ int *saved_fd = xmalloc (sizeof (fd));
+ *saved_fd = fd;
+ return make_cleanup (do_close_cleanup, saved_fd);
}
static void
{
void **location = ptr;
if (location == NULL)
- internal_error ("free_current_contents: NULL pointer");
+ internal_error (__FILE__, __LINE__,
+ "free_current_contents: NULL pointer");
if (*location != NULL)
{
xfree (*location);
want to continue, dump core, or just exit. */
NORETURN void
-internal_verror (const char *fmt, va_list ap)
+internal_verror (const char *file, int line,
+ const char *fmt, va_list ap)
{
static char msg[] = "Internal GDB error: recursive internal error.\n";
static int dejavu = 0;
case 1:
dejavu = 2;
fputs_unfiltered (msg, gdb_stderr);
- abort ();
+ internal_error (__FILE__, __LINE__, "failed internal consistency check");
default:
dejavu = 3;
write (STDERR_FILENO, msg, sizeof (msg));
/* Try to get the message out */
target_terminal_ours ();
- fputs_unfiltered ("gdb-internal-error: ", gdb_stderr);
+ fprintf_unfiltered (gdb_stderr, "%s:%d: gdb-internal-error: ", file, line);
vfprintf_unfiltered (gdb_stderr, fmt, ap);
fputs_unfiltered ("\n", gdb_stderr);
if (dump_core_p)
{
if (fork () == 0)
- abort ();
+ internal_error (__FILE__, __LINE__, "failed internal consistency check");
}
}
else
{
if (dump_core_p)
- abort ();
+ internal_error (__FILE__, __LINE__, "failed internal consistency check");
else
exit (1);
}
}
NORETURN void
-internal_error (char *string, ...)
+internal_error (const char *file, int line, const char *string, ...)
{
va_list ap;
va_start (ap, string);
- internal_verror (string, ap);
+ internal_verror (file, line, string, ap);
va_end (ap);
}
void
quit (void)
{
- serial_t gdb_stdout_serial = serial_fdopen (1);
+ struct serial *gdb_stdout_serial = serial_fdopen (1);
target_terminal_ours ();
gdb_flush (gdb_stderr);
/* 3. The system-level buffer. */
- SERIAL_DRAIN_OUTPUT (gdb_stdout_serial);
- SERIAL_UN_FDOPEN (gdb_stdout_serial);
+ serial_drain_output (gdb_stdout_serial);
+ serial_un_fdopen (gdb_stdout_serial);
annotate_error_begin ();
return_to_top_level (RETURN_QUIT);
}
-
-#if defined(_MSC_VER) /* should test for wingdb instead? */
-
-/*
- * Windows translates all keyboard and mouse events
- * into a message which is appended to the message
- * queue for the process.
- */
-
-void
-notice_quit (void)
-{
- int k = win32pollquit ();
- if (k == 1)
- quit_flag = 1;
- else if (k == 2)
- immediate_quit = 1;
-}
-
-#else /* !defined(_MSC_VER) */
-
-void
-notice_quit (void)
-{
- /* Done by signals */
-}
-
-#endif /* !defined(_MSC_VER) */
-
/* Control C comes here */
void
request_quit (int signo)
\f
/* Memory management stuff (malloc friends). */
-/* Make a substitute size_t for non-ANSI compilers. */
-
-#ifndef HAVE_STDDEF_H
-#ifndef size_t
-#define size_t unsigned int
-#endif
-#endif
-
#if !defined (USE_MMALLOC)
-PTR
-mcalloc (PTR md, size_t number, size_t size)
-{
- return calloc (number, size);
-}
+/* NOTE: These must use PTR so that their definition matches the
+ declaration found in "mmalloc.h". */
PTR
mmalloc (PTR md, size_t size)
{
- return malloc (size);
+ return malloc (size); /* NOTE: GDB's only call to malloc() */
}
PTR
mrealloc (PTR md, PTR ptr, size_t size)
{
if (ptr == 0) /* Guard against old realloc's */
- return malloc (size);
+ return mmalloc (md, size);
else
- return realloc (ptr, size);
+ return realloc (ptr, size); /* NOTE: GDB's only call to ralloc() */
+}
+
+PTR
+mcalloc (PTR md, size_t number, size_t size)
+{
+ return calloc (number, size); /* NOTE: GDB's only call to calloc() */
}
void
mfree (PTR md, PTR ptr)
{
- xfree (ptr);
+ free (ptr); /* NOTE: GDB's only call to free() */
}
#endif /* USE_MMALLOC */
malloc_botch (void)
{
fprintf_unfiltered (gdb_stderr, "Memory corruption\n");
- abort ();
+ internal_error (__FILE__, __LINE__, "failed internal consistency check");
}
/* Attempt to install hooks in mmalloc/mrealloc/mfree for the heap specified
{
if (size > 0)
{
- internal_error ("virtual memory exhausted: can't allocate %ld bytes.", size);
+ internal_error (__FILE__, __LINE__,
+ "virtual memory exhausted: can't allocate %ld bytes.", size);
}
else
{
- internal_error ("virtual memory exhausted.");
+ internal_error (__FILE__, __LINE__,
+ "virtual memory exhausted.");
}
}
-/* Like mmalloc but get error if no storage available, and protect against
- the caller wanting to allocate zero bytes. Whether to return NULL for
- a zero byte request, or translate the request into a request for one
- byte of zero'd storage, is a religious issue. */
+/* The xmmalloc() family of memory management routines.
-PTR
-xmmalloc (PTR md, long size)
+ These are are like the mmalloc() family except that they implement
+ consistent semantics and guard against typical memory management
+ problems: if a malloc fails, an internal error is thrown; if
+ free(NULL) is called, it is ignored; if *alloc(0) is called, NULL
+ is returned.
+
+ All these routines are implemented using the mmalloc() family. */
+
+void *
+xmmalloc (void *md, size_t size)
{
- register PTR val;
+ void *val;
if (size == 0)
{
val = NULL;
}
- else if ((val = mmalloc (md, size)) == NULL)
+ else
{
- nomem (size);
+ val = mmalloc (md, size);
+ if (val == NULL)
+ nomem (size);
}
return (val);
}
-/* Like mrealloc but get error if no storage available. */
-
-PTR
-xmrealloc (PTR md, PTR ptr, long size)
+void *
+xmrealloc (void *md, void *ptr, size_t size)
{
- register PTR val;
+ void *val;
- if (ptr != NULL)
+ if (size == 0)
{
- val = mrealloc (md, ptr, size);
+ if (ptr != NULL)
+ mfree (md, ptr);
+ val = NULL;
}
else
{
- val = mmalloc (md, size);
- }
- if (val == NULL)
- {
- nomem (size);
+ if (ptr != NULL)
+ {
+ val = mrealloc (md, ptr, size);
+ }
+ else
+ {
+ val = mmalloc (md, size);
+ }
+ if (val == NULL)
+ {
+ nomem (size);
+ }
}
return (val);
}
-/* Like malloc but get error if no storage available, and protect against
- the caller wanting to allocate zero bytes. */
+void *
+xmcalloc (void *md, size_t number, size_t size)
+{
+ void *mem;
+ if (number == 0 || size == 0)
+ mem = NULL;
+ else
+ {
+ mem = mcalloc (md, number, size);
+ if (mem == NULL)
+ nomem (number * size);
+ }
+ return mem;
+}
-PTR
-xmalloc (size_t size)
+void
+xmfree (void *md, void *ptr)
{
- return (xmmalloc ((PTR) NULL, size));
+ if (ptr != NULL)
+ mfree (md, ptr);
}
-/* Like calloc but get error if no storage available */
+/* The xmalloc() (libiberty.h) family of memory management routines.
+
+ These are like the ISO-C malloc() family except that they implement
+ consistent semantics and guard against typical memory management
+ problems. See xmmalloc() above for further information.
+
+ All these routines are wrappers to the xmmalloc() family. */
+
+/* NOTE: These are declared using PTR to ensure consistency with
+ "libiberty.h". xfree() is GDB local. */
PTR
-xcalloc (size_t number, size_t size)
+xmalloc (size_t size)
{
- void *mem = mcalloc (NULL, number, size);
- if (mem == NULL)
- nomem (number * size);
- return mem;
+ return xmmalloc (NULL, size);
}
-/* Like mrealloc but get error if no storage available. */
-
PTR
xrealloc (PTR ptr, size_t size)
{
- return (xmrealloc ((PTR) NULL, ptr, size));
+ return xmrealloc (NULL, ptr, size);
}
-/* Free up space allocated by one of xmalloc(), xcalloc(), or
- xrealloc(). */
+PTR
+xcalloc (size_t number, size_t size)
+{
+ return xmcalloc (NULL, number, size);
+}
void
xfree (void *ptr)
{
- if (ptr != NULL)
- free (ptr);
+ xmfree (NULL, ptr);
}
\f
/* NULL could be returned due to a memory allocation problem; a
badly format string; or something else. */
if ((*ret) == NULL)
- internal_error ("%s:%d: vasprintf returned NULL buffer (errno %d)",
- __FILE__, __LINE__, errno);
+ internal_error (__FILE__, __LINE__,
+ "vasprintf returned NULL buffer (errno %d)",
+ errno);
/* A negative status with a non-NULL buffer shouldn't never
happen. But to be sure. */
if (status < 0)
- internal_error ("%s:%d: vasprintf call failed (errno %d)",
- __FILE__, __LINE__, errno);
+ internal_error (__FILE__, __LINE__,
+ "vasprintf call failed (errno %d)",
+ errno);
}
Uses malloc to get the space. Returns the address of the copy. */
char *
-savestring (const char *ptr, int size)
+savestring (const char *ptr, size_t size)
{
register char *p = (char *) xmalloc (size + 1);
memcpy (p, ptr, size);
}
char *
-msavestring (void *md, const char *ptr, int size)
+msavestring (void *md, const char *ptr, size_t size)
{
register char *p = (char *) xmmalloc (md, size + 1);
memcpy (p, ptr, size);
/* Automatically answer "yes" if input is not from a terminal. */
if (!input_from_terminal_p ())
return 1;
-#ifdef MPW
- /* FIXME Automatically answer "yes" if called from MacGDB. */
- if (mac_app)
- return 1;
-#endif /* MPW */
+ /* OBSOLETE #ifdef MPW */
+ /* OBSOLETE *//* FIXME Automatically answer "yes" if called from MacGDB. */
+ /* OBSOLETE if (mac_app) */
+ /* OBSOLETE return 1; */
+ /* OBSOLETE #endif *//* MPW */
while (1)
{
if (annotation_level > 1)
printf_filtered ("\n\032\032query\n");
-#ifdef MPW
- /* If not in MacGDB, move to a new line so the entered line doesn't
- have a prompt on the front of it. */
- if (!mac_app)
- fputs_unfiltered ("\n", gdb_stdout);
-#endif /* MPW */
+ /* OBSOLETE #ifdef MPW */
+ /* OBSOLETE *//* If not in MacGDB, move to a new line so the entered line doesn't */
+ /* OBSOLETE have a prompt on the front of it. */
+ /* OBSOLETE if (!mac_app) */
+ /* OBSOLETE fputs_unfiltered ("\n", gdb_stdout); */
+ /* OBSOLETE #endif *//* MPW */
wrap_here ("");
gdb_flush (gdb_stdout);
-#if defined(TUI)
- if (!tui_version || cmdWin == tuiWinWithFocus ())
-#endif
- answer = fgetc (stdin);
-#if defined(TUI)
- else
- answer = (unsigned char) tuiBufferGetc ();
-
-#endif
+ answer = fgetc (stdin);
clearerr (stdin); /* in case of C-d */
if (answer == EOF) /* C-d */
{
break;
}
/* Eat rest of input line, to EOF or newline */
- if ((answer != '\n') || (tui_version && answer != '\r'))
+ if (answer != '\n')
do
{
-#if defined(TUI)
- if (!tui_version || cmdWin == tuiWinWithFocus ())
-#endif
- ans2 = fgetc (stdin);
-#if defined(TUI)
- else
- ans2 = (unsigned char) tuiBufferGetc ();
-#endif
+ ans2 = fgetc (stdin);
clearerr (stdin);
}
while (ans2 != EOF && ans2 != '\n' && ans2 != '\r');
- TUIDO (((TuiOpaqueFuncPtr) tui_vStartNewLines, 1));
if (answer >= 'a')
answer -= 040;
init_page_info (void)
{
#if defined(TUI)
- if (tui_version && m_winPtrNotNull (cmdWin))
- {
- lines_per_page = cmdWin->generic.height;
- chars_per_line = cmdWin->generic.width;
- }
- else
+ if (!tui_get_command_dimension (&chars_per_line, &lines_per_page))
#endif
{
/* These defaults will be used if we are unable to get the correct
lines_per_page = 24;
chars_per_line = 80;
-#if !defined (MPW) && !defined (_WIN32)
+#if !defined (_WIN32)
/* No termcap under MPW, although might be cool to do something
by looking at worksheet or console window sizes. */
/* Initialize the screen height and width from termcap. */
{
/* This should have been allocated, but be paranoid anyway. */
if (!wrap_buffer)
- abort ();
+ internal_error (__FILE__, __LINE__, "failed internal consistency check");
if (wrap_buffer[0])
{
return c;
}
+/* Write character C to gdb_stdout using GDB's paging mechanism and return C.
+ May return nonlocally. */
+
+int
+putchar_filtered (int c)
+{
+ return fputc_filtered (c, gdb_stdout);
+}
+
int
fputc_unfiltered (int c, struct ui_file *stream)
{
#ifdef SIGWINCH_HANDLER_BODY
SIGWINCH_HANDLER_BODY
#endif
-\f
-/* Support for converting target fp numbers into host DOUBLEST format. */
-
-/* XXX - This code should really be in libiberty/floatformat.c, however
- configuration issues with libiberty made this very difficult to do in the
- available time. */
-
-#include "floatformat.h"
-#include <math.h> /* ldexp */
-
-/* The odds that CHAR_BIT will be anything but 8 are low enough that I'm not
- going to bother with trying to muck around with whether it is defined in
- a system header, what we do if not, etc. */
-#define FLOATFORMAT_CHAR_BIT 8
-
-static unsigned long get_field (unsigned char *,
- enum floatformat_byteorders,
- unsigned int, unsigned int, unsigned int);
-
-/* Extract a field which starts at START and is LEN bytes long. DATA and
- TOTAL_LEN are the thing we are extracting it from, in byteorder ORDER. */
-static unsigned long
-get_field (unsigned char *data, enum floatformat_byteorders order,
- unsigned int total_len, unsigned int start, unsigned int len)
-{
- unsigned long result;
- unsigned int cur_byte;
- int cur_bitshift;
-
- /* Start at the least significant part of the field. */
- if (order == floatformat_little || order == floatformat_littlebyte_bigword)
- {
- /* We start counting from the other end (i.e, from the high bytes
- rather than the low bytes). As such, we need to be concerned
- with what happens if bit 0 doesn't start on a byte boundary.
- I.e, we need to properly handle the case where total_len is
- not evenly divisible by 8. So we compute ``excess'' which
- represents the number of bits from the end of our starting
- byte needed to get to bit 0. */
- int excess = FLOATFORMAT_CHAR_BIT - (total_len % FLOATFORMAT_CHAR_BIT);
- cur_byte = (total_len / FLOATFORMAT_CHAR_BIT)
- - ((start + len + excess) / FLOATFORMAT_CHAR_BIT);
- cur_bitshift = ((start + len + excess) % FLOATFORMAT_CHAR_BIT)
- - FLOATFORMAT_CHAR_BIT;
- }
- else
- {
- cur_byte = (start + len) / FLOATFORMAT_CHAR_BIT;
- cur_bitshift =
- ((start + len) % FLOATFORMAT_CHAR_BIT) - FLOATFORMAT_CHAR_BIT;
- }
- if (cur_bitshift > -FLOATFORMAT_CHAR_BIT)
- result = *(data + cur_byte) >> (-cur_bitshift);
- else
- result = 0;
- cur_bitshift += FLOATFORMAT_CHAR_BIT;
- if (order == floatformat_little || order == floatformat_littlebyte_bigword)
- ++cur_byte;
- else
- --cur_byte;
-
- /* Move towards the most significant part of the field. */
- while (cur_bitshift < len)
- {
- result |= (unsigned long)*(data + cur_byte) << cur_bitshift;
- cur_bitshift += FLOATFORMAT_CHAR_BIT;
- if (order == floatformat_little || order == floatformat_littlebyte_bigword)
- ++cur_byte;
- else
- --cur_byte;
- }
- if (len < sizeof(result) * FLOATFORMAT_CHAR_BIT)
- /* Mask out bits which are not part of the field */
- result &= ((1UL << len) - 1);
- return result;
-}
-
-/* Convert from FMT to a DOUBLEST.
- FROM is the address of the extended float.
- Store the DOUBLEST in *TO. */
-
-void
-floatformat_to_doublest (const struct floatformat *fmt, char *from,
- DOUBLEST *to)
-{
- unsigned char *ufrom = (unsigned char *) from;
- DOUBLEST dto;
- long exponent;
- unsigned long mant;
- unsigned int mant_bits, mant_off;
- int mant_bits_left;
- int special_exponent; /* It's a NaN, denorm or zero */
-
- /* If the mantissa bits are not contiguous from one end of the
- mantissa to the other, we need to make a private copy of the
- source bytes that is in the right order since the unpacking
- algorithm assumes that the bits are contiguous.
-
- Swap the bytes individually rather than accessing them through
- "long *" since we have no guarantee that they start on a long
- alignment, and also sizeof(long) for the host could be different
- than sizeof(long) for the target. FIXME: Assumes sizeof(long)
- for the target is 4. */
-
- if (fmt->byteorder == floatformat_littlebyte_bigword)
- {
- static unsigned char *newfrom;
- unsigned char *swapin, *swapout;
- int longswaps;
-
- longswaps = fmt->totalsize / FLOATFORMAT_CHAR_BIT;
- longswaps >>= 3;
-
- if (newfrom == NULL)
- {
- newfrom = (unsigned char *) xmalloc (fmt->totalsize);
- }
- swapout = newfrom;
- swapin = ufrom;
- ufrom = newfrom;
- while (longswaps-- > 0)
- {
- /* This is ugly, but efficient */
- *swapout++ = swapin[4];
- *swapout++ = swapin[5];
- *swapout++ = swapin[6];
- *swapout++ = swapin[7];
- *swapout++ = swapin[0];
- *swapout++ = swapin[1];
- *swapout++ = swapin[2];
- *swapout++ = swapin[3];
- swapin += 8;
- }
- }
-
- exponent = get_field (ufrom, fmt->byteorder, fmt->totalsize,
- fmt->exp_start, fmt->exp_len);
- /* Note that if exponent indicates a NaN, we can't really do anything useful
- (not knowing if the host has NaN's, or how to build one). So it will
- end up as an infinity or something close; that is OK. */
-
- mant_bits_left = fmt->man_len;
- mant_off = fmt->man_start;
- dto = 0.0;
-
- special_exponent = exponent == 0 || exponent == fmt->exp_nan;
-
-/* Don't bias NaNs. Use minimum exponent for denorms. For simplicity,
- we don't check for zero as the exponent doesn't matter. */
- if (!special_exponent)
- exponent -= fmt->exp_bias;
- else if (exponent == 0)
- exponent = 1 - fmt->exp_bias;
-
- /* Build the result algebraically. Might go infinite, underflow, etc;
- who cares. */
-
-/* If this format uses a hidden bit, explicitly add it in now. Otherwise,
- increment the exponent by one to account for the integer bit. */
-
- if (!special_exponent)
- {
- if (fmt->intbit == floatformat_intbit_no)
- dto = ldexp (1.0, exponent);
- else
- exponent++;
- }
-
- while (mant_bits_left > 0)
- {
- mant_bits = min (mant_bits_left, 32);
-
- mant = get_field (ufrom, fmt->byteorder, fmt->totalsize,
- mant_off, mant_bits);
-
- dto += ldexp ((double) mant, exponent - mant_bits);
- exponent -= mant_bits;
- mant_off += mant_bits;
- mant_bits_left -= mant_bits;
- }
-
- /* Negate it if negative. */
- if (get_field (ufrom, fmt->byteorder, fmt->totalsize, fmt->sign_start, 1))
- dto = -dto;
- *to = dto;
-}
-\f
-static void put_field (unsigned char *, enum floatformat_byteorders,
- unsigned int,
- unsigned int, unsigned int, unsigned long);
-
-/* Set a field which starts at START and is LEN bytes long. DATA and
- TOTAL_LEN are the thing we are extracting it from, in byteorder ORDER. */
-static void
-put_field (unsigned char *data, enum floatformat_byteorders order,
- unsigned int total_len, unsigned int start, unsigned int len,
- unsigned long stuff_to_put)
-{
- unsigned int cur_byte;
- int cur_bitshift;
-
- /* Start at the least significant part of the field. */
- if (order == floatformat_little || order == floatformat_littlebyte_bigword)
- {
- int excess = FLOATFORMAT_CHAR_BIT - (total_len % FLOATFORMAT_CHAR_BIT);
- cur_byte = (total_len / FLOATFORMAT_CHAR_BIT)
- - ((start + len + excess) / FLOATFORMAT_CHAR_BIT);
- cur_bitshift = ((start + len + excess) % FLOATFORMAT_CHAR_BIT)
- - FLOATFORMAT_CHAR_BIT;
- }
- else
- {
- cur_byte = (start + len) / FLOATFORMAT_CHAR_BIT;
- cur_bitshift =
- ((start + len) % FLOATFORMAT_CHAR_BIT) - FLOATFORMAT_CHAR_BIT;
- }
- if (cur_bitshift > -FLOATFORMAT_CHAR_BIT)
- {
- *(data + cur_byte) &=
- ~(((1 << ((start + len) % FLOATFORMAT_CHAR_BIT)) - 1)
- << (-cur_bitshift));
- *(data + cur_byte) |=
- (stuff_to_put & ((1 << FLOATFORMAT_CHAR_BIT) - 1)) << (-cur_bitshift);
- }
- cur_bitshift += FLOATFORMAT_CHAR_BIT;
- if (order == floatformat_little || order == floatformat_littlebyte_bigword)
- ++cur_byte;
- else
- --cur_byte;
-
- /* Move towards the most significant part of the field. */
- while (cur_bitshift < len)
- {
- if (len - cur_bitshift < FLOATFORMAT_CHAR_BIT)
- {
- /* This is the last byte. */
- *(data + cur_byte) &=
- ~((1 << (len - cur_bitshift)) - 1);
- *(data + cur_byte) |= (stuff_to_put >> cur_bitshift);
- }
- else
- *(data + cur_byte) = ((stuff_to_put >> cur_bitshift)
- & ((1 << FLOATFORMAT_CHAR_BIT) - 1));
- cur_bitshift += FLOATFORMAT_CHAR_BIT;
- if (order == floatformat_little || order == floatformat_littlebyte_bigword)
- ++cur_byte;
- else
- --cur_byte;
- }
-}
-
-#ifdef HAVE_LONG_DOUBLE
-/* Return the fractional part of VALUE, and put the exponent of VALUE in *EPTR.
- The range of the returned value is >= 0.5 and < 1.0. This is equivalent to
- frexp, but operates on the long double data type. */
-
-static long double ldfrexp (long double value, int *eptr);
-
-static long double
-ldfrexp (long double value, int *eptr)
-{
- long double tmp;
- int exp;
-
- /* Unfortunately, there are no portable functions for extracting the exponent
- of a long double, so we have to do it iteratively by multiplying or dividing
- by two until the fraction is between 0.5 and 1.0. */
-
- if (value < 0.0l)
- value = -value;
-
- tmp = 1.0l;
- exp = 0;
-
- if (value >= tmp) /* Value >= 1.0 */
- while (value >= tmp)
- {
- tmp *= 2.0l;
- exp++;
- }
- else if (value != 0.0l) /* Value < 1.0 and > 0.0 */
- {
- while (value < tmp)
- {
- tmp /= 2.0l;
- exp--;
- }
- tmp *= 2.0l;
- exp++;
- }
-
- *eptr = exp;
- return value / tmp;
-}
-#endif /* HAVE_LONG_DOUBLE */
-
-
-/* The converse: convert the DOUBLEST *FROM to an extended float
- and store where TO points. Neither FROM nor TO have any alignment
- restrictions. */
-
-void
-floatformat_from_doublest (CONST struct floatformat *fmt, DOUBLEST *from,
- char *to)
-{
- DOUBLEST dfrom;
- int exponent;
- DOUBLEST mant;
- unsigned int mant_bits, mant_off;
- int mant_bits_left;
- unsigned char *uto = (unsigned char *) to;
-
- memcpy (&dfrom, from, sizeof (dfrom));
- memset (uto, 0, (fmt->totalsize + FLOATFORMAT_CHAR_BIT - 1)
- / FLOATFORMAT_CHAR_BIT);
- if (dfrom == 0)
- return; /* Result is zero */
- if (dfrom != dfrom) /* Result is NaN */
- {
- /* From is NaN */
- put_field (uto, fmt->byteorder, fmt->totalsize, fmt->exp_start,
- fmt->exp_len, fmt->exp_nan);
- /* Be sure it's not infinity, but NaN value is irrel */
- put_field (uto, fmt->byteorder, fmt->totalsize, fmt->man_start,
- 32, 1);
- return;
- }
-
- /* If negative, set the sign bit. */
- if (dfrom < 0)
- {
- put_field (uto, fmt->byteorder, fmt->totalsize, fmt->sign_start, 1, 1);
- dfrom = -dfrom;
- }
-
- if (dfrom + dfrom == dfrom && dfrom != 0.0) /* Result is Infinity */
- {
- /* Infinity exponent is same as NaN's. */
- put_field (uto, fmt->byteorder, fmt->totalsize, fmt->exp_start,
- fmt->exp_len, fmt->exp_nan);
- /* Infinity mantissa is all zeroes. */
- put_field (uto, fmt->byteorder, fmt->totalsize, fmt->man_start,
- fmt->man_len, 0);
- return;
- }
-
-#ifdef HAVE_LONG_DOUBLE
- mant = ldfrexp (dfrom, &exponent);
-#else
- mant = frexp (dfrom, &exponent);
-#endif
-
- put_field (uto, fmt->byteorder, fmt->totalsize, fmt->exp_start, fmt->exp_len,
- exponent + fmt->exp_bias - 1);
-
- mant_bits_left = fmt->man_len;
- mant_off = fmt->man_start;
- while (mant_bits_left > 0)
- {
- unsigned long mant_long;
- mant_bits = mant_bits_left < 32 ? mant_bits_left : 32;
-
- mant *= 4294967296.0;
- mant_long = ((unsigned long) mant) & 0xffffffffL;
- mant -= mant_long;
-
- /* If the integer bit is implicit, then we need to discard it.
- If we are discarding a zero, we should be (but are not) creating
- a denormalized number which means adjusting the exponent
- (I think). */
- if (mant_bits_left == fmt->man_len
- && fmt->intbit == floatformat_intbit_no)
- {
- mant_long <<= 1;
- mant_long &= 0xffffffffL;
- mant_bits -= 1;
- }
-
- if (mant_bits < 32)
- {
- /* The bits we want are in the most significant MANT_BITS bits of
- mant_long. Move them to the least significant. */
- mant_long >>= 32 - mant_bits;
- }
-
- put_field (uto, fmt->byteorder, fmt->totalsize,
- mant_off, mant_bits, mant_long);
- mant_off += mant_bits;
- mant_bits_left -= mant_bits;
- }
- if (fmt->byteorder == floatformat_littlebyte_bigword)
- {
- int count;
- unsigned char *swaplow = uto;
- unsigned char *swaphigh = uto + 4;
- unsigned char tmp;
-
- for (count = 0; count < 4; count++)
- {
- tmp = *swaplow;
- *swaplow++ = *swaphigh;
- *swaphigh++ = tmp;
- }
- }
-}
/* print routines to handle variable size regs, etc. */
sign, temp[2], temp[1], temp[0]);
break;
default:
- abort ();
+ internal_error (__FILE__, __LINE__, "failed internal consistency check");
}
}
CORE_ADDR
host_pointer_to_address (void *ptr)
{
- if (sizeof (ptr) != TYPE_LENGTH (builtin_type_ptr))
- internal_error ("core_addr_to_void_ptr: bad cast");
- return POINTER_TO_ADDRESS (builtin_type_ptr, &ptr);
+ if (sizeof (ptr) != TYPE_LENGTH (builtin_type_void_data_ptr))
+ internal_error (__FILE__, __LINE__,
+ "core_addr_to_void_ptr: bad cast");
+ return POINTER_TO_ADDRESS (builtin_type_void_data_ptr, &ptr);
}
void *
address_to_host_pointer (CORE_ADDR addr)
{
void *ptr;
- if (sizeof (ptr) != TYPE_LENGTH (builtin_type_ptr))
- internal_error ("core_addr_to_void_ptr: bad cast");
- ADDRESS_TO_POINTER (builtin_type_ptr, &ptr, addr);
+ if (sizeof (ptr) != TYPE_LENGTH (builtin_type_void_data_ptr))
+ internal_error (__FILE__, __LINE__,
+ "core_addr_to_void_ptr: bad cast");
+ ADDRESS_TO_POINTER (builtin_type_void_data_ptr, &ptr, addr);
return ptr;
}
projects / deliverable / binutils-gdb.git / blobdiff