gdb_flush (gdb_stderr);
/* 3. The system-level buffer. */
- SERIAL_DRAIN_OUTPUT (gdb_stdout_serial);
- SERIAL_UN_FDOPEN (gdb_stdout_serial);
+ serial_drain_output (gdb_stdout_serial);
+ serial_un_fdopen (gdb_stdout_serial);
annotate_error_begin ();
wrap_here ("");
gdb_flush (gdb_stdout);
-#if defined(TUI)
- if (!tui_version || cmdWin == tuiWinWithFocus ())
-#endif
- answer = fgetc (stdin);
-#if defined(TUI)
- else
- answer = (unsigned char) tuiBufferGetc ();
-
-#endif
+ answer = fgetc (stdin);
clearerr (stdin); /* in case of C-d */
if (answer == EOF) /* C-d */
{
break;
}
/* Eat rest of input line, to EOF or newline */
- if ((answer != '\n') || (tui_version && answer != '\r'))
+ if (answer != '\n')
do
{
-#if defined(TUI)
- if (!tui_version || cmdWin == tuiWinWithFocus ())
-#endif
- ans2 = fgetc (stdin);
-#if defined(TUI)
- else
- ans2 = (unsigned char) tuiBufferGetc ();
-#endif
+ ans2 = fgetc (stdin);
clearerr (stdin);
}
while (ans2 != EOF && ans2 != '\n' && ans2 != '\r');
- TUIDO (((TuiOpaqueFuncPtr) tui_vStartNewLines, 1));
if (answer >= 'a')
answer -= 040;
init_page_info (void)
{
#if defined(TUI)
- if (tui_version && m_winPtrNotNull (cmdWin))
- {
- lines_per_page = cmdWin->generic.height;
- chars_per_line = cmdWin->generic.width;
- }
- else
+ if (!tui_get_command_dimension (&chars_per_line, &lines_per_page))
#endif
{
/* These defaults will be used if we are unable to get the correct
#ifdef SIGWINCH_HANDLER_BODY
SIGWINCH_HANDLER_BODY
#endif
-\f
-/* Support for converting target fp numbers into host DOUBLEST format. */
-
-/* XXX - This code should really be in libiberty/floatformat.c, however
- configuration issues with libiberty made this very difficult to do in the
- available time. */
-
-#include "floatformat.h"
-#include <math.h> /* ldexp */
-
-/* The odds that CHAR_BIT will be anything but 8 are low enough that I'm not
- going to bother with trying to muck around with whether it is defined in
- a system header, what we do if not, etc. */
-#define FLOATFORMAT_CHAR_BIT 8
-
-static unsigned long get_field (unsigned char *,
- enum floatformat_byteorders,
- unsigned int, unsigned int, unsigned int);
-
-/* Extract a field which starts at START and is LEN bytes long. DATA and
- TOTAL_LEN are the thing we are extracting it from, in byteorder ORDER. */
-static unsigned long
-get_field (unsigned char *data, enum floatformat_byteorders order,
- unsigned int total_len, unsigned int start, unsigned int len)
-{
- unsigned long result;
- unsigned int cur_byte;
- int cur_bitshift;
-
- /* Start at the least significant part of the field. */
- if (order == floatformat_little || order == floatformat_littlebyte_bigword)
- {
- /* We start counting from the other end (i.e, from the high bytes
- rather than the low bytes). As such, we need to be concerned
- with what happens if bit 0 doesn't start on a byte boundary.
- I.e, we need to properly handle the case where total_len is
- not evenly divisible by 8. So we compute ``excess'' which
- represents the number of bits from the end of our starting
- byte needed to get to bit 0. */
- int excess = FLOATFORMAT_CHAR_BIT - (total_len % FLOATFORMAT_CHAR_BIT);
- cur_byte = (total_len / FLOATFORMAT_CHAR_BIT)
- - ((start + len + excess) / FLOATFORMAT_CHAR_BIT);
- cur_bitshift = ((start + len + excess) % FLOATFORMAT_CHAR_BIT)
- - FLOATFORMAT_CHAR_BIT;
- }
- else
- {
- cur_byte = (start + len) / FLOATFORMAT_CHAR_BIT;
- cur_bitshift =
- ((start + len) % FLOATFORMAT_CHAR_BIT) - FLOATFORMAT_CHAR_BIT;
- }
- if (cur_bitshift > -FLOATFORMAT_CHAR_BIT)
- result = *(data + cur_byte) >> (-cur_bitshift);
- else
- result = 0;
- cur_bitshift += FLOATFORMAT_CHAR_BIT;
- if (order == floatformat_little || order == floatformat_littlebyte_bigword)
- ++cur_byte;
- else
- --cur_byte;
-
- /* Move towards the most significant part of the field. */
- while (cur_bitshift < len)
- {
- result |= (unsigned long)*(data + cur_byte) << cur_bitshift;
- cur_bitshift += FLOATFORMAT_CHAR_BIT;
- if (order == floatformat_little || order == floatformat_littlebyte_bigword)
- ++cur_byte;
- else
- --cur_byte;
- }
- if (len < sizeof(result) * FLOATFORMAT_CHAR_BIT)
- /* Mask out bits which are not part of the field */
- result &= ((1UL << len) - 1);
- return result;
-}
-
-/* Convert from FMT to a DOUBLEST.
- FROM is the address of the extended float.
- Store the DOUBLEST in *TO. */
-
-void
-floatformat_to_doublest (const struct floatformat *fmt, char *from,
- DOUBLEST *to)
-{
- unsigned char *ufrom = (unsigned char *) from;
- DOUBLEST dto;
- long exponent;
- unsigned long mant;
- unsigned int mant_bits, mant_off;
- int mant_bits_left;
- int special_exponent; /* It's a NaN, denorm or zero */
-
- /* If the mantissa bits are not contiguous from one end of the
- mantissa to the other, we need to make a private copy of the
- source bytes that is in the right order since the unpacking
- algorithm assumes that the bits are contiguous.
-
- Swap the bytes individually rather than accessing them through
- "long *" since we have no guarantee that they start on a long
- alignment, and also sizeof(long) for the host could be different
- than sizeof(long) for the target. FIXME: Assumes sizeof(long)
- for the target is 4. */
-
- if (fmt->byteorder == floatformat_littlebyte_bigword)
- {
- static unsigned char *newfrom;
- unsigned char *swapin, *swapout;
- int longswaps;
-
- longswaps = fmt->totalsize / FLOATFORMAT_CHAR_BIT;
- longswaps >>= 3;
-
- if (newfrom == NULL)
- {
- newfrom = (unsigned char *) xmalloc (fmt->totalsize);
- }
- swapout = newfrom;
- swapin = ufrom;
- ufrom = newfrom;
- while (longswaps-- > 0)
- {
- /* This is ugly, but efficient */
- *swapout++ = swapin[4];
- *swapout++ = swapin[5];
- *swapout++ = swapin[6];
- *swapout++ = swapin[7];
- *swapout++ = swapin[0];
- *swapout++ = swapin[1];
- *swapout++ = swapin[2];
- *swapout++ = swapin[3];
- swapin += 8;
- }
- }
-
- exponent = get_field (ufrom, fmt->byteorder, fmt->totalsize,
- fmt->exp_start, fmt->exp_len);
- /* Note that if exponent indicates a NaN, we can't really do anything useful
- (not knowing if the host has NaN's, or how to build one). So it will
- end up as an infinity or something close; that is OK. */
-
- mant_bits_left = fmt->man_len;
- mant_off = fmt->man_start;
- dto = 0.0;
-
- special_exponent = exponent == 0 || exponent == fmt->exp_nan;
-
-/* Don't bias NaNs. Use minimum exponent for denorms. For simplicity,
- we don't check for zero as the exponent doesn't matter. */
- if (!special_exponent)
- exponent -= fmt->exp_bias;
- else if (exponent == 0)
- exponent = 1 - fmt->exp_bias;
-
- /* Build the result algebraically. Might go infinite, underflow, etc;
- who cares. */
-
-/* If this format uses a hidden bit, explicitly add it in now. Otherwise,
- increment the exponent by one to account for the integer bit. */
-
- if (!special_exponent)
- {
- if (fmt->intbit == floatformat_intbit_no)
- dto = ldexp (1.0, exponent);
- else
- exponent++;
- }
-
- while (mant_bits_left > 0)
- {
- mant_bits = min (mant_bits_left, 32);
-
- mant = get_field (ufrom, fmt->byteorder, fmt->totalsize,
- mant_off, mant_bits);
-
- dto += ldexp ((double) mant, exponent - mant_bits);
- exponent -= mant_bits;
- mant_off += mant_bits;
- mant_bits_left -= mant_bits;
- }
-
- /* Negate it if negative. */
- if (get_field (ufrom, fmt->byteorder, fmt->totalsize, fmt->sign_start, 1))
- dto = -dto;
- *to = dto;
-}
-\f
-static void put_field (unsigned char *, enum floatformat_byteorders,
- unsigned int,
- unsigned int, unsigned int, unsigned long);
-
-/* Set a field which starts at START and is LEN bytes long. DATA and
- TOTAL_LEN are the thing we are extracting it from, in byteorder ORDER. */
-static void
-put_field (unsigned char *data, enum floatformat_byteorders order,
- unsigned int total_len, unsigned int start, unsigned int len,
- unsigned long stuff_to_put)
-{
- unsigned int cur_byte;
- int cur_bitshift;
-
- /* Start at the least significant part of the field. */
- if (order == floatformat_little || order == floatformat_littlebyte_bigword)
- {
- int excess = FLOATFORMAT_CHAR_BIT - (total_len % FLOATFORMAT_CHAR_BIT);
- cur_byte = (total_len / FLOATFORMAT_CHAR_BIT)
- - ((start + len + excess) / FLOATFORMAT_CHAR_BIT);
- cur_bitshift = ((start + len + excess) % FLOATFORMAT_CHAR_BIT)
- - FLOATFORMAT_CHAR_BIT;
- }
- else
- {
- cur_byte = (start + len) / FLOATFORMAT_CHAR_BIT;
- cur_bitshift =
- ((start + len) % FLOATFORMAT_CHAR_BIT) - FLOATFORMAT_CHAR_BIT;
- }
- if (cur_bitshift > -FLOATFORMAT_CHAR_BIT)
- {
- *(data + cur_byte) &=
- ~(((1 << ((start + len) % FLOATFORMAT_CHAR_BIT)) - 1)
- << (-cur_bitshift));
- *(data + cur_byte) |=
- (stuff_to_put & ((1 << FLOATFORMAT_CHAR_BIT) - 1)) << (-cur_bitshift);
- }
- cur_bitshift += FLOATFORMAT_CHAR_BIT;
- if (order == floatformat_little || order == floatformat_littlebyte_bigword)
- ++cur_byte;
- else
- --cur_byte;
-
- /* Move towards the most significant part of the field. */
- while (cur_bitshift < len)
- {
- if (len - cur_bitshift < FLOATFORMAT_CHAR_BIT)
- {
- /* This is the last byte. */
- *(data + cur_byte) &=
- ~((1 << (len - cur_bitshift)) - 1);
- *(data + cur_byte) |= (stuff_to_put >> cur_bitshift);
- }
- else
- *(data + cur_byte) = ((stuff_to_put >> cur_bitshift)
- & ((1 << FLOATFORMAT_CHAR_BIT) - 1));
- cur_bitshift += FLOATFORMAT_CHAR_BIT;
- if (order == floatformat_little || order == floatformat_littlebyte_bigword)
- ++cur_byte;
- else
- --cur_byte;
- }
-}
-
-#ifdef HAVE_LONG_DOUBLE
-/* Return the fractional part of VALUE, and put the exponent of VALUE in *EPTR.
- The range of the returned value is >= 0.5 and < 1.0. This is equivalent to
- frexp, but operates on the long double data type. */
-
-static long double ldfrexp (long double value, int *eptr);
-
-static long double
-ldfrexp (long double value, int *eptr)
-{
- long double tmp;
- int exp;
-
- /* Unfortunately, there are no portable functions for extracting the exponent
- of a long double, so we have to do it iteratively by multiplying or dividing
- by two until the fraction is between 0.5 and 1.0. */
-
- if (value < 0.0l)
- value = -value;
-
- tmp = 1.0l;
- exp = 0;
-
- if (value >= tmp) /* Value >= 1.0 */
- while (value >= tmp)
- {
- tmp *= 2.0l;
- exp++;
- }
- else if (value != 0.0l) /* Value < 1.0 and > 0.0 */
- {
- while (value < tmp)
- {
- tmp /= 2.0l;
- exp--;
- }
- tmp *= 2.0l;
- exp++;
- }
-
- *eptr = exp;
- return value / tmp;
-}
-#endif /* HAVE_LONG_DOUBLE */
-
-
-/* The converse: convert the DOUBLEST *FROM to an extended float
- and store where TO points. Neither FROM nor TO have any alignment
- restrictions. */
-
-void
-floatformat_from_doublest (CONST struct floatformat *fmt, DOUBLEST *from,
- char *to)
-{
- DOUBLEST dfrom;
- int exponent;
- DOUBLEST mant;
- unsigned int mant_bits, mant_off;
- int mant_bits_left;
- unsigned char *uto = (unsigned char *) to;
-
- memcpy (&dfrom, from, sizeof (dfrom));
- memset (uto, 0, (fmt->totalsize + FLOATFORMAT_CHAR_BIT - 1)
- / FLOATFORMAT_CHAR_BIT);
- if (dfrom == 0)
- return; /* Result is zero */
- if (dfrom != dfrom) /* Result is NaN */
- {
- /* From is NaN */
- put_field (uto, fmt->byteorder, fmt->totalsize, fmt->exp_start,
- fmt->exp_len, fmt->exp_nan);
- /* Be sure it's not infinity, but NaN value is irrel */
- put_field (uto, fmt->byteorder, fmt->totalsize, fmt->man_start,
- 32, 1);
- return;
- }
-
- /* If negative, set the sign bit. */
- if (dfrom < 0)
- {
- put_field (uto, fmt->byteorder, fmt->totalsize, fmt->sign_start, 1, 1);
- dfrom = -dfrom;
- }
-
- if (dfrom + dfrom == dfrom && dfrom != 0.0) /* Result is Infinity */
- {
- /* Infinity exponent is same as NaN's. */
- put_field (uto, fmt->byteorder, fmt->totalsize, fmt->exp_start,
- fmt->exp_len, fmt->exp_nan);
- /* Infinity mantissa is all zeroes. */
- put_field (uto, fmt->byteorder, fmt->totalsize, fmt->man_start,
- fmt->man_len, 0);
- return;
- }
-
-#ifdef HAVE_LONG_DOUBLE
- mant = ldfrexp (dfrom, &exponent);
-#else
- mant = frexp (dfrom, &exponent);
-#endif
-
- put_field (uto, fmt->byteorder, fmt->totalsize, fmt->exp_start, fmt->exp_len,
- exponent + fmt->exp_bias - 1);
-
- mant_bits_left = fmt->man_len;
- mant_off = fmt->man_start;
- while (mant_bits_left > 0)
- {
- unsigned long mant_long;
- mant_bits = mant_bits_left < 32 ? mant_bits_left : 32;
-
- mant *= 4294967296.0;
- mant_long = ((unsigned long) mant) & 0xffffffffL;
- mant -= mant_long;
-
- /* If the integer bit is implicit, then we need to discard it.
- If we are discarding a zero, we should be (but are not) creating
- a denormalized number which means adjusting the exponent
- (I think). */
- if (mant_bits_left == fmt->man_len
- && fmt->intbit == floatformat_intbit_no)
- {
- mant_long <<= 1;
- mant_long &= 0xffffffffL;
- mant_bits -= 1;
- }
-
- if (mant_bits < 32)
- {
- /* The bits we want are in the most significant MANT_BITS bits of
- mant_long. Move them to the least significant. */
- mant_long >>= 32 - mant_bits;
- }
-
- put_field (uto, fmt->byteorder, fmt->totalsize,
- mant_off, mant_bits, mant_long);
- mant_off += mant_bits;
- mant_bits_left -= mant_bits;
- }
- if (fmt->byteorder == floatformat_littlebyte_bigword)
- {
- int count;
- unsigned char *swaplow = uto;
- unsigned char *swaphigh = uto + 4;
- unsigned char tmp;
-
- for (count = 0; count < 4; count++)
- {
- tmp = *swaplow;
- *swaplow++ = *swaphigh;
- *swaphigh++ = tmp;
- }
- }
-}
-
-/* Check if VAL (which is assumed to be a floating point number whose
- format is described by FMT) is negative. */
-
-int
-floatformat_is_negative (const struct floatformat *fmt, char *val)
-{
- unsigned char *uval = (unsigned char *) val;
-
- return get_field (uval, fmt->byteorder, fmt->totalsize, fmt->sign_start, 1);
-}
-
-/* Check if VAL is "not a number" (NaN) for FMT. */
-
-int
-floatformat_is_nan (const struct floatformat *fmt, char *val)
-{
- unsigned char *uval = (unsigned char *) val;
- long exponent;
- unsigned long mant;
- unsigned int mant_bits, mant_off;
- int mant_bits_left;
-
- if (! fmt->exp_nan)
- return 0;
-
- exponent = get_field (uval, fmt->byteorder, fmt->totalsize,
- fmt->exp_start, fmt->exp_len);
-
- if (exponent != fmt->exp_nan)
- return 0;
-
- mant_bits_left = fmt->man_len;
- mant_off = fmt->man_start;
-
- while (mant_bits_left > 0)
- {
- mant_bits = min (mant_bits_left, 32);
-
- mant = get_field (uval, fmt->byteorder, fmt->totalsize,
- mant_off, mant_bits);
-
- /* If there is an explicit integer bit, mask it off. */
- if (mant_off == fmt->man_start
- && fmt->intbit == floatformat_intbit_yes)
- mant &= ~(1 << (mant_bits - 1));
-
- if (mant)
- return 1;
-
- mant_off += mant_bits;
- mant_bits_left -= mant_bits;
- }
-
- return 0;
-}
-
-/* Convert the mantissa of VAL (which is assumed to be a floating
- point number whose format is described by FMT) into a hexadecimal
- and store it in a static string. Return a pointer to that string. */
-
-char *
-floatformat_mantissa (const struct floatformat *fmt, char *val)
-{
- unsigned char *uval = (unsigned char *) val;
- unsigned long mant;
- unsigned int mant_bits, mant_off;
- int mant_bits_left;
- static char res[50];
- char buf[9];
-
- /* Make sure we have enough room to store the mantissa. */
- gdb_assert (sizeof res > ((fmt->man_len + 7) / 8) * 2);
-
- mant_off = fmt->man_start;
- mant_bits_left = fmt->man_len;
- mant_bits = (mant_bits_left % 32) > 0 ? mant_bits_left % 32 : 32;
-
- mant = get_field (uval, fmt->byteorder, fmt->totalsize,
- mant_off, mant_bits);
-
- sprintf (res, "%lx", mant);
-
- mant_off += mant_bits;
- mant_bits_left -= mant_bits;
-
- while (mant_bits_left > 0)
- {
- mant = get_field (uval, fmt->byteorder, fmt->totalsize,
- mant_off, 32);
-
- sprintf (buf, "%08lx", mant);
- strcat (res, buf);
-
- mant_off += 32;
- mant_bits_left -= 32;
- }
-
- return res;
-}
/* print routines to handle variable size regs, etc. */
projects / deliverable / binutils-gdb.git / blobdiff